Search Results

Search found 1580 results on 64 pages for 'scheme'.

Page 47/64 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

  • Is my work on a developers test being taken advantage of?

    - by CodeWarrior
    I am looking for a job and have applied to a number of positions. One of them responded, I had a pretty lengthy phone interview (perhaps an hour +) and they then set me up with the developers test. I was told that this test is estimated to take between 6 and 8 hours and that, provided it met with their approval, I could be paid for my work on it. That gave me some pause, but I endeavored. The dev test took place on a VM accessed via RDP. The task was to implement a search page in a web project that requests data from the server, displays it on the screen in a table, has a pretty complicated search filtering scheme (there are about 15 statuses and when sending the search to the server you can search by these statuses) in addition to the string/field search. They want some SVG icons to change color on certain data values, they want some data to be represented differently than how it is in the database, etc. Loooong story short, this took one heck of a lot longer than 6-8 hours. Much of it was due to the very poor VM that I was running on (Visual Studio 2013 took 10 minutes to load, and another 15 minutes to open the 3 GB ginormous solution). After completing, I was told to commit my changes to source control... Hmm, OK. I get an email back that they thought that the SVGs could have their color changed differently, they found a bug in this edge-case, there was an occasional problem with this other thing that I never experienced, etc. So I am 13-14 hours into this thing now and I have to do bug fixes. I do them, and they come back with some more. This is all apparently going into a production application. I noticed some anomalies in the code that was already in there where it looked like other people had coded all of one functionality and not anything else that I could find. Am I just being used for cheap labor? Even if they pay me the promised 50 dollars and hour for 6 hours, I have committed like 18 hours to this thing now. If I bug fix all of the stuff they keep coming up with, I will have worked at least 16 hours for free. I have taken a number of dev tests. I have never taken one where I worked on code that was destined for production. I have never taken one where I implemented a feature that was in the pipeline for development (it was planned for, and I implemented it through the course of the test). And I have never taken one that took 4 rounds and a total of 20+ hours. I get the impression that they are using their dev test to field some of the functionality, that they don't have time for in their normal team, on the cheap. Also, I wouldn't mind a 'devtest' tag.

    Read the article

  • Invalid keystore format with SSL in Tomcat 6

    - by strauberry
    I'm trying to setup SSL in my local Tomcat 6 installation. For this, I followed the official How-To doing the following: $JAVA_HOME/bin/keytool -genkey -v -keyalg RSA -alias tomcat -keypass changeit -storepass changeit $JAVA_HOME/bin/keytool -export -alias tomcat -storepass changeit -file /root/server.crt Then changing the $CATALINA_BASE/conf/server.xml, in-commenting this: <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" keystoreFile="/root/.keystore" keystorePass="changeit" /> After starting Tomcat, I get this Exception: INFO: Initializing Coyote HTTP/1.1 on http-8080 30.06.2011 10:15:24 org.apache.tomcat.util.net.jsse.JSSESocketFactory getStore SCHWERWIEGEND: Failed to load keystore type JKS with path /root/.keystore due to Invalid keystore format java.io.IOException: Invalid keystore format at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:633) at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38) at java.security.KeyStore.load(KeyStore.java:1185) When I look into the keystore with keytool -list I get root@host:~# $JAVA_HOME/bin/keytool -list Enter key store password: changeit Key store type: gkr Key store provider: GNU-CRYPTO Key store contains 1 entry(ies) Alias name: tomcat Creation timestamp: Donnerstag, 30. Juni 2011 - 10:13:40 MESZ Entry type: key-entry Certificate fingerprint (MD5): 6A:B9:...C:89:1C Obviously, the keystore types are different. How can I change the type and will this fix my problem? Thank you!

    Read the article

  • BIOS interrupts, privilege levels and paging

    - by Jack
    Hi, I was learning about Intel 8086-80486 CPUs and their interactions with HW. But I still don´t understand it quite well. Please, help me fill blank spots. First, I know that CPU communicates with HW using BIOS interrupts. But, what really happens in PC, when I call some INT instruction? I know that according the interrupt table some instructions begin to execute, but how by executing some instructions can BIOS recognize what I want to do? Becouse as far as I know, CPU has no extra communication channel with BIOS, it can only adress memory and receive data. So how can I instruct BIOS to do something, when I can only address RAM? Next thing I don't understand is about privilege levels. I know about ring model, and access rights, but how does the CPU know which privilege level has executed an instruction? I think that these privileges apply only when intruction is trying to address memory, but how does an application get its privilege level? I mean I know its level 3, but how is it set? And last thing, I know that paging is address scheme that is used to support aplication-transparent virtual memory, or swapping, but I could not find any information about how paging is tied with protected mode. Like if paging is like next mode independent of protected mode, or its somehow implemented within protected mode. And if it is implemented in protected mode, isn´t it too slow, to first address application space, then offset, and then paging folder, page and offset once again?

    Read the article

  • BIOS interrupts, priviledge levels and paging

    - by Jack
    Hi, I was learning about Intel 8086-80486 CPUs and their interactions with HW. But I still don´t understand it quite well. Please, help me fill blank spots. First, I know that CPU communicates with HW using BIOS interrupts. But, what really happens in PC, when I call some INT instruction? I know that according the interrupt table some instructions begin to execute, but how by executing some instructions can BIOS recognize what I want to do? Becouse as far as I know, CPU has no extra communication channel with BIOS, it can only adress memory and receive data. So how can I instruct BIOS to do something, when I can only adress RAM? Next thing I dont understand is about priviledge levels. I know about ring model, and acess rights, but how CPU knows which priviledge level has executed instruction? I think that these priviledges apply only when intruction is trying to adress memory, but how applications gets its priviledge level? I mean I know its level 3, but how its set? And last thing, I know that paging is adress scheme that is used to support aplication-transparent virtual memory, or swaping, but I could not find any informations about how is paging tied with protected mode. Like if paging is like next mode independent of protectet mode, or its somehow implemented within protected mode. And if it is implemented in protected mode, isn´t it too slow, to first adress application space, than offset, and than paging folder, page and offset once again? Thank you for every response.

    Read the article

  • Issues with ProxyPass and ProxyPassReverse when proxying to localhost and a different TCP port

    - by mbrownnyc
    I am attempting to use ProxyPass and ProxyPassReverse to proxy requests through Apache to another server instance that is bound to the localhost on a different TCP port that the Vhost exists (VHost is bound to :80, when the target is bound to :5000). However, I am repeatedly receiving HTTP 503 when accessing the Location. According to the ProxyPass documentation... <VirtualHost *:80> ServerName apacheserver.domain.local DocumentRoot /var/www/redmine/public ErrorLog logs/redmine_error <Directory /var/www/redmine/public> Allow from all Options -MultiViews Order allow,deny AllowOverride all </Directory> </VirtualHost> PassengerTempDir /tmp/passenger <Location /rhodecode> ProxyPass http://127.0.0.1:5000/rhodecode ProxyPassReverse http://127.0.0.1:5000/rhodecode SetEnvIf X-Url-Scheme https HTTPS=1 </Location> I have tested binding the alternate server to the interface IP address, and the same issue occurs. The server servicing request is an instance of python paste:httpserver, and it has been configured to use the /rhodecode suffix (as I saw this to be mentioned in other posts about ProxyPass). The documentation from the project itself, Rhodecode, reports to use the above. The issue is persistent if I target another server that is serving on a different port. Does ProxyPass allow proxying to a different TCP port? [update] I won't delete this, in case someone comes across the same issue. I had set an ErrorLog, and in that ErrorLog the following error was reported: [Wed Nov 09 11:36:35 2011] [error] (13)Permission denied: proxy: HTTP: attempt to connect to 127.0.0.1:5000 (192.168.100.100) failed [Wed Nov 09 11:36:35 2011] [error] ap_proxy_connect_backend disabling worker for (192.168.100.100) After some more research, I attempted to set SELinux to permissive (echo 0 >/selinux/enforce), and try again. It turns out the SELinux boolean httpd_can_network_connect must be set to 1. For persistence on reboot: setsebool -P httpd_can_network_connect=1

    Read the article

  • WebDav rename fails on an Apache mod_dav install behind NginX

    - by The Daemons Advocate
    I'm trying to solve a problem with renaming files over WebDav. Our stack consists of a single machine, serving content through Nginx, Varnish and Apache. When you try to rename a file, the operation fails with the stack that we're currently using. To connect to WebDav, a client program must: Connect over https://host:443 to NginX NginX unwraps and forwards the request to a Varnish server on http://localhost:81 Varnish forwards the request to Apache on http://localhost:82, which offers a session via mod_dav Here's an example of a failed rename: $ cadaver https://webdav.domain/ Authentication required for Webdav on server `webdav.domain': Username: user Password: dav:/> cd sandbox dav:/sandbox/> mkdir test Creating `test': succeeded. dav:/sandbox/> ls Listing collection `/sandbox/': succeeded. Coll: test 0 Mar 12 16:00 dav:/sandbox/> move test newtest Moving `/sandbox/test' to `/sandbox/newtest': redirect to http://webdav.domain/sandbox/test/ dav:/sandbox/> ls Listing collection `/sandbox/': succeeded. Coll: test 0 Mar 12 16:00 For more feedback, the WebDrive windows client logged an error 502 (Bad Gateway) and 303 (?) on the rename operation. The extended logs gave this information: Destination URI refers to different scheme or port (https://hostname:443) (want: http://hostname:82). Some other Restrictions: Investigations into NginX's Webdav modules show that it doesn't really fit our needs, and forwarding webdav traffic to Apache isn't an option because we don't want to enable Apache SSL. Are there any ways to trick mod_dav to forward to another host? I'm open to ideas :).

    Read the article

  • how to enable iis 7 dynamic content compression?

    - by davidcl
    I've turned on dynamic content compression in IIS 7, but Fiddler is showing that my dynamic pages are still being served without content-encoding: gzip. Static content compression is working fine on the same servers. Not sure if it matters but most of the dynamic pages are coldfusion pages and we're also using the IIS URL rewriting module. This is from my applicationhost.config. <httpCompression directory="%SystemDrive%\inetpub\temp\IIS Temporary Compressed Files"> <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" /> <dynamicTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/javascript" enabled="true" /> <add mimeType="*/*" enabled="false" /> </dynamicTypes> <staticTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/javascript" enabled="true" /> <add mimeType="*/*" enabled="false" /> </staticTypes> </httpCompression> ... <urlCompression doDynamicCompression="true" /> Here's a sample request: GET / HTTP/1.1 Host: web5.example.com User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6 (.NET CLR 3.5.30729) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive and response header: HTTP/1.1 200 OK Transfer-Encoding: chunked Content-Type: text/html; charset=UTF-8 Server: Microsoft-IIS/7.0 ... Date: Mon, 22 Feb 2010 20:59:36 GMT

    Read the article

  • Apache not Forwarding Client x509 Certificate to Tomcat via mod_proxy

    - by hooknc
    Hi Everyone, I am having difficulties getting a client x509 certificate to be forwarded to Tomcat from Apache using mod_proxy. From observations and reading a few logs it does seem as though the client x509 certificate is being accepted by Apache. But, when Apache makes an SSL request to Tomcat (which has clientAuth="want"), it doesn't look like the client x509 certificate is passed during the ssl handshake. Is there a reasonable way to see what Apache is doing with the client x509 certificate during its handshake with Tomcat? Here is the environment I'm working with: Apache/2.2.3 Tomcat/6.0.29 Java/6.0_23 OpenSSL 0.9.8e Here is my Apache VirtualHost SSL config: <VirtualHost xxx.xxx.xxx.xxx:443> ServerName xxx ServerAlias xxx SSLEngine On SSLProxyEngine on ProxyRequests Off ProxyPreserveHost On ErrorLog logs/ssl_error_log TransferLog logs/ssl_access_log LogLevel debug SSLProtocol all -SSLv2 SSLCipherSuite ALL:!ADH:!EXPORT:!SSLv2:RC4+RSA:+HIGH:+MEDIUM:+LOW SSLCertificateFile /usr/local/certificates/xxx.crt SSLCertificateKeyFile /usr/local/certificates/xxx.key SSLCertificateChainFile /usr/local/certificates/xxx.crt SSLVerifyClient optional_no_ca SSLOptions +ExportCertData CustomLog logs/ssl_request_log \ "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" <Proxy *> AddDefaultCharset Off Order deny,allow Allow from all </Proxy> ProxyPass / https://xxx.xxx.xxx.xxx:8443/ ProxyPassReverse / https://xxx.xxx.xxx.xxx:8443/ </VirtualHost> Then here is my Tomcat SSL Connector: <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" address="xxx.xxx.xxx.xxx" maxThreads="150" scheme="https" secure="true" keystoreFile="/usr/local/certificates/xxx.jks" keypass="xxx_pwd" clientAuth="want" sslProtocol="TLSv1" proxyName="xxx.xxx.xxx.xxx" proxyPort="443" /> Could there possibly be issues with SSL Renegotiation? Could there be problems with the Truststore in our Tomcat instance? (We are using a non-standard Truststore that has partner organization CAs.) Is there better logging for what is happening internally with Apache for SSL? Like what is happening to the client cert or why it isn't forwarding the certificate when tomcats asks for one? Any reasonable assistance would be greatly appreciated. Thank you for your time.

    Read the article

  • Mod_Proxy_AJP set up issues

    - by TripWired
    I'm trying to set up Tomcat behind Apache using mod_proxy_ajp. After tons of messing around with the configs I am stuck at a 403 page when trying to access tomcat. I had a 404 before but apparently something I changed along the way fixed that. I'm not sure which setting to change at this point. Could anyone look over the configs I have and see if anything is missing. httpd.conf <IfModule mod_proxy.c> ProxyRequests Off <Proxy *> Order deny,allow Deny from all Allow from localhost </Proxy> proxy_ajp.conf LoadModule proxy_ajp_module modules/mod_proxy_ajp.so # # When loaded, the mod_proxy_ajp module adds support for # proxying to an AJP/1.3 backend server (such as Tomcat). # To proxy to an AJP backend, use the "ajp://" URI scheme; # Tomcat is configured to listen on port 8009 for AJP requests # by default. # # # Uncomment the following lines to serve the ROOT webapp # under the /tomcat/ location, and the jsp-examples webapp # under the /examples/ location. # ProxyPass /tomcat ajp://127.0.0.1:8009/ ProxyPassReverse /tomcat ajp://127.0.0.1:8009/ ProxyPass /examples/ ajp://localhost:8009/jsp-examples/

    Read the article

  • CoreStore Encryption Error on Mac Lion

    - by Michael
    I am trying to encrypt an external drive using diskutil CoreStorage on Mac Lion 10.7.4. I thought the only requirements were that the drive have GUID partition scheme and Journaled HFS+ file system. I think my drive is configured accordingly but when I type the following command I get an error message back: Michaels-MacBook-Pro:~ Michael$ diskutil cs convert disk2 -passphrase TestPassword Error converting disk to CoreStorage: The given file system is not supported on Core Storage (-69756) Here are the details reported for the drive in question: Michaels-MacBook-Pro:~ Michael$ diskutil list disk2 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk2 1: EFI 209.7 MB disk2s1 2: Apple_HFS Test1 499.8 GB disk2s2 Michaels-MacBook-Pro:~ Michael$ diskutil list disk2 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk2 1: EFI 209.7 MB disk2s1 2: Apple_HFS Test1 499.8 GB disk2s2 Michaels-MacBook-Pro:~ Michael$ diskutil info disk2s2 Device Identifier: disk2s2 Device Node: /dev/disk2s2 Part of Whole: disk2 Device / Media Name: Test1 Volume Name: Test1 Escaped with Unicode: Test1 Mounted: Yes Mount Point: /Volumes/Test1 Escaped with Unicode: /Volumes/Test1 File System Personality: Journaled HFS+ Type (Bundle): hfs Name (User Visible): Mac OS Extended (Journaled) Journal: Journal size 40960 KB at offset 0xe8e000 Owners: Disabled Partition Type: Apple_HFS OS Can Be Installed: Yes Media Type: Generic Protocol: FireWire SMART Status: Not Supported Volume UUID: 1024D0B8-1C45-3057-B040-AE5C3841DABF Total Size: 499.8 GB (499763888128 Bytes) (exactly 976101344 512-Byte-Blocks) Volume Free Space: 499.3 GB (499315826688 Bytes) (exactly 975226224 512-Byte-Blocks) Device Block Size: 512 Bytes Read-Only Media: No Read-Only Volume: No Ejectable: Yes Whole: No Internal: No I'm a little concerned that the "Partition Type: Apple_HFS" entry is causing the problem, but I don't know how to change that. I only seem to be able to control the "File System Personality: Journaled HFS+" in Disk Utility. Can anyone shed some light on this for me?

    Read the article

  • Preseeding Ubuntu partman recipe using LVM and RAID

    - by Swav
    I'm trying to preseed Ubuntu 12.04 server installation and created a recipe that would create RAID 1 on 2 drives and then partition that using LVM. Unfortunately partman complains when creating LVM volumes saying there no partitions in recipe that could be used with LVM (in console it complains about unusable recipe). The layout I'm after is RAID 1 on sdb and sdc (installing from USB stick so it takes sda) and then use LVM to create boot, root and swap. The odd thing is that if I change the mount point of boot_lv to home the recipe works fine (apart from mounting in wrong place), but when mounting at /boot it fails I know I could use separate /boot primary partition, but can anybody tell me why it fails. Recipe and relevant options below. ## Partitioning using RAID d-i partman-auto/disk string /dev/sdb /dev/sdc d-i partman-auto/method string raid d-i partman-lvm/device_remove_lvm boolean true d-i partman-md/device_remove_md boolean true #d-i partman-lvm/confirm boolean true d-i partman-auto-lvm/new_vg_name string main_vg d-i partman-auto/expert_recipe string \ multiraid :: \ 100 512 -1 raid \ $lvmignore{ } \ $primary{ } \ method{ raid } \ . \ 256 512 256 ext3 \ $defaultignore{ } \ $lvmok{ } \ method{ format } \ format{ } \ use_filesystem{ } \ filesystem{ ext3 } \ mountpoint{ /boot } \ lv_name{ boot_lv } \ . \ 2000 5000 -1 ext4 \ $defaultignore{ } \ $lvmok{ } \ method{ format } \ format{ } \ use_filesystem{ } \ filesystem{ ext4 } \ mountpoint{ / } \ lv_name{ root_lv } \ . \ 64 512 300% linux-swap \ $defaultignore{ } \ $lvmok{ } \ method{ swap } \ format{ } \ lv_name{ swap_lv } \ . d-i partman-auto-raid/recipe string \ 1 2 0 lvm - \ /dev/sdb1#/dev/sdc1 \ . d-i mdadm/boot_degraded boolean true #d-i partman-md/confirm boolean true #d-i partman-partitioning/confirm_write_new_label boolean true #d-i partman/choose_partition select Finish partitioning and write changes to disk #d-i partman/confirm boolean true #d-i partman-md/confirm_nooverwrite boolean true #d-i partman/confirm_nooverwrite boolean true EDIT: After a bit of googling I found below snippet of code from partman-auto-lvm, but I still don't understand why would they prevent that setup if it's possible to do manually and booting from boot partition on LVM is possible. # Make sure a boot partition isn't marked as lvmok if echo "$scheme" | grep lvmok | grep -q "[[:space:]]/boot[[:space:]]"; then bail_out unusable_recipe fi

    Read the article

  • How to add a Linux Partition on FreeBSD

    - by Ömer
    Today I installed FreeBSD 9.0 PPC on my Mac mini G4 with 40GB HDD. During installation, (using the FSBD utility 'gpart') I have allocated a total of about 23GB for FreeBSD leaving 17GB totally free (neither partitioned, nor formatted) for a later Linux installation. Now, when try to install Linux (Ubuntu 10.10 PPC) on the remaining 17GB, the Linux/Ubuntu installer (or Linux's Disk Utility for the same matter) wants presumably a linux partition and when I try to add a (Linux) partition on that area using Linux DU it fails with this message: Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/hda, start=23363101696, size=16644660224, type= Entering MS-DOS parser (offset=0, size=40007761920) No MSDOS_MAGIC found Exiting MS-DOS parser Entering Apple parser Mac MAGIC found, block_size=512 map_count = 17 Leaving Apple parser Apple partition table detected containing partition table scheme = 2 got it Error: The partition's data region doesn't occupy the entire partition. ped_disk_new() failed Now, I'm trying to add a Linux partition on FreeBSD running on the harddisk. I use seemingly most suitable tool for this job: gpart. Here is the 'gpart show ad0' But it seems unable to add a Linux partition because "man gpart" doesn't list either "Linux Partition" nor anything like Ext2 or Ext3/Ext4. The closest thing to Linux Partition in gpart is "mbr" but it doesn't work: #gpart add -t mbr ado So, how to add properly a Linux Partition on FreeBSD? Thanks.

    Read the article

  • How to utilize 4TB HDD, which is showing up as 2.72TB

    - by mason
    I have two internal HDD's. They're both 4TB capacity. They're both formatted with the GPT partitioning scheme, and they're Basic Discs (not dynamic). I'm on Windows 8 64bit. I have UEFI, not BIOS. When I view the discs in Computer Management MMC with Disk Management, they show that each partition is formatted as NTFS and takes up the entire drive. And it shows that each drive has a capacity of 3725.90GB in the bottom section of Disk Management, but 2.794.39GB in the top section. When I view the discs in "My Computer"/"This PC" they only show up as 2.72TB, which matches the amount capacity I'm getting from some other 3TB HDD's I have. Why are they showing up as only 2.72GB? Will I be able to use the full 4TB capacity? Also of note, although I'm not sure it's relevant: I often get corrupted files on these two HDD's. None of my other HDD's give me corrupted files. Usually the problem is fixed by running chkdsk /f on the drives, but it's extremely annoying. In the picture below, it's the X: and Y: drives. Steps I've tried Flashed latest BIOS (MSI J.90 to K.30)

    Read the article

  • Permission denied when running Rails app in VirtualBox Ubuntu guest with files on Windows host

    - by Ola Tuvesson
    I think I'm close to having my dev environment set up exactly the way I want, but one final snag remains. I'm running VirtualBox on a Windows 7 64bit host, with my dev enviroment inside a Ubuntu 12.04 guest. I want to keep the files for my projects on the host filesystem - partly so I can access them when the Ubuntu guest is not running, but also so I can use Tortoise and other Windows based tools (cough Photoshop), and it also eases my backup scheme somewhat. So I've got a folder "Rails" on my NTFS drive, which I've shared (Samba) from the host with a user specifically created for the Ubuntu guest. The mount point has been set up and an entry added to fstab (cifs), using a credentials file and the options iocharset=utf8,mode=0777,dir_mode=07??77 This mounts fine and my Ubuntu user has both read and write permissions to the contents. But when I try to start my Rails app I get permission errors on any files the app needs to write to (e.g. the log file) - why is that? Are there any major conceptual flaws with this approach? Would I be better off using the VBox "shared folders" function?

    Read the article

  • Apache reverse proxy: no protocol handler

    - by gonvaled
    I am trying to configure a reverse proxy with apache, but I am getting a No protocol handler was valid for the URL error, which I do not understand. This is the relevant configuration of apache: ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /gonvaled/examples/jsonrpc/output/services/ http://localhost:8000/services/ ProxyPassReverse /gonvaled/examples/jsonrpc/output/services/ http://localhost:8000/services/ The requests is reaching apache as: POST /gonvaled/examples/jsonrpc/output/services/EchoService.py HTTP/1.1 And they should be forwarded to my internal service, located at: 0.0.0.0:8000/services/EchoService.py These are the logs: ==> /var/log/apache2/error.log <== [Wed Jun 20 02:05:20 2012] [debug] proxy_util.c(1506): [client 127.0.0.1] proxy: http: found worker http://localhost:8000/services/ for http://localhost:8000/services/EchoService.py, referer: http://localhost/gonvaled/examples/jsonrpc/output/JSONRPCExample.safari.cache.html [Wed Jun 20 02:05:20 2012] [debug] mod_proxy.c(998): Running scheme http handler (attempt 0) [Wed Jun 20 02:05:20 2012] [warn] proxy: No protocol handler was valid for the URL /gonvaled/examples/jsonrpc/output/services/EchoService.py. If you are using a DSO version of mod_proxy, make sure the proxy submodules are included in the configuration using LoadModule. [Wed Jun 20 02:05:20 2012] [debug] mod_deflate.c(615): [client 127.0.0.1] Zlib: Compressed 614 to 373 : URL /gonvaled/examples/jsonrpc/output/services/EchoService.py, referer: http://localhost/gonvaled/examples/jsonrpc/output/JSONRPCExample.safari.cache.html ==> /var/log/apache2/access.log <== 127.0.0.1 - - [20/Jun/2012:02:05:20 +0200] "POST /gonvaled/examples/jsonrpc/output/services/EchoService.py HTTP/1.1" 500 598 "http://localhost/gonvaled/examples/jsonrpc/output/JSONRPCExample.safari.cache.html" "Mozilla/5.0 (X11; Linux i686) AppleWebKit/535.19 (KHTML, like Gecko) Chrome/18.0.1025.162 Safari/535.19"

    Read the article

  • route propogation using OSPF in a network

    - by liv2hak
    I am using Juniper J-series routers to emulate a small telco and VPN customer.The internal routing will be configured with OSPF,MPLS including a default and backup path,RSVP for distributing labels withing the telco,OSPF for distributing routes from the customer edge (CE) routers to the VRF's in the adjacent PE's and finally iBGP for distributing customer routes between VRF's in different PEs. The topology of the network is shown below. The Addressing scheme for the network is as follows. UOW-TAU ******* ge-0/0/0 192.168.3.1 TAU-PE1 ******* ge-0/0/0 10.0.1.0 ge-0/0/1 10.0.2.0 ge-0/0/2 192.168.3.2 TAU-P1 ****** ge-0/0/0 172.16.1.0 ge-0/0/1 172.16.3.1 ge-0/0/2 10.0.2.2 HAM-P1 ****** ge-0/0/0 172.16.3.2 ge-0/0/1 172.16.2.1 ge-0/0/3 10.0.3.2 ACK-P1 ****** ge-0/0/0 172.16.1.2 ge-0/0/2 172.16.2.2 ge-0/0/3 10.0.1.2 HAM-PE1 ******* ge-0/0/0 10.0.3.1 ge-0/0/2 192.168.4.2 UOW-HAM ******* ge-0/0/0 192.168.4.1 I also set up loopback address for each node. I want to setup OSPF so that path to each internal subnet and router loopback address is propogated to all PE and P nodes.I also want to select a single area for PE and P nodes,and on each node I should add each interface that should be propogated. How do I accomplish this.? With my understanding below is the procedure to achieve this.Is the below explanation correct? I set up OSPF on UOW-TAU ge-0/0/0 interface and ge-0/0/1 interface and UOW-HAM ge-0/0/0 interface and ge-0/0/1 interface. let me call this Area 100. Once I have done this I should be able to reach each node from others using ping and traceroute. Any help is highly appreciated.

    Read the article

  • Nginx all subdomain points to one subdomain (gitlab) rule

    - by Alkimake
    I have installed gitlab on my server and use nginx as http server... I simply used recipe for gitlab on nginx # GITLAB # Maintainer: @randx # App Version: 3.0 upstream gitlab { server unix:/home/gitlab/gitlab/tmp/sockets/gitlab.socket; } server { listen 192.168.250.81:80; # e.g., listen 192.168.1.1:80; server_name gitlab.xxx.com; # e.g., server_name source.example.com; root /home/gitlab/gitlab/public; # individual nginx logs for this gitlab vhost access_log /var/log/nginx/gitlab_access.log; error_log /var/log/nginx/gitlab_error.log; location / { # serve static files from defined root folder;. # @gitlab is a named location for the upstream fallback, see below try_files $uri $uri/index.html $uri.html @gitlab; } # if a file, which is not found in the root folder is requested, # then the proxy pass the request to the upsteam (gitlab unicorn) location @gitlab { proxy_read_timeout 300; # https://github.com/gitlabhq/gitlabhq/issues/694 proxy_connect_timeout 300; # https://github.com/gitlabhq/gitlabhq/issues/694 proxy_redirect off; proxy_set_header X-Forwarded-Proto $scheme; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_pass http://gitlab; } } gitlab.xxx.com works fine and i get gitlab web documents. But if i want another subdomain i use for Jira (jira.xxx.com) on port 80 (i setup jira on 8080 port normally) gets gitlab web site also. How can i restrict this rule only serving for gitlab, or may be i can redirect jira.xxx.com to jira.xxx.com:8080

    Read the article

  • IIS7 Compression CSS files only compressed when dynamic compression is enabled

    - by Paul
    If anyone can help it would be appreciated. I would like to enable compression for static files within IIS7 (for the sake of simplicity I'll just refer to static css files for the time being). The problem I'm getting is that css files are only compressed when both dynamic and static compression is enabled in IIS for the website. What I really want to achieve is css compression (static file) whilst leaving the dynamic (aspx) pages as uncompressed for the time being (to avoid unnecessary CPU load). I am puzzled as to why just leaving 'static compression' enabled causes css files to be returned uncompressed. My applicationHost.config file has not be altered and looks like this: <httpCompression directory="%SystemDrive%\inetpub\temp\IIS Temporary Compressed Files"> <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" /> <staticTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/javascript" enabled="true" /> <add mimeType="*/*" enabled="false" /> </staticTypes> <dynamicTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="*/*" enabled="false" /> </dynamicTypes> </httpCompression> The server-wide compression setting within IIS is set to 'Dynamic Disabled' and 'Static Enabled' from the Server Features Compression page. The web-site compression setting (Server Sites MyWebsite Features Compression) is where I am enabling and disabling dynamic compression as detailed above. Any help would be really help me get unstuck on this. Thanks

    Read the article

  • RemoteApp .rdp embed creds?

    - by Chris_K
    Windows 2008 R2 server running Remote Desktop Services (what we used to call Terminal Services back in the olden days). This server is the entry point into a hosted application -- you could call it Software as a Service I suppose. We have 3rd party clients connecting to use it. Using RemoteApp Manager to build RemoteApp .rdp shortcuts to distribute to client workstations. These workstations are not in the same domain as the RDS server. There is no trust relationship between domains (nor will there be). There is a tightly controlled site to site VPN between workstations and the RDS server, we're quite confident we have access to the server locked down. The remoteApp being run is an ERP application with its own authentication scheme. The issue? I'm trying to avoid the need to create AD logins for every end user when connecting to the RemoteApp server. In fact, since we're doing a remoteApp and they have to authenticate to that app, I'd rather just not prompt them at all for AD creds. I certainly don't want them caught up in managing AD passwords (and periodic expirations) for accounts they only use to get to their ERP login. However, I can't figure out how to embed AD creds in a RemoteApp .rdp file. I don't really want to turn off all authentication on the RDS server at that level. Any good options? My goal is to make this as seamless as possible for the end-users. Clarifying questions are welcome.

    Read the article

  • cPanel web server redundancy advice?

    - by crgnz
    At present I operate a (reasonably low volume) web-hosting service with a Centos 5.3 server running cPanel/WHM. I would like to implement a level of redundancy such that in the event of server failure, I can restore service with a minimum of effort in less than 60 minutes. I also want to setup a secondary DNS that cPanel will replicate with. My current idea is to kill two birds with one stone by: My current server is called "www1" Purchase an identical server (HP DL360 G4) with mirrored disks. Call this server "www2" Install Centos 5.4 (or perhaps I should install 5.3 to be identical with www1) Install cPanel/WHM on this server and fully license it Setup www1 and www2 cPanel to replicate DNS with each other Setup a nightly replication script that does the following: a) rsync's the /home directory from www1 to www2 b) dumps all MySQL databases on www1 and copies them to a temp folder (with root access only) on www2 c) triggers a script to run on www2 that restores the MySQL dumps Thus each night a fully working copy of all the websites and MySQL databases is copied to www2. I do not have enough knowledge of MySQL replication to understand if it works safely and transparently with cPanel. Thus I propose the mysql dump/copy/restore due to not knowing any better! In the event that www1 dies a horrible death, I envisage that I could login to www2, change the IP addresses to those that www1 had, and presto, the websites are available again. The advantage of this idea is that it is fairly simple and "low tech" and thus does not require an expert sysadmin to setup and monitor (I am NOT an expert sysadmin) The disadvantage of this idea is that up to a full days worth of data changes would be lost. I think this would be acceptable to the sorts of customers I host at the moment. The other disadvantage would be having to pay for a full cPanel license, but I am comfortable with that cost, so for now all I want to discuss are technical considerations. Is this a sound scheme?

    Read the article

  • Portable USB drives hidden pertition - New request

    - by ZXC
    This question was made by Francesco on Jul 29 '11 at 17:14. and the replies were not satisfactory due they not point to an important problem that´s: Why could anyone want to make certain data only accesible for a program but not to the users?. For example: If I want to do a safe distribution of original music for demostration purposes I will need several requisites: 1) The music should be heard using a simple procedure like selecting the name of each song on a playlist of a mediaplayer. 2) The portable media, ussually a portable USB drive, must hide for complete and should make unaccesible the files that contain the audio data to anything but the mediaplayer, that must be in the first partition, the one that is visible. 3) Considering that´s impossible to really hide files in a non-hidden partition, a second hidden partition should be created in the USB drive and the audio data will be stored there. 4) The trick is to read the audio data files stored in the hidden partition with a mediaplayer stored in the visible partition, the media player also should be a complete standalone program and independent from any library of the operating system except of the OS audio system. 5) The hidden partition should have a copy protection scheme that could impede to do copies of the data or create working ISO images of it. I know that this description could not be technically accurate but it has a complete logic from the needs of a music producer against the problem of piracy. The philosophy that surrounds the concept is to transform a virtual object like a digital string of audio in a solid object like the analog vinyl discs are.

    Read the article

  • How do I configure custom URL handlers on OS X?

    - by cwd
    I've been reading a lot online about custom URL handlers / custom protocol handlers such as: Launching External Applications using Custom Protocols under OSX OS X URL handler to open links to local files I get that you can tell the system that a particular program is able to handle a certain scheme / protocol with the Info.plist file: <key>CFBundleURLTypes</key> <array> <dict> <key>CFBundleURLName</key> <string>Local File</string> <key>CFBundleURLSchemes</key> <array> <string>local</string> </array> </dict> </array> <key>NSUIElement</key> <true/> But if there are multiple applications that are capable of opening the same URL handler, such as mailto: how do you specify which one you want the system to use? There were some references to utilities like the More Internet preference pane which no longer seems to be available from the author's site. I did find it online by Googling but it seems a bit shaky - like it was written for an older OSX - perhaps Tiger. I haven't been able to find information on how to set the URL handler for protocols and custom protocols. I'm assuming there is a plist file somewhere that I can edit - or maybe there is a newer, better utility that works well with Mountain Lion?

    Read the article

  • Two DHCP servers on the same network

    - by CesarGon
    We are setting up a routing link between the Windows Server 2008 networks of two different buildings in my organisation. Each network uses a different IP addressing scheme (one uses public addresses, the other one uses private), but the goal is having a single Windows Server domain across the gap between the buildings. The link is provided by a 100-Mbps point-to-point line. I have always understood that you should not have more than one DHCP server on a network. However, we are planning to put a domain controller on each building, and each domain controller will be a DNS server and a DHCP server as well. The intention is that a machine booting up in building A gets its IP address from the DHCP server closer to it, in building A, while a machine booting up in building B gets an address from the DHCP server in building B. Since the two buildings will be linked and the network will be only one, will this work? How can I avoid that a machine booting up in building A gets an address from the DHCP server in building B (or vice versa)? Thanks.

    Read the article

  • Two DHCP servers on the same network

    - by CesarGon
    We are setting up a routing link between the Windows Server 2008 networks of two different buildings in my organisation. Each network uses a different IP addressing scheme (one uses public addresses, the other one uses private), but the goal is having a single Windows Server domain across the gap between the buildings. The link is provided by a 100-Mbps point-to-point line. I have always understood that you should not have more than one DHCP server on a network. However, we are planning to put a domain controller on each building, and each domain controller will be a DNS server and a DHCP server as well. The intention is that a machine booting up in building A gets its IP address from the DHCP server closer to it, in building A, while a machine booting up in building B gets an address from the DHCP server in building B. Since the two buildings will be linked and the network will be only one, will this work? How can I avoid that a machine booting up in building A gets an address from the DHCP server in building B (or vice versa)? Thanks.

    Read the article

  • Verify client certificate CN in Tomcat(APR)

    - by Petter
    I'm running a tomcat installation with the APR libraries installed (with the OpenSSL HTTPS stack that comes with it). What I'm trying to do is to lock a specific HTTPS connector down to users of a specific certificate. Adding client certificate verification is no issue, but I can't get it to validate against a specific Common name only. I was perhaps a bit naïve and thought the mod_ssl attribute SSLRequire typically used in Apache Httpd would work, but that property is not recognized by the Tomcat implementation. (http://tomcat.apache.org/tomcat-7.0-doc/config/http.html#SSL%20Support points to some mod_ssl docs, but the Tomcat implementation does not seem to cover all aspects of mod_ssl). I can get this to work by using the Java version of the connector instead of APR (losing some performance) and just add a trust store with that one certificate in it. However, using openssl without the SSLRequire expressions, I'm not sure how to do this with Tomcat7 (on Windows if that matters). <Connector protocol="HTTP/1.1" port="443" maxThreads="150" scheme="https" secure="true" SSLEnabled="true" SSLCertificateFile="mycert.pem" SSLCertificateKeyFile="privkey.pem" SSLCACertificateFile="CABundle.pem" SSLVerifyClient="require" SSLProtocol="TLSv1" SSLRequire="(%{SSL_CLIENT_S_DN_CN} eq &quot;host.example.com&quot;)"/> Can you suggest a way to make this work using Tomcat/APR/OpenSSL?

    Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >