Search Results

Search found 2739 results on 110 pages for 'reader'.

Page 47/110 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• Sd card bigger than 2gb is not recognized in ubuntu 12.04

  - by dex1

  When I insert a card up to 2gb it is immediately seen by the system but if try it with bigger one it's not seen. I presume the issue is not due to the card reader itself as it reads all cards under windows 7 but due to linux driver. I could see some people having similar issues but no solution. Any help appreciated. GParted doesnt see cards bigger than 2gb. After insertion small card ubuntu@ubuntu:~$ dmesg [10169.384481] mmc0: new SD card at address a95c [10169.384870] mmcblk0: mmc0:a95c SD016 14.0 MiB [10169.386715] mmcblk0: p1 everything worked fine then I removed the small one and put 8gb, waited for 2min [10295.736422] mmc0: card a95c removed [10362.448383] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10372.480076] mmc0: Timeout waiting for hardware interrupt. [10382.496146] mmc0: Timeout waiting for hardware interrupt. [10392.512149] mmc0: Timeout waiting for hardware interrupt. [10402.528145] mmc0: Timeout waiting for hardware interrupt. [10402.529267] mmc0: error -110 whilst initialising SD card [10402.748807] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10412.768063] mmc0: Timeout waiting for hardware interrupt. [10422.784051] mmc0: Timeout waiting for hardware interrupt. [10432.800076] mmc0: Timeout waiting for hardware interrupt. [10442.816067] mmc0: Timeout waiting for hardware interrupt. [10442.817165] mmc0: error -110 whilst initialising SD card [10443.040805] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10453.056145] mmc0: Timeout waiting for hardware interrupt. [10463.072139] mmc0: Timeout waiting for hardware interrupt. [10473.088050] mmc0: Timeout waiting for hardware interrupt. [10483.104046] mmc0: Timeout waiting for hardware interrupt. [10483.104107] mmc0: error -110 whilst initialising SD card [10483.328960] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10493.344144] mmc0: Timeout waiting for hardware interrupt. ubuntu@ubuntu:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03) 00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8072 PCI-E Gigabit Ethernet Controller (rev 16) 0a:01.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 0a:01.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) 0a:01.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) Same cards, same machine (same reader) only different OS(win7) work flawlessly. Some interesting reading I came across but is Chinese for me http://www.mail-archive.com/[email protected]/msg14598.html and another bit http://article.gmane.org/gmane.linux.kernel.mmc/11973/match=sd+card+not+recognized

  Read the article

• A .NET Developers day with the iPad.

  - by mbcrump

  The Apple iPad is currently getting a lot of buzz because of the app store, the book store and of course iTunes. I had the chance to play with one and this is what I have learned about the device. Let’s get this out of the way first, the iPad is awesome. It is the device for media consumption and casual web browsing. But how does it measure up to those of us with .NET on our brains all days. Let’s find out… Main Screen – you can customize everything on this page. I guess I should replace that image with a C# or VS logo. Its pretty standard stuff if you have an iPhone.   Programming Books If you have a subscription to Safari Books Online, then you are in luck, its very easy to read the books on the iPad. Just fire up Safari web browser and goto the Safari Books Online. The biggest benefit that I can see with the iPad is the ability to read books wherever and not have to worry about purchasing books that I already have the .PDF for. Below is a sample from Code Complete 2nd Edition. Below is a PDF of the ECMA-334 C# Language Specification. As you can see its very readable and you should have no problem reading actual code.   Example of Code shown below: It is however easier to read the PDF and store them with a 3rd party PDF reader. I have seen several for .99 cents or less. You can however switch the screen to vertical to get more viewing space as shown below: I was disappointed with the iBooks application. I could not find a single .NET programming book anywhere. I was able to download the excellent sci-fi book “A memory of Wind” for free though. If I just overlooked them, then please email me with the names and titles. I couldn’t even find a technology category in the categories list. Web Surfing – Technical Sites Below is an example of my site in Safari. The code is very readable and the experience was identical to viewing it in Firefox. I tried multiple programming site and the pages looked great except those that used flash and of course it did not display on those pages.   News Apps - Technical Content The standard NY Times and USA Today looked great, but the Technical Content was lacking. It would probably be better to use Google Reader for online technical news.     YouTube Videos – Technical Content  Since its YouTube, we already know that a lot of technical content exist and it plays great on the iPad. I watched several programming videos and could clearly see the code being written. Taking Technical Notes The iPad comes with a great notepad for taking notes. I found that it was easy to take notes regarding projects that I am currently working on.   Calendar The calendar that ships with the iPad is great for organizing. You can setup exchange server or manually enter the information. Pretty standard stuff.    Random Applications that I like: TweetDeck.   and Adobe Ideas. Adobe Ideas is kinda like SketchFlow except you use your finger to mock up the sketches.  Don’t forget that the iPad is great for any type of podcasting. That pretty much sums it up, I would definitely recommend this device as it will only get better. I believe the iOS4 comes out on the 24th and the iPad will only get more and more apps. You could save a few bucks by waiting for the 2nd generation, but that’s a call that only you can make.

  Read the article

• Common Access Card (CAC) Authentication Using Java

  - by Paul

  I'm bascially looking for someplace to start learning how to interface with a government CAC card using java. Ultimately, my goal is to find out how to use CAC card authentication (by PIN number) to authorize access to a website hosted using a Tomcat/J2EE server. But I'll need somewhere to start. So I figure I'd start by writing a small java program to simply read the CAC card information from the CAC card which is inserted into a card reader on my keyboard (DELL keyboard with CAC reader above the numeric keypad). By searching google, I found the cacard java project (https://cacard.dev.java.net/) which was replaced by the OpenSSO project. But I can't seem to find sample code of how to use it to connect to a card, read from a card, etc. Does anyone know where I can find some sample code so that I can start learning how to interact with a CAC card using java? Thanks EDIT: After researching more, I was thinking, would I be able to just set clientAuth="true" in the connector element in the server.xml file? http://tomcat.apache.org/tomcat-6.0-doc/ssl-howto.html clientAuth: Set this value to true if you want Tomcat to require all SSL clients to present a client Certificate in order to use this socket.

  Read the article

• XmlSerializer Deserialize failures

  - by smvlad

  I have wsdl from third party server. Method that i'm interested in returns XmlNode. My thought was wrap web methods and use XmlSerializer to return strongly typed objects. Returned xml looks like this (i removed soap headers): <Response xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ResponseExt" xmlns="http://www.thirdparty.com/lr/"> <Code>0</Code> <Message>SUCCESS</Message> <SessionId>session_token</SessionId> </Response> Looked simple. Created a class: [XmlRoot("Response")] public class MyClass { public string Code {get; set;} public string Message {get; set;} public string SessionId {get; set;} } Processing time: //XmlNode node = xml from above XmlSerializer serializer = new XmlSerializer(typeof(MyClass)); XmlNodeReader reader = new XmlNodeReader(node); Myclass myclass = serializer.Deserialize(reader) as MyClass Last line is where it blows up with inner exception message: The specified type was not recognized: name='ResponseExt', namespace='http://www.thirdparty.com/lr/', at . I can't figure out how to make Serializer happy and what exactly these two mean xsi:type="ResponseExt" xmlns="http://www.thirdparty.com/lr/ As always any advice and pointer are appreciated

  Read the article

• c# WebRequest to connect to wikipedia API

  - by NickJ

  Hey, This may be a pathetically simple problem but I cannot seem to format the post webrequest/response to get data from the wikipedia api. I have posted my code below if anyone can help me see my problem. string pgTitle = txtPageTitle.Text; Uri address = new Uri("http://en.wikipedia.org/w/api.php"); HttpWebRequest request = WebRequest.Create(address) as HttpWebRequest; request.Method = "POST"; request.ContentType = "application/x-www-form-urlencoded"; string action = "query"; string query = pgTitle; StringBuilder data = new StringBuilder(); data.Append("action=" + HttpUtility.UrlEncode(action)); data.Append("&query=" + HttpUtility.UrlEncode(query)); byte[] byteData = UTF8Encoding.UTF8.GetBytes(data.ToString()); request.ContentLength = byteData.Length; using (Stream postStream = request.GetRequestStream()) { postStream.Write(byteData, 0, byteData.Length); } using (HttpWebResponse response = request.GetResponse() as HttpWebResponse) { // Get the response stream StreamReader reader = new StreamReader(response.GetResponseStream()); divWikiData.InnerText = reader.ReadToEnd(); }

  Read the article

• how to pass the parameters to the urlconnection in java/android?

  - by androidbase

  hi all, i can establish a connection using HttpUrlConnection. my code below. client = new DefaultHttpClient(); URL action_url = new URL(actionUrl); conn = (HttpURLConnection) action_url.openConnection(); conn.setDoOutput(true); conn.setDoInput(true); conn.setRequestProperty("domain", "bschool.hbs.edu"); conn.setRequestProperty("userType", "2"); conn.setRequestProperty("referer", "http://www.alumni.hbs.edu/"); conn.setRequestProperty("Content-Type", "application/x-www-form-urlencoded"); conn.setRequestMethod(HttpPost.METHOD_NAME); DataOutputStream ds = new DataOutputStream(conn.getOutputStream()); String content = "username=username1&password=password11"; Log.v(TAG, "content: " + content); ds.writeBytes(content); ds.flush(); ds.close(); InputStream in = conn.getInputStream();//**getting filenotfound exception here.** BufferedReader reader = new BufferedReader( new InputStreamReader(in)); StringBuilder str1 = new StringBuilder(); String line = null; while ((line = reader.readLine()) != null) { str1.append(line); Log.v(TAG, "line:" + line); } in.close(); s = str1.toString(); getting filenotfound exception. dont know why? else give me some suggestion to pass username and passwrod parameter to the url by code..

  Read the article

• c# How to Verify Signature, Loading PUBLIC KEY From PEM file?

  - by bbirtle

  I'm posting this in the hope it saves somebody else the hours I lost on this really stupid problem involving converting formats of public keys. If anybody sees a simpler solution or a problem, please let me know! The eCommerce system I'm using sends me some data along with a signature. They also give me their public key in .pem format. The .pem file looks like this: -----BEGIN PUBLIC KEY----- MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDe+hkicNP7ROHUssGNtHwiT2Ew HFrSk/qwrcq8v5metRtTTFPE/nmzSkRnTs3GMpi57rBdxBBJW5W9cpNyGUh0jNXc VrOSClpD5Ri2hER/GcNrxVRP7RlWOqB1C03q4QYmwjHZ+zlM4OUhCCAtSWflB4wC Ka1g88CjFwRw/PB9kwIDAQAB -----END PUBLIC KEY----- Here's the magic code to turn the above into an "RSACryptoServiceProvider" which is capable of verifying the signature. Uses the BouncyCastle library, since .NET apparently (and appallingly cannot do it without some major headaches involving certificate files): RSACryptoServiceProvider thingee; using (var reader = File.OpenText(@"c:\pemfile.pem")) { var x = new PemReader(reader); var y = (RsaKeyParameters)x.ReadObject(); thingee = (RSACryptoServiceProvider)RSACryptoServiceProvider.Create(); var pa = new RSAParameters(); pa.Modulus = y.Modulus.ToByteArray(); pa.Exponent = y.Exponent.ToByteArray(); thingee.ImportParameters(pa); } And then the code to actually verify the signature: var signature = ... //reads from the packet sent by the eCommerce system var data = ... //reads from the packet sent by the eCommerce system var sha = new SHA1CryptoServiceProvider(); byte[] hash = sha.ComputeHash(Encoding.ASCII.GetBytes(data)); byte[] bSignature = Convert.FromBase64String(signature); ///Verify signature, FINALLY: var hasValidSig = thingee.VerifyHash(hash, CryptoConfig.MapNameToOID("SHA1"), bSignature);

  Read the article

• DataContractSerializer does not properly deserialize, values for methods in object are missing

  - by sachin

  My SomeClass [Serializable] [DataContract(Namespace = "")] public class SomeClass { [DataMember] public string FirstName { get; set; } [DataMember] public string LastName { get; set; } [DataMember] private IDictionary<long, string> customValues; public IDictionary<long, string> CustomValues { get { return customValues; } set { customValues = value; } } } My XML File: <?xml version="1.0" encoding="UTF-8"?> <SomeClass> <FirstName>John</FirstName> <LastName>Smith</LastName> <CustomValues> <Value1>One</Value1> <Value2>Two</Value2> </CustomValues > </SomeClass> But my problem is for the class, i am only getting some of the data for my methods when i deserialize. var xmlRoot = XElement.Load(new StreamReader( filterContext.HttpContext.Request.InputStream, filterContext.HttpContext.Request.ContentEncoding)); XmlDictionaryReader reader = XmlDictionaryReader.CreateDictionaryReader(xmlRoot.CreateReader()); DataContractSerializer ser = new DataContractSerializer(typeof(SomeClass)); //Deserialize the data and read it from the instance. SomeClass someClass = (SomeClass)ser.ReadObject(reader, true); So when I check "someClass", FirstName will have the value john, But the LastName will be null. Mystery is how can i get some of the data and not all of the data for the class. So DataContractSerializer is not pulling up all the data from xml when deserializing. Am i doing something wrong. Any help is appreciated. Thanks in advance. Let me know if anyone has the same problem or any one has solution

  Read the article

• C# code to GZip and upload a string to Amazon S3

  - by BigJoe714

  Hello. I currently use the following code to retrieve and decompress string data from Amazon C#: GetObjectRequest getObjectRequest = new GetObjectRequest().WithBucketName(bucketName).WithKey(key); using (S3Response getObjectResponse = client.GetObject(getObjectRequest)) { using (Stream s = getObjectResponse.ResponseStream) { using (GZipStream gzipStream = new GZipStream(s, CompressionMode.Decompress)) { StreamReader Reader = new StreamReader(gzipStream, Encoding.Default); string Html = Reader.ReadToEnd(); parseFile(Html); } } } I want to reverse this code so that I can compress and upload string data to S3 without being written to disk. I tried the following, but I am getting an Exception: using (AmazonS3 client = Amazon.AWSClientFactory.CreateAmazonS3Client(AWSAccessKeyID, AWSSecretAccessKeyID)) { string awsPath = AWSS3PrefixPath + "/" + keyName+ ".htm.gz"; byte[] buffer = Encoding.UTF8.GetBytes(content); using (MemoryStream ms = new MemoryStream()) { using (GZipStream zip = new GZipStream(ms, CompressionMode.Compress)) { zip.Write(buffer, 0, buffer.Length); PutObjectRequest request = new PutObjectRequest(); request.InputStream = ms; request.Key = awsPath; request.BucketName = AWSS3BuckenName; using (S3Response putResponse = client.PutObject(request)) { //process response } } } } The exception I am getting is: Cannot access a closed Stream. What am I doing wrong?

  Read the article

• How Can I tell where log4net thinks it's getting it's config file from?

  - by Mike

  Hi, I have the following log from the log4net debug log: log4net: DefaultRepositorySelector: repository [log4net-default-repository] already exists, using repository type [log4net.Repository.Hierarchy.Hierarchy] log4net: XmlConfigurator: configuring repository [log4net-default-repository] using file [log4net.config] watching for file updates log4net: XmlConfigurator: configuring repository [log4net-default-repository] using file [log4net.config] log4net: XmlConfigurator: configuring repository [log4net-default-repository] using stream log4net:ERROR XmlConfigurator: Error while loading XML configuration System.Xml.XmlException: ' ' is an unexpected token. The expected token is ''. Line 7, position 184. at System.Xml.XmlTextReaderImpl.Throw(Exception e) at System.Xml.XmlTextReaderImpl.Throw(String res, String[] args) at System.Xml.XmlTextReaderImpl.ThrowUnexpectedToken(String expectedToken1, String expectedToken2) at System.Xml.XmlTextReaderImpl.ThrowUnexpectedToken(Int32 pos, String expectedToken1, String expectedToken2) at System.Xml.XmlTextReaderImpl.ParseAttributes() at System.Xml.XmlTextReaderImpl.ParseElement() at System.Xml.XmlTextReaderImpl.ParseElementContent() at System.Xml.XmlTextReaderImpl.Read() at System.Xml.XmlTextReader.Read() at System.Xml.XmlValidatingReaderImpl.Read() at System.Xml.XmlValidatingReader.Read() at System.Xml.XmlLoader.LoadNode(Boolean skipOverWhitespace) at System.Xml.XmlLoader.LoadDocSequence(XmlDocument parentDoc) at System.Xml.XmlLoader.Load(XmlDocument doc, XmlReader reader, Boolean preserveWhitespace) at System.Xml.XmlDocument.Load(XmlReader reader) at log4net.Config.XmlConfigurator.Configure(ILoggerRepository repository, Stream configStream) The only problem is, I have no idea where it thinks it's getting this log4net.config file, since in my AssemblyInfo.cs I have defined it to be: [assembly: log4net.Config.XmlConfigurator(ConfigFile = "api4net.config", Watch = true)] Is there an easy way to determine where log4net is loading this mystical log4net.config that has some xml errors?

  Read the article

• Read binary file into a struct C#

  - by Robert Höglund

  I'm trying to read binary data using C#. I have all information about the layout of the data in the files I want to read. I'm able to read the data "chunk by chunk", i.e. getting the first 40 bytes of data converting it to a string, get the next 40 bytes, ... Since there are at least three slighlty different version of the data, I would like to read the data directly into a struct. It just feels so much more right than by reading it "line by line". I have tried the following approach but to no avail:StructType aStruct; int count = Marshal.SizeOf(typeof(StructType)); byte[] readBuffer = new byte[count]; BinaryReader reader = new BinaryReader(stream); readBuffer = reader.ReadBytes(count); GCHandle handle = GCHandle.Alloc(readBuffer, GCHandleType.Pinned); aStruct = (StructType) Marshal.PtrToStructure(handle.AddrOfPinnedObject(), typeof(StructType)); handle.Free(); The stream is an opened FileStream from which I have began to read from. I get an AccessViolationException when using Marshal.PtrToStructure. The stream contains more information than I'm trying to read since I'm not interested in data at the end of the file. The struct is defined like:[StructLayout(LayoutKind.Explicit)] struct StructType { [FieldOffset(0)] public string FileDate; [FieldOffset(8)] public string FileTime; [FieldOffset(16)] public int Id1; [FieldOffset(20)] public string Id2; } The examples code is changed from original to make this question shorter. How would I read binary data from a file into a struct?

  Read the article

• process csv in scala

  - by portoalet

  I am using scala 2.7.7, and wanted to parse CSV file and store the data in SQLite database. I ended up using OpenCSV java library to parse the CSV file, and using sqlitejdbc library. Using these java libraries makes my scala code looks almost identical to that of Java code (sans semicolon and with val/var) As I am dealing with java objects, I can't use scala list, map, etc, unless I do scala2java conversion or upgrade to scala 2.8 Is there a way I can simplify my code further using scala bits that I don't know? val filename = "file.csv"; val reader = new CSVReader(new FileReader(filename)) var aLine = new Array[String](10) var lastSymbol = "" while( (aLine = reader.readNext()) != null ) { if( aLine != null ) { val symbol = aLine(0) if( !symbol.equals(lastSymbol)) { try { val rs = stat.executeQuery("select name from sqlite_master where name='" + symbol + "';" ) if( !rs.next() ) { stat.executeUpdate("drop table if exists '" + symbol + "';") stat.executeUpdate("create table '" + symbol + "' (symbol,data,open,high,low,close,vol);") } } catch { case sqle : java.sql.SQLException => println(sqle) } lastSymbol = symbol } val prep = conn.prepareStatement("insert into '" + symbol + "' values (?,?,?,?,?,?,?);") prep.setString(1, aLine(0)) //symbol prep.setString(2, aLine(1)) //date prep.setString(3, aLine(2)) //open prep.setString(4, aLine(3)) //high prep.setString(5, aLine(4)) //low prep.setString(6, aLine(5)) //close prep.setString(7, aLine(6)) //vol prep.addBatch() prep.executeBatch() } } conn.close()

  Read the article

• Render view to string followed by redirect results in exception

  - by Chris Charabaruk

  So here's the issue: I'm building e-mails to be sent by my application by rendering full view pages to strings and sending them. This works without any problem so long as I'm not redirecting to another URL on the site afterwards. Whenever I try, I get "System.Web.HttpException: Cannot redirect after HTTP headers have been sent." I believe the problem comes from the fact I'm reusing the context from the controller action where the call for creating the e-mail comes from. More specifically, the HttpResponse from the context. Unfortunately, I can't create a new HttpResponse that makes use of HttpWriter because the constructor of that class is unreachable, and using any other class derived from TextWriter causes response.Flush() to throw an exception, itself. Does anyone have a solution for this? public static string RenderViewToString( ControllerContext controllerContext, string viewPath, string masterPath, ViewDataDictionary viewData, TempDataDictionary tempData) { Stream filter = null; ViewPage viewPage = new ViewPage(); //Right, create our view viewPage.ViewContext = new ViewContext(controllerContext, new WebFormView(viewPath, masterPath), viewData, tempData); //Get the response context, flush it and get the response filter. var response = viewPage.ViewContext.HttpContext.Response; //var response = new HttpResponseWrapper(new HttpResponse // (**TextWriter Goes Here**)); response.Flush(); var oldFilter = response.Filter; try { //Put a new filter into the response filter = new MemoryStream(); response.Filter = filter; //Now render the view into the memorystream and flush the response viewPage.ViewContext.View.Render(viewPage.ViewContext, viewPage.ViewContext.HttpContext.Response.Output); response.Flush(); //Now read the rendered view. filter.Position = 0; var reader = new StreamReader(filter, response.ContentEncoding); return reader.ReadToEnd(); } finally { //Clean up. if (filter != null) filter.Dispose(); //Now replace the response filter response.Filter = oldFilter; } }

  Read the article

• Lucene: Question of score caculation with PrefixQuery

  - by Keven

  Hi, I meet some problem with the score caculation with a PrefixQuery. To change score of each document, when add document into index, I have used setBoost to change the boost of the document. Then I create PrefixQuery to search, but the result have not been changed according to the boost. It seems setBoost totally doesn't work for a PrefixQuery. Please check my code below: @Test public void testNormsDocBoost() throws Exception { Directory dir = new RAMDirectory(); IndexWriter writer = new IndexWriter(dir, new StandardAnalyzer(Version.LUCENE_CURRENT), true, IndexWriter.MaxFieldLength.LIMITED); Document doc1 = new Document(); Field f1 = new Field("contents", "common1", Field.Store.YES, Field.Index.ANALYZED); doc1.add(f1); doc1.setBoost(100); writer.addDocument(doc1); Document doc2 = new Document(); Field f2 = new Field("contents", "common2", Field.Store.YES, Field.Index.ANALYZED); doc2.add(f2); doc2.setBoost(200); writer.addDocument(doc2); Document doc3 = new Document(); Field f3 = new Field("contents", "common3", Field.Store.YES, Field.Index.ANALYZED); doc3.add(f3); doc3.setBoost(300); writer.addDocument(doc3); writer.close(); IndexReader reader = IndexReader.open(dir); IndexSearcher searcher = new IndexSearcher(reader); TopDocs docs = searcher.search(new PrefixQuery(new Term("contents", "common")), 10); for (ScoreDoc doc : docs.scoreDocs) { System.out.println("docid : " + doc.doc + " score : " + doc.score + " " + searcher.doc(doc.doc).get("contents")); } } The output is : docid : 0 score : 1.0 common1 docid : 1 score : 1.0 common2 docid : 2 score : 1.0 common3

  Read the article

• Partial mapping in Entity Framework 4

  - by Dimi Toulakis

  Hi guys, I want to be able to do the following: I have a model and inside there I do have an entity. This entity has the following structure: public class Client { public int Id { get; set; } public string Name { get; set; } public string Description { get; set; } } What I want now, is to just get the client name based on the id. Therefore I wrote a stored procedure which is doing this. CREATE PROCEDURE [Client].[GetBasics] @Id INT AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; SELECT Name FROM Client.Client INNER JOIN Client.Validity ON ClientId = Client.Id WHERE Client.Id = @Id; END Now, going back to VS, I do update the model from the database with the stored procedure included. Next step is to map this stored procedure to the client entity as a function import. This also works fine. Trying now to load one client's name results into an error during runtime... "The data reader is incompatible with the specified 'CSTestModel.Client'. A member of the type, 'Id', does not have a corresponding column in the data reader with the same name." I am OK with the message. I know how to fix this (returning as resultset Id, Name, Description). My idea behind this question is the following: I just want to load parts of the entity, not the complete entity itself. Is there a solution to my problem (except creating complex types)? And if yes, can someone point me to the right direction? Many thanks, Dimi

  Read the article

• Render User Controls and call their Page_Load

  - by David Murdoch

  The following code will not work because the controls (page1, page2, page3) require that their "Page_Load" event gets called. using System; using System.IO; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; using iTextSharp.text; using iTextSharp.text.html.simpleparser; using iTextSharp.text.pdf; public partial class utilities_getPDF : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { // add user controls to the page AddContentControl("controls/page1"); AddContentControl("controls/page2"); AddContentControl("controls/page3"); // set up the response to download the rendered PDF... Response.ContentType = "application/pdf"; Response.ContentEncoding = System.Text.Encoding.UTF8; Response.AddHeader("Content-Disposition", "attachment;filename=FileName.pdf"); Response.Cache.SetCacheability(HttpCacheability.NoCache); // get the rendered HTML of the page System.IO.StringWriter stringWrite = new StringWriter(); System.Web.UI.HtmlTextWriter htmlWrite = new HtmlTextWriter(stringWrite); this.Render(htmlWrite); StringReader reader = new StringReader(stringWrite.ToString()); // write the PDF to the OutputStream... Document doc = new Document(PageSize.A4); HTMLWorker parser = new HTMLWorker(doc); PdfWriter.GetInstance(doc, Response.OutputStream); doc.Open(); parser.Parse(reader); doc.Close(); } // the parts are probably irrelevant to the question... private const string contentPage = "~/includes/{0}.ascx"; private void AddContentControl(string page) { content.Controls.Add(myLoadControl(page)); } private Control myLoadControl(string page) { return TemplateControl.LoadControl(string.Format(contentPage, page)); } } So my question is: How can I get the controls HTML?

  Read the article

• How to retain XML string as a string field during XML deserialization

  - by detale

  I got an XML input string and want to deserialize it to an object which partially retain the raw XML. <SetProfile> <sessionId>A81D83BC-09A0-4E32-B440-0000033D7AAD</sessionId> <profileDataXml> <ArrayOfProfileItem> <ProfileItem> <Name>Pulse</Name> <Value>80</Value> </ProfileItem> <ProfileItem> <Name>BloodPresure</Name> <Value>120</Value> </ProfileItem> </ArrayOfProfileItem> </profileDataXml> </SetProfile> The class definition: public class SetProfile { public Guid sessionId; public string profileDataXml; } I hope the deserialization syntax looks like string inputXML = "..."; // the above XML XmlSerializer xs = new XmlSerializer(typeof(SetProfile)); using (TextReader reader = new StringReader(inputXML)) { SetProfile obj = (SetProfile)xs.Deserialize(reader); // use obj .... } but XMLSerializer will throw an exception and won't output < profileDataXml 's descendants to "profileDataXml" field in raw XML string. Is there any way to implement the deserialization like that?

  Read the article

• Java - SAX parser on a XHTML document

  - by Peter

  Hey, I'm trying to write a SAX parser for an XHTML document that I download from the web. At first I was having a problem with the doctype declaration (I found out from here that it was because W3C have intentionally blocked access to the DTD), but I fixed that with: XMLReader reader = parser.getXMLReader(); reader.setFeature("http://apache.org/xml/features/disallow-doctype-decl",true); However, now I'm experiencing a second problem. The SAX parser throws an exception when it reaches some Javascript embedded in the XHTML document: <script type="text/javascript" language="JavaScript"> function checkForm() { answer = true; if (siw && siw.selectingSomething) answer = false; return answer; }// </script> Specifically the parser throws an error once it reaches the &&'s, as it's expecting an entity reference. The exact exception is: `org.xml.sax.SAXParseException: The entity name must immediately follow the '&' in the entity reference. at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:198) at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.fatalError(ErrorHandlerWrapper.java:177) at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:391) at com.sun.org.apache.xerces.internal.impl.XMLScanner.reportFatalError(XMLScanner.java:1390) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEntityReference(XMLDocumentFragmentScannerImpl.java:1814) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:3000) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:624) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:486) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:810) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:740) at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:110) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1208) at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:525) at MLIAParser.readPage(MLIAParser.java:55) at MLIAParser.main(MLIAParser.java:75)` I suspect (but I don't know) that if I hadn't disabled the DTD then I wouldn't get this error. So, how can I avoid the DTD error and avoid the entity reference error? Cheers, Pete

  Read the article

• Problem parsing an atom feed using simplexml_load_file(), can't get an attribute.

  - by Craig Ward

  Hi, I am trying to create a social timeline. I pull in feeds form certain places so I have a timeline of thing I have done. The problem I am having is with Google reader Shared Items. I want to get the time at which I shared the item which is contained in <entry gr:crawl-timestamp-msec="1269088723811"> Trying to get the element using $date = $xml->entry[$i]->link->attributes()->gr:crawl-timestamp-msec; fails because of the : after gr which causes a PHP error. I could figure out how to get the element, so thought I would change the name using the code below but it throws the following error Warning: simplexml_load_file() [function.simplexml-load-file]: I/O warning : failed to load external entity "<?xml version="1.0"?><feed xmlns:idx="urn:atom-extension:indexing" xmlns:media="http://search.yahoo.com/mrss/" xmlns <?php $get_feed = file_get_contents('http://www.google.com/reader/public/atom/user/03120403612393553979/state/com.google/broadcast'); $old = "gr:crawl-timestamp-msec"; $new = "timestamp"; $xml_file = str_replace($old, $new, $get_feed); $xml = simplexml_load_file($xml_file); $i = 0; foreach ($xml->entry as $value) { $id = $xml->entry[$i]->id; $date = date('Y-m-d H:i:s', strtotime($xml->entry[$i]->attributes()->timestamp )); $text = $xml->entry[$i]->title; $link = $xml->entry[$i]->link->attributes()->href; $source = "googleshared"; echo "date = $date<br />"; $sql="INSERT IGNORE INTO timeline (id,date,text,link, source) VALUES ('$id', '$date', '$text', '$link', '$source')"; mysql_query($sql); $i++; }` Could someone point me in the right direction please. Cheers Craig

  Read the article

• How to Verify Signature, Loading PUBLIC KEY From PEM file?

  - by bbirtle

  I'm posting this in the hope it saves somebody else the hours I lost on this really stupid problem involving converting formats of public keys. If anybody sees a simpler solution or a problem, please let me know! The eCommerce system I'm using sends me some data along with a signature. They also give me their public key in .pem format. The .pem file looks like this: -----BEGIN PUBLIC KEY----- MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDe+hkicNP7ROHUssGNtHwiT2Ew HFrSk/qwrcq8v5metRtTTFPE/nmzSkRnTs3GMpi57rBdxBBJW5W9cpNyGUh0jNXc VrOSClpD5Ri2hER/GcNrxVRP7RlWOqB1C03q4QYmwjHZ+zlM4OUhCCAtSWflB4wC Ka1g88CjFwRw/PB9kwIDAQAB -----END PUBLIC KEY----- Here's the magic code to turn the above into an "RSACryptoServiceProvider" which is capable of verifying the signature. Uses the BouncyCastle library, since .NET apparently (and appallingly cannot do it without some major headaches involving certificate files): RSACryptoServiceProvider thingee; using (var reader = File.OpenText(@"c:\pemfile.pem")) { var x = new PemReader(reader); var y = (RsaKeyParameters)x.ReadObject(); thingee = (RSACryptoServiceProvider)RSACryptoServiceProvider.Create(); var pa = new RSAParameters(); pa.Modulus = y.Modulus.ToByteArray(); pa.Exponent = y.Exponent.ToByteArray(); thingee.ImportParameters(pa); } And then the code to actually verify the signature: var signature = ... //reads from the packet sent by the eCommerce system var data = ... //reads from the packet sent by the eCommerce system var sha = new SHA1CryptoServiceProvider(); byte[] hash = sha.ComputeHash(Encoding.ASCII.GetBytes(data)); byte[] bSignature = Convert.FromBase64String(signature); ///Verify signature, FINALLY: var hasValidSig = thingee.VerifyHash(hash, CryptoConfig.MapNameToOID("SHA1"), bSignature);

  Read the article

• JSON.Net and Linq

  - by user1745143

  I'm a bit of a newbie when it comes to linq and I'm working on a site that parses a json feed using json.net. The problem that I'm having is that I need to be able to pull multiple fields from the json feed and use them for a foreach block. The documentation for json.net only shows how to pull just one field. I've done a few variations after checking out the linq documentation, but I've not found anything that works best. Here's what I've got so far: WebResponse objResponse; WebRequest objRequest = HttpWebRequest.Create(url); objResponse = objRequest.GetResponse(); using (StreamReader reader = new StreamReader(objResponse.GetResponseStream())) { string json = reader.ReadToEnd(); JObject rss = JObject.Parse(json); var postTitles = from p in rss["feedArray"].Children() select (string)p["item"], //These are the fields I need to also query //(string)p["title"], (string)p["message"]; //I've also tried this with console.write and labeling the field indicies for each pulled field foreach (var item in postTitles) { lbl_slides.Text += "<div class='slide'><div class='slide_inner'><div class='slide_box'><div class='slide_content'></div><!-- slide content --></div><!-- slide box --></div><div class='rotator_photo'><img src='" + item + "' alt='' /></div><!-- rotator photo --></div><!-- slide -->"; } } Has anyone seen how to pull multiple fields from a json feed and use them as part of a foreach block (or something similar?

  Read the article

• FtpWebRequest Download File

  - by pm_2

  The following code is intended to retrieve a file via FTP. However, I'm getting an error with it. serverPath = "ftp://x.x.x.x/tmp/myfile.txt"; FtpWebRequest request = (FtpWebRequest)WebRequest.Create(serverPath); request.KeepAlive = true; request.UsePassive = true; request.UseBinary = true; request.Method = WebRequestMethods.Ftp.DownloadFile; request.Credentials = new NetworkCredential(username, password); // Read the file from the server & write to destination using (FtpWebResponse response = (FtpWebResponse)request.GetResponse()) // Error here using (Stream responseStream = response.GetResponseStream()) using (StreamReader reader = new StreamReader(responseStream)) using (StreamWriter destination = new StreamWriter(destinationFile)) { destination.Write(reader.ReadToEnd()); destination.Flush(); } The error is: The remote server returned an error: (550) File unavailable (e.g., file not found, no access) The file definately does exist on the remote machine and I am able to perform this ftp manually (i.e. I have permissions). Can anyone tell me why I might be getting this error?

  Read the article

• HttpWebRequest Timeouts After Ten Consecutive Requests

  - by Bob Mc

  I'm writing a web crawler for a specific site. The application is a VB.Net Windows Forms application that is not using multiple threads - each web request is consecutive. However, after ten successful page retrievals every successive request times out. I have reviewed the similar questions already posted here on SO, and have implemented the recommended techniques into my GetPage routine, shown below: Public Function GetPage(ByVal url As String) As String Dim result As String = String.Empty Dim uri As New Uri(url) Dim sp As ServicePoint = ServicePointManager.FindServicePoint(uri) sp.ConnectionLimit = 100 Dim request As HttpWebRequest = WebRequest.Create(uri) request.KeepAlive = False request.Timeout = 15000 Try Using response As HttpWebResponse = DirectCast(request.GetResponse, HttpWebResponse) Using dataStream As Stream = response.GetResponseStream() Using reader As New StreamReader(dataStream) If response.StatusCode <> HttpStatusCode.OK Then Throw New Exception("Got response status code: " + response.StatusCode) End If result = reader.ReadToEnd() End Using End Using response.Close() End Using Catch ex As Exception Dim msg As String = "Error reading page """ & url & """. " & ex.Message Logger.LogMessage(msg, LogOutputLevel.Diagnostics) End Try Return result End Function Have I missed something? Am I not closing or disposing of an object that should be? It seems strange that it always happens after ten consecutive requests. Notes: In the constructor for the class in which this method resides I have the following: ServicePointManager.DefaultConnectionLimit = 100 If I set KeepAlive to true, the timeouts begin after five requests. All the requests are for pages in the same domain. EDIT I added a delay between each web request of between two and seven seconds so that I do not appear to be "hammering" the site or attempting a DOS attack. However, the problem still occurs.

  Read the article

• Asp.net Crawler Webresponse Operation Timed out.

  - by Leon

  Hi I have built a simple threadpool based web crawler within my web application. Its job is to crawl its own application space and build a Lucene index of every valid web page and their meta content. Here's the problem. When I run the crawler from a debug server instance of Visual Studio Express, and provide the starting instance as the IIS url, it works fine. However, when I do not provide the IIS instance and it takes its own url to start the crawl process(ie. crawling its own domain space), I get hit by operation timed out exception on the Webresponse statement. Could someone please guide me into what I should or should not be doing here? Here is my code for fetching the page. It is executed in the multithreaded environment. private static string GetWebText(string url) { string htmlText = ""; HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(url); request.UserAgent = "My Crawler"; using (WebResponse response = request.GetResponse()) { using (Stream stream = response.GetResponseStream()) { using (StreamReader reader = new StreamReader(stream)) { htmlText = reader.ReadToEnd(); } } } return htmlText; } And the following is my stacktrace: at System.Net.HttpWebRequest.GetResponse() at CSharpCrawler.Crawler.GetWebText(String url) in c:\myAppDev\myApp\site\App_Code\CrawlerLibs\Crawler.cs:line 366 at CSharpCrawler.Crawler.CrawlPage(String url, List1 threadCityList) in c:\myAppDev\myApp\site\App_Code\CrawlerLibs\Crawler.cs:line 105 at CSharpCrawler.Crawler.CrawlSiteBuildIndex(String hostUrl, String urlToBeginSearchFrom, List1 threadCityList) in c:\myAppDev\myApp\site\App_Code\CrawlerLibs\Crawler.cs:line 89 at crawler_Default.threadedCrawlSiteBuildIndex(Object threadedCrawlerObj) in c:\myAppDev\myApp\site\crawler\Default.aspx.cs:line 108 at System.Threading.QueueUserWorkItemCallback.WaitCallback_Context(Object state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx) at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem() at System.Threading.ThreadPoolWorkQueue.Dispatch() at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback() Thanks and cheers, Leon.

  Read the article

• How can I read a DBF file with incorrectly defined column data types using ADO.NET?

  - by Jason

  I have a several DBF files generated by a third party that I need to be able to query. I am having trouble because all of the column types have been defined as characters, but the data within some of these fields actually contain binary data. If I try to read these fields using an OleDbDataReader as anything other than a string or character array, I get an InvalidCastException thrown, but I need to be able to read them as a binary value or at least cast/convert them after they are read. The columns that actually DO contain text are being returned as expected. For example, the very first column is defined as a character field with a length of 2 bytes, but the field contains a 16-bit integer. I have written the following test code to read the first column and convert it to the appropriate data type, but the value is not coming out right. The first row of the database has a value of 17365 (0x43D5) in the first column. Running the following code, what I end up getting is 17215 (0x433F). I'm pretty sure it has to do with using the ASCII encoding to get the bytes from the string returned by the data reader, but I'm not sure of another way to get the value into the format that I need, other that to write my own DBF reader and bypass ADO.NET altogether which I don't want to do unless I absolutely have to. Any help would be greatly appreciated. byte[] c0; int i0; string con = @"Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:\ASTM;Extended Properties=dBASE III;User ID=Admin;Password=;"; using (OleDbConnection c = new OleDbConnection(con)) { c.Open(); OleDbCommand cmd = c.CreateCommand(); cmd.CommandText = "SELECT * FROM astm2007"; OleDbDataReader dr = cmd.ExecuteReader(); while (dr.Read()) { c0 = Encoding.ASCII.GetBytes(dr.GetValue(0).ToString()); i0 = BitConverter.ToInt16(c0, 0); } dr.Dispose(); }

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >