Search Results

Search found 1795 results on 72 pages for 'veritas cluster'.

Page 47/72 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• What happens when the USB key or SD card I've installed VMware ESXi on fails?

  - by ewwhite

  An SD (SDHC) card installed in an HP ProLiant DL380p Gen8 server running VMware ESXi just failed. I encountered some rather ominous looking messages on the vCenter console and in the HP ProLiant ILO event log... Lost connectivity to the device ... backing the boot filesystem. As a result, host configuration changes will not be saved to persistent storage. Embedded Flash/SD-CARD: Error writing media 0, physical block 848880: Stack Exception. VMware advocates the use of USB and SD (SDHC) boot devices for ESXi. It was one of the main reasons the smaller footprint ESXi was developed (versus the older ESX). I've spent much time highlighting the differences between ESXi's installable and embedded modes to coworkers and clients. However, these failures do seem to happen. In this case, this is my third instance. Luckily, this is a vSphere cluster with SAN storage. What steps should be taken to remediate this failure?

  Read the article

• Backing up Information Store - Recovering to Different Information Store / RSG

  - by Kip

  Hi All, I have a question on a situation, that hasn't yet arrisen but I wondered the possibilities and how we go about it. Currently we backup our Exchange 2003 Cluster with Backup exec. Currently it is set to backup the Microsoft Information Store on that server and all of the Mailbox Stores beneath it. We have previously used this in conjunction with a recovery storage group on the same server to recover lost mailboxes. However, due to space constrictions on that server ( a seperate issue that is being addressed in the very near future but outside of the scope of this question) we now don't have enough space on that server to do a recovery storage group type restore. Is it possible, to restore an information store, to a different server in the same administrative group (ie first)? By that I mean we have the following: Server1 | First Storage Group | Mailbox Store1/2/3 Could Mailbox Store 1 be restored to: Server2 | First Storage Group | Recovery Storage Group Both servers are under the same Administrative Group Currently for whatever reason ( mainly time) the mailboxes are not being backed up individually. Regards Kip

  Read the article

• Connection lost to iscsi san after problem with san

  - by marceldejager

  Hi there, We have a cluster running with 3 VSpere ESX4 server that all are connected to a lefthand san through iSCSI. This all worked well but a week ago there was a problem with the san. After fixing that problem the VMWARE server continued working but this weekend I saw that 1 server didn't have a connection with the SAN. The other two work perfecly. I looked at all setting and I cannot find a problem. Nowhere I can't find any erros. Has anybode a idea? Thanks, Marcel

  Read the article

• NetApp and SQL Server?

  - by Edinor

  Do you have any good or bad experiences to share running SQL Server OLTP Systems on NetApp appliances? I have been working with a small, relatively low-volume cluster with a lower-end NetApp device, and I have found the environment to be generally unstable, at least compared to my experiences with other SANs, iSCSI arrays, and DAS setups. I struggle to believe that RAID DP and WAFL are more than fairy-dust technologies. A solution has been proposed to me that I just need a bigger, better NetApp, with PAM cards and other cool technology I've not heard of, and I feel like I would be better off spending a quarter of that on good direct-attached drives and a beefy server. At the same time, I feel that an Enterprise-class SAN should be something I can count on to be consistently a more stable, better performer than the less expensive solution I might propose. Are you a SQL Server DBA in an OLTP environment and love your NetApp? If you don't like them, why not?

  Read the article

• NLB 2 Windows Server 2003 Servers

  - by Paul Hinett

  I need to configure windows NLB on 2 dedicated servers I have. My main machine has been running for some time, with several domain names pointing to the servers primary IP address. Both servers have 2 NIC's installed, and both have several secondary public IP addresses available if needed? What IP address would I use for the cluster IP, does this IP need to be added to the IP list of both public NIC's ip address list? What IP addresses do I use for the host's dedicated IP? Please help, this is driving me nuts...i've taken down the server twice on accident today! Thank you in advance!

  Read the article

• How can I expire non-active sessions on my Netscreen SSG140?

  - by David Mackintosh

  I have a Juniper Netscreen SSG-140. While experimenting with a VoIP service, I defined a custom policy that was to be used to permit the possible ports in use to be sent back to the VoIP server from systems connecting across the internet. Because I'd had problems in the past with VoIP systems getting broken when their UDP sessions were expired out faster than their keep-alives were generated, I set the timeout on this custom service to be 'never'. After much experimentation, I happened to notice that my session count on the firewall has grown from a couple thousand to over 36000. After discussion with the VoIP "expert", I set the timeout to be 30 minutes; however, all the sessions set up during the experimentation process are still there, more than 3 days later. Is there a way I can force these old sessions to get expired and removed from the session table, or am I looking at resetting my firewall? (Both firewalls, actually -- they are in a cluster.)

  Read the article

• Exchange 2007 CCR: Logs not replicating to passive node partition

  - by yum_tacos4u

  In my environment I have setup Exchange 2007 in an CCR cluster, mirroring our main servers to a set of servers in passive mode. One of the partitions on the passive node that I have setup for the logs for Exchange 2007 has faulted, causing the partition to be unreadable. I have replaced the partition on the passive node, and setup the drive to mirror the one in active mode, but the logs are not replicating since the change. Is there anyway to force the replication of the new drive for the logs to the new partition? Any idea why the logs are not replicating? Any help or comments is appreciated, and thanks in advance.

  Read the article

• Citrix XenServer iSCSI shared disk?

  - by chsguy

  I am running Citrix XenServer Essentials 5.5, with VMs stored on an EqualLogic iSCSI shelf, using XenServer's StorageLink. I would like to create a "virtual disk" that can be attached to multiple VMs. This would be used for a cluster file system like OCFS2 or GFS. This doesn't seem possible using the XenCenter GUI and I can't find anything online about how to do it. I realize I could simply expose the iSCSI network to the VM and have the VM initiate its own iSCSI, but that creates a lot of security challenges. This was pretty easy to do on Oracle VM Server, which is Xen based, so I know it's not a limitation of Xen itself. Maybe there is an "xe-" command for this? Thanks for any suggestions you can provide.

  Read the article

• Find and free disk space that is unused but unavailable (due to file system error, etc.)

  - by Voyagerfan5761

  Sometimes I get the feeling that if an app such as μTorrent allocates files on my FAT32-formatted flash drive, but then is killed or crashes (as happens more than a few times a month), that space just disappears from my file system. Whether or not that is the case, sometimes I do get a chill from wondering if I've lost hundreds of MB in available storage due to carelessness or malfunctions. Checking my disk with WinDirStat just makes it worse, because I see the huge "<Unknown>" item at the disk root staring at me, eating up well over a gigabyte. It might be FS inefficiency (due to 32 or 64kb sector/cluster size and a lot of tiny files) or it might be a glitch... Is there a tool I can download and run to check my file system and make sure that there aren't any unused allocated blocks on the disk? I want to make sure I'm not losing any disk space to I/O errors, etc.

  Read the article

• Windows FAT/NTFS Low-Level Disk Viewer (Norton DiskEdit alternative)

  - by Synetech inc.

  Hi, One of my most valuable software tools has always been Norton DiskEdit from Norton Utilities/Symantec Systemworks. I have used it for years for so many things, including, but not limited to learning file-systems. I am now in search of a similar tool that can let me view FAT and NTFS disks at a low and high level under Windows. I have seen Runtime Software’s DiskExplorer, but unfortunately, it is limited in a number of ways, particularly annoying is that it does not really let you view the disk as structured (it does not let you see directory entries from a directory that is fragmented like DiskEdit can without doing a too-exhaustive scan which doesn’t even work for FAT partitions that have cluster sizes <4KB). Does anyone know of a Windows alternative of a Norton DiskEditor? Thanks a lot.

  Read the article

• Sun Grid Engine: Automatically Terminating Idle Interactive Jobs

  - by dmcer

  We're considering using Sun Grid Engine on a small compute cluster. Right now, the current set up is pretty crude and just involves having people ssh to an open machine to run their jobs. We'd like to allow interactive jobs, since that should ease the transition from manually starting jobs to starting them using qsub. But, there is some concern that, if we do, people might accidentally leave their interactive sessions idle and block other jobs from being run on the machines. The issue isn't just theoretical, since we previously tried using OpenPBS and there was a problem with people opening up an interactive job in a screen session and essentially camping on a machine. Is there anyway to configure SGE to automatically kill idle interactive jobs? It looks like this was requested as an enhancement (Issue #:2447) way back in 2007. But, it doesn't seem like the request ever got implemented.

  Read the article

• Implementing a Linux-HA based clustering setup on Windows

  - by Alex

  I have a (tried and tested) setup involving: 2x Load balancing nodes on a floating IP via Heartbeat, load balancing 2 tomcat servers. 2x Tomcat servers 2x Galera Cluster MySQL servers synchronously replicating (+1 arbitrator node) All are evenly spread across 2 physical nodes. Now, I have to somehow get the same functionality on Windows Server (2008? I think) nodes .... running under Xen virtualization. There is no possibility to use Linux for any of the nodes. I count two main problems: No Linux-HA hearbeat daemon for the load balancing No Galera synchronous replication for MySQL I freely admit to having nearly no Windows knowledge when it comes to clustering. Is there a way to closely mimic the setup I have described or is it a total write-off?

  Read the article

• HP DL580 G5 Hyper-V networking problem

  - by mr-perfect

  Hi I have installed the hyper-v role on a DL580 G5 cluster. The host operating system is a server 2008 x64 patched to the maximum. Everything has gone fine, but if I install a guest operating system, actually a windows server 2008 x64 I can't reach the network from it. It send many packets, but don't received any, so I can't ping the external network as well. I have installed the latest drivers to the server and unintalled the network configuration utility from the physical server, but no luck. I added a legacy adapter to the guest binded to the same phisycal adapter on the host machine but it can't help Any idea welcome...

  Read the article

• High Memory Utilization on weblogic

  - by Anup

  My Weblogic App Server shows high Memory Utization. The application seems to perform good without any memeory issues. Now that my traffix is going to increase i am worried about the memory and have a feeling things could go bad and need to take action now and i am confused as to should i increase The JVM memory on the weblogic instances which means adding more physical memory or should i increase the number of managed instances in the cluster. Would like to understand what does having high memory utilization mean and the advantage and disadvantages of adding JVM memory and adding managed instances. Thanks

  Read the article

• What's the difference between keepalived and corosync, others?

  - by Matt

  I'm building a failover firewall for a server cluster and started looking at the various options. I'm more familiar with carp on freebsd, but need to use linux for this project. Searching google has produced several different projects, but no clear information about features they provide . CARP gave virtual interfaces that failover, I am not really clear on whether that's what corosync does, or is that what pacemaker does? On the other hand I did get manage to get keepalived working. However, I noted that corosync provides native support for infiniband. This would be useful for me. Perhaps someone could shed some light on the differences between: corosync keepalive pacemaker heartbeat Which product would be the best fit for router failover?

  Read the article

• How to Remove a VM From Hyper-V Without Deleting the Configuration File?

  - by Steven Murawski

  I'm in the process of moving a number of virtual machines that are homed on shared storage (a file share, though shared cluster disk would work as well) to a new VM host with access to the same shared storage. The new host is a different build version (moving from Windows Server 2012 Beta to Windows Server 2012 RC - though this same process could be used with migrations of Windows Server 2008/2008 R2 to Windows Server 2012 as well), so I cannot migrate the machine with inbox tooling. I need to remove the VM from management of the source Hyper-V host in order to import the VM to the new Hyper-V host. I want to retain the configuration file, so I can import the VM as it stands and not need to reconfigure it. The VHD files are rather large and they are staying on the same file share, so I'd rather not duplicate them during the move process.

  Read the article

• m23 vs webmin vs landscape vs whatever you can propose, I need software to mantain a bunch of debian

  - by marc.riera

  Hello, I know there is landscape from canonical, but it has some $$ costs. Als there is webmin, and it can be used as a cluster management tool. Also there is m23, probably the most usable and interesting peace of manager software. But, what would you suggest to install and use on following configuration: 1) 100 desktop users, against an AD with quest authentication services installed. (ubunt8.04,9.04,9.10,10.04) 2) 50 servers (debian sid, lenny , ubuntu 8.04 and 10.04) We work on different software, so each group of persons need different configurations, each server has different pourposses, nothing is clusterized. And we have a good enough backup software. So , my objectives are: - easy install (deploy) - good reporting - easy logonscripts for users - easy bootupscripts for servers Thanks all for reading, and more thanks for your time. Marc

  Read the article

• RDMA architecture - do you need adapters on both ends?

  - by Bobb

  I know Linux can use RDMA NICs like Solarflare... I just found Intel has something like that NetEffect cards. But Intel is talking all about clusters.. Can someone please explain. If I want low-latency networking and install RDMA NIC on my server. Is there limitation on where the cable can go? Is there a specific device expected on the other end? Is it special RDMA switch or RDMA adapter before switch or what? Why is this cluster talk? What if I want a single server with Windows (I can install HPC Windows or Windows 2008 R2)?

  Read the article

• Multicast doesn't seem to be working on RHEL 5.5

  - by NullUser

  I'm trying to install Oracle Grid Infrastructure on two machines. Their documentation states You must enable multicasting for the cluster on the IP address subnet ranges 224.0.0.0/24 and 230.0.1.0/24 So I ran: route add -net 224.0.0.0/24 dev eth2 route add -net 230.0.1.0/24 dev eth2 route -n produces: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 230.0.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 224.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 # and others An ifconfig eth2 shows, among other things, UP BROADCAST RUNNING MULTICAST. However, when I run their multicast test utility, it fails me: Test for Multicast address 230.0.1.0 Sep 3 19:40:39 | Multicast Failed for eth2 using address 230.0.1.0:42000 Test for Multicast address 224.0.0.251 Sep 3 19:41:10 | Multicast Failed for eth2 using address 224.0.0.251:42001 What am I doing wrong?

  Read the article

• Other user SSHed from my hardware

  - by Alex

  While logged into our HPC cluster I used w to check out who else was logged in. I happened to notice that it looks like there's another user logged in from my (personal) computer; 19:04:47 up 40 days, 6:39, 44 users, load average: 0.10, 0.14, 0.18 USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT ME pts/4 zerg.neuron12. 18:55 0.00s 0.09s 0.04s w SOMEONE_ELSE pts/35 zerg.neuron12. Sat14 2:27m 0.08s 0.08s -bash Is this something I should be worried out - I tried to kill the other session but had a permission denied message. Is it possible we just both have the same hardware name? I'd have thought that if this were the case the server would give one of us a different name (e.g. zerg1) when we logged in to prevent confusion. This is not an area I have any experience with, so any advice would be greatly appreciated!

  Read the article

• How to control admission policy in vmware HA?

  - by John

  Simple question, I have 3 hosts running 4.1 Essentials Plus with vmware HA. I tried to create several virtual machines that filled 90% of each server's memory capacity. I know that vmware has really sophisticated memory management within virtual machines, but I do not understand how the vCenter can allow me even to power on the virtual machines that exceed the critical memory level, when the host failover can be still handled. Is it due to the fact that virtual machines does not use the memory, so that it is still considered as free, so virtual machines can be powered on ? But what would happen if all VMs would be really using the RAM before the host failure - they could not be migrated to other hosts after the failure. The default behaviour in XenServer is that, it automatically calculates the maximum memory level that can be used within the cluster so that the host failure is still protected. Vmware does the same thing ? The admission policy is enabled. Vmware HA enabled.

  Read the article

• OSX: Selecting default application for all unknown and different file types (extensions)

  - by Leo

  I work in cluster computing and am using Mac OS X 10.6. I send off hundreds of computing jobs a day, and each one comes back with with a different extension. For example, svmGeneSelect.o12345 which is the std output of my svmGeneSelect job which is job number 12345. I don't control the extensions. All files are plain text. I want OSX to open any file extension that it hasn't seen before with my favorite text editor when I click on it. Or even better set up file association defaults for extension patterns ie textEdit for extensions matching *.o*. I do NOT want to create file associations for individual files since this extension will only ever exist once, and I do not want to go through the process of selecting the application to use for each file. Thanks for any help you can offer.

  Read the article

• VMWare Guest NIC Teaming

  - by Justin Popa

  We're looking to add additional bandwidth to a VM running on an ESXi cluster running 5.1. How can I team these within the VM? I suspect I need to add a second e1000 and then install some Intel software to team them. Any idea which version of Intel driver? Is there some better software to use? EDIT: Sorry, neglected some information. The guest OS is Win2k8R2. The physical NICs on the host are 1Gbps. The reason this has come up is we are seeing the VM hitting near cap on the capability of a single 1Gbps link (Usually at 100-110MBps, bursting to 130s, but I think that may just be a UI math lie) and we're interested in seeing if adding an additional NIC in a teamed setting will increase the overall throughput.

  Read the article

• Enabling Session Directory under Terminal Server Configuration Tool and Server Settings

  - by LPE

  Yello, I'm trying to add up a Terminal Server Session Directory client to an already fully functional Session Directory cluster which today runs two clients as well as the server. I've been reading up on both Google, Microsoft KB's as well as old documentation from an earlier employee but to no avail. The step I'm stuck at is when I open up Terminal Server Configuration Tool (tscc.msc), chooses ServerSettings. I know there should be an option saying "Session Directory" on the right hand side along with Active Desktop, Licensing and whatnot, but it's not there. I've logged on to both the other already functional clients and checked the same list and there the Session Directory option sure is both visible as well as working good with the specified information. This picture is the same view that I'm looking at at the moment, but mine is missing the bottom option that says "Session Directory" http://www.inetnj.com/doc/images/TerminalServerConfiguration.jpg Any help would be greatly appriciated. Regards LPE

  Read the article

• VMWare - persistent "Host memory status" alarm in vSphere

  - by ewwhite

  I have a particular VMWare ESX 4.1 host that has a very persistent "Host memory status" alarm. This is running on an HP ProLiant DL360 G7 server. The HP ILO and System Management agents don't know any errors. If I clear the alarm in the vSphere client, it returns within a day. I've tried reseating DIMMs, however, the error does not indicate a problem with a specific module. There's another host in the cluster with an identical configuration. It's not exhibiting any issues. Any thoughts? This is touched on briefly on other forums (and here) with no clear resolution.

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >