Search Results

Search found 1902 results on 77 pages for 'expansion cards'.

Page 47/77 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• Windows Disk I/O Analysis

  - by Jonathon

  It appears that we are having a problem with the disk i/o speed on our Windows 2003 Enterprise Edition server (64-bit). As we were initializing a database that created two 1G tablespaces on 3 different machines, it became obvious that the two smaller machines (each 32-bit Windows 2003 Standard Edition with less RAM) killed the larger machine when creating the files. The larger machine took 10x as long to create the tablespaces than did the other machines. Now, I am left wondering how that could be. What programs or scripts would you guys recommend for tracking down the I/O problem? I think the issue may be with the controller card (all boxes are hardware RAID 10, but have different controller cards), but I would like to check the actual disk I/O speed as well, so I have some hard numbers to work with. Any help would be appreciated.

  Read the article

• solaris + dladm + what is unknown state and how to bring it to up?

  - by yael

  I installed Solaris 10 on my netra machine from dladm show-dev I can see which interface are down or up all interfaces are connected to the Cisco switch , and all leds are light's on all LAN cards but I not understand why all interfaces except e1000g0 are in unknown ? Please advice how to bring the unknown interfaces to up ? # dladm show-dev e1000g0 link: up speed: 1000 Mbps duplex: full e1000g1 link: unknown speed: 0 Mbps duplex: unknown e1000g2 link: unknown speed: 0 Mbps duplex: unknown e1000g3 link: unknown speed: 0 Mbps duplex: unknown nxge0 link: unknown speed: 0 Mbps duplex: unknown nxge1 link: unknown speed: 0 Mbps duplex: unknown nxge2 link: unknown speed: 0 Mbps duplex: unknown nxge3 link: unknown speed: 0 Mbps duplex: unknown

  Read the article

• Buying Dual Monitors of different size and resolution

  - by rutherford

  I'm about to go choose a dual monitor setup: 1) Is there any reason why I can't just walk out and buy the two TFT screens I like (a wide screen and a 'portrait' screen) and combine them? Mainly wide screen would be for gaming, and portrait for browsing. I'd want the desktop stretching from one to the other (ie drag pointer, apps from one screen to the other) 2) Also do I need separate gfx cards for each monitor or can one cover both? any performance cost? 3) And can I have separate background images for each, seeing as they'll be different resolutions?

  Read the article

• SLI Artifact issues

  - by sloughk

  When I enable SLI I keep getting artifacts in random games and in Windows Aero sometimes . It doesn't seem to be about over-heating as it happens randomly, and sometimes whole computers just crashes (not blue-screen, just black gone...) My setup: Geforce 8800 GTS 320MB ( http://www.bfgtech.com/bfgr88512gtoce.aspx ) x 2 GIGABYTE EX58-UD4 Windows 7 RC PSU 800W I've got the latest NVIDIA drivers and F5 BIOS update (*SLI update*). When I disable SLI and use the cards separately they are working just fine even in games. Any idea why this might happen?

  Read the article

• Converting a Full HD Inspiron 9400 laptop LCD to a standalone monitor

  - by jhaukur

  Has anyone tried converting a LCD laptop monitor (17" full HD in this instance) to a stand-alone monitor? Are there any converters that one can buy to send DVI or VGA signals to the plug that is used to connect said LCD to the laptop motherboard? My laptop is the infamous Dell Inspiron 9400 (1705) model. They can have awesome monitors but if you check out ebay, there are many there for sale for little to nothing since the graphic cards fault unsually often in those machines. I'd like to be able to use the LCD and just scrap the rest.

  Read the article

• Help: Best way to do a TV-out in 7300GT Nvidia video card?

  - by Martin Ongtangco

  I'm planning to recycle my old PC and build a Media Center using an open-source (C#) software called MediaPortal. My old PC has a GeForce 7300GT with a TV-out plug built-in. When I tested it last night, it wouldn't detect my JVC tv (CRT) using the current drivers. I even purchased a new copper-based TV-Out to RCA cable. I searched all 3 AV channels. The video card has 3 output ports: 2 DVI & 1 s-video. I used the s-video with a S-Video to RCA out cable. I swapped between PAL & NTSC So what I did was I downloaded the first version of an Nvidia driver for 7 series cards, but still even with the old console, it couldn't detect the TV. I'm running out of viable ideas. Anyone here had the same problem and fixed it? Any suggestion is appreciated. Thank you!

  Read the article

• AHCI and Memtest86+

  - by satanicpuppy

  I've got a motherboard with SATA AHCI enabled, and I need to disable it to run Memtest86+ (because Window's built-in RAM diagnostic tool isn't worth a barrel of warm snot), and because the Memtest developers are too lazy to fix the bootloader problem. Fine, I know how to do that. The problem is, I, in a moment of insanity driven by the fact that I work with hardware RAID cards all the time, felt the need to enable the onboard RAID. In retrospect, this was stupid: the onboard raid is a joke, but I'm stuck with it. My question is, if I disable AHCI am I going to lose the RAID information? I haven't been able to find a definitive yes or no anywhere, and I'm not in the mood to find out the hard way.

  Read the article

• What software can I use to pinpoint why Windows Server 2003 takes 15 seconds for any operation?

  - by Dr. Zim

  Ram is about 1/2 in use, four CPUs are all but idle. I tried "Microsoft Server Performance Advisor" with no luck. No entries in the Event Log for hardware failures, etc. And yet I can click on the start menu and wait 15 seconds for any new attempt. Launching software takes 30 seconds to respond. The server has an 8 drive WD RE 250 gig each Dell Perc 6 Sata raid array with Intel gigabit network cards. Anyone have any software titles that could analyze what is going wrong with this server?

  Read the article

• Buying Dual Monitors of different size and resolution

  - by rutherford

  I'm about to go choose a dual monitor setup: 1) Is there any reason why I can't just walk out and buy the two TFT screens I like (a wide screen and a 'portrait' screen) and combine them? Mainly wide screen would be for gaming, and portrait for browsing. I'd want the desktop stretching from one to the other (ie drag pointer, apps from one screen to the other) 2) Also do I need separate gfx cards for each monitor or can one cover both? any performance cost? 3) And can I have separate background images for each, seeing as they'll be different resolutions?

  Read the article

• Which hardware changes require operating system reinstallation?

  - by Mark

  I'm about to upgrade my computer but might keep some parts. Just wandering what I would have to keep to prevent me having to reinstall my OSs, at the moment I have a dual boot setup with ubuntu and windows 7. I'm pretty sure you can't just take your hard drive with the OS on it and put it into a different box and keep going (can you?) but I know you can change the graphics cards, secondary hard drives and ram with out a problem. So what is it that you can't change? The CPU? Motherboard? Thanks for any replies

  Read the article

• How to tell Windows 7 to ignore a default gateway

  - by zildjohn01

  I currently have 2 network cards in my PC -- one connected to an internal network on a router with a disconnected WAN port (10.x.x.x), and one connected to the internet through a consumer router (192.168.0.x). Windows seems to recognize them correctly (my "Network and Sharing Center" lists them as "No Internet" and "Internet" respectively), however when I try browsing the internet it always tries the internal network's default gateway, rather than the one with internet access. Trying to ping a website results in "Reply from 10.0.0.1: Destination net unreachable.". A simple "route delete 0.0.0.0 mask 0.0.0.0 10.0.0.1" fixes the problems, but they return upon reboot, or upon renewing my IP. Is there any way to tell Windows to ignore one NIC's default gateway, or to at least give them priorities?

  Read the article

• Crossover cable in addition to normal network connection on servers?

  - by Zero0ne

  I have 2 servers, both with Windows 2003 R2 Each have 2 NIC ports that are 10/100/1000 They are both connected to our LAN + joined to the domain (1 NIC port free on each server) The problem is that our main router is only 10/100 on the ports that these servers are connected to. Since one server is going to host SQL 2005 and the other will be running Altiris NS7, I was hoping that I could use a crossover cable to connect the two directly, thus taking advantage of their 1gbps NIC cards. Is this possible? If so what steps do I need to take to accomplish this? What needs to be done to make sure that when the app server is communicating with the SQL server that it is using the direct link vs traversing the LAN? Thanks a lot!

  Read the article

• How to use Ralink RT2501/RT2573 as wifi access point in Debian Linux

  - by user60813

  Hi, I have a fit-PC server with Debian GNU/Linux (Lenny). I would like to use it as a wifi access point since my Linksys WRT54GS has become unstable. I have a USB Ralink wifi NIC. When I insert the card to USB I can see this with lsusb: Bus 001 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter I have tried following various HOWTOs on using wifi card as AP in Linux, however, it seems that the card cannot go into monitor mode. I believe this is because I must use a newer driver or upload non-free firmware or something like that. I have tried installed wicd, but it does not help. I bought this wifi adapter because I was told that it is one of the most common used Linux supported wifi cards that can be used as access point and a lot of other stuff. So my question is: How do I set up this USB wifi card as wireless access point in Debian Lenny?

  Read the article

• Bridge virtual machines out WLAN interface

  - by Thomas

  It seems that my wlan card (intel 5100 AGN) firmware doesn't allow "spoofing" MAC addresses. This has the side effect of destroying the capability to bridge out my virtual machines on that interface. Apparently this is a common thing on wlan cards. I can see the incoming traffic just fine in my virtual machines, but their DHCP queries don't get bridged out of the WLAN card. It works perfectly well when using the wired ethernet port. Is there a workaround for this? MAC-NAT or something? I don't want to route my virtual machines out to the Internet because I don't want my host OS to even have an IP address. I'm using Linux and KVM for virtualization.

  Read the article

• Creating an office network and monitoring all activity without a proxy

  - by Robert

  We are setting up our office network and would like to track all the websites visited by our employees. However, we would not like to use any proxy based solutions. Our work is highly dependent on applications in which you cannot configure a proxy. Hence, the approach we would like to follow is setting up a router inside a computer (something like this : http://www.techrepublic.com/article/configure-windows-server-2003-to-act-as-a-router/5844624) This will also allow us to attach multiple ethernet cards and have redundancy in internet connectivity with complete abstraction from the user about which connection is being used. But most importantly, since all the traffic will be going through the computer (configured as a router) I assume there will be a way to run packet analysis on all the request / responses being made. For example, list all the FTP servers connected to (port 21), give a graph of all the URLs visited per day by frequency. Is there already a software which does this ? Or is it possible to build something like this ?

  Read the article

• Audigy 2 Coaxial to Coaxial/Optical connection possible?

  - by Chris

  Hello, The original question is deleted, and asked again below with accurate information. Edit: Excuse me for my ignorance, my friend has a Logitech Z-5500 set. I thought after comparing those systems on Google images that he had the Z-680, but he hasn't. This set has a single Digital coaxial for DVD or CD players or PC sound cards (requires coaxial cable, sold separately) cable. This single cable was connected to the orange tulip connector (SPDIF coaxial out) on the backside of his onboard HP Elite m9070, this connector is broken. How can I use the digital out with a single cable coaxial cable on the Audigy2 (see image below) (I have the following converters for my disposal, can I use one of these? 3.5 mm male - coax optical mini optical male - toslink optical female 2 x toslink optical female, toslink coupler, optical audio extension note: Is it possible to connect a toslink cable with an mini optical male - toslink converter on the digital out of the Audigy 2? (see image below)

  Read the article

• Computer not displaying anything

  - by Justen

  The computer in question worked last week. It's brand new, never been connected to the internet, up-to-date parts, etc. Last week, I installed some 3D software on it, then shut it down and waited for the license files that arrived this week. I've done this to 4 other PCs with the same hardware and software. I've tried: Hooking it up to 3 different monitors using different video cables 2 other graphics cards and a handful of other things like switching which port it's plugged into before and after a restart. I have the driver disc, and a windows reinstallation disc, but they won't do me any good because no display at all for any interval of time. All the fans are moving: psu, gfx, cpu etc, so I don't believe it's a power issue. Here are the specs I know of: 4GB RAM 8800 GTX 700w PSU Intel dual core (not sure of model) Anyways, I'm open to ideas.

  Read the article

• LCD monitor reports incorrect maximum resolution

  - by SLaks

  I have four 20" Planar 2010M LCD monitors with a maximum resolution of 1600 x 1200 connected to two nVidia video cards (8600 GT and 7600 GS). I'm running Windows Server 2003 x86. Recently, two of the monitors have started mis-reporting their maximum resolution as 1280 x 1024. When this first happened, I used nVidia's Custom Resolutions feature to force the monitors back to 1600 x 1200. Yesterday, however, I upgraded nVidia's video card driver, and ever since, I cannot get the DVI one back to 1600 x 1200. When I add the custom resolution in nVidia's control panel, if I set either the width or the height to even a single pixel more than 1280 x 1024, nothing changes when I click Test (the monitor doesn't even flash black, although after 15 seconds, it flashes black and doesn't change). After adding Does anyone know what the problem is? Is there anything I can do about it?

  Read the article

• Yum Update fails due to conflicting perl packages

  - by amRit

  Hi I have a CentOS 5.2 i386 Production box with Qmail, LAMP etc now since it showed me that it could upgrade to 5.3, i downloaded all the packages using yum update However, the update fails due to perl packages conflicting I believe that while installing Qmail, I had tried for Mailscanner and thus it upgraded the per itself I read somewhere that we can uninstall the conflicting rpms and then go for the upgrade But, I am about 50 % sure that if I go ahead and uninstall perl, my server will crash like a falling house of cards Also, perl is needed by variety of packages working including vpopmail etc Thus, I request anyone to please tell me if we have a safer solution to this IF there is no solution to this, then can somebody please teach me how to backup and restore Qmail as it is. I can handle the rest of the things I sincerely appreciate those who have read and even thought about my problem In anticipation of a solution Regards amRit

  Read the article

• Change Linux Console's Default Monitor

  - by Tim M

  Is there any way to specify which monitor the console is displayed on in Linux? Details: I have a 3 monitor setup with 2 video cards. When I boot the computer, the BIOS displays on the PCI graphics card (which has a small monitor). When starting Linux, the console is displayed on the same monitor. Is there a way to have the console output on a different monitor? I'm using the vesafb framebuffer. I don't see a way in my BIOS to change the default video card.

  Read the article

• How can I disable Ctrl+Shift+Arrow from causing my screen to flip?

  - by nizzle

  Windows 7 Home Premium, Catalyst Control Center. Without any apparent reason, after booting my PC, I got this little balloon "HD 4600 Drivers updated". I did not install any new cards or drivers or anything. But now, when I try to select an entire word by pressing Ctrl + Shift + ? / ? my screen flips left to right and upside down. Where can I disable this annoying shortcut? OR Any other way of selecting the entire word? There is no option for this in Catalyst Control Center.

  Read the article

• What lasts longer: Data stored on non-volatile flash RAM, optical media, or magnetic disk?

  - by Chris W. Rea

  What lasts longer: Data stored on non-volatile flash RAM (USB stick or SD cards?), optical media (CD, DVD, or Blu-Ray?), or magnetic disk (floppies, hard drives?) My gut tells me optical media, but I'm not sure. Furthermore, which of those digital media would be most suitable for long-term data storage where environmental issues are unknown, such as low/high temperature or humidity? For example, what digital media could be stored in a basement, attic, or time capsule, and be expected to survive a reasonably long time? e.g. a lifetime, and then some. Update: Looks like optical media and magnetic tape each have one vote below. Does anybody else have an opinion or know of a study comparing the two?

  Read the article

• Mac keeps switching to second graphics card

  - by 1.21 gigawatts

  I have a MacBook Pro and whenever I enter certain apps (video camera app or Photoshop for example, the graphics card switched. I didn't know this was going on at first; just that the screen kept changing colors as I opened or closed different software. Later someone told me that the software was causing the OSX to switch graphics cards. It's annoying. How do I keep one graphics card (the better one) enabled all the time? I don't care about power consumption because it is plugged in all the time (though I'm curious how much difference it makes). I just want one graphics card enabled.

  Read the article

• unusual webpage access problem

  - by user28163

  This is one of the weirdest problems I've ever seen and I'm out of ideas. I cannot access a couple of websites from my home pc (for 3-4 days now), or at least they go really really slow ~700b/s I can access these same websites fine from my laptop from same IP address. - The websites originate from different countries and are huge popular sites. - I have tried both my PC's network cards. - I have reformatted my PC. - I have reset my router to factory settings. - I have created virtual computers on my PC, and from inside those I cannot access the webpages. - I have flushed my dns. - I tried specifying my dns server addresses to 8.8.8.8 and 8.8.4.4. I can only access the webpages using my PC, if I first connect to an outside VPN. Again, these sites work fine on the 2 other pcs in this house (same ISP and internet connection). help plz :)

  Read the article

• 2 GPUs (for multi-monitor setup)

  - by A Dwarf

  I have a machine to which I need to connect a second monitor. This machine currently hosts a ATI Radeon HD 4770 with two DVI adapters. The second monitor to be hooked to this machine is a VGA monitor. Until I find a DVI-VGA adpater, I'm thinking installing a second graphics card which does have a VGA adapter, an NVidia card. Can I successfully run both AMD and NVidia cards on this machine? Any specifics I must be aware of, like how to ensure the ATI card to be the main card? Operating system is Windows 7

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >