Search Results

Search found 53261 results on 2131 pages for 'system state'.

Page 473/2131 | < Previous Page | 469 470 471 472 473 474 475 476 477 478 479 480  | Next Page >

• Can't get port forwarding to work on Ubuntu

  - by Znarkus

  I'm using my home server as NAT/router, which works well. But now I'm trying to forward port 3478, which I can't get to work. eth0 = public interface eth1 = private network $ cat /proc/sys/net/ipv4/conf/eth0/forwarding 1 $ cat /proc/sys/net/ipv4/conf/eth1/forwarding 1 Then to forward port 3478 to 10.0.0.7, I read somewhere that I should run iptables -t nat -A PREROUTING -p tcp -i eth0 --dport 3478 -j DNAT --to-destination 10.0.0.7:3478 iptables -A FORWARD -p tcp -d 10.0.0.7 --dport 3478 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT I also ran ufw allow 3478 But testing port 3478 with http://www.canyouseeme.org/ doesn't work. Any idea what I have done wrong?

  Read the article

• How to output to S-Video on Windows XP in single-monitor mode (clone display)?

  - by Jephir

  I am using an IBM ThinkPad T30 running Windows XP. It is connected to a TV system via S-Video output. Windows is currently set up in multi-monitor mode with monitor 2 being output to S-Video. However, since there is no preview monitor, I can't interact with anything I drag to monitor 2 as I can't see it. I would rather have the system set up so that there is only one monitor and the output is cloned to the laptop display and S-Video. This allows me to see what I'm doing on the TV system. Is this possible?

  Read the article

• What data should I (can I) gather to prove a .net bug in third party software?

  - by gef05

  Our users are using a third-party system and every so often - a user might go all day without this happening, other days they may see it two or three times in seven hours - a red x will appear on screen rather than a button, field, or control. This is a .net system. Looking online I can see that this is a .net error. Problem is, our devs didn't write it, and the vendor wants proof that the problem resides with their system, not our PCs. What can we do to gather information on such an issue that would allow us to make our case to the vendor and get them to create a fix? I'm thinking of data to gather - anything from OS, memory. .net version installed etc. But I'd also like to know about error logging - if it's possible to log errors that occur in third-party systems.

  Read the article

• OS Isolation: Virtualization or Dual-Boot Duplication, a General How To?

  - by Mr_CryptoPrime

  I want to isolate my windows 7 operating system and I have looked into virtualization. This should work with Linux, however, I do want to still have a way to run windows 7 securely, but without significant performance loss, thus eliminating virtualization for that. I know that you can dual boot because I currently do so with my XP/Linux system. Is there a way that I can duplicate my windows 7 system so I can select one at bootup? This way I can ensure that each OS is isolated and not worry about performance loss. However, I am having a lot of trouble finding a solid method for OS duplication?! Is this even possible or must I buy two versions of win7 and somehow install them separately? Any information regarding this would be helpful, thanks! Essentially I want, Two instances of win7 (not necessarily simultaneously running) Each are isolated from one another so that a security breach in one doesn't affect the other. There is no performance loss in either from doing so

  Read the article

• Adding custom script on ESXi 5.0

  - by Quzar

  I have an ESXi server that I would like to have run a custom script on every boot that contains esxcli and other commands. I have tried adding the script into init.d and creating an rc.local.d folder with a script, but the etc folder gets rebuilt on startup. I've also tried modifying state.tgz and local.tgz in the /bootbank folder in order to force these files to appear, but that does not seem to work either. Is there any way I can run custom commands on boot? Note: I've tried the advice here ESXi boot process / state storage to no avail. Seems the system was changed between 4.1 and 5.0

  Read the article

• What PowerShell/WSMan clients or queries are consuming more than 1000 requests per 2 seconds?

  - by makerofthings7

  Exchange 2010 remote administration tools are complaining with the following error [txexmb02.ibm.com] Connecting to remote server failed with the following error message : The WS-Management service cannot process the request. The system load quota of 1000 requests per 2 seconds has been exceeded. Send future requests at a slower rate or raise the system quota. The next request from this user will not be approved for at least 558475776 milliseconds. For more information, see the about_Remote_Troubleshooting Help topic. + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportException + FullyQualifiedErrorId : PSSessionOpenFailed VERBOSE: Connecting to TXEXHC02.ibm.com The help document this error referrers to says this is a WS-Man error. We're running SCOM 2007 R2 and am thinking that is increasing the query count, but I need to prove it.

  Read the article

• Linux Permissions

  - by Tres

  I am running Fedora 12 and I've setup a partition separate from my root partition to keep shared files and home directories. Now, I've been having permission issues where it says the user cannot chdir into their home directory (/files/home/*). Now, I fixed this originally by chmodding / to 0755 and the home directories also to 0755. And yes, the user is the owner:group of their home directory. Now get this, I didn't change a thing, rebooted, everything still works. Great, right? I boot the server up a day later, and now same ol issue. This is a home server that wasn't on at all at any point in between the working state and non-working state. Also, nothing else was modified. Any ideas? Thanks!

  Read the article

• Why can't I use %USERPROFILE% in %PATH%?

  - by Zano

  On my Windows 7 machine, using the System Properties Environment Variables tool, I try to add %USERPROFILE%\Bin to the system variable PATH. For some reason, that doesn't work, even though %SystemRoot%\system32 works fine. When I try to run commands from the console, files in my Bin folder are not found, even though files in the System32 folder are found. The only difference between UserProfile and SystemRoot that I can see is that the former is a user variable while the latter is a system variable. I i write echo %USERPROFILE%\Bin it yields c:\Users\zano, and if I add c:\Users\zano\Bin explicitly, everything work fine. What's the problem here?

  Read the article

• How can I reset windows 7 file permissions?

  - by ssb

  I looked at this post and it seemed to be close to what I want, but my case might be a little worse: How can I reset my windows 7 file permissions to a rational state? Basically a while back I (very stupidly) changed the permissions on all sorts of system folders, and eventually rendered my computer virtually unusable. I managed to hack administrator privileges back onto key folders and getting it working, but in doing so I only modified permissions a lot more away from the natural state. I'm looking at this icacls stuff, but ultimately I need to reset EVERYTHING back to what it was in The Beginning, before I messed with it, from the C: directory all the way down. Right now application data is what's giving me problems, and I can't get it to work no matter how much I fiddle with those specific permissions. I will be forever grateful for help on how to do this without having to reformat.

  Read the article

• Disabling the shell of user "daemon" (/bin/false)

  - by BurninLeo

  on a Linux system there are lot's of users by default: daemon, bin, sys, games, etc. According to my /etc/passwd most of these users have a shell assigned (/bin/sh) which seems some kind of insecure to me. My naive thinking would say: Only give those users a shell that may login to the server. Is my thinking wrong? If not completely wrong: Can I disable the shell for "daemon" and "www-data" without having side effects (e.g. the system wont start or the Apache PHP cannot excute system calls)? Thanks for your hints!

  Read the article

• Tomcat Apache not working on Win7

  - by Javanator

  I have installed Tomcat Apache 6.0 onto my system after downloading it from http://tomcat.apache.org/download-55.cgi using the Windows installer I install the system. But after successful installation the service doesn't start. Stating an error like follows: Windows could not start the Apache tomcat on Local Computer, For More Information, review the System Event Log. If this is a non microsoft service, contact the service vendor, and refer to the service specific error code 0 I then try to install the same installer on Win XP and it worked. Don't know how to resolve this problem and how to get it started on Win7. Any help would be appreciated. Thank you.

  Read the article

• Applications on my laptop crashees every 10-20 minutes [closed]

  - by user1731110

  In my windows 7 home premium, several of my application crashes after some minutes even wehn I am not touching system. For example I have outlook 2007, that works fine, but suddenly crashes. The same about visual studio 2012. It is also crashes after some minute no matter if I am working on a project or I am not touching it. the same behaviour is there, for other applications (skype, oovoo and ...). I use Microsoft security essential and there is no virus on my system. I also checked my system with Sophos anti root kit and there is no root kit there. What would be the problem?

  Read the article

• RHEL 6 x64: running 32 bit applications

  - by user54614

  We develop an application which currently works in 32 bit mode only. It worked fine in RHEL 5 but failed to work in RHEL 6. The reason is RHEL 6 by default is installed with 64 bit libraries only. Moreover, we didn't find a way to choose installation of 32bit runtime environment during or after system installation. Of course, we did find a way to install three rpm packages with 32 bit libraries required for our application to work. But it looks like unpleasant for our customers (we have to install three rpms from the DVD in the command line). So the question is: Is there a convenient way for RHEL 6 customers to install 32 bit libraries it their RHEL 6 system? Say, any user-friendly item in menu or a special command that install the same set of 32 bit system libraries that existed in RHEL 5? What are best practicies in such cases?

  Read the article

• Nginx works on my linux machine but is not accessible from other computers in my local network

  - by crooveck

  In my LAN network I have a server with Scientific Linux (RedHat or Fedora based distro), I've done yum install nginx but the welcome page is not accessible from other computers in my network. When I do telnet open localhost 80 and then GET / HTTP/1.0 I get some html code from nginx, so it's running for sure. But when I want to connect remotly, doing telnet open 192.168.3.130 80 I get: Trying 192.168.3.130... telnet: Unable to connect to remote host: No route to host So I assume that there is something wrong with my network settings, maybe iptables or something else? Next step, I turned off iptables: service iptables stop and it helped, now I can connect remotely using telnet. So I think, I need to fix my iptables rules. I did some googling and found this rule -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT but it still didn't allow me to connect remotely when iptables is up. Can someone please help me setting a proper iptables configuration?

  Read the article

• How do I display the Java console?

  - by Brian Knoblauch

  I'm aware of the fact that you can set it to "show" in the Java control panel, but that's not what I'm asking about. I'm curious about the other options... "Do not start" is pretty straightforward, but what about "Hide"? That would seem to imply that it is indeed running. If so, how can I make it show on demand from the hidden state? Reason: It's annoying to have it open ALL the time, hoping there's a way to (preferably via keystroke) bring it from "hidden" to "shown" state for occasional debugging.

  Read the article

• TrueCrypt Corrupted Files

  - by B. Knight

  Several months ago, I needed to reorganize my data across multiple external hard drives with my laptops primary hard drive as the go-between. My external hard drives are all encrypted with TrueCrypt. It appears to me that somehow during the transfer of my files between the encrypted external drive an the unencrypted internal drive, the files were transferred "as-is" (in their encrypted state). The files range from very small to very large. It appears that this may have happened during one consecutive transfer session. Has anyone ever experienced this problem, and if so were you able to fix it? Is there a way to recreate the encrypted partition, transfer the files, and then decrypt them to their usable state? Or can the files somehow be decrypted through other means? UPDATE: I am running Windows 7 (x64) HP now, but may have been runninG ENT. then. Toshiba Laptop 650GB HDD / 4GB Mem. Latest version of TC

  Read the article

• We have a Solaris 9 server running Oracle 10G and have been getting memory consumption errors for a few weeks now

  - by another_netadmin

  We recently upgraded our Enterprise application and everything worked ok until one weekend when we did a server reboot, ever since then we have run into memory errors. The server has 4GB of physical memory installed and the kernel parameters are set to the following (/etc/system). I'm not an Oracle guy so I'm not sure where to start looking but any informaiton is greatly appreciated. Thanks in advance. There are two databases running on this server, one is a production database and the other is a pre-production database. [root@bandb /]# cat /etc/system | grep seminfo set semsys:seminfo_semmni=100 set semsys:seminfo_semmns=2048 set semsys:seminfo_semmsl=400 set semsys:seminfo_semopm=100 set semsys:seminfo_semvmx=32767 [root@bandb /]# cat /etc/system | grep shminfo set shmsys:shminfo_shmmax=4294967295 set shmsys:shminfo_shmmin=1 set shmsys:shminfo_shmmni=100 set shmsys:shminfo_shmseg=10 [root@bandb /]#

  Read the article

• I want to replace 120GB SSD with 240GB SSD. Will I need to reinstall Windows?

  - by Borek

  Some SSD vendors offer "upgrade kits" that are supposed to move the operating system from the old disk to the new one without the need to reinstall it, however, it didn't really quite work for me in the past and I always ended up installing the system from scratch. I'd really like to avoid it now so I'd like to ask: Generally speaking, when upgrading from a smaller to a larger SSD, will something like Windows Complete PC Backup and Restore work? Has someone experienced a seamless upgrade? Is there a proven tool to do that? (That worked for you, not that should work theoretically.) My problem usually is that the restored system sees a different disk, thinks it is a different hardware and doesn't want to restore.

  Read the article

• All Webcams (integrated or otherwise) have stopped working

  - by cgoddard

  Recently, like in the last few months (incidentally, I didn't notice it at first, but I think it might have coincided with the installation of libusb) all webcams have stopped working on my laptop. But, its not a driver error or anything like that, the webcam claims it is working, but when I try to use it in skype, it tells me that it thinks another program is using my webcam. However, I have tried going through every program and closing it until system crash, but it never becomes available. But the light on the side of the inbuilt webcam doesn't come on. And when I added a second webcam, it became available to the system, installed fine, return error 0 on the devices manager, and when I tried to use it, claimed it was in use. How can I find out what might have gone wrong to be causing the system to think that the webcams are constantly in use?

  Read the article

• What are the minimal iptables rules to surf the internet?

  - by alexx0186

  I am trying to set minimal rules to my Linux iptables rules file to just be able to surf the internet. Here what I did: * filter -A OUTPUT -p tcp --dport 80 -j ACCEPT -A OUTPUT -p tcp --dport 443 -j ACCEPT -A OUTPUT -p udp --dport 53 -j ACCEPT COMMIT With just those rules, I can't surf the web. I noticed that when I put -A INPUT -j ACCEPT, it works but I don't understand why. So what Input/output port do I need to surf the internet? Thanks a lot. Regards EDIT: It still doesn't work and my rules as as follows: # generated by iptables-save filter :INPUT DROP [10:648] :FORWARD DROP [0:0] :OUTPUT ACCEPT [10:648] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPTED COMMIT

  Read the article

• Fastest Memory (within reason) for a MotherBoard [on hold]

  - by sampson

  I was wondering if it would be OK to use DDR3 3000 memory with Asus Maximus VI Impact MotherBoard, Intel® Core™ i3-4130T Processor and Steamcom's FC8 case The purpose of this machine is for a HTPC (Home Theater Personal Computer) system, only, no gaming. The case is fan less as is the CPU cooling system. Also, would it be worth it, heat wise, to go past the 1600 memory type? I mean, would DDR 3000 make the box that much faster to make it worthwhile? The Processor has a TDP rating of 35 W. The memory specifications for the processor are: Memory Specifications Max Memory Size (dependent on memory type) 32 GB Memory Types DDR3-1333/1600 # of Memory Channels 2 Max Memory Bandwidth 25.6 GB/s ECC Memory Supported ‡ Yes The FC8 case's heat displacement system is rated at 95 W TDP

  Read the article

• starting command automaticaly [closed]

  - by aaa

  playing with Debian on raspberry pi. I have a 3g dongle modem on the system and there is a software called sakis3g to connect to internet. I want system to connect to internet automatically every time it starts. It takes about 30-40 seconds to get connected. copied sakis3g to /sbin folder. This command has to be run as root: sakis3g connect parameters blah blah blah I tried to put it in the /etc/rc.local and rebooted system, but no luck. I tried to put it in the crontab as: @reboot sakis3g connect parameters blah blah blah What am I missing here?

  Read the article

• How do I mount a "DiskSecure Multiboot" partition?

  - by ????

  For a hard drive that has 4 or 5 partitions, I was able to mount one of them using Ubuntu LiveCD: sudo mount /dev/sda1 /mnt but is there a way to mount to the other partitions? (if using sudo fdisk -l, it only shows /dev/sda) GParted's snapshot is: Right now, the fdisk info is as follows: ubuntu@ubuntu:~$ sudo fdisk -l /dev/sda Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1aca8ea5 Device Boot Start End Blocks Id System /dev/sda1 284993226 350602558 32804666+ 7 HPFS/NTFS/exFAT and then ubuntu@ubuntu:/mnt$ sudo fdisk -l /dev/sda1 Disk /dev/sda1: 33.6 GB, 33591978496 bytes 255 heads, 63 sectors/track, 4083 cylinders, total 65609333 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x2052474d This doesn't look like a partition table Probably you selected the wrong device. Device Boot Start End Blocks Id System /dev/sda1p1 ? 6579571 1924427647 958924038+ 70 DiskSecure Multi-Boot /dev/sda1p2 ? 1953251627 3771827541 909287957+ 43 Unknown /dev/sda1p3 ? 225735265 225735274 5 72 Unknown /dev/sda1p4 2642411520 2642463409 25945 0 Empty Partition table entries are not in disk order Per @lgarzo's request, parted info is: ubuntu@ubuntu:/mnt$ sudo parted /dev/sda print Model: ATA ST3320820AS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 146GB 180GB 33.6GB primary ntfs boot The command sudo mount /dev/sda1p2 /mnt won't work.

  Read the article

• Ubuntu 12.04LTS mountall: Disconnected from Plymouth

  - by user169954

  I have ubuntu 12.04LTS 64bit running on an i5 dual core 8G RAM. On startup I get the message mountall: Disconnected from Plymouth [OK] And the system looks stuck. However, if I go to tty1, then I can login and startx and everything seems to be fine except for being a bit sluggish. I can verify that my nfs mounts are ok, and that my swap is ok. Every time I reboot the system there is a _gdm_gdm_crash file in my /var/crash, which makes me think my problem is rooted in gdm, X configs and/or nvidia drivers. A bit of background in case it's relevant: 3 hours ago my desktop crashed. Following various 'tips' on the web I made a complete mess of my X server and X configuration files, and at one point I even had to recreate my swap partition. Anyway, after much struggle I managed to get to the state I mentioned above: I have a working system provided I always login through tty1. What is this Plymouth anyway? Would it make a difference if I used gnome-wm instead of gdm or lightdm? (I mean to the startup, not to me :-) What bit of config do I change to tell startx to use gnome-wm not gdm or ligthdm? Thank you in advance

  Read the article

• Clear/ Reset Result Table of Search page in OAF

  - by PRajkumar

  Normally problem faced by developers after creating Search Page is how to Clear/ Reset Result Table when developer open search page first time or after search when developer redirecting back to same search page from any other page (say delete page or update page)   Add following Code in your Search page Controller where you have constructed your Query Region   import oracle.apps.fnd.framework.webui.beans.layout.OAQueryBean; ... public void processRequest(OAPageContext pageContext, OAWebBean webBean) {  super.processRequest(pageContext, webBean);  OAQueryBean queryBean = (OAQueryBean)webBean.findChildRecursive("QueryRN");   // Here QueryRN is your Query Region Name as shown in following snap shot  queryBean.clearSearchPersistenceCache(pageContext); }     Note – After add this code, no need to worry about state of Application Module (AM). This code will clean up result table automatically every time when you will open Search page first time and when you are redirecting back to search page. But still as per good coding standard while redirecting back to search page always keep AM state to FALSE

  Read the article

< Previous Page | 469 470 471 472 473 474 475 476 477 478 479 480  | Next Page >