Search Results

Search found 28401 results on 1137 pages for 'network location'.

Page 47/1137 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

  • PASS Summit Location follow up - result analysis

    - by simonsabin
    I've had a chance to look at the results directly and it is clear that there is a tough choice. On the one hand people are saying that they prefer to have PASS put their money into chapters and things like 24hrs of PASS rather than an event on the east coast. Whilst at the same time almost 50% more people said they would be more likely to attend an East Coast event than a Seattle event, and 60% more said they would be more likley to attend a US Central region event. Whats more 60% said that the summit should be outside of Seattle every other year with only 19% saying it should always stay in Seattle. So clearly there is a huge desire for a non Seattle event. Looking at the other reasons for keeping in Seattle and the big one being that people want Microsoft speakers. More people think its somewhat important of very important that the conference is in walking distance of the hotels and restaurants. Essentially the Q6 questions show an even balance for normal conference, highlighting that they are prepared to travel, not with the family and they want a well laid out conference. Whats very annoying is that the questions, as people have commented, were biased towards certain answers. For instance there was no option about whether people feel its important to have industry leading speakers, MVPs etc at the conference. Only questions about Microsoft speakers. I know survey writing is very difficult to avoid biasing the answers one way or another. There was also no choice to show peoples preference, would people prefer Microsoft speakers or the summit to be held on the East Coast/Central US. I also find it amazing that people prefer hundres of developers rather than the SQLCAT and CSS teams, surely that indicates another issue about a lack of understanding of what the these teams do. All in all it is clear that people showed they want an event outside of Seattle and don't want PASS to be putting money into that instead of into other community activites. I find it suprising that there appears to have been a huge weighting against certain questions which have prioritised them over the huge desire for a PASS summit outside of Seattle. Lets see where we will be in 2013 or maybe they will rethink 2012 who knows.

    Read the article

  • Wired connection problem through router

    - by tommypincha
    I'm having trouble to connect my Ubuntu 11.10 to internet through ethernet. I installed a router to get Wi-Fi and now (by a wired connection) I can't have internet with ubuntu (but I can with Windows 7). I see several attempts per minute of the network-manager to get a connection, but after a minute it stops trying. Here are a couple of outputs from key files: cat /etc/network/interfaces auto lo iface lo inet loopback and ifconfig -a eth0 Link encap:Ethernet HWaddr 00:16:76:e4:a6:e8 inet6 addr: fe80::216:76ff:fee4:a6e8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:117 dropped:0 overruns:0 frame:117 TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:12221 (12.2 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:582 errors:0 dropped:0 overruns:0 frame:0 TX packets:582 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:46024 (46.0 KB) TX bytes:46024 (46.0 KB) I tried reconnecting the modem and the router and reconnecting the ethernet cable but nothing... I tried other solutions from other posts (this one has a similar issue Wired connection not working) but again nothing. My IP is dynamic. A couple of things I see and did: I see no inet addr, only inet6. I ignored ipv6 from the internet connections, and restarted the network-manager service and nothing. A difference with the post I mentioned is the RX packets with errors I have, is this a clue of the problem? Any help would be appreciated, Thanks!

    Read the article

  • Updating sprite location with controls

    - by iQue
    So ive got a character in a 2D game using surfaceView that I want to be able to move using a button(eventually a joystick), but my game crashes as soon as I try to move my sprite. This is my onTouch-method for my steering button: public void handleActionDown(int eventX, int eventY) { if (eventX >= (x - bitmap.getWidth() / 2) && (eventX <= (x + bitmap.getWidth()/2))) { if (eventY >= (y - bitmap.getHeight() / 2) && (y <= (y + bitmap.getHeight() / 2))) { setTouched(true); } else { setTouched(false); } } else { setTouched(false); } and if I try to put this in my update-method: public void update() { x += (speed.getXv() * speed.getxDirection()); y += (speed.getYv() * speed.getyDirection()); } the sprite moves on its own just fine, but as soon as I add: public void update() { if(steering.isTouched()){ x += (speed.getXv() * speed.getxDirection()); y += (speed.getYv() * speed.getyDirection()); } the game crashes. Does any1 know why this is or how to fix it? I cannot figure it out. Im using MotionEvent.ACTION_DOWN to check if the user if pressing the screen. }

    Read the article

  • jQuery open and close nested ul nav depending on location

    - by firefusion
    I'm making a sub nav in wordpress and have a nested list style menu. An example of the HTML is below. Whichever is the current item has the li class "current_page_item". I need all child menus collapsed unless there is a current_page_item class on the parent or one of the children. <ul> <li class="current_page_item"><a href="#">Parent Item</a> <ul class="children"> <li><a href="#">Child page</a></li> <li><a href="#">Child page</a></li> <li><a href="#">Child page</a></li> <li><a href="#">Child page</a></li> </ul> </li> <li><a href="#">Parent Item</a> <ul class="children"> <li><a href="#">Child page</a></li> <li><a href="#">Child page</a></li> </ul> </li> <li><a href="#">Parent Item</a> <ul class="children"> <li><a href="#">Child page</a></li> <li><a href="#">Child page</a></li> </ul> </li> <li><a href="#">Parent Item</a></li> <li><a href="#">Parent Item</a></li> </ul> This so far, which works but i wonder if it can be improved as there is some flashing open and then closed again.... jQuery('ul.children').slideUp(); jQuery('li.current_page_item ul.children').slideDown('medium'); jQuery('li.current_page_item').parent().slideDown('medium');

    Read the article

  • Unity3D Android - Move your character to a specific x position

    - by user3666251
    Im making a new game for android and I wanted to move my character (which is a cube for now) to a specific x location (on top of a flying floor/ground thingy) but I've been having some troubles with it.I've been using this script : var jumpSpeed: float = 3.5; var distToGround: float; function Start(){ // get the distance to ground distToGround = collider.bounds.extents.y; } function IsGrounded(): boolean { return Physics.Raycast(transform.position, -Vector3.up, distToGround + 0.1); } function Update () { // Move the object to the right relative to the camera 1 unit/second. transform.Translate(Vector3.forward * Time.deltaTime); if (Input.anyKeyDown && IsGrounded()){ rigidbody.velocity.x = jumpSpeed; } } And this is the result (which is not what I want) : https://www.youtube.com/watch?v=Fj8B6eI4dbE&feature=youtu.be Anyone has any idea how to do this ? Im new in unity and scripting.Im using java btw. Ty.

    Read the article

  • Windows: "net use" equivalent that shows the username used to mount a share?

    - by Jeroen Wiert Pluimers
    Sometimes you need to use different credentials to map different shares, for instance net use z: \\myserver\myshare /user:mydomain\myusername mypassword You can use net use to show you the shares that are mapped, but it does not show the mydomain\myusername. What can I use to show that information? I'm looking for output like this from the imaginary command NetUseX: H:\>NetUseX New connections will be remembered. Status Local Remote Username Network ---------------------------------------------------------------------------------------------------------- OK D: \\MyServer1234\SomeData MyServer1234\MyUserA Microsoft Windows Network Unavailable E: \\MyServer4321\SomeApps MyDomain\MyUserB Microsoft Windows Network OK H: \\MyServer4321\HomeDAta MyDomain\MyUserB Microsoft Windows Network Disconnected W: \\MyServer6789\WorkData MyDomain\MyUserB Microsoft Windows Network OK \\MyServer9876\Shortcuts MyServer9876\MyUserC Microsoft Windows Network The command completed successfully.

    Read the article

  • Ubuntu 12.04 Network Manager: unable to save manual setting to set up a static ip

    - by Andy
    I am fairly familiar with setting up servers, and ubuntu is generally my flavor of choice, but I just installed 12.04 desktop and I am seeing some behavior in network manager that is really puzzling. The network connection works fine if I leave it set on dhcp, but I would like a static IP address for my new web server. When I go into network manager and edit the connection for the one and only NIC I can select MANUAL from the dropdown menu but as soon as I do the Save button becomes greyed out. Even after filling out all fields for the connection it is still grey and I am unable to save the static IP connection information. Any thoughts would be greatly appreciated. I'm hoping there is just some new setting that I am unaware of.... On another note, if I stop the network manager and go edit the interfaces file (and the appropriate hosts/routes/dns files), I do get a static ip address assigned and I can contact my server from the outside, however, the server cannot find the internet. Can't ping even its own ip... I can ping the loopback interface though. I'm really confused on this one. Hoping someone can offer some help.

    Read the article

  • New Blog Location

    - by Kelly Cassidy
    It's been almost 4 years since I last logged into this site, but when I search my name I still rank high for people searching for me! I didn't realize I was so popular!Well, I've obviously since abandonded this blog and don't really want to maintain a blog in 2 locations now that I am getting back into it. (At least, not at this time - if I can figure out how to cross-post things may change...) I can instead be found at http://mindfulsanity.com where I have posted more frequently in the last few months on a few things web and other experiences and will continue to do so. I hope to do 2 posts per week, time permitting, and topic permitting. Enjoy!

    Read the article

  • Predicted target location

    - by user3256944
    I'm having an issue with calculating the predicted linear angle a projectile needs to move in to intersect a moving enemy ship for my 2D game. I've tried following the document here, but what I've have come up with is simply awful. protected Vector2 GetPredictedPosition(float angleToEnemy, ShipCompartment origin, ShipCompartment target) { // Below obviously won't compile (document wants a Vector, not sure how to get that from a single float?) Vector2 velocity = target.Thrust - 25f; // Closing velocity (25 is example projectile velocity) Vector2 distance = target.Position - origin.Position; // Range to close double time = distance.Length() / velocity.Length(); // Time // Garbage code, doesn't compile, this method is incorrect return target.Position + (target.Thrust * time); } I would be grateful if the community can help point out how this is done correctly.

    Read the article

  • Cannot connect to wireless network

    - by smr
    I am quite new to using Ubuntu 12.10. All I remember while installing Ubuntu 12.10 was that I didn't check any box specifically to enable wireless connectivity. I tried looking into the various questions posted here - most of them refer to certain commands (redundantly sudo) and things of that sort. I am quite new and wasn't sure of understanding what those commands were trying to do (the network configuration settings - showed up different options, like 'Wireless', 'Wired', 'IPv4', 'IPv6' etc -- I am not sure of what sort of settings are to be made - like for example what sort of 'WEP' settings etc are to be made. Although I wasn't able to connect to the wireless network, I was able to connect to the internet, once I plugged in the ethernet cable. Can someone help me with: 1) Understandng a way to see if Ubuntu is configured to connect to a wireless network. 2) If so - Getting to configure to a wireless network (setting up a new one). 3) Where in ubuntu, should I look for seeing if there are any hardware devices (such as the Broadcom wireless adapter or things of that sort - like the way we use the 'Device manager' in Windows to look into the adapter settings). 4) Reference material to learn and understand the various ubuntu commands. (things like the -lshw etc).

    Read the article

  • how do you find a file's location?

    - by home-directory
    Noob here. OK, I 1 Open the Dash. 2 Type "file". An app appears, called "files", icon looks like ta 2-drawer file cabinet. I click that, the app opens 3: I click the "Search button". I type the file name in the box and hit Enter. 4: The program thinks for a while, then displays a result. Great! the program found the file I was ilooking for! IT knows where myfile.foo is, BUT I DON'T! IT DOESN'T F%*%#ING SAY WHERE IT IS!!!! How do I find out where it is, please? I hate to say this, but is there an app that works like Windows Explorer (but doesn't crash every 2 minutes)?

    Read the article

  • PASS Summit Location Redux

    - by andyleonard
    Introduction To quote Ronald Reagan, " There you go again ." The Professional Association for SQL Server (PASS) is considering locations for future PASS Summits. The apparent answer is: You Can Have The Summit Anywhere You Want... ... as long as it's in Seattle. PASS conducted a survey on this about a year ago, and I commented on the results and PASS' (mis-)interpretation of said results in a post entitled On PASS Summit Locations, Time Will Tell . "It's About Community" I think every member of the...(read more)

    Read the article

  • Geographic location settings

    - by JochemTheSchoolKid
    I am building an website. It has an .nl domain. Now only my domain is showing up on google.nl I hope I can change this somehow that it could be findable in all google's (like google.com / co.uk) and so on. If I look on google forums. They say go to webmaster tools and change your geographic position over there. But I have added this site and I am not able to change it there because there is no select box. I dont have any idea were to search (yes I searched on google offcourse) or where to ask for this special problem. So maybe here can someone redirect me or explain me what is possible and what not. The question is can I make an .nl domain findable in (almost) all google search sites? And so on how can I do that. Picture of my google webmaster tools (nl): http://i.stack.imgur.com/ZuP4L.png

    Read the article

  • Update GRUB to reflect changed partition location

    - by soandos
    I currently have 3 partitions: Windows, Ubuntu, and swap. I want to move my windows partition by about 20GB. When I try to do this in GParted, it tells me that this will mess up GRUB, and that there is a page that can resolve these issues. However, this page does not actually mention my issue. I am not moving my boot partition (Ubuntu). How can I force GRUB to look for operating systems that are on the drive? I know that this is possible, because when Ubuntu was installed it found Windows without any issues. Additionally, if I create a copy of a partition, how can I add that to GRUB (I assume it will be the same command as above, but if not, what would it be)? Note: OS prober is mentioned here but it doest not list how to use it, or where to find it.

    Read the article

  • Location Change Salary Differences [closed]

    - by GameDev
    DISCLAIMER: I know that this might be a "regional" question but I'm also asking for help as far as what resources to use to determine my decision. I'm currently talking to a recruiter for a game developer in the SF Bay area. I work in a relatively low-cost area in the south. I really want to get into game development but my current career is general web development. I'm very interested in taking the job, but my concern is that the amount they're willing to pay might be a relative pay cut. Here are some factors: It's not an entry-level position, the title is Senior Software Engineer. I have 5+ years of experience. The calculators online tell me that I should be expecting around 2x my current pay rate(http://www.bestplaces.net/col/). My current pay is in the mid $60k/yr, so that's like 120-130k. The recruiter told me at my experience level I can expect about $90-100/yr, and that those cost of living calculators were way off. The benefits will definitely be better, it's much larger company (help with commuting, catered meals, etc). But is the recruiter trying to give me a snow job on the pay scale, or is that a reasonable change from a smallish town in the south to somewhere in the SF bay area? How can I find this out? Glassdoor and Payscale seem to say "senior software developers" in that area make around 110 in median salary, but Payscale says it's closer to $135k, that range seems pretty large.

    Read the article

  • lshw not showing network

    - by triunenature
    Output: {User}@{Computer}:~$ sudo lshw -class network {User}@{Computer}:~$ Another Test: {User}@{Computer}:~$ lspci 00:00.0 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3) 00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3) 00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2) <<---- Network Card???? 00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 (rev 70) 02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500 GT] (rev a1) If you look at 00:07.0 I believe that is the network card. However lshw doesnt show it. I mainly need information on network speed 10MBpS/100MBsP/1000MBpS Though knowing why my system isn't working would be nice.

    Read the article

  • How to "undo" (revert) Ctrl+L?

    - by zharvey
    I'm on 12.04 Desktop. When browsing the file system, it's convenient to type Ctrl+L so as to get the file path "Location" to render as a string; I can then modify the file path or even paste something in and get redirected right where I want to go. But often, after typing Ctrl+L, I find myself wanting to revert back to the normal way Nautilus renders the file path (as a series of buttons/links). What's the magical shortcut to "undo" Ctrl+L and go back to "normal mode"? Thanks in advance!

    Read the article

  • 3D Location Handling

    - by tgrosinger
    I am thinking about making a simulator type game that will involve having lots of small objects in a 3D space. What is the typical solution for handling these objects? The first thing that comes to mind is a 3D Array, but I can't help but think there is a more efficient solution. Another idea that comes to mind is objects having possession of smaller items. For example a House possesses a Table which possesses a Cup and Bowl. The final way I can think of handling this is just having an array of "objects" that each have an x, y, z value. While this would make storing them easy I do not understand how you would detect collisions without just looking at every possible object and checking to see if it is in the way. Are there other ways of holding onto these objects that is more efficient?

    Read the article

  • Variable for the suffix of $request_uri that didn't match the location block prefix

    - by hsivonen
    Suppose I want to move an /images/ directory to an images host so that what was before http://example.org/images/foo.png becomes http://images.example.org/foo.png. If I do: location /images/ { return 301 http://images.example.org$request_uri; }, the result is a redirect to http://images.example.org/images/foo.png which isn't what I want. An older question has an answer that suggests using a regexp location, but that seems like an overkill. Is there really no way to refer to $request_uri with the location prefix chopped off without using regular expressions? Seems like an obvious feature to have.

    Read the article

  • NGINX Document Location

    - by GLaDOS
    I want to be able to access a given url, example.com/str. The problem is that the php file that I want to connect to is in a directory of /str/public/. In my nginx logs, I see that it is trying to connect to /str/public/str/index.php. Is there any way to remove that last 'str' in the document request? Below is my location directive in sites-available/default: location /str { root /usr/share/nginx/html/str/public/; index index.php index.html index.htm; location ~ ^/str/(.+\.php)$ { try_files $uri = 404; root /usr/share/nginx/html/str/public/; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } Thank you all so much in advance.

    Read the article

  • Emit Knowledge - social network for knowledge sharing

    - by hajan
    Emit Knowledge, as the words refer - it's a social network for emitting / sharing knowledge from users by users. Those who can benefit the most out of this network is perhaps all of YOU who have something to share with others and contribute to the knowledge world. I've been closely communicating with the core team of this very, very interesting, brand new social network (with specific purpose!) about the concept, idea and the vision they have for their product and I can say with a lot of confidence that this network has real potential to become something from which we will all benefit. I won't speak much about that and would prefer to give you link and try it yourself - http://www.emitknowledge.com Mainly, through the past few months I've been testing this network and it is getting improved all the time. The user experience is great, you can easily find out what you need and it follows some known patterns that are common for all social networks. They have some real good ideas and plans that are already under development for the next updates of their product. You can do micro blogging or you can do regular normal blogging… it’s up to you, and the way it works, it is seamless. Here is a short Question and Answers (QA) interview I made with the lead of the team, Marijan Nikolovski: 1. Can you please explain us briefly, what is Emit Knowledge? Emit Knowledge is a brand new knowledge based social network, delivering quality content from users to users. We believe that people’s knowledge, experience and professional thoughts compose quality content, worth sharing among millions around the world. Therefore, we created the platform that matches people’s need to share and gain knowledge in the most suitable and comfortable way. Easy to work with, Emit Knowledge lets you to smoothly craft and emit knowledge around the globe. 2. How 'old' is Emit Knowledge? In hamster’s years we are almost five years old start-up :). Just kidding. We’ve released our public beta about three months ago. Our official release date is 27 of June 2012. 3. How did you come up with this idea? Everything started from a simple idea to solve a complex problem. We’ve seen that the social web has become polluted with data and is on the right track to lose its base principles – socialization and common cause. That was our start point. We’ve gathered the team, drew some sketches and started to mind map the idea. After several idea refactoring’s Emit Knowledge was born. 4. Is there any competition out there in the market? Currently we don't have any competitors that share the same cause. What makes our platform different is the ideology that our product promotes and the functionalities that our platform offers for easy socialization based on interests and knowledge sharing. 5. What are the main technologies used to build Emit Knowledge? Emit Knowledge was built on a heterogeneous pallet of technologies. Currently, we have four of separation: UI – Built on ASP.NET MVC3 and Knockout.js; Messaging infrastructure – Build on top of RabbitMQ; Background services – Our in-house solution for job distribution, orchestration and processing; Data storage – Build on top of MongoDB; What are the main reasons you've chosen ASP.NET MVC? Since all of our team members are .NET engineers, the decision was very natural. ASP.NET MVC is the only Microsoft web stack that sticks to the HTTP behavioral standards. It is easy to work with, have a tiny learning curve and everyone who is familiar with the HTTP will understand its architecture and convention without any difficulties. 6. What are the main reasons for choosing ASP.NET MVC? Since all of our team members are .NET engineers, the decision was very natural. ASP.NET MVC is the only Microsoft web stack that sticks to the HTTP behavioral standards. It is easy to work with, have a tiny learning curve and everyone who is familiar with the HTTP will understand its architecture and convention without any difficulties. 7. Did you use some of the latest Microsoft technologies? If yes, which ones? Yes, we like to rock the cutting edge tech house. Currently we are using Microsoft’s latest technologies like ASP.NET MVC, Web API (work in progress) and the best for the last; we are utilizing Windows Azure IaaS to the bone. 8. Can you please tell us shortly, what would be the benefit of regular bloggers in other blogging platforms to join Emit Knowledge? Well, unless you are some of the smoking ace gurus whose blogs are followed by a large number of users, our platform offers knowledge based segregated community equipped with tools that will enable both current and future users to expand their relations and to self-promote in the community based on their activity and knowledge sharing. 10. I see you are working very intensively and there is already integration with some third-party services to make the process of sharing and emitting knowledge easier, which services did you integrate until now and what do you plan do to next? We have “reemit” functionality for internal sharing and we also support external services like: Twitter; LinkedIn; Facebook; For the regular bloggers we have an extra cream, Windows Live Writer support for easy blog posts emitting. 11. What should we expect next? Currently, we are working on a new fancy community feature. This means that we are going to support user groups to be formed. So for all existing communities and user groups out there, wait us a little bit, we are coming for rescue :). One of the top next features they are developing is the Community Feature. It means, if you have your own User Group, Community Group or any other Group on which you and your users are mostly blogging or sharing (emitting) knowledge in various ways, Emit Knowledge as a platform will help you have everything you need to promote your group, make new followers and host all the necessary stuff that you have had need of. I would invite you to try the network and start sharing knowledge in a way that will help you gather new followers and spread your knowledge faster, easier and in a more efficient way! Let’s Emit Knowledge!

    Read the article

  • Finding the Geo-location on a Blackberry?

    - by Frederico
    I'm running into an issue when trying to geolocate users whom are using blackberry devices. Currently there are a few checks that I go through to geolocate the individual the first, using the navigator paramater inside browsers. if(navigator.geolocation) if this fails then I have a backup using a free service (for testing) from maxmind: See Here Yet this doesn't return back the city at all either. I've then tried using the JSPI that google maps proviedes, and echoing out the google.loader.ClientLocation: if (google.loader.ClientLocation != null) { document.write("Your Location Is: " + google.loader.ClientLocation.address.city + ", " + google.loader.ClientLocation.address.region + " lat: " + google.loader.ClientLocation.latitude + " Long: " + google.loader.ClientLocation.longitude); } else { document.write("Your Location Was Not Detected By Google Loader"); } When this didn't work I tried following the google maps 3.0 detect location seen here: Detecting Location I've done all this after seeing this work correctly in google latitude.. so I know there has to be a way to get the location... any thoughts, ideas on what I could possibly try? Thank you kindly

    Read the article

  • Open ports in Windows 7, firewall, public network, port 445

    - by chris
    I selected "public network" in Windows 7. Windows is listening on TCP port 445: TCP 0.0.0.0:445 WIN7TEST:0 ABHÖREN The corresponding incoming firewall rule isn't activated (4th column): When I choose "workplace network" the SMB incoming port 445 rule is still disabled in the advanced windows firewall configuration. I thought "public network" / "workplace network" and so on is influencing the windows firewall rules!? Where's the difference between workplace and public network then? http://www.abload.de/image.php?img=winfire2nxku0.png

    Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >