Search Results

Search found 1427 results on 58 pages for 'zoom pat'.

Page 47/58 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• got VPN l2l connect between a site & HQ but not traffice using ASA5505 on both ends

  - by vinlata

  Hi, Could anyone see what did I do wrong here? this is one configuration of site1 to HQ on ASA5505, I can get connected but seems like no traffic going (allowed) between them, could it be a NAT issue? any helps would much be appreciated Thanks interface Vlan1 nameif inside security-level 100 ip address 172.30.205.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address pppoe setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 shutdown ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! passwd .dIuXDIYzD6RSHz7 encrypted ftp mode passive dns server-group DefaultDNS domain-name errg.net object-group network HQ network-object 172.22.0.0 255.255.0.0 network-object 172.22.0.0 255.255.128.0 network-object 172.22.0.0 255.255.255.128 network-object 172.22.1.0 255.255.255.128 network-object 172.22.1.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list outside_access_in extended permit icmp any any echo-reply access-list outside_20_cryptomap extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list inside_nat0_outbound extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list policy-nat extended permit ip 172.30.205.0 255.255.255.0 172.22.0.0 255.255.0.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) 172.30.205.0 access-list policy-nat access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute username errgadmin password Os98gTdF8BZ0X2Px encrypted privilege 15 http server enable http 64.42.2.224 255.255.255.240 outside http 172.22.0.0 255.255.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 190 match address outside_20_cryptomap crypto map outside_map 190 set pfs crypto map outside_map 190 set peer 66.7.249.109 crypto map outside_map 190 set transform-set ESP-3DES-SHA crypto map outside_map 190 set phase1-mode aggressive crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 30 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp nat-traversal 190 crypto isakmp ipsec-over-tcp port 10000 tunnel-group 66.7.249.109 type ipsec-l2l tunnel-group 66.7.249.109 ipsec-attributes pre-shared-key * telnet timeout 5 ssh 172.30.205.0 255.255.255.0 inside ssh 172.22.0.0 255.255.0.0 outside ssh 64.42.2.224 255.255.255.240 outside ssh 172.25.0.0 255.255.128.0 outside ssh timeout 5 console timeout 0 management-access inside vpdn group PPPoEx request dialout pppoe vpdn group PPPoEx localname [email protected] vpdn group PPPoEx ppp authentication pap vpdn username [email protected] password ********* dhcpd address 172.30.205.100-172.30.205.131 inside dhcpd dns 172.22.0.133 68.94.156.1 interface inside dhcpd wins 172.22.0.133 interface inside dhcpd domain errg.net interface inside dhcpd enable inside ! ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! end

  Read the article

• Direct3D - Zooming into Mouse Position

  - by roohan

  I'm trying to implement my camera class for a simulation. But I cant figure out how to zoom into my world based on the mouse position. I mean the object under the mouse cursor should remain at the same screen position. My zooming looks like this: VOID ZoomIn(D3DXMATRIX& WorldMatrix, FLOAT const& MouseX, FLOAT const& MouseY) { this->Position.z = this->Position.z * 0.9f; D3DXMatrixLookAtLH(&this->ViewMatrix, &this->Position, &this->Target, &this->UpDirection); } I passed the world matrix to the function because I had the idea to move my drawing origin according to the mouse position. But I cant find out how to calculate the offset in to move my drawing origin. Anyone got an idea how to calculate this? Thanks in advance. SOLVED Ok I solved my problem. Here is the code if anyone is interested: VOID CAMERA2D::ZoomIn(FLOAT const& MouseX, FLOAT const& MouseY) { // Get the setting of the current view port. D3DVIEWPORT9 ViewPort; this->Direct3DDevice->GetViewport(&ViewPort); // Convert the screen coordinates of the mouse to world space coordinates. D3DXVECTOR3 VectorOne; D3DXVECTOR3 VectorTwo; D3DXVec3Unproject(&VectorOne, &D3DXVECTOR3(MouseX, MouseY, 0.0f), &ViewPort, &this->ProjectionMatrix, &this->ViewMatrix, &WorldMatrix); D3DXVec3Unproject(&VectorTwo, &D3DXVECTOR3(MouseX, MouseY, 1.0f), &ViewPort, &this->ProjectionMatrix, &this->ViewMatrix, &WorldMatrix); // Calculate the resulting vector components. float WorldZ = 0.0f; float WorldX = ((WorldZ - VectorOne.z) * (VectorTwo.x - VectorOne.x)) / (VectorTwo.z - VectorOne.z) + VectorOne.x; float WorldY = ((WorldZ - VectorOne.z) * (VectorTwo.y - VectorOne.y)) / (VectorTwo.z - VectorOne.z) + VectorOne.y; // Move the camera into the screen. this->Position.z = this->Position.z * 0.9f; D3DXMatrixLookAtLH(&this->ViewMatrix, &this->Position, &this->Target, &this->UpDirection); // Calculate the world space vector again based on the new view matrix, D3DXVec3Unproject(&VectorOne, &D3DXVECTOR3(MouseX, MouseY, 0.0f), &ViewPort, &this->ProjectionMatrix, &this->ViewMatrix, &WorldMatrix); D3DXVec3Unproject(&VectorTwo, &D3DXVECTOR3(MouseX, MouseY, 1.0f), &ViewPort, &this->ProjectionMatrix, &this->ViewMatrix, &WorldMatrix); // Calculate the resulting vector components. float WorldZ2 = 0.0f; float WorldX2 = ((WorldZ2 - VectorOne.z) * (VectorTwo.x - VectorOne.x)) / (VectorTwo.z - VectorOne.z) + VectorOne.x; float WorldY2 = ((WorldZ2 - VectorOne.z) * (VectorTwo.y - VectorOne.y)) / (VectorTwo.z - VectorOne.z) + VectorOne.y; // Create a temporary translation matrix for calculating the origin offset. D3DXMATRIX TranslationMatrix; D3DXMatrixIdentity(&TranslationMatrix); // Calculate the origin offset. D3DXMatrixTranslation(&TranslationMatrix, WorldX2 - WorldX, WorldY2 - WorldY, 0.0f); // At the offset to the cameras world matrix. this->WorldMatrix = this->WorldMatrix * TranslationMatrix; } Maybe someone has even a better solution than mine.

  Read the article

• php script google maps points from mysql (google example)

  - by user1637477

  I have recently added style information to my maps script, and it stopped working. Have I done something wrong? Guess you can tell I'm very new to this. Any help appreciated. <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"><head> <meta http-equiv="content-type" content="text/html; charset=utf-8"><title>Google Maps AJAX + mySQL/PHP Example</title> <script src="http://maps.google.com/maps/api/js?sensor=false" type="text/javascript"></script> <script type="text/javascript"> //<![CDATA[ ( *******************I INSERTED HERE ) var styles = [ { stylers: [ { hue: "#00ffe6" }, { saturation: -20 } ] },{ featureType: "road", elementType: "geometry", stylers: [ { lightness: 100 }, { visibility: "simplified" } ] },{ featureType: "road", elementType: "labels", stylers: [ { visibility: "off" } ] } ];**( ******************************** THROUGH TO HERE ) map.setOptions({styles: styles}); var customIcons = { restaurant: { icon: 'http://labs.google.com/ridefinder/images/mm_20_blue.png', shadow: 'http://labs.google.com/ridefinder/images/mm_20_shadow.png' }, bar: { icon: 'http://labs.google.com/ridefinder/images/mm_20_red.png', shadow: 'http://labs.google.com/ridefinder/images/mm_20_shadow.png' } }; function load() { var map = new google.maps.Map(document.getElementById("map"), { center: new google.maps.LatLng(-37.7735, 175.1418), zoom: 10, mapTypeId: 'roadmap' }); var infoWindow = new google.maps.InfoWindow; // Change this depending on the name of your PHP fileBHBHBHBHBHBHBHBBBBBBBBBBBBBBBBBBBBBBBBBBB downloadUrl("mywebsite-no i did this just a minute ago", function(data) { var xml = data.responseXML; var markers = xml.documentElement.getElementsByTagName("marker"); for (var i = 0; i < markers.length; i++) { var name = markers[i].getAttribute("name"); var address = markers[i].getAttribute("address"); var type = markers[i].getAttribute("type"); var point = new google.maps.LatLng( parseFloat(markers[i].getAttribute("lat")), parseFloat(markers[i].getAttribute("lng"))); var html = "<b>" + name + "</b> <br/>" + address; var icon = customIcons[type] || {}; var marker = new google.maps.Marker({ map: map, position: point, icon: icon.icon, shadow: icon.shadow }); bindInfoWindow(marker, map, infoWindow, html); } }); } function bindInfoWindow(marker, map, infoWindow, html) { google.maps.event.addListener(marker, 'click', function() { infoWindow.setContent(html); infoWindow.open(map, marker); }); } function downloadUrl(url, callback) { var request = window.ActiveXObject ? new ActiveXObject('Microsoft.XMLHTTP') : new XMLHttpRequest; request.onreadystatechange = function() { if (request.readyState == 4) { request.onreadystatechange = doNothing; callback(request, request.status); } }; request.open('GET', url, true); request.send(null); } function doNothing() {} //]]> </script><!--Adobe Edge Runtime--> <script type="text/javascript" charset="utf-8" src="map500x1000_edgePreload.js"></script> <style> .edgeLoad-EDGE-12956064 { visibility:hidden; } </style> <!--Adobe Edge Runtime End--> </head> <body onload="load()"> <div id="map" style="width: 1000px; height: 1000px;" class="edgeLoad-EDGE-12956064"></div> </body></html>

  Read the article

• Jquery mobile and Google maps [on hold]

