Search Results

Search found 6637 results on 266 pages for 'usr'.

Page 47/266 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• ipmi - can't ping or remotely connect

  - by Fidel

  I've tried configuring the IPMI controller to accept remote connections, but I can't even ping it. Here is it status: #/usr/local/bin/ipmitool lan print 2 Set in Progress : Set Complete Auth Type Support : NONE PASSWORD Auth Type Enable : Callback : : User : NONE PASSWORD : Operator : PASSWORD : Admin : PASSWORD : OEM : IP Address Source : Static Address IP Address : 192.168.1.112 Subnet Mask : 255.255.255.0 MAC Address : 00:a0:a5:67:45:25 IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10 BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Enabled Gratituous ARP Intrvl : 8.0 seconds Default Gateway IP : 192.168.1.1 Default Gateway MAC : 00:00:00:00:00:00 802.1q VLAN ID : Disabled 802.1q VLAN Priority : 0 RMCP+ Cipher Suites : 0,1,2,3 Cipher Suite Priv Max : uaaaXXXXXXXXXXX : X=Cipher Suite Unused : c=CALLBACK : u=USER : o=OPERATOR : a=ADMIN : O=OEM # /usr/local/bin/ipmitool user list 2 ID Name Enabled Callin Link Auth IPMI Msg Channel Priv Limit 1 true false true true USER 2 admin true false true true ADMINISTRATOR # /usr/local/bin/ipmitool channel getaccess 2 2 Maximum User IDs : 5 Enabled User IDs : 2 User ID : 2 User Name : admin Fixed Name : No Access Available : callback Link Authentication : enabled IPMI Messaging : enabled Privilege Level : ADMINISTRATOR # /usr/local/bin/ipmitool channel info 2 Channel 0x2 info: Channel Medium Type : 802.3 LAN Channel Protocol Type : IPMB-1.0 Session Support : multi-session Active Session Count : 0 Protocol Vendor ID : 7154 Volatile(active) Settings Alerting : disabled Per-message Auth : disabled User Level Auth : disabled Access Mode : always available Non-Volatile Settings Alerting : disabled Per-message Auth : disabled User Level Auth : disabled Access Mode : always available # /usr/local/bin/ipmitool chassis status System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : unknown Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false # arp Address HWtype HWaddress Flags Mask Iface 192.168.1.112 ether 00:A0:A5:67:45:25 C bond0 # /usr/local/bin/ipmitool -I lan -H 192.168.1.112 -U admin -P admin chassis power status Error: Unable to establish LAN session Unable to get Chassis Power Status In summary. It exists on the ARP list so arp's are being broadcast. I can't ping it and can't connect to it. Can anyone spot any glaring mistakes in the configuration? Many thanks, Fidel

  Read the article

• bind9 named.conf zones size limit

  - by mox601

  I am trying to set up a test environment on my local machine, and I am trying to start a DNS daemon that loads tha configuration from a named.conf.custom file. As long as the size of that file is like 3-4 zones, the bind9 daemon loads fine, but when i enter the config file i need (like 10000 lines long), bind can't startup and in the syslog i find this message: starting BIND 9.7.0-P1 -u bind Jun 14 17:06:06 cibionte-pc named[9785]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc/bind' '--localstatedir=/var' '--enable-threads' '--enable-largefile' '--with-libtool' '--enable-shared' '--enable-static' '--with-openssl=/usr' '--with-gssapi=/usr' '--with-gnu-ld' '--with-dlz-postgres=no' '--with-dlz-mysql=no' '--with-dlz-bdb=yes' '--with-dlz-filesystem=yes' '--with-dlz-ldap=yes' '--with-dlz-stub=yes' '--with-geoip=/usr' '--enable-ipv6' 'CFLAGS=-fno-strict-aliasing -DDIG_SIGCHASE -O2' 'LDFLAGS=-Wl,-Bsymbolic-functions' 'CPPFLAGS=' Jun 14 17:06:06 cibionte-pc named[9785]: adjusted limit on open files from 1024 to 1048576 Jun 14 17:06:06 cibionte-pc named[9785]: found 1 CPU, using 1 worker thread Jun 14 17:06:06 cibionte-pc named[9785]: using up to 4096 sockets Jun 14 17:06:06 cibionte-pc named[9785]: loading configuration from '/etc/bind/named.conf' Jun 14 17:06:06 cibionte-pc named[9785]: /etc/bind/named.conf.saferinternet:1: unknown option 'zone' Jun 14 17:06:06 cibionte-pc named[9785]: loading configuration: failure Jun 14 17:06:06 cibionte-pc named[9785]: exiting (due to fatal error) Are there any limits on the file size bind9 is allowed to load?

  Read the article

• Apache crashes a few seconds after the start.

  - by Nacho

  Hi, i've got a problem with apache. When i try to start it (/etc/init.d/apache2 start) it dies after a few seconds. It shows up on "ps aux" consuming a lot of memory and then dies. I don't know what could be causing apache to consume this amount of memory: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 13379 1.0 0.3 14376 3908 ? Ss 22:31 0:00 /usr/sbin/apache2 -k start www-data 13383 0.0 0.4 197316 4196 ? Sl 22:31 0:00 /usr/sbin/apache2 -k start www-data 13390 0.0 0.3 172728 4172 ? Sl 22:31 0:00 /usr/sbin/apache2 -k start www-data 13396 0.0 0.3 156336 4160 ? Sl 22:31 0:00 /usr/sbin/apache2 -k start www-data 13400 0.0 0.3 148140 4156 ? Sl 22:31 0:00 /usr/sbin/apache2 -k start www-data 13403 0.0 0.3 131748 4148 ? Sl 22:31 0:00 /usr/sbin/apache2 -k start Here is a htop screenshot: http://i.imgur.com/N4Chh.png It happened suddenly, no change had been made to server config, so i don't know whats causing it. The error log of my virtual servers shows this: [Sun Jan 30 22:19:50 2011] [alert] (11)Resource temporarily unavailable: mod_wsgi (pid=9685): Couldn't create worker thread 11 in daemon process 'fb.ebookmetafinder.com'. [Sun Jan 30 22:19:55 2011] [alert] (11)Resource temporarily unavailable: mod_wsgi (pid=9685): Couldn't create worker thread 19 in daemon process 'fb.ebookmetafinder.com'. [Sun Jan 30 22:29:40 2011] [alert] (11)Resource temporarily unavailable: mod_wsgi (pid=12009): Couldn't create worker thread 18 in daemon process 'fb.ebookmetafinder.com'. [Sun Jan 30 22:31:06 2011] [alert] (11)Resource temporarily unavailable: mod_wsgi (pid=13396): Couldn't create worker thread 15 in daemon process 'fb.ebookmetafinder.com'. [Sun Jan 30 22:35:02 2011] [alert] (11)Resource temporarily unavailable: mod_wsgi (pid=14009): Couldn't create worker thread 16 in daemon process 'fb.ebookmetafinder.com'. [Sun Jan 30 22:35:07 2011] [alert] (11)Resource temporarily unavailable: mod_wsgi (pid=14009): Couldn't create worker thread 17 in daemon process 'fb.ebookmetafinder.com'. I'm on a ubuntu server vps and i use mod_wsgi with django. Thanks.

  Read the article

• Squid: The request or reply is too large

  - by Ueli

  I have done a reverse proxy with an Apache in the background (on the same server). All works great but I can't open one page. I get the error "The request or reply is too large." In my cache.log contains: 2010/12/09 15:28:29| WARNING: http.c:971: HTTP header too large 2010/12/09 15:29:03| ctx: enter level 0: 'http://server/admin/cms/nav' 2010/12/09 15:29:03| httpProcessReplyHeader: Too large reply header 2010/12/09 15:29:03| ctx: exit level 0 In my squid.conf i disabled the limitations of the request and reply header, without success: reply_body_max_size 0 allow all request_body_max_size 0 Does someone know why that don't work? Thank you very much. Squid Version: Squid Cache: Version 2.7.STABLE3 configure options: '--prefix=/usr' '--exec_prefix=/usr' '--bindir=/usr/sbin' '--sbindir=/usr/sbin' '--libexecdir=/usr/lib/squid' '--sysconfdir=/etc/squid' '--localstatedir=/var/spool/squid' '--datadir=/usr/share/squid' '--enable-async-io' '--with-pthreads' '--enable-storeio=ufs,aufs,coss,diskd,null' '--enable-linux-netfilter' '--enable-arp-acl' '--enable-epoll' '--enable-removal-policies=lru,heap' '--enable-snmp' '--enable-delay-pools' '--enable-htcp' '--enable-cache-digests' '--enable-underscores' '--enable-referer-log' '--enable-useragent-log' '--enable-auth=basic,digest,ntlm,negotiate' '--enable-negotiate-auth-helpers=squid_kerb_auth' '--enable-carp' '--enable-follow-x-forwarded-for' '--with-large-files' '--with-maxfd=65536' 'amd64-debian-linux' 'build_alias=amd64-debian-linux' 'host_alias=amd64-debian-linux' 'target_alias=amd64-debian-linux' 'CFLAGS=-Wall -g -O2' 'LDFLAGS=' 'CPPFLAGS='

  Read the article

• Postfix "loops back to myself" error on relay to another IP address on same machine

  - by Nic Wolff

  I'm trying to relay all mail for one domain "ourdomain.tld" from Postfix running on port 2525 of one interface to another SMTP server running on port 25 of another interface on the same machine. However, when a message is received for that domain, we're getting a "mail for loops back to myself" error. Below are netstat and postconf, the contents of our /etc/postfix/transport file, and the error that Postfix is logging. (The high bytes of each IP address are XXXed out.) Am I missing something obvious? Thanks - # netstat -ln -A inet Proto Recv-Q Send-Q Local Address Foreign Address State ... tcp 0 0 XXX.XXX.138.209:25 0.0.0.0:* LISTEN tcp 0 0 XXX.XXX.138.210:2525 0.0.0.0:* LISTEN # postconf -d | grep mail_version mail_version = 2.8.4 # postconf -n alias_maps = hash:/etc/aliases allow_mail_to_commands = alias,forward bounce_queue_lifetime = 0 command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 default_privs = nobody default_process_limit = 200 html_directory = no inet_interfaces = XXX.XXX.138.210 local_recipient_maps = local_transport = error:local mail delivery is disabled mail_owner = postfix mailbox_size_limit = 0 mailq_path = /usr/bin/mailq manpage_directory = /usr/local/man message_size_limit = 10240000 mydestination = mydomain = ourdomain.tld myhostname = ourdomain.tld mynetworks = XXX.XXX.119.0/24, XXX.XXX.138.0/24, XXX.XXX.136.128/25 myorigin = ourdomain.tld newaliases_path = /usr/bin/newaliases queue_directory = /var/spool/postfix readme_directory = /etc/postfix recipient_delimiter = + relay_domains = ourdomain.tld relay_recipient_maps = sample_directory = /etc/postfix sendmail_path = /usr/sbin/sendmail setgid_group = postdrop smtpd_authorized_verp_clients = $mynetworks smtpd_recipient_limit = 10000 transport_maps = hash:/etc/postfix/transport unknown_local_recipient_reject_code = 450 # cat /etc/postfix/transport ourdomain.tld relay:[XXX.XXX.138.209]:25 # tail -f /var/log/maillog ... Aug 2 23:58:36 va4 postfix/smtp[9846]: 9858A758404: to=<nicwolff@... >, relay=XXX.XXX.138.209[XXX.XXX.138.209]:25, delay=1.1, delays=0.08/0.01/1/0, dsn=5.4.6, status=bounced (mail for [XXX.XXX.138.209]:25 loops back to myself)

  Read the article

• Configuring SASL support in libmemcached

  - by John Keyes

  I'm trying to build libmemcached with SASL support on OS X Mountain Lion. I have built memcached (1.4.15) with SASL support: $ memcached -S -vv Initialized SASL. slab class 1: chunk size 96 perslab 10922 ... slab class 42: chunk size 1048576 perslab 1 <17 server listening (binary) <18 server listening (binary) <19 send buffer was 9216, now 3728270 <20 send buffer was 9216, now 3728270 <19 server listening (udp) <20 server listening (udp) ... I am trying to build libmemcached with SASL support too. I have tried the following: $ ./configure --prefix=/usr/local \ --with-memcached-sasl=/usr/local/bin/memcached ... $ ./configure --prefix=/usr/local \ --with-memcached-sasl="/usr/local/bin/memcached -S" ... But the resulting configuration summary is the same for both: Configuration summary for libmemcached version 1.0.11 * Installation prefix: /usr/local * System type: apple-darwin12.2.0 * Host CPU: x86_64 * C Compiler: i686-apple-darwin11-llvm-gcc-4.2 (GCC) 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.11.00) * C Flags: -O2 -Werror -Wall -Wextra -std=c99 -Wbad-function-cast -Wmissing-prototypes -Wnested-externs -Woverride-init * C++ Compiler: i686-apple-darwin11-llvm-g++-4.2 (GCC) 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.11.00) * C++ Flags: -O2 -Werror -Wall -Wextra -Wpragmas -D_FORTIFY_SOURCE=2 -Waddress -Wchar-subscripts -Wcomment -Wctor-dtor-privacy -Wfloat-equal -Wformat=2 -Wmissing-field-initializers -Wmissing-noreturn -Wnon-virtual-dtor -Wnormalized=id -Woverloaded-virtual -Wpointer-arith -Wredundant-decls -Wshadow -Wshorten-64-to-32 -Wsign-compare -Wstrict-overflow=1 -Wswitch-enum -Wundef -Wunused-variable -Wwrite-strings -fwrapv -ggdb * CPP Flags: -I/usr/local/include * Assertions enabled: no * Debug enabled: no * Warnings as failure: no * SASL support: Am I doing something incorrectly? Thanks.

  Read the article

• Changing PATH Environment Variable for all Users. (Ubuntu)

  - by Wally Glutton

  I recently compiled Ruby Enterprise Edition (REE) on an Ubuntu 8.04 server. I would like to update my PATH to ensure this new version of Ruby (found in /opt/ruby_ee/bin) supersedes the older version in /usr/local/bin. (I still want the old version around, though.) I would like these PATH changes to affect all users and crontabs. Attempted Solution #1: The REE documentation recommends placing the REE bin folder at the beginning of the global PATH in /etc/environment. I altered the PATH in this file to read: PATH="/opt/ruby_ee/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" This did not affect my PATH at all. Attempted Solution #2: Next I followed these instructions and updated the PATH setting in /etc/login.defs and /etc/crontab. (I did not change /etc/sudoers.) This didn't affect my PATH either, even after logging out and rebooting the server. Other information: I seem to be having the same problem described here. I'm testing using the commands "echo $PATH" and "ruby -v". My shell is bash. My .bashrc doesn't override my PATH. Yes, I have heard of the Ruby Version Manager project. ;)

  Read the article

• Mac OS X: Update Python for Shell

  - by Nathan G.

  So, I see similar questions, but none of the answers work for me. I updated Python to 3.1.3 from 2.6.1. Everything works, except: When I type python into Terminal, I get: Python 2.6.1 (r261:67515, Jun 24 2010, 21:47:49) [GCC 4.2.1 (Apple Inc. build 5646)] on darwin Type "help", "copyright", "credits" or "license" for more information. >>> So, how do I change the version of Python that runs in the Shell? I've tried the script that they provide. It adds their directory to my $PATH, but it still doesn't change the version that'd displayed from Terminal. Here's what I get when I echo $PATH: /Library/Frameworks/Python.framework/Versions/3.1/bin:/Library/Frameworks/Python.framework/Versions/3.1/bin:/Library/Frameworks/Python.framework/Versions/3.1/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin It appears that the script provided has added their directory for every time I ran the script (I tried it a few times, naturally). I'll gives links to caps of what is in the other relevant folders it mentions: /Library/Frameworks/Python.framework/Versions/3.1/bin /usr/local/bin /usr/bin Thakns in advance for any ideas!

  Read the article

• MySQL (local) owner and permissions

  - by Steve Nelson

  I asked this question on the MySQL forums and got no answer. I asked on StackOverflow and received a recommendation to try on ServerFault. So here I am. I recently successfully installed the 64 bit version of mysql-5.5.8 on a MacBook Pro in the /usr/local directory. To address a completely unrelated software (RVM actually) , I chown-ed my /usr/local directory to $USER, Which made MySQL very unhappy. It complained specifically about the /usr/local/mysql/data directory, so I chown-ed that directory to _mysql:wheel. Everything appears to work again, but it made me wonder if I would have been better off changing the owner of the whole /usr/local/mysql directory, not just the data subdirectory. Since I neglected to make notes of what owner the default installation runs under before rashly changing the owner of the /usr/local directory, could someone tell me what owner and permissions the /usr/local/mysql directory is by default if you don't inadvertently screw it up? :-/ In terms of permissions I'm guessing rwxr-xr-x would be appropriate (that's what the data directory currently has and it appears to be working fine), but reinforcement for that hunch would be appreciated. Thanks for any help. Steve

  Read the article

• Systemd Service Start With Dynamic Port Value From Docker

  - by Sheriffen

  Using CoreOS, Docker and systemd to manage my services I want to properly perform service discovery. Since CoreOS utilizes etcd (distributed key-value) there is a very convenient way to do this. On systemd's ExecStartPost I can just insert the started service into etcd without problems. My usecase needs something like this: ExecStartPost=/usr/bin/etcdctl set /services/myServiceName '{ \"host\": \"%H\", \"port\": 5555 }' which works like a charm. But this is where my idea popped up. Docker has the power to randomly assign a port if I just run docker run -p 5555 which is awesome since I don't have to set it statically in the *.service file and I could possibly run multiple instances on the same host. What if I could get the randomly assigned port and insert instead of the static 5555? Turns out I can use the docker port command to get the port and with some formatting we can get just the port with $(echo $(/usr/bin/docker port my-container-name 5555) | cut -d':' -f2) which works if I set it (using bash) like this: /usr/bin/etcdctl set /services/myServiceName '{ \"host\": \"%H\", \"port\": '$(echo $(/usr/bin/docker port my-container-name 5555) | cut -d':' -f2)' }' but using systemd I just can't get it to work. This is the code I'm using: ExecStartPost=/usr/bin/etcdctl set /services/myServiceName '{ \"host\": \"%H\", \"port\": '$(echo $(/usr/bin/docker port my-container-name 5555) | cut -d':' -f2)'}' Somehow I got something wrong but it's hard to debug since it works when typed in the terminal.

  Read the article

• Remove an apache alias subdirectory

  - by Hippyjim

  I'm using Apache 2 on Ubuntu 12.04. I added an alias for a subdirectory, to point to gitweb. I realised I should probably make it accessible only on https - so I removed the alias and restarted Apache. I can still navigate to http://xyz/gitweb - even with no alias in any of my config files. How do I remove it? EDIT The config file looked like this before: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /home/administrator/webroot <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/administrator/webroot/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> Alias /gitweb/ /usr/share/gitweb/ <Directory /usr/share/gitweb/> Options ExecCGI +FollowSymLinks +SymLinksIfOwnerMatch AllowOverride All order allow,deny Allow from all AddHandler cgi-script cgiDirectory Index gitweb.cgi </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> And this after: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /home/administrator/webroot <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/administrator/webroot/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost>

  Read the article

• How to I configure open_basedir parameter under my Centos VPS?

  - by deltanovember

  The parameter can be seen here http://wordswithfriends.net/test.php open_basedir /var/www/vhosts/wor.wordswithfriends.net/wordswithfriends.net/:/tmp I'm trying to add PHP pear directories /var/www/vhosts/wor.wordswithfriends.net/conf is as follows -rw-r----- 1 root apache 6461 Jan 25 08:56 12959674170.16899500_httpd.include -rw-r----- 1 root apache 6461 Jan 31 06:52 12960111810.31860800_httpd.include -rw-r----- 1 root apache 6532 Jan 31 06:55 12964785250.54523600_httpd.include -rw-r----- 1 root apache 6532 Jan 31 07:01 12964788880.47252600_httpd.include -rw-r----- 1 root apache 6532 Jan 31 15:54 12965108850.92819600_httpd.include -rw-r----- 1 root apache 6652 Jan 31 21:32 12965206700.32285200_httpd.include Currently configured as follows grep base 12965206700.32285200_httpd.include php_admin_value open_basedir /var/www/vhosts/wor.wordswithfriends.net/httpdocs/:/tmp/:/usr/share/pear/:/local/PEAR/ php_admin_value open_basedir /var/www/vhosts/wor.wordswithfriends.net/httpdocs/:/tmp/:/usr/share/pear/:/local/PEAR/ php_admin_value open_basedir /var/www/vhosts/wor.wordswithfriends.net/httpdocs/:/tmp/:/usr/share/pear/:/local/PEAR/ php_admin_value open_basedir /var/www/vhosts/wor.wordswithfriends.net/httpdocs/:/tmp/:/usr/share/pear/:/local/PEAR/ Configured vhost.conf as follows <Directory /var/www/vhosts/wor.wordswithfriends.net/wordswithfriends.net> <IfModule sapi_apache2.c> php_admin_flag engine on php_admin_flag safe_mode off php_admin_value open_basedir "/var/www/vhosts/wor.wordswithfriends.net:/tmp:/usr/share/pear/local/PEAR" </IfModule> <IfModule mod_php5.c> php_admin_flag engine on php_admin_flag safe_mode off php_admin_value open_basedir "/var/www/vhosts/wor.wordswithfriends.net:/tmp:/usr/share/pear:/local/PEAR" </IfModule> </Directory> Restarted apache and the parameter is still the same. I'm not sure why my pear directories are not showing up. I'm using Plesk. Any help appreciated

  Read the article

• apache segmentation error

  - by lush

  I can't start Apache with the following errors: [root@web]# /etc/init.d/httpd start Starting httpd: /bin/bash: line 1: 19232 Segmentation fault /usr/sbin/httpd [root@web]# /usr/sbin/apachectl -k start /usr/sbin/apachectl: line 102: 19919 Segmentation fault $HTTPD $OPTIONS $ARGV I use webmin control panel and I've already tried re-installing Apache from scratch. Can someone advise what else I should try to do? Many thanks. UPDATE: The only line is always written in the error logs which seems not to be very important: [Mon Nov 14 19:00:09 2011] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) UPDATE 2: I've recently had the error below in the logs. Looks like some modules are incompatible, so I've just disabled these extensions: fileinfo and mcrypt in my php.ini. I should be able to start the web server without them. PHP Warning: PHP Startup: fileinfo: Unable to initialize module\nModule compiled with module API=20050922, debug=0, thread-safety=0\nPHP compiled with module API=20060613, debug=0, thread-safety=0\nThese options need to match\n in Unknown on line 0 PHP Warning: Module 'mcrypt' already loaded in Unknown on line 0 UPDATE 3: [root@web]# file /usr/sbin/httpd /usr/sbin/httpd: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), for GNU/Linux 2.6.9, stripped [root@web]# uname -m x86_64

  Read the article

• java warnings on linux

  - by Geo Papas

  Hello i am getting warnings after i have installed java on kubuntu 11.10. The java programs run but i always get 4 warnings: $ java Warning: no leading - on line 1 of `/usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg' Warning: missing VM type on line 1 of `/usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg' Warning: no leading - on line 1 of `/usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg' Warning: missing VM type on line 1 of `/usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg' What am i missing? Thanks in advance! Here is the file content /usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg : /usr/lib/jvm/java-6-sun # # %W% %E% # # Copyright (c) 2006, Oracle and/or its affiliates. All rights reserved. # ORACLE PROPRIETARY/CONFIDENTIAL. Use is subject to license terms. # # List of JVMs that can be used as an option to java, javac, etc. # Order is important -- first in this list is the default JVM. # NOTE that this both this file and its format are UNSUPPORTED and # WILL GO AWAY in a future release. # # You may also select a JVM in an arbitrary location with the # "-XXaltjvm=<jvm_dir>" option, but that too is unsupported # and may not be available in a future release. # -server KNOWN -client IGNORE -hotspot ERROR -classic WARN -native ERROR -green ERROR

  Read the article

• zsh : How to list directory content with tab?

  - by Philippe CM

  I just switched from BASH to ZSH and thing are pretty good, but: when I start typing cd /usr/share/s and hit TAB, this is what I get : $ cd /usr/share/sane/ sane/ skype/ ssl-cert/ screen/ smplayer/ strigi/ seed-gtk3/ snmp/ synaptic/ sgml/ software-properties/ system-config-printer/ sgml-base/ soprano/ sysv-rc/ sgml-data/ sounds/ simple-scan/ splashy/ And this is ok. If I then hit TAB again, I get $ cd /usr/share/screen/, the next candidate, witch is also OK. (BTW, how do I cycle back to the previous candidate? Sorry, on to my question) Now what if I want to see the contents of /usr/share/screen/ now ? You now, BASH-style? The cursor is at the end of the line, will I have to ctrl-a (or home), then del del (to erase cd) then ls then ENTER? That seems like a lot of typing. (And it - possibly unnecessarily - enters the command in the history) Would not there be a key (maybe modifier-TAB? but the obvious candidates are already taken by the desktop... I digress) that would tell zsh to stop cycling through /usr/share/ and instead, just list the content /usr/share/screen/ ?

  Read the article

• Ruby on Rails: How do I remove a gem path? (I have two for some reason)

  - by sjsc

  I'm looking to remove a gem path (/home/sjsc/.ge/ruby/1.8). For some reason, I have two, and I can't seem to install gems correctly. When I do "gem env", here's what I get: RubyGems Environment: - RUBYGEMS VERSION: 1.3.6 - RUBY VERSION: 1.8.7 (2009-06-12 patchlevel 174) [i486-linux] - INSTALLATION DIRECTORY: /usr/lib/ruby/gems/1.8 - RUBY EXECUTABLE: /usr/bin/ruby1.8 - EXECUTABLE DIRECTORY: /usr/bin - RUBYGEMS PLATFORMS: - ruby - x86-linux - GEM PATHS: - /usr/lib/ruby/gems/1.8 - /home/sjsc/.gem/ruby/1.8 Any idea on how to remove the "/home/sjsc/.gem/ruby/1.8" from the "GEM PATHS"?

  Read the article

• Trying to include a library, but keep getting 'undefined reference to' messages

  - by KU1

  I am attempting to use the libtommath library. I'm using the NetBeans IDE for my project on Ubuntu linux. I have downloaded and built the library, I have done a 'make install' to put the resulting .a file into /usr/lib/ and the .h files into /usr/include It appears to be finding the files appropriately (since I no longer get those errors, which I did before installing into the /usr directories). However, when I create a simple main making a call to mp_init (which is in the library), I get the following error when I attempt to make my project: mkdir -p build/Debug/GNU-Linux-x86 rm -f build/Debug/GNU-Linux-x86/main.o.d gcc -c -g -MMD -MP -MF build/Debug/GNU-Linux-x86/main.o.d -o build/Debug/GNU-Linux-x86/main.o main.c mkdir -p dist/Debug/GNU-Linux-x86 gcc -o dist/Debug/GNU-Linux-x86/cproj1 build/Debug/GNU-Linux-x86/main.o build/Debug/GNU-Linux-x86/main.o: In function 'main': /home/[[myusername]]/NetBeansProjects/CProj1/main.c:18: undefined reference to `mp_init' collect2: ld returned 1 exit status make[2]: *** [dist/Debug/GNU-Linux-x86/cproj1] Error 1 So, it looks like the linker can't find the function within the library, however it IS there, so I just don't know what could be causing this. Any help would be appreciated. I get the same error if I type the gcc command directly and skip the makefile, I also made sure the static library got compiled with gcc as well. Edited to Add: I get these same errors if I do the compile directly and add the library with -l or -L: $ gcc -l /usr/lib/libtommath.a main.c /usr/bin/ld: cannot find -l/usr/lib/libtommath.a collect2: ld returned 1 exit status $ gcc -llibtommath.a main.c /usr/bin/ld: cannot find -llibtommath.a collect2: ld returned 1 exit status $ gcc -Llibtommath.a main.c /tmp/ccOxzclw.o: In function `main': main.c:(.text+0x18): undefined reference to `mp_init' collect2: ld returned 1 exit status $ gcc -Llibtommath.a main.c /tmp/ccOxzclw.o: In function `main': main.c:(.text+0x18): undefined reference to `mp_init' collect2: ld returned 1 exit status I am very rusty on this stuff, so I'm not sure I'm using the right command here, in the -L examples are the libraries being found? If the library isn't being found how on earth do I get it to find the library? It's in /usr/lib, I've tried it with the .a file in the current directory, etc. Is there an environment variable I need to set? If so, how, etc. Thanks so much for the help. I've tried a completely different library (GMP) and had the EXACT same problem. This has got to be some kind of Ubuntu environment issue? Anyone have any idea how to fix this?

  Read the article

• Python, SWIG and other strange things

  - by wanderameise

  hey, I have a firmware for an USB module I can already control by visual C. Now I want to port this to python. for this I need the octopus library which is written in c. I found a file called octopus_wrap which was created by SWIG! then I found a makefile which says: python2.5: swig -python -outdir ./ ../octopus.i gcc -fPIC -c ../../liboctopus/src/octopus.c gcc -fPIC -c ../octopus_wrap.c -I /usr/include/python2.5 gcc -fPIC -shared octopus_wrap.o octopus.o /usr/lib/libusb.so -o _octopus.so python2.4: swig -python -outdir ./ ../octopus.i gcc -fPIC -c ../../liboctopus/src/octopus.c gcc -fPIC -c ../octopus_wrap.c -I /usr/include/python2.4 gcc -fPIC -shared octopus_wrap.o octopus.o /usr/lib/libusb.so -o _octopus.so win: gcc -fPIC -c ../../liboctopus/src/octopus.c -I /c/Programme/libusb-win32-device-bin-0.1.10.1/include gcc -fPIC -c octopus_wrap.c -I /c/Python25/libs -lpython25 -I/c/Python25/include -I /c/Programme/libusb-win32-device-bin-0.1.10.1/include gcc -fPIC -shared *.o -o _octopus.pyd -L/c/Python25/libs -lpython25 -lusb -L/c/Programme/libusb-win32-device-bin-0.1.10.1/lib/gcc clean: rm -f octopus* _octopus* install_python2.4: cp _octopus.so /usr/local/lib/python2.4/site-packages/ cp octopus.py /usr/local/lib/python2.4/site-packages/ install_python2.5: cp _octopus.so /usr/local/lib/python2.5/site-packages/ cp octopus.py /usr/local/lib/python2.5/site-packages/ I dont know how to handle this but as far as I can see octopus.py and _octopus.so are the resulting output files which are relevant to python right? luckily someone already did that and so I put those 2 files to my "python26/lib" folder (hope it doesnt matter if it´s python 2.5 or 2.6?!) So when working with the USB device the octopus.py is the library to work with! Importing this file makes several problems: >>> Traceback (most recent call last): File "C:\Users\ameise\My Dropbox\µC\AVR\OCTOPUS\octopususb-0.5\demos\python \blink_status.py", line 8, in <module> from octopus import * File "C:\Python26\lib\octopus.py", line 7, in <module> import _octopus ImportError: DLL load failed: module not found. and here´s the related line 7 : import _octopus So there´s a problem considering the .so file! What could be my next step? I know that´s a lot of confusing stuff but I hope anyone of you could bring some light in my mind! thy in advance

  Read the article

• "tracing" version of readlink(1)

  - by jonrock

  I would like a version of "readlink -f" that provides a trace of every individual symlink resolution it performs. Something like: $ linktrace /usr/lib64/sendmail /usr/lib64 -> lib /usr/lib/sendmail -> ../sbin/sendmail /usr/sbin/sendmail $ I know I have used this utility in the past, on linux, and also remember at the time thinking "the name of this tool is completely unintuitive and I will forget it". Well, that day has arrived.

  Read the article

• Howto install acts_as_xapian on Ubuntu

  - by normalocity

  I've run into some great resources for installing "acts_as_xapian", and the supporting native libraries that are necessary to make it work. I've even got it to work well on my dev machine (OS X). However, I've followed the instructions on this site, and it doesn't work on my Ubuntu 9.10 (Karmic) production box. After successfully installing the "core" and "bindings" for xapian, the start of the mongrel server fails with the following: => Booting Mongrel => Rails 2.3.5 application starting on http://0.0.0.0:3000 acts_as_xapian: No Ruby bindings for Xapian installed /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:105:in `const_missing': uninitialized constant ActsAsXapian::Search::Xapian (NameError) from /var/lib/gems/1.8/gems/acts_as_xapian-0.1.3/lib/acts_as_xapian/search.rb:8 from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:521:in `new_constants_in' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' from /var/lib/gems/1.8/gems/acts_as_xapian-0.1.3/lib/acts_as_xapian.rb:2 from /var/lib/gems/1.8/gems/acts_as_xapian-0.1.3/lib/acts_as_xapian.rb:1:in `each' from /var/lib/gems/1.8/gems/acts_as_xapian-0.1.3/lib/acts_as_xapian.rb:1 from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:521:in `new_constants_in' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/rails/gem_dependency.rb:208:in `load' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/initializer.rb:307:in `load_gems' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/initializer.rb:307:in `each' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/initializer.rb:307:in `load_gems' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/initializer.rb:164:in `process' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/initializer.rb:113:in `send' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/initializer.rb:113:in `run' from /home/feelgoodtrader/feelgoodtrader/config/environment.rb:13 from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:521:in `new_constants_in' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/commands/server.rb:84 from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `require' from script/server:3

  Read the article

• Quick question about open_basedir

  - by Gio

  Hello, On my server, I have following setting: open_basedir /home/ :/usr/lib/php :/usr/local/lib/php :/tmp/ :/usr/local/ :/usr/bin Now, I am little bit confused about ending / in the / home / setting, does that mean that all subfolders inside home have same rights? or does it mean that only home files can be accessed? So, basically what is the main difference between: /home/ and /home With example if possible Thank you in advance.

  Read the article

• Best practice for setting up wsgi on root directory?

  - by Timmy

  what's the best ways to mix static files and wsgi app served on the root directory? http://code.google.com/p/modwsgi/wiki/QuickConfigurationGuide recommends setting up WSGIScriptAlias / /usr/local/www/wsgi-scripts/myapp.wsgi and alias other directories and files: Alias /robots.txt /usr/local/www/documents/robots.txt Alias /favicon.ico /usr/local/www/documents/favicon.ico Alias /media/ /usr/local/www/documents/media/ is there a cleaner way to do this?

  Read the article

• Check if a program exists in bash

  - by ~rojanu

  I am trying to check if md5sum or digest exists on solaris and script is used on different machines. Here is the function in sh script which is called from a ksh script getMD5cmd () { PATH="${PATH}:/bin:/usr/bin:/usr/sfw/bin:/usr/local/bin:/usr/sbin/bin" if type -p md5sum;then MD5CMD=`type -p md5sum` elif type -p digest;then MD5CMD="`type -p digest` -a md5" fi echo "HERE ${MD5CMD}" } When I run scripts I get -p not found md5sum not found -p not found digest is /bin/digest HERE However, when I type it in a terminal, works as exptected Any Ideas? Thanks

  Read the article

• How do I use Perl's chdir operator?

  - by T. Gruhn

  In ksh, I'd use cd /usr/src/sys How should I write it in Perl? A conversion such as cd /usr/src/sys ---> chdir '/usr/src/sys' Maybe the following would be better: execute "chdir '/usr/src/sys' "

  Read the article

• ubuntu bind9 AppArmor read permission denied (chroot jail)

  - by Richard Whitman

  I am trying to run bind9 with chroot jail. I followed the steps mentioned at : http://www.howtoforge.com/debian_bind9_master_slave_system I am getting the following errors in my syslog: Jul 27 16:53:49 conf002 named[3988]: starting BIND 9.7.3 -u bind -t /var/lib/named Jul 27 16:53:49 conf002 named[3988]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc/bind' '--localstatedir=/var' '--enable-threads' '--enable-largefile' '--with-libtool' '--enable-shared' '--enable-static' '--with-openssl=/usr' '--with-gssapi=/usr' '--with-gnu-ld' '--with-dlz-postgres=no' '--with-dlz-mysql=no' '--with-dlz-bdb=yes' '--with-dlz-filesystem=yes' '--with-dlz-ldap=yes' '--with-dlz-stub=yes' '--with-geoip=/usr' '--enable-ipv6' 'CFLAGS=-fno-strict-aliasing -DDIG_SIGCHASE -O2' 'LDFLAGS=-Wl,-Bsymbolic-functions' 'CPPFLAGS=' Jul 27 16:53:49 conf002 named[3988]: adjusted limit on open files from 4096 to 1048576 Jul 27 16:53:49 conf002 named[3988]: found 4 CPUs, using 4 worker threads Jul 27 16:53:49 conf002 named[3988]: using up to 4096 sockets Jul 27 16:53:49 conf002 named[3988]: loading configuration from '/etc/bind/named.conf' Jul 27 16:53:49 conf002 named[3988]: none:0: open: /etc/bind/named.conf: permission denied Jul 27 16:53:49 conf002 named[3988]: loading configuration: permission denied Jul 27 16:53:49 conf002 named[3988]: exiting (due to fatal error) Jul 27 16:53:49 conf002 kernel: [74323.514875] type=1400 audit(1343433229.352:108): apparmor="DENIED" operation="open" parent=3987 profile="/usr/sbin/named" name="/var/lib/named/etc/bind/named.conf" pid=3992 comm="named" requested_mask="r" denied_mask="r" fsuid=103 ouid=103 Looks like the process can not read the file /var/lib/named/etc/bind/named.conf. I have made sure that the owner of this file is user bind, and it has the read/write access to it: root@test:/var/lib/named/etc/bind# ls -atl total 64 drwxr-xr-x 3 bind bind 4096 2012-07-27 16:35 .. drwxrwsrwx 2 bind bind 4096 2012-07-27 15:26 zones drwxr-sr-x 3 bind bind 4096 2012-07-26 21:36 . -rw-r--r-- 1 bind bind 666 2012-07-26 21:33 named.conf.options -rw-r--r-- 1 bind bind 514 2012-07-26 21:18 named.conf.local -rw-r----- 1 bind bind 77 2012-07-25 00:25 rndc.key -rw-r--r-- 1 bind bind 2544 2011-07-14 06:31 bind.keys -rw-r--r-- 1 bind bind 237 2011-07-14 06:31 db.0 -rw-r--r-- 1 bind bind 271 2011-07-14 06:31 db.127 -rw-r--r-- 1 bind bind 237 2011-07-14 06:31 db.255 -rw-r--r-- 1 bind bind 353 2011-07-14 06:31 db.empty -rw-r--r-- 1 bind bind 270 2011-07-14 06:31 db.local -rw-r--r-- 1 bind bind 2994 2011-07-14 06:31 db.root -rw-r--r-- 1 bind bind 463 2011-07-14 06:31 named.conf -rw-r--r-- 1 bind bind 490 2011-07-14 06:31 named.conf.default-zones -rw-r--r-- 1 bind bind 1317 2011-07-14 06:31 zones.rfc1918 What could be wrong here?

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >