Search Results

Search found 3028 results on 122 pages for 'urls'.

Page 47/122 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

  • How do I grant anonymous access to a url using FormsAuthentication?

    - by Brian Bolton
    For the most part, my webapp requires authentication to do anything. There are a few pages, namely the homepage, that I'd like people to be able to access without authenticating. Specifically, I'd like to allow anonymous access to these urls: /home /default.aspx I'm using asp.net MVC and FormsAuthentication. Both urls point to the same view: /home/index.aspx Here is my current configuration in web.config. <authentication mode="Forms"> <forms loginUrl="~/Account/LogOn" timeout="2880" /> </authentication> <authorization> <deny users="?" /> </authorization> Reading the documentation for the authorization tag, it says "Configures the authorization for a Web application, controlling client access to URL resources." It seems like I should be able to use the authorization tag to specify a url and allow access. Something like: <authentication mode="Forms"> <forms loginUrl="~/Account/LogOn" timeout="2880" /> </authentication> <authorization> <deny users="?" /> </authorization> <authorization url="/default.aspx"> <allow users="?" /> </authorization> <authorization url="/home"> <allow users="?" /> </authorization>

    Read the article

  • Selenium RC: how to capture/handle error?

    - by KenBurnsFan1
    Hi, My test uses Selenium to loop through a CSV list of URLs via an HTTP proxy (working script below). As I watch the script run I can see about 10% of the calls produce "Proxy error: 502" ("Bad_Gateway"); however, the errors are not captured by my catch-all "except Exception" clause -- ie: instead of writing 'error' in the appropriate row of the "output.csv", they get passed to the else clause and produce a short piece of html that starts: "Proxy error: 502 Read from server failed: Unknown error." Also, if I collect all the URLs which returned 502s and re-run the script, they all pass, which leads me to believe that this is a sporadic network path issue. Question: Can the script be made to recognize the the 502 errors, sleep a minute, and then retry the URL instead of moving on to the next URL in the list? The only alternative that I can think of is to apply re.search("Proxy error: 502") after "get_html_source" as a way to catch the bad calls. Then, if the RE matches, put the script to sleep for a minute and then retry 'sel.open(row[0]' on the URL which produced the 502. Any advice would be much appreciated. Thanks! #python 2.6 from selenium import selenium import unittest, time, re, csv, logging class Untitled(unittest.TestCase): def setUp(self): self.verificationErrors = [] self.selenium = selenium("localhost", 4444, "*firefox", "http://baseDomain.com") self.selenium.start() self.selenium.set_timeout("60000") def test_untitled(self): sel = self.selenium spamReader = csv.reader(open('ListOfSubDomains.csv', 'rb')) for row in spamReader: try: sel.open(row[0]) except Exception: ofile = open('output.csv', 'ab') ofile.write("error" + '\n') ofile.close() else: time.sleep(5) html = sel.get_html_source() ofile = open('output.csv', 'ab') ofile.write(html.encode('utf-8') + '\n') ofile.close() def tearDown(self): self.selenium.stop() self.assertEqual([], self.verificationErrors) if __name__ == "__main__": unittest.main()

    Read the article

  • ASP.NET MVC View Engine Resolution Sequence

    - by intangible02
    I created a simple ASP.NET MVC version 1.0 application. I have a ProductController which has one action Index. In the view, I created a corresponding Index.aspx under Product subfolder. Then I referenced the Spark dll and created Index.spark under the same Product view folder. The Application_Start looks like protected void Application_Start() { RegisterRoutes(RouteTable.Routes); ViewEngines.Engines.Clear(); ViewEngines.Engines.Add(new Spark.Web.Mvc.SparkViewFactory()); ViewEngines.Engines.Add(new WebFormViewEngine()); } My expectation is that since the Spark engine registers before default WebFormViewEngine, when browse the Index action in Product controller, the Spark engine should be used, and WebFormViewEngine should be used for all other urls. However, the test shows that the Index action for Product controller also uses the WebFormViewEngine. If I comment out the registration of WebFormViewEnginer (the last line in the code), I can see that the Index action is rendered by Spark engine and the rest urls generates an error (since the defualt engine is gone), it proves that all my Spark code is correct. Now my question is how the view engine is resolved? Why the registration sequence does not take effect?

    Read the article

  • CssClass and default images in ServerContol

    - by Jeff Dege
    I'm writing a ServerControl in ASP.NET 3.5, and I'm exposing CssClass, so the user can manipulate the visual appearance of the control. My problem is that I want to establish reasonable defaults, so that the user doesn't have to configure CSS unless he wants to change the defaults. My specific problem is that my control is emitting html divs, that need to display background images. I want the user to be able to specify a different image in CSS, but I want to display a default background image, and I can't make that work. The entire server control is emitted as a div, with a class name set to the value the user provided in CssClass. The div that needs the background image is enclosed within this outer div, with a class name of its own. I am currently setting the background image in CSS on the page that contains the control: <style type="text/css"> .cssClass .innerDiv { background-image: url("http://...."); } </style> With this the proper image is drawn. But if it's not there, no image is drawn. What I want is for the ServerControl to emit some CSS that will define these image urls, that would be over-ridden by any css that was added by the user, and for that default CSS to include URLs to images embedded in the ServerControl's assembly. And I'm not sure of how to do either. Nor, for that matter, am I sure this is the best approach. Any ideas?

    Read the article

  • url rewrite & redirect question

    - by Shawn
    Say currently I have url like : http://mydomain.com/showpost.php?p=123 Now I want to make it prettier : http://mydomain.com/123/post-title I'm using apache rewrite which grabs segment '123' and put the url back to http://mydomain.com/showpost.php?p=123 OK. Here is the problem. I want to redirect the original non-pretty urls which were indexed by Google to the pretty versions, I want this because I heard that Google may punish me if he sees multiple urls pointing to identical content. So I need to redirect /showpost.php?p=123 to /123/post-title This I have to do in my php code coz there's no way Apache to be able to figure out the 'post-title', but if I put the redirect code in php code, then it will be a infinite loop, such as : Request : /showpost.php?p=123 redirected to : /123/post-title rewritten to: /showpost.php?p=123 redirected again to : /123/post-title ... So on and so forth. Sorry I should Google the solution first but I really don't know how to describe my situation in English to make Google return reasonable results. Please help me. Thanks.

    Read the article

  • jackson failing to map empty array with No content to map to Object due to end of input

    - by ijabz
    I send a query to an api and map the json results to my classes using Jackson. When I get some results it works fine, but when there are no results it fails with java.io.EOFException: No content to map to Object due to end of input at org.codehaus.jackson.map.ObjectMapper._initForReading(ObjectMapper.java:2766) at org.codehaus.jackson.map.ObjectMapper._readMapAndClose(ObjectMapper.java:2709) at org.codehaus.jackson.map.ObjectMapper.readValue(ObjectMapper.java:1854) at com.jthink.discogs.query.DiscogsServerQuery.mapQuery(DiscogsServerQuery.java:382) at com.jthink.discogs.query.SearchQuery.mapQuery(SearchQuery.java:37)* But the thing is the api isn't returning nothing at all, so I dont see why it is failing. Here is the query: http://api.discogs.com/database/search?page=1&type=release&release_title=nude+and+rude+the+best+of+iggy+pop this is what I get back { "pagination": { "per_page": 50, "pages": 1, "page": 1, "urls": {}, "items": 0 }, "results": [] } and here is the top level object Im trying to map to public class Search { private Pagination pagination; private Result[] results; public Pagination getPagination() { return pagination; } public void setPagination(Pagination pagination) { this.pagination = pagination; } public Result[] getResults() { return results; } public void setResults(Result[] results) { this.results = results; } } Im guessing the problem is something to do with the results array being returned being blank, but cant see what Im doing wrong EDIT: The comment below was correct, although I usually receive { "pagination": { "per_page": 50, "pages": 1, "page": 1, "urls": {}, "items": 0 }, "results": [] } and in these cases there is no problem but sometimes I seem to just get an empty String. Now Im wondering if the problem is how I read from the inputstream if (responseCode == HttpURLConnection.HTTP_OK) InputStreamReader in= new InputStreamReader(uc.getInputStream()); BufferedReader br= new BufferedReader(in); while(br.ready()) { String next = br.readLine(); sb.append(next); } return sb.toString(); } although I dont read until I get the response code, is it possible that the first time I call br.ready() that I call it before it is ready, and therefore I don't read the input EDIT 2: Changing above code to simply String line; while ((line = br.readLine()) != null) { sb.append(line); } resolved the issue.

    Read the article

  • Editing a User's Likes on Facebook

    - by Ed Marty
    I've been looking at the Facebook API to find some way to edit a user's Likes (that is, add or remove items from https://graph.facebook.com/me/likes/). The API doesn't say anything about it specifically, but does say this: You can publish to the Facebook graph by issuing HTTP POST requests to the appropriate connection URLs above. Where above, one of the connection URLs is the aforementioned https://graph.facebook.com/me/likes link. However, there's no documentation for the PROFILE_ID/likes post, and whenever I try to post it returns the error "invalid post_id". I assume this is because to like something, you post a request to POST_ID/likes. It's a bit inconsistent. What I'm trying to do is get the user's profile to add a Page to their likes (by posting using the page's id as an "id" parameter in the post body). However, it seems like there's just no way to edit user's likes. At the end of the day, I just want to allow a user to click a button in my application (mobile device application, not a web app) and have them add our Facebook page into their list of pages, and I've found no way of doing that short of presenting our page to them and making them click on the "Like" button manually. Many other things are supported without showing the Facebook website, like posting to their wall or making albums, but I can't find anything to do this. Any ideas?

    Read the article

  • ASP.NET MVC on GoDaddy Not Working (Not Primary Domain Deployment)

    - by JPrescottSanders
    I am trying to get ASP.NET MVC working on GoDaddy and I'm not having much luck. I have read the post on SO that covers the subject, but I must have a slightly different configuration or must be missing somehting along the way because the main MVC page comes up, but all links seem to fail and no amount of tweaking the URLs seems to get it to work. A little back ground. I have a single hosting plan with many domains pointed to sub folders of the main domain. Basic ASP.NET web forms pages work just fine, but of course I wanted to try and host a sample MVC site in one of these non-primary domains. You can go to the URL here. As you can see this first page comes up, but if you click on Home or About it doesn't work. Clicking on Home creates this link "http://www.jprescottsanders.com/jps/" and clicking on about creates this link "http://www.jprescottsanders.com/jps/Home/About". As you can see JPS sneaks in there, this of course is the sub folder that i place my web app files in. I would like to know if this is a MVC related issue or a GoDaddy issue. I suspect that MVC may want to sit in the root directory of the site, and when it puts the "jps" into the URLs it breaks the routing mechanisms (but this is conjecture). I know Dan said this was possible so I'm hoping he sees this and helps me get to the bottom of this deployment strategy for MVC.

    Read the article

  • Help converting PHP eregi to preg_match

    - by Jason
    Hi all, I am wondering if someone could please help me convert a piece of PHP code that is now deprecated. Here is the single line I am trying to convert: if(eregi(trim ($request_url_handler[$x]),$this->sys_request_url) && $this->id_found == 0){ It is part of a function that return the configuration settings for a website. Below is the whole function. // GET CORRECT CONFIG FROM DATABASE function get_config($db) { global $tbl_prefix; $db->query("SELECT cid,urls FROM ".$tbl_prefix."sys_config ORDER BY cid"); while($db->next_record()){ $request_url_handler = explode("\n",$db->f("urls")); if(empty($request_url_handler[0])) { $request_url_handler[0] = "@"; $this->id_found = 2; } for($x=0; $x<count($request_url_handler); $x++) { if(empty($request_url_handler[$x])) { $request_url_handler[$x] = "@"; } if(eregi(trim($request_url_handler[$x]),$this->sys_request_url) && $this->id_found == 0) { $this->set_config($db,$db->f("cid")); $this->id_found = 1; } } if($this->id_found == 1) { return($this->sys_config_vars); } } $this->set_config($db,""); return($this->sys_config_vars); } Any help would be great ly appreciated. I only found the the eregi function was deprecated since I updated XAMPP to 1.7.3.

    Read the article

  • How can I do such a typical unittest?

    - by Malcom.Z
    This is a simple structure in my project: MyAPP--- note--- __init__.py views.py urls.py test.py models.py auth-- ... template--- auth--- login.html register.html note--- noteshow.html media--- css--- ... js--- ... settings.py urls.py __init__.py manage.py I want to make a unittest which can test the noteshow page working propeyly or not. The code: from django.test import TestCase class Note(TestCase): def test_noteshow(self): response = self.client.get('/note/') self.assertEqual(response.status_code, 200) self.assertTemplateUsed(response, '/note/noteshow.html') The problem is that my project include an auth mod, it will force the unlogin user redirecting into the login.html page when they visit the noteshow.html. So, when I run my unittest, in the bash it raise an failure that the response.status_code is always 302 instead of 200. All right though through this result I can check the auth mod is running well, it is not like what I want it to be. OK, the question is that how can I make another unittest to check my noteshow.template is used or not? Thanks for all. django version: 1.1.1 python version: 2.6.4 Use Eclipse for MAC OS

    Read the article

  • Nginx rewrite for link shortener and Wordpress

    - by detusueno
    I'm a complete newbie to Nginx, so much so that I followed a online guide to do most of my server setup. I'm trying to learn but I'm still a ways away from understanding it all. So what I'm trying to create is a link shortener that redirects (example.com/x) to (example.com/short.php?id=x). Keep in mind that I'm also running a Wordpress blog on the same domain and plan on using the redirects/shortening for external links. The guide has so far had me add the following rewrites to enable Wordpress pretty URLs: # WordPress pretty URLs: (as per dominiek.com) if (-f $request_filename) { break; } if (-d $request_filename) { break; } rewrite ^(.+)$ /index.php?q=$1 last; # Enable nice permalinks for WordPress: (as per Yawn.it) error_page 404 = //index.php?q=$uri; And if it matters any, it was saved at (/usr/local/nginx/conf/wordpress_params.regular). Additionally, my Wordpress link structure adds "news" to all internal links (example.com/news/post-blah, example.com/news/category, ect.). What's the best way to tackle this setup?

    Read the article

  • Using Android AsyncTask to download html file

    - by Lukas Tomsu
    i just started with android and i'm working on a simple app that should download contents of a html file. I'm using AsyncTask as suggested, but i'm encountering one problem. In the following code (i followed a tutorial code), i get tv cannot be resolved for the onPostExecute method. How to access the downloaded file? Thank You: public class FlashResults extends Activity { @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); TextView tv = new TextView(this); setContentView(tv); readWebpage(tv); } protected class DownloadPage extends AsyncTask<String, Void, String> { protected String doInBackground(String... urls) { String responseStr = null; try { for (String url : urls) { DefaultHttpClient httpClient = new DefaultHttpClient(); HttpGet get = new HttpGet(url); HttpResponse httpResponse = httpClient.execute(get); HttpEntity httpEntity = httpResponse.getEntity(); responseStr = EntityUtils.toString(httpEntity); } } catch (UnsupportedEncodingException e) { } catch (ClientProtocolException e) { } catch (IOException e) { } return responseStr; } protected void onPostExecute(String result) { tv.setText(result); } } public void readWebpage(View v) { DownloadPage task = new DownloadPage(); task.execute(new String[] { "http://seznam.cz" }); } }

    Read the article

  • Will rel=canonical break site: queries ?

    - by Justin Grant
    Our company publishes our software product's documentation using a custom-built content management system using a dynamic URL namespace like this: http://ourproduct.com/documentation/version/pageid Where "version" is the version number to which the documentation applies, and "pageid" is a unique string which identifies that page in our back-end content management system. For example, if content (e.g. a page about configuration best practices) is unchanged from version 3.0 and 4.0 of our product, it'd be reachable by two different URLs: http://ourproduct.com/documentation/3.0/configuration-best-practices http://ourproduct.com/documentation/4.0/configuration-best-practices This URL scheme allows us to scope Google search results to see only documentaiton for a particular product version, like this: configuration site:ourproduct.com/documentation/4.0 But when the user is searching across all versions, we don't want Google to arbitrarily choose one of the URLs to show in results. Instead, we always want the latest version to show up. Hence our planned use of rel=canonical so we can proscriptively tell Google which URL we want to show up if multiple versions are being searched. (Users who do oddball things like searching 2 versions but not all of them are a corner case, so we don't care which version(s) show up in that case-- the primary use-cases we care about is searching one version or searching all versions) But what will happen to scoped searches if we do this? If my rel=canonical URL points to version 4.0, but my search is scoped to 3.0, will Google return a result? Even if you don't know the answer offhand, do you know a site which uses rel=canonical to redirect across folders in a URL namespace. If so, I could run a few Google searches and figure out the answer.

    Read the article

  • django powering multiple shops from one code base on a single domain

    - by imanc
    Hey, I am new to django and python and am trying to figure out how to modify an existing app to run multiple shops through a single domain. Django's sites middleware seems inappropriate in this particular case because it manages different domains, not sites run through the same domain, e.g. : domain.com/uk domain.com/us domain.com/es etc. Each site will need translated content - and minor template changes. The solution needs to be flexible enough to allow for easy modification of templates. The forms will also need to vary a bit, e.g minor variances in fields and validation for each country specific shop. I am thinking along the lines of the following as a solution and would love some feedback from experienced django-ers: In short: same codebase, but separate country specific urls files, separate templates and separate database Create a middleware class that does IP localisation, determines the country based on the URL and creates a database connection, e.g. /au/ will point to the au specific database and so on. in root urls.py have routes that point to a separate country specific routing file, e..g (r'^au/',include('urls_au')), (r'^es/',include('urls_es')), use a single template directory but in that directory have a localised directory structure, e.g. /base.html and /uk/base.html and write a custom template loader that looks for local templates first. (or have a separate directory for each shop and set the template directory path in middleware) use the django internationalisation to manage translation strings throughout slight variances in forms and models (e.g. ZA has an ID field, France has 'door code' and 'floor' etc.) I am unsure how to handle these variations but I suspect the tables will contain all fields but allowing nulls and the model will have all fields but allowing nulls. The forms will to be modified slightly for each shop. Anyway, I am keen to get feedback on the best way to go about achieving this multi site solution. It seems like it would work, but feels a bit "hackish" and I wonder if there's a more elegant way of getting this solution to work. Thanks, imanc

    Read the article

  • multithreading issue

    - by vbNewbie
    I have written a multithreaded crawler and the process is simply creating threads and having them access a list of urls to crawl. They then access the urls and parse the html content. All this seems to work fine. Now when I need to write to tables in a database is when I experience issues. I have 2 declared arraylists that will contain the content each thread parse. The first arraylist is simply the rss feed links and the other arraylist contains the different posts. I then use a for each loop to iterate one while sequentially incrementing the other and writing to the database. My problem is that each time a new thread accesses one of the lists the content is changed and this affects the iteration. I tried using nested loops but it did not work before and this works fine using a single thread.I hope this makes sense. Here is my code: SyncLock dlock For Each l As String In links finallinks.Add(l) Next End SyncLock SyncLock dlock For Each p As String In posts finalposts.Add(p) Next End SyncLock ... Dim i As Integer = 0 SyncLock dlock For Each rsslink As String In finallinks postlink = finalposts.Item(i) i = i + 1 finallinks and finalposts are the two arraylists. I did not include the rest of the code which shows the threads working but this is the essential part where my error occurs which is basically here postlink = finalposts.Item(i) i = i + 1 ERROR: index was out of range. Must be non-negative and less than the size of the collection Is there an alternative?

    Read the article

  • Retrieve a list of the most popular GET param variations for a given URL?

    - by jamtoday
    I'm working on building intelligence around link propagation, and because I need to deal with many short URL services where a reverse-lookup from an exact URL address is required, I need to be able to resolve multiple approximate versions of the same URL. An example would be a URL like http://www.example.com?ref=affil&hl=en&ct=0 Of course, changing GET params in certain circumstances can refer to a completely different page, especially if the GET params in question refer to a profile or content ID. But a quick parse of the page would quickly determine how similar the pages were to each other. Using a bit of machine learning, it could quickly become clear which GET params don't effect the content of the pages returned for a given site. I'm assuming a service to send a URL and get a list of very similar URLs could only be offered by the likes of Google or Yahoo (or Twitter), but they don't seem to offer this feature, and I haven't found any other services that do. If you know of any services that do cluster together groups of almost identical URLs in the aforementioned way, please let me know. My bounty is a hug.

    Read the article

  • svnserve not strictly required?

    - by Kev
    I was reading the Red Bean book and noticed this paragraph: Do not be seduced by the simple idea of having all of your users access a repository directly via file:// URLs. Even if the repository is readily available to everyone via a network share, this is a bad idea. It removes any layers of protection between the users and the repository: users can accidentally (or intentionally) corrupt the repository database, it becomes hard to take the repository offline for inspection or upgrade, and it can lead to a mess of file permission problems (see the section called “Supporting Multiple Repository Access Methods”). Note that this is also one of the reasons we warn against accessing repositories via svn+ssh:// URLs—from a security standpoint, it's effectively the same as local users accessing via file://, and it can entail all the same problems if the administrator isn't careful. I realized that, since I'm the only one accessing the repository, ever, none of these caveats seem to apply. Can I safely down svnserve then and only ever have to worry about upgrading my TortoiseSVN client, not both the client and the server whenever there's a new version out? (I've tried it already--just needed to use the Relocate feature to switch from svn:// to file://--but I wanted to make sure something wouldn't be sneaking up on me if I left it this way.)

    Read the article

  • Embedded Jetty resourceBase classpath URL

    - by drewzilla
    I'm embedding Jetty in a Spring based application. I configure my Jetty server in a Spring context file. The specific part of the configuration I'm having trouble with is this: <bean class="org.eclipse.jetty.webapp.WebAppContext"> <property name="contextPath" value="/" /> <property name="resourceBase" value="????????" /> <property name="parentLoaderPriority" value="true" /> </bean> If you see above, where I've put the ????????, I ideally want the resourceBase to reference a folder on my classpath. I'm deploying my application in a single executable JAR file and have a folder config/web/WEB-INF on my classpath. Jetty seems to be able to handle URLs defined in the resourceBase (e.g. jar:file:/myapp.jar!/config/web) but it doesn't seem to support classpath URLs. I get an IllegalArgumentException if I define something like classpath:config/web. This is a real pain for me. Does anyone know of anyway to achieve this functionality? Thanks, Andrew

    Read the article

  • Is it legal to have different SOAP namespaces/versions between the request and response?

    - by Lord Torgamus
    THIRD EDIT: I now believe that this problem is due to a SOAP version mismatch (1.1 request, 1.2 response) masquerading as a namespace problem. Is it illegal to mix versions, or just bad style? Am I completely out of luck if I can't change my SOAP version or the service's? SECOND EDIT: Clarified error message, and tried to reduce "tl;dr"-ness. EDIT: [Link deleted, not related] Using soapUI, I'm sending a request that starts with: <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" ... and getting a response that starts with: <soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" ... I know the service is getting the info, because processes down the line are working. However, my soapUI teststep fails. It has two active assertions: "SOAP Response" and "Not SOAP Fault." The failure marker is next to "SOAP Response," with the following message: line -1: Element Envelope@http://www.w3.org/2003/05/soap-envelope is not a valid Envelope@http://schemas.xmlsoap.org/soap/envelope/ document or a valid substitution. I have tried mixing and matching the namespace prefixes and schema URLs. Changing prefixes seems to have no effect; changing URLs causes a VersionMismatch error. I have also tried to use a substitution group, but that doesn't seem to be legal.

    Read the article

  • Configuring mod_rewrite and mod_jk for Apache 2.2 and JBoss 4.2.3

    - by The Pretender
    Hello! My problem is as follows: I have JBoss 4.2.3 application server with AJP 1.3 connector running on one host under Windows (192.168.1.2 for my test environment) and Apache 2.2.14 running on another FreeBSD box (192.168.1.10). Apache acts as a "front gate" for all requests and sends them to JBoss via mod_jk. Everything was working fine until I had to do some SEO optimizations. These optimizations include SEF urls, so i decided to use mod_rewrite for Apache to alter requests before they are sent to JBoss. Basically, I nedd to implement 2 rules: Redirect old rules like "http://hostname/directory/" to "http://hostname/" with permanent redirect Forward urls like "http://hostname/wtf/123/" to "http://hostname/wtf/view.htm?id=123" so that end user doesn't see the "ugly" URL (the actual rewrite). Here is my Apache config for test virtual host: <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/usr/local/www/dummy" ServerName 192.168.1.10 <IfModule mod_rewrite.c> RewriteEngine On RewriteRule /directory/(.*) /$1 [R=permanent,L] RewriteRule ^/([^/]+)/([0-9]+)/?$ /$1/view.htm?id=$2 </IfModule> JkMount /* jsp-hostname ErrorLog "/var/log/dummy-host.example.com-error_log" CustomLog "/var/log/dummy-host.example.com-access_log" common </VirtualHost> The problem is that second rewrite rule doesn't work. Requests slip through to JBoss unchanged, so I get Tomcat 404 error. But if I add redirect flag to the second rule like RewriteRule ^/([^/]+)/([0-9]+)/?$ /$1/view.htm?id=$2 [R,L] it works like a charm. But redirect is not what I need here :) . I suspect that the problem is that requests are forwarded to the another host (192.168.1.2), but I really don't have any idea on how to make it work. Any help would be appreciated :)

    Read the article

  • C++ Returning Multiple Items

    - by Travis Parks
    I am designing a class in C++ that extracts URLs from an HTML page. I am using Boost's Regex library to do the heavy lifting for me. I started designing a class and realized that I didn't want to tie down how the URLs are stored. One option would be to accept a std::vector<Url> by reference and just call push_back on it. I'd like to avoid forcing consumers of my class to use std::vector. So, I created a member template that took a destination iterator. It looks like this: template <typename TForwardIterator, typename TOutputIterator> TOutputIterator UrlExtractor::get_urls( TForwardIterator begin, TForwardIterator end, TOutputIterator dest); I feel like I am overcomplicating things. I like to write fairly generic code in C++, and I struggle to lock down my interfaces. But then I get into these predicaments where I am trying to templatize everything. At this point, someone reading the code doesn't realize that TForwardIterator is iterating over a std::string. In my particular situation, I am wondering if being this generic is a good thing. At what point do you start making code more explicit? Is there a standard approach to getting values out of a function generically?

    Read the article

  • Testing Async downloads with ASIHTTPRequest

    - by Baishampayan Ghose
    I am writing a simple library using ASIHTTPRequest where I am fetching URLs in an async manner. My problem is that the main function that I have written to test my lib exits before the async calls are finished. I am very new to Obj C and iPhone development, can anyone suggest a good way to wait before all the requests are finished in the main function? Currently, my main function looks like this - int main(int argc, char *argv[]) { NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; IBGApp *ibgapp = [[IBGApp alloc] init]; IBGLib *ibgl = [[IBGLib alloc] initWithUsername:@"joe" andPassword:@"xxx"]; // The two method calls below download URLs async. [ibgl downloadURL:@"http://yahoo.com/" withRequestDelegate:ibgapp andRequestSelector:@selector(logData:)]; [ibgl downloadURL:@"http://google.com/" withRequestDelegate:ibgapp andRequestSelector:@selector(logData:)]; [pool release]; return 0; // I reach here before the async calls are done. } So what is the best way to wait till the async calls are done? I tried putting sleep, but obviously doesn't work.

    Read the article

  • What techniques can be used to detect so called "black holes" (a spider trap) when creating a web crawler?

    - by Tom
    When creating a web crawler, you have to design somekind of system that gathers links and add them to a queue. Some, if not most, of these links will be dynamic, which appear to be different, but do not add any value as they are specifically created to fool crawlers. An example: We tell our crawler to crawl the domain evil.com by entering an initial lookup URL. Lets assume we let it crawl the front page initially, evil.com/index The returned HTML will contain several "unique" links: evil.com/somePageOne evil.com/somePageTwo evil.com/somePageThree The crawler will add these to the buffer of uncrawled URLs. When somePageOne is being crawled, the crawler receives more URLs: evil.com/someSubPageOne evil.com/someSubPageTwo These appear to be unique, and so they are. They are unique in the sense that the returned content is different from previous pages and that the URL is new to the crawler, however it appears that this is only because the developer has made a "loop trap" or "black hole". The crawler will add this new sub page, and the sub page will have another sub page, which will also be added. This process can go on infinitely. The content of each page is unique, but totally useless (it is randomly generated text, or text pulled from a random source). Our crawler will keep finding new pages, which we actually are not interested in. These loop traps are very difficult to find, and if your crawler does not have anything to prevent them in place, it will get stuck on a certain domain for infinity. My question is, what techniques can be used to detect so called black holes? One of the most common answers I have heard is the introduction of a limit on the amount of pages to be crawled. However, I cannot see how this can be a reliable technique when you do not know what kind of site is to be crawled. A legit site, like Wikipedia, can have hundreds of thousands of pages. Such limit could return a false positive for these kind of sites. Any feedback is appreciated. Thanks.

    Read the article

  • Django sitemap intermittent www

    - by Jen Z
    The automatic sitemap for my Django site fluctuates between including the www on urls and leaving it out (I'm aiming to have it in all the time). This has ramifications in google not indexing my pages properly so I'm trying to narrow down what would be causing this issue. I have set PREPEND_WWW = True and my site record in the sites framework is set to include the www e.g. it's set to www.example.com as opposed to example.com. I'm using memcached but pages should expire from the cache after 48 hours so I wouldn't have thought that would be causing the issue? You can see the problem in effect at http://www.livingspaceltd.co.uk/sitemap.xml (refresh the page a few times). My sitemaps setup is fairly prosaic so I'm doubtful that that is the issue, but in case it's something obvious I'm missing here's the code: ***urls.py*** sitemaps = { 'subpages': Subpages_Sitemap, 'standalone_pages': Standalone_Sitemap, 'categories': Categories_Sitemap, } urlpatterns = patterns('', (r'^sitemap\.xml$', 'django.contrib.sitemaps.views.sitemap', {'sitemaps': sitemaps}), ... ***sitemaps.py*** # -*- coding: utf-8 -*- from django_ls.livingspace.models import Page, Category, Standalone_Page, Subpage from django.contrib.sitemaps import Sitemap class Subpages_Sitemap(Sitemap): changefreq = "monthly" priority = 0.4 def items(self): return Subpage.objects.filter(restricted_to__isnull=True) class Standalone_Sitemap(Sitemap): changefreq = "weekly" priority = 1 def items(self): return Standalone_Page.objects.all() class Categories_Sitemap(Sitemap): changefreq = "weekly" priority = 0.7 def items(self): return Category.objects.all()

    Read the article

  • substitution cypher with different alphabet length

    - by seanizer
    I would like to implement a simple substitution cypher to mask private ids in URLs I know how my IDs will look like (combination of upperchase ascii, digits and underscore), and they will be rather long, as they are composed keys. I would like to use a longer alphabet to shorten the resulting codes (I'd like to use upper and lower case ascii letters, digits and nothing else). So my incoming alphabet would be [A-Z0-9_] (37 chars) and my outgoing alphabet would be [A-Za-z0-9] (62 chars) so a compression of almost 50% would be available. let's say my URLs look like this: /my/page/GFZHFFFZFZTFZTF_24_F34 and I want them to look like this instead: /my/page/Ft32zfegZFV5 Obviously both arrays would be shuffled to bring some random order in. This does not have to be secure. if someone figures it out: fine, but I don't want the scheme to be obvious. My desired solution would be to convert the string to an integer representation of radix 37, convert the radix to 62 and use the second alphabet to write out that number. is there any sample code available that does something similar? Integer.parseInt ( http://java.sun.com/javase/6/docs/api/java/lang/Integer.html#parseInt%28java.lang.String,%20int%29 ) has some similar logic, but it is hard-coded to use standard digit behavior Any hints? I am using java to implement this but code or pseudo-code in any other language is of course also helpful

    Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >