Search Results

Search found 34308 results on 1373 pages for 'identity and access governance'.

Page 474/1373 | < Previous Page | 470 471 472 473 474 475 476 477 478 479 480 481  | Next Page >

  • Password protect an alias virtual directory

    - by Jason
    I have a main domain being hosted through CPanel. I also have a sub-domain that I would like to appear as a path under the main domain instead of as a sub-domain. So I have: http://example.com/ pointing to the main hosted file. http://example.com/mydir pointing to the subdomain files. This is achieved by a httpd.conf include from the main domain section to set an alias: alias /mydir /path/to/subdomain/files/ Now, that works fine so far. The problem is that if a .htaccess file under /path/to/the/subdomain/files/ contains an error, the alias is completely skipped, and /mydir goes instead to the main host files. That is kind of surprising to me - I would expect an error to return an error instead. Now the killer: if I try to password protect /path/to/subdomain/files/, then trying to access http://example.com/mydir will again attempt to deliver from under the main hosted files and not from /path/to/subdomain/files/ I am not seeing any errors reported on the .htaccess file in the apache error log, so I am assuming the .htaccess is valid: AuthUserFile /path/to/valid/readable/.htpasswd AuthName "Secure Access" AuthType Basic Require valid-user This kind of behaviour does not seem right to me. Is there something obvious that could be causing it? Or is this just the way it works? Perhaps using an alias is the wrong way to go?

    Read the article

  • Why does 12.04 try but fail to hibernate, even after I enabled hibernation?

    - by Roger Davis
    Regarding the below (-----) info from another post, my system will try (as is said below) to hibernate, but it won't get all the way there. Hard drive activity stops, but it does not shut down. If I turn the power off, then back on, it will start, but I have to "restore previous session" in the browser and other open apps don't restart, with the accompanying hassle. So because it tries, will the suggested fix then cause it to work correctly, or is the literal "try" not really what he means?!? PLEASE NOTE - this is a desktop system, not a laptop. Before enabling hibernation, please try to test whether it works correctly by running pm-hibernate in a terminal. The system will try to hibernate. If you are able to start the system again then you are more or less safe to add an override. To do so, start editing sudo nano /etc/polkit-1/localauthority/50-local.d/com.ubuntu.enable-hibernate.pkla Fill it with this [Re-enable hibernate by default] Identity=unix-user:* Action=org.freedesktop.upower.hibernate ResultActive=yes Save by pressing Ctrl-O and exit nano by pressing Ctrl-X Restart and hibernation is back!

    Read the article

  • Existing laravel 4 project gives 404 in browser

    - by Richard A
    I'm trying to set up a development environment on a virtual machine running Ubuntu 14.04 LTS using Nginx and HHVM. To do this, I followed the tutorial here. This goes well with a new installation of Laravel. But when I import an existing Laravel 4 project and try to open that on my actual machine (which will serve as the client running Windows 7), I'm getting a 404 File Not Found error on the screen while connecting to http://sav.savrichard.dev. I did add this to the hosts file with the correct IP Address. The virtual machine is receiving the request and responds with a 404 error. How do I solve this error? I'm pretty new to Ubuntu so I'm not exactly sure what's wrong. The project is located at /var/www/sav.savrichard.net The server configuration is as follow: server { listen 80 default_server; root /var/www/sav.savrichard.net/public; index index.html index.htm index.php; server_name sav.savrichard.dev; access_log /var/log/nginx/localhost.sav.savrichard.dev-access.log; error_log /var/log/nginx/localhost.sav.savrichard.dev-error.log error; charset utf-8; location / { try_files \$uri \$uri/ /index.php?\$query_string; } location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { log_not_found off; access_log off; } error_page 404 /index.php; include hhvm.conf; # Deny .htaccess file access location ~ /\.ht { deny all; } } And the hhvm.conf file is: location ~ \.(hh|php)$ { fastcgi_keep_conn on; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; }

    Read the article

  • Accessing second hard drive

    - by Jonathan
    So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris @djeykib So very close to fixing it.. unfortunately on the last command you gave it says this: $ sudo apt-get install linux-lts-backport-natty Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-lts-backport-natty Checking on http://www.ubuntuupdates.org/ppas reveals that it is only available for 10.04. Looks like I'll have to unplug and re-plug hardware if I want it working still :(

    Read the article

  • My Obligatory IPad Post

    - by mark.wilcox
    I've had my IPad for about a week now. So I thought I'd write some thoughts down based on my initial experiences. Here are my initial take-aways: 1 - Netflix OnDemand - I'm a movie junkie. I'm now more apt to just start a movie as background sound for my workday (I telecommute - so except for the occasional bark from my dog, it's awfully quiet here if I don't have something going). 2 - The Email Client is really nice and I'm as fast or faster typing when I have the wireless keyboard engaged. Even with onscreen keyboard - I'm already close to 75% of desktop speed 3 - The battery life is incredible - I think this is the first case where a mobile device actually under-promised on battery 4 - It totally has killed the notion of using a normal PC for my wife and mother-in-law - neither of which had wanted an iPhone/iPod Touch or really any Apple device until they got to play with my iPad. The concept of - instant on, easy to hold and touch-based navigation has them hooked. Heck, it has me hooked. My ultimate goal is to be able to have it at least replace the need to take my netbook with me on the road. I haven't had a chance to complete my testing on that front yet - between work, my wife traveling (for a change) and now my wife home sick - I haven't had time to just play with it. But so far my only regret - that I haven't already bought two more for everyone else in my family who wants to use mine. Posted via email from Virtual Identity Dialogue

    Read the article

  • mount issue in ubuntu 12.10

    - by Vipin Ms
    I'm having issue with latest Ubuntu 12.10. Let me make it more clear. I'm having the following partitions in my Laptop. Device Boot Start End Blocks Id System /dev/sda1 2048 39997439 19997696 83 Linux /dev/sda2 * 40001850 81947564 20972857+ 83 Linux /dev/sda3 81947565 123877214 20964825 83 Linux /dev/sda4 123887614 976773119 426442753 5 Extended /dev/sda5 123887616 333602815 104857600 83 Linux /dev/sda6 333604864 543320063 104857600 83 Linux /dev/sda7 543322112 753037311 104857600 83 Linux /dev/sda8 753039360 976773119 111866880 83 Linux I have also two users named "ms" and abc. Here ms is for administrative tasks and abc for my friends. When I mount any drive under "abc" user, I cannot access it under my other user "ms". Same as in the case with "ms" user. I found possible reason behind the issue. When I mount any drive under "abc" user, Ubuntu will try to mount it under "/media/abc/volume_name" instead of "/media/volume_name" . Same as in the case with "ms" user. # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 19G 11G 7.5G 59% / udev 1.5G 4.0K 1.5G 1% /dev tmpfs 599M 896K 598M 1% /run none 5.0M 0 5.0M 0% /run/lock none 1.5G 620K 1.5G 1% /run/shm none 100M 92K 100M 1% /run/user /dev/sda2 20G 172M 19G 1% /media/abc/TEST /dev/sdb1 466G 353G 114G 76% /media/abc/F088F74288F7063E /dev/sdb2 466G 318G 148G 69% /media/abc/New Volume /dev/sda5 99G 94G 323M 100% /media/abc/Songs /dev/sda6 99G 31G 63G 34% /media/ms/Films Here, you can see that "TEST" was mounted under "/media/abc/TEST". When I try to access the already mounted partition named '/media/abc/TEST" in my "ms" session I'm getting the following error. How to fix this error? Is it a bug? Is there any way to fix this without modifying the underlying file-system structure?

    Read the article

  • Is my project a web site or a mobile app?

    - by Evik James
    I am a web developer. I have been developing web sites professionally for 15+ years using ColdFusion, SQL Server, and jQuery. I am doing a project for a client that uses the above technologies. The site has a mobile facet too. For that, I am using jQuery Mobile. The site enables retail store personnel to gather a store customer's preferences using any smart phone or tablet. The store personnel just needs to access a special link via a QR code and a login. Anyone can easily access the site from a PC's browser, too. Some sources suggest that mobile apps must be downloaded and installed using a third party, such as from Google, Amazon, or Apple. Others sources suggest that any information designed for use on mobile device is a mobile app. Regarding the site that is specifically designed for use by mobile devices that extensively uses jQuery Mobile, is this a "web site" or a "mobile app"? What is the "proper" description for this type of site? My customer insists that it is one and not the other. I insist that it is the other and not the one. Can you help me clarify this?

    Read the article

  • Gmail Now Supports Google Drive Integration; Share Files Up to 10GB

    - by Jason Fitzpatrick
    Gmail users can now easily send large files thanks to Google Drive’s increased integration with Gmail–blow through the 25MB in-email attachment limit and share files up to 10GB. From the official Gmail announcement: Have you ever tried to attach a file to an email only to find out it’s too large to send? Now with Drive, you can insert filesup to 10GB – 400 times larger than what you can send as a traditional attachment. Also, because you’re sending a file stored in the cloud, all your recipients will have access to the same, most-up-to-date version.  Like a smart assistant, Gmail will also double-check that your recipients all have access to any files you’re sending. This works like Gmail’s forgotten attachment detector: whenever you send a file from Drive that isn’t shared with everyone, you’ll be prompted with the option to change the file’s sharing settings without leaving your email. It’ll even work with Drive links pasted directly into emails.  The new Gmail/Drive integration is rolling out in waves to users over the next few days and is accessible via the new Gmail compose window. How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

    Read the article

  • Oracle Endeca "Getting Started" Partner Guide

    - by Grant Schofield
    For partners looking for a concise step by step guide to getting started with Oracle Endeca Information Discovery, here it is to help you get started as quickly as possible. Step 1: Join the Knowledge Zone as a company and an individual - this will give you a) the right to resell Oracle Endeca ID, and b) notice of any free / subsidised training events in your region Step 2: For a quick general overview & positioning see the following article, in particular the Agile BI Video series which are useful in sharing with prospective clients. Also find a link to the official OEID Data Sheet. Step 3: For a more detailed overview there is a live recorded OEID partner webcast with downloadable slides. In conjunction with this, your sales / presales team have free access to the official OEID Partner Playbook as well as the full Oracle price book. Step 4: Download the OEID software and install. Please be aware you will need a 64-bit machine & a 64-bit Operating System. A useful solution for partners that have a 32-bit Operating System is to use Oracle's free VirtualBox software to quickly and easily create a Linux image and install on that. Step 5: Attend a free / subsidised training event in your region. Please join the Knowledge Zone as an Individual (opt in) to be informed of these. We will also publish these via the blog Things are moving fast, so please be aware that the team are working hard to produce more and more material such as downloadable data sets (structured / unstructured), a downloadable image, access to demos, and over the next few weeks we will update this article as soon as new material becomes available!

    Read the article

  • 4 Key Ingredients for the Cloud

    - by Kellsey Ruppel
    It's a short week here with the US Thanksgiving Holiday. So, before we put on our stretch pants and get ready to belly up to the dinner table for turkey, stuffing and mashed potatoes, let's spend a little time this week talking about the Cloud (kind of like the feathery whipped goodness that tops the infamous Thanksgiving pumpkin pie!) But before we dive into the Cloud, let's do a side by side comparison of the key ingredients for each. Cloud Whipped Cream  Application Integration  1 cup heavy cream  Security  1/4 cup sugar  Virtual I/O  1 teaspoon vanilla  Storage  Chilled Bowl It’s no secret that millions of people are connected to the Internet. And it also probably doesn’t come as a surprise that a lot of those people are connected on social networking sites.  Social networks have become an excellent platform for sharing and communication that reflects real world relationships and they play a major part in the everyday lives of many people. Facebook, Twitter, Pinterest, LinkedIn, Google+ and hundreds of others have transformed the way we interact and communicate with one another.Social networks are becoming more than just an online gathering of friends. They are becoming a destination for ideation, e-commerce, and marketing. But it doesn’t just stop there. Some organizations are utilizing social networks internally, integrated with their business applications and processes and the possibility of social media and cloud integration is compelling. Forrester alone estimates enterprise cloud computing to grow to over $240 billion by 2020. It’s hard to find any current IT project today that is NOT considering cloud-based deployments. Security and quality of service concerns are no longer at the forefront; rather, it’s about focusing on the right mix of capabilities for the business. Cloud vs. On-Premise? Policies & governance models? Social in the cloud? Cloud’s increasing sophistication, security in applications, mobility, transaction processing and social capabilities make it an attractive way to manage information. And Oracle offers all of this through the Oracle Cloud and Oracle Social Network. Oracle Social Network is a secure private network that provides a broad range of social tools designed to capture and preserve information flowing between people, enterprise applications, and business processes. By connecting you with your most critical applications, Oracle Social Network provides contextual, real-time communication within and across enterprises. With Oracle Social Network, you and your teams have the tools you need to collaborate quickly and efficiently, while leveraging the organization’s collective expertise to make informed decisions and drive business forward. Oracle Social Network is available as part of a portfolio of application and platform services within the Oracle Cloud. Oracle Cloud offers self-service business applications delivered on an integrated development and deployment platform with tools to rapidly extend and create new services. Oracle Social Network is pre-integrated with the Fusion CRM Cloud Service and the Fusion HCM Cloud Service within the Oracle Cloud. If you are looking for something to watch as you veg on the couch in a post-turkey dinner hangover, you might consider watching these how-to videos! And yes, it is perfectly ok to have that 2nd piece of pie

    Read the article

  • Running a Screen instance of a program as non-root

    - by user288467
    I've got a dedicated server (Ubuntu 12.04, no GUI) set up to launch an instance of McMyAdmin and attach it to a screen instance every time I reboot the hardware. I have the command saved to root's crontab as: @reboot cd /var/MC_SVR && screen -dmS McMyAdmin ./MCMA2_Linux_x86_64 Problem being, though, I have a user set up specifically for FTP access to the server files so I don't always have to SSH into the machine. Since the server is being started as a root process, all the files it makes are, obviously, set with root as the owner. So I chown'd all the files and set them to ftpuser. Now I'm stuck with trying to get the process to start as ftpuser. I've tried doing the following but to no avail: cd /var/MC_SVR && su ftpuser - -c 'screen -dmS McMyAdmin ./MCMA2_Linux_x86_64' I try this in terminal and I get no errors or anything (in fact I never get anything unless it's a syntax error from su), but there's no screen instance to access and so I can assume the server never starts. So, what am I doing wrong? Or am I just not accessing the screen instance correctly since it's (supposed) to be launched by another user?

    Read the article

  • Adding files and folders to a Root Folder (inode/directory)

    - by xBaldwin
    Ok so I'm fairly new to Ubuntu and wasn't even the one who put it one this computer(my friend did while I was storing it at his house because I was in the middle of transitioning between houses), but It's on here so I need to learn what I can so I can use it more effectively. My question at the moment is "Would it be safe to add files/folders to a folder (inode/directory) that requires Root access?" I continue to be informed by the system that the directory I am using is running low on space which I found odd seeing how I should have a lot more room on this computer. That's when I started looking at the directories and found that there are two with a bunch of un-used space on them. One says it has 46.9 GB of free space and the other has 24.9 GB of free space. Seems like a complete waste to not use that space and yet they both say they require Root access to add to them. I know that Root folders and files are normally all system folders and files. I also know that changing or deleting them can mess up the computer which right now I cant afford to do. I just don't know if it would mess anything up to add something to those folders. Thank you in advance to anyone who takes the time to reply and try to teach me about how all that works. I really do appreciate it and will do the same if by some crazy (completely unlikely) reason I have an answer to your question. :-)`

    Read the article

  • Can't write to disk

    - by nofacts
    I have seen questions similar to this, but the answers are either beyond me or the situation doesn't quite match mine. Would appreciate some direction. I recently installed Ubuntu 12.04 LTS. The OS is on a disk formatted as ext4. I added another disk to the system and formatted it as W95 FAT 32 (LBA) (0x0c). I did this because I am moving from Windows to Linux, will be needing to go back and forth with data for a while, and might need to move the disk to a Windows machine. There may have been a better format to use, but if so I didn't know any better. I was able to transfer data from an external drive to this FAT32 drive with no problem. Now, though, when I try to create a new folder or write a file to the disk I get a message that the disk is read-only. If I go to the properties, permissions for the disk, for Folder Access it says 'create and delete files'. If I try to change File Access underneath to 'read and write', either nothing happens or I get a message it can't be done. Thank you for any help.

    Read the article

  • USB flash module giving errors

    - by vshenoy
    Hi, I have a SATA USB flash module which was earlier running a 2.4 linux kernel (2.4.36.6) and on which now I am trying to install ubuntu server 10.04.1 LTS. I have two such USB flash modules and on one of them the installation process itself giving these errors: sd 4:0:0:0 [sda] Device not ready sd 4:0:0:0 [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 4:0:0:0 [sda] Sense Key : Not Ready [current] sd 4:0:0:0 [sda] Add. Sense: Medium not present sd 4:0:0:0 [sda] CDB: Write(10): 2a 00 00 05 48 02 00 00 04 00 end_request: I/O error, dev sda, sector 46114 usb 1-1: reset high speed USB device using ehci_hcd and address 2 Buffer I/O error on device sda1, logical block 172033 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 172034 lost page write due to I/O error on sda1 on the other the installation is successful, but after a day or two of running the machine hangs because of kernel spewing these messages: Remounting filesystem read-only EXT2-fs error (device sda1): read_block_bitmap: Cannot read block [bitmap - block_group = 105, block_bitmap = 860161] EXT2-fs error (device sda1): ext2_get_inode: unable to read inode block - inode=13083, block=24683 ext2_free_inode: bit already cleared for inode 83966 and the machine needs to be hard rebooted. On both the systems SCSI emulation with usb_storage driver is being used to detect the module. Here is the output of /proc/scsi/scsi on 2.4: # cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 02 and on 2.6: # cat /proc/scsi/scsi Attached devices: Host: scsi6 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 00 i.e. only 'ANSI SCSI revision:' is shown as different, although I am not sure if this can cause any problem. Really appreciate if someone can point as to how to debug this issue or any mailing list where I can further ask questions about this.

    Read the article

  • JavaOne Technology Conference Is Coming to Russia

    - by Tori Wieldt
    JavaOne Russia 17-18 AprilRussian Academy of Sciences, MoscowRegister Now JavaOne and Oracle Develop 2012 Russia offers a wide variety of sessions, hands-on labs, keynotes, demos, and the opportunity to network with developer peers. If you’re looking for in-depth sessions on Java technologies and tools, this is the conference for you. Your registration also gets you into Oracle Develop sessions as well, so you can learn about application servers, cloud development and, of course, database development. The JavaOne Russia tracks are:Client-Side Technologies and Rich User ExperiencesLearn about developments in Java for the desktop and practices for building rich, immersive, and powerful user experiences across multiple hardware platforms and form factors. Core Java PlatformDiscover the latest innovations in Java virtual machines. Get deep technical explanations in security and networking and enhancements that allow dynamic programming languages to drive Java platform adoption. Java EE Web Profile, Platform Technologies, Web Services, and the Cloud Update your knowledge on topics such as Web application development, persistence, security, and transactions. This track will also address modularity, enterprise caching, Web sockets, and internet identity. Mobile, Java Card, Embedded, and DevicesThis track is devoted to Java technology as the ultimate platform for mobile computing. It also covers embedded and device usages of Java technologies, including Java SE, Java ME, Java Card, and JavaFX. Share this event: #oracleRU

    Read the article

  • StarterSTS 1.1 CTP &ndash; ActAs Support

    - by Your DisplayName here!
    Due to popular demand, I added identity delegation (aka ActAs) support to StarterSTS. To give this feature a try, first download the new bits and add a enableActAs = true to startersts.config. You then have to configure which user account is allowed to delegate, as well as the target realm to delegate to. This is done in usermappings.config, e.g.: <userMappings xmlns="http://www.thinktecture.com/configuration/usermappings">     <user name="middletier">       <mappings>         <mapping type="ActAs"                  value="https://server/service.svc" />       </mappings>     </user>   </users> </userMappings> Please use the forum for any feedback. thanks!

    Read the article

  • Coordinate spaces and transformation matrices

    - by Belgin
    I'm trying to get an object from object space, into projected space using these intermediate matrices: The first matrix (I) is the one that transforms from object space into inertial space, but since my object is not rotated or translated in any way inside the object space, this matrix is the 4x4 identity matrix. The second matrix (W) is the one that transforms from inertial space into world space, which is just a scale transform matrix of factor a = 14.1 on all coordinates, since the inertial space origin coincides with the world space origin. /a 0 0 0\ W = |0 a 0 0| |0 0 a 0| \0 0 0 1/ The third matrix (C) is the one that transforms from world space, into camera space. This matrix is a translation matrix with a translation of (0, 0, 10), because I want the camera to be located behind the object, so the object must be positioned 10 units into the z axis. /1 0 0 0\ C = |0 1 0 0| |0 0 1 10| \0 0 0 1/ And finally, the fourth matrix is the projection matrix (P). Bearing in mind that the eye is at the origin of the world space and the projection plane is defined by z = 1, the projection matrix is: /1 0 0 0\ P = |0 1 0 0| |0 0 1 0| \0 0 1/d 0/ where d is the distance from the eye to the projection plane, so d = 1. I'm multiplying them like this: (((P x C) x W) x I) x V, where V is the vertex' coordinates in column vector form: /x\ V = |y| |z| \1/ After I get the result, I divide x and y coordinates by w to get the actual screen coordinates. Apparenly, I'm doing something wrong or missing something completely here, because it's not rendering properly. Here's a picture of what is supposed to be the bottom side of the Stanford Dragon: Also, I should add that this is a software renderer so no DirectX or OpenGL stuff here.

    Read the article

  • Anemic Domain Model, Business Logic and DataMapper (PHP)

    - by sunwukung
    I've implemented a rudimentary ORM layer based on DataMapper (I don't want to use a full blown ORM like Propel/Doctrine - for anything beyond simple fetch/save ops I prefer to access the data directly layer using a SQL abstraction layer). Following the DataMapper pattern, I've endeavoured to keep all persistence operations in the Mapper - including the location of related entities. My Entities have access to their Mapper, although I try not to call Mapper logic from the Entity interface (although this would be simple enough). The result is: // get a mapper and produce an entity $ProductMapper = $di->get('product_mapper'); $Product = $ProductMapper->find('[email protected]','email'); //.. mutaute some values.. save $ProductMapper->save($Product) // uses __get to trigger relation acquisition $Manufacturer = $Product->manufacturer; I've read some articles regarding the concept of an Anemic Domain model, i.e. a Model that does not contain any "business logic". When demonstrating the sort of business logic ideally suited to a Domain Model, however, acquiring related data items is a common example. Therefore I wanted to ask this question: Is persistence logic appropriate in Domain Model objects?

    Read the article

  • How-To: Run CMSDK against a RAC cluster

    - by frank.closheim
    Using CMSDK in a production environment often requires a robust, reliable and failover enabled repository. When using Oracle Real Application Cluster (RAC) with your CMSDK repository you need to have a specific configuration in place to support such a setup. This post will explain the configuration steps required when running CMSDK 9.0.4.6 with Oracle WebLogic Server (WLS).In the previous CMSDK 9.0.4.2 version a RAC enabled connect string looked like this: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = rac1)(PORT = 1521))(ADDRESS = (PROTOCOL = TCP)(HOST = rac2)(PORT = 1521))(LOAD_BALANCE = NO)(FAILOVER = ON)(CONNECT_DATA =(SERVICE_NAME = rac)(failover_mode = (type=select)(method=basic)))CMSDK 9.0.4.6 makes use of data sources to connect to the underlying database. These data sources are configured inside your Application Server, such as Oracle WebLogic Server.In Oracle WebLogic Server 10.3.4, a single data source implementation has been introduced to support an RAC cluster. It responds to Fast Application Notification (FAN) events to provide Fast Connection Failover (FCF), Runtime Connection Load-Balancing (RCLB), and RAC instance graceful shutdown. XA affinity is supported at the global transaction Id level. The new feature is called WebLogic Active GridLink for RAC; which is implemented as the GridLink data source within WebLogic Server.This GridLink data source also works with Oracle Single Client Access Name (SCAN). SCAN is a feature used in RAC environments that provides a single name for clients to access any Oracle Database running in a cluster. You can think of SCAN as a cluster alias for databases in the cluster. The benefit is that the client’s connect information does not need to change if you add or remove nodes or databases in the cluster.The CMSDK 9.0.4.6 documentation describes how to create a regular JDBC data source named jdbc/OracleDS. Please refer to the following document which describes in detail how to create a GridLink data source in WLS.

    Read the article

  • How to host an AP or a hotspot?

    - by user1048138
    I'm running Ubuntu 12.04 as a virtual machine on my Mac. Since I am unable to get the virtual machine to have full access to my WiFi card, I bought another USB WiFi card to use. This is my WiFi card. If you are unfamiliar with Virtual machine, as far as I know, since the Ubuntu has its own card now, it shouldn't matter. I have followed these guides with no luck: https://help.ubuntu.com/community/WifiDocs/WirelessAccessPoint http://www.danbishop.org/2011/12/11/using-hostapd-to-add-wireless-access-point-capabilities-to-an-ubuntu-server/ The problem is that the WiFi connection appears on all of the machines that I have in my house: 2 iPhones, Dell machine running Ubuntu and two Macbooks. However the connection times out on all of these machines. Questions: Could this be a driver issue if that same WiFi card can connect to other WiFi points and use its internet Could this be DHCP related? I would think not. It should at least get a 169.X.X.X address? No? Any solutions for me?

    Read the article

  • Sweden Windows Azure Group Meeting in November &amp; Fast with Windows Azure Competition

    - by Alan Smith
    SWAG November Meeting There will be a Sweden Windows Azure Group (SWAG) meeting in Stockholm on Monday 19th November. Chris Klug will be presenting a session on Windows Azure Mobile Services, and I will be presenting a session on Web Site Authentication with Social Identity Providers. Active Solution have been kid enough to host the event, and will be providing food and refreshments. The registration link is here: http://swag14.eventbrite.com If you would like to join SWAG the link is here: http://swagmembership.eventbrite.com Fast with Windows Azure Competition I’ve entered a 3 minute video of rendering a 3D animation using 256 Windows Azure worker roles in the “Fast with Windows Azure” competition. It’s the last week of voting this week, it would be great if you can check out the video and vote for it if you like it. I have not driven a car for about 15 years, so if I win you can expect a hilarious summery of the track day in Vegas. My preparation for the day would be to play Project Gotham Racing for a weekend, and watch a lot of Top Gear.   My video is “Rapid Massive On-Demand Scalability Makes Me Fast!”. The link is here: http://www.meetwindowsazure.com/fast/

    Read the article

  • I can't hear any sounds on ubuntu 11.10 on Dell inspiron N5010

    - by Ahmed
    I have a problem that I can't hear any sounds and I don't know where to start. I did the following : lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) Subsystem: Dell Device 0447 Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at fbf00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel -- 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Dell Device 0447 Flags: bus master, fast devsel, latency 0, IRQ 49 Memory at fbe40000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel And It seems that I have 2 soundcards. Is that normal ?? I also did this: aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 Also on the sound setting GUI. I have 2 hardware profiles for sound cards but none of them works when I test the speakers. Where should I start searching ?

    Read the article

  • Pantheon Not Completely Installed?

    - by Simon
    I have just installed the pantheon shell today, and I have not found any help with this yet. I am not just a random noob, i use a bunch of other shells and i also have a few development applications on my copy of ubuntu. But ever since ive opened up pantheon, i cannot find settings or this thing called the launchpad. (if the launchpad is the app drawer up in the upper left corner, or if its the dock. i have it, if thats not what launchpad is, then i cant access it.) I can only change my wallpaper by going back to unity, gnome, or KDE. There is a system settings in the power menu (upper right), but it only has Language Support, Ubuntu One, Additional Drivers, And Printing. I can still access the full ubuntu settings in GNOME of Unity. But thats it. I installed in the terminal, uninstalled, and reinstalled using the software center. Please Help Me If Any Of You Can! Thanks!!!

    Read the article

  • How to write code that communicates with an accelerator in the real address space (real mode)?

    - by ysap
    This is a preliminary question for the issue, where I was asked to program a host-accelerator program on an embedded system we are building. The system is comprised of (among the standard peripherals) an ARM core and an accelerator processor. Both processors access the system bus via their bus interfaces, and share the same 32-bit global physical memory space. Both share access to the system's DRAM through the system bus. (The computer concept is similar to Beagleboard/raspberry Pie, but with a specialized accelerator added) The accelerator has its own internal memory (SRAM) which is exposed to the system and occupies a portion of the global address space (as opposed to how a graphics card would talk to teh CPU via a "small" aperture in the system memory space). On the ARM core (the host) we plan on running Ubuntu 12.04. The mode of operation of communicating between the processors should be that the host issues memory transactions on the system bus that are targeted at the accelerator internal memory. As far as my understanding goes, if I write a program for the host that simply writes to the physical address of the accelerator, most chances are that the program will crash due to a segmentation violation. So, I assume that I need some way of communicating with the device in real mode. What is the easiest way to achieve this mode of operation?

    Read the article

  • Single-developer GIT workflow (moving from straightforward FTP)

    - by melat0nin
    I'm trying to decide whether moving to VCS is sensible for me. I am a single web developer in a small organisation (5 people). I'm thinking of VCS (Git) for these reasons: version control, offsite backup, centralised code repository (can access from home). At the moment I work on a live server generally. I FTP in, make my edits and save them, then reupload and refresh. The edits are usually to theme/plugin files for CMSes (e.g. concrete5 or Wordpress). This works well but provides no backup and no version control. I'm wondering how best to integrate VCS into this procedure. I would envisage setting up a Git server on the company's web server, but I'm not clear how to push changes out to client accounts (usually VPSes on the same server) - at the moment I simply log into SFTP with their details and make the changes directly. I'm also not sure what would sensibly represent a repository - would each client's website get their own one? Any insights or experience would be really helpful. I don't think I need the full power of Git by any means, but basic version control and de facto cloud access would be really useful.

    Read the article

< Previous Page | 470 471 472 473 474 475 476 477 478 479 480 481  | Next Page >