  - by Jack

  I have been trying to get my google maps to display within a page of a mobile app. The map will display for a second, and then disappear. I have read about a jquery bug, but i can't seem to find a way to get this code to work. any help would be greatly appreciated. <script> var geocoder; var currentLocation; var searchResults; var map; var directionsDisplay; var directionsService; function init(){ geocoder = new google.maps.Geocoder(); if (navigator.geolocation){ navigator.geolocation.watchPosition(showLocation, locationError); } else { alert("Geolocation not supported on this device"); return; } }//init function function showLocation(location){//start showlocation currentLocation = new google.maps.LatLng(location.coords.latitude, location.coords.longitude); $('#lat').attr("value", currentLocation.lat()); $('#lng').attr("value", currentLocation.lng()); geocoder = new google.maps.Geocoder(); geocoder.geocode({'latLng': currentLocation}, function(results, status){ if (status == google.maps.GeocoderStatus.OK){ if (results[0]){ var address = results[0].formatted_address; $('#loc').html(results[0].formatted_address); var info = "Latitude: " + location.coords.latitude + " Longitude: " + location.coords.longitude + "<br />"; info += "Location accurate within " + location.coords.accuracy + " meters <br /> Last Update: " + new Date(location.timestamp).toLocaleString(); $('#acc').html(info); $('#address').attr("value", results[0].formatted_address); }else{ alert('No results found'); }//end else //if(!map) initMap(); }else { $('#loc').html('Geocoder failed due to: ' + status); }//end else });//end of function if (!map) initMap(); }//end showlocation function function locationError(error){ switch(error.code) { case error.PERMISSION_DENIED: alert("Geolocation access denied or disabled. To enable geolocation on your iPhone, go to Settings > General> Location Services"); break; case error.POSITION_UNAVAILABLE: alert("Current location not available"); break; case error.TIMEOUT: alert("Timeout"); break; default: alert("unkown error"); break; }//endswitch }//endlocationerror function initMap(){ var mapOptions = { zoom: 14, mapTypeId: google.maps.MapTypeId.ROADMAP, center: currentLocation };//var mapOptions map = new google.maps.Map(document.getElementById('mapDiv'), mapOptions); google.maps.event.trigger(map, 'resize'); var bounds = new google.maps.LatLngBounds(); bounds.extend(currentLocation); map.fitBounds(bounds); //new code //var center; //function calculateCenter(){ //center = map.getCenter(); //} //google.maps.even.addDomListener(map, 'idle', function(){ //calculateCenter(); //}); //google.maps.even.addListenerOnce(map, 'idle', function(){ //google.maps.even.trigger(map,'resize'); //}); //google.maps.event.addDomListener(window, 'resize', function() { //map.setCenter(center); //});//end new code }//end initMap() //------------------------------------------------------------------------------- $(document).on("pageinit", init);

  Read the article

• GMLib Could not complete the operation due to error 80020101

  - by Pierrie

  I get this error "Could not complete the operation due to error 80020101." at random times when displaying a map with a marker on it. I use Delphi 2007 and GMLib [1.2.0 Final]. I have read up on the issue and some suggestions was that the problem is due to commenting or bad syntax in java code, and it was suggested that i take out all the commenting and check for errors in the java code. This i did, i recompiled and reinstalled GMLib after modifying the map.html file. I stripped it of all commenting and parsed it through ie for faults but found none, as expected. But the problem still occurs. Here is a sample of my code to show the map and add the marker : Var newmarker : TMarker; begin newmarker := GMMarker1.Add(); newmarker.Position.Lat := MarkersToPaint[i].Latitude; newmarker.Position.Lng := MarkersToPaint[i].Longitude; newmarker.Visible := True; newmarker.Title := MarkersToPaint[i].Title; GMMap1.RequiredProp.Center.Lat := midlat; GMMap1.RequiredProp.Center.Lng := midlong; GMMap1.RequiredProp.Zoom := 18; GMMarker1.ShowElements; GMMap1.Active := True; Any help in this matter will be greatly appreciated.

  Read the article

• DirectionsDistance in google maps API v3

  - by Yawn

  Hey, I'm trying to work out how to use this to get the distance from the successful directions: http://code.google.com/apis/maps/documentation/v3/reference.html#DirectionsDistance This is the code I have so far: var googleMaps = { // HTML Nodes fromInput: google_maps_from, toInput: google_maps_to, // API Objects dirService: new google.maps.DirectionsService(), dirRenderer: new google.maps.DirectionsRenderer(), map: null, showDirections: function(dirResult, dirStatus) { if (dirStatus != google.maps.DirectionsStatus.OK) { //Here we'll handle the errors a bit better :P alert('Directions failed: ' + dirStatus); return; } else { //Get the distance here //onGDirectionsLoad(); } // Show directions googleMaps.dirRenderer.setMap(googleMaps.map); googleMaps.dirRenderer.setPanel(document.getElementById("directions")); googleMaps.dirRenderer.setDirections(dirResult); }, getSelectedTravelMode: function() { return google.maps.DirectionsTravelMode.DRIVING; }, getSelectedUnitSystem: function() { return google.maps.DirectionsUnitSystem.METRIC; }, getDirections: function() { var fromStr = googleMaps.fromInput; var toStr = googleMaps.toInput; var dirRequest = { origin: fromStr, destination: toStr, travelMode: googleMaps.getSelectedTravelMode(), unitSystem: googleMaps.getSelectedUnitSystem(), provideTripAlternatives: true }; googleMaps.dirService.route(dirRequest, googleMaps.showDirections); }, init: function() { googleMaps.map = new google.maps.Map(document.getElementById("map_canvas"), { zoom: 13, mapTypeId: google.maps.MapTypeId.ROADMAP }); // Show directions onload googleMaps.getDirections(); } }; // Onload handler to fire off the app. google.maps.event.addDomListener(window, 'load', googleMaps.init); I could do this just fine in v2, just having trouble working out the v3 equivalent :x

  Read the article

• Android Canvas Coordinate System

  - by Mitch

  I'm trying to find information on how to change the coordinate system for the canvas. I have some vector data I'd like to draw to a canvas using things like circles and lines, but the data's coordinate system doesn't match the canvas coordinate system. Is there a way to map the units I'm using to the screen's units? I'm drawing to an ImageView which isn't taking up the entire display. If I have to do my own calculations prior to each drawing call, how to I find the width and height of my ImageView? The getWidth() and getHeight() calls I tried seem to be returning the entire canvas size and not the size of the ImageView which isn't helpful. I see some matrix stuff, is that something that will work for me? I tried to use the "public void scale(float sx, float sy)", but that works more like a pixel level zoom rather than a vector scale function by expanding each pixel. This means if the dimensions are increased to fit the screen, the line thickness is also increased. Update: After some research I'm starting to think there's no way to change coordinate systems to something else. I'll need to map all my coordinates to the screen's pixel coordinates and do so by modifying each vector. The getWidth() and getHeight() seem to be working better for me now. I can say what was wrong, but I suspect I can't use these methods inside the constructor.

  Read the article

• Marking Current Location on Map, Android

  - by deewangan

  Hi every one, i followed some tutorials to create an application that shows the current position of the user on the map with a marking. but for some reasons i can't get to work the marking part? the other parts works well, but whenever i add the marking code the application crashes. i hope someone could help me.here is the code: public class LocationActivity extends MapActivity { /** Called when the activity is first created. */ private MapView mapView; private LocationManager lm; private LocationListener ll; private MapController mc; GeoPoint p = null; Drawable defaultMarker = null; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); mapView = (MapView)findViewById(R.id.mapView); //show zoom in/out buttons mapView.setBuiltInZoomControls(true); //Standard view of the map(map/sat) mapView.setSatellite(false); //get controller of the map for zooming in/out mc = mapView.getController(); // Zoom Level mc.setZoom(18); MyLocationOverlay myLocationOverlay = new MyLocationOverlay(); List<Overlay> list = mapView.getOverlays(); list.add(myLocationOverlay); lm = (LocationManager)getSystemService(Context.LOCATION_SERVICE); ll = new MyLocationListener(); lm.requestLocationUpdates( LocationManager.GPS_PROVIDER, 0, 0, ll); //Get the current location in start-up GeoPoint initGeoPoint = new GeoPoint( (int)(lm.getLastKnownLocation( LocationManager.GPS_PROVIDER) .getLatitude()*1000000), (int)(lm.getLastKnownLocation( LocationManager.GPS_PROVIDER) .getLongitude()*1000000)); mc.animateTo(initGeoPoint); } protected class MyLocationOverlay extends com.google.android.maps.Overlay { @Override public boolean draw(Canvas canvas, MapView mapView, boolean shadow, long when) { Paint paint = new Paint(); super.draw(canvas, mapView, shadow); // Converts lat/lng-Point to OUR coordinates on the screen. Point myScreenCoords = new Point(); mapView.getProjection().toPixels(p, myScreenCoords); paint.setStrokeWidth(1); paint.setARGB(255, 255, 255, 255); paint.setStyle(Paint.Style.STROKE); Bitmap bmp = BitmapFactory.decodeResource(getResources(), R.drawable.push); canvas.drawBitmap(bmp, myScreenCoords.x, myScreenCoords.y, paint); canvas.drawText("I am here...", myScreenCoords.x, myScreenCoords.y, paint); return true; } } private class MyLocationListener implements LocationListener{ public void onLocationChanged(Location argLocation) { // TODO Auto-generated method stub GeoPoint myGeoPoint = new GeoPoint( (int)(argLocation.getLatitude()*1000000), (int)(argLocation.getLongitude()*1000000)); /* * it will show a message on * location change Toast.makeText(getBaseContext(), "New location latitude [" +argLocation.getLatitude() + "] longitude [" + argLocation.getLongitude()+"]", Toast.LENGTH_SHORT).show(); */ mc.animateTo(myGeoPoint); } public void onProviderDisabled(String provider) { // TODO Auto-generated method stub } public void onProviderEnabled(String provider) { // TODO Auto-generated method stub } public void onStatusChanged(String provider, int status, Bundle extras) { // TODO Auto-generated method stub } } protected boolean isRouteDisplayed() { return false; } } here is the logcat: 01-19 05:31:43.011: DEBUG/AndroidRuntime(759): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<< 01-19 05:31:43.011: DEBUG/AndroidRuntime(759): CheckJNI is ON 01-19 05:31:43.411: DEBUG/AndroidRuntime(759): --- registering native functions --- 01-19 05:31:43.431: INFO/jdwp(759): received file descriptor 19 from ADB 01-19 05:31:43.431: INFO/jdwp(759): Ignoring second debugger -- accepting and dropping 01-19 05:31:44.531: INFO/ActivityManager(583): Starting activity: Intent { flg=0x10000000 cmp=pro.googlemapp/.LocationActivity } 01-19 05:31:44.641: DEBUG/AndroidRuntime(759): Shutting down VM 01-19 05:31:44.641: DEBUG/dalvikvm(759): DestroyJavaVM waiting for non-daemon threads to exit 01-19 05:31:44.641: DEBUG/dalvikvm(759): DestroyJavaVM shutting VM down 01-19 05:31:44.641: DEBUG/dalvikvm(759): HeapWorker thread shutting down 01-19 05:31:44.651: DEBUG/dalvikvm(759): HeapWorker thread has shut down 01-19 05:31:44.651: DEBUG/jdwp(759): JDWP shutting down net... 01-19 05:31:44.651: DEBUG/jdwp(759): +++ peer disconnected 01-19 05:31:44.651: INFO/dalvikvm(759): Debugger has detached; object registry had 1 entries 01-19 05:31:44.661: DEBUG/dalvikvm(759): VM cleaning up 01-19 05:31:44.681: INFO/ActivityManager(583): Start proc pro.googlemapp for activity pro.googlemapp/.LocationActivity: pid=770 uid=10025 gids={3003} 01-19 05:31:44.761: DEBUG/dalvikvm(759): LinearAlloc 0x0 used 676436 of 4194304 (16%) 01-19 05:31:44.801: INFO/jdwp(770): received file descriptor 20 from ADB 01-19 05:31:44.822: INFO/dalvikvm(770): ignoring registerObject request in thread=3 01-19 05:31:44.851: INFO/jdwp(770): Ignoring second debugger -- accepting and dropping 01-19 05:31:44.851: ERROR/jdwp(770): Failed writing handshake bytes: Broken pipe (-1 of 14) 01-19 05:31:44.851: INFO/dalvikvm(770): Debugger has detached; object registry had 0 entries 01-19 05:31:45.320: ERROR/ActivityThread(770): Failed to find provider info for com.google.settings 01-19 05:31:45.320: ERROR/ActivityThread(770): Failed to find provider info for com.google.settings 01-19 05:31:45.340: ERROR/ActivityThread(770): Failed to find provider info for com.google.settings 01-19 05:31:45.781: DEBUG/LocationManager(770): Constructor: service = android.location.ILocationManager$Stub$Proxy@4379d9f0 01-19 05:31:45.791: WARN/GpsLocationProvider(583): Duplicate add listener for uid 10025 01-19 05:31:45.791: DEBUG/GpsLocationProvider(583): setMinTime 0 01-19 05:31:45.791: DEBUG/GpsLocationProvider(583): startNavigating 01-19 05:31:45.831: INFO/jdwp(770): received file descriptor 27 from ADB 01-19 05:31:46.001: INFO/MapActivity(770): Handling network change notification:CONNECTED 01-19 05:31:46.001: ERROR/MapActivity(770): Couldn't get connection factory client 01-19 05:31:46.451: DEBUG/dalvikvm(770): GC freed 4539 objects / 298952 bytes in 118ms 01-19 05:31:46.470: DEBUG/AndroidRuntime(770): Shutting down VM 01-19 05:31:46.470: WARN/dalvikvm(770): threadid=3: thread exiting with uncaught exception (group=0x4001aa28) 01-19 05:31:46.481: ERROR/AndroidRuntime(770): Uncaught handler: thread main exiting due to uncaught exception 01-19 05:31:46.541: ERROR/AndroidRuntime(770): java.lang.NullPointerException 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at com.google.android.maps.PixelConverter.toPixels(PixelConverter.java:58) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at com.google.android.maps.PixelConverter.toPixels(PixelConverter.java:48) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at pro.googlemapp.LocationActivity$MyLocationOverlay.draw(LocationActivity.java:101) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at com.google.android.maps.OverlayBundle.draw(OverlayBundle.java:42) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at com.google.android.maps.MapView.onDraw(MapView.java:476) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.view.View.draw(View.java:6274) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.view.ViewGroup.drawChild(ViewGroup.java:1526) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1256) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.view.ViewGroup.drawChild(ViewGroup.java:1524) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1256) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.view.View.draw(View.java:6277) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.widget.FrameLayout.draw(FrameLayout.java:352) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.view.ViewGroup.drawChild(ViewGroup.java:1526) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1256) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.view.ViewGroup.drawChild(ViewGroup.java:1524) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1256) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.view.View.draw(View.java:6277) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.widget.FrameLayout.draw(FrameLayout.java:352) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at com.android.internal.policy.impl.PhoneWindow$DecorView.draw(PhoneWindow.java:1883) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.view.ViewRoot.draw(ViewRoot.java:1332) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.view.ViewRoot.performTraversals(ViewRoot.java:1097) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.view.ViewRoot.handleMessage(ViewRoot.java:1613) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.os.Handler.dispatchMessage(Handler.java:99) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.os.Looper.loop(Looper.java:123) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at android.app.ActivityThread.main(ActivityThread.java:4203) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at java.lang.reflect.Method.invokeNative(Native Method) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at java.lang.reflect.Method.invoke(Method.java:521) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:791) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:549) 01-19 05:31:46.541: ERROR/AndroidRuntime(770): at dalvik.system.NativeStart.main(Native Method) 01-19 05:31:46.551: INFO/Process(583): Sending signal. PID: 770 SIG: 3 01-19 05:31:46.581: INFO/dalvikvm(770): threadid=7: reacting to signal 3 01-19 05:31:46.661: INFO/dalvikvm(770): Wrote stack trace to '/data/anr/traces.txt' 01-19 05:31:46.871: INFO/ARMAssembler(583): generated scanline__00000077:03515104_00000000_00000000 [ 27 ipp] (41 ins) at [0x2c69c8:0x2c6a6c] in 973448 ns 01-19 05:31:46.911: INFO/ARMAssembler(583): generated scanline__00000077:03515104_00001001_00000000 [ 64 ipp] (84 ins) at [0x2c6a70:0x2c6bc0] in 1985378 ns 01-19 05:31:49.881: INFO/Process(770): Sending signal. PID: 770 SIG: 9 01-19 05:31:49.931: INFO/ActivityManager(583): Process pro.googlemapp (pid 770) has died. 01-19 05:31:49.941: WARN/GpsLocationProvider(583): Unneeded remove listener for uid 1000 01-19 05:31:49.941: DEBUG/GpsLocationProvider(583): stopNavigating 01-19 05:31:49.951: INFO/WindowManager(583): WIN DEATH: Window{438891c0 pro.googlemapp/pro.googlemapp.LocationActivity paused=false} 01-19 05:31:50.111: WARN/UsageStats(583): Unexpected resume of com.android.launcher while already resumed in pro.googlemapp 01-19 05:31:50.200: WARN/InputManagerService(583): Got RemoteException sending setActive(false) notification to pid 770 uid 10025

  Read the article

• Designer issue in VS: Events cannot be set on the object passed to the event binding service ...

  - by serhio

  I have a little problem: the Winform control (that contains between others WPF) suddenly stopped to be displayed in Designer. Message: Events cannot be set on the object passed to the event binding service because a site associated with the object could not be located. Call Stack: at System.ComponentModel.Design.EventBindingService.EventPropertyDescriptor.SetValue(Object component, Object value) at System.ComponentModel.Design.Serialization.CodeDomSerializerBase.DeserializeAttachEventStatement(IDesignerSerializationManager manager, CodeAttachEventStatement statement) at System.ComponentModel.Design.Serialization.CodeDomSerializerBase.DeserializeStatement(IDesignerSerializationManager manager, CodeStatement statement) Where could be the problem? InitializeComponent code Private Sub InitializeComponent() Dim resources As System.ComponentModel.ComponentResourceManager = New System.ComponentModel.ComponentResourceManager(GetType(PlanDeLigne)) Dim Appearance1 As Infragistics.Win.Appearance = New Infragistics.Win.Appearance() Dim Appearance2 As Infragistics.Win.Appearance = New Infragistics.Win.Appearance() Dim Appearance3 As Infragistics.Win.Appearance = New Infragistics.Win.Appearance() Dim Appearance4 As Infragistics.Win.Appearance = New Infragistics.Win.Appearance() Dim Appearance5 As Infragistics.Win.Appearance = New Infragistics.Win.Appearance() Dim Appearance6 As Infragistics.Win.Appearance = New Infragistics.Win.Appearance() Dim Appearance7 As Infragistics.Win.Appearance = New Infragistics.Win.Appearance() Dim Appearance8 As Infragistics.Win.Appearance = New Infragistics.Win.Appearance() Dim Appearance9 As Infragistics.Win.Appearance = New Infragistics.Win.Appearance() Dim Appearance10 As Infragistics.Win.Appearance = New Infragistics.Win.Appearance() Dim Appearance11 As Infragistics.Win.Appearance = New Infragistics.Win.Appearance() Dim Appearance12 As Infragistics.Win.Appearance = New Infragistics.Win.Appearance() Me.mnbMenu = New System.Windows.Forms.ToolStrip() Me.mncMode = New System.Windows.Forms.ToolStripComboBox() Me.mnbSeparator1 = New System.Windows.Forms.ToolStripSeparator() Me.mnbAdd = New System.Windows.Forms.ToolStripButton() Me.mnbDelete = New System.Windows.Forms.ToolStripButton() Me.mnbSeparator2 = New System.Windows.Forms.ToolStripSeparator() Me.mnbDropDownAction = New System.Windows.Forms.ToolStripDropDownButton() Me.mnbDropDownActionSens = New System.Windows.Forms.ToolStripMenuItem() Me.mnbDropDownActionSeparator1 = New System.Windows.Forms.ToolStripSeparator() Me.mnbDropDownActionDistances = New System.Windows.Forms.ToolStripMenuItem() Me.mnbDropDownActionSeparator2 = New System.Windows.Forms.ToolStripSeparator() Me.mnbDropDownActionArretsPhysiques = New System.Windows.Forms.ToolStripMenuItem() Me.mnbSeparator3 = New System.Windows.Forms.ToolStripSeparator() Me.mnbSelectionZoom = New System.Windows.Forms.ToolStripButton() Me.mnbCancelZoom = New System.Windows.Forms.ToolStripButton() Me.mnbSeparator4 = New System.Windows.Forms.ToolStripSeparator() Me.mnbParametrage = New System.Windows.Forms.ToolStripButton() Me.mncSPlacerArret = New System.Windows.Forms.ToolStripMenuItem() Me.mncSSeparator1 = New System.Windows.Forms.ToolStripSeparator() Me.mncSImage = New System.Windows.Forms.ToolStripMenuItem() Me.mncSDefinirLastArret = New System.Windows.Forms.ToolStripMenuItem() Me.mncSSeparator2 = New System.Windows.Forms.ToolStripSeparator() Me.mncSSupprimerArrets = New System.Windows.Forms.ToolStripMenuItem() Me.mncSInsererArret = New System.Windows.Forms.ToolStripMenuItem() Me.mncSSeparator3 = New System.Windows.Forms.ToolStripSeparator() Me.mncSInformations = New System.Windows.Forms.ToolStripMenuItem() Me.mncSSupprimerSegment = New System.Windows.Forms.ToolStripMenuItem() Me.mncSSeparator4 = New System.Windows.Forms.ToolStripSeparator() Me.mncSBatirTroncon = New System.Windows.Forms.ToolStripMenuItem() Me.mncTInformations = New System.Windows.Forms.ToolStripMenuItem() Me.mncTDistances = New System.Windows.Forms.ToolStripMenuItem() Me.mncTSeparator1 = New System.Windows.Forms.ToolStripSeparator() Me.mncTTempsDeParcours = New System.Windows.Forms.ToolStripMenuItem() Me.mncTSeparator2 = New System.Windows.Forms.ToolStripSeparator() Me.mncTCreerSensInverse = New System.Windows.Forms.ToolStripMenuItem() Me.mncTSeparator3 = New System.Windows.Forms.ToolStripSeparator() Me.mncTSupprimerTroncon = New System.Windows.Forms.ToolStripMenuItem() Me.mncTBatirItineraire = New System.Windows.Forms.ToolStripMenuItem() Me.mncIInformations = New System.Windows.Forms.ToolStripMenuItem() Me.mncISeparator1 = New System.Windows.Forms.ToolStripSeparator() Me.mncISupprimerItineraire = New System.Windows.Forms.ToolStripMenuItem() Me.SplitContainer = New System.Windows.Forms.SplitContainer() Me.ElementHost1 = New System.Windows.Forms.Integration.ElementHost() Me._StopsCanvas = New Keolis.ctlWpfPlanDeLigne.StopsCanvas() Me.lblTitreCreation = New Keolis.ctlComponents.Label() Me.Panel1 = New System.Windows.Forms.Panel() Me.btnOk = New Keolis.ctlComponents.Button() Me.btnAnnuler = New Keolis.ctlComponents.Button() Me.grdCreation = New Keolis.ctlWinGrid.WinGrid() Me.mnbMenu.SuspendLayout() CType(Me.SplitContainer, System.ComponentModel.ISupportInitialize).BeginInit() Me.SplitContainer.Panel1.SuspendLayout() Me.SplitContainer.Panel2.SuspendLayout() Me.SplitContainer.SuspendLayout() Me.Panel1.SuspendLayout() CType(Me.grdCreation, System.ComponentModel.ISupportInitialize).BeginInit() Me.SuspendLayout() ' 'mnbMenu ' Me.mnbMenu.GripStyle = System.Windows.Forms.ToolStripGripStyle.Hidden Me.mnbMenu.Items.AddRange(New System.Windows.Forms.ToolStripItem() {Me.mncMode, Me.mnbSeparator1, Me.mnbAdd, Me.mnbDelete, Me.mnbSeparator2, Me.mnbDropDownAction, Me.mnbSeparator3, Me.mnbSelectionZoom, Me.mnbCancelZoom, Me.mnbSeparator4, Me.mnbParametrage}) Me.mnbMenu.Location = New System.Drawing.Point(0, 0) Me.mnbMenu.Name = "mnbMenu" Me.mnbMenu.Size = New System.Drawing.Size(605, 25) Me.mnbMenu.TabIndex = 2 ' 'mncMode ' Me.mncMode.DropDownStyle = System.Windows.Forms.ComboBoxStyle.DropDownList Me.mncMode.Name = "mncMode" Me.mncMode.Size = New System.Drawing.Size(121, 25) Me.mncMode.ToolTipText = "Mode du plan de ligne" ' 'mnbSeparator1 ' Me.mnbSeparator1.AutoSize = False Me.mnbSeparator1.Name = "mnbSeparator1" Me.mnbSeparator1.Size = New System.Drawing.Size(20, 25) ' 'mnbAdd ' Me.mnbAdd.DisplayStyle = System.Windows.Forms.ToolStripItemDisplayStyle.Image Me.mnbAdd.Image = CType(resources.GetObject("mnbAdd.Image"), System.Drawing.Image) Me.mnbAdd.ImageTransparentColor = System.Drawing.Color.Magenta Me.mnbAdd.Name = "mnbAdd" Me.mnbAdd.Size = New System.Drawing.Size(23, 22) Me.mnbAdd.Text = "Création Tronçon / Itinéraire" ' 'mnbDelete ' Me.mnbDelete.DisplayStyle = System.Windows.Forms.ToolStripItemDisplayStyle.Image Me.mnbDelete.Image = CType(resources.GetObject("mnbDelete.Image"), System.Drawing.Image) Me.mnbDelete.ImageTransparentColor = System.Drawing.Color.Magenta Me.mnbDelete.Name = "mnbDelete" Me.mnbDelete.Size = New System.Drawing.Size(23, 22) Me.mnbDelete.Text = "Supprimer les éléments sélectionnés" ' 'mnbSeparator2 ' Me.mnbSeparator2.AutoSize = False Me.mnbSeparator2.Name = "mnbSeparator2" Me.mnbSeparator2.Size = New System.Drawing.Size(20, 25) ' 'mnbDropDownAction ' Me.mnbDropDownAction.DisplayStyle = System.Windows.Forms.ToolStripItemDisplayStyle.Image Me.mnbDropDownAction.DropDownItems.AddRange(New System.Windows.Forms.ToolStripItem() {Me.mnbDropDownActionSens, Me.mnbDropDownActionSeparator1, Me.mnbDropDownActionDistances, Me.mnbDropDownActionSeparator2, Me.mnbDropDownActionArretsPhysiques}) Me.mnbDropDownAction.Image = CType(resources.GetObject("mnbDropDownAction.Image"), System.Drawing.Image) Me.mnbDropDownAction.ImageTransparentColor = System.Drawing.Color.Magenta Me.mnbDropDownAction.Name = "mnbDropDownAction" Me.mnbDropDownAction.Size = New System.Drawing.Size(29, 22) Me.mnbDropDownAction.Text = "Action sur le plan de ligne" ' 'mnbDropDownActionSens ' Me.mnbDropDownActionSens.Checked = True Me.mnbDropDownActionSens.CheckOnClick = True Me.mnbDropDownActionSens.CheckState = System.Windows.Forms.CheckState.Checked Me.mnbDropDownActionSens.Name = "mnbDropDownActionSens" Me.mnbDropDownActionSens.Size = New System.Drawing.Size(222, 22) Me.mnbDropDownActionSens.Text = "Afficher le sens" ' 'mnbDropDownActionSeparator1 ' Me.mnbDropDownActionSeparator1.Name = "mnbDropDownActionSeparator1" Me.mnbDropDownActionSeparator1.Size = New System.Drawing.Size(219, 6) ' 'mnbDropDownActionDistances ' Me.mnbDropDownActionDistances.Checked = True Me.mnbDropDownActionDistances.CheckOnClick = True Me.mnbDropDownActionDistances.CheckState = System.Windows.Forms.CheckState.Checked Me.mnbDropDownActionDistances.Name = "mnbDropDownActionDistances" Me.mnbDropDownActionDistances.Size = New System.Drawing.Size(222, 22) Me.mnbDropDownActionDistances.Text = "Afficher les distances" ' 'mnbDropDownActionSeparator2 ' Me.mnbDropDownActionSeparator2.Name = "mnbDropDownActionSeparator2" Me.mnbDropDownActionSeparator2.Size = New System.Drawing.Size(219, 6) ' 'mnbDropDownActionArretsPhysiques ' Me.mnbDropDownActionArretsPhysiques.Checked = True Me.mnbDropDownActionArretsPhysiques.CheckOnClick = True Me.mnbDropDownActionArretsPhysiques.CheckState = System.Windows.Forms.CheckState.Checked Me.mnbDropDownActionArretsPhysiques.Name = "mnbDropDownActionArretsPhysiques" Me.mnbDropDownActionArretsPhysiques.Size = New System.Drawing.Size(222, 22) Me.mnbDropDownActionArretsPhysiques.Text = "Afficher les arrêts physiques" ' 'mnbSeparator3 ' Me.mnbSeparator3.AutoSize = False Me.mnbSeparator3.Name = "mnbSeparator3" Me.mnbSeparator3.Size = New System.Drawing.Size(20, 25) ' 'mnbSelectionZoom ' Me.mnbSelectionZoom.CheckOnClick = True Me.mnbSelectionZoom.DisplayStyle = System.Windows.Forms.ToolStripItemDisplayStyle.Image Me.mnbSelectionZoom.Image = CType(resources.GetObject("mnbSelectionZoom.Image"), System.Drawing.Image) Me.mnbSelectionZoom.ImageTransparentColor = System.Drawing.Color.Magenta Me.mnbSelectionZoom.Name = "mnbSelectionZoom" Me.mnbSelectionZoom.Size = New System.Drawing.Size(23, 22) Me.mnbSelectionZoom.Text = "Zoom par sélection" ' 'mnbCancelZoom ' Me.mnbCancelZoom.DisplayStyle = System.Windows.Forms.ToolStripItemDisplayStyle.Image Me.mnbCancelZoom.Image = CType(resources.GetObject("mnbCancelZoom.Image"), System.Drawing.Image) Me.mnbCancelZoom.ImageTransparentColor = System.Drawing.Color.Magenta Me.mnbCancelZoom.Name = "mnbCancelZoom" Me.mnbCancelZoom.Size = New System.Drawing.Size(23, 22) Me.mnbCancelZoom.Text = "Annuler le zoom" ' 'mnbSeparator4 ' Me.mnbSeparator4.AutoSize = False Me.mnbSeparator4.Name = "mnbSeparator4" Me.mnbSeparator4.Size = New System.Drawing.Size(20, 25) ' 'mnbParametrage ' Me.mnbParametrage.DisplayStyle = System.Windows.Forms.ToolStripItemDisplayStyle.Image Me.mnbParametrage.Image = CType(resources.GetObject("mnbParametrage.Image"), System.Drawing.Image) Me.mnbParametrage.ImageTransparentColor = System.Drawing.Color.Magenta Me.mnbParametrage.Name = "mnbParametrage" Me.mnbParametrage.Size = New System.Drawing.Size(23, 22) Me.mnbParametrage.Text = "Paramétrage" ' 'mncSPlacerArret ' Me.mncSPlacerArret.Name = "mncSPlacerArret" Me.mncSPlacerArret.Size = New System.Drawing.Size(216, 22) Me.mncSPlacerArret.Text = "Placer un arrêt" ' 'mncSSeparator1 ' Me.mncSSeparator1.Name = "mncSSeparator1" Me.mncSSeparator1.Size = New System.Drawing.Size(213, 6) ' 'mncSImage ' Me.mncSImage.Name = "mncSImage" Me.mncSImage.Size = New System.Drawing.Size(216, 22) Me.mncSImage.Text = "Image..." ' 'mncSDefinirLastArret ' Me.mncSDefinirLastArret.Name = "mncSDefinirLastArret" Me.mncSDefinirLastArret.Size = New System.Drawing.Size(216, 22) Me.mncSDefinirLastArret.Text = "Définir comme dernier arrêt" ' 'mncSSeparator2 ' Me.mncSSeparator2.Name = "mncSSeparator2" Me.mncSSeparator2.Size = New System.Drawing.Size(213, 6) ' 'mncSSupprimerArrets ' Me.mncSSupprimerArrets.Name = "mncSSupprimerArrets" Me.mncSSupprimerArrets.Size = New System.Drawing.Size(216, 22) Me.mncSSupprimerArrets.Text = "Supprimer le ou les arrêts" ' 'mncSInsererArret ' Me.mncSInsererArret.Name = "mncSInsererArret" Me.mncSInsererArret.Size = New System.Drawing.Size(216, 22) Me.mncSInsererArret.Text = "Insérer un arrêt" ' 'mncSSeparator3 ' Me.mncSSeparator3.Name = "mncSSeparator3" Me.mncSSeparator3.Size = New System.Drawing.Size(213, 6) ' 'mncSInformations ' Me.mncSInformations.Name = "mncSInformations" Me.mncSInformations.Size = New System.Drawing.Size(216, 22) Me.mncSInformations.Text = "Modifier les informations" ' 'mncSSupprimerSegment ' Me.mncSSupprimerSegment.Name = "mncSSupprimerSegment" Me.mncSSupprimerSegment.Size = New System.Drawing.Size(216, 22) Me.mncSSupprimerSegment.Text = "Supprimer le segment" ' 'mncSSeparator4 ' Me.mncSSeparator4.Name = "mncSSeparator4" Me.mncSSeparator4.Size = New System.Drawing.Size(213, 6) ' 'mncSBatirTroncon ' Me.mncSBatirTroncon.Name = "mncSBatirTroncon" Me.mncSBatirTroncon.Size = New System.Drawing.Size(216, 22) Me.mncSBatirTroncon.Text = "Bâtir un tronçon" ' 'mncTInformations ' Me.mncTInformations.Name = "mncTInformations" Me.mncTInformations.Size = New System.Drawing.Size(201, 22) Me.mncTInformations.Text = "Modifier les informations" ' 'mncTDistances ' Me.mncTDistances.Name = "mncTDistances" Me.mncTDistances.Size = New System.Drawing.Size(201, 22) Me.mncTDistances.Text = "Modifier les distances" ' 'mncTSeparator1 ' Me.mncTSeparator1.Name = "mncTSeparator1" Me.mncTSeparator1.Size = New System.Drawing.Size(198, 6) ' 'mncTTempsDeParcours ' Me.mncTTempsDeParcours.Name = "mncTTempsDeParcours" Me.mncTTempsDeParcours.Size = New System.Drawing.Size(201, 22) Me.mncTTempsDeParcours.Text = "Temps de parcours" ' 'mncTSeparator2 ' Me.mncTSeparator2.Name = "mncTSeparator2" Me.mncTSeparator2.Size = New System.Drawing.Size(198, 6) ' 'mncTCreerSensInverse ' Me.mncTCreerSensInverse.Name = "mncTCreerSensInverse" Me.mncTCreerSensInverse.Size = New System.Drawing.Size(201, 22) Me.mncTCreerSensInverse.Text = "Créer le sens inverse" ' 'mncTSeparator3 ' Me.mncTSeparator3.Name = "mncTSeparator3" Me.mncTSeparator3.Size = New System.Drawing.Size(198, 6) ' 'mncTSupprimerTroncon ' Me.mncTSupprimerTroncon.Name = "mncTSupprimerTroncon" Me.mncTSupprimerTroncon.Size = New System.Drawing.Size(201, 22) Me.mncTSupprimerTroncon.Text = "Supprimer le tronçon" ' 'mncTBatirItineraire ' Me.mncTBatirItineraire.Name = "mncTBatirItineraire" Me.mncTBatirItineraire.Size = New System.Drawing.Size(201, 22) Me.mncTBatirItineraire.Text = "Bâtir un itinéraire" ' 'mncIInformations ' Me.mncIInformations.Name = "mncIInformations" Me.mncIInformations.Size = New System.Drawing.Size(201, 22) Me.mncIInformations.Text = "Modifier les informations" ' 'mncISeparator1 ' Me.mncISeparator1.Name = "mncISeparator1" Me.mncISeparator1.Size = New System.Drawing.Size(198, 6) ' 'mncISupprimerItineraire ' Me.mncISupprimerItineraire.Name = "mncISupprimerItineraire" Me.mncISupprimerItineraire.Size = New System.Drawing.Size(201, 22) Me.mncISupprimerItineraire.Text = "Supprimer l'itinéraires" ' 'SplitContainer ' Me.SplitContainer.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D Me.SplitContainer.Dock = System.Windows.Forms.DockStyle.Fill Me.SplitContainer.FixedPanel = System.Windows.Forms.FixedPanel.Panel2 Me.SplitContainer.Location = New System.Drawing.Point(0, 25) Me.SplitContainer.Name = "SplitContainer" ' 'SplitContainer.Panel1 ' Me.SplitContainer.Panel1.AutoScroll = True Me.SplitContainer.Panel1.Controls.Add(Me.ElementHost1) ' 'SplitContainer.Panel2 ' Me.SplitContainer.Panel2.Controls.Add(Me.lblTitreCreation) Me.SplitContainer.Panel2.Controls.Add(Me.Panel1) Me.SplitContainer.Panel2.Controls.Add(Me.grdCreation) Me.SplitContainer.Panel2MinSize = 0 Me.SplitContainer.Size = New System.Drawing.Size(605, 418) Me.SplitContainer.SplitterDistance = 428 Me.SplitContainer.SplitterWidth = 2 Me.SplitContainer.TabIndex = 1 ' 'ElementHost1 ' Me.ElementHost1.Dock = System.Windows.Forms.DockStyle.Fill Me.ElementHost1.Location = New System.Drawing.Point(0, 0) Me.ElementHost1.Name = "ElementHost1" Me.ElementHost1.Size = New System.Drawing.Size(424, 414) Me.ElementHost1.TabIndex = 0 Me.ElementHost1.Text = "ElementHost1" Me.ElementHost1.Child = Me._StopsCanvas ' 'lblTitreCreation ' Me.lblTitreCreation.Anchor = CType(((System.Windows.Forms.AnchorStyles.Top Or System.Windows.Forms.AnchorStyles.Left) _ Or System.Windows.Forms.AnchorStyles.Right), System.Windows.Forms.AnchorStyles) Me.lblTitreCreation.Location = New System.Drawing.Point(3, 4) Me.lblTitreCreation.Name = "lblTitreCreation" Me.lblTitreCreation.Size = New System.Drawing.Size(167, 16) Me.lblTitreCreation.TabIndex = 4 ' 'Panel1 ' Me.Panel1.AutoSize = True Me.Panel1.AutoSizeMode = System.Windows.Forms.AutoSizeMode.GrowAndShrink Me.Panel1.Controls.Add(Me.btnOk) Me.Panel1.Controls.Add(Me.btnAnnuler) Me.Panel1.Dock = System.Windows.Forms.DockStyle.Bottom Me.Panel1.Location = New System.Drawing.Point(0, 385) Me.Panel1.Name = "Panel1" Me.Panel1.Size = New System.Drawing.Size(171, 29) Me.Panel1.TabIndex = 3 ' 'btnOk ' Me.btnOk.Anchor = CType((System.Windows.Forms.AnchorStyles.Top Or System.Windows.Forms.AnchorStyles.Right), System.Windows.Forms.AnchorStyles) Me.btnOk.BackColor = System.Drawing.SystemColors.Control Me.btnOk.FlatAppearance.MouseDownBackColor = System.Drawing.Color.LightSlateGray Me.btnOk.FlatAppearance.MouseOverBackColor = System.Drawing.Color.LightSteelBlue Me.btnOk.FlatStyle = System.Windows.Forms.FlatStyle.Flat Me.btnOk.Font = New System.Drawing.Font("Microsoft Sans Serif", 8.25!, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, CType(0, Byte)) Me.btnOk.ForeColor = System.Drawing.SystemColors.ControlText Me.btnOk.Location = New System.Drawing.Point(12, 3) Me.btnOk.Name = "btnOk" Me.btnOk.Size = New System.Drawing.Size(75, 23) Me.btnOk.TabIndex = 6 Me.btnOk.Text = "OK" Me.btnOk.UseVisualStyleBackColor = True ' 'btnAnnuler ' Me.btnAnnuler.Anchor = CType((System.Windows.Forms.AnchorStyles.Top Or System.Windows.Forms.AnchorStyles.Right), System.Windows.Forms.AnchorStyles) Me.btnAnnuler.BackColor = System.Drawing.SystemColors.Control Me.btnAnnuler.DialogResult = System.Windows.Forms.DialogResult.Cancel Me.btnAnnuler.FlatAppearance.MouseDownBackColor = System.Drawing.Color.LightSlateGray Me.btnAnnuler.FlatAppearance.MouseOverBackColor = System.Drawing.Color.LightSteelBlue Me.btnAnnuler.FlatStyle = System.Windows.Forms.FlatStyle.Flat Me.btnAnnuler.Font = New System.Drawing.Font("Microsoft Sans Serif", 8.25!, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, CType(0, Byte)) Me.btnAnnuler.ForeColor = System.Drawing.SystemColors.ControlText Me.btnAnnuler.Location = New System.Drawing.Point(93, 3) Me.btnAnnuler.Name = "btnAnnuler" Me.btnAnnuler.Size = New System.Drawing.Size(75, 23) Me.btnAnnuler.TabIndex = 7 Me.btnAnnuler.Text = "Annuler" Me.btnAnnuler.UseVisualStyleBackColor = True ' 'grdCreation ' Me.grdCreation.Anchor = CType((((System.Windows.Forms.AnchorStyles.Top Or System.Windows.Forms.AnchorStyles.Bottom) _ Or System.Windows.Forms.AnchorStyles.Left) _ Or System.Windows.Forms.AnchorStyles.Right), System.Windows.Forms.AnchorStyles) Me.grdCreation.AutoResizeColumns = False Me.grdCreation.ColumnsFiltreActif = False Appearance1.BackColor = System.Drawing.SystemColors.Window Appearance1.BorderColor = System.Drawing.SystemColors.InactiveCaption Me.grdCreation.DisplayLayout.Appearance = Appearance1 Me.grdCreation.DisplayLayout.BorderStyle = Infragistics.Win.UIElementBorderStyle.Solid Me.grdCreation.DisplayLayout.CaptionVisible = Infragistics.Win.DefaultableBoolean.[False] Appearance2.BackColor = System.Drawing.SystemColors.ActiveBorder Appearance2.BackColor2 = System.Drawing.SystemColors.ControlDark Appearance2.BackGradientStyle = Infragistics.Win.GradientStyle.Vertical Appearance2.BorderColor = System.Drawing.SystemColors.Window Me.grdCreation.DisplayLayout.GroupByBox.Appearance = Appearance2 Appearance3.ForeColor = System.Drawing.SystemColors.GrayText Me.grdCreation.DisplayLayout.GroupByBox.BandLabelAppearance = Appearance3 Me.grdCreation.DisplayLayout.GroupByBox.BorderStyle = Infragistics.Win.UIElementBorderStyle.Solid Appearance4.BackColor = System.Drawing.SystemColors.ControlLightLight Appearance4.BackColor2 = System.Drawing.SystemColors.Control Appearance4.BackGradientStyle = Infragistics.Win.GradientStyle.Horizontal Appearance4.ForeColor = System.Drawing.SystemColors.GrayText Me.grdCreation.DisplayLayout.GroupByBox.PromptAppearance = Appearance4 Me.grdCreation.DisplayLayout.MaxColScrollRegions = 1 Me.grdCreation.DisplayLayout.MaxRowScrollRegions = 1 Appearance5.BackColor = System.Drawing.SystemColors.Window Appearance5.ForeColor = System.Drawing.SystemColors.ControlText Me.grdCreation.DisplayLayout.Override.ActiveCellAppearance = Appearance5 Appearance6.BackColor = System.Drawing.SystemColors.Highlight Appearance6.ForeColor = System.Drawing.SystemColors.HighlightText Me.grdCreation.DisplayLayout.Override.ActiveRowAppearance = Appearance6 Me.grdCreation.DisplayLayout.Override.AllowRowFiltering = Infragistics.Win.DefaultableBoolean.[False] Me.grdCreation.DisplayLayout.Override.BorderStyleCell = Infragistics.Win.UIElementBorderStyle.Dotted Me.grdCreation.DisplayLayout.Override.BorderStyleRow = Infragistics.Win.UIElementBorderStyle.Dotted Appearance7.BackColor = System.Drawing.SystemColors.Window Me.grdCreation.DisplayLayout.Override.CardAreaAppearance = Appearance7 Appearance8.BorderColor = System.Drawing.Color.Silver Appearance8.TextTrimming = Infragistics.Win.TextTrimming.EllipsisCharacter Me.grdCreation.DisplayLayout.Override.CellAppearance = Appearance8 Me.grdCreation.DisplayLayout.Override.CellPadding = 0 Appearance9.BackColor = System.Drawing.SystemColors.Control Appearance9.BackColor2 = System.Drawing.SystemColors.ControlDark Appearance9.BackGradientAlignment = Infragistics.Win.GradientAlignment.Element Appearance9.BackGradientStyle = Infragistics.Win.GradientStyle.Horizontal Appearance9.BorderColor = System.Drawing.SystemColors.Window Me.grdCreation.DisplayLayout.Override.GroupByRowAppearance = Appearance9 Appearance10.TextHAlignAsString = "Left" Me.grdCreation.DisplayLayout.Override.HeaderAppearance = Appearance10 Me.grdCreation.DisplayLayout.Override.HeaderClickAction = Infragistics.Win.UltraWinGrid.HeaderClickAction.SortMulti Me.grdCreation.DisplayLayout.Override.HeaderStyle = Infragistics.Win.HeaderStyle.WindowsXPCommand Appearance11.BackColor = System.Drawing.SystemColors.Window Appearance11.BorderColor = System.Drawing.Color.Silver Me.grdCreation.DisplayLayout.Override.RowAppearance = Appearance11 Me.grdCreation.DisplayLayout.Override.RowSelectors = Infragistics.Win.DefaultableBoolean.[False] Appearance12.BackColor = System.Drawing.SystemColors.ControlLight Me.grdCreation.DisplayLayout.Override.TemplateAddRowAppearance = Appearance12 Me.grdCreation.DisplayLayout.ScrollBounds = Infragistics.Win.UltraWinGrid.ScrollBounds.ScrollToFill Me.grdCreation.DisplayLayout.ScrollStyle = Infragistics.Win.UltraWinGrid.ScrollStyle.Immediate Me.grdCreation.DisplayLayout.ViewStyleBand = Infragistics.Win.UltraWinGrid.ViewStyleBand.OutlookGroupBy Me.grdCreation.Font = New System.Drawing.Font("Times New Roman", 8.25!, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, CType(0, Byte)) Me.grdCreation.Location = New System.Drawing.Point(0, 23) Me.grdCreation.Name = "grdCreation" Me.grdCreation.PrintColumnsKey = Nothing Me.grdCreation.PrintRowsIndex = Nothing Me.grdCreation.PrintTitle = Nothing Me.grdCreation.RowsActivation = Infragistics.Win.UltraWinGrid.Activation.AllowEdit Me.grdCreation.Size = New System.Drawing.Size(175, 391) Me.grdCreation.TabIndex = 5 Me.grdCreation.Tag = "" ' 'PlanDeLigne ' Me.AutoScaleDimensions = New System.Drawing.SizeF(6.0!, 13.0!) Me.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font Me.Controls.Add(Me.SplitContainer) Me.Controls.Add(Me.mnbMenu) Me.MinimumSize = New System.Drawing.Size(605, 431) Me.Name = "PlanDeLigne" Me.Size = New System.Drawing.Size(605, 443) Me.mnbMenu.ResumeLayout(False) Me.mnbMenu.PerformLayout() Me.SplitContainer.Panel1.ResumeLayout(False) Me.SplitContainer.Panel2.ResumeLayout(False) Me.SplitContainer.Panel2.PerformLayout() CType(Me.SplitContainer, System.ComponentModel.ISupportInitialize).EndInit() Me.SplitContainer.ResumeLayout(False) Me.Panel1.ResumeLayout(False) CType(Me.grdCreation, System.ComponentModel.ISupportInitialize).EndInit() Me.ResumeLayout(False) Me.PerformLayout() End Sub

  Read the article

• Multiple markers in Googe Maps API v3 that link to different pages when clicked

  - by Dave

  I have a map with multiple markers, which I populate via an array. Each marker is clickable and should take the user to a different url per marker. The problem is that all the markers, while displaying the correct title, all use the url of the last entry in the array. Here is my code: var myOptions = { zoom: 9, center: new google.maps.LatLng(40.81940575,-73.95647955), mapTypeId: google.maps.MapTypeId.TERRAIN } var map = new google.maps.Map(document.getElementById("bigmap"), myOptions); setMarkers(map, properties); var properties = [ ['106 Ft Washington Avenue',40.8388485,-73.9436015,'Mjg4'], ['213 Bennett Avenue',40.8574384,-73.9333426,'Mjkz'], ['50 Overlook Terrace',40.8543752,-73.9362542,'Mjky'], ['850 West 176 Street',40.8476012,-73.9417571,'OTM='], ['915 West End Avenue',40.8007478,-73.9692155,'Mjkx']]; function setMarkers(map, buildings) { var image = new google.maps.MarkerImage('map_marker.png', new google.maps.Size(19,32), new google.maps.Point(0,0), new google.maps.Point(10,32)); var shadow = new google.maps.MarkerImage('map_marker_shadow.png', new google.maps.Size(28,32), new google.maps.Point(0,0), new google.maps.Point(10,32)); var bounds = new google.maps.LatLngBounds; for (var i in buildings) { var myLatLng = new google.maps.LatLng(buildings[i][1], buildings[i][2]); bounds.extend(myLatLng); var marker = new google.maps.Marker({ position: myLatLng, map: map, shadow: shadow, icon: image, title: buildings[i][0] }); google.maps.event.addListener(marker, 'click', function() { window.location = ('detail?b=' + buildings[i][3]); }); } map.fitBounds(bounds); } Using this code, clicking any marker take the user to 'detail?b=Mjkx' What am I doing wrong?

  Read the article

• How can I put multiple markers on Google maps with Javascript API v3?

  - by Doe

  Hi, I'd like to know how to put multiple markers for Google Maps using Javascript API v3. I tried the solution posted here: http://stackoverflow.com/questions/1621991/multiple-markers-in-googe-maps-api-v3-that-link-to-different-pages-when-clicked but it does not work for me for some reason. var directionDisplay; function initialize() { var myOptions = { zoom: 9, center: new google.maps.LatLng(40.81940575,-73.95647955), mapTypeId: google.maps.MapTypeId.TERRAIN } var map = new google.maps.Map(document.getElementById("map_canvas"), myOptions); setMarkers(map, properties); var properties = [ ['106 Ft Washington Avenue',40.8388485,-73.9436015,'Mjg4'], ]; function setMarkers(map, buildings) { var image = new google.maps.MarkerImage('map_marker.png', new google.maps.Size(19,32), new google.maps.Point(0,0), new google.maps.Point(10,32)); var shadow = new google.maps.MarkerImage('map_marker_shadow.png', new google.maps.Size(28,32), new google.maps.Point(0,0), new google.maps.Point(10,32)); var bounds = new google.maps.LatLngBounds; for (var i in buildings) { var myLatLng = new google.maps.LatLng(buildings[i][1], buildings[i][2]); bounds.extend(myLatLng); var marker = new google.maps.Marker({ position: myLatLng, map: map, shadow: shadow, icon: image, title: buildings[i][0] }); google.maps.event.addListener(marker, 'click', function() { window.location = ('detail?b=' + buildings[i][3]); }); } map.fitBounds(bounds); } } </script> Could anyone kindly explain why this doesn't work for me?

  Read the article

• Why does Internet Explorer break "pegman" display in Google Maps API v3?

  - by Chad

  On my site here, the SteetView control, aka "Pegman", works great under Firefox. Under IE (7 in this case, but tested on 8 as well - same result) it breaks the display of the pegman control. Here's my map code: var directionsDisplay; var directionsService = new google.maps.DirectionsService(); var map; directionsDisplay = new google.maps.DirectionsRenderer(); var milBase = new google.maps.LatLng(35.79648921414565, 139.40663874149323); var mapOpts = { streetViewControl: true, zoom: 12, center: milBase, mapTypeControlOptions: { style: google.maps.MapTypeControlStyle.DROPDOWN_MENU }, mapTypeId: google.maps.MapTypeId.ROADMAP }; map = new google.maps.Map($("#dirMap").get(0), mapOpts); directionsDisplay.setMap(map); var basePoly = new google.maps.Polygon({ paths: [new google.maps.LatLng(35.724496338474104, 139.3444061279297), new google.maps.LatLng(35.74748750802863, 139.3363380432129), new google.maps.LatLng(35.75765724051559, 139.34303283691406), new google.maps.LatLng(35.76545779822543, 139.3418312072754), new google.maps.LatLng(35.767547103447725, 139.3476676940918), new google.maps.LatLng(35.75835374997911, 139.34955596923828), new google.maps.LatLng(35.755149755962755, 139.3567657470703), new google.maps.LatLng(35.74679090345495, 139.35796737670898), new google.maps.LatLng(35.74762682821177, 139.36294555664062), new google.maps.LatLng(35.744422402303826, 139.36346054077148), new google.maps.LatLng(35.74860206266584, 139.36946868896484), new google.maps.LatLng(35.735644401200986, 139.36843872070312), new google.maps.LatLng(35.73843117306677, 139.36174392700195), new google.maps.LatLng(35.73592308277646, 139.3531608581543), new google.maps.LatLng(35.72686543236113, 139.35298919677734), new google.maps.LatLng(35.724496338474104, 139.3444061279297)], strokeColor: "#ff0000", strokeOpacity: 0.8, strokeWeight: 2, fillColor: "#FF0000", fillOpacity: 0.35 }); basePoly.setMap(map); var marker = new google.maps.Marker({ position: new google.maps.LatLng(35.79648921414565, 139.40663874149323), map: map, title: "Ruby International" }); function calcRoute() { var start = new google.maps.LatLng(35.74005964772476, 139.37083393335342); var end = new google.maps.LatLng(35.79648921414565, 139.40663874149323); var request = { origin: start, destination: end, travelMode: google.maps.DirectionsTravelMode.DRIVING }; directionsService.route(request, function(result, status) { if (status == google.maps.DirectionsStatus.OK) { directionsDisplay.setDirections(result); } }); } The only real difference from my code and Google's code is that I use jQuery's document ready function instead of the body onload event to initialize my map. Can't imagine that's the cause though (works in v2 of the maps). Have I found a bug or is there something wrong in my code? Thanks in advance!

  Read the article

• Using Google Maps v3, PHP and Json to plot markers

  - by bateman_ap

  Hi, I am creating a map using the new(ish) v3 of the Google Maps API I have managed to get a map displaying using code as below: var myLatlng = new google.maps.LatLng(50.8194000,-0.1363000); var myOptions = { zoom: 14, center: myLatlng, mapTypeControl: false, scrollwheel: false, mapTypeId: google.maps.MapTypeId.ROADMAP }; var map = new google.maps.Map(document.getElementById("location-map"), myOptions); However I now want to add a number of markers I have stored in a PHP array. The Array currently looks like this if I print it out to screen: Array ( [0] => Array ( [poiUid] => 20 [poiName] => Brighton Cineworld [poiCode] => brighton-cineworld [poiLon] => -0.100450 [poiLat] => 50.810780 [poiType] => Cinemas ) [1] => Array ( [poiUid] => 21 [poiName] => Brighton Odeon [poiCode] => brighton-odeon [poiLon] => -0.144420 [poiLat] => 50.821860 [poiType] => Cinemas ) ) All the reading I have done so far suggests I turn this into JSON by using json_encode If I run the Array though this and echo it to the screen I get: [{"poiUid":"20","poiName":"Brighton Cineworld","poiCode":"brighton-cineworld","poiLon":"-0.100450","poiLat":"50.810780","poiType":"Cinemas"},{"poiUid":"21","poiName":"Brighton Odeon","poiCode":"brighton-odeon","poiLon":"-0.144420","poiLat":"50.821860","poiType":"Cinemas"}] The bit now is where I am struggling, I am not sure the encoded array is what I need to start populating markers, I think I need something like the code below but not sure how to add the markers from my passed through JSON var locations = $jsonPoiArray; for (var i = 0;i < locations.length; i += 1) { // Create a new marker };

  Read the article

• How to update a QPixmap in a QGraphicsView with PyQt

  - by pops

  I am trying to paint on a QPixmap inside a QGraphicsView. The painting works fine, but the QGraphicsView doesn't update it. Here is some working code: #!/usr/bin/env python from PyQt4 import QtCore from PyQt4 import QtGui class Canvas(QtGui.QPixmap): """ Canvas for drawing""" def __init__(self, parent=None): QtGui.QPixmap.__init__(self, 64, 64) self.parent = parent self.imH = 64 self.imW = 64 self.fill(QtGui.QColor(0, 255, 255)) self.color = QtGui.QColor(0, 0, 0) def paintEvent(self, point=False): if point: p = QtGui.QPainter(self) p.setPen(QtGui.QPen(self.color, 1, QtCore.Qt.SolidLine)) p.drawPoints(point) def clic(self, mouseX, mouseY): self.paintEvent(QtCore.QPoint(mouseX, mouseY)) class GraphWidget(QtGui.QGraphicsView): """ Display, zoom, pan...""" def __init__(self): QtGui.QGraphicsView.__init__(self) self.im = Canvas(self) self.imH = self.im.height() self.imW = self.im.width() self.zoomN = 1 self.scene = QtGui.QGraphicsScene(self) self.scene.setItemIndexMethod(QtGui.QGraphicsScene.NoIndex) self.scene.setSceneRect(0, 0, self.imW, self.imH) self.scene.addPixmap(self.im) self.setScene(self.scene) self.setTransformationAnchor(QtGui.QGraphicsView.AnchorUnderMouse) self.setResizeAnchor(QtGui.QGraphicsView.AnchorViewCenter) self.setMinimumSize(400, 400) self.setWindowTitle("pix") def mousePressEvent(self, event): if event.buttons() == QtCore.Qt.LeftButton: pos = self.mapToScene(event.pos()) self.im.clic(pos.x(), pos.y()) #~ self.scene.update(0,0,64,64) #~ self.updateScene([QtCore.QRectF(0,0,64,64)]) self.scene.addPixmap(self.im) print('items') print(self.scene.items()) else: return QtGui.QGraphicsView.mousePressEvent(self, event) def wheelEvent(self, event): if event.delta() > 0: self.scaleView(2) elif event.delta() < 0: self.scaleView(0.5) def scaleView(self, factor): n = self.zoomN * factor if n < 1 or n > 16: return self.zoomN = n self.scale(factor, factor) if __name__ == '__main__': import sys app = QtGui.QApplication(sys.argv) widget = GraphWidget() widget.show() sys.exit(app.exec_()) The mousePressEvent does some painting on the QPixmap. But the only solution I have found to update the display is to make a new instance (which is not a good solution). How do I just update it?

  Read the article

• How can I pass an arbitrary object to jasper report as parameter?

  - by spderosso

  Hi, I would like to pass as a parameter to my .jrxml an arbitrary object of my domain, e.g a Person. InputStream reportFile = MyPage.this.getClass().getResourceAsStream("test.jrxml"); HashMap<String, Person> parameters = new HashMap<String, Person>(); parameters.put("person", new Person("John", "Doe")); ... JasperReport report = JasperCompileManager.compileReport(reportFile); JasperPrint print = JasperFillManager.fillReport(report, parameters, new JREmptyDataSource()); return JasperExportManager.exportReportToPdf(print); And on the .jrxml do something like: <?xml version="1.0" encoding="UTF-8"?> <jasperReport xmlns="http://jasperreports.sourceforge.net/jasperreports" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://jasperreports.sourceforge.net/jasperreports http://jasperreports.sourceforge.net/xsd/jasperreport.xsd" name="test" pageWidth="595" pageHeight="842" columnWidth="555" leftMargin="20" rightMargin="20" topMargin="20" bottomMargin="20"> <property name="ireport.zoom" value="1.0"/> <property name="ireport.x" value="0"/> <property name="ireport.y" value="0"/> <parameter name="PERSON" isForPrompting="false" class="myApp.domain.person"/> <background> <band splitType="Stretch"/> </background> <title> <band height="20"> <staticText> <reportElement x="180" y="0" width="200" height="20"/> <text><![CDATA[$P{PERSON.lastName}]]></text> </staticText> </band> </title> ... Is something like this possible? Where can I find more complex tutorials that show more than just passing a java.lang.String? Thanks

  Read the article

• Nested UIScrollView-iPhone photos application

  - by abhishek trivedi

  Hi, I have been facing the same nested UIScrollView problem for long time.I tried some open source codes like Scrolling madness ,three-20 and others but all fails finaly.I am trying to make a photo Viewer application same as iPhone.For that I have created the structure like this:- 1)one View controller. 2)on view of view controller one UIScrollView (i.e inner/parent scroll view) as a child. 3)on inner/parent scroll view number of child scroll views(i.e. outer/child scroll views) ,each represents one page of photos application. 4)On each scroll view one image View on which i am displaying my image. So what I want is when user scrolls the outer scroll view it should scroll horizontally with all the child views so I will get the look and feel of paging in photos application.Also when user is on one specific image(i.e. child/outer scroll view) he should be able to zoom in/out,swipes and perform single/double tapping.I was able to make it work in sdk 2.1,but it dosnt work since sdk 3.0.Please tell me the idea behind your project.Means which scroll view you are subclassing ,in which view to detect touches.How this completely child - parent relation should be. If possible provide any sample code also.

  Read the article

• Google maps API V3 code to V2 help.

  - by abemonkey

  I've started working on a project to inject markers into a map with jQuery by looping through rows on a table in the page. After getting it working I realized that I was accessing the V3 API and using V3 syntax. I've been beating my head against a wall trying to get this working in google maps API V2. If someone could please take a look at my code and help that would be great! Thanks! You can see my little test in action at www.axtsweapons.com/maptest.html. Here is the JS code: <script type="text/javascript"> $(function() { var latlng = new google.maps.LatLng(45.440000,-122.630000); var settings = { zoom: 12, center: latlng, disableDefaultUI: false, mapTypeControl:false, mapTypeId: google.maps.MapTypeId.ROADMAP }; var map = new google.maps.Map(document.getElementById("map_canvas"), settings); $('tr').each(function(i) { var the_marker = new google.maps.Marker({ title: $(this).find('.views-field-title').text(), map: map, clickable: true, position: new google.maps.LatLng( parseFloat($(this).find('.views-field-latitude').text()), parseFloat($(this).find('.views-field-longitude').text()) ) }); var bounds = new google.maps.LatLngBounds(); var infowindow = new google.maps.InfoWindow({ content: $(this).find('.views-field-title').text() + $(this).find('.adr').text() }); new google.maps.event.addListener(the_marker, 'click', function() { infowindow.close(); infowindow.open(map, the_marker); }); }); }); </script>

  Read the article

• jstl taglib not found, where have I gone wrong?

  - by James.Elsey

  I'm trying to add Google Maps onto my JSPs by using the googlemaps jstl taglib. I've added this into my maven pom <dependency> <groupId>com.lamatek</groupId> <artifactId>googlemaps</artifactId> <version>0.98c</version> <scope>provided<>/scope </dependency> This then included the googlemaps-0.98c library under my project libraries in NetBeans, I right clicked and selected Manually install artifact and located the googlemaps.jar file I had downloaded. I've then added this into my taglibs file <%@taglib prefix="googlemaps" uri="/WEB-INF/googlemaps" %> And have then included this where I actually want to show a map on my jsp <googlemaps:map id="map" width="250" height="300" version="2" type="STREET" zoom="12"> <googlemaps:key domain="localhost" key="xxxx"/> <googlemaps:point id="point1" address="74 Connors Lane" city="Elkton" state="MD" zipcode="21921" country="US"/> <googlemaps:marker id="marker1" point="point1"/> </googlemaps:map> But when I load up my application, I get the following error. org.apache.jasper.JasperException: /jsp/dashboard.jsp(1,1) /jsp/common/taglibs.jsp(6,56) PWC6117: File "/WEB-INF/googlemaps" not found root cause org.apache.jasper.JasperException: /jsp/common/taglibs.jsp(6,56) PWC6117: File "/WEB-INF/googlemaps" not found Have I missed something simple? I'm unable to spot what I've done wrong so far.. Thanks

  Read the article

• Geolocation Firefox accurate than iPhone Safari?

  - by johnz

  I just tested Geolocation on Firefox 3.6 and iPhone Safari (os 3.1.3), the result is interesting, firefox is more accurate than safari. any one got idea how to make iPhone Safari result more accurate. this is the code for testing: navigator.geolocation.getCurrentPosition(handler, {enableHighAccuracy: true}); function handler(location) { var message = document.getElementById("message"); message.innerHTML = "<img src='http://maps.google.com/staticmap?sensor=true&center=" + location.coords.latitude + "," + location.coords.longitude + "&size=300x300&maptype=street&zoom=16&key=ABQIAAAAZrVtlT2df2pkfI_RZB_6WBRWTAkRKJS7h1XjKaOTqACHuw1n0BT5cATkkKFnZNGHmrwUw9IilQK0Eg' />"; message.innerHTML+="<p>Longitude: " + location.coords.longitude + "</p>"; message.innerHTML+="<p>Latitude: " + location.coords.latitude + "</p>"; message.innerHTML += "<p>Accuracy: " + location.coords.accuracy + "</p>"; // call the function with my current lat/lon getPlaceFromFlickr(location.coords.latitude, location.coords.longitude, 'output'); } . . test from here

  Read the article

• iPhone: CATiledLayer/UIScrollView wont scroll after zooming and only zooms to anchor point

  - by Brodie4598

  Here is the problem... I am using CA Tiled Layer to display a large jpg. The view loads okay, and when I go to scroll around, it works fine. However, as soon as I zoom in or out once, it scrolls to the top left (to the anchor point) and will not scroll at all. The zooming works fine, but I just cannot scroll. Here is my code: #import <QuartzCore/QuartzCore.h> #import "PracticeViewController.h" @implementation practiceViewController //@synthesize image; - (void)viewDidLoad { NSString *path = [[NSBundle mainBundle] pathForResource:@"H-5" ofType:@"jpg"]; NSData *data = [NSData dataWithContentsOfFile:path]; image = [UIImage imageWithData:data]; CGRect pageRect = CGRectMake(0, 0, image.size.width, image.size.height); CATiledLayer *tiledLayer = [CATiledLayer layer]; tiledLayer.anchorPoint = CGPointMake(0.0f, 1.0f); tiledLayer.delegate = self; tiledLayer.tileSize = CGSizeMake(1000, 1000); tiledLayer.levelsOfDetail = 6; tiledLayer.levelsOfDetailBias = 0; tiledLayer.bounds = pageRect; tiledLayer.transform = CATransform3DMakeScale(1.0f, -1.0f, 0.3f); myContentView = [[UIView alloc] initWithFrame:self.view.bounds]; [myContentView.layer addSublayer:tiledLayer]; UIScrollView *scrollView = [[UIScrollView alloc] initWithFrame:self.view.bounds]; scrollView.delegate = self; scrollView.contentSize = pageRect.size; scrollView.minimumZoomScale = .2; scrollView.maximumZoomScale = 1; [scrollView addSubview:myContentView]; [self.view addSubview:scrollView]; } - (UIView *)viewForZoomingInScrollView:(UIScrollView *)scrollView { return myContentView; } - (void)drawLayer:(CALayer *)layer inContext:(CGContextRef)ctx { NSString *path = [[NSBundle mainBundle] pathForResource:@"H-5" ofType:@"jpg"]; NSData *data = [NSData dataWithContentsOfFile:path]; image = [UIImage imageWithData:data]; CGRect imageRect = CGRectMake (0.0, 0.0, image.size.width, image.size.height); CGContextDrawImage (ctx, imageRect, [image CGImage]); } @end

  Read the article

• IE7 CSS bug aligning <img> with text in a <ul>

  - by Artem Russakovskii

  I've been banging my ahead on this IE7 bug for the last few days and it's time to resort to the mind of the crowd. I have the following HTML and CSS: http://beerpla.net/for_www/ie7_test/test.html The goal is to have a <ul>, with each <li> containing a small icon and some text. Multiline text would be aligned to itself and not wrap under the image. I've tried using float:left on the image and a bunch of other things, and finally I thought the position:absolute would work for sure but in IE7 I consistently see the text pop off to the next line and get misaligned with the image: This is what I expect it to look like: I even tried to make the div display:inline which kind of worked but then started wrapping under the image for long lines, so it was no good. zoom:1 also produced a similar effect. I'm at a loss at the moment. This code works fine in all other browsers. IE7 is a special, very special child. Any ideas? Thank you. Edit: If you have IE8, you can emulate IE7 by pressing F12 and then Alt-7.

  Read the article

• basic javascript question on geolocation and googlemaps

  - by ade

  hello all, Im hoping that somebody can help me out on what i feel is an easy answer but I just cant get it to work out. Im trying to trap the geolocation lat and long and place it into the google maps api so far i have var myOptions = { zoom:7, trips:1, mapTypeId: google.maps.MapTypeId.ROADMAP } var map = new google.maps.Map(document.getElementById("map"), myOptions); directionsDisplay.setMap(map); var request = { origin: 'newyork' destination: 'deleware', travelMode: google.maps.DirectionsTravelMode.DRIVING }; this works fine for what i want. how ever I want to be able to change Origin to the users lat long using the following script from google.maps.api. their code is: if(navigator.geolocation) { navigator.geolocation.getCurrentPosition(function(position) { initialLocation = new google.maps.LatLng(position.coords.latitude,position.coords.longitude); var placeMarker = new google.maps.Marker({ position: initialLocation, map: map, }); map.setCenter(initialLocation); }, function() { handleNoGeolocation(browserSupportFlag); }); } else { // Browser doesn't support Geolocation handleNoGeolocation(); } function handleNoGeolocation() { initialLocation = newyork; map.setCenter(initialLocation); } I want to pull out the navigator.geolocation.getCurrentPosition(function(position) { initialLocation = new google.maps.LatLng(position.coords.latitude,position.coords.longitude); and allocate it two 2 varibles, myLat and myLong. I then want to be able to change my orignal script from var request = { origin: 'newyork' destination: 'deleware', travelMode: google.maps.DirectionsTravelMode.DRIVING }; to var request = { origin: myLat,myLong destination: 'deleware', travelMode: google.maps.DirectionsTravelMode.DRIVING }; Does this make sense..? Im currently having a pig with it and as im not a JS developer its what i think should be a simple bit of coding that im losing the battle with.. any thoughts..?

  Read the article

• JSP Googlemaps taglib not found, where have I gone wrong?

  - by James.Elsey

  I'm trying to add Google Maps onto my JSPs by using the Googlemaps taglib. I've added this into my maven pom <dependency> <groupId>com.lamatek</groupId> <artifactId>googlemaps</artifactId> <version>0.98c</version> <scope>provided<>/scope </dependency> This then included the googlemaps-0.98c library under my project libraries in NetBeans, I right clicked and selected Manually install artifact and located the googlemaps.jar file I had downloaded. I've then added this into my taglibs file <%@taglib prefix="googlemaps" uri="/WEB-INF/googlemaps" %> And have then included this where I actually want to show a map on my jsp <googlemaps:map id="map" width="250" height="300" version="2" type="STREET" zoom="12"> <googlemaps:key domain="localhost" key="xxxx"/> <googlemaps:point id="point1" address="74 Connors Lane" city="Elkton" state="MD" zipcode="21921" country="US"/> <googlemaps:marker id="marker1" point="point1"/> </googlemaps:map> But when I load up my application, I get the following error. org.apache.jasper.JasperException: /jsp/dashboard.jsp(1,1) /jsp/common/taglibs.jsp(6,56) PWC6117: File "/WEB-INF/googlemaps" not found root cause org.apache.jasper.JasperException: /jsp/common/taglibs.jsp(6,56) PWC6117: File "/WEB-INF/googlemaps" not found Have I missed something simple? I'm unable to spot what I've done wrong so far..

  Read the article

• CATiledLayer blanking tiles before drawing contents

  - by Greg Plesur

  All, I'm having trouble getting behavior that I want from CATiledLayer. Is there a way that I can trigger the tiles to redraw without having the side-effect that their areas are cleared to white first? I've already subclassed CATiledLayer to set fadeDuration to return 0. To be more specific, here are the details of what I'm seeing and what I'm trying to achieve: I have a UIScrollView with a big content size...~12000x800. Its content view is a UIView backed by a CATiledLayer. The UIView is rendered with a lot of custom-drawn lines Everything works fine, but the contents of the UIView sometimes change. When that happens, I'd like to redraw the tiles as seamlessly as possible. When I use setNeedsDisplay on the view, the tiles redraw but they are first cleared to white and there's a fraction-of-a-second delay before the new content is drawn. I've already subclassed CATiledLayer so that fadeDuration is set to 0. The behavior that I want seems like it should be possible...when you zoom in on the scrollview and the content gets redrawn at a higher resolution, there's no blanking before the redraw; the new content is drawn right on top of the old one. That's what I'm looking for. Thanks; I appreciate your ideas. Update: Just to follow up - I realized that the tiles weren't being cleared to white before the redraw, they're being taken out entirely; the white that I was seeing is the color of the view that's beneath my CATiledLayer-backed view. As a quick hack/fix, I put a UIImageView beneath the UIScrollView, and before triggering a redraw of the CATiledLayer-backed view I render its visible section into the UIImageView and let it show. This smooths out the redraw significantly. If anyone has a better solution, like keeping the redraw-targeted tiles from going away before being redrawn in the first place, I'd still love to hear it.

  Read the article

• Best way to pan & scan images with jquery

  - by guy

  Hello, I am trying to make an image pan & scan system. I have a slider that zooms the image (that can be dragged) and also a small map in the corner of the image (that can also be dragged). You can see a rough example here (sorry, I am not allowed to use the design, so it's not formatted): http://lighe.madetokill.com/test/test.html My problem is that although it works great in firefox and opera, it stutters in chrome, safari and IE (it doesn't currently work in IE) at any zoom level except 100% (at 100% it's butter smooth). What is the reason for webkit's poor performance? Am I implementing this wrong? I am basically changing the margin-left and margin-top properties of the image. I know this is fast enough since at 100% it's perfectly smooth. Would I be better off using canvas? I am trying to avoid flash (or any other plugins) if possible. Also please note this is work in progress, there are other bugs except this, so do not bother with those :) Thanks in advance!

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >