Search Results

Search found 17847 results on 714 pages for 'virtual disk'.

Page 473/714 | < Previous Page | 469 470 471 472 473 474 475 476 477 478 479 480  | Next Page >

• Working bootable CD now suddenly freezes at starting point

  - by xolstice

  I have this strange problem with a bootable CD I created that uses floppy disk 1.44MB emulation. The PC originally worked with it just fine and booted from the CD several times from the prior occasions I used it. Now for some strange reason it decides to freeze at the point where it displays the following text on the screen and does not proceed further: Boot from ATAPI CD-ROM 1. FD 1.44MB System Type-(00) The other strange thing is that if I put in a Linux bootable installation CD, it boots that without any issues. Everytime I stick this custom made bootable CD in it pulls this freezing act. Has anyone experienced this or know how to correct the problem?

  Read the article

• Dell Inspiron/Windows Vista sleep/hibernate issue

  - by sarge

  When I hit the sleep button in Windows the computer looks like it's going into Sleep mode but a few seconds later it's restarted, and stops with this error message: internal hard disk drive not found To resolve this issue, try to reseat the drive. No bootable devices--strike F1 to retry boot, F2 for setup utility Press F5 to run onboard diagnostics. The computer is running Windows Vista (SP2) and I have installed all available Windows Updates and the latest manufacturer drivers. I have already tried to reseated the drive, ran the onboard diagnostics and there were no errors. I have changed the power settings for all devices where it's available so that they are not allowed to wake up the computer. Any ideas?

  Read the article

• Boot time virus scan from USB drive

  - by Tomas Sedovic

  I want to check for viruses on a computer that I suspect may be infected with malware. Its users are running an antivirus, but there's always the risk that something slips past and the way I see it, once the system is infected the antivirus is useless because the malware can hide itself from the AV. I think the best way to go (besides clean reinstall of the OS) would be to have an antivirus running at a boot time from a CD or a USB key. That way, the malware is just lying on the disk and cannot do any of its hide-and-seek stuff (provided the AV comes from an uninfected PC and all that). So, I'm looking for something that: Runs at boot time (off USB key or CD-ROM) Does not touch or require the local OS Discovers malware fairly well (like, Avast, AVG, Norton, whatever -- I think the're all the same anyway) Can handle Windows filesystems (FAT 32, NTFS, WinFS ;-) ) Comes from some sort of trusted source (no Windows Antivirus 2009) I know that this is no silver bullet (nothing is, really*), but I do have a feeling it's more likely to help than doing the scan* within the infected system.

  Read the article

• Why does Windows 7 need hardware virtualization to run XP mode?

  - by Ken Pespisa

  I have a MacBook Pro and I've run VMware Fusion's unity mode and Parallels' cohesion mode along side the Mac OS X, and both work pretty seamlessly. I figured XP Mode in Windows 7 would be something similar, but I then learned my machine requires hardware virtualization support, which it does not have. My machine is an HP dc7800. That's a dual core 2.2GHz machine with 4GBs of RAM. Certainly it has the horsepower to run a virtual environment alongside the primary OS. I'm wondering: 1) Why Microsoft decided to make hardware virtualization a requirement and 2) What am I missing? Is the experience similar to Parallel's cohesion mode / Fusion's unity mode? Thanks!

  Read the article

• Installing Software from a CD onto a Netbook

  - by Jonathan Sampson

  I apologize if this question has come up before - I can't seem to find it. Tonight my wife and I purchased a small samsung netbook and have been enjoying it for a light-weight solution around the house. My wife has a game she loves to play that was installed on her last laptop, but we'd like to put it on the netbook. The problem is, there's no cd-drive on the netbook and the game must be installed from a CD. What other ways can I install software from a CD onto the netbook lacking a local cd-drive on the device itself? I would prefer to not have to create image files, and mount virtual drives, etc.

  Read the article

• Apache Serving 403 Forbidden after OS X Snow Leopard Upgrade to Version 10.6.6

  - by Ian Oxley

  I've just upgraded my MacBook Pro to OS X Snow Leopard version 10.6.6 and now Apache is misbehaving: requests to http://localhost/ generate a 403 Forbidden response -- FIXED requests to any of my virtual hosts seem to generate a 200 Ok response, but contain zero bytes Some further info that might be useful: I'm using the Apache that comes bundled with OS X. I'm using PHP from http://www.entropy.ch/software/macosx/php/ (which is in /usr/local/bin) I've had look at the Apache error log and the only error seems to be the following: [notice] child pid 744 exit signal Segmentation fault (11) I'm completely stumped by this. Any help would be much appreciated. UPDATE Ok, I've managed to resolve the 403 Forbidden error thanks to http://techtrouts.com/mac-os-x-105-web-sharing-forbidden-403-on-httplocalhostusername/ I'm still having the second problem though for any request e.g. this now happens when I request http://localhost

  Read the article

• What is a fairly accepted endpoints to concurrent calls ratio for a PBX?

  - by Logan Bibby

  Hey guys! Not too positive about the relevance of this question to Server Fault, but I'll let you guys poke around at it anyway. :) I'm trying to figure out what an accepted ratio of endpoints to concurrent calls on the "average" office PBX. I'm defining concurrent calls as any call being placed, including internal calls. I'm not going to be considering call centers into this ratio, I'll be looking at those differently, anyway. To give you guys a little history behind the question: I need this ratio to be able to figure out decent specs for a virtual PBX service I'm going to be rolling out within the upcoming months. The ratio will determine the number of trunks needed per PBX system. -- Logan

  Read the article

• Combine drivers from multiple Win7 installs to single image

  - by MikeyB

  I need to prepare a Windows 7 image with drivers for multiple systems (Lenovo laptops). I currently have an image prepared on one laptop type but need to grab the drivers appropriate for the other laptop types as well to ensure that it works on all systems. From what I can tell, the procedure will be: create a boot CD with imageX take a .wim image prepared on the first type of systems take .wim images from the other systems mount the other images in WAIK extract the drivers from the other images inject the drivers into the first .wim boot a system with the boot CD and redeploy the updated .wim image into the Windows partition take an image of the drive with usual imaging tools This all seems a little too convoluted, but I'm willing to do it to get the proper drivers into the image. This is (seemingly) necessarily complicated by having more than one OS on the disk image. Am I on the right track?

  Read the article

• Internet Dropping?!

  - by stead1984

  I have a virtual DC running DNS and Routing and Remote Access, that routes ALL workstations Internet traffic out to the Internet, this works fine but noticed that the Internet drops occasionally. I've checked with our service provider (Managed Communications) and they are adamant that it's not their fault. The Internet drops seem to affect everyone. We also have a server configured to use the same Internet service on a different network over a site-to-site VPN connection which also suffers from packet drops. I've spoken to Cisco and have done many tests with Cisco and they believe the problem is down to the ISP. I'm wondering if it's a DNS issue, as the Internet service uses OpenDNS. Any ideas?

  Read the article

• Windows 7 x64 CD to MP3 ripper

  - by marc_s

  I'm trying to find a good, simple CD-to-MP3 ripper to copy my physical CD's to my computer's hard disk. I'm running Windows 7 Professional x64 - and that appears to be a major problem. All the "usual" free- and shareware tools I've tried (CD-to-MP3, Visual MP3 and quite a few more) seem to have trouble with either 64-bit Windows, or with my HP CD/DVD built into my HP Compaq Elite 8100 machine. Does anyone have any good recommendations? I don't want to install a monster like iTunes - something really clean, small, simple would be fine. Free- or Shareware - if it works reliably and with good quality output, I'll be happy to register! Any hints are welcome!

  Read the article

• Which is generally considered faster or best practice: symlinks or Apache aliases?

  - by Christopher W. Allen-Poole

  I'm curious as to what most people's views are on this subject. Personally, I will almost always prefer symlinks unless I have no other option -- I find that it is far more obvious when someone is navigating the file system, but, on the other hand aliasing is more platform independent. Windows XP, for example, doesn't have anything remotely comparable to symlinks (NTFS junctions are not interpreted correctly by at least some environments), which means that anything which relies on symlinks in a *nix based system cannot be transferred. (I know that Windows 64x OS's have symlinks, but I've not seen if they can be read correctly by the environments previously mentioned) In addition to this, I was also wondering which is considered faster. Is this even possible to know? Do you have a conjecture? I would imagine that since symlinks are generally more low-level than Apache it would make sense that they would be referenced faster, but, on the other hand, I would guess that Apache is required to do a lookup in either case so it would be disk read dependent.

  Read the article

• LUNS access issue in ESX4 Cluster server

  - by rmustafa

  HI, I've created volumes in equallogic in PS 6000 XV(having 2 member which is in 1 pool), checked & those volumes can be easily detected my ISCSI software in windows. But the problem with ESX , not able to see the assigned disk on ESX server, I can explain what I've done: 1.Created Cluster with enabled HA & DRS 2.Added 3 ESX4 HOST 3.Added VMkernel & configured in all 3 ESX4, enabled vmotion & FT on the same adapter. 4.went to iSCSI storage adapter properties, enabled iSCSI 5.Trying to discover the available storage with the controller IP on dynamic discovery, but not able to see the assigned storage Note: the same volume is accessed to windows that means there is no issue from storage , am I right ???? Note: I wanted to mount the same volume in all 3 ESX host. Please suggest .... Thanks & Regards, Rashid Mustafa

  Read the article

• Is it a good idea to have the operating system on a solid state drive?

  - by Kenji Kina

  There is something I don't quite understand. I know a SSD helps with OS load times, but I'm not sure if all this boost is only noticeable/interesting when booting, or gives an all around considerably better experience thereafter. I am interested in having a quick and responsive environment after booting, which leads me to think that it'd be better to spend the SSD capacity in my most used apps (and the page file? Another inside question) and not the OS itself. This, of course, means that I don't know just how much the OS reads/writes its files during normal usage. So, how good an idea is it to dump the whole 20GB+ of Windows 7 OS into the SSD (considering the hefty price per GB of SSD capacity) if I can put up with the usual hard disk boot times? Would I be missing on a lot if I didn't?

  Read the article

• Acer Aspire PC locked up and won't re-start

  - by Jim Scott

  Vista Home Premium locked up on 5/12/10 while on a website and could not get to 'control-alt-delete.' Mouse locked, too. On/off switch would not work (stayed lit) so I unplugged the power cord. When I tried to re-start the computer I could hear a fan running but it would not boot up, nothing on the monitor and no lights on the keyboard. O/S was preloaded so I do not have a boot disk.I tried pressing F1, F2 and F11 and also with monitor off but nothing worked. Computer has not been been moved or abused so all internal connections should be fine. Have updated Windows Vista Home Premium regularly and also updated Avira anti virus and anti malware programs regularly. Using Firefox and Vista Home Premium O/S. Computer is 2 years old and was purchased new from Best Buy.

  Read the article

• Zero-channel RAID for High Performance MySQL Server (IBM ServeRAID 8k) : Any Experience/Recommendation?

  - by prs563

  We are getting this IBM rack mount server and it has this IBM ServeRAID8k storage controller with Zero-Channel RAID and 256MB battery backed cache. It can support RAID 10 which we need for our high performance MySQL server which will have 4 x 15000K RPM 300GB SAS HDD. This is mission-critical and we want as much bandwidth and performance. Is this a good card or should we replace with another IBM RAID card? IBM ServeRAID 8k SAS Controller option provides 256 MB of battery backed 533 MHz DDR2 standard power memory in a fixed mounting arrangement. The device attaches directly to IBM planar which can provide full RAID capability. Manufacturer IBM Manufacturer Part # 25R8064 Cost Central Item # 10025907 Product Description IBM ServeRAID 8k SAS - Storage controller (zero-channel RAID) - RAID 0, 1, 5, 6, 10, 1E Device Type Storage controller (zero-channel RAID) - plug-in module Buffer Size 256 MB Supported Devices Disk array (RAID) Max Storage Devices Qty 8 RAID Level RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 1E Manufacturer Warranty 1 year warranty

  Read the article

• suphp how disable ls /

  - by Pol Hallen

  Using suphp, I set a php.ini to every virtual host. In php.ini I also setted: open_basedir = /home/site1 php script runs, but if I ve a script with ls / I can see whole root directory. How can disable this hole security? <VirtualHost *:80> ServerName site1 ServerAlias www.site1.com DirectoryIndex index.html index.htm DocumentRoot /home/site1/ suPHP_Engine on AddHandler x-httpd-php .php .php3 .php4 .php5 suPHP_AddHandler x-httpd-php # THIS READ php.ini suPHP_ConfigPath /home/site1/ <Directory /home/site1/> Options -Includes -Indexes -FollowSymLinks -ExecCGI -MultiViews AllowOverride none Order allow,deny Allow from all </Directory> </VirtualHost>

  Read the article

• Remotely connecting to a Hyper-V hosted VM's console.

  - by billpg

  Hi everyone. I've just managed to successfully move an aging beige box into a Hyper-V virtual machine. We used to use the beige box by walking over and sitting at the computer itself, but we can't do that so easily when its inside the Hyper-V system. Is there a way please to access the VM's console from a workstation running XP Pro? Please note that its an obscure OS running inside the VM, so installing a VNC or similar service inside the VM is not an option. Many thanks.

  Read the article

• Redirecting to a folder

  - by RN

  Apache2 Plesk 9.x I have a website www.example.com and my blog is on www.example.com/blog I have no content on www.example.com as of now So I want all requests for example.com to be redirected to www.example.com/blog How should I do that ? Is this something I can do in Apache? I am using the GoDaddy DNS server. Not sure if it matters- but I have multiple domains hosted n the same server. And I am using Plesk to manage my virtual hosts.

  Read the article

• HP ProLiant DL320e G8 v2 - USB2.0 during POST

  - by user3513346

  Initially my USB2.0 ports were working during POST (and boot). However, now they appear not to be. I first noticed this when I could not access the RBSU by pressing F9 during POST. Then found that I couldn't boot from USB either (I was able to do both of these initially). When performing the boot via iLo remote console I can access all of the setups (i.e., all of the F(X)'s) and can boot virtual media from a 'removable drive'. Keyboard works fine once the OS is booted. Not really sure what to try here. Any advice would be greatly appreciated. Thanks. Nick.

  Read the article

• Removing RAID on a DELL power-edge server

  - by Simon Callan

  We have a Dell Power-edge T110 server, with either a PERC S100 or S300 raid controller (I suspect S100), and 2 x 500GB SATA hard discs. These discs are running in RAID-1 configuration, (either 1 or 2 virtual discs), and on top of this, we have the C and D drives. As we are running low on disc space, we are looking at dropping the RAID to get some disc space back. Is it possible to split the discs back into 2 seperate hards discs that the OS can see, without losing all the data on the drives? Even better, would it be possible to split the D: drive, leaving the OS C: drive in RAID1 configuration?

  Read the article

• Recovering text files in terminal using grep on Mac OS X Snow Leopard

  - by littlejim84

  I foolishly removed some source code from my Mac OS X Snow Leopard machine with rm -rf when doing something with buildout. I want to try and recover these files again. I haven't touched the system since to try and seek an answer. I found this article and it seems like the grep method is the way to go, but when running it on my machine I'm getting 'Resource busy' when trying to run it on the disk. I'm using this command: sudo grep -a -B1000 -A1000 'video_output' /dev/disk0s2 > file.txt Where 'dev/disk0s2' is what came up when I ran df. I get this when running: grep: /dev/disk0s2: Resource busy I'm not an expert with this stuff, I'm trying my best. Please can anyone help me further? I'm on the verge of losing two days of source code work! Thank you

  Read the article

• Free Google Docs alternative compatible with Opera

  - by f4k3

  Well gDocs isn't working ok, too many bugs and it's pretty slow (especially when saving documents). I have tried several alternatives: - Zoho - they say it's not compatible with Opera and it;s true - you even can't CTRL+V text - Buzzword - it's really slow, and some functions don't work properly (on all browsers) for example "increase indent" increases a random text indent - Etherpad - was taken over by google and is shut down - Peepel - it's a cool thing, almost a free virtual desktop in a browser but it's buggy - a saved a document, tried to open it end an error occured. the document was lost - OpenGoo - went commercial At the moment I'm testing ThinkFree Online - it'a a bit slow (Java :P) and some minor things don't work (like drag a toolbar) but it has cool functionalities (almost like OpenOffice! which I use at home), it actually works with opera (create, save, edit document). Maybe I'll try Scribd but is it a office/share platform? any other worth trying??

  Read the article

• smtp sasl authentication failure

  - by cromestant

  hello, I have configured and fixed almost all the problems with my postfix +courier + mysql setup for virtual mailboxes. I can now receive mail and send it from webmail (squirrel). BUT, what I can't do is authenticate from outside client. Since my isp blocks port 25 I setup postfix to work on 1025 for smtp and setup verbose loging. Here is the verbose log of a failed authentication process LOG Authentication for imap and pop3 seem to be working but this one is not. Here is the postconf -n output. Also through mysql I can verify that it is trying to validate through the system, running a query that returns the encrypted password stored in the database. I can't seem to find the error for this. thank you in advance

  Read the article

• Hyperic HQ says the server is down, but it is not!

  - by Diego Jancic

  Hi, I've been using HQ for a couple months now, and everything worked fine. But since yesterday all resources go down for a couple hours, and then everything restores to normal, and then go down again without doing anything. The server of course is working, the HQ server and agent are both working, and the IPs were not modified. I've tried to re-run the setup in the HQ agent, and it did not change anything. Agent is in Windows 2008, and Server is in Windows 2003. I'm using HQ Version 4.1.2 (build #1053 - May 06, 2009 - Release Build) Any hint? Thanks! Update: I guess (although I'm not sure) it stopped working when the disk on the server went full, with 0 bytes of free space. Of course I've freed more than 15gbs and restarted the HQ server/database.

  Read the article

• Boot camp with Vista crashes on startup

  - by Mark Pim

  I have a 2006 vintage MacBook Pro (Intel Core 2 Duo) and have been using Boot Camp since it was in beta. I had been running XP SP2 on it with Tiger quite happily. I've recently wiped and reinstalled everything to upgrade to Leopard. After installing Leopard, I fired up the Boot camp assistant and used it to install the Windows 7 RC. That worked really nicely, but my HFS+ driver didn't work under Windows 7 yet so I decided to install Vista instead. I didn't repartition the drive, just launched the Vista installation disk from BIOS and told it to overwrite the existing Windows 7 install. It installed fine and I installed the Boot Camp drivers, still all fine. Now, however, every time I boot into Windows and login it hard reboots itself as the desktop is appearing. After this it works fine again. Until the next power off. Has anyone had any similar problems? Or can offer suggestions on how to solve this?

  Read the article

< Previous Page | 469 470 471 472 473 474 475 476 477 478 479 480  | Next Page >