Search Results

Search found 4066 results on 163 pages for 'intel x25'.

Page 47/163 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• Sound card not detected in 13.04

  - by Ganessh Kumar R P

  I have a problem with my sound card. I don't have volume up or down option anywhere. In the setting -> Sound I don't have any card detected. But when I run the command sudo aplay -l, I get the following output **** List of PLAYBACK Hardware Devices **** Failed to create secure directory (/home/ganessh/.config/pulse): Permission denied card 0: MID [HDA Intel MID], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 And the command lspci -v | grep -A7 -i "audio" outputs 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at f0f20000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode]) -- 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d3efc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 07:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 So, I assume that the drivers are properly installed but still I don't get any option in the settings or volume control. The same card used to work well back in 2010 versions(04 and 10) Any help is appreciated. Thanks

  Read the article

• No sound after upgrading to Ubuntu 11.10 from win7

  - by Tilman

  just as a prefix to my question, i'd like to note that i'm just now entering the world of Linux (unless you count my android, but that's a very different experience...) i have two computers now that run Ubuntu 11.10, the first of which i've had very little problems with, aside from figuring out the basics. the second, from which i'm writing this question, has (up to this point) only had one problem.... no sound. i've read a couple questions similiar and found little help as the component catalog doesn't have my computer listed. (in fact i'm not suprised this is a pos i had my mom grab from her work before they officially closed the doors behind them) had perfect sound before hand, and no sound now. sudo lspci -v brings up 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) Subsystem: Intel Corporation Device d608 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at ff980000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel any help would be greatly appreciated, me and my gf just wanna watch a damn movie lol

  Read the article

• Problems when rendering code on Nvidia GPU

  - by 2am

  I am following OpenGL GLSL cookbook 4.0, I have rendered a tesselated quad, as you see in the screenshot below, and i am moving Y coordinate of every vertex using a time based sin function as given in the code in the book. This program, as you see on the text in the image, runs perfectly on built in Intel HD graphics of my processor, but i have Nvidia GT 555m graphics in my laptop, (which by the way has switchable graphics) when I run the program on the graphic card, the OpenGL shader compilation fails. It fails on following instruction.. pos.y = sin.waveAmp * sin(u); giving error Error C1105 : Cannot call a non-function I know this error is coming on the sin(u) function which you see in the instruction. I am not able to understand why? When i removed sin(u) from the code, the program ran fine on Nvidia card. Its running with sin(u) fine on Intel HD 3000 graphics. Also, if you notice the program is almost unusable with intel HD 3000 graphics, I am getting only 9FPS, which is not enough. Its too much load for intel HD 3000. So, sin(X) function is not defined in the OpenGL specification given by Nvidia drivers or something else??

  Read the article

• Internal speakers do not work

  - by Nikcefo

  I have a new (from scratch, not update) installation of Ubuntu 12.10 on my notebook, Asus A3Ac (It is based on Intel Centrino - Pentium M with full duplex Intel HDA codec). In older versions of Debian-based systems Intel HDA audio didn't work correctly. Alsamixer display wrong outputs and inputs (more than notebook really have). In clean installations internal speakers were playing, but they didn't mute when headphones was plugged in. There was a solution (propably not the best but working) - edit as root /etc/modprobe.d/alsa-base.conf and add a line "options snd-hda-intel model=z71v position_fix=1". After restart it worked correctly (alsamixer displayed correct devices and internal speakers were muted after I plugged in headphones). It was also working in Ubuntu 12.04. In Ubuntu 12.10 I have another problem. The alsamixer in default (don't have to edit alsa-base.conf) display correct outputs and inputs but internal speakers don't working if the headphones isn't plugged in. I have to manually disable "Auto-Mut" option in alsamixer, then the internal spakers works (but of course they don't mute when the headphones are pluged in). Thanks for any idea how to fix it. I'm not sure if it is a bug or it's caused by a "specific hardware". Tomas

  Read the article

• Is my graphics card in use or not?

  - by Lindhe94

  I have a Samsung Series 7 NP730U3E which is running Ubuntu Gnome 13.10. This computer have an Intel Core i5 3337U an AMD Radeon HD 8570M on the inside. Ubuntu 13.10 is said to have driver support for this graphics card, but I am not sure whether or not this is the case. When I check System Settings Details it says "Graphics: Intel® Ivybridge Mobile" and lspci | grep VGA returns VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09). But lshw -c video returns *-display description: Display controller product: Mars [Radeon HD 8730M] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:47 memory:e0000000-efffffff memory:f7e00000-f7e3ffff ioport:e000(size=256) memory:f7e40000-f7e5ffff *-display description: VGA compatible controller product: 3rd Gen Core processor Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:f7800000-f7bfffff memory:d0000000-dfffffff ioport:f000(size=64) What is the case? Is my graphics card is use, or do my laptop have undiscovered powers yet to yield?

  Read the article

• Helping install mrcwa and solve problems with f2py in Ubuntu 14.04 LTS

  - by user288160

  I am sorry if this is the wrong section but I am starting to get desperate, please someone help me... I need to install the program mrcwa-20080820 (sourceforge.net/projects/mrcwa/) because a summer project that I am involved. I need to use it together with anaconda (store.continuum.io/cshop/anaconda/), I already installed Anaconda and apparently it is working. When I type: conda --version I got the expected answer. conda 3.5.2 If I tried to import numpy or scipy with python or simple type f2py there are no errors. So far so good. But when I tried to install this program sudo python setup.py install I got these errors: running install running build sh: 1: f2py: not found cp: cannot stat ‘mrcwaf.so’: No such file or directory running build_py running install_lib running install_egg_info Removing /usr/local/lib/python2.7/dist-packages/mrcwa-20080820.egg-info Writing /usr/local/lib/python2.7/dist-packages/mrcwa-20080820.egg-info Obs: I am trying to use intel fortran 64-bits and Ubuntu 14.04 LTS. So I was checking f2py and tried to execute the program hello world f2py -c -m hello hello.f from here: cens.ioc.ee/projects/f2py2e/index.html#usage and I had some problems too: running build running config_cc unifing config_cc, config, build_clib, build_ext, build commands --compiler options running config_fc unifing config_fc, config, build_clib, build_ext, build commands --fcompiler options running build_src build_src building extension "hello" sources f2py options: [] f2py:> /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/hellomodule.c creating /tmp/tmpf8P4Y3/src.linux-x86_64-2.7 Reading fortran codes... Reading file 'hello.f' (format:fix,strict) Post-processing... Block: hello Block: foo Post-processing (stage 2)... Building modules... Building module "hello"... Constructing wrapper function "foo"... foo(a) Wrote C/API module "hello" to file "/tmp/tmpf8P4Y3/src.linux-x86_64-2.7 /hellomodule.c" adding '/tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.c' to sources. adding '/tmp/tmpf8P4Y3/src.linux-x86_64-2.7' to include_dirs. copying /home/felipe/.local/lib/python2.7/site-packages/numpy/f2py/src/fortranobject.c -> /tmp/tmpf8P4Y3/src.linux-x86_64-2.7 copying /home/felipe/.local/lib/python2.7/site-packages/numpy/f2py/src/fortranobject.h -> /tmp/tmpf8P4Y3/src.linux-x86_64-2.7 build_src: building npy-pkg config files running build_ext customize UnixCCompiler customize UnixCCompiler using build_ext customize Gnu95FCompiler Could not locate executable gfortran Could not locate executable f95 customize IntelFCompiler Found executable /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort customize LaheyFCompiler Could not locate executable lf95 customize PGroupFCompiler Could not locate executable pgfortran customize AbsoftFCompiler Could not locate executable f90 Could not locate executable f77 customize NAGFCompiler customize VastFCompiler customize CompaqFCompiler Could not locate executable fort customize IntelItaniumFCompiler customize IntelEM64TFCompiler customize IntelEM64TFCompiler customize IntelEM64TFCompiler using build_ext building 'hello' extension compiling C sources C compiler: gcc -pthread -fno-strict-aliasing -g -O2 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC creating /tmp/tmpf8P4Y3/tmp creating /tmp/tmpf8P4Y3/tmp/tmpf8P4Y3 creating /tmp/tmpf8P4Y3/tmp/tmpf8P4Y3/src.linux-x86_64-2.7 compile options: '-I/tmp/tmpf8P4Y3/src.linux-x86_64-2.7 -I/home/felipe/.local/lib/python2.7/site-packages/numpy/core/include -I/home/felipe/anaconda/include/python2.7 -c' gcc: /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/hellomodule.c In file included from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/ndarraytypes.h:1761:0, from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/ndarrayobject.h:17, from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/arrayobject.h:4, from /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.h:13, from /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/hellomodule.c:17: /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/npy_1_7_deprecated_api.h:15:2: warning: #warning "Using deprecated NumPy API, disable it by " "#defining NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION" [-Wcpp] #warning "Using deprecated NumPy API, disable it by " \ ^ gcc: /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.c In file included from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/ndarraytypes.h:1761:0, from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/ndarrayobject.h:17, from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/arrayobject.h:4, from /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.h:13, from /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.c:2: /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/npy_1_7_deprecated_api.h:15:2: warning: #warning "Using deprecated NumPy API, disable it by " "#defining NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION" [-Wcpp] #warning "Using deprecated NumPy API, disable it by " \ ^ compiling Fortran sources Fortran f77 compiler: /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort -FI -fPIC -xhost -openmp -fp-model strict Fortran f90 compiler: /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort -FR -fPIC -xhost -openmp -fp-model strict Fortran fix compiler: /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort -FI -fPIC -xhost -openmp -fp-model strict compile options: '-I/tmp/tmpf8P4Y3/src.linux-x86_64-2.7 -I/home/felipe/.local /lib/python2.7/site-packages/numpy/core/include -I/home/felipe/anaconda/include/python2.7 -c' ifort:f77: hello.f /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort -shared -shared -nofor_main /tmp/tmpf8P4Y3/tmp/tmpf8P4Y3/src.linux-x86_64-2.7/hellomodule.o /tmp/tmpf8P4Y3 /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.o /tmp/tmpf8P4Y3/hello.o -L/home/felipe /anaconda/lib -lpython2.7 -o ./hello.so Removing build directory /tmp/tmpf8P4Y3 Please help me I am new in ubuntu and python. I really need this program, my advisor is waiting an answer. Thank you very much, Felipe Oliveira.

  Read the article

• Linux installation on Acer Aspire One D270

  - by ronnie

  I was planning to buy Acer Aspire One D270 within a few days and as everybody installs linux on their netbook I was also planning to do that. Now, my question is how is Acer's hardware compatibility with linux and specifically in respect to the new Acer Aspire One D270. Has anybody tried installing linux on these new netbooks. It will be a great help if a D270 user can share his/her experience with linux usage. I read on some forums that there is some linux driver issue with Intel GMA 3600 and that people are not able to adjust their brightness. So, as I am a linux noob is this a major issue or not. Specs: RAM : 2Gb DDR3 Processor: Intel N2600(Cedar Trail) Graphics: Intel GMA 3600 HardDisk: 320Gb 5400 rpm

  Read the article

• Setting environment variables when executing Eclipse via Unity launcher icon

  - by Nullptr

  My question is a followup for the following: How to pin Eclipse to the Unity launcher? I created Eclipse's icon to the Unity launcher based on the selected answer at the above link. However, when I launch Eclipse via this icon, the environment variables are not properly set. I need to call . /opt/intel/bin/compilervars.sh intel64 to use Intel compiler tools in Eclipse. However, launching via the icon can't do it. Of course, running manually Eclipse on the terminal is okay. I tried to place . /opt/intel/bin/compilervars.sh intel64 on several places such as /etc/profile and /etc/bash.bashrc. But, still not working. Where is the best and correct place to call such environment setup?

  Read the article

• ubuntu desktop installation problem, a lot of error messages

  - by veerendar

  Hi I am getting error messages while trying to install ubuntu 12.04 on my desktop(intel pentium D). and the error messages are: *checking battery state... [412.633532] end_request:I/O error .dev sr0, sector 1291684 [435.997503] SQUASHFS error: squashfs_readdata failed to readbloack 0x275fcda4 [435.9975xx] SQUASHFS error: unable to read fragment cache entry page [275fcda4] . . [524.000055] exception Emask 0x0 SAct 0x0SErr 0x0 action 0x6 frozen ata5.00 : cmd a0/00:00:00:08:00/00:00:00/00 tag0 pio 16392 in res 58 /00:02:00:08:00/00/a0 Emask 0xf(timeout) [524.000292] ata5.00 status : {DRDY DRQ} I was able to install on another pc(intel atom) but not on this pc(intel pentium D), Can any one help me in successful installation. Thanks!

  Read the article

• How do I get an Acer Aspire One D270 working?

  - by ronnie

  I was planning to buy Acer Aspire One D270 within a few days and as everybody installs linux on their netbook I was also planning to do that. Now, my question is how is Acer's hardware compatibility with linux and specifically in respect to the new Acer Aspire One D270. Has anybody tried installing linux on these new netbooks. It will be a great help if a D270 user can share his/her experience with linux usage. I read on some forums that there is some linux driver issue with Intel GMA 3600 and that people are not able to adjust their brightness. So, as I am a linux noob is this a major issue or not. Specs: RAM : 2Gb DDR3 Processor: Intel N2600(Cedar Trail) Graphics: Intel GMA 3600 HardDisk: 320Gb 5400 rpm

  Read the article

• Ubuntu doesn't see my phone (Sony Xperia Tipo)

  - by ola

  When I connect my phone Xperia Tipo to my Ubuntu 12.04, the USB icon does not appear in a launcher. lsusb gives me following results: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 8086:0189 Intel Corp. Bus 001 Device 004: ID 1bcf:2880 Sunplus Innovation Technology Inc. Bus 003 Device 003: ID 0fce:5170 Sony Ericsson Mobile Communications AB I installed Wammu and it does not see phone either: Wammu is now searching for phone: All finished, found 0 phones No phone has been found! On the phone I have debbugging turned on and it sees Ubuntu. Can I ask for instruction step by step? I am a begginer on Ubuntu.

  Read the article

• No sound from internal speaker but headphones OK

  - by Aris Boch

  The problem: The system won't play sound on the internal speaker of the laptop, but only on the headphone. When I put the headphone jack half in and fiddle around with it, then it'll play even on the internal speakers (the system apparently believes, that the headphone are in). What should I do? The technical data: Laptop modell Medion Erazer X6815 matatabisama@matatabisama-X6815:~/Downloads$ sudo aplay -l | egrep ^card card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog] card 0: PCH [HDA Intel PCH], device 1: ALC269VB Digital [ALC269VB Digital] card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Ubuntu 12.04 64 matatabisama@matatabisama-X6815:~/Downloads$ uname -a Linux matatabisama-X6815 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• Can I get the Waves Maxx speaker effects to work in Ubuntu?

  - by Rafael

  I have a new machine that comes with JBL 2.1 Speakers with Waves Maxx Audio 3. On Windows it sounds perfect, though in Ubuntu 12.04 I get cheap/sound with simple mp3 files. I have tried a few things on different blogs but no luck so far. Any ideas? aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: N700 [Logitech Speaker Lapdesk N700], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0

  Read the article

• Cheap sound on speakers - Dell XPS L502X

  - by Rafael

  I have a new machine that comes with JBL 2.1 Speakers with Waves Maxx Audio 3. On Windows it sounds perfect, though in Ubuntu 12.04 I get cheap/sound with simple mp3 files. I have tried a few things on different blogs but no luck so far. Any ideas? aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: N700 [Logitech Speaker Lapdesk N700], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0

  Read the article

• Ubuntu cant load sound cart

  - by Reza Marefaty

  I have installed Ubuntu 12 and i cant see any volume controller on it and so no audio player can detect any sound card and nothing shown in system setting - sound - output tab. but i can see my hard ware by typing this command : aplay -l Return : List of PLAYBACK Hardware Devices ** card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: U0x4d90x20 [USB Device 0x4d9:0x20], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 How can i activate sound ? Edit : This info may helep for the solution : sudo lspci | grep Audio 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 04:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]

  Read the article

• internal error message pops up after each time system is rebooted

  - by Biju

  I had installed ubuntu 12.04 using wubi. But each time i boot the system an internal error message pops up. As show below:- Executable path /usr/share/apport/apport-gpu-error-intel.py Package xserver-xorg-video-intel 2:2.17.0-1ubuntu4 Problem Type crash Apportversion 2.0.1-0ubuntu7 and so on.. I had earlier upgraded to ubuntu 12.04 from ubuntu 11.10. And encountered the same issue. Hence i uninstalled the OS and reinstalled using wubi. I had posted the same query in ubuntu.com/support (Question Number: 195525) But couldnt find a solution. I am using dell inspiron with intel pentium. Need ur help in resolving this issue. thanking u, Biju

  Read the article

• Freezes if desktop effects is used.

  - by munir

  I have found that using desktop effects in Ubuntu versions later than 8.10 causes the desktop to freeze after a few seconds on my PC. the command lspci -nn gave the following 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) and with lspci -k I have 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) Kernel driver in use: i915 Kernel modules: i915 The intel graphics cards seems to have some performence issues with xorg driver. However I have not noticed any freeze in Ubuntu 8.10. There are some workarounds at https://wiki.ubuntu.com/X/Bugs/Lucidi8xxFreezes to make them work. But I can't find out what workaround should I do with my graphics controller. I have tried workaround F but it did not help. can anyone help me find a workaround for my graphics card? and is it actually possible to use desktop effect in this graphics card ?

  Read the article

• Freezes if desktop effects is used [closed]

  - by munir

  I have found that using desktop effects in Ubuntu versions later than 8.10 causes the desktop to freeze after a few seconds on my PC. the command lspci -nn gave the following 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) and with lspci -k I have 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) Kernel driver in use: i915 Kernel modules: i915 The intel graphics cards seems to have some performence issues with xorg driver. However I have not noticed any freeze in Ubuntu 8.10. There are some workarounds at https://wiki.ubuntu.com/X/Bugs/Lucidi8xxFreezes to make them work. But I can't find out what workaround should I do with my graphics controller. I have tried workaround F but it did not help. can anyone help me find a workaround for my graphics card? and is it actually possible to use desktop effect in this graphics card ?

  Read the article

• Acer Extensa 5620 - Graphic unknown!

  - by Nycxzon

  I install Ubuntu 12.04 Beta 2, I found out the my graphic driver is "Unknown" and experience is "Standard". Please help me know how to install my graphic driver. as per my laptop specs: Mobile Intel GM965 Express Chipset with integrated 3D graphics, featuring Intel Graphics Media Accelerator (GMA) X3100 with up to 358/3845 MB of Intel Dynamic Video Memory Technology 4.0 (8 MB of dedicated system memory, up to 350/3765 MB of shared system memory), supporting Microsoft DirectX 9. Hope you can help me! Thanks in advance! Noob @ Ubuntu :) Updates! ______________ I found a solution! I found a site where I ask how to check the graphic of my system. by using terminal command "glxinfo" command ask me to install mesa-utils! and update. After that, My graphic driver is listed! Thanks for your continues support! :)

  Read the article

• Problem with the screen resolution on 12.04

  - by sveinn

  I just installed Ubuntu on my laptop. The screen resolution is stuck in 1024x768. The screen is made for 1280x800. When I run xrandr I get: xrandr: Failed to get size of gamma for output default Screen 0: minimum 800 x 600, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 61.0* 800x600 61.0 1280x800 isn't offered and I get gamma size error. I was going to look into the Xorg.conf file but I couldn't locate it. 1280x800 was displayed in Windows 7 and I think it is being displayed in Grub before Ubuntu starts also. Here are some details about my computer: CPU: Intel atom D2500 1.86GHz Chipset: Intel 945GSE+ICH7M LCD: 14" TFT 16:9 Resolution ratio: 1280*800 Video Card: Intel integrated GMA950 Does anyone know how to fix this?

  Read the article

• Will Ubuntu be releasing an update for Cedar Trail Processors?

  - by Alan

  There is a file available on the Intel web site with the file name "cdv-gfx-drivers-1.0.1_bee.tar.bz2" and a date of July 6, 2012. It can be found by searching the Intel Download Center for the filename or the string "Linux* PowerVR Graphics/Media Drivers". The download page links to the file, release notes and a link, Enabling hardware accelerated playback that takes one to a page containing links to two pdf documents titled "Enabling Hardware Accelerated Playback for Intel® AtomTM Processor N2000/D2000 Series", one for Ubuntu and one for Fedora. The instruction and release notes speak to working with kernel 3.1.0 and since I do not feel I have the skills, knowledge or training to do anything else but, follow the instructions to the "T", I am very reluctant to try anything on my freshly updated 3.2.0 kernel. I would much rather use a Ubuntu supported kernel that applies these drivers and doesn't break anything in the process. Is it a case where this is so new that Canonical has not yet included these drivers but, soon will do so?

  Read the article

• Problem with the screen resolution on Ubuntu 12.04

  - by sveinn

  I just installed ubuntu on my laptop. The screen resolution is stuck in 1024x768. The screen is made for 1280x800. When I run xrandr I get: xrandr: Failed to get size of gamma for output default Screen 0: minimum 800 x 600, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 61.0* 800x600 61.0 1280x800 isn't offered and I get gamma size error. I was going to look into the Xorg.conf file but I couldn't locate it. 1280x800 was displayed in Windows 7 and I think it is being displayed in Grub before ubuntu starts also. Here are some details about my computer: CPU Intel atom D2500 1.86GHz Chipset Intel 945GSE+ICH7M LCD 14" TFT 16:9 Resolution ratio 1280*800 Video Card Intel integrated GMA950 Does anyone know how to fix this?

  Read the article

• Premières démonstrations de MeeGo, le concurrent de Chrome et d'Android issu de la fusion de Maemo d

  Mise à jour du 15/04/10 Première démonstration de MeeGo Le concurrent de Chrome et d'Android issu de la fusion de Maemo de Nokia et de Moblin d'Intel Intel et Nokia avait récemment mis en ligne la première mouture de leur nouvel issu de leur collaboration (lire ci-avant) mais cette version était encore très incomplète. Sur son "channel" dédié sur Youtube, Intel vient de d'en dévoiler un peu plus. Une première démo montre un netbook tandis que la deuxième illustre bien la volonté des deux constructeurs de faire un système qui puisse s'adapter à une grande variété de terminaux (TV, mobiles... et même aux voitures si l'o...

  Read the article

• Ubuntu 12.04 on Bangho

  - by reyquito

  This question is (mostly) for people in Argentina. ¿Have anyone tried installing Ubuntu 12.04 on a Bangho notebook (with i3-560 processor)? I haven't found any experiences online with this brand. The specs of the sistem are below (in spanish): Procesador Intel Corei3 Serie 2300 Memoria 4Gb. DDR3. - Disco Rígido SATA 500Gb. Chipset Intel HM65 Video Intel HM65 configurable hasta 1748MB Placa de red 10/100/1000, Wireless 802.11b/g/n Bluetooth Pantalla 15.6" HD (1366 x 768) - Peso 2,3Kg. Best regards, Q

  Read the article

• Ubuntu will not install on my Dell Inspiron 580

  - by AndrewC

  I'm trying to install ubuntu on my Inspiron 580 (Intel Core i3 4Gb Ram Intel HD Graphics) but am having no success installing from CD or Windows installer all result in a purple rapidly flashing screen with the Ubuntu with 5 dots below it splash which doesn't change. I have tried releases 12.04.1 LTS (CD and windows installer), 11.10 (CD after reading it was certified for the 580) and today 12.10 (CD) all produce the same install failure. My Dell 1704PT monitor is connected to the intel HD board using an HDMI to DVI adaptor though I have tried a VGA cable and still got the same flashing screen. Any help gratefully received as i want to get away from Windows 7 Home Premium.

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >