Search Results

Search found 13082 results on 524 pages for 'ip camera'.

Page 47/524 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• GRE keepalive with Linux and RouterOS

  - by eri

  I have a Linux host and couple of routerboadrs. I created a GRE tunnel, but Linux does not answer keepalive packages. Then router mark gre connection as unreachable, so I cant send to Linux host from router subnet. If linux sends something into tunnel (ping, etc.) - RouterOS mark connection as reacheble. Second and next packages routed nicely until one minute idle (no traffic). Tunnel in linux a make in this way: remote=x.x.x.x dev=gre21 network=10.21.0.0/16 ip tunnel add ${dev} mode gre remote ${remote} ttl 255 ip addr add 172.16.1.1/24 peer 172.16.1.21 dev ${dev} ip link set ${dev} up ip route add ${network} dev ${dev} And ip l: 14: gre21: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1476 qdisc noqueue state UNKNOWN link/gre 0.0.0.0 peer 109.60.170.15 How to set state "running"? How to keep alive tunnel? Ping in cron?

  Read the article

• VPN, Tunneling to hide 'real IP' through my proxy server while showing the client IP on 'real' server side

  - by mickula

  I would like to hide my 'main server' behind the load balancer, call it 'proxy server' Although I use some closed-source software on 'main server' and it needs the client IP address to operate well. When I'm setting up some VPN connection, in that software it displays the IP address of my 'proxy server'. Is there any option to set up such tunneling or vpn to: not reveal IP of 'main server' show the IP of 'client' in 'application' on 'main server' I will be grateful for all your replies and ideas.

  Read the article

• Make Apache to listen in multiple IPs

  - by Enrique Becerra

  Hi I'm in a big LAN, which is behind a proxy/firewall I'm working with an apache/php/mysql application, which is hosted in a small server besides my workstation. This server is connected to the LAN also and is behind the proxy: The server has a local IP assigned: 10.64.x.x Also, this server has a public IP assigned (or redirected from within the proxy/firewall) which is: 200.41.x.x I can't access public IP from LAN, but I can ping to the public IP from outside the building How should I configure Apache to listen also for public IP and open the 80 port for people accessing from outside the building?. It is set now to Listen 10.64.x.x:80 Thanks a lot in advance,

  Read the article

• Network - Routers conflicting in my subnet

  - by Richard

  I have a router whose IP is 192.168.1.1 and I be experiencing conflict with another router on my subnet (which probably has 192.168.1.1 as IP too). I think when it tries to connect to the network, eventually taking the place of my router because when I try to access the config page of my router, which appears to me is a config page from another router that is not mine. Do you have any solution except to change the IP of my router to an IP not common? As I have set up the exclusivity that only my IP router? I work with dynamic IPs (wireless networking) and static (for wired). How do I? I just wanna to do some setting in my router that affects all other, so that doesn't conflicts anymore.

  Read the article

• Why is IP to MAC address translation needed?

  - by b-gen-jack-o-neill

  On networks that use the TCP/IP protocol, why is the IP address translated into a MAC address? I mean, when every device knows its IP, why further use the MAC address and not use the IP number as the address directly?

  Read the article

• recover lost files from sd card(digital camera)

  - by user23950

  How do I recover lost data from sd card? I already tried using: Photorec Recuva Tune up undelete Pareto data recovery chkdsk x: /F from here: http://superuser.com/questions/128259/how-to-recover-images-from-memory-card But none of them worked. I think I've only lost the data yesterday. And I haven't used the camera. So there's a possibility that it is still there. But the question is how I can recover the images? I think its lost when I tried to connect the digicam with the computer. But the camera froze so I tried to remove the batteries then try again.

  Read the article

• ftp connection problem, vsftp server, active mode

  - by Mark Szente

  I have a server that runs vsftpd to handle ftp connections. One of my users have a notebook with Total Commander and WinSCP installed. Both ftp clients fail right after the connection is established to the server and it tries to download the directory listing without any particular error message. The weird thing is: the notebook works perfectly ok with other ftp servers. My ftp server also works well with other clients. In fact, this user also has a pc running on the same LAN as the notebook and the pc works well with the ftp server. We use active ftp connection mode. Passive mode works well but is not an option at this point. I would post more technical details but I don't even know what this problem is related to. Anyway, below is the server side tcpdump for the failed connection attempt. There's no further communication between the client and the server after the last line of log. Thank you very much for any hint! 23:39:24.514852 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: S 1314489715:1314489715(0) win 65535 <mss 1460,nop,wscale 3,nop,nop,sackOK> 23:39:24.514896 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: S 2633658883:2633658883(0) ack 1314489716 win 5840 <mss 1460,nop,nop,sackOK,nop,wscale 2> 23:39:24.520842 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 1 win 62500 23:39:24.523803 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 1:21(20) ack 1 win 1460 23:39:24.546858 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 1:15(14) ack 21 win 62497 23:39:24.546902 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 15 win 1460 23:39:24.547247 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 21:55(34) ack 15 win 1460 23:39:24.762806 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 55 win 62493 23:39:30.415011 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 15:28(13) ack 55 win 62493 23:39:30.454116 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 28 win 1460 23:39:31.036283 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 55:78(23) ack 28 win 1460 23:39:31.053018 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 28:34(6) ack 78 win 62490 23:39:31.053042 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 34 win 1460 23:39:31.053268 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 78:97(19) ack 34 win 1460 23:39:31.068969 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 34:40(6) ack 97 win 62488 23:39:31.069148 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 97:112(15) ack 40 win 1460 23:39:31.069179 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 112:119(7) ack 40 win 1460 23:39:31.076981 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 119 win 62485 23:39:31.077010 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 119:177(58) ack 40 win 1460 23:39:31.114979 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 40:45(5) ack 177 win 62478 23:39:31.115164 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 177:186(9) ack 45 win 1460 23:39:31.180966 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 45:53(8) ack 186 win 62476 23:39:31.181066 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 186:216(30) ack 53 win 1460 23:39:31.213065 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 53:80(27) ack 216 win 62473 23:39:31.213180 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 216:267(51) ack 80 win 1460 23:39:31.251086 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 80:86(6) ack 267 win 62466 23:39:31.251498 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054371220 0,nop,wscale 2> 23:39:31.290979 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 86 win 1460 23:39:34.251489 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054374220 0,nop,wscale 2> 23:39:40.249625 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054380220 0,nop,wscale 2> 23:39:43.695108 IP 195.70.xx.xx.21 > 62.201.xx.xx.1057: P 2280716551:2280716588(37) ack 3838413728 win 5840 23:39:52.248791 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054392220 0,nop,wscale 2> 23:40:16.245159 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054416221 0,nop,wscale 2> 23:40:29.853685 IP 195.70.xx.xx.21 > 62.201.xx.xx.1057: FP 37:51(14) ack 1 win 5840 23:40:31.241951 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 267:304(37) ack 86 win 1460 23:40:31.381708 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 304 win 62462

  Read the article

• how IP ban system works

  - by Remus Rigo

  hi all Can anyone tell me how the IP ban system works. I have Dynamic IP, every time i start my PC I have a different IP. I want to know how a site (like a chat system) knows my IP and it keeps me banned... thanks

  Read the article

• Cloud services, Public IPs and SIP

  - by Guido N

  I'm trying to run a custom SIP software (which uses JAIN SIP 1.2) on a cloud box. What I'd really like is to have a real public IP aka which is listed by "ifconfig -a" command. This is because atm I don't want to write additional SIP code / add a SIP proxy in order to manage private IP addresses / address translation. I gave Amazon EC2 a go, but as reported here http://stackoverflow.com/questions/10013549/sip-and-ec2-elastic-ips it's not fit for purpose (they do a 1:1 NAT translation between the private IP of the box and its Elastic IP). Does anyone know of a cloud service that provides real static public IP addresses?

  Read the article

• ftp connection problem, vsftp server, active mode

  - by Mark Szente

  I have a server that runs vsftpd to handle ftp connections. One of my users have a notebook with Total Commander and WinSCP installed. Both ftp clients fail right after the connection is established to the server and it tries to download the directory listing with the following error message: Timeout detected. Could not retrieve directory listing PORT command successful. Consider using PASV. Error listing directory '/'. The weird thing is: the notebook works perfectly ok with other ftp servers. My ftp server also works well with other clients. In fact, this user also has a pc running on the same LAN as the notebook and the pc works well with the ftp server. We use PORT ftp connection mode. Passive mode works well but is not an option at this point. I would post more technical details but I don't even know what this problem is related to. Anyway, below is the server side tcpdump for the failed connection attempt. There's no further communication between the client and the server after the last line of log. Thank you very much for any hint! 23:39:24.514852 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: S 1314489715:1314489715(0) win 65535 <mss 1460,nop,wscale 3,nop,nop,sackOK> 23:39:24.514896 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: S 2633658883:2633658883(0) ack 1314489716 win 5840 <mss 1460,nop,nop,sackOK,nop,wscale 2> 23:39:24.520842 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 1 win 62500 23:39:24.523803 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 1:21(20) ack 1 win 1460 23:39:24.546858 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 1:15(14) ack 21 win 62497 23:39:24.546902 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 15 win 1460 23:39:24.547247 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 21:55(34) ack 15 win 1460 23:39:24.762806 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 55 win 62493 23:39:30.415011 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 15:28(13) ack 55 win 62493 23:39:30.454116 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 28 win 1460 23:39:31.036283 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 55:78(23) ack 28 win 1460 23:39:31.053018 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 28:34(6) ack 78 win 62490 23:39:31.053042 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 34 win 1460 23:39:31.053268 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 78:97(19) ack 34 win 1460 23:39:31.068969 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 34:40(6) ack 97 win 62488 23:39:31.069148 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 97:112(15) ack 40 win 1460 23:39:31.069179 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 112:119(7) ack 40 win 1460 23:39:31.076981 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 119 win 62485 23:39:31.077010 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 119:177(58) ack 40 win 1460 23:39:31.114979 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 40:45(5) ack 177 win 62478 23:39:31.115164 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 177:186(9) ack 45 win 1460 23:39:31.180966 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 45:53(8) ack 186 win 62476 23:39:31.181066 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 186:216(30) ack 53 win 1460 23:39:31.213065 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 53:80(27) ack 216 win 62473 23:39:31.213180 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 216:267(51) ack 80 win 1460 23:39:31.251086 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 80:86(6) ack 267 win 62466 23:39:31.251498 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054371220 0,nop,wscale 2> 23:39:31.290979 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 86 win 1460 23:39:34.251489 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054374220 0,nop,wscale 2> 23:39:40.249625 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054380220 0,nop,wscale 2> 23:39:43.695108 IP 195.70.xx.xx.21 > 62.201.xx.xx.1057: P 2280716551:2280716588(37) ack 3838413728 win 5840 23:39:52.248791 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054392220 0,nop,wscale 2> 23:40:16.245159 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054416221 0,nop,wscale 2> 23:40:29.853685 IP 195.70.xx.xx.21 > 62.201.xx.xx.1057: FP 37:51(14) ack 1 win 5840 23:40:31.241951 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 267:304(37) ack 86 win 1460 23:40:31.381708 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 304 win 62462

  Read the article

• Keep source IP after NAT

  - by John Miller

  Until today I used a cheapy router so I can share my internet connection and keep a webserver online too, while using NAT. Users IP ($_SERVER['REMOTE_ADDR']) was fine, I was seeing class A IPs of users. But as traffic grown up everyday, I had to install a Linux Server (Debian) to share my Internet Connection, because my old router couldn't keep the traffic anymore. I shared the internet via IPTABLES using NAT, but now, after forwarding port 80 to my webserver, now instead of seeing real users IP, I see my Gateway IP (Linux Internal IP) as any user IP Address. How to solve this issue? I edited my post, so I can paste the rules I'm currently using. #!/bin/sh #I made a script to set the rules #I flush everything here. iptables --flush iptables --table nat --flush iptables --delete-chain iptables --table nat --delete-chain iptables -F iptables -X # I drop everything as a general rule, but this is disabled under testing # iptables -P INPUT DROP # iptables -P OUTPUT DROP # these are the loopback rules iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT # here I set the SSH port rules, so I can connect to my server iptables -A INPUT -p tcp --sport 513:65535 --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --sport 22 --dport 513:65535 -m state --state ESTABLISHED -j ACCEPT # These are the forwards for 80 port iptables -t nat -A PREROUTING -p tcp -s 0/0 -d xx.xx.xx.xx --dport 80 -j DNAT --to 192.168.42.3:80 iptables -t nat -A POSTROUTING -o eth0 -d xx.xx.xx.xx -j SNAT --to-source 192.168.42.3 iptables -A FORWARD -p tcp -s 192.168.42.3 --sport 80 -j ACCEPT # These are the forwards for bind/dns iptables -t nat -A PREROUTING -p udp -s 0/0 -d xx.xx.xx.xx --dport 53 -j DNAT --to 192.168.42.3:53 iptables -t nat -A POSTROUTING -o eth0 -d xx.xx.xx.xx -j SNAT --to-source 192.168.42.3 iptables -A FORWARD -p udp -s 192.168.42.3 --sport 53 -j ACCEPT # And these are the rules so I can share my internet connection iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A FORWARD -i eth0:1 -j ACCEPT If I delete the MASQUERADE part, I see my real IP while echoing it with PHP, but I don't have internet. How to do, to have internet and see my real IP while ports are forwarded too? ** xx.xx.xx.xx - is my public IP. I hid it for security reasons.

  Read the article

• Using iptables to forward traffic destined for specific ip via specific interface

  - by shapeshifter

  I want to forward traffic destined for a specific ip from my internal network via a specific interface. I have two interfaces which are currently load balanced. I need all requests for a certain ip to go out via eth0 otherwise my external ip changes and sessions are dropped. eg. all requests from 10.1.1.1/24 to ip 11.22.33.44 on port 443 must go out via interface eth0. How can I do this with iptables?

  Read the article

• Windows SMTP Server Outbound IP

  - by Josh

  I have a Windows 2008 server that has three IP bound to the NIC. I can select which IP Windows SMTP listens to, but I want to also set the IP address used when mail is sent. Where would I set which IP to use when sending email?

  Read the article

• how to access camera.java in on cick event?

  - by Srikanth Naidu

  hi , i am making a app which takes photo on button click i have camera.java which operates camera and takes photo how to i call it on the below event? public void onClick(DialogInterface arg0, int arg1) { setContentView(R.layout.startcamera); } Camera .java package neuro.com; import java.io.FileNotFoundException; import java.io.FileOutputStream; import java.io.IOException; import android.app.Activity; import android.hardware.Camera; import android.hardware.Camera.PictureCallback; import android.hardware.Camera.ShutterCallback; import android.os.Bundle; import android.util.Log; import android.view.View; import android.view.View.OnClickListener; import android.widget.Button; import android.widget.FrameLayout; public class CameraDemo extends Activity { private static final String TAG = "CameraDemo"; Camera camera; Preview preview; Button buttonClick; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.startcamera); preview = new Preview(this); ((FrameLayout) findViewById(R.id.preview)).addView(preview); buttonClick = (Button) findViewById(R.id.buttonClick); buttonClick.setOnClickListener( new OnClickListener() { public void onClick(View v) { preview.camera.takePicture(shutterCallback, rawCallback, jpegCallback); } }); Log.d(TAG, "onCreate'd"); } ShutterCallback shutterCallback = new ShutterCallback() { public void onShutter() { Log.d(TAG, "onShutter'd"); } }; /** Handles data for raw picture */ PictureCallback rawCallback = new PictureCallback() { public void onPictureTaken(byte[] data, Camera camera) { Log.d(TAG, "onPictureTaken - raw"); } }; /** Handles data for jpeg picture */ PictureCallback jpegCallback = new PictureCallback() { public void onPictureTaken(byte[] data, Camera camera) { FileOutputStream outStream = null; try { // write to local sandbox file system // outStream = CameraDemo.this.openFileOutput(String.format("%d.jpg", System.currentTimeMillis()), 0); // Or write to sdcard outStream = new FileOutputStream(String.format("/sdcard/%d.jpg", System.currentTimeMillis())); outStream.write(data); outStream.close(); Log.d(TAG, "onPictureTaken - wrote bytes: " + data.length); } catch (FileNotFoundException e) { e.printStackTrace(); } catch (IOException e) { e.printStackTrace(); } finally { } Log.d(TAG, "onPictureTaken - jpeg"); } }; }

  Read the article

• HTTP: can GET and POST requests from a same machine come from different IPs?

  - by NoozNooz42

  I'm pretty sure I remember reading --but cannot find back the links anymore-- about this: on some ISP (including at least one big ISP in the U.S.) it is possible to have a user's GET and POST request appearing to come from different IPs. (note that this is totally programming related, and I'll give an example below) I'm not talking about having your IP adress dynamically change between two requests. I'm talking about this: IP 1: 123.45.67.89 IP 2: 101.22.33.44 The same user makes a GET, then a POST, then a GET again, then a POST again and the servers see this: - GET from IP 1 - POST from IP 2 - GET from IP 1 - POST from IP 2 So altough it's the same user, the webserver sees different IPs for the GET and the POSTs. Surely seen that HTTP is a stateless protocol this is perfectly legit right? I'd like to find back the explanation as to how/why certain ISP have their networks configured such that this may happen. I'm asking because someone asked me to implement the following IP filter and I'm pretty sure it is fundamentally broken code (breaking havoc for at least one major american ISP users). Here's a Java servlet filter that is supposed to protect against some attacks. The reasoning is that: "For any session filter checks that IP address in the request is the same that was used when session was created. So in this case session ID could not be stolen for forming fake sessions." http://www.servletsuite.com/servlets/protectsessionsflt.htm However I'm pretty sure this is inherently broken because there are ISPs where you may see GET and POST coming from different IPs. Any info on this subject is very welcome.

  Read the article

• Does the iPhone 3G/3Gs camera put metadata in its images? (and how do you get it?)

  - by Ben Collins

  I've been trying to figure how whether the iPhone (either 3G or 3Gs) camera puts metadata into it's images. Anecdotally, it appears that it does (e.g., I've seen images posted on the web that included a bunch of metadata), but I can't find reference to it anywhere in the SDK documentation. So....does anyone have a definitive answer? Also, if there is metadata, how do I get at it?

  Read the article

• ddclient - wont update Invalid Keyword for 'ip' =

  - by stueng

  /etc/ddclient.conf use=web, web=checkip.dyndns.org/, web-skip='IP Address' protocol=easydns ssl=yes server=members.easydns.com login=stueng password='****' home.***.** /var/log/syslog Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: file /var/cache/ddclient/ddclient.cache, line 3: Invalid Value for keyword 'ip' = '' Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: skipping update of home.***.** from <nothing> to 90.193.*.*. Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: last updated <never> but last attempt on Mon Jun 4 13:01:57 2012 failed. Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: Wait at least 5 minutes between update attempts. Help?

  Read the article

• Sharing one static ip for both ftp and www service

  - by user11496

  Trying to figure out how to update the Zone record and configure webserver so that one application on the webserver is accessible by public. I'm completely not good at NS/DNS/NAT/firewall/routing/port forwarding/networking etc. "faraday" is the intranet name. Everyone within local network can access all applications hosted on "faraday". Hostname for webserver is "www", FTP server is "ftpserver". Both servers running RHEL4 OS. The goal is to allow anyone outside the company network (public) to access only one of the many applications on "faraday". Hope somebody can help me with some of the questions below, if not all. From zoneedit record, the static IP is used by FTP now. Can I use the same existing static IP - 219.95.10.100, for web service? Currently anyone who enter "http://www.abc.com.my" will be directed to "http://www.abc.com". I don't want this to change. Currently, no one else, except employee on local network, can access "faraday" web pages. How to configure so that when anyone type "http://thisapp.abc.com.my" on their web browser, the url will lead them to "http://faraday/thisapp" (application folder is /var/www/html/thisapp on RHEL4 web server). If possible, how to set the URL will continue to show "http://thisapp.abc.com.my" instead of "http://faraday/thisapp" How to limit/restrict user (those who are not from local network) so they only have access to "http://thisapp.abc.com.my", but not "http://faraday" or "http://faraday/anotherapp", etc. What's the configuration changes needed in /etc/httpd.conf on web server? Company domain name is "abc.com.my". Following is the zone records on www.zoneedit.com. Subdomain Type IP sdsl A 219.95.10.100 ftp CNAME sdsl.abc.com.my @ NS ns3.zoneedit.com @ NS ns7.zoneedit.com WebForward record: New Domain Destination Cloaked www.abc.com.my http://www.abc.com N On my local DNS server, there are 2 zone files: abc.com.my and pnmy.abc.com. > cat abc.com.my.zone ftp CNAME ftp.pnmy.abc.com. sdsl A 219.95.10.100 > cat pnmy.abc.com.zone ftp CNAME ftpserver ftpserver A 172.16.5.1 faraday CNAME www www A 172.16.5.2

  Read the article

• Setup static Ip in virtual box

  - by Haris

  I have as issue i am Ubuntu desktop and i have installed virtual-box(4.1) ISSUE:- Ubuntu 11.10 desktop is my host operating system and on Virtual-box i installed Ubuntu server selecting bridge adapter as my first adapter by default my network interfaces file get ip address by dhcp server but i want to setup an static ip. by changing network interface file to static and gave some static ips my internet stop working on guest operating system(virtual-box - Ubuntu server). Can any one help me how can i setup static on virtual-box so that my internet will work too on my guest operating system. thanks in advance.

  Read the article

• Fetch User's User agent,IP address

  Here i am going to give you example to fetch or to show or to store user's mobile/pc user agent, IP address.

  Read the article

• help redirecting IP address

  - by Alice

  Google has indexed the IP address of my site rather than the domain, so now I'm trying to set up a 301 redirect that will redirect the IP address and all subsequent pages to the domain. I currently have something like this in my .htaccess file (however don't think it's working correctly?): RewriteCond %{HTTP_HOST} ^12.34.567.890 RewriteRule (.*) (domain address)/$1 [R=301,L] I've used various redirect checker tools and keep getting the message: "... not redirecting to any URL or the redirect is NOT SEARCH ENGINE FRIENDLY" Am I doing something wrong or is there something else I should be trying? Thanks! Alice

  Read the article

• Problems with No-IP redirecting

  - by user171156

  I am setting up a webserver on my ubuntu desktop 13.04, everything is working fine except; When trying to access the server through the external host using no-ip, it gives the original index created by apache on setup. While when I try to connect to the server via my real IP address from externally, it goes to the correct index. I have been trying to figure out what the issue is on this problem as nothing is working because of that bad redirect, I'm wondering if anyone of you could help me out, or advise me in the right path. Thank you very much! PS; If more info needed I'll provide, but this should explain it all.

  Read the article

• Include multiple IP addresses in Google Analytics

  - by RubenGeert

  I sometimes access my own website from my home/work/girlfriend IP addresses. I'd like to create a filter that includes any of these and nothing else. I thought a custom include filter with a very basic regex should do the trick. The regex I use is 62\.58\.32\.193|77\.172\.143\.12$|213\.125\.166\.98 to include 62.58.32.193 and 77.172.143.12 and 213.125.166.98 and no other IP addresses. I obviously tested it before using it. However, pageviews seem to be stuck at zero even though I did generate internal traffic. Does anybody understand what I'm doing wrong?

  Read the article

• XConnect Announces Mobile-Compatible IP Exchange Platform

  Gateway will facilitate cross-network IP communications interconnection between members of the global GSM community and XConnect's federation customers.

  Read the article

• Powershell Win32_NetworkAdapterConfiguration Not "seeing" PPP Adapter

  - by Ben

  I am trying to get the IP of a PPP VPN network connection, but Win32_NetworkAdapterConfiguration does not seem to "see" it. If I interrogate all adapters using my script, it will see everything but the PPP VPN adapter. Is there a specific filter or something I need to enable, or do I need a different class? My Script: $colItems = Get-wmiobject Win32_NetworkAdapterConfiguration foreach ($objItem in $colItems) { Write-Host Description: $objItem.Description Write-Host IP Address: $objItem.IPAddress Write-Host "" } Script Output: Description: WAN Miniport (SSTP) IP Address: Description: WAN Miniport (IKEv2) IP Address: Description: WAN Miniport (L2TP) IP Address: Description: WAN Miniport (PPTP) IP Address: Description: WAN Miniport (PPPOE) IP Address: Description: WAN Miniport (IPv6) IP Address: Description: WAN Miniport (Network Monitor) IP Address: Description: Intel(R) PRO/Wireless 3945ABG Network Connection IP Address: 192.168.2.5 Description: WAN Miniport (IP) IP Address: ipconfig /all output: PPP adapter My VPN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : My VPN Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 10.1.8.12(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 0.0.0.0 DNS Servers . . . . . . . . . . . : 10.1.1.3 10.1.1.2 Primary WINS Server . . . . . . . : 10.1.1.2 Secondary WINS Server . . . . . . : 10.1.1.3 NetBIOS over Tcpip. . . . . . . . : Enabled Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Belkin Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Network Connection Physical Address. . . . . . . . . : 00-3F-3C-22-22-22 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.2.5(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 25 May 2010 20:33:19 Lease Expires . . . . . . . . . . : 22 May 2020 20:33:17 Default Gateway . . . . . . . . . : 192.168.2.1 DHCP Server . . . . . . . . . . . : 192.168.2.1 DNS Servers . . . . . . . . . . . : 192.168.2.1 NetBIOS over Tcpip. . . . . . . . : Enabled Thanks in advance, Ben

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >