Search Results

Search found 15646 results on 626 pages for 'port 80'.

Page 473/626 | < Previous Page | 469 470 471 472 473 474 475 476 477 478 479 480  | Next Page >

• How to give virtual machine access to the Internet, but block from LAN?

  - by Pekka

  I am setting up a virtual machine using Microsoft Virtual PC in Windows 7. The VM will run a Windows XP. I want to set up a public-facing server in it for web pages, subversion and other things, and instruct the router to port forward any requests to that Virtual Machine. I managed to do that - I assigned the VM to the network adapter, and it is now acting as just another DHCP client - but to increase security I would like to block the VM from the rest of the LAN, so it accepts only incoming connections from the Internet. For this to be effective in case of a compromise, it would have to happen on VM level as far as I can see. Can this be done?

  Read the article

• How can I fix my Virtual PC 2007 network configuration

  - by DanJ

  Hi, I have installed Windows Virtual PC 2007 on my Windows 2003 R2 Server. I have installed a virtual Windows XP. I have configured the virtual PC to use Shared Networking (NAT) I have disabled the firewall on the virtual windows XP The problem: I am unable to PING from Windows 2003 (the host) to the Windows XP (virtual) I do have normal traffic from the virtual to the internet Could this problem be related to routing? How I can I fix this network configuration to allow for the following traffic: 1. From Virtual to Internet 2. From Host to Virtual 3. If possible, from Internet to Virtual on pre-defined ports (port forwarding?) Thanks

  Read the article

• failing to achive tunneling to fresh ubuntu 10.04 server

  - by user65297

  I've just set up a new 10.04 server and can't get the tunneling to work. local machine > ssh -L 9090:localhost:9090 [email protected] login success, but thereafter trying tunnel from local browser, http://127.0.0.1:9090 echo at server terminal: channel 3: open failed: connect failed: Connection refused auth.log sshd[24502]: error: connect_to localhost port 9090: failed. iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Trying 9090 at server (links http://xx.xxx.xx.xx:9090 works) sshd_config is identical to previous 8.04 server, working fine. What's going on? Thankful for any input. Regards, //t

  Read the article

• Can't connect using Jail SFTP account

  - by Fazal

  I've been following this tutorial "Limiting Access with SFTP Jails on Debian and Ubuntu" and whilst I've had no errors setting it up, I've had issues on Ubuntu 10.04LTS logging in as a user on a virtualhost. I've changed my SSH port to 22022, and enter all the credentials when attempting to login. I ran these commands to add a user to the virtualhost: # useradd -d /srv/www/[domain] [username] # passwd [username] # usermod -G filetransfer [username] # chown [username]:[username] /srv/www/[domain]/public_html I should add that this is the only time I've setup the user they have no other /home directories or such. The directory that does exist is at /srv/www/example.com/public_html When I try using a desktop package such as cyberduck to login to the site, I keep getting a "Login failed with this username or password". I am completely lost as what to do next... The reason why I'm trying this method is because I want my clients to use SFTP and not FTP to upload files to their websites. Any help or direction is appreciated.

  Read the article

• set proxy for vpn server on ubuntu server 12.4

  - by Morteza Soltanabadiyan

  I have a vpn server with HTTPS, L2TP , OPENVPN , PPTP. i want to set proxy in the server so all connection that comes from vpn clients use the proxy that i set in my server. I made a bash script file for it , but proxy not working. gsettings set org.gnome.system.proxy mode 'manual' gsettings set org.gnome.system.proxy.http enabled true gsettings set org.gnome.system.proxy.http host 'cproxy.anadolu.edu.tr' gsettings set org.gnome.system.proxy.http port 8080 gsettings set org.gnome.system.proxy.http authentication-user 'admin' gsettings set org.gnome.system.proxy.http authentication-password 'admin' gsettings set org.gnome.system.proxy use-same-proxy true export http_proxy=http://admin:[email protected]:8080 export https_proxy=http://admin:[email protected]:8080 export HTTP_PROXY=http://admin:[email protected]:8080 export HTTPS_PROXY=http://admin:[email protected]:8080 Now , i dont know what to do to make a global proxy for server and all vpn clients use it automatically.

  Read the article

• Routing to various node.js servers on same machine

  - by Dtang

  I'd like to set up multiple node.js servers on the same machine (but listening on different ports) for different projects (so I can pull any down to edit code without affecting the others). However I want to be able to access these web apps from a browser without typing in the port number, and instead map different urls to different ports: e.g. 45.23.12.01/app - 45.23.12.01:8001. I've considered using node-http-proxy for this, but it doesn't yet support SSL. My hunch is that nginx might be the most suitable. I've never set up nginx before - what configuration do I need to do? The examples of config files I've seen only deal with subdomains, which I don't have. Alternatively, is there a better (stable, hassle-free) way of hosting multiple apps under the same IP address?

  Read the article

• Windows 2003, MySQL 5.0.24, Windows Updates causes problems with MySQL?

  - by Alessandro

  Hi, our Windows 2003 webserver has 2 GB of ram and MySQL v. 5.0.24-community-nt. Maybe due to Windows Updates (is it possible??) I've problems with MySQL databases. I should restart everyday IIS services. Events: "Changed limits: max_open_files: 2048 max_connections: 800 table_cache: 619" "Do you already have another mysqld server running on port: 3306 ?" "Can't connect to MySQL server on 'localhost'" 10055 Should I increase the innodb_buffer_pool_size, from 250M to 500M? Or/and? Thanks

  Read the article

• Canot send SMS using gammu-smsd

  - by khalid hussain

  I am trying to send SMS using gammu-smsd, but it does not work. Modem: Huawei E1550 Steps: #vi /etc/gammu-smsdrc port= /dev/ttyUSB0 connection = at Then restarted gammu-smsd: # /etc/init.d/gammu-smsd restart SMS Sending test echo "Test message" | gammu-smsd-inject TEXT 335123456 It does not send SMS. Log Sep 27 14:19:25 Dell-Laptop gammu-smsd[10285]: Going to 30 seconds sleep because of too much connection errors Sep 27 14:19:55 Dell-Laptop gammu-smsd[10285]: Starting phone communication... Sep 27 14:19:55 Dell-Laptop gammu-smsd[10285]: Error at init connection: Error opening device, it doesn't exist. (DEVICENOTEXIST[4])

  Read the article

• datacenter network change control best practices

  - by jpolache

  I have been tasked with compiling a list of possible network equipment changes at a data center. The task includes tagging which changes need change control and which don't. Does anyone know of a "best practices" list that I can start from? The methods for doing change control at this data center are well established. The list would be of specific configuration items that should or should not be included in the change control process, of example; static route entries switch port assignments firewall rule additions/changes etc.

  Read the article

• 1Gigabit vs 1.25Gibabit mismatch

  - by Joel Coel

  I need to re-connect the network to a small old outbuilding that hasn't been used in several years. I have to use the existing 62.5um multi-mode fiber run. This end of the fiber is already connected. For the end in the building, I was looking at this pair: http://www.tp-link.com/products/productDetails.asp?class=switch&content=spe&pmodel=TL-SM311LM http://www.tp-link.com/products/productDetails.asp?class=&content=spe&pmodel=TL-SL2210WEB If you look at the sfp first (first link), it's listed at 1.25Gpbs. That's odd, because IIRC the fiber should really only do 1Gbps. It's also supposed to work with the switch I posted (2nd link), but the gbic port on the switch also only shows 1Gbps. What am I missing here?

  Read the article

• Can't communicate using PuTTY, but can with Termite

  - by SharpHawk

  I'm trying to establish a serial connection to a peripheral from my PC's RS-232 port. Pretty simple stuff, and I've had not trouble doing it with countless peripherals before. And yet when I configure PuTTY to the right baud rate, stop bits, etc. I'll type in "*IDN?", press enter, and the unit won't reply. After going over my settings over and over again, I decided to try another terminal program, Termite. This time it worked like a charm. What puzzles me, and what I'm trying to figure out by posting this question, is why Termite would work when PuTTY did not despite the fact that they both have the same settings. PuTTY: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Termite: http://www.compuphase.com/software_termite.htm EDIT: I now tried Tera Term as well, and it works. So PuTTY is the odd one out.

  Read the article

• What ports do I need open for IMAP connections

  - by iamjonesy

  I'm developing a web application that connects to an IMAP mailbox and fetches emails as part of it's functionality. The application is PHP and I'm connecting like this: public function connect() { /* connect to gmail */ $hostname = '{imap.gmail.com:993/imap/ssl}INBOX'; $username = $this->username; $password = $this->password; /* try to connect */ $this->inbox = imap_open($hostname,$username,$password) or die('Cannot connect to Gmail: ' . imap_last_error()); } Developing locally on my mac this was fine, I was able to connect and get emails. However now that I've put the app on my web hosts server I'm getting the following error: Cannot connect to Gmail: Can't connect to gmail-imap.l.google.com,993: Connection timed out After checking with my hosting provider they told me outgoing connections on port 993 are blocked. Is there anyway around this? Otherwise I need to upgrade to a dedicated server :S

  Read the article

• Belking Wireless Router unable to connect to internet although wireless connection is working

  - by ptamzz

  I have a Belkin Basic N150 Wireless router. I'm trying to set up wireless connection using the wired ports my university has provided in my hostel room. Usually, when I connect my laptop using a LAN wire through the port, my settings are like IP: 10.5.130.X Subnet Mask: 255.255.254.0 Default Gateway: 10.5.130.250 DNS Server: 10.200.1.11 and I'm able to connect to the internet. Now instead of connecting my laptop directly, I've connected the lan wire to the Belkin Wireless Router, set the router as "Use as an Access Point" and in the IP field, I've put up 10.5.130.1. Now I've set the IP of my system manually to 10.5.130.3. I'm able to connect to the wi-fi but I'm still not able to connect to the internet. What am I missing?

  Read the article

• How to configure catch-all in Exchange2010 hub-transport environment?

  - by Itay Levin

  Im getting the delivery failed from the post master reply. i don't want it. because then poeple can find out all my real users on the exchange. also, i have a lot of users (10K) in my application - and i don't want to create a mailbox for each user. is it possible to get this done in ex2010 sp1. hub-transport configuration? or i must use edge-transport as indicated in http://technet.microsoft.com/en-us/library/bb691132(EXCHG.80).aspx

  Read the article

• Connection to mysql server in SYN_SENT

  - by Sunil

  We are facing a strange problem from last few days between our application server and database server(Mysql): connection to database server from application server hangs in SYN_SENT state and after that we are not able to make any connection to database server on mysql port(3306). When we checked the netstat output on database server its in SYN_RECV state. What I can figure out is mysql server is receiving the SYN request and responding also and its not reaching to the client hence SYN_RECV at server side and SYN_SENT at client side. I think SYN_SENT state should go after some time and because of this other db connection attempts to same server should not hang. Does anybody have any idea how can we resolve this issue? Out setup details : Application server: RHEL 5.4, kernel-release = 2.6.18-164.el5, x86_64 Database server: Mysql Version : 5.1.49 RHEL 5.4, kernel-release = 2.6.18-164.el5, x86_64

  Read the article

• How to create a virtual input in windows from an audio stream

  - by Brian

  Great to find this forum full of knowledge. I was wondering if anyone knew of an application or other work around to create a virtual input device in windows. I have a IP cam app on my android phone, that I would like to use for skype webcam. It comes with a port for getting the video feed into skype, and that works great. However, the only audio available, is a OGG stream. Both video and audio work great with media players such as VLC etc, but ot with skype, since skype only works with windows input devices. Is there such software outthere, in which I could simply name my audio stream address, and pipe that to a virtual input device to allow skype to find it?

  Read the article

• High availability for Windows Service under Windows Server 2003

  - by empi

  Hi. I have a following situation: I need to deploy a windows service that listens for incoming request on tcp port (basically WCF service). I have a High Availability requirement - the service must be deployed on two servers and if the service stops (only the service, not the whole server) on one server, all the requests must be redirected to the second one. For me it looks like a basic failover scenario. How can I achieve this on Windows Server 2003? Should I use Microsoft Cluster Service or Network Load Balancing? The important part is that the process of swapping the servers should not concern the clients (the client must see only single address / single host or domain name). Thanks in advance for help.

  Read the article

• setting up delegate or smtp forwarding

  - by cotiso

  for work we have a remote dedicated server to run our webservice that also runs our email services, at home(comcast residential internet) i cannot send mail using the dedicated server's SMTP, comcast spits back a error saying i can only use their SMTP server for sending mail at work(comcast business internet) we can use our dedicated server for sending mail with no problem so i set up a box at work to forward smtp traffic, i'm new to all this networking stuff by the way i used delegate to forward smtp traffic, can someone point me in the right direction on how to use this program(delegate) to fix our issue the delegate command i used to test is : delegated -P25 SERVER="smtp://dedicated.server.com:25" PERMIT=":::" -v i also opened up port 25 on the router so it points to my boxes ip are there any other ways to fool comcast into thinking im using my works ip to send mail, my coworkers and i are unable to send mail from home for some time now thanks

  Read the article

• Radeon HD 5770 - DisplayPort Problem

  - by Nick Schmit

  I am trying to set up 3 monitors with the Radeon HD 5770 I recieved a few days ago. I have read that I can use 2 DVI ports and an active DisplayPort adapter for a third DVI monitor. I have purchased this adapter: http://www.accellcables.com/products/DisplayPort/DP/dp_dvid.htm I have the two normal DVI monitors working, but when I try to extend the display to the third, I get a message saying the system has detected a problem with the connection through the display port which may limit resolution/refresh rate. I know that all the cables are fine, I have replaced the adapter, the monitors all work, I have tried different monitors through the adapter, and even nothing but the adapter, but I cannot get any monitor to work using it. I am trying to use 2 Dell monitors and an Acer. Have I overlooked something? Is there a compatibiliy issue I missed? Any suggestions as to what I could try? Thanks in advance.

  Read the article

• 2 x Netgear GS724T (Dual GBIC) trunking issue

  - by Arthor

  I have the following: Netgear GS724T (Firmware Version V1.0.3_35, Protocol Version - 2.001.002) 4 x Indineon ISFP GBR/FC Settings STP Function - Enabled Fast Link - Enabled Trunking port 23,24, (21,22 - RJ45 cables, but not connected.) I have connected both switches via 2 fiber cables and want to use trunking. The problem I am having. Sometimes I get a an issue when none of the switches cannot talk with each other, nor the devices, sometime they can. The problem is irregular and no patten can be determined The statistics shows that when the switches does not work, they have RX errors If I remove one to the GBIC connections, then everything works as normal.] Question Does anyone have a solution for this please? Thanks

  Read the article

• OS X 10.7.5 - telnet: connect to address 10.0.0.12: Operation not permitted

  - by user2169619

  I have troubles to connect from macos to reach windows shares and I hit some general problem with my macos. When I try to telnet to 445 port to my windows share server the macos throws "Operation not permitted". I have no firewall rule and I'm not able to google anything. sh-3.2# telnet 10.0.0.12 445 Trying 10.0.0.12... telnet: connect to address 10.0.0.12: Operation not permitted telnet: Unable to connect to remote host Any idea what can be the reason?

  Read the article

• Computer not displaying anything

  - by Justen

  The computer in question worked last week. It's brand new, never been connected to the internet, up-to-date parts, etc. Last week, I installed some 3D software on it, then shut it down and waited for the license files that arrived this week. I've done this to 4 other PCs with the same hardware and software. I've tried: Hooking it up to 3 different monitors using different video cables 2 other graphics cards and a handful of other things like switching which port it's plugged into before and after a restart. I have the driver disc, and a windows reinstallation disc, but they won't do me any good because no display at all for any interval of time. All the fans are moving: psu, gfx, cpu etc, so I don't believe it's a power issue. Here are the specs I know of: 4GB RAM 8800 GTX 700w PSU Intel dual core (not sure of model) Anyways, I'm open to ideas.

  Read the article

• Setting up a router as a DNS server only

  - by Jacob R

  I have a Linksys WRT54GL router that I don't need anymore, since I had to buy a 3G capable router (Dovado 3GN). As I only have a 3G connection at home, I want to optimize it as much as possible. I want to setup a caching DNS server, including some blacklisting of ad domains. The router currently runs the DD-WRT firmware. Is it possible to use this router as an ordinary computer, running only a DNS server, disabling all other features such as DHCP, WLAN, etc? Connecting it to my other router, should I simply run a cable into the WAN-port of the Linksys router?

  Read the article

• How to configure fastcgi with lighttpd

  - by silverburgh

  Hi, I am trying to configure FastCgi with ligttpd server. I was able to run vanilla lighttpd like this: ./lighttpd -f lighttpd.conf And then I compile/install the source of fastcgi, and I add the following in my lighttpd.conf: fastcgi.server = ( "/fastcgi_scripts/" => (( #"host" => "127.0.0.1", #"port" => 9091, "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", "docroot" => "/" # remote server may use # it's own docroot )) ) But lighttpd won't start after I add the above. Can you please tell me how can I run fastcgi with lighttpd? I want to use a c program with fastcgi with lighttpd. Thank you.

  Read the article

• Numlock on when computer is off

  - by George Duckett

  I have a desktop PC which was recently moved. Since moving I've noticed that even while the PC is turned off (but wall socket turned on) the NumLock LED on the keyboard is on. It may have been doing this before the move, but I've only noticed it now. Maybe it matters that the keyboard is connected via a shared mouse/keyboard PS/2 port and I'm running Windows 7. I've not checked whether the LEDs are just keeping whatever state they were in when I turned the PC off but will do this if that information could be relevant. Why does the led stay on when the PC is turned off and how can I prevent this?

  Read the article

< Previous Page | 469 470 471 472 473 474 475 476 477 478 479 480  | Next Page >