Search Results

Search found 34337 results on 1374 pages for 'build machine'.

Page 47/1374 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

  • Defragging Host OS of VMWare

    - by JackLocke
    Hi All, I want to ask something that has been puzzling me from last few days. I will try to explain my problem as clear as I can ... I have VMWare Workstation installed in my machine. And I use one separate 100Gb drive which stores all of my virtual machines, nothing else. Now, last week I was playing with a De-fragmentation tool called "Smart Defrag" which showed me in its analysis report that my drive where I am currently storing all of my Virtual Machines has more than 80% of fragmentation !!! Now my question is ... What will be the effect on my Guest / VM machine performance if I defrag my Host machine ... I mean this Host machine is essentially storing those virtual machines, but still dont have any direct access to what ever is stored in those machines ... so defraging the host should not cause any problem. But before proceeding, I want to hear from other people who may have met same problem. I will really appreciate any help ... BTW, I am using Windows 7 as Host and the guest machines I am using are Windows 2008 & 2003 & Ubuntu 10.04 THanks, Jack

    Read the article

  • Join Domain from VM

    - by Adis
    I have two VMs running on VMWare Player. I use NAT adapter settings. The host machine for VMs is running on corporate network. First VM has Domain controller running and I can log in on that machine using domain credentials. I named domain wm.local When I run IP config on this machine: IP: 192.168.87.132 Def Gataway: 192.168.87.2 DNS server: 192.168.87.2 DHCP server: 192.168.87.254 Second VM cannot join domain. When I try it with domain WM I'm propmted for credentials. And I enter Administrator credentials and than it waits for some time and I get response: "The specified domain either does not exist or could not be contacted" If i type wm.local as domain when trying to join it does not prompt me to login but just shows "An Active Directory Domain Controller (AD DC) for the domain wm.local could not be contacted. And here it takes no time to get this error message. Ipconfig on this machine: IP: 192.168.87.134 Def Gataway: 192.168.87.2 DNS server: 192.168.87.2 DHCP server: 192.168.87.254 I can ping second VM from first one. And I disabled firewalls on both machines. Any ideas? Is there any manual for this?

    Read the article

  • Company wants to write custom project management tool, rather then use third party product.

    - by Jason Evans
    At the company I work, we are really wanting to get into the agile methodology for developing software. One thing that I'm not excited about is the fact that management wants us to build a custom project management feature inside the company's Intranet. I think this is a total waste of time. There are many great third party tools available (e.g. Axosoft OnTime) that can do everything we need, and more. For how much development time it would cost us to build our own project management module, we could buy numerous licences for a third party product. One concern is that, whilst we are writing code for a client, and using our custom Intranet project management module, we find bugs in the module that need fixing ASAP. That means having to stop work on the client code to fix the Intranet. That just puts shivers down my spine. Another worry I have is lack of functionality. This custom module is going to be so basic, that it will just feel really crap to use. That might sound a bit snooty, but for goodness sake, many third party tools are so feature rich, that the idea of having to write our own tool makes feel very uneasy. In fact, I can't be bothered. What do you guys think? I'm going to raise this issue with my boss, since I feel it's such an important topic to talk about. EDIT: Thanks for the great responses, much appreciated. To summarize some of them: Money Naturally my boss does want to save money, by not forking out a few hundred £'s for licences. However, for us to write a custom tool, it will take x number of days, multiplied by approx £500, which is our costs. I don't see the business value in this. Management have mentioned that they want to sell the Intranet as a product in the future, but it's so custom to our needs (and downright basic), that in order to give it to another client, I can see us having to fork a version of the code and rebuild the majority of it anyway. So it's not like we're gaining anything there in reuse. Features Having our own custom module means not feature bloat - only the functionality we require will be in the product. My issue is that there are plenty of free, open-source project management tools out there with minimal features already. So even if cost is an issue, we could look into open-source. Again it all boils down to the fact that I don't see the point in writing a project management tool in this day and age. It's a bit like writing your own web browser - why?, what's the point? Although management are asking for this tool, just because they are, it does not mean I'm going to please them and do it just because they asked for it. If something does not make sense, then I will raise it as a concern. At the end of the day, it's the developers who write the code, it's the developers who make money for a business. Thus, as far I'm concerned, the devs have a very big role in deciding how a company should manage projects and what tools are used. "I am Spartan, argh!" :) Hmm, I've not been able to make this question a wiki for some reason, thus I'm going to have to pick an answer to accept. Cheers. Jas.

    Read the article

  • How to get MSBuild Exec to run a java program?

    - by Vaccano
    I am trying to run a command line action in my Team Build (MSBuild). When I run it on the command line of the build machine it works fine. But when run in the build script I get a "exited with code 3". This is command that I am running: C:\Program Files\Wavelink\Avalanche\PackageBuilder.\jresdk\bin\java -classpath "WLUtil.jar;WLPackageBuilder.jar" com.wavelink.buildpkg.AvalanchePackageBuilder /build PackageName This command only works when run from the above directory (I have tried running it from c:\ with the full path at it fails). When I try to run it using ms build this is my statement: <PropertyGroup> <!--Working directory of the Package Builder Call--> <PkgBldWorkingDir>&quot;C:\Program Files\Wavelink\Avalanche\PackageBuilder&quot;</PkgBldWorkingDir> <!--Command line to run to make Package builder "go"--> <PkgBldRun>.\jresdk\bin\java&quot; -classpath &quot;WLUtil.jar;WLPackageBuilder.jar&quot; com.wavelink.buildpkg.AvalanchePackageBuilder</PkgBldRun> </PropertyGroup> <!--Run package builder command line to update the Ava File.--> <Exec ContinueOnError="true" WorkingDirectory="$(PackageBuilderWorkingDir)" Command="$(PkgBldRun) /build PackageName"/> As I said above this "exits with code 3". This is the full output: Task "Exec" Command: .\jresdk\bin\java -classpath "WLUtil.jar;WLPackageBuilder.jar" com.wavelink.buildpkg.AvalanchePackageBuilder /build PackageName The system cannot find the path specified. MSBUILD : warning MSB3073: The command ".\jresdk\bin\java -classpath "WLUtil.jar;WLPackageBuilder.jar" com.wavelink.buildpkg.AvalanchePackageBuilder /build PackageName" exited with code 3. The previous error was converted to a warning because the task was called with ContinueOnError=true. Build continuing because "ContinueOnError" on the task "Exec" is set to "true". Done executing task "Exec" -- FAILED. It says it can't find the file (who knows what file). I have tried it with and without the quotes (") in the working directory and with a full path as the command (gives the same error as when run on the command line). Any ideas on how to make this run a command line action in MS Build?

    Read the article

  • How to compile jsoup through Ant?

    - by JackWM
    I tried to use Ant to compile the jsoup source. I can compile successfully, but cannot pass the test. Here is the process: jsoup version: 1.6.3 ; Ant version: 1.8.2 the source of jsoup is in the directory src/ I made a build file src/build.xml This file contains <project name="jsoup"> <target name="compile"> <mkdir dir="build/classes"/> <javac srcdir="src" destdir="build/classes" includeantruntime="false"/> </target> <target name="jar"> <mkdir dir="build/jar"/> <jar destfile="build/jar/jsoup.jar" basedir="build/classes"> <manifest> <attribute name="Main-Class" value="StateTrace"/> </manifest> </jar> </target> <target name="run"> <!--<java jar="build/jar/jsoup.jar" input="htmls/index.html" fork="true"/>--> <exec executable="java"> <arg value="-jar"/> <arg value="build/jar/jsoup.jar"/> <arg value="htmls/index.html"/> </exec> </target> </project> Note: 1. StateTrace.java is my own test program; 2. htmls/index.html is the input to StateTrace.java. Then I compile and run it with Ant: > ant compile > ant jar > ant run After this, I got err like: run: [exec] Exception in thread "main" java.lang.ExceptionInInitializerError [exec] at org.jsoup.nodes.Entities$EscapeMode.<clinit>(Unknown Source) [exec] at org.jsoup.nodes.Document$OutputSettings.<init>(Unknown Source) [exec] at org.jsoup.nodes.Document.<init>(Unknown Source) [exec] at org.jsoup.parser.TreeBuilder.initialiseParse(Unknown Source) [exec] at org.jsoup.parser.TreeBuilder.parse(Unknown Source) [exec] at org.jsoup.parser.HtmlTreeBuilder.parse(Unknown Source) [exec] at org.jsoup.parser.Parser.parse(Unknown Source) [exec] at org.jsoup.Jsoup.parse(Unknown Source) [exec] at StateTrace.main(Unknown Source) [exec] Caused by: java.lang.NullPointerException [exec] at java.util.Properties$LineReader.readLine(Properties.java:418) [exec] at java.util.Properties.load0(Properties.java:337) [exec] at java.util.Properties.load(Properties.java:325) [exec] at org.jsoup.nodes.Entities.loadEntities(Unknown Source) [exec] at org.jsoup.nodes.Entities.<clinit>(Unknown Source) [exec] ... 9 more [exec] Result: 1 BUILD SUCCESSFUL Total time: 0 seconds However, if I manually compiled all the java source, like javac src/org/jsoup/*.java src/org/jsoup/parser/*.java src/org/jsoup/examples/*.java src/org/jsoup/nodes/*.java src/org/jsoup/safety/*.java src/org/jsoup/select/*.java src/org/jsoup/helper/*.java I could compile successfully and pass my test. Any clue? Thanks!

    Read the article

  • How to wire finite state machine into component-based architecture?

    - by Pup
    State machines seem to cause harmful dependencies in component-based architectures. How, specifically, is communication handled between a state machine and the components that carry out state-related behavior? Where I'm at: I'm new to component-based architectures. I'm making a fighting game, although I don't think that should matter. I envision my state machine being used to toggle states like "crouching", "dashing", "blocking", etc. I've found this state-management technique to be the most natural system for a component-based architecture, but it conflicts with techniques I've read about: Dynamic Game Object Component System for Mutable Behavior Characters It suggests that all components activate/deactivate themselves by continually checking a condition for activation. I think that actions like "running" or "walking" make sense as states, which is in disagreement with the accepted response here: finite state machine used in mario like platform game I've found this useful, but ambiguous: How to implement behavior in a component-based game architecture? It suggests having a separate component that contains nothing but a state machine. But, this necessitates some kind of coupling between the state machine component and nearly all the other components. I don't understand how this coupling should be handled. These are some guesses: A. Components depend on state machine: Components receive reference to state machine component's getState(), which returns an enumeration constant. Components update themselves regularly and check this as needed. B. State machine depends on components: The state machine component receives references to all the components it's monitoring. It queries their getState() methods to see where they're at. C. Some abstraction between them Use an event hub? Command pattern? D. Separate state objects that reference components State Pattern is used. Separate state objects are created, which activate/deactivate a set of components. State machine switches between state objects. I'm looking at components as implementations of aspects. They do everything that's needed internally to make that aspect happen. It seems like components should function on their own, without relying on other components. I know some dependencies are necessary, but state machines seem to want to control all of my components.

    Read the article

  • C Problem with Compiler?

    - by Solomon081
    I just started learning C, and wrote my hello world program: #include <stdio.h> main() { printf("Hello World"); return 0; } When I run the code, I get a really long error: Apple Mach-O Linker (id) Error Ld /Users/Solomon/Library/Developer/Xcode/DerivedData/CProj-cwosspupvengheeaapmkrhxbxjvk/Build/Products/Debug/CProj normal x86_64 cd /Users/Solomon/Desktop/C/CProj setenv MACOSX_DEPLOYMENT_TARGET 10.7 /Developer/usr/bin/clang -arch x86_64 -isysroot /Developer/SDKs/MacOSX10.7.sdk -L/Users/Solomon/Library/Developer/Xcode/DerivedData/CProj-cwosspupvengheeaapmkrhxbxjvk/Build/Products/Debug -F/Users/Solomon/Library/Developer/Xcode/DerivedData/CProj-cwosspupvengheeaapmkrhxbxjvk/Build/Products/Debug -filelist /Users/Solomon/Library/Developer/Xcode/DerivedData/CProj-cwosspupvengheeaapmkrhxbxjvk/Build/Intermediates/CProj.build/Debug/CProj.build/Objects-normal/x86_64/CProj.LinkFileList -mmacosx-version-min=10.7 -o /Users/Solomon/Library/Developer/Xcode/DerivedData/CProj-cwosspupvengheeaapmkrhxbxjvk/Build/Products/Debug/CProj ld: duplicate symbol _main in /Users/Solomon/Library/Developer/Xcode/DerivedData/CProj-cwosspupvengheeaapmkrhxbxjvk/Build/Intermediates/CProj.build/Debug/CProj.build/Objects-normal/x86_64/helloworld.o and /Users/Solomon/Library/Developer/Xcode/DerivedData/CProj-cwosspupvengheeaapmkrhxbxjvk/Build/Intermediates/CProj.build/Debug/CProj.build/Objects-normal/x86_64/main.o for architecture x86_64 Command /Developer/usr/bin/clang failed with exit code 1 I am running xCode Should I reinstall DevTools?

    Read the article

  • Synchronizing Mysql Table Schema [on hold]

    - by user1122069
    I have some difficulty keeping track of my SQL changes in a text file in SVN. One solution that I am aware of is to put the SQL queries in files (1.sql, 2.sql...) and to manually load each file at the proper time. Besides missing commas, the process is too cumbersome when builds become more frequent. I have actually taken to asking a co-worker to send me his SQL changes on Skype and we just apply the changes immediately on our local, development, and production servers (using three PhpMyAdmin tabs). I have seen several GUI tools mentioned in similar questions on SO, but these are actually more work and less automated than the aforementioned methods. Is there any standardized process by which this is done in an automated way? I can only guess that large companies build their own mechanisms of keeping track of database schema changes (yet I can't find a word about it - maybe they use files?). This question was closed as off-topic on Stack Overflow, so I am re-posting it here.

    Read the article

  • vmware linux headers not found for ubuntu 10.10 ?

    - by Tumbleweed
    I've installed Vmware 6.5 on Ubuntu 10.10... when I start vmware player/workstation its asking for linux kernel header for some compilation but I'm not able to find the appropriate package, see the Image below.... Update after running following commands sudo -s cd /lib/modules/$(uname -r)/build/include/linux ln -s ../generated/utsrelease.h ln -s ../generated/autoconf.h Error has been changed like below.... ERROR: modinfo: could not find module vmmon ERROR: modinfo: could not find module vmnet ERROR: modinfo: could not find module vmblock ERROR: modinfo: could not find module vmci ERROR: modinfo: could not find module vsock Using 2.6.x kernel build system. make: Entering directory /tmp/vmware-root/modules/vmmon-only' make -C /lib/modules/2.6.35-22-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules make[1]: Entering directory/usr/src/linux-headers-2.6.35-22-generic' CC [M] /tmp/vmware-root/modules/vmmon-only/linux/driver.o In file included from /tmp/vmware-root/modules/vmmon-only/linux/driver.c:31: /tmp/vmware-root/modules/vmmon-only/./include/compat_wait.h:78: error: conflicting types for ‘poll_initwait’ include/linux/poll.h:72: note: previous declaration of ‘poll_initwait’ was here

    Read the article

  • Format External HD on Airport Extreme Base Station?

    - by David.Chu.ca
    I just got an Airport Extreme Base Station. I am planning to use this one replace my current Linksys router. This works fine. My another purpose of getting this device is to use its USB port to connect to several external HDs as my backup Time Machine. I can see one 500GB HD through Airport Base Station. However, I cannot format it by using Disk Utility. What I did is to connect the HD to my iMac directly first and then clean and format the disk by Disk Utility application. Then I move the HD to the Airport Base Station. After that I can designate the HD as my Time Machine destination. Is there any way to format the HD connected to Airport Base Station? Any issues to use an external HD through Airport Base Station for Time Machine backups?

    Read the article

  • Hour-long shutdown duration "shutting down hyper-v virtual machine management service"

    - by icelava
    I have a Windows 2008 R2 server that is a Hyper-V host (Dell PowerEdge T300). Today for the first time I encountered an odd situation; i lost connection with one of the guest machines but logging on physically it seems the guest OS is still running but no longer contactable via the network. I tried to shut down the guest machine (Windows XP) but it would not shut down, getting stuck in a "Not responding" dialog box that cannot be dismissed. I used the Hyper-V management console to reset the machine and it could not get out of resetting state. I tried to save another Windows 2003 guest machine, and it would be progress with its Saving state (0%). The other running Windows 2003 guest was stuck in the logon dialog. My first suspicion is perhaps one of the Windows update patches this week (10 Nov 2011) may something to do with it, which was still pending a system restart. Well, since I could not do anything with Hyper-V i proceeded with the Windows Update restart, and now it is stuck half an hour at "Shutting down hyper-v virtual machine management service" Prior to restarting I did not observe any hard disk errors reported in the system event log; doubt it is a disk-related condition. Shall I force a hard reboot? UPDATE Ok so i left it hanging over an hour while attending to other matters, and thankfully the host cleanly restarted. I can operate the guest machines fine now. Phew. Hyper-V must have been crawling for some reason. The VMs have been observed to become slow in the past when the host has been up for a long duration (two weeks to a month), but never this slow. Would love to know what types of performance monitoring items i can observe to give a hint why this can happen. UPDATE 2012-02-13 In the months ever since, Hyper-V has stalled into this state another two times. It appears so randomly and without any error event logs to hint what is causing it enter this "drunkard" state. Just an Hyper-V management service timeout. Log Name: System Source: Service Control Manager Date: 13/2/2012 9:16:48 AM Event ID: 7043 Task Category: None Level: Error Keywords: Classic User: N/A Computer: elune Description: The Hyper-V Virtual Machine Management service did not shut down properly after receiving a preshutdown control. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" /> <EventID Qualifiers="49152">7043</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2012-02-13T01:16:48.882901900Z" /> <EventRecordID>567844</EventRecordID> <Correlation /> <Execution ProcessID="764" ThreadID="8484" /> <Channel>System</Channel> <Computer>elune</Computer> <Security /> </System> <EventData> <Data Name="param1">Hyper-V Virtual Machine Management</Data> </EventData> </Event> The only means out of it is to restart the system.

    Read the article

  • running a web server with encrypted file system (all or part of it)

    - by Carlos
    Hi, I need a webserver (lamp) running inside a virtual machine (#1) running as a service (#2) in headless mode (#3) with part or the whole filesystem encrypted (#4). The virtual machine will be started with no user intervention and provide access to a web application for users in the host machine. Points #1,#2 and #3 are checked and proved to be working fine with Sun VirtualBox, so my question is for #4: Can I encrypt the all filesystem and still access the webserver (using a browser) or will grub ask me for a password? If encrypting the all filesystem is not an option, can I encrypt only /home and /var/www ? will apache/php be able to use files in /home or /var/www without asking for a password or mounting these partitions manually? Thanks

    Read the article

  • How can I access a Web server in a VM from an iPad?

    - by Nick Haslam
    I have a virtual machine (running Windows Server 2012, if it's relevant), on VMware Workstation. It is running an Apache Tomcat web server, and I'm wanting to access that webserver from an iPad. Is this feasible, or even possible ? I have tried running Connectify Hotspot on the host machine, but that only gets me as far as being able to access a webpage on the host machine. It doesn't look to pass the connection through to the VM as they are on different subnets. Any thoughts are gratefully received.

    Read the article

  • safe to setup NAS in virtual image with web server?

    - by Erik
    My current setup is Ubuntu Desktop, running Apache + MySQL + PHP stack. I use this image to host my small website to the outside world. I want to now run a virtual machine on the box, that will act as the FreeNAS box for my internal network. This sounds like a bad idea if the website gets hacked/attacked. Should I just give up and grab a dedicated machine instead? Can I instead virtualize the web server and NAS side by side on this machine?

    Read the article

  • backup of KVM VM's running on Ubuntu 12.4.1 precise edition from a remote machine

    - by Dr. Death
    I am creating a library API which will take the backup of all the VM's running on KVM hypervisor. My VM's can be of any type. I am taking this backup from a remote machine and need to put the backup at remote server. I have KVM, Libvirt installed on my system. Some of my VM's are LVM based and some are normal VM's running on KVM. I research and found out an excellent perl script for taking the backup http://pof.eslack.org/2010/12/23/best-solution-to-fully-backup-kvm-virtual-machines/ but since I am developing this library in C++ I cannot use it however it has given me a good understanding of how it will work. One thing I didnot able to sort out is if my VM's are not created using virt-manager or are created using any other tool them virsh system list command does not give them in the list of running VM's however they are running perfectly on my KVM server. Is there a way to list these VM's in my system list anyhow? secondly, when I am taking backup from the remote machine I am getting out of my ssh mode as soon as my libvirt command finishes and for every command I need to ssh again, Is there a way that I do not need to ssh each and every time? I have already used the rsa key for ssh but when once my command finishes my control moves to the remote machine again and try to find out my source VM location in remote machine's local drives which in turn fails it. here is the main problem I am facing. also for the LVM based VM I am able to take the live backup but for non LVM based my machines are getting suspended and not been able to take the live backup. Since my library will work on the remote machine only I might not know the VM's configruation on the KVM server. so need to make it consistent for all the VM's. Please share any thing related to this issue so that I may be able to take the live backup of the non lvm vm's also. I'll update my working and any research findings time to time to all of you. Thanks in advance for your suggestions in these regards.

    Read the article

  • GenerateDSYMFile warning: unable to open object file

    - by regulus6633
    The background: I have a project that I last built on 10.5 on a PPC computer using xcode v3.1. It builds against the 10.4 SDK. I now have a MacBook with 10.6 on it and Xcode v3.2.1. I installed the 10.4 SDK with xcode. So now I want to build the project on an intel chip on 10.6. I first get a build error because I have the wrong version of gcc setup so I change the build settings to use gcc 4.0. The problem: Now when I build the project I get the following warning: GenerateDSYMFile "build/Release/What's Keeping Me?.app.dSYM" "build/Release/What's Keeping Me?.app/Contents/MacOS/What's Keeping Me?" cd "/Users/hmcshane/Development/ Cocoa Projects/What's Keeping Me?" /Developer/usr/bin/dsymutil "/Users/hmcshane/Development/ Cocoa Projects/What's Keeping Me?/build/Release/What's Keeping Me?.app/Contents/MacOS/What's Keeping Me?" -o "/Users/hmcshane/Development/ Cocoa Projects/What's Keeping Me?/build/Release/What's Keeping Me?.app.dSYM" warning: (i386) /Users/hmcshane/Downloads/Csu-71/crt.dynamic_no_pic.o unable to open object file warning: (ppc7400) /Users/hmcshane/Downloads/Csu-71/crt.dynamic_no_pic.o unable to open object file Any idea what this is? And why is the path for the problem files rooted in my downloads folder? The project certainly doesn't reside there.

    Read the article

  • iPhone 4.0 on iPhone but still Ad-Hoc compile for 3.1.3?

    - by Mark
    Device: Version : 3.1 Build: 3511 Device: iPhone OS: iPhone OS 4.0 xCode 3.2.2 (Old) xCode 3.2.3 (New; For iPhone 4.0 Beta) Background: As you can see I installed 4.0 on my iPhone as I read on this forum it's really hard to near impossible to downgrade back to 3.1.3, but it's my only device I have and use for development. When I try to continue to develop and build with the old xCode it tells me that "No provisioned iPhone OS device is connected". When I select Simulator it does compile and build, however when I spread this file it does not work on the devices of my testers, they get a Signed error. When I run the new xCode, it does compile and build on the Device and when I spread this file, it does work on the devices of my testers (which are running the current official version 3.1.3). Questions: Why is there a difference between building for Simulator and Device? A simulator build never seem to work on the devices of my testers because of signing issues and the build for device does work. Currently it seems the old xCode became useless, however I read that you may not use the Beta xCode to build your application for release. So knowing the above how am I able to pull this off with my current setup due the fact the old xCode won't let me build properly.

    Read the article

  • Layout of Ant build.xml with junit tests

    - by Derk
    In a project I have a folder src for all application source code and a different folder test for all junit test (both with a simular package hierarchy). Now I want that Ant can run all tests in in test folder, bot the problem is that now also files in the src folder with "Test" in the filename are included. This is the test target in the build.xml: <target name="test" depends="build"> <mkdir dir="reports/tests" /> <junit fork="yes" printsummary="yes"> <formatter type="xml"/> <classpath> <path location="${build}/WEB-INF/classes"/> <fileset dir="${projectname.home}/lib"> <include name="servlet-api.jar"/> <include name="httpunit.jar"/> <include name="Tidy.jar"/> <include name="js.jar"/> <include name="junit.jar"/> </fileset> </classpath> <batchtest todir="reports/tests"> <fileset dir="${build}/WEB-INF/classes"> <include name="**/*Test.class"/> </fileset> </batchtest> </junit> And I have added the test folder to the build target: <target name="build" depends="init,init-props,prepare"> <javac source="1.5" debug="true" destdir="${build}/WEB-INF/classes"> <src path="src" /> <src path="test" /> <classpath refid="classpath"/> </javac> </target>

    Read the article

  • EC2 persistence of machine

    - by Seagull
    I want to 'persist' my Amazon EC2 images. My scenario: I have a range of Windows and Linux machines Some machines are EBS backed, whereas others are S3 backed. I need to be able to persist a machine (put it to sleep), preferably keeping all settings active I had them when the machine was running. I need to be able to quickly wake up a machine from sleep [Ideally with an SLA of less than 2 min to turn-on, if such an SLA is available with Amazon]. Here's the stuff that confuses me: AWS allows me to put EBS backed machines to sleep, but not S3 backed. I believe I can put S3 machines into some sort of persistence mode. But this involves shutting down the machine, writing it to S3 storage and then recovering from there (not a real sleep mode, but at least I don't continue to get billed for CPU). S3 backing seems to take a long time to either writing a machine to disk, or to recover (turn on a machine). I can't tell immediately which machines are EBS backed and which are S3 backed? It seems like I can instantiate either type, but it's not immediately clear how Amazon decided whether a given machine should be EBS or S3 backed. Advice?

    Read the article

  • Strange build issue using Flex Mojo. Looking for troubleshooting suggestions.

    - by WeeJavaDude
    I have ran into a strange issue and I was hoping for some suggeestion on how to attack the problem. Here is the environment. 1) We develop locally using Flex Builder. 2) We use QuickBuild with FlexMojo 3.4.2 for test builds and production 3) In both cases we don't believe optimization is enabled. What we are seeing is some strange behavior relating to the Ctrl-Enter key when doing testing on IE only in our test environment but not locally. By copying some files over locally I have narrowed the issue down to swf files differences. We do see a difference in the size of swf files in our test environment vs our local environments. Couple things that would help me in troubleshooting would be. 1) Is there a way to know what exactly is in the SWF file? What SWCs are included. 2) How does one compare compile settings between a maven mojo configuration and Flex IDE envioronment? Any thoughts or opinions would be very helpful.

    Read the article

  • VS 2008 C++ build output?

    - by STingRaySC
    Why when I watch the build output from a VC++ project in VS do I see: 1Compiling... 1a.cpp 1b.cpp 1c.cpp 1d.cpp 1e.cpp [etc...] 1Generating code... 1x.cpp 1y.cpp [etc...] The output looks as though several compilation units are being handled before any code is generated. Is this really going on? I'm trying to improve build times, and by using pre-compiled headers, I've gotten great speedups for each ".cpp" file, but there is a relatively long pause during the "Generating Code..." message. I do not have "Whole Program Optimization" nor "Link Time Code Generation" turned on. If this is the case, then why? Why doesn't VC++ compile each ".cpp" individually (which would include the code generation phase)? If this isn't just an illusion of the output, is there cross-compilation-unit optimization potentially going on here? There don't appear to be any compiler options to control that behavior (I know about WPO and LTCG, as mentioned above). EDIT: The build log just shows the ".obj" files in the output directory, one per line. There is no indication of "Compiling..." vs. "Generating code..." steps. EDIT: I have confirmed that this behavior has nothing to do with the "maximum number of parallel project builds" setting in Tools - Options - Projects and Solutions - Build and Run. Nor is it related to the MSBuild project build output verbosity setting. Indeed if I cancel the build before the "Generating code..." step, the ".obj" files will not exist for the most recent set of "compiled" files. E.g., if I cancel the build during "c.cpp" above, I will see only "a.obj" and "b.obj".

    Read the article

  • How to write rule for ICU genrb and pkgdata for boost-build?

    - by sandy
    jamroot.jam rule genrb ( sources + : requirements * ) # create *.res files in binary directory { local result ; for local r in $(sources) { res $(r:B) : $(r) ; } } res.jam type.register RES : res ; type.register TXT : txt ; generators.register-standard res.resource : TXT : RES ; actions resource { $(icu_home)\bin64\genrb "-d$(<:D)" "$()" } I need to run pkgdata with parameters: pkgdata [-options] [-] [packageFile] packageFile is a text file containing the list of res-files to package.

    Read the article

  • Complete machine freezes...at a loss

    - by user28818
    Guys, We built around 12 machines a few months ago to run Ubuntu. They each have the following specs: ASUS Z8NA-D6 motherboard Dual quad core Intel(R) Xeon(R) CPU E5520 @ 2.27GHz OCZ Mod Extreme Pro 500W power supply 12 GB Kingston RAM Nvidia GeForce 9800 GT graphics card My machine ran well for awhile. However, it started experiencing random lockups. These lockups are not X lockups, they are complete system freezes. The nic stops responding, the magic sysrq buttons won't work. The machine is dead. I first suspected RAM. Memtest86 didn't find anything, but I replaced the RAM anyway. Still, lockups. So I replaced the graphics card. Still, more lockups. They became more and more frequent and started to happen 2-3 times a day. So I replaced the motherboard and power supply in one fell swoop. Suddenly, no more lockups! Woohoo! Except, a week later, in the morning, the machine wouldn't wake up. I reset it, started it up, and the log files showed the last entry at around 11 pm the evening before. This has started occurring with more frequency...now just about every morning I come in, the machine is locked up, and has been since the night before. Yesterday, in the 3 weeks since I replaced the motherboard and power supply, the machine actually locked up on in in mid-work. This is the first time since replacing the two (MB and PS) that this happened while I was using it. All others occurred while I was away. I'm at a loss. Nothing is in syslog or message that would indicate a problem around the time of the lockup. Temps are good...I use lmsensors to monitor and have a script that writes the output to file every minute. They never get that high. The only thing I haven't replaced at this point is the case and the harddrives. I doubt either could be the cause. What would you do if you were in my shoes? Is there a troubleshooting approach I'm missing? For the record, all of the other machines, all eleven of them, don't have any problems. They're all running the same version of Ubuntu (Lucid) that I am. Thanks!

    Read the article

  • Consecutive build of VS2005 and VS2008 C++ projects causes LNK1104 error

    - by TestAccount
    I have VS2005 and VS2008 installed on the same machine. I also have a common codebase that I build using both '05 and '08. For this purpose, I have 2 VC projects.. A '08 project called XYZ_2008.vcproj and a '05 project called XYZ_2005.vcproj, and the corresponding 2 slns as well. Both projects output dlls, libs and pdbs to the same output directory (all with appropriate _2005 and _2008 suffixes). Assuming that I am starting from a clean state, I first open XYZ_2005.sln (containing XYZ_2005.vcproj) in VS2005 and build it successfully. Then I close VS2005. Next, I open XYZ_2008.sln (containing XYZ_2008.vcproj) and build (not rebuild) it. At this point, I get an error saying: LINK : fatal error LNK1104: cannot open file 'mfc80u.lib' If now I rebuild the '08 solution, the error goes away and the build succeeds. The build also succeeds if I directly do a rebuild instead of a build for the '08 sln. In spite of everything being separate, the VS08 build seems to be picking up a MFC8 file (from VS05) instead of a MFC9 file. Can somebody please help out with this issue? Thanks in advance!

    Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >