Search Results

Search found 3435 results on 138 pages for 'david peek'.

Page 47/138 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• modprobe ndiswrapper - not found

  - by David

  I'm trying to use ndiswrapper on a Slackware 12 (I think) box, but I'm running into a problem with modprobe. Everything I find online says that it should be working, but for some unknown reason it isn't. Here's what I've done so far: Installed ndiswrapper (latest tarball, make, make install) Ran ndiswrapper -i on the WinXP driver for my USB wireless card Ran ndiswrapper -l which tells me the driver is present and the device is present (lsusb also confirms the device is present) Ran ndiswrapper -m which put an alias for wlan0 in /etc/modprobe.d/ndiswrapper.conf Ran depmod -a Ran modprobe ndiswrapper which tells me "FATAL: module ndiswrapper not found" Ran modprobe -l which shows no listing for ndiswrapper I even tossed in a reboot or two while trying various combinations of the above, still nothing. So naturally ifconfig wlan0 up isn't working because the device isn't being created, presumably because the module isn't loading the driver. Does anybody have any suggestions? Everything points to the notion that this should work fine, but modprobe just isn't able to find what it needs. Have I missed an important step?

  Read the article

• Completely unintuitive Apache/PHP memory-freeing behavior

  - by David

  Okay, this one's weird. I have a Turnkey Linux server with a gig of dedicated RAM. It's running WP3.2 with a boatload of plug-ins. It's a new site, so it has very limited traffic (other than search engines, maybe 20 hits a week). Now, for a few weeks, every few days, it would max out on main RAM, start eating up virtual RAM, and then crash. It's had this behavior for a while and I've been trying to figure out which element was causing the crash. Nine days ago, I pointed my external server monitor to this server. I wrote a 5-line HTML file (not PHP and not WP) that the server monitor accesses every minute, to see if the server is up. So, now, nine days later, the server has been rock solid, up all the time, no memory leak at all. I changed NOTHING on the server itself to see this behavior change. Have you EVER seen anything like this? All the server monitor is doing is retrieving a single, super-simple HTML file and all the memory leak problems have gone away. Weird, eh?

  Read the article

• Laptop Locking Up

  - by David

  I am having a very weird issue on a Lenovo W510 laptop. It will lock up randomly. I have had it lock up during post, during the boot-up of Linux, during login, and after the login. The following are tests that I have performed on the laptop. I ran memtest I took out the extra memory module. I swapped the HDD with another HDD that had Windows 7 on it. (It BSOD'd, and before anyone could possibly read the error line, it restarts.) I tried taking the battery out and booting with only the Power cord. The only other options I can think of the problem being are the motherboard or the PSU. If anyone has any advice, I appreciate it. If not, the HP guy will be here in a few days to fix it. I would just love to call them up and tell them that the service is no longer needed.

  Read the article

• How to upgrade OS on Mac Mini with external USB Drive?

  - by David

  We have a G4 Mac Mini, circa 2005, running Mac OS X 10.4 Tiger, and we want to upgrade to 10.5 Leopard. We have a Leopard install disk, but the optical drive in this mini is broken. So we transferred the install disk image to a USB HDD, but now we can't figure out how to boot off it. From what I've read in Mac forums, some PPC Macs, including some G4's, have been able to boot from USB, even though it sounds like this wasn't officially supported, and it may well depend on the specific model of USB drive and Mac. My Mac says CPU is "PowerPC G4 (1.2)" and Boot ROM is "4.8.9f4". I was hoping I might just find somebody here who had that same Mac Mini and find out if they could make it work. I'd especially like to know any specifics about the USB drive they found success with. Any insights at all would be appreciated. Thanks.

  Read the article

• vsftpd with pam_winbind.so

  - by David

  I'm trying to setup vsftpd to use logins from our domain. I want the ftp users to be able to login using their active directory username/password and have be able to have full access to /media/storage/ftp/username. I setup pptp using winbind and it is working fine, so I belive the issue is with vsftpd and pam. The ftp server runs and gives 530 for the login. I turned on debug for the pam module, but I see nothing in the syslog. Vsftp only logs a wrong login in its log. /etc/pam.d/vsftpd auth required pam_winbind.so debug /etc/vsftpd.conf listen=YES listen_ipv6=NO connect_from_port_20=YES anonymous_enable=NO local_enable=YES write_enable=YES xferlog_enable=YES idle_session_timeout=600 data_connection_timeout=120 nopriv_user=ftp ftpd_banner=Welcome to Scantiva! Authorized access only! local_umask=022 local_root=/media/storage/ftp/$USER user_sub_token=$USER chroot_local_user=YES secure_chroot_dir=/var/run/vsftpd/empty pam_service_name=vsftpd guest_enable=YES guest_username=ftp ssl_enable=YES allow_anon_ssl=NO force_local_data_ssl=NO force_local_logins_ssl=NO ssl_tlsv1=YES ssl_sslv2=YES ssl_sslv3=YES rsa_cert_file=/etc/ssl/private/vsftpd.pem

  Read the article

• Apache Redirect is redirecting all HTTP instead of just one subdomain

  - by David Kaczynski

  All HTTP requests, such as http://example.com, are getting redirected to https://redmine.example.com, but I only want http://redmine.example.com to be redirected. For example, requests for I have the following in my 000-default configuration: <VirtualHost *:80> ServerName redmine.example.com DocumentRoot /usr/share/redmine/public Redirect permanent / https://redmine.example.com </VirtualHost> <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> . . . </VirtualHost> Here is my default-ssl configuration: <VirtualHost *:443> ServerName redmine.example.com DocumentRoot /usr/share/redmine/public SSLEngine on SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key BrowserMatch "MSIE [2-6]" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown <Directory /usr/share/redmine/public> Options FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> LogLevel info ErrorLog /var/log/apache2/redmine-error.log CustomLog /var/log/apache2/redmine-access.log combined </VirtualHost> <VirtualHost *:443> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> . . . </VirtualHost> Is there anything here that is cause all HTTP requests to be redirected to https://redmine.example.com?

  Read the article

• In AD how to get groups the workstation is a member of from the workstation itself?

  - by David

  If I'm at the domain controller (in the Active Directory) to find out what groups the "XPSP3-A" workstation is a member of, I do: dsquery computer "CN=XPSP3-A,CN=Computers,DC=pvk,DC=local" -name XPSP3-A | dsget computer -memberof and receive the following: "CN=Sec Group 001,OU=OU1,DC=pvk,DC=local" "CN=Domain Computers,CN=Users,DC=pvk,DC=local" But how to do the same from the "XPSP3-A" workstation?

  Read the article

• Moving data to lower sectors on an SSD without defragging

  - by David Freitag

  I bought an Intel SSD drive a while back and now I want to dual-boot with it. But for some reason there are sectors near the end of the drive filled and I can’t seem to find a way to remove the data so that I can safely shrink the partition. I know I have sectors near the end full because I am using Defraggler to analyze my drive (not to defrag it). I can see what files need to be moved/deleted but short of actually deleting some drivers and/or other necessary files, I am completely stuck. This the diskmap: I am only able to shave off that last 1.72GB of space from the drive which isn’t even enough for the most minimal Linux install.

  Read the article

• How do I set or remove a Windows SMB password?

  - by David Is Not Here

  I recently purchased a computer with the intention of using it as network-attached storage. It presently has no Windows password and only one account. Can I create two different shares (share two different folders) in different ways -- make one publicly accessible, and make another only visible to people with a certain username/password combination? Creating multiple users isn't a problem, I just can't figure out where to start within Windows.

  Read the article

• Is this distributed database server idea feasible?

  - by David

  I often use SQLite for creating simple programs in companies. The database is placed on a file server. This works fine as long as there are not more than about 50 users working towards the database concurrently (though depending on whether it is reads or writes). Once there are more than this, they will notice a slowdown if there are a lot of concurrent writing on the server as lots of time is spent on locks, and there is nothing like a cache as there is no database server. The advantage of not needing a database server is that the time to set up something like a company Wiki or similar can be reduced from several months to just days. It often takes several months because some IT-department needs to order the server and it needs to conform with the company policies and security rules and it needs to be placed on the outsourced server hosting facility, which screws up and places it in the wrong localtion etc. etc. Therefore, I thought of an idea to create a distributed database server. The process would be as follows: A user on a company computer edits something on a Wiki page (which uses this database as its backend), to do this he reads a file on the local harddisk stating the ip-address of the last desktop computer to be a database server. He then tries to contact this computer directly via TCP/IP. If it does not answer, then he will read a file on the file server stating the ip-address of the last desktop computer to be a database server. If this server does not answer either, his own desktop computer will become the database server and register its ip-address in the same file. The SQL update statement can then be executed, and other desktop computers can connect to his directly. The point with this architecture is that, the higher load, the better it will function, as each desktop computer will always know the ip-address of the database server. Also, using this setup, I believe that a database placed on a fileserver could serve hundreds of desktop computers instead of the current 50 or so. I also do not believe that the load on the single desktop computer, which has become database server will ever be noticable, as there will be no hard disk operations on this desktop, only on the file server. Is this idea feasible? Does it already exist? What kind of database could support such an architecture?

  Read the article

• How do I find the source of soft page faults?

  - by David Robison

  I have Windows 7 x64 computer that according to Performance Monitor has 70,000 page faults / second when idling. That's seems like a lot to me (every other computer I check has basically 0 page faults / second when idling). If I use Resource Monitor or Process Explorer to check hard faults, I see that they are basically 0. So all the page faults are soft. Normally, soft page faults are not a problem, but I suspect they might be causing issues for this computer given there are so many. I would like to identify what programs are causing the soft faults. Are there any tools that exist the display the number of soft page faults for each process?

  Read the article

• Samba share will not connect (was working yesterday)

  - by David Gard

  I have a CentOS websver with a Samba share set up (\\webserver\websites). I was connected to this share just yesterday without issue, but today my Windows 8 PC will not connect to it. I've also tried making a connection from Windows 7 and Windows XP, all without success. I initially tried restarting my computer, but that did not work. I then tried restarting the Samba service on the webserver (service smb restart), and when that failed I restarted the webserver. All of that was to no avail, and I still cannot connect to the share. The webserver is contactable from my PC (and the others I tried), as the websites it hosts work fine and I'm able to Putty to the server. When connected to the webserver, I can see that Samba is running by using service smb status - service smb status smbd (pid 4685) is running... nmbd (pid 4688) is running... Can anyone please help me to get this share working? Here is my full Samba config (/etc/samba/smb.conf) - [global] workgroup = MYGROUP server string = Samba Server %v log file = /var/log/samba/log.%m max log size = 50 security = user encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 local master = no [websites] comment = Websites browseable = yes writable = yes path=/var/www/html/ valid users = dgard

  Read the article

• Redirect to new domain and preserve username

  - by David Brown

  I recently switched to a new domain for a version control server I run. The server is usually accessed with a username included in the url such as https://[email protected]/some/stuff. I want to redirect requests to the old domain to the new domain and preserve everything else in the url (including the username). So the former url would be redirected to https://[email protected]/some/stuff. Currently I have the following rewrite condition and rule: RewriteCond %{HTTP_HOST} sub\.olddomain\.com RewriteRule (.*) https://sub.newdomain.net$1 [R=301,L] This works except it drops the userinfo part of the URL. Is there a way I can preserve the user info?

  Read the article

• Nginx 502 Bad Gateway: It just won't stop

  - by David

  I have the same problem that most people seem to have with Nginx: 502 bad gateway errors. They are intermittent but typically happen more than once per session, which means my users are probably running into it nearly every time they use the app. I've tried adjusting fastcgi_buffers and fastcgi_buffer_size (in both directions) to no avail. I've tried various other things with the configuration file but nothing seems to work. Here's my config (note that I've stripped away most of the things I've tried, since they didn't work and I didn't want to bloat the file with a bunch of un-related directives): server { root /usr/share/nginx/www/; index index.php; # Make site accessible from http://localhost/ server_name localhost; # Pass PHP scripts to PHP-FPM location ~ \.php { include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.1:9000; } # Lock the site location / { auth_basic "Administrator Login"; auth_basic_user_file /usr/share/nginx/.htpasswd; } # Hide the password file location ~ /\. { deny all; } client_max_body_size 8M; } I'm running a small Rackspace cloud server, which should be plenty for handling an app with a small user base...

  Read the article

• Disable page cache on a specific page

  - by David Brunelle

  Hi, Not sure if I really am on the right forum, but if not, just tell me. I have a page that is coded in ASP (not .net) which is used to send email. We are currently having a problem in which the page seem to be sent twice sometime. Upon checking, we found out that those who have this problem are coming from big organisation, so it was suggested that their server might cache the file for some reason. I would like to know, is there a way in HTML (or ASP ) to prevent that from happening ? Or is it in IIS that we must set this up ? Thanks,

  Read the article

• Available filesystems for Linux that are case-insensitive?

  - by David

  I have a client whose web application was written entirely in a windows environment and served from windows. Unfortunately there's way to many cases of get "file/At/Somelocation.php" where the file is actually something horrible like "File/at/SomeLocation.PHP". I really don't want to be forced to work in Windows but it will take weeks if not longer to fix all the casing issues. Am I SOL here?

  Read the article

• Why would NeoOffice specify the font size for some Heading styles in percentages, and not points?

  - by david.sykes

  and is there any way of changing it?

  Read the article

• Secondary Monitor Flickers Off

  - by David Robison

  I have a Windows XP computer with two monitors attached. The secondary monitor occasionally flickers off and then back on. It kind of looks like it is going into power saving mode, then immediately exiting. I have tried swapping the two monitors, and this consistently happens on the whichever one is connected as the secondary one. The video card I am using is a "Gigabyte GeForce 9600GT 512MB Silent".

  Read the article

• How to make PDF pages with U3D images print properly?

  - by David Thornley

  I'm creating some PDF files that have three-dimensional images (U3D) in them. When I bring them up in Acrobat, everything is fine until I try to print the file. If I've viewed a page, it prints fine, showing the U3D image as I last saw it. If I haven't viewed a page yet, the printout is blank. (I can demonstrate this right from the Print dialog, by previewing pages.) The only reference I've seen to printing U3D is in the PDF Standard, which says, basically, that this should work. It recommends "PV" or "PO" for the A key in the 3D activation dictionary, and I'm using libharu which uses "PV".

  Read the article

• Restricting access to a subdirectory on linux

  - by David

  I'm looking for a way to make a directory accessible only to its parent directories. That is, suppose you have two directories, A and B, at the same level in the file hierarchy. Now suppose that you have a directory A' which is a subdirectory of A. I'd like to enforce that A is able to access the contents of A' but B is not. My problem is that I'd like to use a library (directory A) which builds on top of a legacy version of another library (directory A'). At the same time, I want to be able to use the newest version of this legacy library (directory B). I want to make sure that people aren't somehow using library A and linking against new library B by enforcing that library A must use library A'. I could just link A against library B, but then I'm risking compatibility.

  Read the article

• Internet Explorer wont open docx files, saves them as zip

  - by David Gard

  I have several docx documents on an Intranet for my work, but IE8 refuses to open them, instaed only saving them as a zip (filename_docx.zip). This seems to be only an IE8 problem (surprise, surprise!) as both FF and Chrome open the documents just fine. Unfortunately as this is work based, I cannot simply drop IE as I would, in favour of a decent browser. Does anybody know how to fix this issue in IE? Thanks.

  Read the article

• Enabling Compiz Viewport Switcher key bindings

  - by David Moles

  I'm running compiz 0.8.2 with compizconfig on Scientific Linux 6.2 with Gnome 2.28.2. In the compizconfig "General Options" I have "Desktop Size" set as follows: Horizontal Virtual Size: 6 Vertical Virtual Size: 1 Number of Desktops: 1 This gets me the layout I want, i.e. 6 workspaces in a horizontal layout. Ctrl-alt-cursor-keys work fine for switching between them. However, I can't figure out how to get key bindings for specific workspaces. I've tried enabling "Viewport Switcher" in compizconfig, and tried various combinations both in "Number-based viewport switching" and "Go to specific viewport", to no apparent effect. My first thought was that something else was eating the specific key bindings I chose, but I think I've tried every combination of shift, control, alt and super (i.e., the Windows key) by now. I tried setting 6 desktops under "General Options" instead of one desktop with horizontal virtual size 6, but that doesn't seem to make a difference either. What am I missing?

  Read the article

• How to determine non-movable files in Windows 7?

  - by David

  Is there a way to determine which unmovable files are preventing Shrink Volume from releasing the full potential free space? Background: I have a 90 GB partition with Windows 7 on it, and 60 GB free space. I want to shrink it down to about 40 GB, and use the reclaimed 50 GB for a separate data partition. The Shrink Volume tool in Disk Management is only willing to give me 8 GB back. My understanding is that this is because of immovable files. I've followed the instructions found here, which involved disabling hibernation, pagefile, system restore, kernal dump, making sure all related files were deleted, and defrag'ing. I have successfully followed those same instructions before on this same drive, and partitoned the original 150 GB space into 90 GB and 60 GB, but I'm not so lucky this time.

  Read the article

• DVD drive not recognized

  - by David Oneill

  I'm in the midst of building a computer (first time builder) I got everything plugged in, and hit the power button. After the excitement of the first boot coming up on my screen, I was looking through the BIOS settings. However, joy soon turned sour, as I looked at the list of installed SATA devices. My DVD drive wasn't on the list :( So, what are common things I should check/try?

  Read the article

• My laptop can't share a printer with my PC

  - by david

  I have a Belkin wireless router and all devices including my laptop can connect to the internet. However I can't get my laptop running on Windows XP to connect to my printer through my PC running on Windows Vista. I read all the posts but nothing works. I get an error message on my laptop saying 'The name of my network' doesn't give me permission. How do I change this?

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >