Search Results

Search found 12899 results on 516 pages for 'usb boot'.

Page 47/516 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• G5 quad core will not boot from Ubuntu CD

  - by Steve Howard

  I have a PPC G5 Quad Core with Leopard on one hard drive and I want to install Ubuntu on a second hard drive. The second drive is installed and formatted as a Mac OS Extended (Journaled) drive. I have had no success booting from a CD or DVD with various PPC versions of Ubuntu using any of the suggested keys such as "C, Option, or anything else. Booting into open firmware doesn't work as the system can't find the \install\yaboot file. I am using various CD's burned as iso disk images, but none will boot. I have reset the PRAM, etc, to no avail. Beginning to get very frustrated. Can someone shed some light and provide me with a command line in open firmware that will work, or else direct me to a confirmed PPC bootable version of Ubuntu please? I'd appreciate any help you can provide....

  Read the article

• Backtrack 5 R2 Dual-Boot w/Windows 7 No Longer Loads

  - by dstars5

  A while back, I installed Backtrack 5 R2 to Dual Boot on a Windows 7 PC. It worked fine for a while, but now when I try to load it, the screen gets all messed up (tried to get a picture with my phone, but it wasn't working too well). The last line before it freezes says: fb: conflicting fb hw usage: nouveaufb vs VESA VGA - removing generic driver Since it last worked, the only changes I can think of are that the computer is now connected via ethernet cable to the router, and I upgraded the graphics card (to nvidia). Because of the last line, I personally would put my money on the latter, but I still have no clue how to fix this. Can someone help me? Thanks!

  Read the article

• Upgrading a dual-boot system HDD

  - by Jason

  I dual-boot my laptop due to lousy VM performance, and have a new 500GB/7200rpm drive coming in to replace the stock 320GB/5400rpm drive. I have the drive set up in three partitions: one for the Win7 system files, one for storage, and the third as the ext4 Linux file system. The system file and storage partitions are both NTFS. What I'm planning to do is use the system image creator built in Win7, then move that over to the new drive. However, how can I migrate the Ubuntu partition, and how do I make sure that the Grub bootloader isn't overwritten by the Windows loader?

  Read the article

• Problem with Ubuntu 12.04 boot

  - by Etienne

  I'm having a problem as stated in the title regarding bootup. What happens basically is that after grub is loaded the system doesn't boot. I get a black screen with cursor blinking then the screen darkens ( switches off ) and keyboard is unresponsive. Today I have re-installed everything on a new hard drive and it happened again. This has been observed when running kernel 3.5.0-30 and 3.5.0-28. System is an HP6550b. Can someone help me on this please ? Many Thanks!

  Read the article

• Dual boot windows 8.1 acer V3-571G with Ubuntu 13.10

  - by tara512

  I am trying to dual boot my acer which came with windows 8 pre-installed. I tried using the tutorial here doing it the simple way but when I load Ubuntu from my transcended flash drive it says that there is no other operating system installed. I tried partitioning my hard drive but I seem to have 3 recovery partitions and even though I have 485GB free I can only allocate 100GB to the new partition. I would like to have most of my hard drive allocated to Ubuntu and just use the windows for programs like microsoft office.

  Read the article

• Broken Splash boot screen with significant performance and freezing issues

  - by Ghost_ITMachine

  okay heres the story and yes this is important becauses its what was the last thing i did before this madness watched a youtube video which ive now flagged and reported but he basically instructed us to su virtualbox into the system i dont know what i did all i did was follow directions now im plagued with no ubuntu purple boot screen it goes straight to a black screen filled with letters and im experiencing more lag and freezing than i ever have before this is not from an upgrade ive had 14.04 for about a month before this happened im at a loss for what my routes are it was all i could do to remove the superblocks just to get back into my desktop please help

  Read the article

• Upgrade from 12.04 to 13.10: Computer won't boot

  - by Christian

  I upgraded from 12.04 to 13.10 and my computer boots to a black screen. I hear the drumroll, but there is no functionality after that. I've downloaded a livecd of 12.04 on my other computer, and I changed the BiOS settings to boot from CD/DVD first, but it still does the same thing. I booted advanced options, edited [ro quick splash] to [ro nomodeset] and it started normally. I rebooted the system and it was back to the same junk. What do I need to do while it is operating to make it reliable with every restart? This seems to be a systemic issues with NUMEROUS Ubuntu upgrades, but I haven't read a solution yet. I need some help, please! Thanks.

  Read the article

• cryptsetup partitions not detected at boot

  - by Luis

  I installed a fresh 12.04 and tried to mimic what I had for 10.04. swap should be encrypted with a urandom key and there's another partition that will contain home and other directories. # cat /etc/crypttab | grep -v '^#' | grep -v '^$' cryptswap /dev/sda5 /dev/urandom swap encriptado /dev/sda6 # grep -e 'cryptswap' -e 'encriptado' /etc/fstab /dev/mapper/cryptswap swap swap defaults 0 0 /dev/mapper/encriptado /encriptado ext4 defaults 0 0 I also apt-get install cryptsetup When I boot, the system says (try to translate) that either the partition is not found or is not ready. I should wait, press M for manual or S to jump over. What am I missing here?

  Read the article

• Ubuntu 12.10 dual boot windows 7 not working

  - by Joseph

  When i install ubuntu, and the computer restarts it doesn't show the boot managaer so it always boots in windows 7. I tried to change the default os, and ubuntu wasn't even listed in it. Then I read a how to on it, it showed how to size the partions and make them correctly, but it still didn't work. I tried easyBCD and still no success. I've tried installing it about 4-5 times and i still can't get it. What can i do to fix it?

  Read the article

• Can't boot - "Waiting for Network Configuration"

  - by user213017

  After an update on 13.10, my PC won't boot Ubuntu any longer. It displays the infamous "Waiting for Network Configuration" message and then hangs. I can go into recovery mode, and choose "Start networking" and then go to a root prompt, and that works fine. Ping works. /etc/network/interfaces contains just the two lines "auto lo" and "iface lo inet loopback". I've double-checked that my network is working, the cable is working (it works on another PC) and the network card seems to indicate a connection. Any suggestions on how to get my PC booted again? Right now I'm limited to a root shell prompt.

  Read the article

• Ubuntu 12.04 x64 doesn't boot anymore after a power failure

  - by Felix

  I'm a Windows user and I have no experience with Linux and Ubuntu. I installed Ubuntu 12.04 on my netbook (Asus 1215B) and everything works fine. Yesterday I ran the "update application" and updated over 120 "things" (I have no idea what exactly). After that I was asked to reboot, and I did. Ubuntu starts again and at the load screen with these 5 dots that normally begin to change color, it freezes. After 20 minutes I took out the battery to try another reboot (yes, not the the best idea), and now nothing happens. I boot from the HDD and I get an Error BOOTMGR is missing. I have important data on the hard drive. Is there an option to get this fixed? Or if not, to at least get the data from the hard drive?

  Read the article

• Ubuntu doesn't boot after upgrade

  - by Hugtrw

  I updated to 12.10 and the OS will not load. I used the boot repair cd, and the only thing that works is the monodeset option in the kernel and the graphics are terrible, mouse disappears and unity will not load. Ubuntu 12.04 ran great. On a clean install of 12.10 Ubuntu wont even load to install unless under using monodeset. I get left a terminal like screen with just a blinking bar. I'm using a HP Compaq NC6400 Laptop, Ubuntu 32-bit, 2gb ram.

  Read the article

• Dual boot w/ windows 7

  - by Aduff

  So my PC had windows XP and Win 7 on it and I went into the XP partition and installed Ubuntu 12.10 over it being sure to use 90% of the XP partition for the / mount and 10% for the swap. It installed but when I boot the computer it doesn't give me the option of choosing between 7 or Ubuntu, just booting right to the Linux distro. Should I have installed it in 7 over the XP partition? I can see the drive in Ubuntu that contains all the 7 files. How can I recover my 7 access?

  Read the article

• Dual boot (Win 7 & Ubuntu 13.10 clock problem

  - by peter

  I'm a "newbie" to Ubuntu, but I've been wrestling with this problem for several hours and don't seem to be able to solve it: When I set the time in Windows (Indianapolis, Eastern U.S. time zone) and then re-boot to Ubuntu, the computer time goes to Hawaiian time. When the time is set in Ubuntu, and the computer is rebooted to Windows the time is advanced by 5 hours. I've set the time in the BIOS, and it seems to make no difference. I've tried setting the time from "automatic" to "manual", all with the same result. Not a big problem, but it shows some underlying glitch. Could anyone explain?

  Read the article

• I have installed Ubuntu 12.04, now my Windows Vista doesn't boot

  - by andraz

  I have a Windows Vista computer. And I've installed Ubuntu 12.04 on it. But now, when I boot my device it doesn't ask me which OS I want to choose, instead it just boots in Ubuntu. Please help me! I don't know what to do... :/ P.S.: I've created a partition with the Ubuntu installer. My hard disk drive is 250 gb (there around) and the partition is 30gb big... P.S.S.: It's very important because is my mom's computer and there are some very important files on it... :(

  Read the article

• Clean install of 12.04 won't boot from HDD

  - by MarchingKazoo

  Downloaded 12.04.2. Made CD. Machine boots from CD as expected. Installed onto HD. Upon reboot, "Read error" message appears. Upon booting from CD, the HD appears as expected: One partition for Ubuntu, taking up about 12 gig, the rest empty. Lather, rinse, repeat five times. Results of "sudo fdisk -l": Disk /dev/sda: 200.0 GB, 200049647616 bytes 255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000dfa3e Device Boot Start End Blocks Id System /dev/sda1 * 2048 386596863 193297408 83 Linux /dev/sda2 386598910 390721535 2061313 5 Extended /dev/sda5 386598912 390721535 2061312 82 Linux swap / Solaris Should this be complicate? Seems no.

  Read the article

• boot problem with ubuntu and windows 8

  - by hunch

  i have a hp dv6 system. on which i was having the windows 8 installed. as i was interested in downloading the ubuntu 12.10 along with windows 8(not inside) .i have made separate partition in ubuntu 12.10 but some how it backfires and now i am not able to boot windows 8 and ubuntu. with windows 8 there is no drive to access the drive partition that has OS. with ubuntu i am getting blank screen. i am thinking that i have problem in system partition but i am not able to solve it. Plz help me. i am in a venerable condition... i have tried booting the window with the help of installation cd but iam not succesful in any of the method - 1-reset PC 2-RECOVERY 3- from command prompt i tried to check disks but it is not showing anything

  Read the article

• How can I remove all drivers and other files related to a USB Mass Storage device?

  - by Bob

  I have a flash drive here that does not work on one OS on computer - let's call it the desktop Windows 7. It works fine on another computer - laptop Windows 7. It also works fine on Windows 8 on the same desktop computer. Other flash drives work fine under desktop Windows 7. So not a hardware issue, not a generic USB Mass Storage driver issue. It's something specific to this drive. On desktop Windows 7, I can connect the drive but no volume comes up under Windows Explorer. Ditto for Disk Management. With diskpart, loading hangs until I unplug the drive, if I replug it and try list disk it hangs again. If I unplug the drive at this point, list disk prints out all attached drives - including the just removed flash drive. The drive consistently appears under Device Manager, but uninstalling the drivers, restarting and reinstalling the drivers (by inserting the drive) only works for the first insertion. After that it fails again. I get the feeling that the driver files are not actually removed, and are corrupted, meaning every reinstall it's the same corrupted drivers being installed. Is there any way to remove these drivers completely? Or perhaps some other setting Windows 7 retains? Formatting the drive through another computer/OS does not help. I've also tried a complete wipe and rebuild of the MBR and single partition. The allocation unit size makes no difference; neither does a NTFS format. This is a relatively small matter, and I would not like to reinstall the entire OS!

  Read the article

• ecryptfs - decrypt and mount at boot with USB key

  - by Josh McGee

  I have a system running Ubuntu Server as a testbed for some services that I want to get familiar with. I decided to let the installation procedure set up encryption. I knew all along that I would have to decrypt it with the passphrase in order to get the system booted, but I assumed it wouldn't matter since it will only boot once or twice a month. However, my brother has informed me that he is a victim of power outages at the residence where this server is located. This means we have to explain to his girlfriend how to turn on the computer, attach a keyboard, connect a monitor (she just can't understand that she can type to the computer without a display, so whatever) and input the passphrase for us, while we are at work. I have arrived at the conclusion that I should just put together a USB key that can be plugged in before powering on the computer, to avoid all the trouble. Is this possible with ecryptfs? Is there a tutorial or simple list of instructions available so that I can knock this out and focus back on the stuff I care about? EDIT: I am aware that this is possible with LUKS and dm-crypt, but unfortunately the magical encryption that Ubuntu hands you during the installation is only ecryptfs so my question is specific to that.

  Read the article

• Cannot mount USB drive -- FSTAB error

  - by user107646

  Recently, one of my desktops seems to have developed a problem with the fstab and mounting USB drives. The specific error I receive is... Unable to mount TRAVELDRIVE Error mounting: mount exited with exit code 1: helper failed with: Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at http://tuxera.com/community/ntfs-3g-faq/#unprivileged The contents of my fstab are... /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 #Entry for /dev/sdc1 : UUID=7e3431cd-522f-4e35-b286-4300fa702d4a / ext4 errors=remount-ro 0 1 #Entry for /dev/sda1 : UUID=60684D08684CDE82 /media/Archive ntfs-3g defaults,locale=en_US.UTF-8 0 0 #Entry for /dev/sdc5 : UUID=cd166221-4b1d-40f7-b9de-785208990587 none swap sw 0 0 /dev/sdd1 /media/sdd1 ntfs nls=iso8859-1,ro,users,umask=000,user 0 0 /dev/sdd5 /media/PS3 (fat32) vfat users,user 0 0 /dev/sdd5 /media/sdd5 vfat uid=m3talhead,users,user 0 0 I'm guessing its a problem with the duplicate /dev/sdd5 entries (?), but being the *nix noob I am, I'm not certain. What am I missing? Any assist is greatly appreciated!

  Read the article

• 1.5 TB USB Drive failed to mount

  - by user89348

  Seagate 1.5Tb FreeAgent USB Hard Drive. Formatted FAT32. I figure it is 75% full. Used to work fine in XUBUNTU it shows up in Cairo Dock but when I click on it I get "failed to mount drive'. Nautilus does not display the icon nor does Thunar. Windows Vista will no longer recognise drive either. Back Track 5R3 also no longer fails to mount it. BUT and here is the BIG BUT my Pioneer DV-410 reads the files and plays the everything just fine. I believe this all happened after an unclean shutdown / XUbuntu 12.10 system freeze. Why can't XUBUNTU mount this drive when a crappy 13 year old DVD player can mount it. I am desperate to back up the data before just in case the drive becomes completely unreadable. Using XUBUNTU 12.10 Quantal current 3.5.0.17 Kernel (past 3 Kernels wont read it either) and all newest apt-get update / dist-upgrade are applied. I will post any other info you folks request as needed. Additional info as requested by githlar. $ sudo fsck.vfat /dev/sdb dosfsck 3.0.13, 30 Jun 2012, FAT32, LFN Read 512 bytes at 0:Input/output error $ lsusb Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter Bus 002 Device 002: ID 0bc2:3001 Seagate RSS LLC Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

  Read the article

• Davicom DM9601 USB LAN NIC Ubuntu 11.10 issue

  - by Gaurav_Java

  I have a davicom dm9601 USB ethernet card. When I plug in the device, it is detected and drivers are loaded, but I can't connect to internet using it. It works perfectly on XP, other laptop but not working on Ubuntu 11.10 How can I install the driver for this? I have tried many things But nothing is working. If I go to this link driver but not compiling or may I be doing something wrong. I found this one but don't know how to follow these steps . This is my lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 005 Device 002: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 Fast Ethernet Adapter Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 003 Device 003: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. But when I connected my Internet from different system its start working.

  Read the article

• USB Keyboard doesn't work in Ubuntu 14.04

  - by Steven Crossan

  My USB keyboard isn't working in Ubuntu 14.04, but also didn't work in 13.10. I upgraded today in the hope that the issue would be resolved, but it wasn't. The keyboard works in BIOS and GRUB but stops working when I reach the login screen. It is detected by the system, but just doesn't work. Output of lsusb: Bus 002 Device 002: ID 0846:9011 NetGear, Inc. WNDA3100v2 802.11abgn [Broadcom BCM4323] Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 1532:000d Razer USA, Ltd Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 060b:2231 Solid Year KSK-6001 UELX Keyboard Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub I added: hid usbhid hid_generic ohci_pci To /etc/initramfs-tools/modules and did update-initramfs -u, but that didn't work. I'm new to Ubuntu/Linux and any help you could provide would be greatly appreciated!

  Read the article

• How to create an GUI that communicate with the USB Devices

  - by VINAYAK

  I am doing my Project using win 32 programming.I am just learning about win32 programming and able to create an UI.I want to communicate with an USB Device with that UI.SO,How can i go for that?Is there any predefined functions will be there are we need to create the function for communicating with the OS and get the devices List and got the details about them. My purpose is to , 1.Creating an UI that tells about the Basic information about the device(We want to send a control request to the device to get the descriptors). 2.For that first of all i want to communicate with the OS for device attachment.That will lead to get the information about the device and Enumeration takes place and then only i request the device information through descriptors by using standard Requests. 3.And also i want to create the driver for my device.That will also need to achieve for communicating with OS(Windows). So,can anyone help me about this?How can i achieve this or approach this? Note: I am at the entry level now so anyone give response will be in a detailed format like step by step process would be appreciable.

  Read the article

• Ubuntu 12.04 LTS - Apple iPad 3 (iOS 7 non-jailbroken) USB connection problem

  - by Eldian

  I've bought an Apple iPad 3 (iOS 7 non-jailbroken), and I'm trying to connect it to my PC running Ubuntu 12.04 through the original USB cable. After I plugged in the cable, I got this message on the PC: The device 'iPad' is locked. Enter the passcode on the device and click 'Try again'. Slide to unlock on iPad, it's OK, I got this message on the PC again: The device 'iPad' is locked. Enter the passcode on the device and click 'Try again'. iPad: Trust this computer? TRUST/DON'T TRUST I've selected TRUST. PC: Unable to mount - DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) OK, I've read some forums, everywhere there was this solution: "Install: ifuse, libimobiledevice-utils, Rhythmbox OK, I've installed them through terminal, and used the idevicepair unpair && idevicepair pair command also in the terminal. Then I got this message: Device is not paired with this host. I don't know what to do. Please help!

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >