Search Results

Search found 102655 results on 4107 pages for 'microsoft server 2008'.

Page 47/4107 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

  • How to get Windows Server 2008 VM to use multiple cores

    - by David Fraser
    I have a Windows Server 2008 machine running in VirtualBox. On initial installation, only one processor was made available, but now I want to run it as a multiprocessor machine. I have made all four cores available in the VirtualBox settings (as well as enabling VT-x/AMD-V and Nested Paging), but Task Manager still only shows one CPU. However, the four CPU cores are visible in Device Manager under Processors. In the event log on startup, I can see the following relevant events: EventLog.6009 Microsoft (R) Windows (R) 6.00.6002 Service Pack 2 Multiprocessor Free Kernel-Processor-Power.4 Processor 0 exposes the following: 1 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) How can I make this system actually boot up as a multiprocessor machine?

    Read the article

  • DFS-R (2008 and R2) 2 node server cluster, all file writes end in conflictAndDeleted

    - by Andrew Gauger
    Both servers in a 2 server cluster are reporting event 4412 20,000 times per day. If I sit in the conflictAndDetected folder I can observe files appearing and disappearing. Users report that their files saved by peers at the same location are overriding each other. The configuration began with a single server, then DFS-R was set up using the 2008 R2 wizard that set up the share on the second server. DFSN was set up independently. Windows users have drives mapped using domain based namespace (\domain.com\share). Mac users are pointed directly to the new server share created by DFS-R. It is PC users indicating most of the lost files, but there has been 2 reports by Mac users about files reverting.

    Read the article

  • How to best migrate one Windows 2008 R2 / SharePoint / Exchange / Terminal Services (All-in-one) int

    - by MadBoy
    Hello, My client has one machine with Windows 2008 R2 and everything on it. By everything I mean AD, DNS, SharePoint 2010 Standard, Exchange 2010 Standard, Terminal Services, Office 2010 and a bunch of additional apps. Everything stands on I7 x 2 and 36gb ram for 7 people total. I've decided that we should virtualize it and split things into 4 VM's and keep host only with Hyper-V installed to host all the machines. What problems should I expect? What good advices can you give. My plan is that when i move everything to VM's i will move vm's to safe place and format the host as it has a lot of really bad things happening on it. But this also means that everything will be wiped from current solution so I have to be sure that Exchange etc will work when host gets wiped. MadBoy

    Read the article

  • Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

    - by user46055
    Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

    Read the article

  • Cheapest server to run Windows 2008 R2?

    - by chopps
    Hey Everyone, I want to build a really cheap server to use for testing etc but don't want to spend alot of dough. Any recomendations on what kind of home pc/server would work for these requirements? Any place to get refurbs at a good price? Component Requirement Processor Minimum: 1.4 GHz (x64 processor) Note: An Intel Itanium 2 processor is required for Windows Server 2008 for Itanium-Based Systems Memory Minimum: 512 MB RAM Maximum: 8 GB (Foundation) or 32 GB (Standard) or 2 TB (Enterprise, Datacenter, and Itanium-Based Systems) Disk Space Requirements Minimum: 32 GB or greater Foundation: 10 GB or greater Note: Computers with more than 16 GB of RAM will require more disk space for paging, hibernation, and dump files Display Super VGA (800 × 600) or higher resolution monitor Other DVD Drive, Keyboard and Microsoft Mouse (or compatible pointing device), Internet access (fees may apply)

    Read the article

  • Windows 2008 Routing and Remote access server - access to the internet

    - by Ian
    I have a windows 2008 r2 remote access server set up and running. The remote access works fine. My problem is that the remote access server itself doesn't have access to the internet. The box has two interfaces, an internal and an external. Inbound connections come in on the external interface and RRAS responds. All wall and nice. I want to be able to use windows update, browse, etc from this box but can't as the outbound traffic just gets blocked. I've tried going into the RRAS mmc tool and opening the interface properties, under which there are two buttons for inbound and outbound filters. There I tried adding ports 80 and 443, but this doesn't work completely. I can see the connection initiating (Syn goes out) but the session never establishes itself. Anyone done this or got any suggestions?

    Read the article

  • How to fix Windows 2008 R2 BOOTMGR is missing

    - by RichardTheKiwi
    BOOTMGR IS MISSING PRESS CTRL+ALT+DEL TO RESTART Note: This is a VM on VMWare ESX server, but that should not matter I put in the 2008 R2 x64 install dvd and can get to recovery, but it lists no Operating Systems. Clicking on Next brings me to +=========================== System Recovery Options +=========================== Choose a recovery tool Operating system: Unknown or (Unknown) Local Disk ..... Command Prompt I start the command prompt, go to C:\ and perform a dir /a Apart from files I put there myself, these are showing $Recycle.Bin Documents and Settings [C:\Users] Program Files Program Files (x86) ProgramData Recovery System Volume Information Temp Users Windows Where to go next? Is it like the NTLDR problem with Windows 2003 where I can just drop a file in there and it will be hunky dory again?

    Read the article

  • How to get Windows Server 2008 VM to use multiple cores

    - by David Fraser
    I have a Windows Server 2008 machine running in VirtualBox. On initial installation, only one processor was made available, but now I want to run it as a multiprocessor machine. I have made all four cores available in the VirtualBox settings (as well as enabling VT-x/AMD-V and Nested Paging), but Task Manager still only shows one CPU. However, the four CPU cores are visible in Device Manager under Processors. In the event log on startup, I can see the following relevant events: EventLog.6009 Microsoft (R) Windows (R) 6.00.6002 Service Pack 2 Multiprocessor Free Kernel-Processor-Power.4 Processor 0 exposes the following: 1 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) How can I make this system actually boot up as a multiprocessor machine?

    Read the article

  • How to setup a reliable SMTP server on Windows Server 2008 R2

    - by everwicked
    I know there are SMTP services out there which you can pay to send e-mails with but surely it's not that difficult to set up one of your own. How can I set up an SMTP server on Windows Server 2008 R2 that is: - Secure; only authorized users/hostnames/etc can send mail - Reliable; e-mails don't get lost - Not treated as spam; when e-mails are received from say gmail/outlook/hotmail they don't go straight to junk ** ** I understand this depends both on the server+e-mail headers AND e-mail content - I'm looking to safeguard the server part. Thanks!

    Read the article

  • Windows Server 2008 Antivirus Software with an API

    - by Dave Jellison
    I'm looking for an Antivirus package that is compliant with Windows Server 2008. That's not the hard part. What I need is an API layer on the Antivirus that i can call from managed .net code. For example: I am developing an Asp.Net (C#) website that allows users to upload files to the web server which the web site resides on. We have full control of the server so there are no security/rights issues on the server. I need to be able to run the antivirus algorithm on the newly uploaded files without (hopefully) shelling out to a command-ilne version of the software. Does anyone know of such a package?

    Read the article

  • Server 2008 R2 - Boot disk RAID 1 - migrate to larger disk

    - by William Hooper
    My group inherited several 2008 R2 servers with single 70GB RAID 1 boot/system disks. No other disks in the servers. We need larger boot / system disk. Plan is : to replace one disk with new 500 GB drive wait for resync replace other smaller disk with 2nd 500 GB drive wait for resysnc Now I should have 500 GB RAID 1 with original 70 GB partition Then I would like to extend the 70 GB partition to 200 GB and add D: drive partition with remaining 300 GB Can the above be done using Windows Disk Management and / or Windows DiskPart ?

    Read the article

  • How to fix Windows 2008 R2 BOOTMGR is missing

    - by cyberkiwi
    BOOTMGR IS MISSING PRESS CTRL+ALT+DEL TO RESTART Note: This is a VM on VMWare ESX server, but that should not matter I put in the 2008 R2 x64 install dvd and can get to recovery, but it lists no Operating Systems. Clicking on Next brings me to +=========================== System Recovery Options +=========================== Choose a recovery tool Operating system: Unknown or (Unknown) Local Disk ..... Command Prompt I start the command prompt, go to C:\ and perform a dir /a Apart from files I put there myself, these are showing $Recycle.Bin Documents and Settings [C:\Users] Program Files Program Files (x86) ProgramData Recovery System Volume Information Temp Users Windows Where to go next? Is it like the NTLDR problem with Windows 2003 where I can just drop a file in there and it will be hunky dory again?

    Read the article

  • Forcing users to change password on first login - Windows Server 2008 R2 Remote Desktop Services

    - by George Durzi
    I'm setting up a demo lab environment in which each demo lab user is assigned 4 accounts to use in the lab. Users access the lab via Remote Desktop to the "client" machine in the lab - exposed at demolab.mydomain.com. The Client machine is a Windows 2008 Server R2 Enterprise Edition server The Remote Desktop Services role is configured on this server Remote Connection settings are configured to allow users to connect with any version of the Remote Desktop Client All accounts are members of the local Administrators and Remote Desktop Users groups All accounts are configured to be forced to change the default password after first login The user is instructed to remote into the lab with an account designated as their main account, and establish 3 more remote desktop sessions within the lab using their 3 other assigned demo lab accounts. When establishing the initial remote desktop connection to the lab using their main account, the user sees the change password dialog as expected. However, after logging in and trying to establish remote desktop connections to the server with their three other accounts, they are prompted that they need to change the password after logging in but can't continue with the login process - they don't see the expected change password experience. After logging in with a primary accounts, it doesn't make a difference if I try establishing a Remote Desktop connection to the environment using the name of the server, e.g. Client, or demolab.mydomain.com. I experimented with changing the settings for Remote Connections to require NLA but that didn't make a different. Appreciate any tips. Thanks

    Read the article

  • Can someone correct me about Windows 2008 DFS implementation

    - by cwheeler33
    I have 2 two Windows 2003 file servers using DoubleTake at the moment. They are in an 2003 AD domain. And each server has it's own disk set. It is time to replace the servers... I want to use Windows 2008 64bit Ent. I was thinking of using DFS-R to replace DoubleTake. The part I'm not sure about is clustering. Do I need to have shared storage if each server has a copy of the data? I want to have the data available to the same share name, so maybe I don't fully understand how DFS is set up. I currently have about 6TB of data. I expect to grow by 3TB a year on these file servers. Any resources/books that could teach me would be good to know as well.

    Read the article

  • Windows Server 2008: Terminal Services

    - by JohnyD
    I have a Dell R710 with 72GB of memory running Hyper-V. Within Hyper-V I have a Windows 2008 (32-bit) VM running Terminal Services. How do I allocate memory so that any user who connects to this Terminal Server (from their thin-client) is allocated 2GB (or whatever amount I choose) of memory? Currently I have provisioned the TS with 2GB of memory but it seems that this is shared among all that connect. Please let me know if there is further information I can provide. Thank you.

    Read the article

  • Oracle 10g to SQL server 2008/ migration

    - by vs1984
    We have a reasonably heavy Oracle 10G database (~ 120 GB space occupied). The database consists of tables, packages, materialized views, procedures etc. We are planning to decommission Oracle and migrate to SQL server 2008. Can you provide your experience on this similar exercise? What is the best approach to undertake this exercise? Are there any tools available with Microsoft to implement this? Once SQL server is commissioned, is it possible to connect SQL server to Oracle server in downstream applications?

    Read the article

  • Moving mails from SBS 2008 to SBS 2011

    - by starchx
    we are going to upgrade server from SBS 2008 to a new hardware server with SBS 2011. Due to non-experience in Server Migration (eg, answer file), we have decided to choose Clean Install. We have 12 users so that's not too bad. The most challenge problem is to move over all the emails for each user, some user have 5GB inbox. The one method I know is to login to each user account and export the emails to PST file using Outlook 2007. Then connect to new SBS 2011 and import the PST into new inbox. Do we have any other better/quicker ways? Thanks

    Read the article

  • How to Mirror or Clone a Spanned Volume in Windows 2008

    - by Matt
    I have a spanned volume (3x6+ TB disks spanned to one 20+ TB volume) that I need to mirror or clone to a new 20+ TB (unspanned) volume. Once mirrored or cloned I'm going to destroy the original volume and reuse the storage elsewhere. Windows 2008 will not allow me to mirror it because the original is a spanned volume. I cannot simply copy the data, because there are sparse files on the volume. So the OS thinks there is 150+ TB used on the disk when there really is only around 18TB used physically. When I try to use the copy command it won't run because it thinks the destination volume needs to be 150+ TB to hold it all. A conundrum, but I figure someone here has the answer. Thanks, Matt

    Read the article

  • Password Expired Server 2008 R2

    - by Shaharyar
    Hello everybody, We're facing some trouble with our Server 2008 R2 installation. The passwords expired and we're prompted to change the password. After changing it, we get following error message: Configuration Information could no be read from the domain controller, either because the machine is unavailable, or access has been denied. But we aren't even using a domain controller. So we tried running the server in Safe Mode where we get following message after changing the password: An attempt was made to logon, but the network logon service was not started. Are there any other things I could try? All help is more than appreciated!

    Read the article

  • What is the best way to run ClamAV on Windows Server 2008 R2

    - by gabbsmo
    I'm hosting a Wordpress-site on Windows Server 2008 RS and want to scan all files that are uploaded by users for viruses using this plugin http://wordpress.org/extend/plugins/upload-scanner/. I'm on a really tight budget (no profit) so ClamAV seem like a good choice. What is the best way to run ClamAV under these circumstances? I'm concidering the following options: Just running the raw windows build from http://sourceforge.net/projects/clamav/ an setup definition updates with task scheduler. Any way to automate updates of the scanner (binaries)? Using a "distro" like ClamWin or Immunet (advertised on clamav.net). Any suggestions are welcome.

    Read the article

  • Changing Administrator password on a Windows 2008 web server

    - by Nick
    I've just taken over the administration of a Windows 2008 web server from a previous employee on a temporary basis. I need to change the Admin password as soon as I can but I've noticed that quite a few of the services also run under this account. So: Is there a quick way to find out which services will be affected by me changing the password or is it a question of going down the list? It doesn't seem right to me that the Admin account is used in this manner; should I create a different account for these services, or is using the Admin a/c standard practice? I realize everyone's servers / networks are set up differently, but are there any other items I should be aware of when changing the Admin password? Thanks

    Read the article

  • Windows Server 2008 R2 stuck at System Recovery Options

    - by Magnus
    One of my Windows Server 2008 R2 server has started to go into System Recovery Options at reboot. I have tried to let it go through a System Image Recovery, which it says completes successfully. But after reboot it again wants to do a system recovery. Safe mode doesn't work; it still wants to do a system recovery. Putting in the install DVD trying to do a repair actually brings up the very same System Revoery dialog again. Nothing has changed configuration wise. Any ideas?

    Read the article

  • Password Expired on Server 2008 R2

    - by Shaharyar
    Hello everybody, We're facing some trouble with our Windows Server 2008 R2 installation. The passwords expired and we're prompted to change the password. After changing it, we get following error message: Configuration Information could no be read from the domain controller, either because the machine is unavailable, or access has been denied. But we aren't even using a domain controller. So we tried running the server in Safe Mode where we get following message after changing the password: An attempt was made to logon, but the network logon service was not started. Are there any other things I could try? All help is more than appreciated!

    Read the article

  • SQL Server 2008, not enough disk space

    - by snorlaks
    Hello, I'm executing sql query on my database. I have SQL Server 2008 installed on my D harddrive which has 55 GB free space. I have also C drive which has sth like 150 MB free (right now). While executing that query on quite a big table (16 GB) I have an error: An error occurred while executing batch. Error message is: Not enough disk space. I would like to know if there is any possibility that I can make SQL Server to use D drive instead of C Or maybe there is any other problem with what I'm doing ? Thanks for help

    Read the article

  • Windows 2008 additional disk going offline with reboots on Amazon EC2

    - by Ernest Mueller
    OK, so I took the stock Windows 2008 64-bit Amazon AMI and wanted to add a D: drive for page file space and crash dumps. I launched the instance with a second EBS volume attached as xvdf and went into Disk Management set it online, and added the page file and crash dump settings and all that works. But when I reboot, the box comes back up with that second drive as "Offline." How do I get that disk to automatically come online on reboot (or most notably, when I turn this into an AMI and launch more instances off it - I've tried that too and same deal with the D:).

    Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >