Search Results

Search found 16885 results on 676 pages for 'custom headers'.

Page 47/676 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

  • WCF Message Debugging on Custom Binding

    - by Programming Hero
    I've created a custom binding in WCF for a custom MessageEncoder to allow messages to be written as XML using a wider range of encodings than WCF supports out of the box. The encoder appears to be working and I am able to send and receive messages, but I want to verify that the XML message being written is exactly as required by the service I am trying to consume. I've turned on message logging for WCF using the diagnostic trace listeners to output the messages sent and received over the wire to a log file. Unfortunately, for calls using my encoder, the message is displayed as ... stream ... EDIT: I don't think it's anything to do with my custom encoding. I have experimented with my custom binding a little, switching to using the built-in text encoding and http transport. I still don't get a message body logged in the message trace. Is there anything that needs to be specified within a custom binding to enable message logging?

    Read the article

  • PHP File unreadable after being downloaded

    - by Drew
    Hi I have a script that creates a file and stores it on the server. The file is encoded in UTF-8 and is a kind of xml file for the cmap software. If i open the file directly from the server then there is no problem and the file can be read. I am forcing a download of this file when a user goes to a specific url. After such a download, the file is unreadable by the cmap software. I have to go into my text editor (notepad++) and change the encoding from UTF-8 to UTF-8 without BOM. Am I sending the wrong headers? Is php doing something to the file when it is downloading it? Any advice on this would really be appreciated. Cheers Drew

    Read the article

  • Problem with implementing removeAll for List of custom object

    - by Jay
    Hello everyone, I have a scenario in my code where I need to compare two Lists and remove from the first list, objects which are present in the second list. Akin to how the "removeAll" object works for List. Since my List is created on a custom object, the removeAll method won't work for me. I have tried various methods to make this work: - implemented equals() and hashCode for the custom object comprising the list - implemented the Comparable Interface for the custom object - implemented the Comparator Interface for the custom object I've even tried using the Apache Common's CollectionUtils and ListUtils methods (subtract, intersect, removeAll). None seem to work. I understand I will perhaps need to write some custom removal code. But not sure how to go about doing that. Any pointers helping me move in the right direction will be really appreciated. Thanks, Jay

    Read the article

  • Any significance to Google's "expires" date being Fri, 01 Jan 1990 00:00:00 GMT?

    - by Robusto
    I was looking at the response headers for my GMail account and noticed that the date Fri, 01 Jan 1990 00:00:00 GMT shows up as the value for "Expires" over and over again. I suppose this is just an easy constant to make sure the browser understands this is past its freshness date. But is there any significance to that particular date? One might as easily have used the same date in 2000, or 1970, or whatever. It's not quirky enough to be someone's birthday or date of college graduation or anything personal like that. Maybe it's just arbitrary, but I was wondering if someone has a good explanation why that particular date was chosen.

    Read the article

  • [JS] XMLHttpRequest problem

    - by mcco
    I am trying to do "POST" with XMLHttpRequest in a firefox extension, and after that I try to get the "Location" header and open it in a new tab. For some reason, the XMLHttpRequest doesn't contain a location header. My code function web(url,request) { var http = new XMLHttpRequest(); http.open('POST',url,true); http.setRequestHeader('Content-Type','application/x-www-form-urlencoded'); http.onreadystatechange=function() { if(http.readyState == 2) { alert(http.getResponseHeader("Location")); } } http.send(request); } Also, if I change the alert to getAllResponseHeaders() to see all headers, I just don't see the location header there. If I try to spy on the request of the original site with Firebug, it does show me the location header in the response. Please help me resolve my issues. Thanks :) P.S. I'm also unable to open a link in new tab using window.open(url, this.window.title);, but as that's not directly related to the rest of this I'll post a separate question to ask about it.

    Read the article

  • How to declare more than one header on PHP

    - by Homer Simpson
    I want to send my users to different pages based on user action. So I made multiple functions at the top of the page like so: <?php function one() { header("location: pagea.php"); } function two() { header("location: pageb.php"); } function three() { header("location: pagec.php"); } ?> Of course I get an error because I am re declaring headers. At first I though it was going to be okay since I am containing them inside functions and am calling any one function at a time. But still I get the error. Is there any other way of doing this?

    Read the article

  • WPF Custom Control - Designer looks fine, but I get a runtime issue...

    - by myermian
    MainWindow.xaml <Window x:Class="MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:my="clr-namespace:MyStuff;assembly=MyStuff" Title="MainWindow" Height="350" Width="525"> <Grid> <TabControl Margin="5"> <TabItem Header="Start Page" /> <my:XTabItem Header="Tab 1" Image="Resources/icon1.png" /> </TabControl> </Grid> </Window> Generic.xaml <ResourceDictionary xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="clr-namespace:MyStuff" > <!-- XTabItem --> <Style TargetType="{x:Type local:XTabItem}"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type local:XTabItem}"> <Border Background="{TemplateBinding Background}" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}"> <StackPanel Orientation="Horizontal"> <Image Source="{Binding Path=Image, RelativeSource={RelativeSource TemplatedParent}}" Stretch="UniformToFill" MaxHeight="24" /> <TextBlock Text="{TemplateBinding Header}" /> <Button Content="X" /> </StackPanel> </Border> </ControlTemplate> </Setter.Value> </Setter> </Style> </ResourceDictionary> XTabItem.cs using System; using System.ComponentModel; using System.Windows; using System.Windows.Controls; using System.Windows.Media; namespace MyStuff { public class XTabItem : TabItem { #region Dependency Properties public static readonly DependencyProperty ImageProperty; #endregion #region Constructors / Initializer static XTabItem() { //Initialize the control as "lookless". DefaultStyleKeyProperty.OverrideMetadata(typeof(XTabItem), new FrameworkPropertyMetadata(typeof(XTabItem))); //Setup the dependency properties. ImageProperty = DependencyProperty.Register("Image", typeof(ImageSource), typeof(XTabItem), new UIPropertyMetadata(null)); } #endregion #region Custom Control Properties (Image) /// <summary> /// The image (icon) displayed by inside the tab header. /// </summary> /// <remarks>The image is specified in XAML as an absolute or relative path.</remarks> [Description("The image displayed by the button"), Category("Optional Properties")] public ImageSource Image { get { return (ImageSource)GetValue(ImageProperty); } set { SetValue(ImageProperty, value); } } #endregion } } Exception at line #9 () : XamlParseException : 'Provide value on 'System.Windows.Baml2006.TypeConverterMarkupExtension' threw an exception.' Line number '9' and line position '27'.

    Read the article

  • How to create Custom action project with WIX 2.0

    - by Venkat
    Hi, I have installed WIX 2.0 (and Votive). I need to create user defined custom actions using the Custom action project. I found the custom action project template in VS2008 when WIX 3.0 is installed. Now, i couldnt find any template in VS2005 with WIX 2.0. Can anyone plz let me know how can i create a custom action project( class with some custom action)..like this [CustomAction] public static ActionResult InstallItem1(Session session) I think Microsoft.WindowsInstaller and Microsoft.Deployment.WindowsInstaller are the references required (not sure) to create such methods but i couldnt find them in my machine.

    Read the article

  • HTTP Content-type header for cached files

    - by Brian
    Hello, Using Apache with mod_rewrite, when I load a .css or .js file and view the HTTP headers, the Content-type is only set correctly the first time I load it - subsequent refreshes are missing Content-type altogether and it's creating some problems for me. I can get around this by appending a random query string value to the end of each filename, eg. http://www.site.com/script.js?12345 However, I don't want to have to do that, since caching is good and all I want is for the Content-type to be present. I've tried using a RewriteRule to force the type but still didn't solve the problem. Any ideas? Thanks, Brian

    Read the article

  • How do you make a Custom Data Generator for SQL XML DataType.

    - by Keith Sirmons
    Howdy, I am using Visual Studio 2010 and am playing around with the Database Projects. I am creating a DataGenerationPlan to insert data into a simple table, in which one of the column datatypes is XML. Out of the box, the generation plan uses the Regular Expression generator and generates something like this : HGcSv9wa7yM44T9x5oFT4pmBkEmv62lJ7OyAmCnL6yqXC2X.......... I am looking at creating a custom data Generator for this data type and have followed this site for the basics: http://msdn.microsoft.com/en-us/library/aa833244.aspx This example works if I am creating a string datatype and using it for a nvarchar datatype. What do I need to change to hook this Generator to the XML Datatype? Below are my code files. The string property works for nvarchar. The XElement property does not work for the xml datatype, and the RecordXMLDataGenerator is not listed as an option in the Generator column for the generation plan. CustomDataGenerators: using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Data.Schema.Tools.DataGenerator; using Microsoft.Data.Schema.Extensibility; using Microsoft.Data.Schema; using Microsoft.Data.Schema.Sql; using System.Xml.Linq; namespace CustomDataGenerators { [DatabaseSchemaProviderCompatibility(typeof(SqlDatabaseSchemaProvider))] public class RecordXMLDataGenerator : Generator { private XElement _RecordData; [Output(Description = "Generates string of XML Data for the Record.", Name = "RecordDataString")] public string RecordDataString { get { return _RecordData.ToString(SaveOptions.None); } } [Output(Description = "Generates XML Data for the Record.", Name = "RecordData")] public XElement RecordData { get { return _RecordData; } } protected override void OnGenerateNextValues() { base.OnGenerateNextValues(); XElement element = new XElement("Root", new XElement("Children1", 1), new XElement("Children6", 6) ); _RecordData = element; } } } XML Extensions File: <?xml version="1.0" encoding="utf-8" ?> <extensions assembly="" version="1" xmlns="urn:Microsoft.Data.Schema.Extensions" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:Microsoft.Data.Schema.Extensions Microsoft.Data.Schema.Extensions.xsd"> <extension type="CustomDataGenerators.RecordXMLDataGenerator" assembly="CustomDataGenerators, Version=1.0.0.0, Culture=neutral, PublicKeyToken=xxxxxxxxxxxx" enabled="true"/> </extensions> Table.sql: CREATE TABLE [dbo].[Record] ( id int IDENTITY (1,1) NOT NULL, recordData xml NULL, userId int NULL, test nvarchar(max) NULL, rowver rowversion NULL, CONSTRAINT pk_RecordID PRIMARY KEY (id) )

    Read the article

  • Sending the variable's content to my mailbox in Python?

    - by brilliant
    I have asked this question here about a Python command that fetches a URL of a web page and stores it in a variable. The first thing that I wanted to know then was whether or not the variable in this code contains the HTML code of a web-page: from google.appengine.api import urlfetch url = "http://www.google.com/" result = urlfetch.fetch(url) if result.status_code == 200: doSomethingWithResult(result.content) The answer that I received was "yes", i.e. the variable "result" in the code did contain the HTML code of a web page, and the programmer who was answering said that I needed to "check the Content-Type header and verify that it's either text/html or application/xhtml+xml". I've looked through several Python tutorials, but couldn't find anything about headers. So my question is where is this Content-Type header located and how can I check it? Could I send the content of that variable directly to my mailbox? Here is where I got this code. It's on Google App Engines.

    Read the article

  • <thead> and <tfoot> in Safari

    - by AJ
    I trying to print a page with multiple tables. The problem is that any of these tables may break and carry over to the next page. Have been trying to get the table header to repeat on the second page. Am currently using thead and setting the display property to table-header-group. This works just as expected in IE and firefox but the header will not repeat in Safari. Since we are using software that converts our page to a pdf document for printing...and the 3rd party software uses a Safari engine, we are stuck with this problem. Does anyone know a way / workaround to make headers repeat if the table spans multiple pages in Safari?

    Read the article

  • Sinatra not passing header with redirect

    - by emson
    Hi All I have a simple Sinatra proxy, which when an endpoint is called, will redirect to another endpoint on the same Sinatra proxy. When I make a request with a header, the proxy doesn't seem to pass this header through to the second endpoint when the request redirects in the first. This is my code: get '/first' do # get the header from the request username = env['HTTP_USERNAME'] # set the header for the response response['username'] = username redirect '/second' end get '/second' do # This doesn't exist when redirected from /first puts env['HTTP_USERNAME'] # Here is a list of all headers env.each_key do |key| puts "KEY: #{key} VALUE: #{env[key]}" unless key.nil? end "DONE" end Any tips would be greatly appreciated. Thanks

    Read the article

  • Php Mailer problem - messages marked as spam -

    - by Guanche
    A few days ago I upgraded Php Mailer and now some email providers my messages mark as spam. This is what I see in the headers of the marked messages: X-SpamTest-Info: {TO: header missing} This is from my php file. $mail->From = $sender; $mail->FromName = $sender_name; $mail->Subject = $subject; $mail->Body = $body; $mail->AddAddress($recipient,$recipient_name); $mail->AddReplyTo($replyto,"No-Reply"); Dont know how to add "to" header and can't understand how it's possible that "to" is missing but email arrives to the correct "to" address...

    Read the article

  • PHP: How to check for response code?

    - by Tom
    Hi, I'm a relative PHP newbie implementing a PayPal IPN listener and all seems to be working fine, except I dont really know how to check for a response code. I've tried something ugly with cURL but it doesn't work at all (I'm not understanding cURL). I've tried this piece of code that I grabbed from somewhere on the net: $fp = fsockopen('ssl://www.sandbox.paypal.com', 443, $errno, $errstr, 30); $response_headers = get_headers($fp); $response_code = (int)substr($headers[0], 9, 3); ... but it's not working (returns $response_code = 0). So right now, I'm debugging my IPN code without checking for a Response 200. Can anyone more experienced advise me on what's the proper/simple way to check this? Thanks

    Read the article

  • Header files in C++

    - by user269037
    Hi, I am making a simulator and have written lots of files and headers. The problem is whenever I include a file I give the relative path of the particular file. For example a typical code in my application would begin like ifndef AI_H define AI_H include include "../world/world.h" include "pathPlan.h" include "skills/tryskill.h" include "../info/condition.h" include "dataStructures/destination.h" include "../params/gamePlay.h" include "../modules/controlModule.h" class ai { public: etc etc I want to avoid using the relative paths. For example I want to directly include "tryskill.h" and "destination.h" without giving the absolute paths. That way I wont need to bother if I change the location of any particular file. I am using Ubuntu 9.10. Any help would be highly appreciated.

    Read the article

  • How can I avoid explicitly declaring directory paths in C or C++ #include directives?

    - by user269037
    Hi, I am making a simulator and have written lots of files and headers. The problem is whenever I include a file I give the relative path of the particular file. For example a typical code in my application would begin like #ifndef AI_H #define AI_H #include <cstdlib> #include "../world/world.h" #include "pathPlan.h" #include "skills/tryskill.h" #include "../info/condition.h" #include "dataStructures/destination.h" #include "../params/gamePlay.h" #include "../modules/controlModule.h" class ai { public: etc etc I want to avoid using the relative paths. For example I want to directly include "tryskill.h" and "destination.h" without giving the absolute paths. That way I wont need to bother if I change the location of any particular file. I am using Ubuntu 9.10. Any help would be highly appreciated.

    Read the article

  • determine if user is using proxy

    - by jefffan24
    Hi I'm creating a game and I would like to be able to tell if a user is using a proxy. If they are than it basically puts a flag on their account. I can make it do the flag and all but I'm not exactly sure how to tell if a user is using a proxy. I've seen you can use headers but I'm not exactly sure which to look for and how you would check if a user "has" a header (besides the normal http_referrer and what not). Any help is greatly appreciated.

    Read the article

  • Why does php's file_get_contents incorrectly retrieve json files from xkcd?

    - by hally
    In writing a PHP script to download xkcd comics, i incurred errors when trying to get specific comics (as opposed to the latest one). Specifically, pointing file_get_contents at the following url: xkcd.com/$COMIC_NUM/info.0.json inexplicably retrieved the xhtml version of the comic's page on xkcd.com, and not a JSON file. However, if i request the exact same url in my browser, the correct JSON file is downloaded. I'm not sure why this is happening, but i suspect it has something to do with the request headers being sent. Please help! :S

    Read the article

  • cocos2dx - Custom Fragment Shader and CCRenderTexture

    - by saiy2k
    I have a CCRenderTexture that is filled with a sprite when the scene is loaded, as follows, canvas = CCRenderTexture::create(this->getContentSize().width, this->getContentSize().height); canvas->setPosition(data->position); canvas->beginWithClear(0.0, 0.0, 0.0, 0); this->visit(); canvas->end(); The above code is written within a class, which derives from CCSprite (Hence this). Then, in another function applyShader(), I create a sprite named splat, from the texture of CCRenderTexture *canvas. Thus splat will contain the whole texture of canvas. Now I apply a custom fragment shader to the splat by calling the function splat->renderShader(), which will modify some small portion of the whole texture. Then I draw the modified texture back to the CCRenderTexture *canvas. Hence, applyShader() will * take a texture from CCRenderTexture, * create a sprite based on it, * apply a fragment shader to it * and draw the modified texture back to CCRenderTexture. This applyShader() will be called repetitively and its code is as follows: splat = Splat::createWithTexture(art->canvas->getSprite()->getTexture()); splat->renderShader(); art->canvas->begin(); splat->visit(); art->canvas->end(); My shader code is (nothing fancy) precision mediump float; varying vec2 v_texCoord; uniform sampler2D u_texture; uniform sampler2D u_colorRampTexture; uniform float params[5]; void main() { gl_FragColor = texture2D(u_texture, v_texCoord); return; } So, with the above code I expect the original sprite this to get rendered over and over again without any visual changes. But on each call to applyShader(), the texture is getting stretched a little and the stretched image is getting rendered. After some 10 calls, the image gets so distorted. Can someone please tell me where I am going wrong? Thanks :-) PS: All code shown here is partial, not complete code. Edit: Adding Screens Update: The problem has nothing to do with shaders it seems. It happens even when I dont call renderShader(). The actual lines of code is: splat = Splat::createWithTexture(art->canvas->getSprite()->getTexture()); splat->setPosition( ccp( art->getContentSize().width * 0.5, art->getContentSize().height * 0.5 ) ); splat->setFlipY(true); art->canvas->begin(); splat->visit(); art->canvas->end();

    Read the article

  • How to Creat custom content for nginx error 502 page, keep origin url on browser

    - by user123862
    i'm trying to get custom language and message for nginx error page but keep url on browser.. not success for eg: i go to url : xaluan.com/aaa/bbb.html on the time server down.. nginx will show error 502. with the same url but custom message as my language. test 1. I created a custom page at /usr/local/nginx/html/205.html as following config but it show on web site when error is default nginx error at domain.com/50.html ( the content of webpage not same as i created) error_page 502 /502.html; location = /502.html { root /usr/local/nginx/html; } test 2. Then i create same page at my www domain folder /home/xaluano/public_html/502.html but this keep redirect me to root domain.com/502.html the content now same as i created. but.. the url still not as i need error_page 502 /502.html; location = /502.html { root /home/xaluano/public_html; internal; } EDIT UPDATE for more detail 10/06/2012 please download my nginx config http://pastebin.com/7iLD6WQq and vhost config following: http://pastebin.com/ZZ91KiY6 == the case test.. if apache httpd service stop: #service httpd stop then open browser go to: xaluan.com/modules.php?name=News&file=article&sid=123456 I will see the 502 error with the same url on browser address == Custome error page I need the config which help when apache fail .. will show the custom message tell user wail for 1 minute for service back then refress current page with same url ( refresh I can do easy by javascript ), Nginx dosent change url so java-script can work out. any help will be great.. thank in advance

    Read the article

  • How to create custom content for nginx error 502 page, keep origin url on browser

    - by user123862
    i'm trying to get custom language and message for nginx error page but keep url on browser.. not success for eg: i go to url : xaluan.com/aaa/bbb.html on the time server down.. nginx will show error 502. with the same url but custom message as my language. test 1. I created a custom page at /usr/local/nginx/html/205.html as following config but it show on web site when error is default nginx error at domain.com/50.html ( the content of webpage not same as i created) error_page 502 /502.html; location = /502.html { root /usr/local/nginx/html; } test 2. Then i create same page at my www domain folder /home/xaluano/public_html/502.html but this keep redirect me to root domain.com/502.html the content now same as i created. but.. the url still not as i need error_page 502 /502.html; location = /502.html { root /home/xaluano/public_html; internal; } EDIT UPDATE for more detail 10/06/2012 please download my nginx config http://pastebin.com/7iLD6WQq and vhost config following: http://pastebin.com/ZZ91KiY6 == the case test.. if apache httpd service stop: #service httpd stop then open browser go to: xaluan.com/modules.php?name=News&file=article&sid=123456 I will see the 502 error with the same url on browser address == Custome error page I need the config which help when apache fail .. will show the custom message tell user wail for 1 minute for service back then refress current page with same url ( refresh I can do easy by javascript ), Nginx dosent change url so java-script can work out. any help will be great.. thank in advance

    Read the article

  • Help needed in customizing Ubuntu 13 distribution

    - by Bilal Wajid
    I have been using Ubuntu for over 3 years. I want to custom-build-ubuntu-distribution. I am trying to do the needful using Ubuntu 13.04. I have tried the following:- Remastersys - failed. Relinux - failed. Ubuntu Customization Kit - failed. LiveCDCustomizationFromScratch (help.ubuntu.com) - failed. Kindly guide me how to do this, based on the above failed attempts. I think a manual of how to do it would be very very helpful. Thanks and Best Wishes, B. Wajid

    Read the article

  • Upgrading 10.04LTS -> 10.10 using custom sources

    - by Boatzart
    I'm trying to upgrade to 10.10 from 10.04 LTS using a custom sources.list file that points to an unofficial mirror*. The mirror does have maverick, but I get the following output when upgrading: boatzart@somecomputer: > sudo do-release-upgrade Checking for a new ubuntu release Done Upgrade tool signature Done Upgrade tool Done downloading extracting 'maverick.tar.gz' authenticate 'maverick.tar.gz' against 'maverick.tar.gz.gpg' tar: Removing leading `/' from member names Reading cache Checking package manager Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Updating repository information WARNING: Failed to read mirror file No valid mirror found While scanning your repository information no mirror entry for the upgrade was found. This can happen if you run a internal mirror or if the mirror information is out of date. Do you want to rewrite your 'sources.list' file anyway? If you choose 'Yes' here it will update all 'lucid' to 'maverick' entries. If you select 'No' the upgrade will cancel. Continue [yN] y WARNING: Failed to read mirror file 96% [Working] Checking package manager Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Calculating the changes Calculating the changes Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: The package 'update-manager-kde' is marked for removal but it is in the removal blacklist. This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report. Restoring original system state Aborting Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Here is the relevant section from /var/log/dist-upgrade/main.log: 2010-11-18 14:05:52,117 DEBUG The package 'update-manager-kde' is marked for removal but it's in the removal blacklist 2010-11-18 14:05:52,136 ERROR Dist-upgrade failed: 'The package 'update-manager-kde' is marked for removal but it is in the removal blacklist.' 2010-11-18 14:05:52,136 DEBUG abort called *I'm located inside of USC, and for some crazy reason any sustained downloads to anywhere outside of the University are throttled down to 5kbps inside of my lab. Because of this I need to use the following sources.list: deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid main restricted universe multiverse deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid-updates main restricted universe multiverse deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid-backports main restricted universe multiverse deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid-security main restricted universe multiverse I've tried adding four more entries to the sources.list with s/lucid/maverick/ but that didn't help. Does anyone know how to fix this? Thanks!

    Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >