Search Results

Search found 4144 results on 166 pages for 'macbook recovery'.

Page 47/166 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• How to rescue from an SD (SDHC) card that I can't reformat (possible hardware failure)

  - by sbwoodside

  I have a transcend 16GB SDHC card and a lot of photos on it that I'd like to recover. When I plug it into the SD card reader, it takes a while for the Mac to even recognize that there's a disk present, and it shows up as 1.07GB with geometry 520/64/63 (according to fdisk). First I tried file recovery: PhotoRec: no files are found (the images are in CR2 format and I'm using testdisk-6.14-WIP which claims to recognize that format under TIF) dd / ddrescue: they create a 1.07GB image, same problem as above TestDisk: doesn't find any partitions to recover I found a source saying that the correct geometry for this type of SD Card is Heads 255, Sectors/Track 63, Cylinders 1953, so I tried manually setting that geometry in PhotoRec/TestDisk. No improvement. Next I tried formatting the disk with fdisk. After writing and quitting, I ran fdisk again and it reported that the new format hadn't been saved on the disk. I also tried resetting the format/partitions with TestDisk and that failed also. The fdisk log is below. I don't really care about the card, I've already ordered a new SanDisk card. But I'd like to get the data off. Maybe, is there any way to force dd or some other tool to create an image of the disk based on the original geometry and not on what the card "thinks" its geometry is? Or am I missing something?

  Read the article

• Mirror a RAID0 volume

  - by Ghostrider

  I have two SSD running in RAID0. The capacity and speed are just great. I use Windows Home Server to do incremental daily backups. This is fine and well and I've successfully restored from these backups. However. When one of the disks physically died. I was stuck without a working system until the replacement arrives so that I can restore the array from backup. WHS restoration takes about 5 hours which basically means that I'm losing entire day for the process. Is it possible to set up kind of a recovery volume for the RAID array? Use a single mechanical HDD that would be updated with the exact clone of the RAID array on a daily basis. This way if the array goes offline for some reason, I can just boot from the mechanical HDD, lose some perf but will still be able to work. The machine in question runs Windows 7. Creating RAID01 is not an option because of the high price of the SSD and the fact that it still doesn't protect against failure of RAID controller. Is there any way it can be set up?

  Read the article

• Hard drive failed, suspected filesystem corruption, still cannot salvage any data from harddrive

  - by Hippy-Head

  Firstly, I am terribly sorry if this is a duplicate, but I couldn't find a similar issue to mine, so here goes. I have a 1TB hdd bought around 8 months ago used as backup hard drive. I have not used the drive for a period of time whatsoever, and when I was trying to get back to some files on it, it was completely wiped just like that. At first it would not boot I tried everything from command line chkdsk and filesystem recovery software to rebuilt it. After a few attempts I managed to initialize it, at that time it was an achievement. The problems started when I tried to recover the data inside, I have used A LOT of software free and commercial software on both Mac and Windows, with the help of cmd or Terminal commands, however no data of any kind was recovered, even after leaving it thoroughly scan for around 9-10 hours all night sometimes longer, with no results at all. I am somewhat desperate, I am usually good at retrieving data from corrupt hard drives, but this is not the case. Call me paranoid, but I do not want to give it to someone to fix it for me, as I have a lot of photos and personal stuff that I do not want anyone to see.

  Read the article

• System32 files can be deleted in Windows 2008 but not in Windows 2003 [closed]

  - by Harvey Kwok

  I have been using Windows 2003 for a long time. There is a wonderful feature. I don't know the name of it but the feature is like this. You can rename or delete some important files inside C:\windows\system32. e.g. kerberos.dll. After a while, the deleted files will be automatically recovered. I think this is because those files are criticl enough that Windows cannot survive without them. However, in Windows 2008, this feature is gone. Instead, all the files in System32 are owned by TrustedInstaller. However, as a administrator, I can still take the ownserhip of the files and then delete them. Windwos 2008 won't recover the deleted files and hence the system is screwed next time it's reboot. So, I wonder why Windows 2008 dropping that wonderful feature. Was that auto-recovery feature also suffer from some issues? Does Windows 2008 have some other features that can prevent this type of disaster from happening?

  Read the article

• SQL Server rolling forward lots of transactions, what should I look at?

  - by Anthony D

  I am running SQL Server Express on a Windows XP Embedded box. It runs for a day or two, doing some transactional processing for a POS type system, and with another system pulling data out to an OLAP DB for processing. After a while, I see in the event viewer the sequence SQL Server puts out when it restarts, copy rights, command line parameters, and so on. It seems like that coincides with our OLAP process crashing. I then see that when it restarts our transaction DB, it does a recovery, pulling in 10K or so in transactions that need to be rolled forward. Does this mean SQL has crashed? I don't really see much to indicate what happened. Update 1 I noticed I have my memory limit set to 1MB per query and 2TB for the server. These are the defaults. I only have one GB in the box. We have seen SQL crash a whole box by just using all the system memory. In this case though the whole box is up when we get to it.

  Read the article

• How can I recover a Fedora 12 installation that is showing signs of disk errors?

  - by Bob Cross

  I am currently overseas (i.e., very far from my normal library of tools) and my primary machine that would normally act as the data server in the performance test that we're trying to run is failing to boot to Fedora 12 properly. This is a machine that, as of yesterday, was booting fine. However, this morning, very strange portions of the boot process were complaining with messages such as "unexpected 0x0 in rpcbind" and "bad file descriptor" (I don't have the error in front of me - scavenged a windows installation to get onto serverfault). Eventually, the boot hung for a long time at the NFS service and then brought up what looked like the KDE login screen but neither the mouse nor keyboard functioned. In olden days, I would try to get to a point where I could manage to run fsck and pray that the bad sectors would come back into alignment just long enough for me to scrape the critical data off of the machine. However, now that we live in the future, it seems like our options in situations like this should be a little more varied. Is there a way to recover a Fedora 12 installation with bad disk sectors that won't boot properly? For completeness, I am comfortable working with bootable recovery distros-on-CD and such but I don't know which one is likely to work best with modern Fedora. In the absence of guidance, I'm frantically torrenting the Fedora 12 Live CD and DVD, hoping to try rescue mode before tomorrow morning.

  Read the article

• Can I still restore partition table?

  - by Johannes Lund

  Once I was going to resize partitions on my Mac HD from Bootcamp. I changed my mind and was going to quit, but apparently I hit a button, which made every single mac partion dissapear, and windows 7 refused to restart and be reinstalled. The 1 TB large HD consists of 3 partions, I believe. Since I can't see their actual size (except bootcamp), this is how I recall it. Macintosh HD about 500GB (Somewhere around 700GB according to disk utillity, but 500 according to Finder, and 500GB was all I could access.) Lion Recovery disk Bootcamp 293.36 GB To fix this I connected my mac via target disk mode to a pc and ran TestDisk. However this is the results: Since I Don't have 10 reputation I cant post the image showing the testdisk results, so I post a link instead hoping it is ok. The two mac partitions' sizes are completely wrong, and BOOTCAMP isn't showing. I tested using disk utilities from the snow leopard dvd. There there is one 293.36 GB Mac OS Extended partition. Before I had the firewire cable for target disk mode I tried reinstalling windows. Without success I tried again formating BOOTCAMP. Was that a bad thing to do? Could it have overwritten data from Macintosh HD? Unfortunately I have no backup. I could bring it to some kind of computer repair firm though.

  Read the article

• Ext3 fs: Block bitmap for group 1 not in group (block 0). is fs dead?

  - by ip

  My company has a server with one big partition with Mysql database and php files. Now this partition seems to be corrupted, as reported from kernel messages when I tried to mount it manually: [329862.817837] EXT3-fs error (device loop1): ext3_check_descriptors: Block bitmap for group 1 not in group (block 0)! [329862.817846] EXT3-fs: group descriptors corrupted! I've tried to recovery it running tools from a PLD livecd. These are the tools I have tested: - e2retrieve - testdisk - photorec - dd_rescue/dd_rhelp - ddrescue - fsck.ext2 - e2salvage without any success. dumpe2fs 1.41.3 (12-Oct-2008) Filesystem volume name: /dev/sda3 Last mounted on: <not available> Filesystem UUID: dd51610b-6de0-4392-a6f3-67160dbc0343 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal filetype sparse_super Default mount options: (none) Filesystem state: not clean with errors Errors behavior: Continue Filesystem OS type: Linux Inode count: 9502720 Block count: 18987570 Reserved block count: 949378 Free blocks: 11555345 Free inodes: 11858398 First block: 0 Block size: 4096 Fragment size: 4096 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 16384 Inode blocks per group: 512 Last mount time: Wed Mar 24 09:31:03 2010 Last write time: Mon Apr 12 11:46:32 2010 Mount count: 10 Maximum mount count: 30 Last checked: Thu Jan 1 01:00:00 1970 Check interval: 0 (<none>) Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 128 Journal inode: 8 Journal backup: inode blocks dumpe2fs: A block group is missing an inode table while reading journal inode e2fsck 1.41.3 (12-Oct-2008) fsck.ext3: Group descriptors look bad... trying backup blocks... fsck.ext3: A block group is missing an inode table while checking ext3 journal for /dev/sda3 I tried also backup superblocks, same error result. There's any other tools I have to test before considering these disk definitely unrecoverable? Many thanks, ip

  Read the article

• Dropped WD External Harddisk, now it's shown as "Not initialized"

  - by Phelios

  So, the WD my passport external harddisk is dropped, and after that, the computer is unable to read it anymore. I was hopping if I can just find another case to try if the harddisk is still readable, but looks like the hard drive itself is not a normal SATA or PATA drive. I think it's modified. So, I can't find another case that I can try on. In the computer, I still can see the drive in the "Disk Management", but it's shown as Uninitialized, no size, and no drive letter. I've also tried a couple of recovery tools. Some can't detect at all, there is one (find and mount software) that can detect but shows 0 size. None of them can recover the data. WD is willing to replace it with a new one, but I still need to recover the data. Any way I can recover the data? UPDATE: I tried initialized it from the windows Disk Manager, but it give error "The request could not be performed because of an I/O device error."

  Read the article

• Where did my backup files go? Can they be recovered?

  - by Ken

  I just purchased a Western Digital Essential SE 1TB external hard drive from Best Buy at their recommendation. I then exchanged it for a Toshiba Canvio (I think that was the name). I have a Toshiba Qosmio X505-Q898. The Canvio locked up my computer and rewrote some kind of OS file, and erased all the restore points as well as the system image backup (according to Best Buy) just by plugging it in for the first time. Never even got to the install part or anything -- plugged it in and fried my computer. They spent about an hour and a half on my computer and got it back to a somewhat working condition and gave me access to my files. So now they say I have to back it up using my recovery disk and rewriting my OS. Enter the Essential. Brought it home last night, plugged it in and installed everything. Works perfect, no problems. Backed up everything on it. I unplugged and plugged it twice to make sure that everything was on it. Essential told me it had both the HDD and SSD backed up. So I reinstalled my OS. Plugged the Essential in and everything loads right up. Went to retrieve my files and the Western Digital has nothing on it. It shows all my music, pics, ETC. as still being on my computer and needing to be backed up, but since there are no files on my computer now. Where is this information coming from and where did my files go? It's about 810GB worth of files I've amassed over several years. Is there any way to recover data from this? I plan to contact Western Digital and Best Buy, just thought I would check here too. Any advice will be appreciated as a lot of these files are invaluable to me.

  Read the article

• Recover windows cached domain password

  - by theguy

  I have a computer from another small organization that works with our school. It was previously joined to another domain from elsewhere. The organization doesn't have an IT person so they didn't think of what they needed to do about the information on the computer before they moved it to our school. The previous user of the computer is no longer with the organization so no information about the password. The computer has information that needs to be accessed and programs so putting the hard drive on another computer and grabbing the information is a no go as I need the computer itself to be working as well. The computer is running Windows Vista Business Edition and is joined to a domain with a cached profile. The admin accounts are disabled by GPO. I've been asked to see if I could recover the password but running ophcrack gave me no hits on the cached profile. I'm not too familiar with password recovery tools that would work on a cached profile from a domain so I'm looking for answers here. Any other suggestions? Preferably something free as we're a small school and an easy to use liveCD solution like ophcrack would be appreciated.

  Read the article

• Recover data from hard drive with partitions (but not most data) overwritten

  - by Macha

  I have a 500GB hard drive I've been keeping around to recover data from that I removed from a failing NAS drive that got sort of... erratic at the end. I finally got rid of the NAS when during a firmware update it removed the partition table. Fast forward to a week ago, when I was building a new PC, and a mixup resulted in me placing the hard drive in question in the new PC and installing Windows XP on the first 100GB. I'm presuming any data on that first 100GB is now gone, but for the rest of it, is there any way I can recover it at home, as professional data recovery is currently too expensive? I have a blank 1TB HDD if I can store any images of that hard drive on. The problem was definitely with the NAS and not the hard drive, as the hard drive had a successful install of Windows when mistakenly place in the new PC, and there were capacitors in the NAS's circuitry clearly broken. The data I want to recover (in order of priority) is: High: Some jpgs of family photos. Medium: Some RAW files. (There are also jpg versions of all of these) Low: Some mp3s, avis and ISOs, I can re-rip most of these if need be, but it'd be handy not to have to. (I don't need a backup lecture, and if you can hold it in from nagging Jeff Atwood for it, you can hold it in from nagging me for it) In short: The partition tables are gone and overwritten. The data is not overwritten, except for an amount equal to the size of a Windows XP SP3 installation.

  Read the article

• SRM 4 Test Fails with message for some VM : Error: A specified parameter was not correct.

  - by Setesh

  Here are my architecture : For the protected site 4 Host VSphere Enterprise Plus, each one with 2 HBAs FC connected to the switch fabric, connected to an EMC CX4-120 1 VCenter 1 SRM For the recovery site 2 Hosts Vsphere 4 1 Vcenter 1 SRM 1 CX-4-120 The CX4-120 is connected to the second CX4-120 with ISCSI and the MirrorView / Asynchronous. I synchronise for the time 6 Lun on a FC DAE, 2 on a S-ATA DAE I have allocated 30% of the amount synchronised LUN for the SNAPSHOT us, but I have allocated them only on my S-ATA II DAE. It does not make a problem, my snapshot are correctly active. All the installation is new (hardware and software), installed in January with the last files available in download. I have a strange problem, and it's random, sometimes when I run a test on my RP, some VMs have this error : Error: A specified parameter was not correct. I don't know where to look. Any help is appreciated... PS : I have checked on all the VMs, no Floppy disk or CD attached. PS2 : There is severals VMs with RDM and OCFS2 filesystems on it.

  Read the article

• Un-do Windows disk convert HFS+

  - by BLAKE

  Last night, a friend asked my to give him a copy of a word document. He handed me an external hard drive and left. I plugged the hard drive into my file server running Windows Server 2003, opened disk management and clicked OK. (I know that in Windows 2003 you need to manually assign a drive letter to external drives.) I then looked at the drive in disk management and it said that it was unallocated space. I called my friend and he said that there was data on the drive, but he used it with his Mac Book. Aperantly when I clicked OK in disk management I converted the from HFS+ file system to something else. Is there any way to undo the disk convert? I immediately removed the drive, so there was no writing to it. Windows did not format the drive, it just converted it. Is the data still there? All the data recovery programs I have are for windows, can they read the Mac file system? I need to get the data back, what can I do?

  Read the article

• How to start MSSQL Server with corrupt model db

  - by Jordan McGuigan

  After moving some databases around (restoring, deleting, etc) we experienced an issue creating new databases. Specifically, When trying to create a new database MSSQL Server it failed because the "The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run". As some online solutions suggested, we tried to Start and Stop the MSSQL Service. Service would not restart because "Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive" (FYI: the drive has 100gb of free space). Tried restarting the machine the MSSQL Server is running on. When the server came back online, we received the same error. We have tried deleting tempdb.mdf and restoring the modeldb from the templates folder, but neither of these solved the issue. We are unable to connect to the database, even in single user mode. Many of the online solutions have us running SQL commands against the server, but we are unable to connect (even in single user mode) to the DB to run commands against the server. Specific error messages: Database 'model' cannot be opened. It is in the middle of a restore. (Microsoft SQL Server, Error: 927) The SQL Server (MSSQLSERVER) service is starting. The SQL Server (MSSQLSERVER) service could not be started. A service specific error occurred: 1814. We need the server up and running again ASAP.

  Read the article

• Windows 7 not booting after failed SRT (SSD caching) install

  - by david

  This is a fairly new computer, only about a month old. i7 2700k, z68 motherboard, with a 1.5tb WD black HD, and a 128gb crucial M4 ssd. I followed the instructions for setting up ssd caching, the SATA controller was set to RAID, I installed the intel software and enabled acceleration and it said everything went fine. But when I went to reboot, I received the lovely "Reboot and Select proper Boot device" error message. I checked the bios, and it was booting from the correct HD (I tried the only other option anyway just in case, it was the ~50 odd gb of unformatted space left on the SSD) AFter that I entered the raid until (ctrl-i at boot) and removed the acceleration and deleted the raid array (because it was being used as a cache this was non destructive) Still no boot. So I reinstalled win7 directly on the SSD, booted, and checked the HDD to make sure it hadn't been wiped. It hadn't, all the files were still there, including all the windows stuff. I backed up my data to an external drive just in case, but I'd really like to get this install booting again. I trawled the webs a bit, and have tried entering recovery mode and using the bootrec.exe and bootsect.exe to fix it, but to be honest I'm not sure what I'm doing with those. My question is basically: How do I make my harddrive bootable again?

  Read the article

• Un-do Windows disk convert HFS+

  - by BLAKE

  Last night, a friend asked my to give him a copy of a word document. He handed me an external hard drive and left. I plugged the hard drive into my file server running Windows Server 2003, opened disk management and clicked OK. (I know that in Windows 2003 you need to manually assign a drive letter to external drives.) I then looked at the drive in disk management and it said that it was unallocated space. I called my friend and he said that there was data on the drive, but he used it with his Mac Book. Aperantly when I clicked OK in disk management I converted the from HFS+ file system to something else. Is there any way to undo the disk convert? I immediately removed the drive, so there was no writing to it. Windows did not format the drive, it just converted it. Is the data still there? All the data recovery programs I have are for windows, can they read the Mac file system? I need to get the data back, what can I do?

  Read the article

• Can I recover a non-system disk deleted during 2008 R2 setup?

  - by serialhobbyist

  I've done a truly stupid thing and 'deleted' the data disk on a Server 2008 R2 box. Can I recover it? If so, how? I was rebuilding the box because a motherboard change had broken things. I've built loads of boxes and was going through the standard stuff without much concentration. I got to the disk screen which normally displays the two paritions on the drive: the recovery one and the system one. As normal, I deleted the two things I saw. It was only when two lots of unallocated space didn't merge into one that the full horror of what I'd done hit me. Yes, I've got backups... of the stuff I have space to back up. The real irony is that, earlier in the day, I'd ordered to 1 TB disks to deal with the problem. So, anyway, I'd really like to get this partition back because it'll save me a lot of time. How can I do it?

  Read the article

• Is it possible (and how if it is) dump two concatenaded disks in a new disk using DD?

  - by pedromarce

  Hi, I have a Lacie enclosure that has a setup with 2 500gb disks configured as 1 drive of 1TB, the only partition created for the whole drive is HFS+ journaled, but the controller in the enclosure is gone and so the drive refuses to mount anymore. I have been able to remove those two disks from the enclosure and connect them using USB ports and a program called R-studio (Raid recovery program) check that the setup the controller in the enclosure was using was both disks concatenated (Not Striped). And so configuring that option in R-studio I could be able to get back all the information. But before I got a license for r-studio for just one use, I would rather buying a new 1TB disk and try to write all the information of those two disks in this new one. I can use Mac or linux machines to do it, and I think it should be ok use DD command in linux to concatenate those two drives into the new one in the right order to get it working again in the new disk and I will reformat the old ones, but I am not sure. So, is it possible in this scenario to write both disks into a new one using DD? Any hints how the command would look? Thanks,

  Read the article

• Partition Magic 8 made TrueCrypt partition invisible

  - by gmancoda

  Partition Magic 8 took a dump on my TrueCrypt partition... and I let it happen! And now I am left with cleaning up the mess. In short, my encrypted partition is now invisible. TestDisk analysis says of the disk containing the encrypted partition: "Space conflict between the following two partitions". From the googling and searching on various sites, I have learned the following: Hex editing is beyond me. Partition recovery tools are useless. I am not ready to drop the big bucks for professional help. ... that I should have kept an external backup of the Volume header. Now, to get back the volume header, I am planning on recreating the exact same partitions on a new disk of the exact same model, and then encrypting it with the exact same password/keyfiles, and then exporting its volume header to a file. Finally, I hope to be able to restore this volume header on to my damaged drive. Before I undertake this plan, I would like to know if anyone else out there has tried it and, if so, how successful they were. All other suggestions and tips and welcome!! Thanks.

  Read the article

• sql server 2005 databse password recovery

  - by air

  i have one database in ms sql server 2005. i create this long time back, now want to modify it but i lost the password, i remember the user name for that database, is there any way to recover the password for that database or change its password ? Thanks

  Read the article

• Linux: file recovery (Urgent) [closed]

  - by Ashine

  Hi Firends, I desperately need some help regarding problem I am facing now. While creating a softlink for a very important file I gave the reverse command by mistake. Instead of giving it "ln target linkname" I have given it 'ln linkname target'. This has resulted in references pointing to target files are now pointing to links and the actual refernces to target files are lost. How can I recover the files back. "/home/user/data1" was original file location. "/home/user/db2" was the desired softlink for this data. I haveto give "ln data1 db2" but I have given 'ln db2 data1'. This has resulted in 'data1' being now pointing towards 'db2' and the actual data in 'data1' can not be retrieved. Some one please help. Thanks in advance.

  Read the article

• Oracle XE as local recovery database and Oracle Standard as main db

  - by jbendahan

  Hi, I just wanted to know what you guys think about this. I have an app written in Visual Basic .Net as my front end and and Oracle 11g Standart database as the back-end. So I have like 20 pc's running this app locally. They're all inserting, updating, deleting data on this single database. I want to develop a solution in the case that the server database crashes or cannot stay on line. So i think of having oracle 10g XE on each pc. Thus all the data will be stored in the local db. I think about running a proccess once in a while (ex. every 15 minutes) to send/get the data to/from the main server. What do you think about this strategy?

  Read the article

• EF recovery from invalidoperationexception caused by server being down

  - by Jonn

  I had a windows service relying on EF, and it was running fine until the server went down. The problem was after the server went up again, it didn't fix itself and still threw the error: INTERNAL ERROR: Execution of the command requires an open and available connection. The connection's current state is broken. Not being very proficient in EF I'm not aware of how I could recover from such a scenario, and why it occurred in the first place? Anyone had this happen before?

  Read the article

• Database Recovery

  - by user250545

  do u have any idea , which is the best software or best way to recover corrupt database in sql 2000/2005/2008

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >