Search Results

Search found 2400 results on 96 pages for 'ceiling cat'.

Page 47/96 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

  • Centos/OVH: public IP on KVM virtual machine

    - by Sébastien
    Since a few days, I'm trying to configure my KVM vm to have a public IP address, without any success. First, I'm on OVH, and you need to know they don't allow networking from different mac addresses. I have so registered a virtual mac address associated with my failover IP Here's my configuration: Guest wanted IP: 46.105.40.x Host IP: 176.31.240.x Host configuration dummy0 interface: ifcfg-dummy0 BOOTPROTO=static IPADDR=10.0.0.1 NETMASK=255.0.0.0 ONBOOT=yes NM_CONTROLLED=no ARP=yes BRIDGE=br0 br0 bridge: ifcfg-br0 DEVICE=br0 TYPE=Bridge DELAY=0 ONBOOT=yes BOOTPROTO=static IPADDR=192.168.1.1 NETMASK=255.255.255.0 PEERDNS=yes NM_CONTROLLED=no ARP=yes Failover ip is redirected to the br0 bridge with ip route add 46.105.40.xxx dev br0 > cat /proc/sys/net/ipv4/ip_forward 1 > cat /proc/sys/net/ipv4/conf/vnet0/proxy_arp 1 > route -n Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 176.31.240.254 0.0.0.0 UG 0 0 0 eth0 46.105.40.x 0.0.0.0 255.255.255.255 UH 0 0 0 br0 176.31.240.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 Guest configuration: KVM: <interface type='bridge'> <mac address='02:00:00:30:22:05'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </interface> I've borrowed most of the OVH configuration here (in french, http://guides.ovh.com/BridgeClient) for the guest configuration eth0 interface: ifcfg-eth0 DEVICE="eth0" BOOTPROTO=none HWADDR="02:00:00:30:22:05" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet" UUID="e9138469-0d81-4ee6-b5ab-de0d7d17d1c8" USERCTL=no PEERDNS=yes IPADDR=46.105.40.xxx NETMASK=255.255.255.255 GATEWAY=176.31.240.254 ARP=yes For the routes, I have in route-eth0: 176.31.240.254 dev eth0 default via 176.31.240.254 dev eth0 With this configuration, I don't have any access to the internet. The only thing I can do is to ping the public ip of the host, nothing more. My final conclusion is that the route does not work, because, when, on the guest, I run ping 8.8.8.8, I have, on the host: > tcpdump -i vnet0 icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on br0, link-type EN10MB (Ethernet), capture size 65535 bytes 13:38:09.009324 IP 46-105-40-xxx.kimsufi.com > google-public-dns-a.google.com: ICMP echo request, id 50183, seq 1, length 64 13:38:09.815344 IP 46-105-40-xxx.kimsufi.com > google-public-dns-a.google.com: ICMP echo request, id 50183, seq 2, length 64 I never get the ping reply, only the request. It seems Guest - Host communication is fine. On eth0: > tcpdump -i eth0 icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 13:39:40.240561 IP 46-105-40-xxx.kimsufi.com > google-public-dns-a.google.com: ICMP echo request, id 50439, seq 1, length 64 13:39:40.250161 IP google-public-dns-a.google.com > 46-105-40-xxx.kimsufi.com: ICMP echo reply, id 50439, seq 1, length 64 I have the request and the reply on eth0, but reply is not forwarded to the bridge. I really don't understand why, I though it was the aim of the route to do that! IPtables is disabled on both host and guest. I really hope some of you will be able to help me! Many thanks in advance, Sébastien

    Read the article

  • Raid 1 array won't assemble after power outage. How do I fix this ext4 mirror?

    - by Forkrul Assail
    Two ext4 drives on Raid 1 with mdadm won't reassemble after the power went out for an extended period (UPS drained). After turning the machine back on, mdadm said that the array was degraded, after which it took about 2 days for a full resync, which completed without problems. On trying to remount the array I get: mount: you must specify the filesystem type cat /etc/fstab lines relevant to setup: /dev/md127 /media/mediapool ext4 defaults 0 0 dmesg | tail (on trying to mount) says: [ 1050.818782] EXT3-fs (md127): error: can't find ext3 filesystem on dev md127. [ 1050.849214] EXT4-fs (md127): VFS: Can't find ext4 filesystem [ 1050.944781] FAT-fs (md127): invalid media value (0x00) [ 1050.944782] FAT-fs (md127): Can't find a valid FAT filesystem [ 1058.272787] EXT2-fs (md127): error: can't find an ext2 filesystem on dev md127. cat /proc/mdstat says: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md127 : active (auto-read-only) raid1 sdj[2] sdi[0] 2930135360 blocks super 1.2 [2/2] [UU] unused devices: <none> fsck /dev/md127 says: fsck from util-linux 2.20.1 e2fsck 1.42 (29-Nov-2011) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/md127 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> mdadm -E /dev/sdi gives me: /dev/sdi: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 37ac1824:eb8a21f6:bd5afd6d:96da6394 Name : sojourn:33 Creation Time : Sat Nov 10 10:43:52 2012 Raid Level : raid1 Raid Devices : 2 Avail Dev Size : 5860271016 (2794.40 GiB 3000.46 GB) Array Size : 2930135360 (2794.39 GiB 3000.46 GB) Used Dev Size : 5860270720 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors State : clean Device UUID : 3e6e9a4f:6c07ab3d:22d47fce:13cecfd0 Update Time : Tue Nov 13 20:34:18 2012 Checksum : f7d10db9 - correct Events : 27 Device Role : Active device 0 Array State : AA ('A' == active, '.' == missing) boot@boot ~ $ sudo mdadm -E /dev/sdj /dev/sdj: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 37ac1824:eb8a21f6:bd5afd6d:96da6394 Name : sojourn:33 Creation Time : Sat Nov 10 10:43:52 2012 Raid Level : raid1 Raid Devices : 2 Avail Dev Size : 5860271016 (2794.40 GiB 3000.46 GB) Array Size : 2930135360 (2794.39 GiB 3000.46 GB) Used Dev Size : 5860270720 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors State : clean Device UUID : 7fb84af4:e9295f7b:ede61f27:bec0cb57 Update Time : Tue Nov 13 20:34:18 2012 Checksum : b9d17fef - correct Events : 27 Device Role : Active device 1 Array State : AA ('A' == active, '.' == missing) machine@user ~ dmesg | tail [ 61.785866] init: alsa-restore main process (2736) terminated with status 99 [ 68.433548] eth0: no IPv6 routers present [ 534.142511] EXT4-fs (sdi): ext4_check_descriptors: Block bitmap for group 0 not in group (block 2838187772)! [ 534.142518] EXT4-fs (sdi): group descriptors corrupted! [ 546.418780] EXT2-fs (sdi): error: couldn't mount because of unsupported optional features (240) [ 549.654127] EXT3-fs (sdi): error: couldn't mount because of unsupported optional features (240) Since this is Raid 1 it was suggested that I try and mount or fsck the drives separately. After a long fsck on one drive, it ended with this as tail: Illegal double indirect block (2298566437) in inode 39717736. CLEARED. Illegal block #4231180 (2611866932) in inode 39717736. CLEARED. Error storing directory block information (inode=39717736, block=0, num=1092368): Memory allocation failed Recreate journal? yes Creating journal (32768 blocks): Done. *** journal has been re-created - filesystem is now ext3 again *** The drive however still doesn't want to mount: dmesg | tail [ 170.674659] md: export_rdev(sdc) [ 170.675152] md: export_rdev(sdc) [ 195.275288] md: export_rdev(sdc) [ 195.275876] md: export_rdev(sdc) [ 1338.540092] CE: hpet increased min_delta_ns to 30169 nsec [26125.734105] EXT4-fs (sdc): ext4_check_descriptors: Checksum for group 0 failed (43502!=37987) [26125.734115] EXT4-fs (sdc): group descriptors corrupted! [26182.325371] EXT3-fs (sdc): error: couldn't mount because of unsupported optional features (240) [27083.316519] EXT4-fs (sdc): ext4_check_descriptors: Checksum for group 0 failed (43502!=37987) [27083.316530] EXT4-fs (sdc): group descriptors corrupted! Please help me fix this. I never in my wildest nightmares thought a complete mirror would die this badly. Am I missing something? Suggestions on fixing this? Could someone explain why it would resync after the powerout, only to seemingly nuke the drive? Thanks for reading. Any help much appreciated. I've tried everything I can think of, including booting and filesystem checking with SystemRescue and Ubuntu liveboot discs.

    Read the article

  • conflict in debian packages

    - by Alaa Alomari
    I have Debian 4 server (i know it is very old) cat /etc/issue Debian GNU/Linux 4.0 \n \l I have the following in /etc/apt/sources.list deb http://debian.uchicago.edu/debian/ stable main deb http://ftp.debian.org/debian/ stable main deb-src http://ftp.debian.org/debian/ stable main deb http://security.debian.org/ stable/updates main apt-get upgrade Reading package lists... Done Building dependency tree... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies. libt1-5: Depends: libc6 (= 2.7) but 2.3.6.ds1-13etch10+b1 is installed locales: Depends: glibc-2.11-1 but it is not installable E: Unmet dependencies. Try using -f. Now it shows that i have Debian 6!! cat /etc/issue Debian GNU/Linux 6.0 \n \l EDIT I have tried apt-get update Get: 1 http://debian.uchicago.edu stable Release.gpg [1672B] Hit http://debian.uchicago.edu stable Release Ign http://debian.uchicago.edu stable/main Packages/DiffIndex Hit http://debian.uchicago.edu stable/main Packages Get: 2 http://security.debian.org stable/updates Release.gpg [836B] Hit http://security.debian.org stable/updates Release Get: 3 http://ftp.debian.org stable Release.gpg [1672B] Ign http://security.debian.org stable/updates/main Packages/DiffIndex Hit http://security.debian.org stable/updates/main Packages Hit http://ftp.debian.org stable Release Ign http://ftp.debian.org stable/main Packages/DiffIndex Ign http://ftp.debian.org stable/main Sources/DiffIndex Hit http://ftp.debian.org stable/main Packages Hit http://ftp.debian.org stable/main Sources Fetched 3B in 0s (3B/s) Reading package lists... Done apt-get dist-upgrade Reading package lists... Done Building dependency tree... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies. libt1-5: Depends: libc6 (= 2.7) but 2.3.6.ds1-13etch10+b1 is installed locales: Depends: glibc-2.11-1 E: Unmet dependencies. Try using -f. apt-get -f install Reading package lists... Done Building dependency tree... Done Correcting dependencies...Done The following extra packages will be installed: gcc-4.4-base libbsd-dev libbsd0 libc-bin libc-dev-bin libc6 Suggested packages: glibc-doc Recommended packages: libc6-i686 The following packages will be REMOVED libc6-dev libedit-dev libexpat1-dev libgcrypt11-dev libjpeg62-dev libmcal0-dev libmhash-dev libncurses5-dev libpam0g-dev libsablot0-dev libtool libttf-dev The following NEW packages will be installed gcc-4.4-base libbsd-dev libbsd0 libc-bin libc-dev-bin The following packages will be upgraded: libc6 1 upgraded, 5 newly installed, 12 to remove and 349 not upgraded. 7 not fully installed or removed. Need to get 0B/5050kB of archives. After unpacking 23.1MB disk space will be freed. Do you want to continue [Y/n]? y Preconfiguring packages ... dpkg: regarding .../libc-bin_2.11.3-2_i386.deb containing libc-bin: package uses Breaks; not supported in this dpkg dpkg: error processing /var/cache/apt/archives/libc-bin_2.11.3-2_i386.deb (--unpack): unsupported dependency problem - not installing libc-bin Errors were encountered while processing: /var/cache/apt/archives/libc-bin_2.11.3-2_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Now: it seems there is a conflict!! how can i fix it? and is it true that the server has became debian 6!!?? Thanks for your help

    Read the article

  • Logitech USB headphones detected and selected in Debian Squeeze but sound still coming from speakers

    - by mattalexx
    I have a pair of Logitech wireless USB headphones that work with Ubuntu Natty but aren't working in Debian Squeeze. When they are selected as the default audio output, the sound comes out of the speakers instead of the headphones. I have rebooted and tried using a different USB port. My computer is a Thinkpad T510. How can I fix this problem? Here is lsusb: Bus 002 Device 005: ID 046d:0a29 Logitech, Inc. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Here is cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xf2420000 irq 17 1 [Headset ]: USB-Audio - Logitech Wireless Headset Logitech Logitech Wireless Headset at usb-0000:00:1d.0-1.1, full speed 2 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xcdefc000 irq 17 Here is the gnome-volume-control GUI: Here's lsmod | grep usb: snd_usb_audio 50670 0 snd_usb_lib 11192 1 snd_usb_audio usbhid 28008 0 hid 50909 1 usbhid snd_rawmidi 12513 2 snd_usb_lib,snd_seq_midi snd_hwdep 4054 2 snd_usb_audio,snd_hda_codec snd_pcm 47226 3 snd_usb_audio,snd_hda_intel,snd_hda_codec usbcore 98969 5 snd_usb_audio,snd_usb_lib,usbhid,ehci_hcd snd 34423 11 snd_usb_audio,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device nls_base 4541 1 usbcore Here's cat /etc/modprobe.d/alsa-base.conf: # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd-ioctl32 ; /sbin/modprobe --quiet snd-seq ; } install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modprobe --quiet snd-seq-midi ; : ; } install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && { /sbin/modprobe --quiet snd-emu10k1-synth ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 # Keep snd-pcsp from beeing loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 EDIT In VLC, I reset VLC prefs (Output: Default) and sound still comes out of speakers as expected. Then I change it to "Output: ALSA Audio output" and a Device menu appears. I select the headphones. When I then save the prefs, the audio switch to the headphones! But here's what's weird: I go back to prefs, change it to "Output: Default" and the headphones keep working. Maybe the ALSA option is actually what is being chosen as the "Default" option, but the Device menu (whose selection is still being used) is still set to the headphones. Anyway, now I need to figure out how to make it work as the default for the whole system.

    Read the article

  • DRBD not syncing between my nodes when IP is reset

    - by ramdaz
    I am trying to setup DRBD by following the article at http://www.howtoforge.com/setting-up-network-raid1-with-drbd-on-ubuntu-11.10-p2 I am using Ubuntu 10.04 DRBD - 8.3.11 In the first run I had everything working perfectly and when shifting the systems to a production environment I decided to restart the Meta Data creation part and start from scratch. The IPs had changed entirely in the production environment. Issuing drdbadm create-md r0 in both the servers runs successfully. But when I do "drbdadm -- --overwrite-data-of-peer primary all" on the primary it fails to start the re sync. My config file is as given below resource r0 { protocol C; syncer { rate 50M; } startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "aklsadkjlhdbskjndsf8738734jkfkjfkjf"; } on primaryds { device /dev/drbd0; disk /dev/md2; address 172.16.7.1:7788; meta-disk internal; } on secondaryds { device /dev/drbd0; disk /dev/md2; address 172.16.7.3:7788; meta-disk internal; } } Status on primary root at primaryds:~# cat /proc/drbd version: 8.3.7 (api:88/proto:86-91) GIT-hash: ea9e28dbff98e331a62bcbcc63a6135808fe2917 build by root at primaryds, 2012-05-12 15:08:01 0: cs:WFBitMapS ro:Primary/Secondary ds:UpToDate/Inconsistent C r---- ns:0 nr:0 dw:0 dr:200 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5690352828 Status on secondary root at secondaryds:/etc/drbd.d# cat /proc/drbd version: 8.3.7 (api:88/proto:86-91) GIT-hash: ea9e28dbff98e331a62bcbcc63a6135808fe2917 build by root at secondaryds, 2012-05-12 15:25:25 0: cs:WFBitMapT ro:Secondary/Primary ds:Inconsistent/UpToDate C r---- ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5690352828 Log of Primary May 30 13:42:23 primaryds kernel: [ 1584.057076] block drbd0: role( Secondary -> Primary ) disk( Inconsistent -> UpToDate ) May 30 13:42:23 primaryds kernel: [ 1584.086264] block drbd0: Forced to consider local data as UpToDate! May 30 13:42:23 primaryds kernel: [ 1584.086303] block drbd0: Creating new current UUID May 30 13:42:26 primaryds kernel: [ 1586.405551] block drbd0: drbd_sync_handshake: May 30 13:42:26 primaryds kernel: [ 1586.405564] block drbd0: self E8A075F378173D4B:0000000000000004:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:26 primaryds kernel: [ 1586.405574] block drbd0: peer 0000000000000004:0000000000000000:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:26 primaryds kernel: [ 1586.405582] block drbd0: uuid_compare()=2 by rule 30 May 30 13:42:26 primaryds kernel: [ 1586.405587] block drbd0: Becoming sync source due to disk states. May 30 13:42:26 primaryds kernel: [ 1586.405592] block drbd0: Writing the whole bitmap, full sync required after drbd_sync_handshake. May 30 13:42:27 primaryds kernel: [ 1588.171638] block drbd0: 5427 GB (1422588207 bits) marked out-of-sync by on disk bit-map. May 30 13:42:27 primaryds kernel: [ 1588.172769] block drbd0: conn( Connected -> WFBitMapS ) Log in Secondary May 30 13:42:24 secondaryds kernel: [ 1563.304894] block drbd0: peer( Secondary - Primary ) pdsk( Inconsistent - UpToDate ) May 30 13:42:24 secondaryds kernel: [ 1563.339674] block drbd0: drbd_sync_handshake: May 30 13:42:24 secondaryds kernel: [ 1563.339685] block drbd0: self 0000000000000004:0000000000000000:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:24 secondaryds kernel: [ 1563.339695] block drbd0: peer E8A075F378173D4B:0000000000000004:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:24 secondaryds kernel: [ 1563.339703] block drbd0: uuid_compare()=-2 by rule 20 May 30 13:42:24 secondaryds kernel: [ 1563.339709] block drbd0: Becoming sync target due to disk states. May 30 13:42:24 secondaryds kernel: [ 1563.339714] block drbd0: Writing the whole bitmap, full sync required after drbd_sync_handshake. May 30 13:42:26 secondaryds kernel: [ 1565.652342] block drbd0: 5427 GB (1422588207 bits) marked out-of-sync by on disk bit-map. May 30 13:42:26 secondaryds kernel: [ 1565.652965] block drbd0: conn( Connected - WFBitMapT ) The serves are not responding once it reaches this stage. Tried redoing it couple of time but noting happens. Why could the resync not be taking place? I would like some advice? Directions?

    Read the article

  • /usr/bin/sshd isn't linked against PAM on one of my systems. What is wrong and how can I fix it?

    - by marc.riera
    Hi, I'm using AD as my user account server with ldap. Most of the servers run with UsePam yes except this one, it has lack of pam support on sshd. root@linserv9:~# ldd /usr/sbin/sshd linux-vdso.so.1 => (0x00007fff621fe000) libutil.so.1 => /lib/libutil.so.1 (0x00007fd759d0b000) libz.so.1 => /usr/lib/libz.so.1 (0x00007fd759af4000) libnsl.so.1 => /lib/libnsl.so.1 (0x00007fd7598db000) libcrypto.so.0.9.8 => /usr/lib/libcrypto.so.0.9.8 (0x00007fd75955b000) libcrypt.so.1 => /lib/libcrypt.so.1 (0x00007fd759323000) libc.so.6 => /lib/libc.so.6 (0x00007fd758fc1000) libdl.so.2 => /lib/libdl.so.2 (0x00007fd758dbd000) /lib64/ld-linux-x86-64.so.2 (0x00007fd759f0e000) I have this packages installed root@linserv9:~# dpkg -l|grep -E 'pam|ssh' ii denyhosts 2.6-2.1 an utility to help sys admins thwart ssh hac ii libpam-modules 0.99.7.1-5ubuntu6.1 Pluggable Authentication Modules for PAM ii libpam-runtime 0.99.7.1-5ubuntu6.1 Runtime support for the PAM library ii libpam-ssh 1.91.0-9.2 enable SSO behavior for ssh and pam ii libpam0g 0.99.7.1-5ubuntu6.1 Pluggable Authentication Modules library ii libpam0g-dev 0.99.7.1-5ubuntu6.1 Development files for PAM ii openssh-blacklist 0.1-1ubuntu0.8.04.1 list of blacklisted OpenSSH RSA and DSA keys ii openssh-client 1:4.7p1-8ubuntu1.2 secure shell client, an rlogin/rsh/rcp repla ii openssh-server 1:4.7p1-8ubuntu1.2 secure shell server, an rshd replacement ii quest-openssh 5.2p1_q13-1 Secure shell root@linserv9:~# What I'm doing wrong? thanks. Edit: root@linserv9:~# cat /etc/pam.d/sshd # PAM configuration for the Secure Shell service # Read environment variables from /etc/environment and # /etc/security/pam_env.conf. auth required pam_env.so # [1] # In Debian 4.0 (etch), locale-related environment variables were moved to # /etc/default/locale, so read that as well. auth required pam_env.so envfile=/etc/default/locale # Standard Un*x authentication. @include common-auth # Disallow non-root logins when /etc/nologin exists. account required pam_nologin.so # Uncomment and edit /etc/security/access.conf if you need to set complex # access limits that are hard to express in sshd_config. # account required pam_access.so # Standard Un*x authorization. @include common-account # Standard Un*x session setup and teardown. @include common-session # Print the message of the day upon successful login. session optional pam_motd.so # [1] # Print the status of the user's mailbox upon successful login. session optional pam_mail.so standard noenv # [1] # Set up user limits from /etc/security/limits.conf. session required pam_limits.so # Set up SELinux capabilities (need modified pam) # session required pam_selinux.so multiple # Standard Un*x password updating. @include common-password Edit2: UsePAM yes fails With this configuration ssh fails to start : root@linserv9:/home/admmarc# cat /etc/ssh/sshd_config |grep -vE "^[ \t]*$|^#" Port 22 Protocol 2 ListenAddress 0.0.0.0 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys ChallengeResponseAuthentication yes UsePAM yes Subsystem sftp /usr/lib/sftp-server root@linserv9:/home/admmarc# The error it gives is as follows root@linserv9:/home/admmarc# /etc/init.d/ssh start * Starting OpenBSD Secure Shell server sshd /etc/ssh/sshd_config: line 75: Bad configuration option: UsePAM /etc/ssh/sshd_config: terminating, 1 bad configuration options ...fail! root@linserv9:/home/admmarc#

    Read the article

  • Windows Azure : Storage Client Exception Unhandled

    - by veda
    I am writing a code for upload large files into the blobs using blocks... When I tested it, it gave me an StorageClientException It stated: One of the request inputs is out of range. I got this exception in this line of the code: blob.PutBlock(block, ms, null); Here is my code: protected void ButUploadBlocks_click(object sender, EventArgs e) { // store upladed file as a blob storage if (uplFileUpload.HasFile) { name = uplFileUpload.FileName; byte[] byteArray = uplFileUpload.FileBytes; Int64 contentLength = byteArray.Length; int numBytesPerBlock = 250 *1024; // 250KB per block int blocksCount = (int)Math.Ceiling((double)contentLength / numBytesPerBlock); // number of blocks MemoryStream ms ; List<string>BlockIds = new List<string>(); string block; int offset = 0; // get refernce to the cloud blob container CloudBlobContainer blobContainer = cloudBlobClient.GetContainerReference("documents"); // set the name for the uploading files string UploadDocName = name; // get the blob reference and set the metadata properties CloudBlockBlob blob = blobContainer.GetBlockBlobReference(UploadDocName); blob.Properties.ContentType = uplFileUpload.PostedFile.ContentType; for (int i = 0; i < blocksCount; i++, offset = offset + numBytesPerBlock) { block = Convert.ToBase64String(BitConverter.GetBytes(i)); ms = new MemoryStream(); ms.Write(byteArray, offset, numBytesPerBlock); blob.PutBlock(block, ms, null); BlockIds.Add(block); } blob.PutBlockList(BlockIds); blob.Metadata["FILETYPE"] = "text"; } } Can anyone tell me how to solve it...

    Read the article

  • C# rounding DateTime objects

    - by grenade
    I want to round dates/times to the nearest interval for a charting application. I'd like an extension method signature like follows so that the rounding can be acheived for any level of accuracy: static DateTime Round(this DateTime date, TimeSpan span); The idea is that if I pass in a timespan of ten minutes, it will round to the nearest ten minute interval. I can't get my head around the implementation and am hoping one of you will have written or used something similar before. I think either a floor, ceiling or nearest implementation is fine. Any ideas? Edit: Thanks to @tvanfosson & @ShuggyCoUk, the implementation looks like this: public static class DateExtensions { public static DateTime Round(this DateTime date, TimeSpan span) { long ticks = (date.Ticks / span.Ticks) + (span.Ticks / 2) + 1; return new DateTime(ticks * span.Ticks); } public static DateTime Floor(this DateTime date, TimeSpan span) { long ticks = (date.Ticks / span.Ticks); return new DateTime(ticks * span.Ticks); } public static DateTime Ceil(this DateTime date, TimeSpan span) { long ticks = (date.Ticks + span.Ticks - 1) / span.Ticks; return new DateTime(ticks * span.Ticks); } } And is called like so: DateTime nearestHour = DateTime.Now.Round(new TimeSpan(1,0,0)); DateTime minuteCeiling = DateTime.Now.Ceil(new TimeSpan(0,1,0)); DateTime weekFloor = DateTime.Now.Floor(new TimeSpan(7,0,0,0)); ... Cheers!

    Read the article

  • MVC 2.0 - JqGrid Sorting with Mulitple Tables

    - by Billy Logan
    I am in the process of implementing the jqGrid and would like to be able to use the sorting functionality. I have run into some issues with sorting columns that are related to the base table. Here is the script to load the grid: public JsonResult GetData(GridSettings grid) { try { using (IWE dataContext = new IWE()) { var query = dataContext.LKTYPE.Include("VWEPICORCATEGORY").AsQueryable(); ////sorting query = query.OrderBy<LKTYPE>(grid.SortColumn, grid.SortOrder); //count var count = query.Count(); //paging var data = query.Skip((grid.PageIndex - 1) * grid.PageSize).Take(grid.PageSize).ToArray(); //converting in grid format var result = new { total = (int)Math.Ceiling((double)count / grid.PageSize), page = grid.PageIndex, records = count, rows = (from host in data select new { TYPE_ID = host.TYPE_ID, TYPE = host.TYPE, CR_ACTIVE = host.CR_ACTIVE, description = host.VWEPICORCATEGORY.description }).ToArray() }; return Json(result, JsonRequestBehavior.AllowGet); } } catch (Exception ex) { //send the error email ExceptionPolicy.HandleException(ex, "Exception Policy"); } //have to return something if there is an issue return Json(""); } As you can see the description field is a part of the related table("VWEPICORCATEGORY") and the order by is targeted at LKTYPE. I am trying to figure out how exactly one goes about sorting that particular field or maybe even a better way to implement this grid using multiple tables and it's sorting functionality. Thanks in advance, Billy

    Read the article

  • How to find Part Time development/IT work?

    - by Jonathan
    I've been working in the IT field now for 10 years. Originally trained as an Engineer, started out with C++ and have been a .Net specialist since beta. Currently seconded to a major city and working in the finance industry as freelance, I really feel like i've hit the glass ceiling. Have been contracting now for 5 years as the company politics and frustration of not being promoted and poor pay rises for excellent work but during the last decade of corporate cost cutting took its toll on my morale. Freelance made all the difference and i've had a very decorated career for good clients. What any Engineering student could ever dream of when starting out. The problem is, it doesn't particularly make me happy. It's good work, and i enjoy the problem solving aspects of it and having something to do each day. However there is always a large overhead of non-technical work and dealing with poor managers etc. I guess the Engineering was always a bit of a mistake i made the best out of, and now having 10 years behind a computer hasn't done wonders for my health or eye sight. In a nutshell i am in the process of retraining as a therapist and would like to open my own clinic. However, never having done this before, the fast pace IT skills outdate and the fact that all my experience and skills are non transferrable, i am a little worried. Any ideas how i can find part time IT work as i build up my business? (it's incredibly hard to find freelancing work that doesn't require long hours and overtime). Or other ideas to make the transition easier, and perhaps backout if it financially doesn't work/or i have enough marketing skills? I'd be interested to hear from people who have made a similar transition, successfully or unsuccessfully. Many thanks

    Read the article

  • Do you use Styrofoam balls to model your systems?

    - by Nick D
    [Objective-C] Do you still use Styrofoam balls to model your systems, where each ball represents a class? Tom Love: We do, actually. We've also done a 3D animation version of it, which we found to be nowhere near as useful as the Styrofoam balls. There's something about a physical, conspicuous structure hanging from the ceiling right in the middle of a development project that's regularly updated to provide not only the structure of the system that you're building, but also the current status of each one of the classes. We've done it on 19 projects the last time I've counted. One of them was 1,856 classes, which is big - actually, probably bigger than it should be. It was a big commercial project, so it needed to be somewhat big. Masterminds of Programming It is the first time I've read or heard about using styrofoam balls to model classes. Is that a commonly used technique? And, how does that sort of modeling help us to design better the system? If you have any photos to share which can show us how the classes are represented it'd be great!

    Read the article

  • incremental way of counting quantiles for large set of data

    - by Gacek
    I need to count the quantiles for a large set of data. Let's assume we can get the data only through some portions (i.e. one row of a large matrix). To count the Q3 quantile one need to get all the portions of the data and store it somewhere, then sort it and count the quantile: List<double> allData = new List<double>(); foreach(var row in matrix) // this is only example. In fact the portions of data are not rows of some matrix { allData.AddRange(row); } allData.Sort(); double p = 0.75*allData.Count; int idQ3 = (int)Math.Ceiling(p) - 1; double Q3 = allData[idQ3]; Now, I would like to find a way of counting this without storing the data in some separate variable. The best solution would be to count some parameters od mid-results for first row and then adjust it step by step for next rows. Note: These datasets are really big (ca 5000 elements in each row) The Q3 can be estimated, it doesn't have to be an exact value. I call the portions of data "rows", but they can have different leghts! Usually it varies not so much (+/- few hundred samples) but it varies! This question is similar to this one: http://stackoverflow.com/questions/1058813/on-line-iterator-algorithms-for-estimating-statistical-median-mode-skewness But I need to count quantiles. ALso there are few articles in this topic, i.e.: http://web.cs.wpi.edu/~hofri/medsel.pdf http://portal.acm.org/citation.cfm?id=347195&dl But before I would try to implement these, I wanted to ask you if there are maybe any other, qucker ways of counting the 0.25/0.75 quantiles?

    Read the article

  • Split node list to parts.

    - by Kalinin
    xml: <mode>1</mode> <mode>2</mode> <mode>3</mode> <mode>4</mode> <mode>5</mode> <mode>6</mode> <mode>7</mode> <mode>8</mode> <mode>9</mode> <mode>10</mode> <mode>11</mode> <mode>12</mode> i need to separate it on parts (for ex. on 4): xslt: <xsl:variable name="vNodes" select="mode"/> <xsl:variable name="vNumParts" select="4"/> <xsl:variable name="vNumCols" select="ceiling(count($vNodes) div $vNumParts)"/> <xsl:for-each select="$vNodes[position() mod $vNumCols = 1]"> <xsl:variable name="vCurPos" select="(position()-1)*$vNumCols +1"/> <ul> <xsl:for-each select="$vNodes[position() >= $vCurPos and not(position() > $vCurPos + $vNumCols -1)]"> <li><xsl:value-of select="."/></li> </xsl:for-each> </ul> </xsl:for-each> this code is written by Dimitre Novatchev - great coder)) but for the number of nodes less then number of parts (for ex. i have 2 modes) this code does not work - it outputs nothing. How it upgrade for that case (without choose construction)?

    Read the article

  • PHP Object Creation and Memory Usage

    - by JohnO
    A basic dummy class: class foo { var $bar = 0; function foo() {} function boo() {} } echo memory_get_usage(); echo "\n"; $foo = new foo(); echo memory_get_usage(); echo "\n"; unset($foo); echo memory_get_usage(); echo "\n"; $foo = null; echo memory_get_usage(); echo "\n"; Outputs: $ php test.php 353672 353792 353792 353792 Now, I know that PHP docs say that memory won't be freed until it is needed (hitting the ceiling). However, I wrote this up as a small test, because I've got a much longer task, using a much bigger object, with many instances of that object. And the memory just climbs, eventually running out and stopping execution. Even though these large objects do take up memory, since I destroy them after I'm done with each one (serially), it should not run out of memory (unless a single object exhausts the entire space for memory, which is not the case). Thoughts?

    Read the article

  • Paging using Linq-To-Sql based on two parameters in asp.net mvc...

    - by Pandiya Chendur
    As two parameters i say currentPage and pagesize .....I thus far used sql server stored procedures and implemented paging like this, GO ALTER PROCEDURE [dbo].[GetMaterialsInView] -- Add the parameters for the stored procedure here @CurrentPage INT, @PageSize INT AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; SELECT *,ROW_NUMBER() OVER (ORDER BY Id) AS Row FROM ( SELECT *,ROW_NUMBER() OVER (ORDER BY Id) AS Row FROM InTimePagingView ) AS InTimePages WHERE Row >= (@CurrentPage - 1) * @PageSize + 1 AND Row <= @CurrentPage*@PageSize SELECT COUNT(*) as TotalCount FROM InTimePagingView SELECT CEILING(COUNT(*) / CAST(@PageSize AS FLOAT)) NumberOfPages FROM InTimePagingView END Now i am using Linq-to-sql and i use this, public IQueryable<MaterialsObj> FindAllMaterials() { var materials = from m in db.Materials join Mt in db.MeasurementTypes on m.MeasurementTypeId equals Mt.Id where m.Is_Deleted == 0 select new MaterialsObj() { Id = Convert.ToInt64(m.Mat_id), Mat_Name = m.Mat_Name, Mes_Name = Mt.Name, }; return materials; } Now i want to return the records,TotalCount where i use Total count to generate pagenumbers..... Is this possible... Any suggestion... EDIT: Just found this... NorthWindDataContext db = new NorthWindDataContext(); var query = from c in db.Customers select c.CompanyName; //Assuming Page Number = 2, Page Size = 10 int iPageNum = 2; int iPageSize = 10; var PagedData = query.Skip((iPageNum - 1) * iPageSize).Take(iPageSize); ObjectDumper.Write(PagedData);

    Read the article

  • Centering Divisions Around Zero

    - by Mark
    I'm trying to create something that sort of resembles a histogram. I'm trying to create buckets from an array. Suppose I have a random array doubles between -10 and 10; this is very simplified. I then want to specify a center point, in this case 0 and the number of buckets. If I want 4 buckets the division would be -10 to -5, -5 to 0, 0 to 5 and 5 to 10. Not that complicated right. Now if I change the min and max to -12 and -9 and as for 4 divisions its more complicated. I either want a division at -3 and 3; it is centered around 0 ; or one at -6 to 0 and 0 to 6. Its not that hard to find the division size = Math.Ceiling((Abs(Max) + Abs(Min)) / Divisions) Then you would basically have an if statement to determine whether you want it centered on 0 or on an edge. You then iterate out from either 0 or DivisionSize/2 depending on the situation. You may not ALWAYS end up with the specified number of divisions but it will be close. Then you iterate through the array and increment the bin count. Does this seem like a good way to go about this? This method would surely work but it does not seem to be the most elegant. I'm curious as to whether the creation of the bins and the counting from the list could be done in a clever class with linq in a more elegant way? Something like creating the bins and then having each bin be a property {get;} that returns list.Count(x=> x >= Lower && x < Upper).

    Read the article

  • How to make paging start from 1 instead of 0 in ASP.NET MVC

    - by ssx
    I used the paging example of the Nerddinner tutorial. But I also wanted to add page Numbers, somehting like that: <<< 1 2 3 4 5 6 The code below works if i start my paging from 0, but not from 1. How can I fix this ? Here is my code: PaginatedList.cs public class PaginatedList<T> : List<T> { public int PageIndex { get; private set; } public int PageSize { get; private set; } public int TotalCount { get; private set; } public int TotalPages { get; private set; } public PaginatedList(IQueryable<T> source, int pageIndex, int pageSize) { PageIndex = pageIndex; PageSize = pageSize; TotalCount = source.Count(); TotalPages = (int) Math.Ceiling(TotalCount / (double)PageSize); this.AddRange(source.Skip(PageIndex * PageSize).Take(PageSize)); } public bool HasPreviousPage { get { return (PageIndex > 0); } } public bool HasNextPage { get { return (PageIndex+1 < TotalPages); } } } UserController.cs public ActionResult List(int? page) { const int pageSize = 20; IUserRepository userRepository = new UserRepository(); IQueryable<User> listUsers = userRepository.GetAll(); PaginatedList<User> paginatedUsers = new PaginatedList<User>(listUsers, page ?? 0, pageSize); return View(paginatedUsers); } List.cshtml @if (Model.HasPreviousPage) { @Html.RouteLink(" Previous ", "PaginatedUsers", new { page = (Model.PageIndex - 1) }) } @for (int i = 1; i <= Model.TotalPages; i++) { @Html.RouteLink(@i.ToString(), "PaginatedUsers", new { page = (@i ) }) } @if (Model.HasNextPage) { @Html.RouteLink(" Next ", "PaginatedUsers", new { page = (Model.PageIndex + 1) }) }

    Read the article

  • Installing Lubuntu 14.04.1 forcepae fails

    - by Rantanplan
    I tried to install Lubuntu 14.04.1 from a CD. First, I chose Try Lubuntu without installing which gave: ERROR: PAE is disabled on this Pentium M (PAE can potentially be enabled with kernel parameter "forcepae" ... Following the description on https://help.ubuntu.com/community/PAE, I used forcepae and tried Try Lubuntu without installing again. That worked fine. dmesg | grep -i pae showed: [ 0.000000] Kernel command line: file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- forcepae [ 0.008118] PAE forced! On the live-CD session, I tried installing Lubuntu double clicking on the install button on the desktop. Here, the CD starts running but then stops running and nothing happens. Next, I rebooted and tried installing Lubuntu directly from the boot menu screen using forcepae again. After a while, I receive the following error message: The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again. Hitting Enter brings me to the desktop. For what errors should I search? And how? Finally, I rebooted once more and tried Check disc for defects with forcepae option; no errors have been found. Now, I am wondering how to find the error or whether it would be better to follow advice c in https://help.ubuntu.com/community/PAE: "Move the hard disk to a computer on which the processor has PAE capability and PAE flag (that is, almost everything else than a Banias). Install the system as usual but don't add restricted drivers. After the install move the disk back." Thanks for some hints! Perhaps some of the following can help: On Lubuntu 12.04: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.50GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe up bts est tm2 bogomips : 1284.76 clflush size : 64 cache_alignment : 64 address sizes : 32 bits physical, 32 bits virtual power management: uname -a Linux humboldt 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:45:51 UTC 2014 i686 i686 i386 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.5 LTS Release: 12.04 Codename: precise cpuid eax in eax ebx ecx edx 00000000 00000002 756e6547 6c65746e 49656e69 00000001 000006d6 00000816 00000180 afe9f9bf 00000002 02b3b001 000000f0 00000000 2c04307d 80000000 80000004 00000000 00000000 00000000 80000001 00000000 00000000 00000000 00000000 80000002 20202020 20202020 65746e49 2952286c 80000003 6e655020 6d756974 20295228 7270204d 80000004 7365636f 20726f73 30352e31 007a4847 Vendor ID: "GenuineIntel"; CPUID level 2 Intel-specific functions: Version 000006d6: Type 0 - Original OEM Family 6 - Pentium Pro Model 13 - Stepping 6 Reserved 0 Brand index: 22 [not in table] Extended brand string: " Intel(R) Pentium(R) M processor 1.50GHz" CLFLUSH instruction cache line size: 8 Feature flags afe9f9bf: FPU Floating Point Unit VME Virtual 8086 Mode Enhancements DE Debugging Extensions PSE Page Size Extensions TSC Time Stamp Counter MSR Model Specific Registers MCE Machine Check Exception CX8 COMPXCHG8B Instruction SEP Fast System Call MTRR Memory Type Range Registers PGE PTE Global Flag MCA Machine Check Architecture CMOV Conditional Move and Compare Instructions FGPAT Page Attribute Table CLFSH CFLUSH instruction DS Debug store ACPI Thermal Monitor and Clock Ctrl MMX MMX instruction set FXSR Fast FP/MMX Streaming SIMD Extensions save/restore SSE Streaming SIMD Extensions instruction set SSE2 SSE2 extensions SS Self Snoop TM Thermal monitor 31 reserved TLB and cache info: b0: unknown TLB/cache descriptor b3: unknown TLB/cache descriptor 02: Instruction TLB: 4MB pages, 4-way set assoc, 2 entries f0: unknown TLB/cache descriptor 7d: unknown TLB/cache descriptor 30: unknown TLB/cache descriptor 04: Data TLB: 4MB pages, 4-way set assoc, 8 entries 2c: unknown TLB/cache descriptor On Lubuntu 14.04.1 live-CD with forcepae: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.50GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe bts est tm2 bogomips : 1284.68 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 32 bits virtual power management: uname -a Linux lubuntu 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 i686 i686 i686 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty cpuid CPU 0: vendor_id = "GenuineIntel" version information (1/eax): processor type = primary processor (0) family = Intel Pentium Pro/II/III/Celeron/Core/Core 2/Atom, AMD Athlon/Duron, Cyrix M2, VIA C3 (6) model = 0xd (13) stepping id = 0x6 (6) extended family = 0x0 (0) extended model = 0x0 (0) (simple synth) = Intel Pentium M (Dothan B1) / Celeron M (Dothan B1), 90nm miscellaneous (1/ebx): process local APIC physical ID = 0x0 (0) cpu count = 0x0 (0) CLFLUSH line size = 0x8 (8) brand index = 0x16 (22) brand id = 0x16 (22): Intel Pentium M, .13um feature information (1/edx): x87 FPU on chip = true virtual-8086 mode enhancement = true debugging extensions = true page size extensions = true time stamp counter = true RDMSR and WRMSR support = true physical address extensions = false machine check exception = true CMPXCHG8B inst. = true APIC on chip = false SYSENTER and SYSEXIT = true memory type range registers = true PTE global bit = true machine check architecture = true conditional move/compare instruction = true page attribute table = true page size extension = false processor serial number = false CLFLUSH instruction = true debug store = true thermal monitor and clock ctrl = true MMX Technology = true FXSAVE/FXRSTOR = true SSE extensions = true SSE2 extensions = true self snoop = true hyper-threading / multi-core supported = false therm. monitor = true IA64 = false pending break event = true feature information (1/ecx): PNI/SSE3: Prescott New Instructions = false PCLMULDQ instruction = false 64-bit debug store = false MONITOR/MWAIT = false CPL-qualified debug store = false VMX: virtual machine extensions = false SMX: safer mode extensions = false Enhanced Intel SpeedStep Technology = true thermal monitor 2 = true SSSE3 extensions = false context ID: adaptive or shared L1 data = false FMA instruction = false CMPXCHG16B instruction = false xTPR disable = false perfmon and debug = false process context identifiers = false direct cache access = false SSE4.1 extensions = false SSE4.2 extensions = false extended xAPIC support = false MOVBE instruction = false POPCNT instruction = false time stamp counter deadline = false AES instruction = false XSAVE/XSTOR states = false OS-enabled XSAVE/XSTOR = false AVX: advanced vector extensions = false F16C half-precision convert instruction = false RDRAND instruction = false hypervisor guest status = false cache and TLB information (2): 0xb0: instruction TLB: 4K, 4-way, 128 entries 0xb3: data TLB: 4K, 4-way, 128 entries 0x02: instruction TLB: 4M pages, 4-way, 2 entries 0xf0: 64 byte prefetching 0x7d: L2 cache: 2M, 8-way, sectored, 64 byte lines 0x30: L1 cache: 32K, 8-way, 64 byte lines 0x04: data TLB: 4M pages, 4-way, 8 entries 0x2c: L1 data cache: 32K, 8-way, 64 byte lines extended feature flags (0x80000001/edx): SYSCALL and SYSRET instructions = false execution disable = false 1-GB large page support = false RDTSCP = false 64-bit extensions technology available = false Intel feature flags (0x80000001/ecx): LAHF/SAHF supported in 64-bit mode = false LZCNT advanced bit manipulation = false 3DNow! PREFETCH/PREFETCHW instructions = false brand = " Intel(R) Pentium(R) M processor 1.50GHz" (multi-processing synth): none (multi-processing method): Intel leaf 1 (synth) = Intel Pentium M (Dothan B1), 90nm

    Read the article

  • Problems with Update Manager

    - by user65965
    Whenever I try to update with update manager I get the following errors: W:Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise/Release Unable to find expected entry 'commercial/source/Sources' in Release file (Wrong sources.list entry or malformed file) W:Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise-updates/Release Unable to find expected entry 'commercial/source/Sources' in Release file (Wrong sources.list entry or malformed file) W:Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise-backports/Release Unable to find expected entry 'commercial/source/Sources' in Release file (Wrong sources.list entry or malformed file) W:Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise-security/Release Unable to find expected entry 'commercial/source/Sources' in Release file (Wrong sources.list entry or malformed file) W:Failed to fetch http://ppa.launchpad.net/iefremov/ppa/ubuntu/dists/precise/main/source/Sources 404 Not Found W:Failed to fetch http://ppa.launchpad.net/iefremov/ppa/ubuntu/dists/precise/main/binary-amd64/Packages 404 Not Found W:Failed to fetch http://ppa.launchpad.net/iefremov/ppa/ubuntu/dists/precise/main/binary-i386/Packages 404 Not Found E:Some index files failed to download. They have been ignored, or old ones used instead. Any help would be much appreciated, thank you. Thank you very much Eliah. I'm still pretty new to Ubuntu. Here's the output I got from the terminal: No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://archive.ubuntu.com/ubuntu precise main restricted commercial deb-src http://archive.ubuntu.com/ubuntu precise restricted main commercial multiverse universe #Added by software-properties ## Major bug fix updates produced after the final release of the ## distribution. deb http://archive.ubuntu.com/ubuntu precise-updates main restricted commercial deb-src http://archive.ubuntu.com/ubuntu precise-updates restricted main commercial multiverse universe #Added by software-properties ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise universe deb http://archive.ubuntu.com/ubuntu precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://archive.ubuntu.com/ubuntu precise multiverse deb http://archive.ubuntu.com/ubuntu precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise-backports main restricted universe multiverse commercial deb-src http://archive.ubuntu.com/ubuntu precise-backports main restricted universe multiverse commercial #Added by software-properties deb http://archive.ubuntu.com/ubuntu precise-security main restricted commercial deb-src http://archive.ubuntu.com/ubuntu precise-security restricted main commercial multiverse universe #Added by software-properties deb http://archive.ubuntu.com/ubuntu precise-security universe deb http://archive.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu oneiric partner deb-src http://archive.canonical.com/ubuntu precise partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu precise main deb-src http://extras.ubuntu.com/ubuntu precise main ## This is a 3rd party script to install and update Oracle Java deb http://www.duinsoft.nl/pkg debs all ## Sun-Java6-JRE deb http://security.ubuntu.com/ubuntu hardy-security main multiverse ** /etc/apt/sources.list.d/askubuntu-tools-ppa-precise.list: deb http://ppa.launchpad.net/askubuntu-tools/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/askubuntu-tools/ppa/ubuntu precise main ** /etc/apt/sources.list.d/askubuntu-tools-ppa-precise.list.save: deb http://ppa.launchpad.net/askubuntu-tools/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/askubuntu-tools/ppa/ubuntu precise main ** /etc/apt/sources.list.d/effie-jayx-turpial-oneiric.list: deb http://ppa.launchpad.net/effie-jayx/turpial/ubuntu precise main # disabled on upgrade to precise deb-src http://ppa.launchpad.net/effie-jayx/turpial/ubuntu precise main # disabled on upgrade to precise ** /etc/apt/sources.list.d/effie-jayx-turpial-oneiric.list.distUpgrade: deb http://ppa.launchpad.net/effie-jayx/turpial/ubuntu oneiric main deb-src http://ppa.launchpad.net/effie-jayx/turpial/ubuntu oneiric main ** /etc/apt/sources.list.d/effie-jayx-turpial-oneiric.list.save: deb http://ppa.launchpad.net/effie-jayx/turpial/ubuntu precise main # disabled on upgrade to precise deb-src http://ppa.launchpad.net/effie-jayx/turpial/ubuntu precise main # disabled on upgrade to precise ** /etc/apt/sources.list.d/getdeb.list: # deb http://archive.getdeb.net/ubuntu oneiric-getdeb apps # disabled on upgrade to precise ** /etc/apt/sources.list.d/getdeb.list.distUpgrade: deb http://archive.getdeb.net/ubuntu oneiric-getdeb apps ** /etc/apt/sources.list.d/getdeb.list.save: # deb http://archive.getdeb.net/ubuntu oneiric-getdeb apps # disabled on upgrade to precise ** /etc/apt/sources.list.d/hotot-team-ppa-oneiric.list: deb http://ppa.launchpad.net/hotot-team/ppa/ubuntu precise main # disabled on upgrade to precise deb-src http://ppa.launchpad.net/hotot-team/ppa/ubuntu precise main # disabled on upgrade to precise ** /etc/apt/sources.list.d/hotot-team-ppa-oneiric.list.distUpgrade: deb http://ppa.launchpad.net/hotot-team/ppa/ubuntu oneiric main deb-src http://ppa.launchpad.net/hotot-team/ppa/ubuntu oneiric main ** /etc/apt/sources.list.d/hotot-team-ppa-oneiric.list.save: deb http://ppa.launchpad.net/hotot-team/ppa/ubuntu precise main # disabled on upgrade to precise deb-src http://ppa.launchpad.net/hotot-team/ppa/ubuntu precise main # disabled on upgrade to precise ** /etc/apt/sources.list.d/iefremov-ppa-precise.list: deb http://ppa.launchpad.net/iefremov/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/iefremov/ppa/ubuntu precise main ** /etc/apt/sources.list.d/iefremov-ppa-precise.list.save: deb http://ppa.launchpad.net/iefremov/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/iefremov/ppa/ubuntu precise main ** /etc/apt/sources.list.d/jockey.list: deb http://www.openprinting.org/download/printdriver/debian/ lsb3.2 main-nonfree # disabled on upgrade to precise ** /etc/apt/sources.list.d/jockey.list.distUpgrade: deb http://www.openprinting.org/download/printdriver/debian/ lsb3.2 main-nonfree ** /etc/apt/sources.list.d/jockey.list.save: deb http://www.openprinting.org/download/printdriver/debian/ lsb3.2 main-nonfree # disabled on upgrade to precise ** /etc/apt/sources.list.d/plexydesk-plexydesk-dailybuild-precise.list: deb http://ppa.launchpad.net/plexydesk/plexydesk-dailybuild/ubuntu precise main deb-src http://ppa.launchpad.net/plexydesk/plexydesk-dailybuild/ubuntu precise main ** /etc/apt/sources.list.d/plexydesk-plexydesk-dailybuild-precise.list.save: deb http://ppa.launchpad.net/plexydesk/plexydesk-dailybuild/ubuntu precise main deb-src http://ppa.launchpad.net/plexydesk/plexydesk-dailybuild/ubuntu precise main ** /etc/apt/sources.list.d/precise-partner.list: deb http://archive.canonical.com/ubuntu precise partner #Added by software-center ** /etc/apt/sources.list.d/precise-partner.list.save: deb http://archive.canonical.com/ubuntu precise partner #Added by software-center ** /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list: # deb https://justin-dormandy:[email protected]/commercial-ppa-uploaders/crossover-pro/ubuntu precise main #Added by software-center disabled on upgrade to precise ** /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list.distUpgrade: cat: /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list.distUpgrade: Permission denied ** /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list.save: cat: /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list.save: Permission denied ** /etc/apt/sources.list.d/screenlets-ppa-precise.list: deb http://ppa.launchpad.net/screenlets/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/screenlets/ppa/ubuntu precise main ** /etc/apt/sources.list.d/screenlets-ppa-precise.list.save: deb http://ppa.launchpad.net/screenlets/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/screenlets/ppa/ubuntu precise main ** /etc/apt/sources.list.d/webupd8team-java-precise.list: deb http://ppa.launchpad.net/webupd8team/java/ubuntu precise main deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu precise main ** /etc/apt/sources.list.d/webupd8team-java-precise.list.save: deb http://ppa.launchpad.net/webupd8team/java/ubuntu precise main deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu precise main

    Read the article

  • SQL – Migrate Database from SQL Server to NuoDB – A Quick Tutorial

    - by Pinal Dave
    Data is growing exponentially and every organization with growing data is thinking of next big innovation in the world of Big Data. Big data is a indeed a future for every organization at one point of the time. Just like every other next big thing, big data has its own challenges and issues. The biggest challenge associated with the big data is to find the ideal platform which supports the scalability and growth of the data. If you are a regular reader of this blog, you must be familiar with NuoDB. I have been working with NuoDB for a while and their recent release is the best thus far. NuoDB is an elastically scalable SQL database that can run on local host, datacenter and cloud-based resources. A key feature of the product is that it does not require sharding (read more here). Last week, I was able to install NuoDB in less than 90 seconds and have explored their Explorer and Admin sections. You can read about my experiences in these posts: SQL – Step by Step Guide to Download and Install NuoDB – Getting Started with NuoDB SQL – Quick Start with Admin Sections of NuoDB – Manage NuoDB Database SQL – Quick Start with Explorer Sections of NuoDB – Query NuoDB Database Many SQL Authority readers have been following me in my journey to evaluate NuoDB. One of the frequently asked questions I’ve received from you is if there is any way to migrate data from SQL Server to NuoDB. The fact is that there is indeed a way to do so and NuoDB provides a fantastic tool which can help users to do it. NuoDB Migrator is a command line utility that supports the migration of Microsoft SQL Server, MySQL, Oracle, and PostgreSQL schemas and data to NuoDB. The migration to NuoDB is a three-step process: NuoDB Migrator generates a schema for a target NuoDB database It loads data into the target NuoDB database It dumps data from the source database Let’s see how we can migrate our data from SQL Server to NuoDB using a simple three-step approach. But before we do that we will create a sample database in MSSQL and later we will migrate the same database to NuoDB: Setup Step 1: Build a sample data CREATE DATABASE [Test]; CREATE TABLE [Department]( [DepartmentID] [smallint] NOT NULL, [Name] VARCHAR(100) NOT NULL, [GroupName] VARCHAR(100) NOT NULL, [ModifiedDate] [datetime] NOT NULL, CONSTRAINT [PK_Department_DepartmentID] PRIMARY KEY CLUSTERED ( [DepartmentID] ASC ) ) ON [PRIMARY]; INSERT INTO Department SELECT * FROM AdventureWorks2012.HumanResources.Department; Note that I am using the SQL Server AdventureWorks database to build this sample table but you can build this sample table any way you prefer. Setup Step 2: Install Java 64 bit Before you can begin the migration process to NuoDB, make sure you have 64-bit Java installed on your computer. This is due to the fact that the NuoDB Migrator tool is built in Java. You can download 64-bit Java for Windows, Mac OSX, or Linux from the following link: http://java.com/en/download/manual.jsp. One more thing to remember is that you make sure that the path in your environment settings is set to your JAVA_HOME directory or else the tool will not work. Here is how you can do it: Go to My Computer >> Right Click >> Select Properties >> Click on Advanced System Settings >> Click on Environment Variables >> Click on New and enter the following values. Variable Name: JAVA_HOME Variable Value: C:\Program Files\Java\jre7 Make sure you enter your Java installation directory in the Variable Value field. Setup Step 3: Install JDBC driver for SQL Server. There are two JDBC drivers available for SQL Server.  Select the one you prefer to use by following one of the two links below: Microsoft JDBC Driver jTDS JDBC Driver In this example we will be using jTDS JDBC driver. Once you download the driver, move the driver to your NuoDB installation folder. In my case, I have moved the JAR file of the driver into the C:\Program Files\NuoDB\tools\migrator\jar folder as this is my NuoDB installation directory. Now we are all set to start the three-step migration process from SQL Server to NuoDB: Migration Step 1: NuoDB Schema Generation Here is the command I use to generate a schema of my SQL Server Database in NuoDB. First I go to the folder C:\Program Files\NuoDB\tools\migrator\bin and execute the nuodb-migrator.bat file. Note that my database name is ‘test’. Additionally my username and password is also ‘test’. You can see that my SQL Server database is running on my localhost on port 1433. Additionally, the schema of the table is ‘dbo’. nuodb-migrator schema –source.driver=net.sourceforge.jtds.jdbc.Driver –source.url=jdbc:jtds:sqlserver://localhost:1433/ –source.username=test –source.password=test –source.catalog=test –source.schema=dbo –output.path=/tmp/schema.sql The above script will generate a schema of all my SQL Server tables and will put it in the folder C:\tmp\schema.sql . You can open the schema.sql file and execute this file directly in your NuoDB instance. You can follow the link here to see how you can execute the SQL script in NuoDB. Please note that if you have not yet created the schema in the NuoDB database, you should create it before executing this step. Step 2: Generate the Dump File of the Data Once you have recreated your schema in NuoDB from SQL Server, the next step is very easy. Here we create a CSV format dump file, which will contain all the data from all the tables from the SQL Server database. The command to do so is very similar to the above command. Be aware that this step may take a bit of time based on your database size. nuodb-migrator dump –source.driver=net.sourceforge.jtds.jdbc.Driver –source.url=jdbc:jtds:sqlserver://localhost:1433/ –source.username=test –source.password=test –source.catalog=test –source.schema=dbo –output.type=csv –output.path=/tmp/dump.cat Once the above command is successfully executed you can find your CSV file in the C:\tmp\ folder. However, you do not have to do anything manually. The third and final step will take care of completing the migration process. Migration Step 3: Load the Data into NuoDB After building schema and taking a dump of the data, the very next step is essential and crucial. It will take the CSV file and load it into the NuoDB database. nuodb-migrator load –target.url=jdbc:com.nuodb://localhost:48004/mytest –target.schema=dbo –target.username=test –target.password=test –input.path=/tmp/dump.cat Please note that in the above script we are now targeting the NuoDB database, which we have already created with the name of “MyTest”. If the database does not exist, create it manually before executing the above script. I have kept the username and password as “test”, but please make sure that you create a more secure password for your database for security reasons. Voila!  You’re Done That’s it. You are done. It took 3 setup and 3 migration steps to migrate your SQL Server database to NuoDB.  You can now start exploring the database and build excellent, scale-out applications. In this blog post, I have done my best to come up with simple and easy process, which you can follow to migrate your app from SQL Server to NuoDB. Download NuoDB I strongly encourage you to download NuoDB and go through my 3-step migration tutorial from SQL Server to NuoDB. Additionally here are two very important blog post from NuoDB CTO Seth Proctor. He has written excellent blog posts on the concept of the Administrative Domains. NuoDB has this concept of an Administrative Domain, which is a collection of hosts that can run one or multiple databases.  Each database has its own TEs and SMs, but all are managed within the Admin Console for that particular domain. http://www.nuodb.com/techblog/2013/03/11/getting-started-provisioning-a-domain/ http://www.nuodb.com/techblog/2013/03/14/getting-started-running-a-database/ Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

    Read the article

  • OpenCV install problems on Studio 12.04 - broken dependencies

    - by Will
    I'm trying to follow the Ubuntu OpenCV documentation at OpenCV. The provided script has a line which executed for some time, taking away more packages than I expected (such as ubuntu-studio video); sudo apt-get -qq remove ffmpeg x264 libx264-dev When the script gets to the line below, it bombs; sudo apt-get -qq install libopencv-dev build-essential checkinstall cmake pkg-config yasm libtiff4-dev libjpeg-dev libjasper-dev libavcodec-dev libavformat-dev libswscale-dev libdc1394-22-dev libxine-dev libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev libv4l-dev python-dev python-numpy libtbb-dev libqt4-dev libgtk2.0-dev libfaac-dev libmp3lame-dev libopencore-amrnb-dev libopencore-amrwb-dev libtheora-dev libvorbis-dev libxvidcore-dev x264 v4l-utils ffmpeg The error msg is; E: Unable to correct problems, you have held broken packages. I've since run Update-Manager, run sudo apt-get updates, rebooted, tried the above script line manually, and still no change. I've just run sudo apt-get install -f and nothing seemed to change. It did mention that some packages were no longer needed and could be removed by apt-get autoremove, so I ran that. It removed a number of packages, so I reran the install command above. Still same problem of held broken packages. I just ran sudo apt-get -u dist-upgrade Part of the response was; The following packages have been kept back: gstreamer0.10-ffmpeg I'm not sure what that means. I do know that it shows up in my Update-Manager and cannot be checked I then ran sudo dpkg --configure -a and then reran sudo apt-get -f install and the package was still not upgraded, though there was this very interesting comment; Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: gstreamer0.10-ffmpeg : Depends: libavcodec53 (< 5:0) but it is not going to be installed or libavcodec-extra-53 (< 5:0) but 5:0.7.2-1ubuntu1+codecs1~oneiric2 is to be installed E: Unable to correct problems, you have held broken packages. Then I ran sudo apt-get -u dist-upgrade It showed I had one held package, so I ran; sudo apt-get -o Debug::pkgProblemResolver=yes dist-upgrade It also exited without upgrading the package, so I ran; sudo apt-get remove --dry-run gstreamer0.10-ffmpeg:i386 And it gave me; *The following packages will be REMOVED: arista gstreamer0.10-ffmpeg 0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded. Remv arista [0.9.7-3ubuntu1] Remv gstreamer0.10-ffmpeg [0.10.12-1ubuntu1]* But when I reran sudo apt-get -u dist-upgrade It showed the package was still there. *The following packages have been kept back: gstreamer0.10-ffmpeg 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.* Update: Just went into Synaptic PM and completely removed gstreamer0.10-ffmpeg Reran sudo apt-get -u dist-upgrade And was told; 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. However, when I ran the original apt-get to install opencv (first code at the top of this question), it still gave me the same broken package errors. So I tried $ cat /etc/apt/sources.list # # deb cdrom:[Ubuntu-Studio 11.10 _Oneiric Ocelot_ - Release i386 (20111011.1)]/ oneiric main multiverse restricted universe # deb cdrom:[Ubuntu-Studio 11.10 _Oneiric Ocelot_ - Release i386 (20111011.1)]/ oneiric main multiverse restricted universe # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://us.archive.ubuntu.com/ubuntu/ precise main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://us.archive.ubuntu.com/ubuntu/ precise-updates main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://us.archive.ubuntu.com/ubuntu/ precise universe deb-src http://us.archive.ubuntu.com/ubuntu/ precise universe deb http://us.archive.ubuntu.com/ubuntu/ precise-updates universe deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://us.archive.ubuntu.com/ubuntu/ precise multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ precise multiverse deb http://us.archive.ubuntu.com/ubuntu/ precise-updates multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://security.ubuntu.com/ubuntu precise-security main restricted deb-src http://security.ubuntu.com/ubuntu precise-security main restricted deb http://security.ubuntu.com/ubuntu precise-security universe deb-src http://security.ubuntu.com/ubuntu precise-security universe deb http://security.ubuntu.com/ubuntu precise-security multiverse deb-src http://security.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu oneiric partner ## Uncomment the following two lines to add software from Ubuntu's ## 'extras' repository. ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. # deb http://extras.ubuntu.com/ubuntu oneiric main # deb-src http://extras.ubuntu.com/ubuntu oneiric main # deb http://download.opensuse.org/repositories/home:/popinet/xUbuntu_11.04 ./ # disabled on upgrade to precise and then; $ cat /etc/apt/sources.list.d/* But I don't have enough reputation to post the results here (it says I need at least 10 reputation points to post more than 2 links), so I don't know how to provide the requested feedback. Then tried; $ sudo apt-get check [sudo] password for <abcd>: Reading package lists... Done Building dependency tree Reading state information... Done However, no resolution of the problem yet. What else do I need to do? Will an upgrade to Ubuntu Studio 13.xx solve this problem (or compound it)?

    Read the article

  • Static background noise while using new headset Ubuntu 13.04

    - by ThundLayr
    Today I bought a new gaming headset (Gx-Gaming Lychas), and when I tried to record some gameplay-comentary I noticed that there always is a static background noise, I just recorded an example so you guys can listen it (no downloaded needed): http://www47.zippyshare.com/v/65167832/file.html I'm using Kubuntu 13.04 and Kernel version is 3.8.0-19, my laptop is an Acer Travelmate 5760Z, I tried tons of configurations on Alsamixer and none of them made result, I really need to get this working so any kind of help will be very aprecciated. cat /proc/asound/cards: 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xc6400000 irq 44 cat /proc/asound/card0/codec#0 Codec: Conexant CX20588 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x14f1506c Subsystem Id: 0x10250574 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x4a 0x4a] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x80 0x80] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00] Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x50 0x50] [0x80 0x80] [0x80 0x80] [0x80 0x80] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a 0x1b* 0x1d 0x1e Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a* 0x1b 0x1d 0x1e Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Control: name="Headphone Jack", index=0, device=0 Pincap 0x0000001c: OUT HP Detect Pin Default 0x04214040: [Jack] HP Out at Ext Right Conn = 1/8, Color = Green DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1a [Pin Complex] wcaps 0x400481: Stereo Control: name="Internal Mic Phantom Jack", index=0, device=0 Pincap 0x00001324: IN Detect Vref caps: HIZ 50 80 Pin Default 0x90a70130: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x400581: Stereo Control: name="Mic Jack", index=0, device=0 Pincap 0x00011334: IN OUT EAPD Detect Vref caps: HIZ 50 80 EAPD 0x0: Pin Default 0x04a19020: [Jack] Mic at Ext Right Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1c [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1d [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x0: Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1e [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Control: name="Speaker Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11* Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x21 Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11 Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono

    Read the article

  • nginx problem accessing virtual hosts

    - by Sc0rian
    I am setting up nginx as a reverse proxy. The server runs on directadmin and lamp stack. I have nginx running on port 81. I can access all my sites (including virtual ips) on the port 81. However when I forward the traffic from port 80 to 81, the virtual ips have a message saying "Apache is running normally". Server IPs are fine, and I can still access virtual IP's on 81. [root@~]# netstat -an | grep LISTEN | egrep ":80|:81" tcp 0 0 <virtual ip>:81 0.0.0.0:* LISTEN tcp 0 0 <virtual ip>:81 0.0.0.0:* LISTEN tcp 0 0 <serverip>:81 0.0.0.0:* LISTEN tcp 0 0 :::80 :::* LISTEN apache 24090 0.6 1.3 29252 13612 ? S 18:34 0:00 /usr/sbin/httpd -k start -DSSL apache 24092 0.9 2.1 39584 22056 ? S 18:34 0:00 /usr/sbin/httpd -k start -DSSL apache 24096 0.2 1.9 35892 20256 ? S 18:34 0:00 /usr/sbin/httpd -k start -DSSL apache 24120 0.3 1.7 35752 17840 ? S 18:34 0:00 /usr/sbin/httpd -k start -DSSL apache 24495 0.0 1.4 30892 14756 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24496 1.0 2.1 39892 22164 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24516 1.5 3.6 55496 38040 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24519 0.1 1.2 28996 13224 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24521 2.7 4.0 58244 41984 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24522 0.0 1.2 29124 12672 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24524 0.0 1.1 28740 12364 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24535 1.1 1.7 36008 17876 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24536 0.0 1.1 28592 12084 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24537 0.0 1.1 28592 12112 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24539 0.0 0.0 0 0 ? Z 18:35 0:00 [httpd] <defunct> apache 24540 0.0 1.1 28592 11540 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24541 0.0 1.1 28592 11548 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL root 24548 0.0 0.0 4132 752 pts/0 R+ 18:35 0:00 egrep apache|nginx root 28238 0.0 0.0 19576 284 ? Ss May29 0:00 nginx: master process /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf apache 28239 0.0 0.0 19888 804 ? S May29 0:00 nginx: worker process apache 28240 0.0 0.0 19888 548 ? S May29 0:00 nginx: worker process apache 28241 0.0 0.0 19736 484 ? S May29 0:00 nginx: cache manager process here is my nginx conf: cat /usr/local/nginx/conf/nginx.conf user apache apache; worker_processes 2; # Set it according to what your CPU have. 4 Cores = 4 worker_rlimit_nofile 8192; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] ' '"$request" $status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; server_tokens off; access_log /var/log/nginx_access.log main; error_log /var/log/nginx_error.log debug; server_names_hash_bucket_size 64; sendfile on; tcp_nopush on; tcp_nodelay off; keepalive_timeout 30; gzip on; gzip_comp_level 9; gzip_proxied any; proxy_buffering on; proxy_cache_path /usr/local/nginx/proxy_temp levels=1:2 keys_zone=one:15m inactive=7d max_size=1000m; proxy_buffer_size 16k; proxy_buffers 100 8k; proxy_connect_timeout 60; proxy_send_timeout 60; proxy_read_timeout 60; server { listen <server ip>:81 default rcvbuf=8192 sndbuf=16384 backlog=32000; # Real IP here server_name <server host name> _; # "_" is for handle all hosts that are not described by server_name charset off; access_log /var/log/nginx_host_general.access.log main; location / { proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass http://<server ip>; # Real IP here client_max_body_size 16m; client_body_buffer_size 128k; proxy_buffering on; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 120; proxy_buffer_size 16k; proxy_buffers 32 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; } location /nginx_status { stub_status on; access_log off; allow 127.0.0.1; deny all; } } include /usr/local/nginx/vhosts/*.conf; } here is my vhost conf: # cat /usr/local/nginx/vhosts/1.conf server { listen <virt ip>:81 default rcvbuf=8192 sndbuf=16384 backlog=32000; # Real IP here server_name <virt domain name>.com ; # "_" is for handle all hosts that are not described by server_name charset off; access_log /var/log/nginx_host_general.access.log main; location / { proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass http://<virt ip>; # Real IP here client_max_body_size 16m; client_body_buffer_size 128k; proxy_buffering on; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 120; proxy_buffer_size 16k; proxy_buffers 32 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; } }

    Read the article

  • Creating an SMF service for mercurial web server

    - by Chris W Beal
    I'm working on a project at the moment, which has a number of contributers. We're managing the project gate (which is stand alone) with mercurial. We want to have an easy way of seeing the changelog, so we can show management what is going on.  Luckily mercurial provides a basic web server which allows you to see the changes, and drill in to change sets. This can be run as a daemon, but as it was running on our build server, every time it was rebooted, someone needed to remember to start the process again. This is of course a classic usage of SMF. Now I'm not an experienced person at writing SMF services, so it took me 1/2 an hour or so to figure it out the first time. But going forward I should know what I'm doing a bit better. I did reference this doc extensively. Taking a step back, the command to start the mercurial web server is $ hg serve -p <port number> -d So we somehow need to get SMF to run that command for us. In the simplest form, SMF services are really made up of two components. The manifest Usually lives in /var/svc/manifest somewhere Can be imported from any location The method Usually live in /lib/svc/method I simply put the script straight in that directory. Not very repeatable, but it worked Can take an argument of start, stop, or refresh Lets start with the manifest. This looks pretty complex, but all it's doing is describing the service name, the dependencies, the start and stop methods, and some properties. The properties can be by instance, that is to say I could have multiple hg serve processes handling different mercurial projects, on different ports simultaneously Here is the manifest I wrote. I stole extensively from the examples in the Documentation. So my manifest looks like this $ cat hg-serve.xml <?xml version="1.0"?> <!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1"> <service_bundle type='manifest' name='hg-serve'> <service name='application/network/hg-serve' type='service' version='1'> <dependency name='network' grouping='require_all' restart_on='none' type='service'> <service_fmri value='svc:/milestone/network:default' /> </dependency> <exec_method type='method' name='start' exec='/lib/svc/method/hg-serve %m' timeout_seconds='2' /> <exec_method type='method' name='stop' exec=':kill' timeout_seconds='2'> </exec_method> <instance name='project-gate' enabled='true'> <method_context> <method_credential user='root' group='root' /> </method_context> <property_group name='hg-serve' type='application'> <propval name='path' type='astring' value='/src/project-gate'/> <propval name='port' type='astring' value='9998' /> </property_group> </instance> <stability value='Evolving' /> <template> <common_name> <loctext xml:lang='C'>hg-serve</loctext> </common_name> <documentation> <manpage title='hg' section='1' /> </documentation> </template> </service> </service_bundle> So the only things I had to decide on in this are the service name "application/network/hg-serve" the start and stop methods (more of which later) and the properties. This is the information I need to pass to the start method script. In my case the port I want to start the web server on "9998", and the path to the source gate "/src/project-gate". These can be read in to the start method. So now lets look at the method scripts $ cat /lib/svc/method/hg-serve #!/sbin/sh # # # Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved. # # Standard prolog # . /lib/svc/share/smf_include.sh if [ -z $SMF_FMRI ]; then echo "SMF framework variables are not initialized." exit $SMF_EXIT_ERR fi # # Build the command line flags # # Get the port and directory from the SMF properties port=`svcprop -c -p hg-serve/port $SMF_FMRI` dir=`svcprop -c -p hg-serve/path $SMF_FMRI` echo "$1" case "$1" in 'start') cd $dir /usr/bin/hg serve -d -p $port ;; *) echo "Usage: $0 {start|refresh|stop}" exit 1 ;; esac exit $SMF_EXIT_OK This is all pretty self explanatory, we read the port and directory using svcprop, and use those simply to run a command in the start case. We don't need to implement a stop case, as the manifest says to use "exec=':kill'for the stop method. Now all we need to do is import the manifest and start the service, but first verify the manifest # svccfg verify /path/to/hg-serve.xml If that doesn't give an error try importing it # svccfg import /path/to/hg-serve.xml If like me you originally put the hg-serve.xml file in /var/svc/manifest somewhere you'll get an error and told to restart the import service svccfg: Restarting svc:/system/manifest-import The manifest being imported is from a standard location and should be imported with the command : svcadm restart svc:/system/manifest-import # svcadm restart svc:/system/manifest-import and you're nearly done. You can look at the service using svcs -l # svcs -l hg-serve fmri svc:/application/network/hg-serve:project-gate name hg-serve enabled false state disabled next_state none state_time Thu May 31 16:11:47 2012 logfile /var/svc/log/application-network-hg-serve:project-gate.log restarter svc:/system/svc/restarter:default contract_id 15749 manifest /var/svc/manifest/network/hg/hg-serve.xml dependency require_all/none svc:/milestone/network:default (online) And look at the interesting properties # svcprop hg-serve hg-serve/path astring /src/project-gate hg-serve/port astring 9998 ...stuff deleted.... Then simply enable the service and if every things gone right, you can point your browser at http://server:9998 and get a nice graphical log of project activity. # svcadm enable hg-serve # svcs -l hg-serve fmri svc:/application/network/hg-serve:project-gate name hg-serve enabled true state online next_state none state_time Thu May 31 16:18:11 2012 logfile /var/svc/log/application-network-hg-serve:project-gate.log restarter svc:/system/svc/restarter:default contract_id 15858 manifest /var/svc/manifest/network/hg/hg-serve.xml dependency require_all/none svc:/milestone/network:default (online) None of this is rocket science, but a bit fiddly. Hence I thought I'd blog it. It might just be you see this in google and it clicks with you more than one of the many other blogs or how tos about it. Plus I can always refer back to it myself in 3 weeks, when I want to add another project to the server, and I've forgotten how to do it.

    Read the article

  • Hard drive mounted at / , duplicate mounted hard drive after using MountManager

    - by HellHarvest
    possible duplicate post I'm running 12.04 64bit. My system is a dual boot for both Ubuntu and Windows7. Both operating systems are sharing the drive named "Elements". My volume named "Elements" is a 1TB SATA NTFS hard drive that shows up twice in the side bar in nautilus. One of the icons is functional and even has the convenient "eject" icon next to it. Below is a picture of the left menu in Nautilus, with System Monitor-File Systems tab open on top of it. Can someone advise me about how to get rid of this extra icon? I think the problem is much more deep-rooted than just a GUI glitch on Nautilus' part. The other icon does nothing but spit out the following error when I click on it (image below). This only happened AFTER I tried using Mount Manager to automate mounting the drive at start up. I've already uninstalled Mount Manager, and restarted, but the problem didn't go away. The hard drive does mount automatically now, so I guess that's cool. But now, every time I boot up now and open Nautilus, BOTH of these icons appear, one of which is fictitious and useless. According to the image above and the outputs of several other commands, it appears to be mounted at / In which case, no matter where I am in Nautilus when I try to click on that icon, of course it will tell me that that drive is in use by another program... Nautilus. I'm afraid of trying to unmount this hard drive (sdb6) because of where it appears to be mounted. I'm kind of a noob, and I have this gut feeling that tells me trying to unmount a drive at / will destroy my entire file system. This fear was further strengthened by the output of "$ fsck" at the very bottom of this post. Error immediately below when that 2nd "Elements" hard drive is clicked in Nautilus: Unable to mount Elements Mount is denied because the NTFS volume is already exclusively opened. The volume may be already mounted, or another software may use it which could be identified for example by the help of the 'fuser' command. It's odd to me that that error message above claims that it's an NTFS volume when everything else tell me that it's an ext4 volume. The actual hard drive "Elements" is in fact an NTFS volume. Here's the output of a few commands and configuration files that may be of interest: $ fuser -a / /: 2120r 2159rc 2160rc 2172r 2178rc 2180rc 2188r 2191rc 2200rc 2203rc 2205rc 2206r 2211r 2212r 2214r 2220r 2228r 2234rc 2246rc 2249rc 2254rc 2260rc 2261r 2262r 2277rc 2287rc 2291rc 2311rc 2313rc 2332rc 2334rc 2339rc 2343rc 2344rc 2352rc 2372rc 2389rc 2422r 2490r 2496rc 2501rc 2566r 2573rc 2581rc 2589rc 2592r 2603r 2611rc 2613rc 2615rc 2678rc 2927r 2981r 3104rc 4156rc 4196rc 4206rc 4213rc 4240rc 4297rc 5032rc 7609r 7613r 7648r 9593rc 18829r 18833r 19776r $ sudo df -h Filesystem Size Used Avail Use% Mounted on /dev/sdb6 496G 366G 106G 78% / udev 2.0G 4.0K 2.0G 1% /dev tmpfs 791M 1.5M 790M 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.0G 672K 2.0G 1% /run/shm /dev/sda1 932G 312G 620G 34% /media/Elements /home/solderblob/.Private 496G 366G 106G 78% /home/solderblob /dev/sdb2 188G 100G 88G 54% /media/A2B24EACB24E852F /dev/sdb1 100M 25M 76M 25% /media/System Reserved $ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00093cab Device Boot Start End Blocks Id System /dev/sda1 2048 1953519615 976758784 7 HPFS/NTFS/exFAT Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e8d9b Device Boot Start End Blocks Id System /dev/sdb1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sdb2 206848 392378768 196085960+ 7 HPFS/NTFS/exFAT /dev/sdb3 392380414 1465147391 536383489 5 Extended /dev/sdb5 1456762880 1465147391 4192256 82 Linux swap / Solaris /dev/sdb6 392380416 1448374271 527996928 83 Linux /dev/sdb7 1448376320 1456758783 4191232 82 Linux swap / Solaris Partition table entries are not in disk order $ cat /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> UUID=77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e / ext4 defaults 0 1 UUID=F6549CC4549C88CF /media/Elements ntfs-3g users 0 0 $ sudo blkid /dev/sda1: LABEL="Elements" UUID="F6549CC4549C88CF" TYPE="ntfs" /dev/sdb1: LABEL="System Reserved" UUID="5CDE130FDE12E156" TYPE="ntfs" /dev/sdb2: UUID="A2B24EACB24E852F" TYPE="ntfs" /dev/sdb6: UUID="77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e" TYPE="ext4" $ sudo blkid -c /dev/null (appears to be exactly the same as above) /dev/sda1: LABEL="Elements" UUID="F6549CC4549C88CF" TYPE="ntfs" /dev/sdb1: LABEL="System Reserved" UUID="5CDE130FDE12E156" TYPE="ntfs" /dev/sdb2: UUID="A2B24EACB24E852F" TYPE="ntfs" /dev/sdb6: UUID="77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e" TYPE="ext4" $ mount /dev/sdb6 on / type ext4 (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda1 on /media/Elements type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) /home/solderblob/.Private on /home/solderblob type ecryptfs (ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=76a47b0175afa48d,ecryptfs_fnek_sig=391b2d8b155215f7) gvfs-fuse-daemon on /home/solderblob/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=solderblob) /dev/sdb2 on /media/A2B24EACB24E852F type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096) /dev/sdb1 on /media/System Reserved type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096) $ ls -a . A2B24EACB24E852F Ubuntu 12.04.1 LTS amd64 .. Elements System Reserved $ cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,relatime,size=2013000k,nr_inodes=503250,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=809872k,mode=755 0 0 /dev/disk/by-uuid/77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e / ext4 rw,relatime,user_xattr,acl,barrier=1,data=ordered 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0 /dev/sda1 /media/Elements fuseblk rw,nosuid,nodev,noexec,relatime,user_id=0,group_id=0,allow_other,blksize=4096 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime 0 0 /home/solderblob/.Private /home/solderblob ecryptfs rw,relatime,ecryptfs_fnek_sig=391b2d8b155215f7,ecryptfs_sig=76a47b0175afa48d,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs 0 0 gvfs-fuse-daemon /home/solderblob/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0 /dev/sdb2 /media/A2B24EACB24E852F fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 /dev/sdb1 /media/System\040Reserved fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 gvfs-fuse-daemon /root/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=0,group_id=0 0 0 $ fsck fsck from util-linux 2.20.1 e2fsck 1.42 (29-Nov-2011) /dev/sdb6 is mounted. WARNING!!! The filesystem is mounted. If you continue you ***WILL*** cause ***SEVERE*** filesystem damage. Do you really want to continue<n>? no check aborted.

    Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >