Search Results

Search found 7606 results on 305 pages for 'tmax dev'.

Page 47/305 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

  • mdadm lvm and ext4 slowness - How can I speed it up?

    - by beatbreaker
    I can't figure out why I'm getting such terrible times out of my mdadm and in particular the lvm partitions in it. I made the raid: mdadm --create --verbose /dev/md0 --level=5 --chunk=1024 --raid-devices=4 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 # cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md0 : active raid5 sda1[0] sdd1[3] sdc1[2] sdb1[1] 2930279424 blocks level 5, 1024k chunk, algorithm 2 [4/4] [UUUU] I then created the physical volume, volume group, and logical volumes, I then formatted the logical volumes to ext4 using the following commands I got from here: http://busybox.net/~aldot/mkfs_stride.html mkfs.ext3 -b 4096 -E stride=256,stripe-width=768 /dev/datavg/blah Now I'm confused, I had these lvs running real quick before in mdadm but now that I've 'optimized' everything it's slower, eg, before: /dev/datavg/lv_audio: Timing buffered disk reads: 598 MB in 3.01 seconds = 198.85 MB/sec but now after: /dev/datavg/audio: Timing buffered disk reads: 198 MB in 3.00 seconds = 65.96 MB/sec That's pitiful! What's happened here? Did I not follow the instructions correctly? Can i reshape the ext4 partitons to default back to what they were? (I used defaults before and they were fine!)

    Read the article

  • Point inside Oriented Bounding Box?

    - by Milo
    I have an OBB2D class based on SAT. This is my point in OBB method: public boolean pointInside(float x, float y) { float newy = (float) (Math.sin(angle) * (y - center.y) + Math.cos(angle) * (x - center.x)); float newx = (float) (Math.cos(angle) * (x - center.x) - Math.sin(angle) * (y - center.y)); return (newy > center.y - (getHeight() / 2)) && (newy < center.y + (getHeight() / 2)) && (newx > center.x - (getWidth() / 2)) && (newx < center.x + (getWidth() / 2)); } public boolean pointInside(Vector2D v) { return pointInside(v.x,v.y); } Here is the rest of the class; the parts that pertain: public class OBB2D { private Vector2D projVec = new Vector2D(); private static Vector2D projAVec = new Vector2D(); private static Vector2D projBVec = new Vector2D(); private static Vector2D tempNormal = new Vector2D(); private Vector2D deltaVec = new Vector2D(); private ArrayList<Vector2D> collisionPoints = new ArrayList<Vector2D>(); // Corners of the box, where 0 is the lower left. private Vector2D corner[] = new Vector2D[4]; private Vector2D center = new Vector2D(); private Vector2D extents = new Vector2D(); private RectF boundingRect = new RectF(); private float angle; //Two edges of the box extended away from corner[0]. private Vector2D axis[] = new Vector2D[2]; private double origin[] = new double[2]; public OBB2D(float centerx, float centery, float w, float h, float angle) { for(int i = 0; i < corner.length; ++i) { corner[i] = new Vector2D(); } for(int i = 0; i < axis.length; ++i) { axis[i] = new Vector2D(); } set(centerx,centery,w,h,angle); } public OBB2D(float left, float top, float width, float height) { for(int i = 0; i < corner.length; ++i) { corner[i] = new Vector2D(); } for(int i = 0; i < axis.length; ++i) { axis[i] = new Vector2D(); } set(left + (width / 2), top + (height / 2),width,height,0.0f); } public void set(float centerx,float centery,float w, float h,float angle) { float vxx = (float)Math.cos(angle); float vxy = (float)Math.sin(angle); float vyx = (float)-Math.sin(angle); float vyy = (float)Math.cos(angle); vxx *= w / 2; vxy *= (w / 2); vyx *= (h / 2); vyy *= (h / 2); corner[0].x = centerx - vxx - vyx; corner[0].y = centery - vxy - vyy; corner[1].x = centerx + vxx - vyx; corner[1].y = centery + vxy - vyy; corner[2].x = centerx + vxx + vyx; corner[2].y = centery + vxy + vyy; corner[3].x = centerx - vxx + vyx; corner[3].y = centery - vxy + vyy; this.center.x = centerx; this.center.y = centery; this.angle = angle; computeAxes(); extents.x = w / 2; extents.y = h / 2; computeBoundingRect(); } //Updates the axes after the corners move. Assumes the //corners actually form a rectangle. private void computeAxes() { axis[0].x = corner[1].x - corner[0].x; axis[0].y = corner[1].y - corner[0].y; axis[1].x = corner[3].x - corner[0].x; axis[1].y = corner[3].y - corner[0].y; // Make the length of each axis 1/edge length so we know any // dot product must be less than 1 to fall within the edge. for (int a = 0; a < axis.length; ++a) { float l = axis[a].length(); float ll = l * l; axis[a].x = axis[a].x / ll; axis[a].y = axis[a].y / ll; origin[a] = corner[0].dot(axis[a]); } } public void computeBoundingRect() { boundingRect.left = JMath.min(JMath.min(corner[0].x, corner[3].x), JMath.min(corner[1].x, corner[2].x)); boundingRect.top = JMath.min(JMath.min(corner[0].y, corner[1].y),JMath.min(corner[2].y, corner[3].y)); boundingRect.right = JMath.max(JMath.max(corner[1].x, corner[2].x), JMath.max(corner[0].x, corner[3].x)); boundingRect.bottom = JMath.max(JMath.max(corner[2].y, corner[3].y),JMath.max(corner[0].y, corner[1].y)); } public void set(RectF rect) { set(rect.centerX(),rect.centerY(),rect.width(),rect.height(),0.0f); } // Returns true if other overlaps one dimension of this. private boolean overlaps1Way(OBB2D other) { for (int a = 0; a < axis.length; ++a) { double t = other.corner[0].dot(axis[a]); // Find the extent of box 2 on axis a double tMin = t; double tMax = t; for (int c = 1; c < corner.length; ++c) { t = other.corner[c].dot(axis[a]); if (t < tMin) { tMin = t; } else if (t > tMax) { tMax = t; } } // We have to subtract off the origin // See if [tMin, tMax] intersects [0, 1] if ((tMin > 1 + origin[a]) || (tMax < origin[a])) { // There was no intersection along this dimension; // the boxes cannot possibly overlap. return false; } } // There was no dimension along which there is no intersection. // Therefore the boxes overlap. return true; } public void moveTo(float centerx, float centery) { float cx,cy; cx = center.x; cy = center.y; deltaVec.x = centerx - cx; deltaVec.y = centery - cy; for (int c = 0; c < 4; ++c) { corner[c].x += deltaVec.x; corner[c].y += deltaVec.y; } boundingRect.left += deltaVec.x; boundingRect.top += deltaVec.y; boundingRect.right += deltaVec.x; boundingRect.bottom += deltaVec.y; this.center.x = centerx; this.center.y = centery; computeAxes(); } // Returns true if the intersection of the boxes is non-empty. public boolean overlaps(OBB2D other) { if(right() < other.left()) { return false; } if(bottom() < other.top()) { return false; } if(left() > other.right()) { return false; } if(top() > other.bottom()) { return false; } if(other.getAngle() == 0.0f && getAngle() == 0.0f) { return true; } return overlaps1Way(other) && other.overlaps1Way(this); } public Vector2D getCenter() { return center; } public float getWidth() { return extents.x * 2; } public float getHeight() { return extents.y * 2; } public void setAngle(float angle) { set(center.x,center.y,getWidth(),getHeight(),angle); } public float getAngle() { return angle; } public void setSize(float w,float h) { set(center.x,center.y,w,h,angle); } public float left() { return boundingRect.left; } public float right() { return boundingRect.right; } public float bottom() { return boundingRect.bottom; } public float top() { return boundingRect.top; } public RectF getBoundingRect() { return boundingRect; } public boolean overlaps(float left, float top, float right, float bottom) { if(right() < left) { return false; } if(bottom() < top) { return false; } if(left() > right) { return false; } if(top() > bottom) { return false; } return true; } public static float distance(float ax, float ay,float bx, float by) { if (ax < bx) return bx - ay; else return ax - by; } public Vector2D project(float ax, float ay) { projVec.x = Float.MAX_VALUE; projVec.y = Float.MIN_VALUE; for (int i = 0; i < corner.length; ++i) { float dot = Vector2D.dot(corner[i].x,corner[i].y,ax,ay); projVec.x = JMath.min(dot, projVec.x); projVec.y = JMath.max(dot, projVec.y); } return projVec; } public Vector2D getCorner(int c) { return corner[c]; } public int getNumCorners() { return corner.length; } public boolean pointInside(float x, float y) { float newy = (float) (Math.sin(angle) * (y - center.y) + Math.cos(angle) * (x - center.x)); float newx = (float) (Math.cos(angle) * (x - center.x) - Math.sin(angle) * (y - center.y)); return (newy > center.y - (getHeight() / 2)) && (newy < center.y + (getHeight() / 2)) && (newx > center.x - (getWidth() / 2)) && (newx < center.x + (getWidth() / 2)); } public boolean pointInside(Vector2D v) { return pointInside(v.x,v.y); } public ArrayList<Vector2D> getCollsionPoints(OBB2D b) { collisionPoints.clear(); for(int i = 0; i < corner.length; ++i) { if(b.pointInside(corner[i])) { collisionPoints.add(corner[i]); } } for(int i = 0; i < b.corner.length; ++i) { if(pointInside(b.corner[i])) { collisionPoints.add(b.corner[i]); } } return collisionPoints; } }; What could be wrong? When I getCollisionPoints for 2 OBBs I know are penetrating, it returns no points. Thanks

    Read the article

  • Point of contact of 2 OBBs?

    - by Milo
    I'm working on the physics for my GTA2-like game so I can learn more about game physics. The collision detection and resolution are working great. I'm now just unsure how to compute the point of contact when I hit a wall. Here is my OBB class: public class OBB2D { private Vector2D projVec = new Vector2D(); private static Vector2D projAVec = new Vector2D(); private static Vector2D projBVec = new Vector2D(); private static Vector2D tempNormal = new Vector2D(); private Vector2D deltaVec = new Vector2D(); // Corners of the box, where 0 is the lower left. private Vector2D corner[] = new Vector2D[4]; private Vector2D center = new Vector2D(); private Vector2D extents = new Vector2D(); private RectF boundingRect = new RectF(); private float angle; //Two edges of the box extended away from corner[0]. private Vector2D axis[] = new Vector2D[2]; private double origin[] = new double[2]; public OBB2D(float centerx, float centery, float w, float h, float angle) { for(int i = 0; i < corner.length; ++i) { corner[i] = new Vector2D(); } for(int i = 0; i < axis.length; ++i) { axis[i] = new Vector2D(); } set(centerx,centery,w,h,angle); } public OBB2D(float left, float top, float width, float height) { for(int i = 0; i < corner.length; ++i) { corner[i] = new Vector2D(); } for(int i = 0; i < axis.length; ++i) { axis[i] = new Vector2D(); } set(left + (width / 2), top + (height / 2),width,height,0.0f); } public void set(float centerx,float centery,float w, float h,float angle) { float vxx = (float)Math.cos(angle); float vxy = (float)Math.sin(angle); float vyx = (float)-Math.sin(angle); float vyy = (float)Math.cos(angle); vxx *= w / 2; vxy *= (w / 2); vyx *= (h / 2); vyy *= (h / 2); corner[0].x = centerx - vxx - vyx; corner[0].y = centery - vxy - vyy; corner[1].x = centerx + vxx - vyx; corner[1].y = centery + vxy - vyy; corner[2].x = centerx + vxx + vyx; corner[2].y = centery + vxy + vyy; corner[3].x = centerx - vxx + vyx; corner[3].y = centery - vxy + vyy; this.center.x = centerx; this.center.y = centery; this.angle = angle; computeAxes(); extents.x = w / 2; extents.y = h / 2; computeBoundingRect(); } //Updates the axes after the corners move. Assumes the //corners actually form a rectangle. private void computeAxes() { axis[0].x = corner[1].x - corner[0].x; axis[0].y = corner[1].y - corner[0].y; axis[1].x = corner[3].x - corner[0].x; axis[1].y = corner[3].y - corner[0].y; // Make the length of each axis 1/edge length so we know any // dot product must be less than 1 to fall within the edge. for (int a = 0; a < axis.length; ++a) { float l = axis[a].length(); float ll = l * l; axis[a].x = axis[a].x / ll; axis[a].y = axis[a].y / ll; origin[a] = corner[0].dot(axis[a]); } } public void computeBoundingRect() { boundingRect.left = JMath.min(JMath.min(corner[0].x, corner[3].x), JMath.min(corner[1].x, corner[2].x)); boundingRect.top = JMath.min(JMath.min(corner[0].y, corner[1].y),JMath.min(corner[2].y, corner[3].y)); boundingRect.right = JMath.max(JMath.max(corner[1].x, corner[2].x), JMath.max(corner[0].x, corner[3].x)); boundingRect.bottom = JMath.max(JMath.max(corner[2].y, corner[3].y),JMath.max(corner[0].y, corner[1].y)); } public void set(RectF rect) { set(rect.centerX(),rect.centerY(),rect.width(),rect.height(),0.0f); } // Returns true if other overlaps one dimension of this. private boolean overlaps1Way(OBB2D other) { for (int a = 0; a < axis.length; ++a) { double t = other.corner[0].dot(axis[a]); // Find the extent of box 2 on axis a double tMin = t; double tMax = t; for (int c = 1; c < corner.length; ++c) { t = other.corner[c].dot(axis[a]); if (t < tMin) { tMin = t; } else if (t > tMax) { tMax = t; } } // We have to subtract off the origin // See if [tMin, tMax] intersects [0, 1] if ((tMin > 1 + origin[a]) || (tMax < origin[a])) { // There was no intersection along this dimension; // the boxes cannot possibly overlap. return false; } } // There was no dimension along which there is no intersection. // Therefore the boxes overlap. return true; } public void moveTo(float centerx, float centery) { float cx,cy; cx = center.x; cy = center.y; deltaVec.x = centerx - cx; deltaVec.y = centery - cy; for (int c = 0; c < 4; ++c) { corner[c].x += deltaVec.x; corner[c].y += deltaVec.y; } boundingRect.left += deltaVec.x; boundingRect.top += deltaVec.y; boundingRect.right += deltaVec.x; boundingRect.bottom += deltaVec.y; this.center.x = centerx; this.center.y = centery; computeAxes(); } // Returns true if the intersection of the boxes is non-empty. public boolean overlaps(OBB2D other) { if(right() < other.left()) { return false; } if(bottom() < other.top()) { return false; } if(left() > other.right()) { return false; } if(top() > other.bottom()) { return false; } if(other.getAngle() == 0.0f && getAngle() == 0.0f) { return true; } return overlaps1Way(other) && other.overlaps1Way(this); } public Vector2D getCenter() { return center; } public float getWidth() { return extents.x * 2; } public float getHeight() { return extents.y * 2; } public void setAngle(float angle) { set(center.x,center.y,getWidth(),getHeight(),angle); } public float getAngle() { return angle; } public void setSize(float w,float h) { set(center.x,center.y,w,h,angle); } public float left() { return boundingRect.left; } public float right() { return boundingRect.right; } public float bottom() { return boundingRect.bottom; } public float top() { return boundingRect.top; } public RectF getBoundingRect() { return boundingRect; } public boolean overlaps(float left, float top, float right, float bottom) { if(right() < left) { return false; } if(bottom() < top) { return false; } if(left() > right) { return false; } if(top() > bottom) { return false; } return true; } public static float distance(float ax, float ay,float bx, float by) { if (ax < bx) return bx - ay; else return ax - by; } public Vector2D project(float ax, float ay) { projVec.x = Float.MAX_VALUE; projVec.y = Float.MIN_VALUE; for (int i = 0; i < corner.length; ++i) { float dot = Vector2D.dot(corner[i].x,corner[i].y,ax,ay); projVec.x = JMath.min(dot, projVec.x); projVec.y = JMath.max(dot, projVec.y); } return projVec; } public Vector2D getCorner(int c) { return corner[c]; } public int getNumCorners() { return corner.length; } public static float collisionResponse(OBB2D a, OBB2D b, Vector2D outNormal) { float depth = Float.MAX_VALUE; for (int i = 0; i < a.getNumCorners() + b.getNumCorners(); ++i) { Vector2D edgeA; Vector2D edgeB; if(i >= a.getNumCorners()) { edgeA = b.getCorner((i + b.getNumCorners() - 1) % b.getNumCorners()); edgeB = b.getCorner(i % b.getNumCorners()); } else { edgeA = a.getCorner((i + a.getNumCorners() - 1) % a.getNumCorners()); edgeB = a.getCorner(i % a.getNumCorners()); } tempNormal.x = edgeB.x -edgeA.x; tempNormal.y = edgeB.y - edgeA.y; tempNormal.normalize(); projAVec.equals(a.project(tempNormal.x,tempNormal.y)); projBVec.equals(b.project(tempNormal.x,tempNormal.y)); float distance = OBB2D.distance(projAVec.x, projAVec.y,projBVec.x,projBVec.y); if (distance > 0.0f) { return 0.0f; } else { float d = Math.abs(distance); if (d < depth) { depth = d; outNormal.equals(tempNormal); } } } float dx,dy; dx = b.getCenter().x - a.getCenter().x; dy = b.getCenter().y - a.getCenter().y; float dot = Vector2D.dot(dx,dy,outNormal.x,outNormal.y); if(dot > 0) { outNormal.x = -outNormal.x; outNormal.y = -outNormal.y; } return depth; } public Vector2D getMoveDeltaVec() { return deltaVec; } }; Thanks!

    Read the article

  • Can I install two Ubuntu versions on the same machine?

    - by Abh
    Hello, I have Ubuntu 10.10 32 bit already installed on my machine..I am using MongoDB and it does not work properly with 32 bit machine. So I want to install 64 bit Ubuntu 10.10 on my system on another partition (so that I can have both 32 bit and 64 bit versions). Is it okay to install both 32 bit and 64 bit? I mean will it give any problems? On which partition should I install the 64 bit version? My partitions are as follows: Filesystem Size Used Avail Use% Mounted on /dev/sda1 37G 11G 25G 30% / none 1.4G 260K 1.4G 1% /dev none 1.4G 776K 1.4G 1% /dev/shm none 1.4G 244K 1.4G 1% /var/run none 1.4G 0 1.4G 0% /var/lock /dev/sda6 129G 73G 50G 60% /home /dev/sda7 127G 76G 45G 64% /vol Waiting for your replies.

    Read the article

  • Why does my Grub have two entries for Windows?

    - by Tomas Lycken
    I have a dual boot system with Ubuntu 12.04 and Windows 7, using GRUB2 (with Burg) as boot loader. For some reason, the Windows installation shows up twice in the boot menu: Ubuntu GNU/Linux, with Linux 3.2.0-24-generic Ubuntu GNU/Linux, with Linux 3.2.0-24-generic (recovery mode) Windows 7 (loader) (on /dev/sda1) Windows 7 (loader) (on /dev/sda2) If I look in my partition table, /dev/sda2 is C:\ of the Windows installation, and /dev/sda1 is the "System Reserved" partition (which, IIRC, is Windows' own bootloader). Furthermore, gparted shows /dev/sda2 - but no other partitions - with a boot flag: What is going on here? I'd like to have only the entries for Ubuntu and one entry for Windows in my boot menu - how do I remove one of them?

    Read the article

  • Kernel Panic: Not booting after upgrade from 10.04 to 12.04

    - by Jitesh
    I upgraded from 10.04 to 12.04LTS. Upgrade went fine, even restarted couple of times. Then the next day while booting into Ubuntu, after the grub, it gave the error Kernel panic : not syncing vfs unable to mount root fs on unknown block (0,0). I then booted into live CD and tried the following commands, based on other posts on this forum: sudo fdisk -l As the 8 was on /dev/sda1, sudo mount /dev/sda1 /mnt sudo mount --bind /dev /mnt/dev Now I got the message: mount: mount point /mnt/dev does not exist Then tried sudo mount --bind /proc /mnt/proc Again got the message: mount point point /mnt/proc does not exist. then tried sudo chroot /mnt Got message: chroot: failed to run comman '/bin/bash': No such file or directory Now have no clue what to do next. Unable to boot into Ubuntu. Please help. Jitesh

    Read the article

  • Can't remove the libpcap0.8 package

    - by Yogesh
    I am getting error when running apt-get remove root@System:~/Downloads# sudo apt-get remove The following packages have unmet dependencies: libpcap0.8 : Breaks: libpcap0.8:i386 (!= 1.4.0-2) but 1.5.3-2 is installed libpcap0.8:i386 : Breaks: libpcap0.8 (!= 1.5.3-2) but 1.4.0-2 is installed libpcap0.8-dev : Depends: libpcap0.8 (= 1.5.3-2) but 1.4.0-2 is installed E: Unmet dependencies. Try using -f. and when I ran apt-get remove -f this is what happens: root@System:~/Downloads# sudo apt-get remove -f The following extra packages will be installed: libpcap0.8 The following packages will be upgraded: libpcap0.8 1 upgraded, 0 newly installed, 0 to remove and 365 not upgraded. 2 not fully installed or removed. Need to get 0 B/110 kB of archives. After this operation, 13.3 kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 163539 files and directories currently installed.) Preparing to unpack .../libpcap0.8_1.5.3-2_amd64.deb ... Unpacking libpcap0.8:amd64 (1.5.3-2) over (1.4.0-2) ... dpkg: error processing archive /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb (--unpack): trying to overwrite shared '/usr/share/man/man7/pcap-filter.7.gz', which is different from other instances of package libpcap0.8:amd64 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for man-db (2.6.7.1-1) ... Errors were encountered while processing: /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) root@System:~/Downloads# clear root@System:~/Downloads# sudo apt-get remove -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libpcap0.8 The following packages will be upgraded: libpcap0.8 1 upgraded, 0 newly installed, 0 to remove and 365 not upgraded. 2 not fully installed or removed. Need to get 0 B/110 kB of archives. After this operation, 13.3 kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 163539 files and directories currently installed.) Preparing to unpack .../libpcap0.8_1.5.3-2_amd64.deb ... Unpacking libpcap0.8:amd64 (1.5.3-2) over (1.4.0-2) ... dpkg: error processing archive /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb (--unpack): trying to overwrite shared '/usr/share/man/man7/pcap-filter.7.gz', which is different from other instances of package libpcap0.8:amd64 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for man-db (2.6.7.1-1) ... Errors were encountered while processing: /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) root@System:~/Downloads# root@System:~/Downloads# sudo apt-get check Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libpcap0.8 : Breaks: libpcap0.8:i386 (!= 1.4.0-2) but 1.5.3-2 is installed libpcap0.8:i386 : Breaks: libpcap0.8 (!= 1.5.3-2) but 1.4.0-2 is installed libpcap0.8-dev : Depends: libpcap0.8 (= 1.5.3-2) but 1.4.0-2 is installed E: Unmet dependencies. Try using -f. root@System:~/Downloads# apt-cache policy libpcap0.8:amd64 libpcap0.8 libpcap0.8-dev libpcap0.8: Installed: 1.4.0-2 Candidate: 1.5.3-2 Version table: 1.5.3-2 0 500 http://in.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages *** 1.4.0-2 0 100 /var/lib/dpkg/status libpcap0.8: Installed: 1.4.0-2 Candidate: 1.5.3-2 Version table: 1.5.3-2 0 500 http://in.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages *** 1.4.0-2 0 100 /var/lib/dpkg/status libpcap0.8-dev: Installed: 1.5.3-2 Candidate: 1.5.3-2 Version table: *** 1.5.3-2 0 500 http://in.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages 100 /var/lib/dpkg/status root@System:~/Downloads# root@System:~/Downloads# sudo apt-get -f remove libpcap0.8 libpcap0.8-dev libpcap0.8-dev:i386 libpcap0.8:i386 Reading package lists... Done Building dependency tree Reading state information... Done Package 'libpcap0.8-dev:i386' is not installed, so not removed. Did you mean 'libpcap0.8-dev'? You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: libpcap-dev : Depends: libpcap0.8-dev but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). root@System:~/Downloads# sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libpcap0.8 The following packages will be upgraded: libpcap0.8 1 upgraded, 0 newly installed, 0 to remove and 365 not upgraded. 2 not fully installed or removed. Need to get 0 B/110 kB of archives. After this operation, 13.3 kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 163539 files and directories currently installed.) Preparing to unpack .../libpcap0.8_1.5.3-2_amd64.deb ... Unpacking libpcap0.8:amd64 (1.5.3-2) over (1.4.0-2) ... dpkg: error processing archive /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb (--unpack): trying to overwrite shared '/usr/share/man/man7/pcap-filter.7.gz', which is different from other instances of package libpcap0.8:amd64 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for man-db (2.6.7.1-1) ... Errors were encountered while processing: /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) root@System:~/Downloads#

    Read the article

  • Bridged virtual interface is not available or visible to ifconfig.

    - by Omniwombat
    Hello all. I'm running Ubuntu 9.04, kernel 2.6.28-18, and vmware-server 2.0.1. I'm attempting to setup a virtual linux machine to use a bridged interface rather than NAT or host-only. Both NAT and host-only work just fine. When running vmware-config.pl, I set /dev/vmnet0 to bridge eth0, /dev/vmnet1 to host-only, and /dev/vmnet8 to NAT. When I run ifconfig -a I see the physical interface (eth0), vmnet1 and vmnet8 both of which are up and have IP addresses assigned to them. I also see other various interfaces that are not relevant here. In the web console, when I ask that the guest machine's network card be bridged, it states that a bridged setup is "Not available" and shows the disabled device icon. Inside the guest machine, I do have an eth0 interface which I can set to anything I like, however it can't see my external network, or the host. I do see errors in my vmware/hostd.log which state: "The network bridge on device vmnet0 is not running. The virtual machine will not be able to communicate with the host or with other machines on your network" which confirms the problem. vmnet-bridge is running, and I see the following in my process table: /usr/bin/vmnet-bridge -d /var/run/vmnet-bridge-0.pid -n 0 -i eth0 I confirm that the /var/run/vmnet-bridge-0.pid file is there and that it points to the correct process. I saw this question relating to Ubuntu 9.04 and bridged interfaces, in which the poster determined that the vsock library was not getting built due to a flaw in the vmware-config.pl script. I applied the patch, reran the script, and confirm that vsock.ko and vsock.o are in my /lib directory structure. vsock does show up in an lsmod. My /etc/vmware directory has /vmnet1 and /vmnet8 subdirectories. They contain configuration utilities for running DHCP and nat type services as expected. There is no vmnet0 subdirectory. My /etc/vmware/netmap.conf file DOES show entries for vmnet0; both the name and the device as I configured it from the script. My /dev directory contains devices vmnet0 through vmnet9. They have major device number 119, and minor device numbers 0 through 9. /proc/net/dev shows statistics for vmnet1 and vmnet8, but not vmnet0. I have a /proc/vmnet directory, but it's empty. When I start or stop the vmware service with /etc/init.d/vmware start, I see the following: Starting VMware services: Virtual machine monitor done Virtual machine communication interface done VM communication interface socket family: done Virtual ethernet done Bridged networking on /dev/vmnet0 done Host-only networking on /dev/vmnet1 (background) done DHCP server on /dev/vmnet1 done Host-only networking on /dev/vmnet8 (background) done DHCP server on /dev/vmnet8 done NAT service on /dev/vmnet8 done VMware Server Authentication Daemon (background) done Shared Memory Available done Starting VMware management services: VMware Server Host Agent (background) done VMware Virtual Infrastructure Web Access Starting VMware autostart virtual machines: Virtual machines done Nothing appears to be wrong there. What n00b thing am I doing such that vmnet0 and only vmnet0 does not show up in the interface list?

    Read the article

  • Grub bootloader goes fail to boot in dual boot system after installing Ubuntu 12.10

    - by K.K Patel
    I had 12.04 with my dual boot system. Yesterday I downloaded Ubuntu 12.10 make bootable USB and choose Upgrade option in Installer. After installation Grub failed to boot my machine. I tried following to fix grub bootloder . Same problem I fixed with Ubuntu 12.04 using live USB but this solution not work for Ubuntu 12.10. Now coming at exactly where this solution goes fail. I followed this steps after booting Live USB and opening terminal. 1) sudo fdisk -l to see where Linux is installed 2) sudo mount /dev/sda9 /mnt where sda9 is my linux partition 3) sudo mount /dev/sda9 /mnt/boot 4) sudo mount --bind /dev /mnt/dev 5) sudo chroot /mnt (No problems with this steps done perfectly) 6) grub-install /dev/sda when I type command I got error that source_dir doesn't exist Please specify --target or --directory How can I solve this ?

    Read the article

  • Error when trying to get movies off my Camera

    - by matt wilkie
    How do I retrieve movies and audio files from my Canon PowerShot S5 IS camera? Shotwell only sees the pictures. Mounting the camera via "Places Canon Digital Camera" and then clicking twice on the resulting desktop icon yields this error: could not display "gphoto2://[usb:001,002]/" There is nothing in /media. update: output of sudo fdisk -l Disk /dev/sda: 40.0 GB, 40007761920 bytes 255 heads, 63 sectors/track, 4864 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x3ee33ee2 Device Boot Start End Blocks Id System /dev/sda1 2364 2612 1999872 82 Linux swap / Solaris /dev/sda2 * 1 2364 18979840 83 Linux /dev/sda3 2613 4864 18089159+ f W95 Ext'd (LBA) /dev/sda5 2613 4864 18089158+ b W95 FAT32 Partition table entries are not in disk order Solution: install gphotofs, then Nautilus shows camera contents similar to a standard usb storage device (though note that gphotofs does not yet support adding to or deleting contents).

    Read the article

  • How to access photos from my Genius G-Shot P7545 camera?

    - by Florin
    I have a Genius G-Shot P7545 camera. In Windows I had just to plug in the camera to the usb and acces it like a usb stick. I tried to do that in Ubuntu 10.10 with no result. How can I acces the photots? With these comands I get: lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 015: ID 0784:1692 Vivitar, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xcf5acf5a Device Boot Start End Blocks Id System /dev/sda1 * 1 2550 20478976 83 Linux /dev/sda3 2550 19458 135810048 f W95 Ext'd (LBA) /dev/sda5 2550 19458 135809024 83 Linux Unable to read /dev/sdb

    Read the article

  • Ubuntu Server 13.04.3 doesn't boot w/ EFI

    - by user1004816
    I'm was actually trying to install Debian Wheezy (which failed horribly), then tried Ubuntu Server 13.04 and got the exact same problems as w/ Debian: After installing, the system doesn't show any boot-selection and tells me "Missing operating system". My setup is pretty simple: /dev/sdc - 1TB HDD (+ 3 other NTFS HDD) /dev/sdc1 - EFI, 100MiB, bootable /dev/sdc4 - ext4, 65GiB, Ubuntu/Debian (sdc2 & 3 are NTFS w/ data. Sorta lacking SATA-ports, therefore no OS-only HDD/SSD) Grub seems to be installed on /dev/sdc4, /dev/sdc1 only contains a "EFI"-folder. Not sure if thats correct. I used UNetbootin on OS X to make an 8GB USB-drive bootable and used the standard amd64-iso, running a perl-script wich eradicates a couple of naming-errors (different story). Using this tutorial and actually disabling UEFI and using legacy only dind't work either, the usb drive dind't even bother to boot. I'm pretty clueless here. I'd just like to install and use either Debian oder Ubuntu Server!

    Read the article

  • Switch from encrypted partition to unencrypted (Error: cryptsetup: evms_activate is not available)

    - by Chris Lercher
    I initially installed Ubuntu 11.04 with an encrypted file system (from the alternate install CD: Guided Partitioning, LVM encrypted). Now I wanted to change this setup to have my root file system on an unencrypted partition. I had the following setup before: /dev/mapper/my-root on / type ext4 (rw,noatime,errors=remount-ro,commit=0,commit=0) /dev/sda1 on /boot type ext2 (rw,noatime) I backed up /, reformatted /dev/sda5 (which had contained the encrypted LVM device) to an ext3 partition, and restored / to that partition. I edited /etc/fstab, removed the line /dev/mapper/my-root / ..., and added the line: /dev/sda5 / ext3 noatime,rw,errors=remount-ro,commit=0 0 1 I edited /etc/crypttab, and commented out the single entry. On reboot, I get the grub screen as usual, but then I get the message cryptsetup:evms_activate is not available, waiting for encrypted source device. I tried reinstalling Grub2 using a LiveCD with the ChRoot method, but that didn't make any difference. Why is Ubuntu still searching for an encrypted device?

    Read the article

  • Can't see my partitions after grub recovery

    - by dimbo
    I stupidly inserted the windows CD into my dual boot Ubuntu 11.10 / windows xp system. I just wanted to see if I could install windows on my external usb HD, but didn't actually go ahead with the install. It seems like the windows CD messed up my MBR and I had to use boot-repair and the ubuntu 11.10 live CD to gain access to ubuntu again. It seems to boot up a little differently (slower) but works. However, I now cant see any of my partitions in nautilus (there are 3). When I open gparted, it just shows my whole hard drive as unallocated (I know it has a windows partition that works and my ubuntu partition that I am using now). If I insert a usb pen, it is also not visible in nautilus but in gparted shows up as a FAT32 partition (which is correct although I cannot access it). sudo fdisk -l gives the following : demian@dimbo-TP:~$ sudo fdisk -l [sudo] password for demian: omitting empty partition (5) Disk /dev/sda: 320.1 GB, 320072933376 bytes 240 heads, 63 sectors/track, 41345 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x877b877b Device Boot Start End Blocks Id System /dev/sda1 * 63 63842309 31921123+ 7 HPFS/NTFS/exFAT /dev/sda2 63844350 133484084 34819867+ 5 Extended /dev/sda3 127636488 133484084 2923798+ 82 Linux swap / Solaris /dev/sda4 133484085 625137344 245826630 83 Linux /dev/sda5 63844352 123445247 29800448 83 Linux /dev/sda6 123447296 127635455 2094080 82 Linux swap / Solaris Disk /dev/sdb: 8100 MB, 8100249600 bytes 12 heads, 40 sectors/track, 32960 cylinders, total 15820800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 5992 15820799 7907404 c W95 FAT32 (LBA) Here is my grub.conf file. Like I said before, I had to use the 'boot-repair' utility with the live cd to get grub working again. I think that this utility maybe created a new grub for me because the startup is definitely not the same. The screen goes blank for a while, and then the ubuntu loading dots come up for a brief moment (instead of during the whole startup process) before the dektop is displayed. Anyway : # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux /boot/vmlinuz-3.0.0-12-generic root=UUID=5349ff67-b7b7-489f-a881-ae49c1dcd84a ro quiet splash vt.handoff=7 initrd /boot/initrd.img-3.0.0-12-generic } menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a echo 'Loading Linux 3.0.0-12-generic ...' linux /boot/vmlinuz-3.0.0-12-generic root=UUID=5349ff67-b7b7-489f-a881-ae49c1dcd84a ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-12-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Microsoft Windows XP Professional (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 72A89361A89322A1 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### How can I get things back to normal. Thanks, Demian.

    Read the article

  • Subdomain redirects to different server, maintaining original URL

    - by Jason Baker
    I just took over the webmaster position in my organization, and I'm trying to set up a development environment separate from the production environment. The two environments are hosted with different companies, both on shared hosting plans. Right now, production is at domain.com and development is at domain2.com What I want is to direct my development team to dev.domain.com More importantly, I don't want the URL to change from dev.domain.com back to domain2.com, but I also be responsive to page changes. For example, if my dev team navigates from dev.domain.com to a page (called "page"), I'd like the URL to show as dev.domain.com/page Is this possible, or am I just dreaming?

    Read the article

  • Mounting ntfs windows drive and retrieving its data

    - by Sarmad
    Hej, A friend gave me his laptop which had problems with booting (windows). He claims his data on the drive to be retrieved and saved. I have Linux Ubuntu Server to mount its hard drive and check the contents. Now when I have mounted it I see only boot.sdi, sources, System Volume Information I have no idea why is it so? How can I access and retrieve the contents? results of sudo fdisk -l are as follows: Enhet Start Början Slut Block Id System /dev/sdb1 2048 3074047 1536000 27 Hidden NTFS WinRE /dev/sdb2 * 3074048 246945791 121935872 7 HPFS/NTFS/exFAT /dev/sdb3 246945792 416354295 84704252 7 HPFS/NTFS/exFAT /dev/sdb4 416354304 488394751 36020224 f W95 Utökad (LBA) /dev/sdb5 416356352 488394751 36019200 7 HPFS/NTFS/exFAT Please help me in this regard.

    Read the article

  • Reconstructing the disk order in RAID 6 with 7 disks

    - by rkotulla
    a little background to this question first: I am running a RAID-6 within a QNAP TS869L external RAID/NAS system. I started with 5 disks of 3 TB each back in the day, and later added another 2 disks of 3TB to the RAID. The QNAP internals handled the growing and re-syncing etc, and everything seemd to be perfectly fine. About 2 weeks ago, I had one of the disks (disk #5, disk #2 has gone bad in the mean time) fail, and somehow (I have no idea why), also disks 1 and 2 got kicked out of the array. I replaced disk #5, but the RAID didn't start working again. After some calls to QNAP technical support, they re-created the array (using mdadm --create --force --assume-clean ...), but the resulting array couldn't find a filesystem, and I was kindly referred to contact a data recovery company that I can't afford. After some digging through old log files, resetting the disk to factory default, etc, I found a few errors that were made during this re-create - I wish I still had some of the original metadata, but unfortunately i don't (I definitely learned that lesson). I'm currently at the point where I know the correct chunk-size (64K), metadata-version (1.0; factory default was 0.9, but from what I read 0.9 doesn't handle disks over 2 TB, mine are 3 TB), and I now find the ext4 filesystem that should be on the disks. Only variable left to determine is the right disk order! I started using the description found in answer #4 of "Recover RAID 5 data after created new array instead of re-using" but am a little confused on what the order should be for a proper RAID-6. RAID-5 is pretty well documented in a number of places, but RAID-6 much less so. Also, does the layout, i.e. distribution of parity and data chunks across the disks, change after the growing of the array from 5 to 7 disks, or does the re-sync re-organize them in such a way a native 7-disk RAID-6 would have been? Thanks some more mdadm output that might be helpful: mdadm version: [~] # mdadm --version mdadm - v2.6.3 - 20th August 2007 mdadm details from one of the disks in the array: [~] # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 1.0 Feature Map : 0x0 Array UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Name : 0 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Raid Devices : 7 Used Dev Size : 5857395112 (2793.02 GiB 2998.99 GB) Array Size : 29286975360 (13965.12 GiB 14994.93 GB) Used Size : 5857395072 (2793.02 GiB 2998.99 GB) Super Offset : 5857395368 sectors State : clean Device UUID : 7c572d8f:20c12727:7e88c888:c2c357af Update Time : Tue Jun 10 13:01:06 2014 Checksum : d275c82d - correct Events : 7036 Chunk Size : 64K Array Slot : 0 (0, 1, failed, 3, failed, 5, 6) Array State : Uu_u_uu 2 failed mdadm details for the array in the current disk-order (based on my best guess reconstructed from old log-files) [~] # mdadm --detail /dev/md0 /dev/md0: Version : 01.00.03 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Array Size : 14643487680 (13965.12 GiB 14994.93 GB) Used Dev Size : 2928697536 (2793.02 GiB 2998.99 GB) Raid Devices : 7 Total Devices : 5 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Jun 10 13:01:06 2014 State : clean, degraded Active Devices : 5 Working Devices : 5 Failed Devices : 0 Spare Devices : 0 Chunk Size : 64K Name : 0 UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Events : 7036 Number Major Minor RaidDevice State 0 8 3 0 active sync /dev/sda3 1 8 19 1 active sync /dev/sdb3 2 0 0 2 removed 3 8 51 3 active sync /dev/sdd3 4 0 0 4 removed 5 8 99 5 active sync /dev/sdg3 6 8 83 6 active sync /dev/sdf3 output from /proc/mdstat (md8, md9, and md13 are internally used RAIDs holding swap, etc; the one I'm after is md0) [~] # more /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md0 : active raid6 sdf3[6] sdg3[5] sdd3[3] sdb3[1] sda3[0] 14643487680 blocks super 1.0 level 6, 64k chunk, algorithm 2 [7/5] [UU_U_UU] md8 : active raid1 sdg2[2](S) sdf2[3](S) sdd2[4](S) sdc2[5](S) sdb2[6](S) sda2[1] sde2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdg4[3] sdf4[4] sde4[5] sdd4[6] sdc4[2] sdb4[1] sda4[0] 458880 blocks [8/7] [UUUUUUU_] bitmap: 21/57 pages [84KB], 4KB chunk md9 : active raid1 sdg1[6] sdf1[5] sde1[4] sdd1[3] sdc1[2] sda1[0] sdb1[1] 530048 blocks [8/7] [UUUUUUU_] bitmap: 37/65 pages [148KB], 4KB chunk unused devices: <none>

    Read the article

  • Grub2 with BURG: duplicate Windows entries, how do I remove one?

    - by Tomas Lycken
    I have a dual boot system with Ubuntu 12.04 and Windows 7, using GRUB2 (with Burg) as boot loader. For some reason, the Windows installation shows up twice in the boot menu: Ubuntu GNU/Linux, with Linux 3.2.0-24-generic Ubuntu GNU/Linux, with Linux 3.2.0-24-generic (recovery mode) Windows 7 (loader) (on /dev/sda1) Windows 7 (loader) (on /dev/sda2) If I look in my partition table, /dev/sda2 is C:\ of the Windows installation, and /dev/sda1 is the "System Reserved" partition (which, IIRC, is Windows' own bootloader). Furthermore, gparted shows /dev/sda2 - but no other partitions - with a boot flag: What is going on here? I'd like to have only the entries for Ubuntu and one entry for Windows in my boot menu - how do I remove one of them?

    Read the article

  • How to correctly set permisions for all subfolders and files

    - by Saeid87
    I am following the guide to install TinyOS on Ubuntu 12.04 I have done up to step 3, But I am not sure if I have done the step 3 correctly. Because by doing the step 4 I get the permission error : saeid@saeid-Satellite-C660:~$ tos-install-jni /usr/bin/tos-install-jni: 13: [: =: unexpected operator Installing 32-bit Java JNI code in /usr/lib/jvm/java-6-openjdk-i386/jre/lib/i386 ... install: cannot create regular file `/usr/lib/jvm/java-6-openjdk-i386/jre/lib/i386/libgetenv.so': Permission denied Can you please tell me what would be the actual commands for step 3? What I have to replace with following lines?: /opt/tinyos-2.x files: chown -R /opt/tinyos-2.x Change the permissions on any serial (/dev/ttyS), usb (/dev/tts/usb, /dev/ttyUSB), or parallel (/dev/parport) devices you are going to use: chmod 666 /dev/ I mean how would you do those steps in your ubuntu?

    Read the article

  • Ubiquity is not recognizing existing partition while trying to install Ubuntu alongside Windows 7

    - by Bertner
    So I'm using Ubuntu live CD to install Ubuntu next to Windows 7 but it doesn't recognize partitions. Here is sudo fdisk -l: Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0c7a859b Device Boot Start End Blocks Id System /dev/sda1 63 1250259631 625129784+ f W95 Ext'd (LBA) Partition 1 does not start on physical sector boundary. /dev/sda2 * 81920 4177919 2048000 b W95 FAT32 /dev/sda3 4177920 147535871 71678976 7 HPFS/NTFS/exFAT /dev/sda5 147538608 1147859631 500160512 7 HPFS/NTFS/exFAT I have one partition with Windows 7, one with its created partition (OS) and one for data.

    Read the article

  • Unable to mount Windows (NTFS) filesystem due to hibernation

    - by yotamoo
    Whenever I boot Ubuntu, I get a message that it cannot mount my windows partition, and I can choose to either wait, skip or manually mount. When I try to enter my Windows partition through Nautilus I get a message saying that this partition is hibernated and that I need to enter the file system and properly close it, something I have done with no problem so I don't know why this happens. Here's my partition table, if any more data is needed please let me know. Device Boot Start End Blocks Id System /dev/sda1 2048 20000767 9999360 83 Linux /dev/sda2 20002814 478001151 228999169 5 Extended /dev/sda3 * 478001152 622532607 72265728 7 HPFS/NTFS/exFAT /dev/sda4 622532608 625141759 1304576 82 Linux swap / Solaris /dev/sda5 20002816 478001151 228999168 83 Linux

    Read the article

  • cryptsetup partitions not detected at boot

    - by Luis
    I installed a fresh 12.04 and tried to mimic what I had for 10.04. swap should be encrypted with a urandom key and there's another partition that will contain home and other directories. # cat /etc/crypttab | grep -v '^#' | grep -v '^$' cryptswap /dev/sda5 /dev/urandom swap encriptado /dev/sda6 # grep -e 'cryptswap' -e 'encriptado' /etc/fstab /dev/mapper/cryptswap swap swap defaults 0 0 /dev/mapper/encriptado /encriptado ext4 defaults 0 0 I also apt-get install cryptsetup When I boot, the system says (try to translate) that either the partition is not found or is not ready. I should wait, press M for manual or S to jump over. What am I missing here?

    Read the article

  • CentOS Client - Unable to Establish iSCSI connection with multiple interfaces on the initiator

    - by slashdot
    So after upgrading to CentOS 6.2, I am seemingly no longer able to login into my iSCSI targets. I have multiple interfaces on different subnets on the system, and I first thought that it had to do with the fact that I may not be binding correct interfaces, which seems to be the case when looking at netstat, as this is clearly wrong: [root]? netstat -na|grep .90 tcp 0 1 10.10.100.60:42354 10.10.8.90:3260 SYN_SENT tcp 0 1 10.10.100.60:40777 10.10.9.90:3260 SYN_SENT I then went ahead and disabled all but one interface, and so as a result netstat appears to be correct, but the issue with login remains. I am positive that the target never sees a packet, because I see nothing by SYN_SENT. I know the problem is on my client, because the target is servicing multiple systems, none of which are CentOS 6.2. At this point I am pretty confident that some things changed between CentOS 6.0/6.1 and 6.2. So, if anyone have any thoughts, or ran into this, I would very much like to hear your thoughts. [root]? iscsiadm --mode node --targetname iqn.2011-12.dom.homer:01:lab-centos-servers-00001 --portal 10.10.8.90:3260,2 --interface=sw-iscsi-0 --login Logging in to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260] (multiple) iscsiadm: Could not login to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not log into all portals [root]? netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.10.8.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2.7 10.10.9.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3.7 10.10.100.0 0.0.0.0 255.255.252.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2.7 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3.7 0.0.0.0 10.10.100.1 0.0.0.0 UG 0 0 0 eth0 Output of ip addr show for the two interfaces involved: [root]? for i in 2.7 3.7; do ip addr show eth$i; done 6: eth2.7@eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:0c:29:94:5b:8d brd ff:ff:ff:ff:ff:ff inet 10.10.8.60/24 brd 10.10.8.255 scope global eth2.7 inet6 fe80::20c:29ff:fe94:5b8d/64 scope link valid_lft forever preferred_lft forever 7: eth3.7@eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:0c:29:94:5b:97 brd ff:ff:ff:ff:ff:ff inet 10.10.9.60/24 brd 10.10.9.255 scope global eth3.7 inet6 fe80::20c:29ff:fe94:5b97/64 scope link valid_lft forever preferred_lft forever Update 01/06/2012: This issue is getting even more interesting by the day it seems. I went a few weeks back and grabbed a snapshot of this system from before upgrading to 6.2. I spun up a new system from the snapshot, and reconfigured interface info and host keys, as well as iSCSI initiator and iscsi interface info to match new MACs. Changed nothing else. Then, I attempted to connect to my targets, and no issues at all. I cannot say that this was unexpected. I then went ahead and compared sysctl settings from both systems and there were differences after the upgrade, but nothing seemingly relevant to iSCSI or IP that could contribute to this. I also noticed that by default now two sessions per connection were enabled after the upgrade, but I changed it back to 1 session in /etc/iscsi/iscsid.conf. On the problematic system we can see that source interface is seemingly wrong, but even when I disable the 10.10.100 interface, problems persist. So, while this may be relevant, I could not validate it for certain. Needless to say, further research is necessary. Something is clearly different between releases. Working system is on 6.1, and non-working is 6.2. ::Working System:: tcp 0 0 10.10.8.210:39566 10.10.8.90:3260 ESTABLISHED tcp 0 0 10.10.9.210:46518 10.10.9.90:3260 ESTABLISHED [root]? ip route show 10.10.8.0/24 dev eth2.6 proto kernel scope link src 10.10.8.210 10.10.9.0/24 dev eth3.7 proto kernel scope link src 10.10.9.210 10.10.100.0/22 dev eth0 proto kernel scope link src 10.10.100.210 169.254.0.0/16 dev eth0 scope link metric 1002 169.254.0.0/16 dev eth2.6 scope link metric 1006 169.254.0.0/16 dev eth3.7 scope link metric 1007 default via 10.10.100.1 dev eth0 ::Non-working System:: tcp 0 1 10.10.100.60:44737 10.10.9.90:3260 SYN_SENT tcp 0 1 10.10.100.60:55479 10.10.8.90:3260 SYN_SENT [root]? ip route show 10.10.8.0/24 dev eth2.6 proto kernel scope link src 10.10.8.60 10.10.9.0/24 dev eth3.7 proto kernel scope link src 10.10.9.60 10.10.100.0/22 dev eth0 proto kernel scope link src 10.10.100.60 169.254.0.0/16 dev eth0 scope link metric 1002 169.254.0.0/16 dev eth2.6 scope link metric 1006 169.254.0.0/16 dev eth3.7 scope link metric 1007 default via 10.10.100.1 dev eth0 And the result is still same: [root]? iscsiadm: Could not login to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not login to [iface: sw-iscsi-1, target: iqn.2011-12.dom.homer:02:lab-centos-servers-00001, portal: 10.10.9.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not log into all portals Update 01/08/2012: I believe I have been able to figure out the answer to my issue. It is quite obscure and I doubt this will happen to anyone else any time soon. It turns out that setting iface.iscsi_ifacename and iface.hwaddress in the interfaces configuration file is not legal. When one manually adds an iscsi target, such as below, all settings from the interface config file are copied into the node config file, that gets created by the below command. Result is parameters iface.iscsi_ifacename and iface.hwaddress together in the same config file. These parameters are seemingly mutually exclusive, which does not exactly make sense, or there is perhaps an oversight in the codepath. Perhaps I will investigate further. # iscsiadm -m node --op new -T iqn.2011-12.dom.homer:01:lab-centos-servers-00001 -p 10.10.8.90,3260,2 -I sw-iscsi-0 # iscsiadm -m node --op new -T iqn.2011-12.dom.homer:02:lab-centos-servers-00001 -p 10.10.9.90,3260,2 -I sw-iscsi-1 Notice, below I commented out iface.hwaddress and iface.ipaddress, after which I re-added targets, with same command as above. All works just fine. [root]? cat * # BEGIN RECORD 2.0-872.33.el6 iface.iscsi_ifacename = sw-iscsi-0 iface.net_ifacename = eth2.6 #iface.hwaddress = XX:XX:XX:XX:XX:XX #iface.ipaddress = 10.10.8.60 iface.transport_name = tcp iface.vlan_id = 6 iface.vlan_priority = 0 iface.iface_num = 0 iface.mtu = 0 iface.port = 0 # END RECORD # BEGIN RECORD 2.0-872.33.el6 iface.iscsi_ifacename = sw-iscsi-1 iface.net_ifacename = eth3.7 #iface.hwaddress = XX:XX:XX:XX:XX:XX #iface.ipaddress = 10.10.9.60 iface.transport_name = tcp iface.vlan_id = 7 iface.vlan_priority = 0 iface.iface_num = 0 iface.mtu = 0 iface.port = 0 # END RECORD Again, chances of this happening to someone else are slim to none, so likely waste of time typing this up. But, if someone does encounter this issue, I hope this post will help.

    Read the article

  • IntellIJ editor doesn't appear

    - by neveu
    I updated my IntellIJ install to the latest version (11.1.4) and now the Editor window doesn't appear. Double-clicking on the file, jump-to-source, nothing happens. No error message, it just doesn't appear. If I double-click on an xml layout file the preview window works, but no Editor window. Have installed and reinstalled; went back to an earlier version and it doesn't work there either. I'm at a loss. Any ideas? Update: Editor works if I create a new project. Update 2: idea.log file includes this (I don't know what ins.android.sdk.AndroidSdkData is): 2012-11-04 20:40:52,481 [ 2677] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $APP_CONFIG$/macros.xml file is null 2012-11-04 20:40:52,481 [ 2677] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $APP_CONFIG$/macros.xml 2012-11-04 20:40:52,482 [ 2678] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $APP_CONFIG$/quicklists.xml file is null 2012-11-04 20:40:52,482 [ 2678] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $APP_CONFIG$/quicklists.xml 2012-11-04 20:40:52,564 [ 2760] INFO - pl.stores.ApplicationStoreImpl - 76 application components initialized in 1285 ms 2012-11-04 20:40:52,575 [ 2771] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $APP_CONFIG$/customization.xml file is null 2012-11-04 20:40:52,575 [ 2771] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $APP_CONFIG$/customization.xml 2012-11-04 20:40:52,674 [ 2870] INFO - ij.openapi.wm.impl.IdeRootPane - App initialization took 3385 ms 2012-11-04 20:40:53,136 [ 3332] INFO - TestNG Runner - Create TestNG Template Configuration 2012-11-04 20:40:53,138 [ 3334] INFO - TestNG Runner - Create TestNG Template Configuration 2012-11-04 20:40:53,253 [ 3449] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/dynamic.xml file is null 2012-11-04 20:40:53,253 [ 3449] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/dynamic.xml 2012-11-04 20:40:53,280 [ 3476] INFO - api.vfs.impl.local.FileWatcher - 1 paths checked, 0 mapped, 202 mks 2012-11-04 20:40:53,366 [ 3562] INFO - ellij.project.impl.ProjectImpl - 137 project components initialized in 403 ms 2012-11-04 20:40:53,563 [ 3759] INFO - .module.impl.ModuleManagerImpl - 4 modules loaded in 197 ms 2012-11-04 20:40:53,625 [ 3821] INFO - api.vfs.impl.local.FileWatcher - 6 paths checked, 0 mapped, 150 mks 2012-11-04 20:40:54,187 [ 4383] INFO - .roots.impl.DirectoryIndexImpl - Directory index initialized in 271 ms, indexed 1611 directories 2012-11-04 20:40:54,207 [ 4403] INFO - pl.PushedFilePropertiesUpdater - File properties pushed in 18 ms 2012-11-04 20:40:54,237 [ 4433] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $APP_CONFIG$/plainTextFiles.xml file is null 2012-11-04 20:40:54,237 [ 4433] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $APP_CONFIG$/plainTextFiles.xml 2012-11-04 20:40:54,246 [ 4442] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/gant_config.xml file is null 2012-11-04 20:40:54,246 [ 4442] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/gant_config.xml 2012-11-04 20:40:54,253 [ 4449] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/gradle.xml file is null 2012-11-04 20:40:54,253 [ 4449] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/gradle.xml 2012-11-04 20:40:55,855 [ 6051] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/IntelliLang.xml file is null 2012-11-04 20:40:55,855 [ 6051] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/IntelliLang.xml 2012-11-04 20:40:56,995 [ 7191] INFO - leEditor.impl.EditorsSplitters - splitter 2012-11-04 20:40:56,996 [ 7192] INFO - leEditor.impl.EditorsSplitters - splitter 2012-11-04 20:40:57,233 [ 7429] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/codeStyleSettings.xml file is null 2012-11-04 20:40:57,233 [ 7429] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/codeStyleSettings.xml 2012-11-04 20:40:57,234 [ 7430] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/projectCodeStyle.xml file is null 2012-11-04 20:40:57,234 [ 7430] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/projectCodeStyle.xml 2012-11-04 20:40:58,145 [ 8341] INFO - indexing.UnindexedFilesUpdater - Indexable files iterated in 3911 ms 2012-11-04 20:40:58,146 [ 8342] INFO - indexing.UnindexedFilesUpdater - Unindexed files update started: 0 files to update 2012-11-04 20:40:58,146 [ 8342] INFO - indexing.UnindexedFilesUpdater - Unindexed files update done in 0 ms 2012-11-04 20:40:58,362 [ 8558] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/fileColors.xml file is null 2012-11-04 20:40:58,362 [ 8558] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/fileColors.xml 2012-11-04 20:41:00,420 [ 10616] INFO - ins.android.sdk.AndroidSdkData - For input string: "20.0.1" java.lang.NumberFormatException: For input string: "20.0.1" at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48) at java.lang.Integer.parseInt(Integer.java:458) at java.lang.Integer.parseInt(Integer.java:499) at org.jetbrains.android.sdk.AndroidSdkData.parsePackageRevision(AndroidSdkData.java:86) at org.jetbrains.android.sdk.AndroidSdkData.<init>(AndroidSdkData.java:73) at org.jetbrains.android.sdk.AndroidSdkData.parse(AndroidSdkData.java:167) at org.jetbrains.android.sdk.AndroidPlatform.parse(AndroidPlatform.java:83) at org.jetbrains.android.sdk.AndroidSdkAdditionalData.getAndroidPlatform(AndroidSdkAdditionalData.java:119) at org.jetbrains.android.facet.AndroidFacet.addResourceFolderToSdkRootsIfNecessary(AndroidFacet.java:532) at org.jetbrains.android.facet.AndroidFacet.access$500(AndroidFacet.java:103) at org.jetbrains.android.facet.AndroidFacet$3.run(AndroidFacet.java:440) at com.intellij.ide.startup.impl.StartupManagerImpl$6.run(StartupManagerImpl.java:230) at com.intellij.ide.startup.impl.StartupManagerImpl.runActivities(StartupManagerImpl.java:203) at com.intellij.ide.startup.impl.StartupManagerImpl.access$100(StartupManagerImpl.java:41) at com.intellij.ide.startup.impl.StartupManagerImpl$4.run(StartupManagerImpl.java:170) at com.intellij.openapi.project.DumbServiceImpl.updateFinished(DumbServiceImpl.java:213) at com.intellij.openapi.project.DumbServiceImpl.access$1000(DumbServiceImpl.java:51) at com.intellij.openapi.project.DumbServiceImpl$IndexUpdateRunnable$1$3.run(DumbServiceImpl.java:363) at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209) at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:702) at java.awt.EventQueue.access$400(EventQueue.java:82) at java.awt.EventQueue$2.run(EventQueue.java:663) at java.awt.EventQueue$2.run(EventQueue.java:661) at java.security.AccessController.doPrivileged(Native Method) at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87) at java.awt.EventQueue.dispatchEvent(EventQueue.java:672) at com.intellij.ide.IdeEventQueue.defaultDispatchEvent(IdeEventQueue.java:699) at com.intellij.ide.IdeEventQueue._dispatchEvent(IdeEventQueue.java:538) at com.intellij.ide.IdeEventQueue._dispatchEvent(IdeEventQueue.java:420) at com.intellij.ide.IdeEventQueue.dispatchEvent(IdeEventQueue.java:378) at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:296) at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:211) at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:201) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:196) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:188) at java.awt.EventDispatchThread.run(EventDispatchThread.java:122) 2012-11-04 20:41:00,459 [ 10655] INFO - ins.android.sdk.AndroidSdkData - For input string: "20.0.1" java.lang.NumberFormatException: For input string: "20.0.1" at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48) at java.lang.Integer.parseInt(Integer.java:458) at java.lang.Integer.parseInt(Integer.java:499) at org.jetbrains.android.sdk.AndroidSdkData.parsePackageRevision(AndroidSdkData.java:86) at org.jetbrains.android.sdk.AndroidSdkData.<init>(AndroidSdkData.java:73) at org.jetbrains.android.sdk.AndroidSdkData.parse(AndroidSdkData.java:167) at org.jetbrains.android.sdk.AndroidPlatform.parse(AndroidPlatform.java:83) at org.jetbrains.android.sdk.AndroidSdkAdditionalData.getAndroidPlatform(AndroidSdkAdditionalData.java:119) at org.jetbrains.android.facet.AndroidFacet.addResourceFolderToSdkRootsIfNecessary(AndroidFacet.java:532) at org.jetbrains.android.facet.AndroidFacet.access$500(AndroidFacet.java:103) at org.jetbrains.android.facet.AndroidFacet$3.run(AndroidFacet.java:440) at com.intellij.ide.startup.impl.StartupManagerImpl$6.run(StartupManagerImpl.java:230) at com.intellij.ide.startup.impl.StartupManagerImpl.runActivities(StartupManagerImpl.java:203) at com.intellij.ide.startup.impl.StartupManagerImpl.access$100(StartupManagerImpl.java:41) at com.intellij.ide.startup.impl.StartupManagerImpl$4.run(StartupManagerImpl.java:170) at com.intellij.openapi.project.DumbServiceImpl.updateFinished(DumbServiceImpl.java:213) at com.intellij.openapi.project.DumbServiceImpl.access$1000(DumbServiceImpl.java:51) at com.intellij.openapi.project.DumbServiceImpl$IndexUpdateRunnable$1$3.run(DumbServiceImpl.java:363) at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209) at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:702) at java.awt.EventQueue.access$400(EventQueue.java:82) at java.awt.EventQueue$2.run(EventQueue.java:663) at java.awt.EventQueue$2.run(EventQueue.java:661) at java.security.AccessController.doPrivileged(Native Method) at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87) at java.awt.EventQueue.dispatchEvent(EventQueue.java:672) at com.intellij.ide.IdeEventQueue.defaultDispatchEvent(IdeEventQueue.java:699) at com.intellij.ide.IdeEventQueue._dispatchEvent(IdeEventQueue.java:538) at com.intellij.ide.IdeEventQueue._dispatchEvent(IdeEventQueue.java:420) at com.intellij.ide.IdeEventQueue.dispatchEvent(IdeEventQueue.java:378) at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:296) at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:211) at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:201) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:196) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:188) at java.awt.EventDispatchThread.run(EventDispatchThread.java:122) 2012-11-04 20:41:01,305 [ 11501] INFO - tor.impl.FileEditorManagerImpl - Project opening took 8374 ms 2012-11-04 20:41:01,719 [ 11915] INFO - dom.attrs.AttributeDefinitions - Found tag with unknown parent: AndroidManifest.AndroidManifestCompatibleScreens 2012-11-04 20:41:07,522 [ 17718] INFO - roid.compiler.tools.AndroidApt - [/Users/neveu/Dev/android-sdk-macosx/platform-tools/aapt] [package] [-m] [--non-constant-id] [-J] [/private/var/folders/xb/hg6cdxt51rs8lylmmjw0fk8m0000gp/T/android_apt_autogeneration6157451500950136901tmp] [-M] [/Users/neveu/Dev/magic_android/3rdParty/facebook/AndroidManifest.xml] [-S] [/Users/neveu/Dev/magic_android/3rdParty/facebook/res] [-I] [/Users/neveu/Dev/android-sdk-macosx/platforms/android-14/android.jar] 2012-11-04 20:41:08,706 [ 18902] INFO - roid.compiler.tools.AndroidApt - [/Users/neveu/Dev/android-sdk-macosx/platform-tools/aapt] [package] [-m] [-J] [/private/var/folders/xb/hg6cdxt51rs8lylmmjw0fk8m0000gp/T/android_apt_autogeneration3143184519400737414tmp] [-M] [/Users/neveu/Dev/magic_android/AndroidManifest.xml] [-S] [/Users/neveu/Dev/magic_android/res] [-I] [/Users/neveu/Dev/android-sdk-macosx/platforms/android-15/android.jar] 2012-11-04 20:41:08,763 [ 18959] INFO - roid.compiler.tools.AndroidIdl - [/Users/neveu/Dev/android-sdk-macosx/platform-tools/aidl] [-p/Users/neveu/Dev/android-sdk-macosx/platforms/android-15/framework.aidl] [-I/Users/neveu/Dev/magic_android/magic/src] [-I/Users/neveu/Dev/magic_android/src] [-I/Users/neveu/Dev/magic_android/3rdParty/Tapjoy] [-I/Users/neveu/Dev/magic_android/gen] [/Users/neveu/Dev/magic_android/src/com/android/vending/billing/IMarketBillingService.aidl] [/Users/neveu/Dev/magic_android/gen/com/android/vending/billing/IMarketBillingService.java] 2012-11-04 20:41:14,004 [ 24200] INFO - dom.attrs.AttributeDefinitions - Found tag with unknown parent: AndroidManifest.AndroidManifestCompatibleScreens 2012-11-04 20:41:18,781 [ 28977] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $APP_CONFIG$/cachedDictionary.xml file is null 2012-11-04 20:41:18,782 [ 28978] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $APP_CONFIG$/cachedDictionary.xml

    Read the article

  • Wamp Server: Multiple Virtual Hosts are not working on Windows.

    - by Awan
    I have two virtual hosts on windows(for example: test1.dev and test2.dev). But it always load content of test1.dev for both virtual hosts. Following are my files: hosts: 127.0.0.1 localhost 127.0.0.1 test1.dev 127.0.0.1 test2.dev httpd.conf: <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> Include "c:/wamp/alias/*" <VirtualHost 127.0.0.1> ServerName test1.dev DocumentRoot "C:\wamp\www\test1\public" </VirtualHost> <VirtualHost 127.0.0.1> ServerName test2.dev DocumentRoot "C:\wamp\www\test2\public" </VirtualHost> Can someone recognize the problem ?

    Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >