Search Results

Search found 15665 results on 627 pages for 'inno setup'.

Page 470/627 | < Previous Page | 466 467 468 469 470 471 472 473 474 475 476 477  | Next Page >

• Very poor SCSI hd performance on IBM x336 with LSI 1030 RAID1

  - by David Tschoepe

  I'm experiencing very poor performance on an IBM x336 server with dual 73GB 15k hard drives on a U320 controller, LSI 1030. We're getting maybe 3.5MB/sec max (per HD Tune utility). It should be over 100MB/sec at least, I would think (another x335 box is running 70-80MB/sec). The server was recently setup and didn't really notice the problem, but may have been there from the beginning, so not sure. I have installed the IBM ServerRAID Windows utility. The server is running Windows 2008 R2 Web edition (if that matters). I thought maybe one of the drives was bad, so far I have removed one of the drives out of the array and tested again, but still the same results. I'm waiting for the RAID1 to resync and I will try pulling the other drive next. I've also used the ServerRAID utility but haven't noticed anything in there that might indicate a problem. Not sure if I'm on the right path here. So looking for some advice to track this down.

  Read the article

• Computer won't boot from a bootable DVD

  - by JohnB

  My friend gave me his old computer that used to have WinXP on it. I'm trying to load Win7 on it and I thought there was something wrong because it wouldn't boot off a bootable disc, even though I setup the BIOS boot settings properly (I've done this sort of thing a million times). However, this closely related post helped me realize that I can boot off a bootable CD (WinXP), just not a DVD (Win7) Computer won’t boot from CD/DVD drive That might be the answer to my question, however, this motherboard is still pretty current technology. It's a good quality Gigabyte board, and judging from this product page, it came out in 2004. If I can't figure out a solution to my DVD boot problem, I'll have to try something like this: Boot and Install Windows from a USB thumb drive I guess it's possible that this motherboard doesn't allow booting from a DVD, but I still think that I might be missing something. It wouldn't be the DVD rom drive would it? I did try another drive and had the same results. However, I didn't try booting a DVD in the computer that the other test drive came out of, I'll do that later today. Any other advice? Thanks.

  Read the article

• Need to get SMTP server on MS Server 2003

  - by Matt Dawdy

  Long story short, client paid networking company to move their website in house. Now I have to figure out how to email out from their website even though they don't have an SMTP server. At least until I install one. Their email is hosted with Gmail right now (the client's domain through Google App for Your Domain). I changed my code to connect as one of their users "[email protected]" and send email. Worked great for about 12 hours. All of a sudden none of the automated emails are going out now, and google is sending the emails back saying that it is a permanent failure and Message Rejected. The link they direct me to, http://mail.google.com/support/bin/answer.py?answer=69585 is telling me that our emails look like spam. They aren't. They are emails we send to out clients about the status of their applications. Seriously, they are NOT spam. So...long story short is out the window, sorry...but I need to get an SMTP server setup inside their domain that I can send emails out of. This thing won't need to receive emails ever, and really only needs 1 email account customercare. What can I do? Will I have to have the networking company open a port in the firewall? Is there one built into Server 2003?

  Read the article

• Help setting up a secondary authoritative DNS server.

  - by GLB03

  We have three Authoritative DNS servers and three recursive/caching DNS servers on my campus. Authoritative servers DNS1- Windows 2003 DNS2- Old Red Hat ----- Replacing w/ newer version DNS3- Windows 2008 (I installed) Caching and Recursive resolvers servers Server1- Windows 2003 Server2- CentOS 5.2 (I installed) Server3- CentOS 5.3 (I installed) I am replacing DNS2 with a newer Red Hat version, but have no documentation on how it was implemented. I have setup caching and windows authoritative servers, but not a linux secondary authoritative server. I have a perl script from the original server that pulls data from our DNS1 server. We use DJBDNS and TinyDNS on our linux servers. Our Network Engineer says the DNS2 server I am replacing is an authoritative server that doesn't need to be caching, but the only instructions I see is for an Authoritative server that does caching as well. Can someone point me in the right directions. I thought I was on the right track with using these instructions but when I query my new dns server I get "No response from server", I have temporarily disabled iptables to eliminate it from being an issue. ps -aux | grep dns avahi 3493 0.0 0.2 2600 1272 ? Ss Apr24 0:05 avahi-daemon: running [newdns2.local] root 5254 0.0 0.1 3920 680 pts/0 R+ 09:56 0:00 grep dns root 6451 0.0 0.0 1528 308 ? S Apr29 0:00 supervise tinydns dnslog 6454 0.0 0.0 1540 308 ? S Apr29 0:00 multilog t ./main tinydns 9269 0.0 0.0 1652 308 ? S Apr29 0:00 /usr/local/bin/tinydns

  Read the article

• Can't connect to public WiFi with MacBookPro at coffee shops and libraries

  - by Nathan Bowers

  The Problem: I can't connect to public, unencrypted WiFi at my local public library or Peets Coffee. My Setup: Late 2006 MacBookPro running 10.5.8. I have Parallels installed. It's supposed to work like this: 1) Connect to their unencrypted WiFi network 2) Open a browser which redirects you to their "enter password/agree to terms" page. 3) Browse normally. I can connect to the WiFi network, but when I try to authenticate I always get stuck in a redirect loop. It's been like this for a while. Even before I upgraded to 10.5.8. I never have trouble with encrypted networks or regular open WiFi. What I've tried: Disabling Parallels connections in Network Prefs. Superstition: somehow Parallels installed something in the network stack that's messing me up. Pinging the IP address of the WiFi node I'm connected to. I can ping it, it's there, but I still get stuck in this authentication redirect loop. Tried different browsers, tried different cookie and security settings. Even tried IE under Parallels. No dice. Tried flushing DNS cache. Asked library and coffee employees for help. It didn't go well. My Question: Anybody else have this problem? What should I be looking for?

  Read the article

• Problems with LDAP auth in Apache, works only for one group

  - by tore-

  Hi, I'm currently publishing some subversions repos within Apache: <Location /dev/> DAV svn SVNPath /opt/svn/repos/dev/ AuthType Basic AuthName "Subversion repo authentication" AuthBasicProvider ldap AuthzLDAPAuthoritative On AuthLDAPBindDN "CN=readonlyaccount,OU=Objects,DC=invalid,DC=now" AuthLDAPBindPassword readonlyaccountspassword AuthLDAPURL "ldap://invalid.domain:389/OU=Objects,DC=invalid,DC=domain?sAMAccountName?sub?(objectClass=*)" Require ldap-group cn=dev,ou=SVN,DC=invalid,DC=domain </Location> This setup works great, but now we want to give an LDAP group read only access to our repo, then my apache config looks like this: <Location /dev/> DAV svn SVNPath /opt/svn/repos/dev/ AuthType Basic AuthName "Subversion repo authentication" AuthBasicProvider ldap AuthzLDAPAuthoritative On AuthLDAPBindDN "CN=readonlyaccount,OU=Objects,DC=invalid,DC=now" AuthLDAPBindPassword readonlyaccountspassword AuthLDAPURL "ldap://invalid.domain:389/OU=Objects,DC=invalid,DC=domain?sAMAccountName?sub?(objectClass=*)" <Limit OPTIONS PROPFIND GET REPORT> Require ldap-group cn=dev-ro,ou=SVN,dc=invalid,dc=domain </Limit> <LimitExcept OPTIONS PROPFIND GET REPORT> Require ldap-group cn=dev-rw,ou=SVN,dc=invalid,dc=domain </LimitExcept> </Location> All of my user accounts is under: OU=Objects,DC=invalid,DC=domain All groups related to subversion is under: ou=SVN,dc=invalid,dc=domain The problem after modification, only users in the dev-ro LDAP group is able to authenticate. I know that authentication with LDAP works, since my apache logs show my usernames: 10.1.1.126 - tore [...] "GET /dev/ HTTP/1.1" 200 339 "-" "Mozilla/5.0 (...)" 10.1.1.126 - - [...] "GET /dev/ HTTP/1.1" 401 501 "-" "Mozilla/4.0 (...)" 10.1.1.126 - readonly [...] "GET /dev/ HTTP/1.1" 401 501 "-" "Mozilla/4.0 (...) line = user in group dev-rw, 2. line is unauthenticated user, 3. line is unauthenticated user, authenticated as a user in group dev-ro So I think I've messed up my apache config. Advise?

  Read the article

• cPanel web servers mounting home partition to a NAS or SAN

  - by Scott

  I currently have 2 cPanel web servers that are little 1RU dual cpu quad core xeons. They have a lot of resources for processing and handling web requests, and never exceed more than 10% cpu usage. They also have plenty of RAM. The problem is though that they both have RAID 1 160Gb SAS hard disk drives in them that are 75% full, and growing by the day. I didnt think that the amount of disk usage would be so high, but due to the nature of the sites hosted, this has become an issue. The easy fix would be just to upgrade the hard drives to something bigger (probably not of the SAS variety), but I am thinking of keeping the current machines as "processing servers" and buying a central "storage server" with about 12TB of storage. The /home/ partition on each of the 1RU servers would be mounted to a NAS or SAN point on this central storage server. My questions are: - Has anyone got a cPanel setup where they mount /home/ to a NAS or SAN elsewhere? If so, can you provide details as to what you did and how it went :) - Any recommendations on networking? Is gigabit ethernet enough? Is TCP/IP going to be a noticable performance problem? Anyone used a TOE key? - Anyone benchmarked or had any performance issues with SAN over NAS? Any help greatly appreciated. Scott

  Read the article

• OSX Server 10.5 - Cannot log into Workgroup Manager - diradmin password is correct

  - by Mister IT Guru

  I've got a setup where I am trying to rescue a broken AD. We can no longer authenticate on the Workgroup manager, with passwords being rejected all the time - even though it is correct. I can connect using the workgroup manager on another server and I get the user list as expected, but when I click the padlock to make changes, I get the following screen: The problem is, I know the password is correct, I just used it to connect to the server in the first place. I can log into the server using the local admin, and services such as AFP, VPN and SMB continue to serve users. I have about 300 or so users on this server, and I would very much like to avoid having a rebuild. As there is much configuration that has been done without my knowledge (it's a client machine), I'd like to attempt to fix it, and then create another server and migration OD off this broken machine, then decommission it "gently". Ultimately this would mean no disruption of services. What I'd like it some tips as to how to fix the problem with authenticating to make changes in the work group manager, and maintenance on open directory in general. Thanks

  Read the article

• Can you share offline files cache with two user accounts?

  - by Joel Coehoorn

  I have a new laptop that I use for both home and work. It runs windows 7 ultimate, and is joined to the domain at work. It is okay to use this laptop for both work and personal activities, and I even have an account set up on the local machine in addition to the work domain account specifically for this to help keep the two separate. At home, I have a file server that I use to share files and printers with my wife's laptop, this new laptop, and my old desktop which will now become the family machine. My mp3 library is on there, among other things. What I want to do is use the windows Offline Files feature to keep a synced copy of my music library on the laptop. That part is easy. What's tricky is that I want to share this offline cache between both the local account on the laptop and my work domain account. I could do them both separately, but then I have two copies of a very large music library stored locally. This also means twice the sync burden, when the domain account is rarely connected to the file share. I really want to be able to sync from the local machine account only, and have the domain account be able to use the synced files. I know where the offline file cache is kept (\Windows\CSC) and I can find the cached files (not encrypted), but permissions on the cache are setup weird, and so using that cache directly is not trivial. Any ideas appreciated.

  Read the article

• Outlook 2007 will not send/receive using RPC over HTTP to an exchange server.. works for other users

  - by bob franklin smith harriet

  I have an incredibly frustrating user issue that I have been unable to resolve for over a week, any ideas for this would be greatly appreciated. The user is having troubles using Outlook 2007 to send or receive emails over using RPC over HTTP (Outlook Anywhere) to an exchange server. Basically what happens, the connection will be establised and the user will be prompted for the username and password, those are submitted and then outlook tries to download emails which fails and the connection to the exchange server will remain unavailable. The machine can ping and everything to the exchange server there is no connection issue there. The setup worked fine for him up untill now and also works for possibly hundreds of other users using the exact same settings, also the same settings will work from the users iphone on the same internet connection, and from my own system using outlook. The exchange server has the webmail https feature and that can be logged into and send and receive emails fine. Steps taken so far: removing the .ost file for the account and allowing office to rebuild it (fixes the issue for a short period of time, then the same symptons occur) deleted exchange profile and recreated (no change in issue) uninstalled all antivirus and firewalls (no change in issue) removed all cached passwords (keymgr.dll) (no change in issue) removed all entries from the hosts file (no change in issue) uninstalled and reinstalled office 2007 (Temporary fix of issue) Installing Symantec Endpoint Client caused a lot of email scan popups to be displayed, after a reboot this stopped and a scan it picked a few trojans that it removed. This fixed the issue temporarily as well, the issue is back again now. I am completely out of ideas now, there seems to be nothing that can be done to fix this issue outside of rebuilding the PC which is a massive pandoras box I don't want to enter with this user. --- Update ---- Malware scans from multiple products have been run on the machine and all updates were installed. The real problem with this user is his distance from us, there is no way to supply a spare laptop or rebuild the machine currently.

  Read the article

• 554 5.7.1 <mail_addr>: Relay access denied centos postfix

  - by Relicset

  I have problem in send mail from postfix in centos I have following setup mail server postfix for sending mail but I am getting error. As in the link I tried following commands telnet localhost smtp Trying ::1... Connected to localhost. Escape character is '^]'. 220 mydomain.com ESMTP Postfix ehlo localhost 250-mydomain.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN mail from:<domain.com> 250 2.1.0 Ok rcpt to:<[email protected]> 554 5.7.1 <[email protected]>: Relay access denied Edit-1 In terminal this works echo TEST | mail -v -s "Test mail" [email protected] my postconf -n shows belog information alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 home_mailbox = Maildir/ html_directory = no inet_interfaces = localhost inet_protocols = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = dummy.com myhostname = dummy.com mynetworks = all mynetworks_style = host myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop unknown_local_recipient_reject_code = 550 What configuration I have to perform to send mails from my server.

  Read the article

• Deploying workstations - best practices?

  - by V. Romanov

  Hi guys I've been researching on the subject of workstation deployment for a while, and found a ton of info and dozens different methods and tools, but no "best practice" method that doesn't lack at least one feature that i consider required for the solution to be perfect. I'm currently interested in windows workstation deployment, but if the tools can be extended to Linux, then it's an added value. I want the deployment tools I use to be able to do the following: hardware independent - I want my image or installation to have a minimum of hardware and driver dependency, so that i can use a single image/package for all workstations easily updatable - I want to be able to update my image as easily as possible without redeploying/rebuilding/reimaging all configurations PXE bootable deployment - I want the tools to be bootable off the network so that I don't need a boot cd/DOK. scriptable for minimum human input - Ideally, the tool should run automatically after being booted and perform a "default" deployment (including partitioning) unless prompted otherwise. i.e - take a pc, hook it up, power on, PXE boot and forget about it until the OS is deployed. I found no single product or environment that does all this. Closest i came to is the windows deployment services/WIM image format. I also checked out numerous imaging and deployment tools including clonezilla, ghost, g4u, wpkg and others, but most of them lack the hardware Independence and updatability features. We currently have a Symantec Ghost server setup that does imaging over the network, but I'm not satisfied with it as it has all the drawbacks i listed above. Do you have suggestions how to optimize the process of workstation deployment? How do you deploy them in your organization? Thanks! Vadim.

  Read the article

• Linux Sound Drivers - Recompiling kernel with ehcd-hcd module

  - by jhome

  I just installed Linux Mint and I am trying to get my usb soundcard to work. I am completely new to Linux so I have only been learning about all the important parts of the OS this afternoon. No one I know has compiled kernel so I can't ask anyone. I am following instructions on this site: http://wiki.ubuntuusers.de/Benutzer/BigMc#Final-setup-of-US-122L-US-144 "Recompile your Kernel with ehcd-hcd as a module: Instructions for Ubuntu (german) Change "Device Drivers - USB support - EHCI HCD (USB 2.0) support)" to "M" when configuring. Make sure you also install the kernel headers." I know how to do any of these processes. Someone mentioned a package manager. Is recompiling basically in layman's terms reinstallation? Where do I go to the change device drivers? Cheers Edit: I am attempting to be able to use my Tascam US-144 on Linux Mint. Apparently, to use it properly it has to regress to functionality of a former unit (US-122), so according to the instructions a USB port has to be USB 1.0, rather than USB 2.0. I've tried using that ndis** programme for wireless drivers but with no success.

  Read the article

• Webserver optimization

  - by f-aminov

  Hi guys! I have a website hosted on a VPS (512Mb - minimum guranteed memory, 510Mhz proccessor, Debian 5.0 Lenny, Apache 2.2.9 with nginx 0.7.65 as a frontend to serve static content, MySQL 5.1.44, PHP 5.3.2 with APC caching). I'm a web developer, so I'm not very good at optimizing servers, but I've managed to install and setup all those neccessary components (LAMP, nginx, etc.). After that I decided to stress test my website (which uses Drupal 6.16 with caching and all possible optimization enabled) using a utility called "Webserver Stress Tool 7". And it seems to me that the results aren't any good - here is a graph (sorry, as a new user I'm not allowed to post images) As you can see the response time depending on amount of simultaneous users increases very quickly. With 10 simultaneous users the time is about 1000ms, with 100 simultaneous users it's about 15000ms (15s!). The question is do you think this is normal behavior for such a server or something is wrong with the settings and optimization? If you think something is wrong what particulary could be wrong? Any other suggestion how to speed this a little bit up?

  Read the article

• copying folder and file permissions from one user to another after switching domains [closed]

  - by emptyspaces

  Please excuse the title, this was the best way I could think to describe this scenario without an entire paragraph. I am using C#. Currently I have a file server running windows server 2003 setup on a domain, we will call this oldDomain, and I have about 500 user accounts with various permissions on this server. Because of restrictions out of my control we are abandoning this domain and using another one that is more dominant within the organization, we will call this newDomain. All of the users that have accounts on oldDomain also have accounts on newDomain, but the usernames are completely different and there is no link between the two. What I am hoping to do is generate a list of all user accounts and this appropriate sid's from AD on the oldDomain, I already have this part done using dsquery and dsget. Then I will have someone go through and match all of the accounts from oldDomain to the correct username on newDomain. Ultimately leaving me with a list of sids from oldDomain and the appropriate username from newDomain. Now I am hoping to copy the file and folder permissions from the old user from oldDomain to the new user on newDomain once I join the server to newDomain. Can anyone tell me what the best way to copy permissions from the sid to the user on newDomain? There are a bunch of articles out there about copying permissions from user a to user b but I wanted to check and see what the recommended practice is here since there are a ton of directories.

  Read the article

• Cannot send email outside of network using Postfix

  - by infmz

  I've set up an Ubuntu server with Request Tracker following this guide (the section about inbound mail would be relevant). However, while I'm able to send mail to other users within the network/domain, I cannot seem to reach beyond - such as my personal accounts etc. Now I have no idea what is causing this, I thought that all it takes is for the system to fetch mail through our exchange server and be able to deliver in the same way. However, that hasn't been the case. I have found another server setup in a similar fashion (CentOS 5, Request Tracker but using Sendmail), however it is a dated server and whoever's built it has kindly left no documentation on how it works, making it a pain to use that as a reference system! :) At one point, I was told I need to set up a relay between the local server's email add and our AD server but this didn't seem to work. Sorry, I know next to nothing about mailservers, my colleagues nothing about Linux so it's a hard one for me. Thank you! EDIT: Result of postconf -N with details masked =) alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 mydestination = myhost.mydomain.com, localhost.mydomain.com, , localhost myhostname = myhost.mydomain.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = EXCHANGE IP smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes Sample log message: Sep 4 12:32:05 theedgesupport postfix/smtp[9152]: 2147B200B99: to=<[email protected]>, relay= RELAY IP :25, delay=0.1, delays=0.05/0/0/0.04, dsn=5.7.1, status=bounced (host HOST IP said: 550 5.7.1 Unable to relay for [email protected] (in reply to RCPT TO command))

  Read the article

• Diverting sound output of MCE to SPDIF

  - by Saxtus

  I have an ASUS SupremeFX II audio card (which in fact is an onboard audio riser slot) with the default drivers that are pre-installed by Windows 7 x64 for this card. I am able to manually switch between analog output and SPDIF output by the means of control panel (or external utilities like STADS), a change that affects all applications. The problem is that by doing that every time I am about to launch Windows Media Center, except that it's not that elegant, also makes all other Windows application's sounds to pass through SPDIF too, bypassing analog output completely, blending with what I am watching at Windows Media Center. Is there a way to make SPDIF as the default playback device for Windows Media Center? I know other programs that have a setting like that (foobar2000 for example) working like charm, allowing me to even have different outputs working at the same time (tested with my current card successfully). But when comes to Windows Media Center... it just use what the default playback device is all the time. The only setting that I know of, is under: Settings General Windows Media Center Setup Set Up Your Speakers and what it does is to just change the default playback device for entire system. Please help!

  Read the article

• Debian network bridge configuration - /etc/network/interfaces

  - by Mathias

  I'm running a Lenny Xen dom0 hosting multiple virtual machines in a routed IP setup. To get an additional private subnet, I created the bridge xenbr0 in the dom0 with the following commands: brctl addbr xenbr0 ifconfig xenbr0 10.0.0.1 netmask 255.255.255.0 ifconfig xenbr0 up This works as expected, and domU interfaces are added to the bridge by Xen on VM start. My only problem is: how the heck do i specify this configuration in /etc/network/interfaces that it remains permanent and the bridge is available after a reboot? I tried the following config as found on a lot of tutorials: auto xenbr0 iface xenbr0 inet static address 10.0.0.1 netmask 255.255.255.0 network 10.0.0.0 broadcast 10.0.0.255 bridge_stp no I get 2 different errors, depending on if the bridge already exists or not. If it doesn't exist: root@dom0:~# brctl show bridge name bridge id STP enabled interfaces root@dom0:~# /etc/init.d/networking restart Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: waiting for interface xenbr0 before doing NFS mounts (warning). SIOCSIFADDR: No such device xenbr0: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device xenbr0: ERROR while getting interface flags: No such device xenbr0: ERROR while getting interface flags: No such device Failed to bring up xenbr0. done. And if it exists: root@dom0:~# brctl show bridge name bridge id STP enabled interfaces xenbr0 8000.000000000000 no root@dom0:~# /etc/init.d/networking restart Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: waiting for interface xenbr0 before doing NFS mounts (warning). RTNETLINK answers: File exists Failed to bring up xenbr0. done. Could anyone point me in the right direction please? The bridge works fine when created manually, i just need the right config file entries. The most tutorials I found add some devices to the bridge in the config, is that maybe the problem why it is not working? I don't have any interfaces I want to add to the bridge on creation as they get added later on VM start... Thanks, Mathias

  Read the article

• Why is the link between my switch and my router always negotiating half-duplex mode?

  - by Massimo

  I have a Cisco 2950 switch which has one of its ports connected to an Internet router provided by my ISP; I have no access to the router configuration, but I manage the switch. If I leave all switch ports with their default setup (auto-negotiation of speed and duplex mode), this link always connects at 100 MBit/s, but in half-duplex mode. I've tried replacing the cable, and also moving the link to another switch port: the result is always the same. A different device connected to the same port (or to any switch port, really) shows no problem at all. It could be guesed that someone configured the router to only connect in half-duplex mode... BUT, here's the catch: if I manually force the switch port to full-duplex mode (duplex full in the interface configuration), the link goes up, stays up and is completely stable. So: The connection is not forced to half-duplex mode by the router, otherwise it would not connect at all if I force the switch end to full-duplex. There is no actual link problem, otherwise the full-duplex connection would not go up or would at least show some errors. But if I leave the port free to auto-negotiate, it always connects in half-duplex mode. Why?

  Read the article

• Synergy, OSX client, Windows 7 server - No mouse on client

  - by Majenko

  I have the following Synergy setup: +------------++------------++------------++------------+ | Mac || Win 7 || Ubuntu 1 || Ubuntu 2 | |c ||s ||c ||c | +------------++------------++------------++------------+ Mac: OS/X Tiger 10.4.11 (G3) Win 7: Windows 7 Ultimate x64 Ubuntu 1 & Ubuntu 2: Desktop 10.10 Now, everything works nicely between the Win7 server and the two Ubuntu machines. What doesn't work is the Mac. I am running the very latest Synergy (1.4.2, downloaded last night). As far as the Mac is concerned everything should be working fine: Synergy 1.4.2 Client on Darwin 8.11.0 Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC Power Macintosh Unable to connect to pasteboard. Clipboard sharing disabled. 2011-03-22 09:32:56.725 synergyc[406] Can't register screen saver connection 'com.apple.ScreenSaverDaemon' started client connecting to '192.168.0.202': 192.168.0.202:24800 connected to server entering screen leaving screen entering screen leaving screen But it's just not interacting with the display at all (mouse doesn't move, keyboard does nothing). I have tried running ktrace on synergyc and examining the dump, and the only clue I found was that it was trying to interact with the AccessibilityAPI which was disabled at first. Enabling Accessibility has had no effect whatsoever (it has only stopped the failure to open /var/db/.AccessibilityAPIEnabled in the ktrace dump) Anyone managed to get this to work in OS/X Tiger yet? I used to run the server on OS/X and have the windows / unix machines as clients, but as my Windows is now a laptop I'd like that to be the server.

  Read the article

• Can't do more than one activity at a time after switching modems

  - by vallorn

  I had to replace the Motorola 2210 DSL modem that I got when I signed up for AT&T DSL Direct a few years ago. The modem kept randomly restarting and it eventually gave out on me. I am assuming overheating was the cause here because it was almost too hot to touch. In any case, I replaced it with a Netgear DM111PSP. It works fine but I can't do more than one activity at a time with it. If my wife is watching Netflix, there is a noticeable delay/latency when trying to view web sites. It's even worse if I try to play an on-line game while she's streaming; the game is basically unplayable. The odd thing is, the only other activity I can do while she's streaming is stream another Netflix show myself. There is no delay when doing that, no buffering either. I'm not a networking guy so maybe there is an explanation for it but I find that kind of odd. I've tried using QoS through my Buffalo N600 wireless router and it doesn't seem to help. With the old Motorola modem, she could be watching Netflix while I play a game and everything worked just fine. Is there anything I can check or reconfigure possibly on the modem that would account for this? Should I just ditch the Netgear and get another modem instead? I have the Netgear modem connected to the Buffalo router in a bridged mode. Its the same exact setup as I had with the Motorola and as far as I can tell, it's not the router that is the cause.

  Read the article

• IIS 7.5 error 500 in fastcgi module after upgrading wordpress to 3.0.2

  - by Maniac13

  I am running multiple wordpress blogs on the following setup: Server 2008 R2; IIS 7.5; PHP 5.3.3; MySQL 5.0.7; I upgraded my wordpress install from 2.9.2 to 3.0.2 (on 2 different sites) today and the upgrade went fine. I can serve .php pages without errors, log into the admin system etc. I can browse my blog by going directly to mywebsite.com/index.php, but when I try to go to mywebsite.com (without the index.php) I get he below 500 error. I reset IIS, removed and re-attached the default document, but I am running out of ideas. Please if anyone has a solution for this that would be great. This is the 500 error I am getting: Error Summary HTTP Error 500.0 - Internal Server Error The page cannot be displayed because an internal server error has occurred. Detailed Error Information Module FastCgiModule Notification ExecuteRequestHandler Handler PHP FastCGI Error Code 0x00000000 Requested URL http://mywebsite.com:80/index.php Physical Path D:\mywebsite.com\index.php Logon Method Anonymous Logon User Anonymous Thanks Stephan

  Read the article

• Error in Bind9 named.conf file. Bind won't start.

  - by tj111

  I'm trying to setup a DNS server on an Ubuntu Server machine (10.04). I configured an entry in named.conf.local to test it, but when trying to restart bind9 I get the following error: * Starting domain name service... bind9 [fail] So I checked the output of syslog and this is what I get. May 20 18:11:13 empression-server1 named[4700]: starting BIND 9.7.0-P1 -u bind May 20 18:11:13 empression-server1 named[4700]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc/bind' '--localstatedir=/var' '--enable-threads' '--enable-largefile' '--with-libtool' '--enable-shared' '--enable-static' '--with-openssl=/usr' '--with-gssapi=/usr' '--with-gnu-ld' '--with-dlz-postgres=no' '--with-dlz-mysql=no' '--with-dlz-bdb=yes' '--with-dlz-filesystem=yes' '--with-dlz-ldap=yes' '--with-dlz-stub=yes' '--with-geoip=/usr' '--enable-ipv6' 'CFLAGS=-fno-strict-aliasing -DDIG_SIGCHASE -O2' 'LDFLAGS=-Wl,-Bsymbolic-functions' 'CPPFLAGS=' May 20 18:11:13 empression-server1 named[4700]: adjusted limit on open files from 1024 to 1048576 May 20 18:11:13 empression-server1 named[4700]: found 4 CPUs, using 4 worker threads May 20 18:11:13 empression-server1 named[4700]: using up to 4096 sockets May 20 18:11:13 empression-server1 named[4700]: loading configuration from '/etc/bind/named.conf' May 20 18:11:13 empression-server1 named[4700]: /etc/bind/named.conf:10: missing ';' before 'include' May 20 18:11:13 empression-server1 named[4700]: loading configuration: failure May 20 18:11:13 empression-server1 named[4700]: exiting (due to fatal error) So it thinks I have an error in the default named.conf file, which is pretty ridiculous. I went through it and deleted a blank line just for the hell of it, but I can't see how it figures there's an error in there. Note that before this I did have an error in named.conf.local, but it showed up properly in syslog and I fixed it, so it is reporting the correct file. Here is the contents of named.conf: // This is the primary configuration file for the BIND DNS server named. // // Please read /usr/share/doc/bind9/README.Debian.gz for information on the // structure of BIND configuration files in Debian, *BEFORE* you customize // this configuration file. // // If you are just adding zones, please do that in /etc/bind/named.conf.local include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local"; include "/etc/bind/named.conf.default-zones";

  Read the article

• LDAP Authentication woes

  - by Marcelo de Moraes Serpa

  Hello list, I have a local OpenLDAP server with a couple of users. I'm using it for development purposes, here's the ldif: #Top level - the organization dn: dc=site, dc=com dc: site description: My Organization objectClass: dcObject objectClass: organization o: Organization #Top level - manager dn: cn=Manager, dc=site, dc=com objectClass: organizationalRole cn: Manager #Second level - organizational units dn: ou=people, dc=site, dc=com ou: people description: All people in the organization objectClass: organizationalunit dn: ou=groups, dc=site, dc=com ou: groups description: All groups in the organization objectClass: organizationalunit #Third level - people dn: uid=celoserpa, ou=people, dc=site, dc=com objectclass: pilotPerson objectclass: uidObject uid: celoserpa cn: Marcelo de Moraes Serpa sn: de Moraes Serpa userPassword: secret_12345 mail: [email protected] So far, so good. I can bind with "cn=Manager,dc=site,dc=com" and the 12345678 password (the local server password, setup on slapd.conf). However, I would like to bind with any user in under the people OU. In this case, I'd like to bind with: dn: uid=celoserpa, ou=people, dc=site, dc=com userPassword: secret_12345 But I'm getting a "(49) - Invalid Credentials" error everytime. I have tried through CLI tools (such as ldapadd, ldapwhoami, etc) and also ruby/ldap. The bind with these credentials fails with a invalid credentials error. I thought that it could be an ACL issue, however, the ACLs on slapd.conf seem to be right: access to attrs=userPassword by self write by dn.sub="ou=people,dc=site,dc=com" read by anonymous auth access to * by * read I was suspecting that maybe OpenLDAP doesn't compare against userPassword? Or maybe some ACL configuration I am missing that is somehow affecting the read access to userPassword for the specific DN. I'm really lost here, any suggestion appreciated! Cheers, Marcelo.

  Read the article

• How expensive to run PC 24/7 or how to figure out how to determine it?

  - by jasondavis

  I realize this question is difficult to answer as it would be different based on users location, what there PC is doing and what hardware it consist of, along with other factors but I am hoping someone could give me a very rough estimate. I have always ran many PC's in my home 24/7 and I am just now looking at it from a money/cost of electric point of view. 1) I live in Central Florida. Can anyone guesstomate/estimate the avaerage monthly or daily cost of running your average PC? Intel quad core processor, 1 SSD drive for OS and programs and 4-5 1-2 TB hard drives in a RAID setup for data. 750watt PSU. What would your guess be? 2) Also is there an accurate way to figure this out (non-super technical and confusing to a non-math person please) Also I have seen those kill-a-watt devices, do they figure this kind of stuff out for you? 3) Does a larger PSU make your PC consume more power? Thanks for any help, you can most likely tell I am somewhat lost about this!

  Read the article

< Previous Page | 466 467 468 469 470 471 472 473 474 475 476 477  | Next Page >