Search Results

Search found 39968 results on 1599 pages for 'access manager'.

Page 471/1599 | < Previous Page | 467 468 469 470 471 472 473 474 475 476 477 478  | Next Page >

• Exchange 2010 DAG Automatic Failover Testing/Issue. Not always automatically failing over to health

  - by Richard

  Ok I've got 2 exchange 2010 servers that run client access/hub transport/mailbox roles and one exchange 2010 server running just client access/hub transport roles and acts as my bridgehead. The two mailbox servers are running one database setup in a DAG. Server A shows the DB Mounted and Server B shows Healthy. If I reboot Server A via windows GUI Server B switches from healthy to mounted and I see hardly any interruption in service using Outlook 2007. Server A shows "Service down", then "Failed" then "Healthy" and leaves the DB mounted on Server B. This is how it should work, so far so good. Now if I test Server A being shut down cold, or unplugging both nics from network to simulate failure, Server B switches from Healthy to Mounted and server A switches to "Service Down" but my outlook client never connects to the DB mounted on server B! I can connect to server C (client access/hub transport) and get to my email and even send new email out, but incoming email doesn't deliver until Server A is brought back online and it's DB goes back to Healthy status. So I don't understand why it auto fail-overs when I reboot the server with the mounted DB copy, causing very little outlook 2007 hiccup if any. But when I shutdown or DC the mounted DB server it DOES mount the healthy copy but outlook 2007 clients can't connect.. I hope the picture I'm trying to paint makes some sense, it's driving me a little batty. Any help would be appreciated!

  Read the article

• syspolicy_purge_history generates failed logins

  - by jbrown414

  I have a development server with 3 instances: Default, A and B. It is a physical server, non clustered. Whenever the syspolicy_purge_history job runs at 2 am, I get failed login alerts. Looking at the job steps, all are successfully completed. It appears that some point during the step "Erase Phantom System Health Records" is when the failed logins occur. syspolicy_purge_history on instance B works OK. syspolicy_purge_history on the Default instance seems to want to connect to instance B, resulting in: Error: 18456, Severity: 14, State: 11. Login failed for user 'Machinename\sqlsvc-B'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>] . No errors are reported by Powershell. syspolicy_purge_history on the A instance seems to want to connect to the Default instance resulting in Error: 18456, Severity: 14, State: 11. Login failed for user 'Machinename\sqlsvc-Default'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>] . Then it tries to connect to the B instance, resulting in Error: 18456, Severity: 14, State: 11. Login failed for user 'Machinename\sqlsvc-B'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>] . No errors are reported by Powershell. I tried the steps posted here hoping they would fix it. http://support.microsoft.com/kb/955726 But again, this is not a virtual server nor is it in a cluster. Do you have any suggestions? Thanks.

  Read the article

• configure a Cisco ASA to use MS-CHAP v2 for RADIUS authentication

  - by DrStalker

  Cisco ASA5505 8.2(2) Windows 2003 AD server We want to configure our ASA (10.1.1.1) to authenticate remote VPN users through RADIUS on the Windows AD controller (10.1.1.200) We have the following entry on the ASA: aaa-server SYSCON-RADIUS protocol radius aaa-server SYSCON-RADIUS (inside) host 10.1.1.200 key ***** radius-common-pw ***** When I test a login using the account COMPANY\username I see the users credentials are correct in the security log, but I get the following in the windows system logs: User COMPANY\myusername was denied access. Fully-Qualified-User-Name = company.com/CorpUsers/AU/My Name NAS-IP-Address = 10.1.1.1 NAS-Identifier = <not present> Called-Station-Identifier = <not present> Calling-Station-Identifier = <not present> Client-Friendly-Name = ASA5510 Client-IP-Address = 10.1.1.1 NAS-Port-Type = Virtual NAS-Port = 7 Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = <undetermined> Policy-Name = VPN Authentication Authentication-Type = PAP EAP-Type = <undetermined> Reason-Code = 66 Reason = The user attempted to use an authentication method that is not enabled on the matching remote access policy. My assumption is that the ASA is using PAP authentication, instead of MS-CHAP v2; the credentials are confirmed, the proper Remote Access Policy is being used, but this policy is set to only allow MS-CHAP2. What do we need to do on the ASA to make it us MS-CHAP v2? In the ADSM GUI The "Microsoft CHAP v2 compatible" tickbox is enabled, but I don't know what this corresponds to in the config.

  Read the article

• Exchange 2010 add mailbox server to DAG error

  - by Michael

  Hello, i'm having some problems when adding a second mailbox server to my DAG in Exchange 2010. The test setup goes like this: 1x windows server 2008 (DC/DNS) 2x windows server 2008 (Exchange 2010) I have made sure all services are up and running and that the "Exchange Trusted Subsystem" account is set as a local admin. When i create a DAG i can add the first mailbox server (A) without any problems, but when i go to add the second (B) it gives me an error saying "Unable to contact the Cluster service on 1 other members (member) of the Database availability group. It does the same if i add (B) first and then try to add (A). Here is a part of the log file: [2010-04-05T15:00:27] GetRemoteCluster() for the mailbox server failed with exception = An Active Manager operation failed. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"OpenCluster(EXCHANGE20102.area51.com) failed with 0x6d9. Error: There are no more endpoints available from the endpoint mapper"' failed.. This is OK. [2010-04-05T15:00:27] Ignoring previous error, as it is acceptable if the cluster does not exist yet. [2010-04-05T15:00:27] DumpClusterTopology: Opening remote cluster AREA51DAG01. [2010-04-05T15:00:27] DumpClusterTopology: Failed opening with Microsoft.Exchange.Cluster.Replay.AmClusterApiException: An Active Manager operation failed. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"OpenCluster(AREA51DAG01.area51.com) failed with 0x5. Error: Access is denied"' failed. --- System.ComponentModel.Win32Exception: Access is denied --- End of inner exception stack trace --- Any help would be really appreciated, thanks.

  Read the article

• Convert Custom Firefox Setup to Firefox Portable?

  - by dfree

  I have a pretty awesome firefox set up and spent a lot of time getting it perfect. Is there any way that anyone knows about to convert the entire configuration to portable? Programs like MozBackup are great for backing up the complete set up, but you can't restore a Firefox profile to Firefox portable (maybe there is a workaround to fake it out? or possibly another method?) In case anyone is interested here is the gist of the best add-ons I've found: Autopager (scroll down google and other multi page results without clicking next) Coral IE Tab (IE in firefox - in case a website 'insists' that you use IE) Cyber search (search google straight from the address bar - VERY HELPFUL) Download StatusBar (display progress of downloads in the bottom of ff - no annoying popups FireFTP (erases need for an external FTP client - opens in a tab) Gmail manager (if you use multiple gmail accounts) Session Manager (saving multiple sessions of tabs - ff session recover) Surf Canyon (pull relevant stuff out of the depths of search results - even from craigslist Tab Mix Plus (ESSENTIAL - tab behavior customization - have multiple rows of tabs I also have it set up so you can type 'g test' in the address bar and ff will pull up the google results for 'test'. Similarly have it set up for guitar tabs (tab), facebook (f), wikipedia (w), google maps from my house (gmhome), torrents (tor), ticketmaster (t), rotten tomatoes (rt), craiglist (c) plus about 20 other sites.

  Read the article

• curl FTPS with client certificate to a vsftpd

  - by weeheavy

  I'd like to authenticate FTP clients either via username+password or a client certificate. Only FTPS is allowed. User/password works, but while testing with curl (I don't have another option) and a client certificate, I need to pass a user. Isn't it technically possible to authenticate only by providing a certificate? vsftpd.conf passwd_chroot_enable=YES chroot_local_user=YES ssl_enable=YES rsa_cert_file=usrlocal/ssl/certs/vsftpd.pem force_local_data_ssl=YES force_local_logins_ssl=YES Tested with curl -v -k -E client-crt.pem --ftp-ssl-reqd ftp://server:21/testfile the output is: * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS handshake, Server hello (2): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS handshake, Request CERT (13): * SSLv3, TLS handshake, Server finished (14): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS handshake, Client key exchange (16): * SSLv3, TLS handshake, CERT verify (15): * SSLv3, TLS change cipher, Client hello (1): * SSLv3, TLS handshake, Finished (20): * SSLv3, TLS change cipher, Client hello (1): * SSLv3, TLS handshake, Finished (20): * SSL connection using DES-CBC3-SHA * Server certificate: * SSL certificate verify result: self signed certificate (18), continuing anyway. > USER anonymous < 530 Anonymous sessions may not use encryption. * Access denied: 530 * Closing connection #0 * SSLv3, TLS alert, Client hello (1): curl: (67) Access denied: 530 This is theoretically ok, as i forbid anonymous access. If I specify a user with -u username:pass it works, but it would without a certificate too. The client certificate seems to be ok, it looks like this: client-crt.pem -----BEGIN RSA PRIVATE KEY----- content -----END RSA PRIVATE KEY----- -----BEGIN CERTIFICATE----- content -----END CERTIFICATE----- What am I missing? Thanks in advance. (The OS is Solaris 10 SPARC).

  Read the article

• Having trouble using psservice and sc.exe between Windows Server 2008 machines

  - by Teflon Mac

  I'm trying to control services on one W2k8 machine from another; no domain just a workgroup. The user account I'm logged in as is an administrator on both machines. I've tried both psservice and sc.exe. These work in a Windows Server 2003 environment but it looks like I need to an extra step or two due to the changed security model in 2008. Any ideas as to how grant permission to the Service Control Manager (psservice) or OpenService (sc)? I tried running the DOS window with "Run As Administrator" and it made no difference. With psservice I get the following D:\mydir>psservice \\REMOTESERVER -u "adminid" -p "adminpassword" start "Display Name of Service" PsService v2.22 - Service information and configuration utility Copyright (C) 2001-2008 Mark Russinovich Sysinternals - www.sysinternals.com Unable to access Service Control Manager on \\REMOTESERVER: Access is denied. In the remote server, I get the following message in the Security Log so I know I connect and login to the remote machine. I assume it then fails on a subsequent authorization step. The logoff message in the security log is just that ("An account was logged off."), so no extra info there. Special privileges assigned to new logon. Subject: Security ID: REMOTESERVER\adminid Account Name: adminid Account Domain: REMOTESERVER Logon ID: 0xxxxxxxx Privileges: SeSecurityPrivilege SeBackupPrivilege SeRestorePrivilege SeTakeOwnershipPrivilege SeDebugPrivilege SeSystemEnvironmentPrivilege SeLoadDriverPrivilege SeImpersonatePrivilege sc.exe is similar. The command syntax and error differs as below but I also see the same login message in the remote server's security log. D:\mydir>sc \\REMOTESERVER start "Registry Name of Service" [SC] StartService: OpenService FAILED 5: Access is denied.

  Read the article

• How do I host node.js apps with pm2 without running them as root?

  - by jishi

  I have setup pm2 to run a node.js application, and I can successfully start it and it will resurrect upon reboot. However, the pm2 daemon is ran as root, which makes me think that all my node-scripts also runs as root? Even though I added them as a regular user in the system. The log files and stuff is created in the users home dir, /~/.pm2/logs, but the logs are owned by root. when I invoke pm2 startup (which handles the installation of the init.d script etc), it creates /etc/init.d/pm2-init.sh which looks like this: #!/bin/bash # chkconfig: 2345 98 02 # # description: PM2 next gen process manager for Node.js # processname: pm2 # ### BEGIN INIT INFO # Provides: pm2 # Required-Start: # Required-Stop: # Should-Start: # Should-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: PM2 init script # Description: PM2 is the next gen process manager for Node.js ### END INIT INFO NAME=pm2 PM2=/usr/local/lib/node_modules/pm2/bin/pm2 NODE=/usr/local/bin/node export HOME="/root" start() { echo "Starting $NAME" $NODE $PM2 stopAll $NODE $PM2 resurrect } stop() { $NODE $PM2 dump $NODE $PM2 stopAll } restart() { echo "Restarting $NAME" stop start } status() { echo "Status for $NAME:" $NODE $PM2 list RETVAL=$? } case "$1" in start) start ;; stop) stop ;; status) status ;; restart) restart ;; *) echo "Usage: {start|stop|status|restart}" exit 1 ;; esac exit $RETVAL When I dump the processes (which is what it will use when resurrecting the processes), I see mentions of user "USER":"pi" but I don't think that it's actually run as user pi. Any thoughts?

  Read the article

• VMRC equivalent for Hyper-V?

  - by Ian Boyd

  VMRC was the client tool used to connect to virtual machines running on Virtual Server. Upgrading to Windows Server 2008 R2 with the Hyper-V role, i need a way for people to be able to use the virtual machines. Note: not all virtual machines will have network connectivity not all virtual machines will be running Windows some people needing to connect to a virtual machine will be running Windows XP Hyper-V manager, allowing management of the hyper-v server, is less desirable (since it allows management of the hyper-v server (and doesn't work on all operating systems)) What is the Windows Server 2008 R2 equivalent of VMRC; to "vnc" to a virtual server? Update: i think Tatas was suggesting Microsoft System Center Virtual Machine Manager Self-Service Portal 2.0 (?): Which requires SQL Server IIS Installing those would unfortunately violate our Windows Server 2008 R2 license. i might be looking at the wrong product link, since commenter said there is a version that doesn't require "System Center". Update 2: The Windows Server 2008 R2 running HyperV is being licensed with the understanding that it only be used to host HyperV. From the [Windows Server 2008 R2 Licensing FAQ][4]: Q. If I have one license for Windows Server 2008 R2 Standard and want to run it in a virtual operating system environment, can I continue running it in the physical operating system environment? A. Yes, with Windows Server 2008 R2 Standard, you may run one instance in the physical operating system environment and one instance in the virtual operating system environment; however, the instance running in the physical operating system environment may be used only to run hardware virtualization software, provide hardware virtualization services, or to run software to manage and service operating system environments on the licensed server. This is why i'm weary about installing IIS or SQL Server.

  Read the article

• Cannot run "Automation Anywhere" exe files from console (session 0) on Windows Server 2003 64 bit

  - by Tyler

  I have a simple exe created from an Automation Anywhere task that displays a message box saying hello world. I created this simple exe just for debugging the following issue. When I log in to the console (session 0), and run the Automation Anywhere created executable, it starts to run the task, it shows up in the applications and processes list in the task manager and it shows the two "loading..." windows briefly on the screen, just like normal. But after that, nothing happens... the "hello world" message does not show up. The exe is done and is removed from the application and process list in the task manager. The user I am logged in as, has admin rights and the machine uses "autologin" to automatically log in using this profile when it starts up. If I right click on the exe and "run as" another admin user, the exe runs properly, showing the "hello world" message. Also, if I log into the server in a new session, with the original user (the one that has the problems in session 0), and then run the exe, it runs properly and shows the "hello world". It works fine in any session other than the console session. There is something about the console session that is causing the exe not to run properly... even though it does appear to start running the exe. I should also mention that everything was working fine until Monday at midnight, after which none of the executables could be run successfully. Nothing was changed on the server and no updates were installed. I have since installed windows updates, but that didn't change anything. Looking for some advice on how to get these executables working in the console session again. Thanks!

  Read the article

• Postfix: LDAP not working (warning: dict_ldap_lookup: Search base not found: 32: No such object)

  - by Heinzi

  I set up LDAP access with postfix. ldapsearch -D "cn=postfix,ou=users,ou=system,[domain]" -w postfix -b "ou=users,ou=people,[domain]" -s sub "(&(objectclass=inetOrgPerson)(mail=[mailaddr]))" delivers the correct entry. The LDAP config file looks like root@server2:/etc/postfix/ldap# cat mailbox_maps.cf server_host = localhost search_base = ou=users,ou=people,[domain] scope = sub bind = yes bind_dn = cn=postfix,ou=users,ou=system,[domain] bind_pw = postfix query_filter = (&(objectclass=inetOrgPerson)(mail=%s)) result_attribute = uid debug_level = 2 The bind_dn and bind_pw should be the same as I used above with ldapsearch. Nevertheless, calling postmap doesn't work: root@server2:/etc/postfix/ldap# postmap -q [mailaddr] ldap:/etc/postfix/ldap/mailbox_maps.cf postmap: warning: dict_ldap_lookup: /etc/postfix/ldap/mailbox_maps.cf: Search base 'ou=users,ou=people,[domain]' not found: 32: No such object If I change LDAP configuration, so that anonymous users have complete access to LDAP olcAccess: {-1}to * by * read then it works: root@server2:/etc/postfix/ldap# postmap -q [mailaddr] ldap:/etc/postfix/ldap/mailbox_maps.cf [user-id] But when I restrict this access to the postfix user: olcAccess: {-1}to * by dn="cn=postfix,ou=users,ou=system,[domain]" read by * break it doesn't work but produces the error printed above (although ldapsearch works, only postmap doesn't). Why doesn't it work when binding with a postfix DN? I think I set up the LDAP ACL for the postfix user correctly, as the ldapsearch command should prove. What can be the reason for this behaviour?

  Read the article

• XP machines on Domain not reporting WMI Data in a 2003 Server Environment

  - by Az

  I am running into a very quirky issue and I hope someone out there can help. We use a monitoring program for several networks we oversee that is WMI data dependent for a great deal of it's functionality. The Windows 2000 Professional workstations, as well as the 2003 servers in our network report WMI data fine, the Windows XP professional machines will not let me view them from within the WMI snap in for MMC (they return a Win32: Access Denied) error. I am of course logged in with an account with domain admin privileges on the domain controller when I attempt it. DCOM is enabled in component services, and the remote security option is set to allow as well. If we remove the machine from the domain and rejoin it, some workstations will show up as WMI enabled temporarily and then when I try to access them again later I get the access denied error again out of the blue. Hoping someone out there has had a similar problem or they have advice. I have had this problem with the firewall turned on or off. Thanks for your time! -Az

  Read the article

• FTP timing out after login

  - by Imran

  For some reasons I cant access any of my accounts on my dedicated server via FTP. It simply times out when it tried to display the directories. Heres a log from FileZila... Status: Resolving address of testdomain.com Status: Connecting to 64.237.58.43:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [TLS] ---------- Response: 220-You are user number 3 of 50 allowed. Response: 220-Local time is now 19:39. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER testaccount Response: 331 User testaccount OK. Password required Command: PASS ******** Response: 230-User testaccount has group access to: testaccount Response: 230 OK. Current restricted directory is / Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: ESTP Response: PASV Response: EPSV Response: SPSV Response: ESTA Response: AUTH TLS Response: PBSZ Response: PROT Response: 211 End. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (64,237,58,43,145,153) Command: MLSD Response: 150 Accepted data connection Response: 226-ASCII Response: 226-Options: -a -l Response: 226 18 matches total Error: Connection timed out Error: Failed to retrieve directory listing I have restarted the FTP service serveral times but still It doesnt loads. I only have this problem when my server is reaching it peak usage which is still only 1.0 (4 cores), 40% of 4GB ram. The ftp connections isnt maxed out because only me and my colleague have access to FTP on the server.

  Read the article

• Two-way Trust relationship between Samba 3 and AD 2008 R2

  - by Romain

  Did somebody already make a two-way trust relationship between Samba 3 and AD ? I've got Samba 3.5 domain (ES02) controller and AD 2008 R2 domain (ES01) controller. Trust domain seems to be ok: Trusted domains list: ES01 S-1-5-21-1816646249-803782145-3669927669 Trusting domains list: ES01 S-1-5-21-1816646249-803782145-3669927669 I can login AD domain workstation with a Samba user account and access to AD domain workstation shares from Samba workstation with Samba user account. BUT, when I try to access to Samba domain workstation shares from AD domain workstation with AD account (test), I've got this: [2012/12/16 23:00:26.146090, 5] auth/auth.c:268(check_ntlm_password) check_ntlm_password: winbind authentication for user [test] FAILED with error NT_STATUS_NO_SUCH_USER [2012/12/16 23:00:26.146123, 2] auth/auth.c:314(check_ntlm_password) check_ntlm_password: Authentication for user [test] - [test] FAILED with error NT_STATUS_NO_SUCH_USER When I try to access samba share with the Administrator account that I create on both side with same password, I've got this: [2012/12/16 22:57:22.701841, 1] rpc_server/srv_pipe_hnd.c:1602(serverinfo_to_SamInfo_base) _netr_LogonSamLogon: user ES01\Administrator has user sid S-1-5-21-1816646249-803782145-3669927669-500 but group sid S-1-5-21-3405883886-2425668597-4100599511-513. The conflicting domain portions are not supported for NETLOGON calls I don't know if winbind is working because of this: wbinfo -u root nobody smb3user administrator "wbinfo -u" should list all local and trusted users, no ? Any fresh idea would be appreciated, I've been reading all the Internet for 1 week... Regards,

  Read the article

• Can't connect to computer via SBS2011 RWA

  - by sbrattla

  I've got an SBS 2011 Essentials server. Users a able to log on to Remote Web Access using their username and password. However, the trouble starts when a users attempts to log on remotely to his/her computer from the Remote Web Access website. When the user clicks on his/her computer (in the RWA website), the user is first presented with a window listing Publisher, Type, Remote Computer name and Gateway Server. Everything seems fine here, and the user clicks Connect. The user credentials are provided, and a connection is attempted. However, the logon attempt always fails with the message "The logon attempt failed". The logon attempt always generates three log events in the server log: EventId: 4672 - Special Logon EventId: 4624 - Logon EventId: 4634 - Logoff All events happens have the same timestamp. No events are logged on the client machine which the user attempts to log on to. Others have solved this by going to their IIS server and enable "Windows Authentication" for Rpc and RpcWithCert (in Default Web Site). However, this is in place on the server. I've also got RD CAPs and RD RAPs in place. As a side note; if i try to connect to any of the machines using the Remote Desktop Connection using the "Connect from anywhere" functionality - then things work flawlessly! In other words, the error only occurs when attempting to login to a computer via the Remote Web Access website. I've run out of ideas for how I can solve this (too many hours spent). Any ideas highly appreciated!

  Read the article

• Adding data sources for unixODBC/isql on Mac OSX Lion

  - by NP01

  I have installed unixODBC from source and mysql-odbc connector from .dmg installer on Mac OSX Lion. This was done a while ago, and at that time I successfully installed a data source (let's call it foo). Now I am trying to add another data source (DSN). I've done this through both ODBC Manager and the command-line tool myodbc-installer given with the tar bundle of the mysql-odbc connector from the mysql website. An entry shows up in /Library/ODBC/odbc.ini, which looks like this: [ODBC Data Sources] bar = MySQL ODBC 5.1 Driver [ODBC] Trace = 0 TraceAutoStop = 0 TraceFile = TraceLibrary = [myodbc] Driver = /usr/local/lib/libmyodbc5.so SERVER = localhost PORT = 3306 [bar] Driver = /usr/local/lib/libmyodbc5.so Description = DATABASE = bar However, isql fails to find it: anitya:Preferences neil$ isql bar bar bar -v [IM002][unixODBC][Driver Manager]Data source name not found, and no default driver specified [ISQL]ERROR: Could not SQLConnect Weird thing is, the old DSN foo, which is not to be seen in /Library/ODBC/odbc.ini or /etc/odbc.ini, works fine: anitya:Preferences neil$ isql foo foo foo +---------------------------------------+ | Connected! | | | | sql-statement | | help [tablename] | | quit | | | +---------------------------------------+ SQL> I'm miffed about where the DSN entries need to be entered on OSX Lion to be found by isql. Thanks in advance for your help!

  Read the article

• pfSense Firewall or Linsys/Cisco router for small offices

  - by Tim Meers

  I'm about to start switching some networks around for multiple small offices. Each office has about 10 to 15 users and 10 to 15 computers. Each office has a spread of generic routers and access points. The routers vary from being used as routers, to just being an access point for wireless. Nothing formal has really ever beem implemented for each of the 10 offices. What I'm wanting is to set up a pfSense box for each office to configure things like: traffic shaping (for VoIP QOS) URL Filtering DHCP static routing multiple VLANs I'll then use some of the existing hardware for wireless. Maybe even integrate the wireless right into the firewall depending on the office layout. So my question, would this be better to do a full blown firewall box, or but a new business class or high end consumer class Linksys router to do the URL filtering, QOS and DHPC? Each option could allow for remote access and VPN for remote maintnance and each would only cost a nominal about of money for something decent, i.e. under $250.

  Read the article

• Web based KVM management for Ubuntu

  - by Tim

  Hey all, We've got a single Ubuntu 9.10 root server on which we want to run multiple KVM virtual machines. To administer these virtual machines I'd like a web based KVM management tool, but I don't know which one to choose from the list of tools mentioned on linux-kvm.org. I've used virsh & virt-manager on my desktop, but would like a web interface for the server. I tested ConVirt on my desktop, but it failed to pickup KVM machines from virsh / virt-manager, and I could not get KVM virtual machine import to work (only Xen). oVirt looks good, but I can't find out if and how I can install it on Ubuntu 9.10.. (And I'd really rather not waste another few days on testing stuff that might not work in the end.) Can anyone recommend any good web based KVM management tools that are easy to install on Ubuntu 9.10? I'm looking for something that will also allow me to run other services like apache and postgresql besides hosting virtual machines, so preferably fairly lightweight & no dedicated OS installs. We don't need any professional clustering / migration or anything, just something that will let us create, start, inspect, administer & stop virtual machines from a web page. Best regards, Tim

  Read the article

• VMWare ESX, storage over 2TB

  - by Phliplip

  Hi, First of, i'm a webdeveloper and my server experience lies in setting up FreeBSD servers for webserver. I'm working on a project for at photographer, and i'm hired to develop a new online photo ordering system - where user of course can view their photos :) They have a massive need of storage, thus we have bought a HP G6 and 8x1TB SATA HDD. Our plan is to install VMWare ESX 4.0, running multiple virtual machines; FreeBSD 8 for webserver and some windows servers. Allready done that. Then mount one big storage to the BSD, and share it through Samba to the WinServers. The raid is set up with an array of 2x 1TB to handle the VMs. And the rest is setup as 3 2x1TB to handle the photo-data. Thus 2.73TB for photo-data (the raids are 1+0). Now if we add a datastore in the ESX and add the 3 LUNs we can get a datastore of 2.74TB. But i don't se how i can add this datastore direct to the VM. Only the BSD VM needs access to this. Only way is to create a VirtualDisk, with a max of 2TB (8MB blocksize). This is because the datastore where we save the virtualdisk has a maximum filesize of 2TB. Then add it as a harddisk to the BSD VM. In the 'Add Harddisk' pane for the VM, i see an option for Raw Disk Management. I think this is to access the datastore or the raid directly. Only problem is that its greyed out! Can i access the datastorage directly from the BSD? Without creating and adding virtualdisk.

  Read the article

• How to repair multiple KDC an Netlogon errors

  - by Keith Sirmons

  Howdy, I have several erros in the system event log of my single Windows 2003 SP2 domain controller. Multiple member computers on the domain are listed in these errors. I am seeing two similar errors for each computer one second apart in the event log. Event ID 7 Source KDC The Security Account Manager failed a KDC request in an unexpected way. The error is in the data field. The account name was [email protected] and lookup type 0x8. followed by Event ID 7 Source KDC The Security Account Manager failed a KDC request in an unexpected way. The error is in the data field. The account name was MEMBERNAME$ and lookup type 0x8. The Lookup Types are also different, I have 0x8, 0x28, 0x0, 0x20. I am also receiving other authentication errors in the same time frame as all of the KDC errors Event ID 5722 Source NETLOGON The session setup from the computer MEMBERNAME failed to authenticate. The name(s) of the account(s) referenced in the security database is MEMBERNAME$. The following error occurred: Access is denied. I have run dcdiag /v to see if there was something wrong with Active Directory, but all tests passed. I also ran netdiag /v and it appers all of those tests ran. Any ideas on where to start for this issue? Thank you, Keith

  Read the article

• Ubuntu Server running VNC

  - by xwapilot

  I have access to four computers: 1 Ubuntu Server desktop (Version 10.04) 1 Mac Mini (Snow Leopard) 1 Windows desktop (Windows 7) 1 Windows laptop (Windows Vista) The first three will always be on the home network. My goal is to SSH from the laptop into the server and be able, through VNC (or another remote desktop software), to control the windows and mac computers. The goal of this would be a slightly heightened network security over using VNC to directly access the mac or windows desktop. I have successfully used SSH to connect to the server, but have not been able to successfully implement the remote desktop connection. I would appreciate help doing so. Here's what I've done so far: As per instructions here: http://www.stuartellis.eu/articles/vnc-on-linux/ I installed the following: vnc4server – the main VNC server software vnc-java – enables access from Web browsers with Java support xvnc4viewer – a basic VNC viewer I then set up a password using the vncpasswd command. To attempt to connect to the mac, I followed directions I found in a thread at superuser. com and went to "System PreferencesSharing" and enabled "Screen Sharing". Subsequently, I tried entering the following commands into Ubuntu: vncviewer mac_ip_address::5904 vncviewer mac_ip_address:0 vncviewer mac_ip_address:1 They all returned the following: VNC Viewer Free Edition 4.1.1 for X - built Apr 9 2010 18:41:55 Copyright (C) 2002-2005 RealVNC Ltd. See http ://www .realvnc. com for information on VNC. vncviewer: unable to open display "" I'm sure I'm missing something important, but I'm not sure what it is. Do I need to have a GUI installed, or did that come with the vnc packages I installed?

  Read the article

• How to securely enable file sharing over PPTP on Windows 2008 Server

  - by Damage

  I have set up a Windows SBS 2003 domain (LAN) and a stand-alone Windows 2008 Server (web server) at another location (workgroup). I established PPTP VPN connection (SBS dials web server) over which users from LAN should be able to access web server. On web server I enabled TCP/IPv4 and File and Printer sharing protocol. It has a few external addresses (one of them is default) AND one local address (192.x.x.x) assigned to network adapter. Firewall allows port 445 for file sharing. There's the problem - I can not enable web server file shares to be visible to LAN users and ONLY to LAN users: From SBS I can access webserver but I cannot access webserver from LAN workstations (XP, Vista). I have had same configuration - I have just replaced old (web server) Windows 2003 server with 2008 so SBS settings are the same (static route, DNS etc.). How can I enable file sharing on web server for LAN workstations? Now I have opened File and printer sharing to the internet which is of course totaly unsecure. I tried to secure the tunnel so I moved RAS (VPN) connection (Network Center) on web server to "Private" profile and moved firewall port 445 to "Private" profile but suddenly file sharing does not work and I cannot telnet webserver on port 445. How can I secure file sharing so I do not have to open it to the internet?

  Read the article

• SQL Server 2008 Express + Reporting Services on Windows 7

  - by TimothyP

  I'm trying to install SQL Server Express 2008 and Reporting Services on a x64 Windows 7 Machine for development purposes. I've installed SQL Server 2008 Express with the Microsoft Web Platform Installer I had to manually enable the SQL Server Browser in the Sql Server Configuration Manager and tried to enable the SQL Server Agent but that simply doesn't work. Keeps throwing an RPC error: "The remote procedure call failed. [0x800706be]". The start mode is set to Disabled and I cannot change it. Even though I selected the SQL Server Express with advanced services in the web platform installer I could not find any reference to SQL Server Reporting Services so I used the SQL Server Installation Center x64 application to "upgrade" to SQL Server Express 2008 with advanced services... this installed many things but still I couldn't find any reference to SQL Server Reporting Services other than an application called: "Reporting Services Configuration Manager" This opens up a dialog called "Reporting Services Configuration Connection" which is asking for a server name (shows the name of my machine) and a Find button. When I click the find button I get: "Unable to connect to the Reporting Server WMI provider. Details: Invalid Namespace". I found some references on the web to solve this problem, but they refer to a directory: "%ProgamFiles%\Microsoft SQL Server\MSRS10.SQL2008\Reporting Services\" which does not exist anywhere on my system. (The directories for SQL Server are there, but there is no Reporting Services directory anywhere). What am I doing wrong here? Wasn't the web platform installer supposed to handle all this? Thnx for any advice. PS: Most google results refer to 2005 vs 2008 problems, but I never had 2005 installed on this system, it's a newly installed development machine.

  Read the article

• VMWare Server Windows 2008 NAT Problem

  - by David

  At my new job our workstations run Windows Server 2008. However, for the specific task for which I've been hired, I need to set up a couple Linux VMs. So I grabbed the free VMWare Server and created an Ubuntu image and a Slackware image. (The former to more closely mimic the production server, the latter because I'm more familiar with it.) For desktop security purposes I need to use NAT for the network access (I would have preferred bridged, but I'm told that would go against some policy here and my whole workstation would be sandboxed from the switch). However, I can't seem to get it working right. I can ping out from the VMs to LAN addresses as well as internet addresses. I can resolve DNS names. However, attempts to use a web browser or perform any kind of higher-level interaction like that just time out. Googling around yesterday led me to various workarounds that were similar, but didn't solve my specific situation. (For example, Norton firewall blocking the connection on the host, or even the Windows firewall.) I also saw some forum posts where people said it's a known issue with VMWare and Windows Server 2008 (and Windows 7). So far I haven't been able to find a suggestion that gets me past this roadblock. I'm really not very familiar with managing a Windows Server 2008 box, so it's possible there's just some security setting somewhere that I need to modify. Does anybody have any suggestions on where I should look? UPDATE: I'm now looking at the "Network and Sharing Center" on the host workstation and it shows "VMWare Network Adapter VMnet8" (which is what I'm using) as an "Unidentified network" with "No Internet access." Looks like I can't modify ICS under the group policy. Any suggestions on how to allow this connection to have internet access?

  Read the article

• Missing taskbar buttons on Taskbar in Windows XP

  - by Nargis

  My Windows XP only show Taskbar without taskbar buttons. I can change Task Windows using Alt+Tab Keys. In task Manager, there is show All open windows and task. But Missing taskbar buttons on taskbar. I've already repair windows by "second R". But still missing taskbar buttons. If I reinstall windows, then I will lost all software program install on that windows XP. I don't want to reinstall all software program after windows installation. So what shall I do, Please share your experience. I would like to know how to show taskbar bottons on taskbar without reinstall. Other toolbars on taskbar are OK. Only missing task windows-buttons Taskbar ??? taskbar buttons ??????????????? Alt+Tab ??? ??????????? Task Manager ??? ???????? Taskbar ??? ??????? windows ????????????????? ??????? not repair windows and reinstall ?????????? ????? software ??????? ???? install ???? . . . ??????????? ???????????????

  Read the article

< Previous Page | 467 468 469 470 471 472 473 474 475 476 477 478  | Next Page >