Search Results

Search found 16808 results on 673 pages for 'computer guru'.

Page 472/673 | < Previous Page | 468 469 470 471 472 473 474 475 476 477 478 479  | Next Page >

  • Grub does not show a Windows 8 option after dual boot

    - by skytreader
    So, I've successfully dual-booted my Windows 8 machine with Ubuntu 12.04 . However, I still don't have a convenient method of choosing what OS to load at boot time. After installing Ubuntu, my computer still loads Windows 8 directly. I then added grubx64.efi to the white list of my boot loader. But after that, my machine loads Ubuntu directly without even a shadow of GRUB showing up! I used boot-repair and I got this paste.ubuntu URL: paste.ubuntu.com/1326074. After running boot-repair (and re-white listing the grubx64.efi file), GRUB now shows up but without any Windows 8 option! Lastly, I ran sudo fdisk -l and it gave me this: WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x6396389f Device Boot Start End Blocks Id System /dev/sda1 1 1465149167 732574583+ ee GPT Partition 1 does not start on physical sector boundary. I'm guessing my problem has something to do with the warning from fdisk above but I don't know what to do with it. How do I proceed now?

    Read the article

  • Sound problems in Windows 7

    - by Plastkort
    hi! I hope I reached the correct forum for this question. I have a media computer with a third party audio card (Soundblaster audigy SE) I use a coaxial digital audio cable connected to a Onkyo TX SR508. if I use normal audio, the sound seems very low, I have to set volume atleast to 62 in my amplifier to hear anything, however if I set digital SPDIF I have no means of controlling the audio volume from the PC (only from the amplifier) and this can be nasty if I toggle between movies that uses Digital AC3/THX and movies wihtouth, if I look at movies capable of AC3 the volume gets VERY loud if amp is set to 62, 32 is more than enough volume when using passthrough. so this bothers me is how can I get the same amount of volume with or without digital output? I tried also other soundcards, internal red light Digital audio cable... if I connect to my television I get ok sound on any sound source via HDMI... help :)

    Read the article

  • How does an OS communicate with other hardware components?

    - by Jack
    How can a program running on a CPU (mostly OS) access other PC hardware? Such as Graphic card, HDD and so? From what I read, in DOS, this was done using BIOS calls, specifically the INT instruction. But, the INT instruction should only jump to the certain space in RAM. So how can some program stored in RAM access other computer hardware, when the CPU can only access RAM, and receive interrupts? Does Windows use INT instructions as well, or is there a new way to communicate with the hardware?

    Read the article

  • CodePlex Daily Summary for Sunday, July 21, 2013

    CodePlex Daily Summary for Sunday, July 21, 2013Popular ReleasesMagick.NET: Magick.NET 6.8.6.601: Magick.NET linked with ImageMagick 6.8.6.6.MISAO: Ver. 5.33: Latest app and add-insC# Intellisense for Notepad++: Initial release: Members auto-complete Integration with native Notepad++ Auto-Completion Auto "open bracket" for methods Right-arrow to accept suggestions51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.19.4: One Click Install from NuGet This release introduces the 51Degrees.mobi IIS Vary Header Fix. When Compression and Caching is used in IIS, the Vary header is overwritten, making intelligent caching with dynamic content impossible. Find out more about installing the Vary Header fix. Changes to Version 2.1.19.4Handlers now have a ‘Count’ property. This is an integer value that shows how many devices in the dataset that use that handler. Provider.cs -> GetDeviceInfoByID to address a problem w...SalarDbCodeGenerator: SalarDbCodeGenerator v2.1.2013.0719: Version 2.1.2013.0719 2013/7/19 Pattern Changes: * DapperContext pattern is added. * All patterns are updated to work with one-to-one relations. Changes: * One-to-one relation is supported. * Minor bug fixes.Player Framework by Microsoft: Player Framework for Windows and WP (v1.3 beta 2): Includes all changes in v1.3 beta 1 Additional support for Windows 8.1 Preview New API (JS): addTextTrack New API (JS): msKeys New API (JS): msPlayToPreferredSourceUri New API (JS): msSetMediaKeys New API (JS): onmsneedkey New API (Xaml): SetMediaStreamSource method New API (Xaml): Stretch property New API (Xaml): StretchChanged event New API (Xaml): AreTransportControlsEnabled property New API (Xaml): IsFullWindow property New API (Xaml): PlayToPreferredSourceUri proper...Outlook 2013 Add-In: Multiple Calendars: As per popular request, this new version includes: - Support for multiple calendars. This can be enabled in the configuration by choosing which ones to show/hide appointments from. In some cases (public folders) it may time out and crash, and so far it only supports "My Calendars", so not shared ones yet. Also they're currently shown in the same font/color so there are no confusions with color categories, but please drop me a line on any suggestions you'd like to see implemented. - Added fri...Circuit Diagram: Circuit Diagram 2.0 Beta 2: New in this release: Show grid in editor Cut/copy/paste support Bug fixesDaRenamer: Renamer 2.1.0.5: Version 2.1.0.5 -fixed minor bugInstall Verify Tool: Install Verify Tool V 1.0: Win Service Web Service Win Service Client Web Service ClientOrchard Project: Orchard 1.7 RC: Planning releasedTerminals: Version 3.1 - Release: Changes since version 3.0:15992 Unified usage of icons in user interface Added context menu in Organize favorites grid Fixed:34219 34210 34223 33981 34209 Install notes:No changes in database (use database from release 3.0) No upgrade of configuration, passwords, credentials or favorites See also upgrade notes for release 3.0PMU Connection Tester: PMU Connection Tester v4.4.0: This is the current release build of the PMU Connection Tester, version 4.4.0 This version of the connection tester was released with openPDC 1.5 SP1 and openPDC 2.0 BETA. This application requires that .NET 4.0 already be installed on your system. Note this is the last release of the PMU Connection Tester that will built on .NET 4.0 using the TVA Code Library and the Time-series Framework. Future releases of the PMU Connection Tester will be built on .NET 4.5 (or later) using the Grid Sol...HiUpdateTools - easy publish and update your app: HiUpdateTools Add-in 1.0.0.5: - Generate ClientConfig.xml and adding to the project - Set ClientConfig.xml option "CopyToOutputDirectory"= Copy if newer - Fix client path not ending the backslash - Add Client assembly to VSX package - On first use, the tool is added to the reference to the client assembly - Fix client application - Multi-instance application - Run single instance of update applicationopen gaze and mouse analyzer: Ogama 4.4 BETA: This beta was published on 16.07.2013 and includes fixes and improvements since last 4.3 release, mainly in the recording section which solves problems with tobii and mirametrix devices, see the source code tab for details. Please test it, if you have one of this devices and give me feedback using the issue tracker or discussion tabs. Don´t forget to install .Net 4 framework and SQL Express before installing Ogama. When using Tobii tracking devices, you have to install apple bonjour also. On...SpaceFlight: SpaceFlight_v1.1: Added VCRedist.exe , run this first if you get the "MSVCP100.dll is missing" issueAdvanced Resource Tab for Blend: Advanced Resource Tab 2.0: Added filtering of (sub)-resource items and collapsing / expanding of all resource dictionaries.Media Companion: Media Companion MC3.573b: XBMC Link - Let MC update your XBMC Library Fixes in place, Enjoy the XBMC Link function Well, Phil's been busy in the background, and come up with a Great new feature for Media Companion. Currently only implemented for movies. Once we're happy that's working with no issues, we'll extend the functionality to include TV shows. All the help for this is build into the application. Go to General Preferences - XBMC Link for details. Help us make it better* Currently only tested on local and ...Wsus Package Publisher: Release v1.2.1307.15: Fix a bug where WPP crash if 'ShowPendingUpdates' is start with wrong credentials. Fix a bug where WPP crash if ArrivalDateAfter and ArrivalDateBefore is equal in the ComputerView. Add a filter in the ComputerView. (Thanks to NorbertFe for this feature request) Add an option, when right-clicking on a computer, you can ask for display the current logon user of the remote computer. Add an option in settings to choose if WPP ping remote computers using IPv4, IPv6 or IPv6 and, if fail, IP...Lab Of Things: vBeta1: Initial release of LoTNew ProjectsBlindspot: This project aims to create a fully-functional windowless desktop application allowing blind/visually impaired music fans the chance to access Spotify.HelloReading: ???????MonteMediaCC: The Monte Media Library is a Java library for processing media data. Supported media formats include still images, video, audio and meta-data. NETDeob: Deobfuscator and Unpacker for .NET Files.NthCatalanNumber: Write a program to calculate the Nth Catalan number by given N. http://en.wikipedia.org/wiki/Catalan_numberPokemon Battle Online 0791: ???????project site: the-west minimapPSeG Server FIles: PSeG Server FilesSample VariableSizedWrapGrid: This is an example of the use of particular VariableSizedWrapGrid GridView control. Where we can set the size of each item as needed It can make an appearance oServices Monitoring Management Pack: La supervision des services automatiques est un élément qui est déficient dans Operations Manager. Ce « Management Pack » sert à surveiller les services automatSinaIsTestingHisNewProject: this project is only for testing this site and any copying without my permission will be sewed by me and will be tracked by CIA and FBI and will be HeadShotSum of a sequence: Write a program that, for a given two integer numbers N and X, calculates the sum S = 1 + 1!/X + 2!/X2 + … + N!/XN Synchrophasor Analytics: Synchrophasor Analytics is a front end data processing and conditioning for downstream phasor based applications and an extension for development and analysis.tcp-bridge: a tcp bridge service to redirect incoming connections to another machine by using another incoming or outgoing connectionTypeScript Class Library: The TypeScript Class Library WPDialog: Library for developing app dialogs for Windows phone similar to Monotouch.DialogWPF File Renamer: Simple file renaming application made to brush up on my WPF data binding and MVVM skills.

    Read the article

  • What if you've been asked to develop a site and the client later introduces Ts&Cs that you'll breach whilst doing your job?

    - by Matt Lacey
    Disclaimer : this is all made up. Honest. And it represents no clients or employers living or dead, blah blah blah, etc. [Allegedly] As part of a website I've built, I've now been provided the Terms and Conditions of site usage to display on the site. These terms--which must be agreed to to access the site--include my (or any visitor to the sites) compliance with a number of clauses. Many of these clauses refer to general computer use and are not tied specifically to use of the site. Some of these clauses refer to things I have had to previously do as a legitimate part of my job and would expect to have to do again. When I've raised similar issues previously my line manager has said just to ignore it but that doesn't seem to be the professional thing to do. So, what do I do? Abiding by the terms would mean that I could no longer work on the project and would cause issues with my employer and the owner of the business the site is being created for. Ignoring them could lead to possible future issues with the business owner and is not something I'm necessarily happy with (the deliberate breaking of a legal contract). Neither option is one I'd choose and could have major consequences. Any thoughts?

    Read the article

  • Remote desktop session ends abruptly with a "protocol error"

    - by Jon
    Intermittently we get a problem where a remote desktop session will get disconnected with the error message “Because of a protocol error, this session will be disconnected. Please try connecting to the remote computer again.” We are getting this with one server only which is running Windows Server 2008, connecting with Windows 7 clients. The session itself stays running, you just get disconnected, and you can try and reconnect. Sometimes you get in for a while then it will kick you out. We are connecting from Windows 7 clients. We have tried connecting using Cord on a Mac and this works fine, so it's not like the session itself is corrupted. One problem is that there are some critical applications running under the session (I know, let's not discuss the idiocy of that), so we cannot reset the session in any way during the working day – so any diagnostics must have minimum impact. Thanks, Jon

    Read the article

  • Get Our New Book: The How-To Geek Guide to Windows 8

    - by The Geek
    Lets face it, Windows 8 is a major change to Windows, and for many, quite confusing. Today we’re releasing our very very first book: The How-To Geek Guide to Windows 8, which is written to be easy enough for anybody to understand, but comprehensive enough for experts to enjoy. There’s over a thousand screenshots and pictures in the book to help you get the hang of navigating around Windows 8, and nearly a thousand pages of content so there’s nothing you won’t understand. Everything is covered in traditional How-To Geek style, with step-by-step instructions complete with pictures, more pictures, and even more pictures. There’s over a thousand pictures in this book! This book is priced very reasonably for a nearly thousand-page computer book, at only $9.99 on the Amazon Kindle store. We don’t use DRM, and you can use it on any device that supports Kindle—including reading it directly in your web browser. If you like How-To Geek, you’ll like this book. What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8 HTG Explains: Why You Shouldn’t Use a Task Killer On Android

    Read the article

  • Mapping an sFTP connection to a Windows drive?

    - by Nicolas
    I'm looking for a way to map an sFTP connection to a Windows (Vista) drive. In other words, a tool that would add a new drive (let's say N:) to my computer, that would directly point to my remote server via sFTP. That way, "N:\my_dir\file.txt" would actually be something like "/home/user/my_dir/file.txt" on the remote server. Reading the file on Windows would download it, and writing content in it would upload it...network transfers being made via sFTP. I'm aware of Novell NetDrive, but it has various issues with long filenames, and seems to corrupt UTF-8 files content depending on the BOM. Do you know about any reliable alternative ? Thanks ! Edit : I have complete control of the remote server, except that it's remote enough for me not to be able to physically access it.

    Read the article

  • From a quality perspective, what is better: Turning volume up in the software, in the OS, or on the speakers?

    - by Qqwy
    I kept thinking about this, and out of sheer curiosity, I decided to ask: If music isn't loud enough. How do I get the best quality?(Even if the difference is in fact so small it's neglectible) By making the music louder in my music player, game or other sound-producing software program. By raising the volume at the Operating System level (for instance, by clicking the 'speaker' icon on the windows bar and turning the volume up) By turning the volume up on the Amplifier or Speakers that are attached to your computer, and thus changing the volume on the 'hardware' Does programs vs OS matter? Does software vs. hardware matter? Thanks, Qqwy

    Read the article

  • Ubuntu 13.04 alongside Windows 8 - How to partition from Windows

    - by mengelkoch
    I plan to install Ubuntu 13.04 alongside Windows 8, and I'm looking for a CLEAR answer on how to conduct partitioning appropriately. I'm very new to all of this so a thorough explanation with minimal jargon would be great. I have an Acer Aspire M5 x64 with 6G RAM. I think I already figured out how to deal with the fast startup, UEFI and SecureBoot issues (I disabled fast startup and disabled Secure Boot). I am able to boot into Ubuntu from a LiveUSB, and I think I am ready to install Ubuntu. Note - despite some advice found here, I do have to disable SecureBoot to boot 13.04 from my LiveUSB. From what I have read here, it seems that I should (at least at first) create the partitions from WITHIN Windows 8, not from the LiveUSB, to avoid reported problems. I have run compmgmt.msc and I see the existing partitions. I see the following: Disk 0: 400 MB Recovery; 300 MB EFI System; Acer (C:) 444.95 GB (Boot, Page File, Crash Dump, Primary Partition); 20 GB Recovery Disk 1: 3.74 GB Primary Partition; 14.90 GB Primary Partition I gather I need to create a mounting point '/' Partition (??), a swap partition, and a home partition. Please explain what these are, how big they should be, how I create them from Windows Disk Management, and anything else I need to know. Eventually, I plan to fully replace Windows 8 with Ubuntu, but for now I want to run alongside Windows 8 and not screw things up. I don't have any critical files saved on this computer yet. Thanks.

    Read the article

  • no boot menu or / mount point after installing Ubuntu 12.04

    - by Liz Kaiser
    I've installed Ubuntu 12.04 using a Live CD to a new Gateway computer with Windows 7. I used "Install Alongside Windows" option. But on restart there was no boot menu. It only starts into Windows. I looked at partitions using GParted (with Live CD) and it shows my new Ext 4 partition for Ubuntu as follows sda4 Extended, sda5 Ext 4, sda6 linux-swap But there is no / Mount Point listed for the sda5 partition. I did try Boot-Repair but it did nothing. So I've got 2 problems: no GRUB menu and no / Mount Point for my ext 4 partition. I'm so exasperated. Do I have to edit the fstab file to create a / mount point? (And that prospect really scares me.) And if I do, could someone give me step by step instructions. In order to avoid this detailed and scary stuff in the Terminal (which I really do not know very much about), I deleted the ubuntu partitions and started all over installing 12.04 again. But I'm left in the exact same situation now. Thanks for any help you all can provide. Is there an easy way out of this?

    Read the article

  • Cannot access to any Windows share including localhost

    - by user21936
    I can't access any share from my operating system, including \\localhost and \\127.0.0.1. I have Windows 7. NetBIOS over IP is enabled, other computers in the network can access my shares and other computer's shares, but my operating system cannot access any share. I have installed Windows XP within VMware, and the virtual Windows XP can access all shares including the host shares. I can communicate in other ways like TCP, HTTP and gaming, but not access shares. How to solve this problem?

    Read the article

  • i[Pod|Phone|Pad|*] backups in iTunes

    - by Maroloccio
    iTunes <- iPhone. At sync time, a back-up is performed. Which data is included, which data is not? i.e. are songs (potentially redundant) backed-up so that a computer ends up having both the source file on the filesystem and the copy within the device back-up? Is anything on the iPhone filesystem not backed up? (i.e. on a Mac using Time Machine, some files are excluded from the back-up even if not all of them can be recreated upon restore - I lost my postfix config this way..)

    Read the article

  • Interaction .asp with .swf flash - good on IIS6, bad on IIS7

    - by gial
    Hi, all! I can't make my app work after migration from IIS6 to IIS7. Problem is described below. My app: in my app I use 'flash.swf'. This .swf appeals to .asp, which contains only: Response.write "<myNode>test_is_ok</myNode>" .swf must get it and show "test_is_ok". And it is really ok on IIS6 2003, but on IIS7 2008R2 .swf shows me "undefined". Situation: Separate request from IE to .asp gets "test_is_ok" on both computers. If .swf from one computer appeals to .asp on another - nothing works. If I delete .asp, then .swf also shows "undefined", so I think it don't really appeals to .asp on IIS7. Suggest me, please, something, what can help.

    Read the article

  • Is the 4-pin PSU connector required? (Trying to connect a PSU to a mini case.)

    - by Geeks On Hugs
    I am trying to build a computer, placing an ASUS P8H67-I DELUXE in a custom retro C64 case. The case is an extra small form factor which can accomodate the Mini ITX board, but requires an external power supply, similar to the power-bricks that laptops use. I am looking at different power supplies and like these, but cannot figure out whether/how to power this system because they provide a 24-pin connector, but the motherboard has a 4-pin connector as well. Is the 4-pin connector optional or is it required? If it is required, how can I provide power for this system?

    Read the article

  • SQL SERVER – FIX ERROR – Cannot connect to . Login failed. The login is from an untrusted domain and cannot be used with Windows authentication. (Microsoft SQL Server, Error: 18452)

    - by pinaldave
    Just a day ago, I was doing small attempting to connect to my local SQL Server using IP 127.0.0.1. The IP is of my local machine and SQL Server is installed on the local box as well. However, whenever I try to connect to the server it gave me following strange error. Cannot connect to 127.0.0.1. Login failed. The login is from an untrusted domain and cannot be used with Windows authentication. (Microsoft SQL Server, Error: 18452) The reason was indeed strange as I was trying to connect from local box to local box and it said my login was from an untrusted domain. As my system is not part of any domain, this was really confusing to me. Another thing was that I have been always able to connect always using 127.0.0.1 to SQL Server and this was a bit strange to me. I started to think what did I change since it  last time I connected to SQL Server. Suddenly I remembered that I had modified my computer’s host file for some other purpose. Solution: I opened my host file and immediately added entry like 127.0.0.1 localhost. Once I added it I was able to reconnect to SQL Server as usual. The location of the host file is C:\Windows\System32\drivers\etc. You will find file with the name hosts in it, make sure to open it with notepad. If you are part of a domain and your organization is using active directory, make sure that your account is added properly to active directory as well have proper security permissions to execute the task. Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Error Messages, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Installing Ubuntu on Asus G75VW (UEFI)

    - by user101653
    You all are my last hope... help! I bought an Asus G75VW from Best Buy. It has the new UEFI BIOS instead of the old style BIOS (1980's) and has Windows 8 preinstalled. I cannot get the G75VW to install Ubuntu 12.10 in EFI mode. I did get Ubuntu to load if I changed the BIOS to CSM and the computer sees and installs Ubuntu in "legacy mode". I attempted boot repair, and Ubuntu will load after 1 minute but as legacy BIOS only. If I changed the BIOS to UEFI "Binary is whitelisted" is displayed and I get a purple screen. My goal... keep my preinstalled Windows 8 on internal drive bay 1 and install Ubuntu 12.10 on internal drive bay 2... and somehow make a choice on which to choose. I am at a loss. I am a software programmer, but I am very bad at understanding BIOS and partitioning. Any ideas? Has anyone done what I want to do. This is a full second day on my "issue"! If I cannot get Ubuntu installed, I'm returning the laptop. And "wait" until these obstacles of UEFI/EFI and properly handled to allow people to load EFI based Ubuntu without a hitch. Thanks, Dave

    Read the article

  • Timeouts when connecting to SQL Server since installing SP1 for Windows 7

    - by Julien
    Hi, I just installed SP1 for windows 7 and I have severe performance degradation when connecting to SQL Server 2005 since then. Establishing connection takes more than 30 seconds while it's instantaneous on another computer. Firewall is disabled and I didn't make any change to the configuration. It happens both when trying to connect with a hostname and with an ip address. Everything else seems to be fine (for instance, I'm have no issue connecting to other computers with remote desktop) What can cause such a problem? Thanks in advance! Edit : uninstalling the SP1 solves the issue instantly.

    Read the article

  • Configure IIS 6 to deny access to specific file based upon IP address

    - by victorferreira
    Hello guys, We are using IIS 6 as our webserver. And we need to deny the access for one specif file, placed in only one specific URL, to everybody OUTSIDE the local network. In other words, if somebody is trying to access that filme/page from their own computer at home, using the internet, they must not succeed. But, if the same person try to do that at the same network of the web server, its ok. I am not sure about that, but Apache uses ORDER DENY,ALLOW. You specify the URL, allow or deny to all or to a range of IP. Any suggestions? Thanks!

    Read the article

  • How to prevent Windows Home server waking for backup

    - by Andronicus
    Since changing the motherboard in my Windows home server it has been switching itself on every night to perform a scheduled backup. I don't want this to happen though, I want to switch the server on using Wake on lan, but I want to manually perform backups if/when required. I know I can disable backups of each computer, and the machine wont turn on, but I want to allow manually triggered backups, or automatic backups if the homeserver is on, but if its in sleep mode, I wish it to stay in that state unless I wake it. How can this be achieved?

    Read the article

  • Botting from a stick drive

    - by Zap
    Am trying to boot from a usb stick. Have carefully followed the instructions at the following link and successfully downloaded and installed version Ubuntu 12.04 desk top: http://www.ubuntu.com/download/help/create-a-usb-stick-on-windows I used the Universal-USB-Installer-1.9.0.2 as instructed and choose the "Ubuntu 12.04 desk top" option, after downloading the respective iso/zip file onto my Dell laptop from the Ubuntu site. Also modified my bios to select the usb first as boot drive instead of hard drive. Also, turned off bit blocker on my laptop and usb stick. Usb stick has the setting of "Automatically unlock this drive on this computer". When i reboot my laptop, it first boots into a black screen (i assume is the bios), but prompts saying "Remove disks or other media. Press any key to start". I press any key and regardless the laptop boots up to windows. Hence, it appears that the boot process is checking the USB first before going to the hard drive to look for it's boot disk and starting Windows 7. Is it that the USB stick is not correctly configured with Ubuntu as a boot disk? Is there anything else that i need to do besides the instructions at the following link? http://www.ubuntu.com/download/help/create-a-usb-stick-on-windows How can I ensure that USB boot stick is configured correctly? After running the Universal-USB-Installer-1.9.0.2 to "install" Ubuntu, is there additional configuration/installation steps? What is the first file that the bios would look for on this USB drive? Is this configured somewhere in the bios, or would it just look for an grub file or /boot dir? The only message i get when booting is "Remove disks or other media. Press any key to start". Any and all help would be much appreciated.. Thanks ... :)

    Read the article

  • My D-Link Router is only allowing one connection

    - by Blaze
    My Router (Model: DI-624) is only allowing one wireless connection to one laptop. The other laptop is stuck hanging at connecting to the Internet I have the SSID set as "Pedro-Home" and is using a WPA PSK secured password. I have set the router using "Blaze-PC" while wired. Both Laptops critically need the Internet. > Dynamic DHCP Client List > > Host Name IP Address MAC > Address Expired Time > Blaze-PC 192.168.0.100 70-f1-a1-ff-39-a8 Apr/21/2011 17:49:14 > pedro 192.168.0.105 00-26-82-c8-47-25 Apr/21/2011 17:50:05 <<This computer isn't connecting.

    Read the article

  • How to disable a McAfee service?

    - by AngryHacker
    I am trying to disable a McAfee Real-Time Protection service, but if I go into Services/Properties, then try to set it to Manual or Disable - it says that unable to open service McShield for writing on Local Computer. Error 5. Access is denied. I've tried logging in as an Admin, to no avail. I've tried resetting permissions in the registry to the key where the McAfee service is described...nothing helped. Logging in with Safe Mode did not help either. How can I disable this service? Is there a way to disable a service before even getting into Windows? P.S. Uninstalling McAfee is not an option.

    Read the article

  • Keyboard causing freezes

    - by fluteflute
    My problem started on Windows XP: a computer (that was working fine for many years) had a problem, that I can't quite remember (may have been to do with the startup process) - but I solved it by swapping the keyboard with one on another machine. Now for several years the problematic keyboard has been working fine - on my main machine that runs Ubuntu. I also dual boot Windows XP - and have had no problems on either OS. However I recently installed Ubuntu 11.04 Natty (pre-alpha) and found that any keyboard press causes freezes. (All still works fine on Ubuntu 10.10 and 10.04 and Windows XP) Just wondering why I might be experiencing this? Seems strange to me that's its not consistent.

    Read the article

  • Get-QADComputer -LdapFilter & NOT operator

    - by dboftlp
    I'm having issues excluding an OU from my LDAP filter $DaysAgo = (Get-Date).AddDays(-31) $ft = $DaysAgo.ToFileTime() Get-QADComputer -SizeLimit 0 -IncludeAllProperties -SearchRoot 'DC=My,DC=Domain,DC=Local' -LdapFilter "(&(objectcategory=computer)(lastLogonTimeStamp<=$ft) (!(ou:dn:=DisabledPCs))(|(operatingsystem=Windows 2000 Professional) (operatingSystem=Windows XP*)(operatingSystem=Windows 7*) (operatingSystem=Windows Vista*)(operatingsystem=Windows 2000 Server) (operatingsystem=Windows Server*)))" I'm looking to query for all Windows OS systems that haven't logged in to AD for more than 31 days & that are not already in the OU "DisabledPCs", which is where I'll be moving them to. When I run it now, I'm getting all the systems I'm looking for, including those in the "DisabledPCs" OU... I've tried several variations including: (&(!(ou:dn:=DisabledPCs))) As well as putting it in different locations in the filter (not that I thought it would make a difference, but I obviously don't know that...) Thanks in advance for any help, -dboftlp

    Read the article

< Previous Page | 468 469 470 471 472 473 474 475 476 477 478 479  | Next Page >