Search Results

Search found 15357 results on 615 pages for 'oracle corporation'.

Page 474/615 | < Previous Page | 470 471 472 473 474 475 476 477 478 479 480 481  | Next Page >

  • I can't enable extra effects in Ubuntu 10.10. Please help?

    - by jasoncruz98
    I installed Ubuntu 10.10 alongside Ubuntu 11.10 to use an older version of Compiz. On Ubuntu 11.10, Compiz was enabled by default and I didn't need to use any graphics driver to enjoy the effects. All I had to do was install CompizConfig Settings Manager and enable those extra effects. That was Compiz 0.9.6. Now, after installing Ubuntu 10.10, when I first logged in, the graphics were slow. When I dragged a window from one end of the screen to the other, the whole screen would blur up and pixelate and it would be very laggy. I tried going to System Preference Appearance and selecting Extra effects on the Visual effects tab, but all I got was "Desktop effects could not be enabled". I don't know whether I should install the Additional drivers (proprietary) because my Internet is slow and it would take a long time. Furthermore, in Ubuntu 11.10, after I installed the proprietary graphics driver, I immediately went into fallback mode and wasn't even offered an option to set my desktop session to Ubuntu 3D. I didn't need the driver to run Compiz in Ubuntu 11.10, it just ran so smoothly. But in Ubuntu 10.10, everything is so laggy. Should I install the ATI/AMD Proprietary FGLRX Graphics Driver for Ubuntu 10.10 to enable extra effects? Or is there something else wrong with my system? Here is the output of lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation Sandy Bridge Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:6760] Here is the output of the same command, but in Ubuntu 11.10 (in this case the one which is correct, because I don't have the Sandy Bridge Integrated graphics controller) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] [1002:6760]

    Read the article

  • How do you run XBMC on nvidia dual screen and stop it from taking over the keyboard and mouse?

    - by Paul Swartout
    I have set up dual screen under Ubuntu 12.04. I have a GeForce 8500 GT and have used the nVidia control panel to set up dual screen in "Separate screen mode". Here's the resulting xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:38:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Maxdata/Belinea B1925S1W" HorizSync 31.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor1" VendorName "Unknown" ModelName "CRT-1" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "CRT-1: 1280x768 +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-1: 1360x768_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection All well and good and I have a nice blank XWindow displayed on my TV (the 2nd monitor). I then fire up XBMC from a terminal on the PC monitor using DISPLAY=:0.1 xbmc XBMC fires up quite nicely on the TV however I can no longer use the main PC monitor / mouse / keyboard as XBMC on the TV screen seems to have focus. I was hoping to have XBMC running on the TV and let the kids use the MCE remote whilst I get on with my work on the PC monitor. Does anyone have any idea how to overcome this? I'm presuming there's some xorg.conf fun and games needed but I've no idea where to start to be honest.

    Read the article

  • Problem with installing Nvidia display drivers on Ubuntu 13.10

    - by Pascal
    Hello everyone and thank you for taking a look at this topic! I'm currently trying out Ubuntu 13.10 but I keep hitting a wall when it comes to installing a driver. I've tried: sudo apt-get install nvidia-current This resulted in a un-bootable system. The screen just stayed black and the cursor displayed as an 'X'. After that I did had to re-install Ubuntu. The computer I'm using is an Acer-Aspire-V3 with a build in Nvidia geforce GT 630M and also with a Intel HD graphics chip-set (not sure if chip-set is the right word here). "lspci | grep VGA" output: pascal@pascal-Aspire-V3-571G:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1) I've searched a bit here and there and found out that it would be wise to mention that this laptop is using (or so I think) Nvidia Optimus, not sure if it will add anything to the subject but at least I'll mention it just to be sure. Now to the questions: Q1 How is this caused and how can I fix it? Q2 What additional information could I provide to help you help me?

    Read the article

  • No sound after upgrading to Ubuntu 11.10 from win7

    - by Tilman
    just as a prefix to my question, i'd like to note that i'm just now entering the world of Linux (unless you count my android, but that's a very different experience...) i have two computers now that run Ubuntu 11.10, the first of which i've had very little problems with, aside from figuring out the basics. the second, from which i'm writing this question, has (up to this point) only had one problem.... no sound. i've read a couple questions similiar and found little help as the component catalog doesn't have my computer listed. (in fact i'm not suprised this is a pos i had my mom grab from her work before they officially closed the doors behind them) had perfect sound before hand, and no sound now. sudo lspci -v brings up 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) Subsystem: Intel Corporation Device d608 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at ff980000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel any help would be greatly appreciated, me and my gf just wanna watch a damn movie lol

    Read the article

  • Can't configure 5.1 audio with 12.04

    - by xster
    I have an Intel ALC892 and a Nvidia GT 520m connected to speakers via HDMI. On lspci, I see 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: ZOTAC International (MCO) Ltd. Device a218 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at db400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel 02:00.1 Audio device: NVIDIA Corporation HDMI Audio stub (rev a1) Subsystem: ZOTAC International (MCO) Ltd. Device 2180 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at db080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel My alsamixer looks like I enabled pulseaudio configuration file to have 6 channels. My sound setting looks like When I use the test dialog, only front left and right have sounds. If I use alsa in XBMC on a 5.1 video, there's no sound. If I use pulseaudio, only front right and left have sound. I can barely hear any speech since I'm guessing it's mapped to front center. Any clues?

    Read the article

  • Intel N10 graphics

    - by Rapsag1980
    Español: Buen día. Instalé en una notebook ubuntu 12.04 pero me da el problema que solamente me da dos resoluciones de pantallas 800x600 y 1024x768... En la primera se ve muy grotesca la pantalla y en la segunda se ve bien, pero falta un pedazo de pantalla arriba y abajo... He tratado de buscar información sobre el tema pero parece uno de esos "bugs" que no han conseguido ser erradicados... Intenté hacer el Xorg.conf y esas cosas y nomas no se puede... Recurro a su sapiencia y experiencia en este tipo de problemas... La mini es una Lanix Neuron lt, procesador intel atom n450 y la tarjeta Intel corporation N10 family integrated graphics controller.... Inglés: Good day. I installed ubuntu 12.04 on a notebook but I get the problem that only gives me two screen resolutions of 800x600 and 1024x768 ... The first screen looks very grotesque and the second looks good, but missing a piece of screen up and down ... I tried to find information on the subject but it seems one of those "bugs" that have failed to be eradicated ... I tried to do the Xorg.conf nomas and stuff and you can not ... I appeal to your wisdom and experience in this kind of problem ... The mini is a Neuron Lanix lt, Intel Atom N450 processor and the Intel integrated graphics family corporation N10 controller ....

    Read the article

  • Can't get wireless working after installing ubuntu 12.10 on acer aspire 5560-7414

    - by markdel
    I have been struggling all day trying different solutions from different posts on how to get my wifi working but none have worked. Any help would be greatly appreciated. Below are some wireless preferences to help find the problem. mark@mark-Aspire-5560:~$ sudo rfkill list all [sudo] password for mark: 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 1: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no *-network description: Ethernet interface product: NetLink BCM57785 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 10 serial: 20:6a:8a:7f:63:82 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=full firmware=sb ip=158.65.194.244 latency=0 link=yes multicast=yes port=twisted pair speed=10Mbit/s resources: irq:16 memory:f0000000-f000ffff memory:f0010000-f001ffff memory:f0050000-f00507ff *-network description: Wireless interface product: BCM43227 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 00 serial: 08:ed:b9:01:e0:8b width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.112 latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:f0100000-f0103fff

    Read the article

  • how to setup duel monitors an xorg.conf

    - by MrMonty
    # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" # Removed Option "Xinerama" "1" # Removed Option "Xinerama" "0" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-1: 1280x1024 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" # Removed Option "TwinView" "1" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0; DFP-1: 1280x1024_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection thats my file!

    Read the article

  • Ubuntu 13.10, kernel 3.11 blank screen issue with hybrid graphics

    - by Lagerbaer
    On my HP Envy, which has both an Intel on-chip graphics card and an Nvidia Geforce: *-display UNCLAIMED description: 3D controller product: GK208M [GeForce GT 740M] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: cap_list configuration: latency=0 resources: memory:d2000000-d2ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:5000(size=128) memory:b2000000-b207ffff *-display description: VGA compatible controller product: 4th Gen Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 06 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:d3000000-d33fffff memory:c0000000-cfffffff ioport:6000(size=64) I have trouble with all newer kernels. I basically had to install 12.04 LTS and use their 3.5 kernel family to get the system to boot. The 3.8 from 12.10 or the newest 3.11 from Ubuntu 13.10 leave me with a black screen upon boot. On one occasion I did hear the "log in" sound, but the screen did not display anything. I have purged all nvidia drivers so I guess it should just use the intel drivers, but apparently this is all messed up with newer kernel versions. This is different from the other "nvidia boots into blank screen" bug in that I don't rely solely on an nvidia card. Surely the intel on-chip card should be supported and leave me with something different from a blank screen? Again, it only works with kernel versions 3.5.0-41-generic, not with the 3.11.0-12 one that ships with Ubuntu 13.10. When I go into the grub menu and change the boot options from 'quiet splash' to 'nomodeset' I am able to boot the system, but then I don't get any graphics and trying 'sudo service lightdm start' doesn't succeed (I get 100% CPU for apport, but this doesn't do anything either, so I kill it). Help, I'm all out of ideas. EDIT: Let me add that I'm using the EFI boot system and have a dual-boot installation with Windows 8.

    Read the article

  • Bluetooth mouse no longer paired after resuming from suspend since upgrading to 13.10

    - by Korakys
    Since upgrading to 13.10 from 13.04 my mouse no longer connects via bluetooth. In settings it states that the mouse is not paired. Restarting bluetooth with sudo /etc/init.d/bluetooth restart does not help. Restarting the computer does fix the problem if bluetooth is restarted also with the previously mentioned command, but this is not ideal. The mouse worked fine prior to updating to 13.10. The computer is a ThinkPad X230 with a Broadcom 'BCM20702A0' bluetooth module (I think). When it is not working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:766129 acl:49888 sco:0 events:2233 errors:0 TX bytes:5953 acl:240 sco:0 commands:274 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'BCM20702A' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) When it is working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:253334 acl:16391 sco:0 events:842 errors:0 TX bytes:2519 acl:65 sco:0 commands:84 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) I am a relative novice with linux so don't ask me compile anything please, but I can use google.

    Read the article

  • Dual monitor display 12.04?

    - by MrMonty
    I have 2 beautiful 27" asus monitors. I started trying out Ubuntu 12.04 and now only one works and thats vga .. Any help here cause I'm stumped. I have a bfg tech nivida Geforce 8800 gt 512mb and I'm trying to fix this. Getting this error Wen i try to configure the xorg file Failed to set MetaMode (1) 'DFP-0: 1280x1024 @1280x1024 +0+0, DFP-1: 1280x1024 @1280x1024 +1280+0' (Mode 2560x1024, id: 50) on X screen 0. ........................................................................................... This is the xorg.conf ....................................................... nvidia-settings: X configuration file generated by nvidia-settings nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Removed Option "Xinerama" "1" Removed Option "Xinerama" "0" Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputClass" Identifier "Mouse Remap" MatchProduct "Saitek Cyborg R.A.T.7 Mouse" MatchDevicePath "/dev/input/event*" Option "ButtonMapping" "1 2 3 4 5 6 7 8 9 0 0 0 0 0 0" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-1: 1280x1024 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Removed Option "TwinView" "0" Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Removed Option "TwinView" "1" Removed Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0" Removed Option "TwinView" "0" Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0; DFP-1: 1280x1024_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection FILE ^^^^

    Read the article

  • aplay -l says no soundcards found; alsaconf says no supported cords; yet /proc/asound contains cards

    - by nimasmi
    I am trying to get HDMI output using a Gainward Nvidia 210 512 MB on Ubuntu 10.04 Lucid Lynx. I have upgraded alsa-driver, alsa-lib and alsa-utils to 1.0.24 by building from source, thanks to this blog post. Some relevant output... user@box:~$ lspci | grep Audio 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 01:09.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 01:09.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) 01:09.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) user@box:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. Compiled on Sep 15 2012 for kernel 2.6.32-42-generic (SMP). user@box:~$ ls /proc/asound` card0 cards hwdep NVidia oss seq version card1 devices modules NVidia_1 pcm timers user@box:~$ aplay -l aplay: device_list:240: no soundcards found... user@box:~$ sudo /sbin/alsa-utils start * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1403: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... amixer: Invalid command! ...done. Any help appreciated. PS my video card is connected only through the PCI-E slot. I assume there is no extra audio connection required.

    Read the article

  • How to disable discrete GPU using NVIDIA drivers?

    - by penzoiders
    I have a DELL studio XPS 13 (aka 1340) as of 12.04 most things run smoothly out of the box, but I have some power draining and warmness issues (if not to be called terrible heat issues) The system came with a NVIDIA GeForce 9500M (which has Hybrid SLI) and it shows up in "lspci" as these 2 cards 02:00.0 VGA compatible controller: NVIDIA Corporation G98 [GeForce 9200M GS] (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation C79 [GeForce 9400M G] (rev b1) I had to install nvidia-current over noveau driver 'cause noveau does freeze the system after suspension. By installing nvidia-current and running nvidia-xconfig the resume process after suspension is fixed. By the way both with nvidia-current and noveau the system drains a lot of battery and heats up a lot. I suppose this is because the discrete GPU is always on. I don't really need 3D graphics on this system, if not the minimal to run unity and compiz for window management. So my question is: How do I disable, using nvidia-current, the discrete GPU 9200M and use only the integrated one 9400M? notes: In BIOS I have no option to disable discrete GPU This I think is not applicable because of the suspension-freeze issue (with noveau): https://help.ubuntu.com/community/HybridGraphics I've found this but I don't know which --sli option I should choose to fit my needs: http://manpages.ubuntu.com/manpages/hardy/man1/nvidia-xconfig.1.html My system has not optimus or cuda, but anyone can tell me if bumblebee can work for me?

    Read the article

  • Can't get Unity 3D to work in 11.10

    - by pmoseph
    I recently upgraded to 11.10 on my Lenovo ThinkPad T520, and I'm not able to load Unity 3D (I'm not selecting 2D at login menu either). me@mycomp:~$ echo $DESKTOP_SESSION ubuntu-2d I ran the unity support test below as well. me@mycomp:~$ /usr/lib/nux/unity_support_test -p Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Error: unable to create the OpenGL context And it looks like I only have one graphics card: me@mycomp:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Also, Ubuntu lists nothing under the "Additional Drivers" window. Any help would be extremely appreciated as I'm somewhat of a noob. Thanks! Edit 1: Here is the output of lshw -C display me@mycomp:~$ sudo lshw -C display *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:f0000000-f03fffff memory:e0000000-efffffff ioport:5000(size=64)

    Read the article

  • Lenovo v570 ubuntu 12.04 wireless hard blocked even when ext. switch is on

    - by user100987
    When I run iwconfig it say's lo and eth0 have no wireless extensions, but wlan0 it says IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS the:off Fragment the:off Power Management:off and I believe that's my problem, I just don't know how to turn it back on Any help? When I ran lspci | grep Network it gave me this 02:00.0 Network controller: Intell Corporation Centrino Wireless -N + WiMAX 6150 (rev 67) How I know that my wireless is hard blocked because when I run sudo rfkill list all I get 0: Ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes when I run lshw -c network I get. *-network DISABLED description: Wireless interface product: Centrino Wireless-N + WiMAX 6150 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: mon1 version: 67 serial: 40:25:c2:d2:96:2c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list logical wireless ethernet physical configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-32-generic-pae firmware=41.28.5.1 build 33926 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:d0500000-d0501fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: f0:de:f1:d7:a0:4d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.0.65 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:2000(size=256) memory:d0404000-d0404fff memory:d0400000-d0403fff

    Read the article

  • How to Install Broadcom Wireless Drivers (BCM43xx)

    - by Fer1805
    I'm having serious problems installing the Broadcom drivers for Ubuntu. It worked perfectly on my previous version, but now, it is impossible. I'm a user with no advance knowledge in Linux, so I would need clear explanations on make, compile, etc. Edit: For the command: "lspci | grep Network", I get the following message: 06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) For the command: iwconfig, i get the following: lo no wireless extensions. eth0 no wireless extensions. When i follow the following steps (from the above link), there are a NO error message at all: open the 'Synaptic Package Manager' and search for bcm uninstall the bcm-kernel-source package make sure that the firmware-b43-installer and the b43-fwcutter packages are installed type into terminal: cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl' (you may want to copy this) and see if the term blacklist bcm43xx is there if it is, type cd /etc/modprobe.d/ and then sudo gedit blacklist.conf put a # in front of the line: blacklist bcm43xx then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly). reboot 'End of procedure' Before (not ubuntu 11.04), if i wanted to connect wireles, i just went to the icon at the upper side of the screen, click, showed ALL the wireless network available, and done. Now, the only options i see are: Wired Network Auto Eth0 Disconnect VPN Enable networking Connection information Edit connection. lspci -vnn | grep Network showed: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] hope above info is enough for your help.

    Read the article

  • Unable to enable wireless in ubuntu 12.04

    - by Joe
    I have a Vostro 2520 and not sure how to enable wireless on my machine. The details are given below, would appreciate any pointers to resolving this issue. lsmod returns Module Size Used by ath9k 132390 0 ath9k_common 14053 1 ath9k ath9k_hw 411151 2 ath9k,ath9k_common ath 24067 3 ath9k,ath9k_common,ath9k_hw b43 365785 0 mac80211 506816 2 ath9k,b43 cfg80211 205544 4 ath9k,ath,b43,mac80211 bcma 26696 1 b43 ssb 52752 1 b43 ndiswrapper 282628 0 ums_realtek 18248 0 usb_storage 49198 1 ums_realtek uas 18180 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_cirrus 24002 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep psmouse 97362 0 dell_wmi 12681 0 sparse_keymap 13890 1 dell_wmi snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq wmi 19256 1 dell_wmi snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device mac_hid 13253 0 i915 473240 3 drm_kms_helper 46978 1 i915 uvcvideo 72627 0 drm 242038 4 i915,drm_kms_helper videodev 98259 1 uvcvideo soundcore 15091 1 snd dell_laptop 18119 0 dcdbas 14490 1 dell_laptop i2c_algo_bit 13423 1 i915 v4l2_compat_ioctl32 17128 1 videodev snd_page_alloc 18529 2 snd_hda_intel,snd_pcm video 19596 1 i915 serio_raw 13211 0 mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 sudo lshw -class network *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7c00000-f7c07fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 07 serial: 78:45:c4:a3:aa:65 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.1.5 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:e000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes

    Read the article

  • What are the memory-management capabilities of MySQL + JDBC (in light of autonomic computing)?

    - by Adel
    I'm interested in implementing some kind of autonomic-computing functionality using MySQL. By autonomic-computing I mean roughly some failsafe abilities, whereby the application appears to be at least slightly "intelligent" For reference, the main parts of autonomic computing we'd like are the "self-configuring" and "self-healing" features (the other two - "self-optimizing" and "self-protecting", are too abstract/futuristic for us, at this time). Sofor example, if we have a sample Java application that utilizes a MySQL database, we might want to automatically restart the MySQL database if we take up too much memory. Or maybe we want to have the ability to dynamiccally adjust the database memory as needed. So for example, when we start the application the database begins with a 56 Megabyte buffer; but then as we insert so many rows we want to have it automatically jump up to 512 MB, then to 1024, until a max of 4096 MB. Does all of the above suggest that MySQL is too "weak" for the task? Do you suggest using Oracle database? My professor believes that by using Java we can basically make up for any memory-management deficiencies that MySQL has in relation to Oracle DB. I'm new to MySQL , but have experience with Oracle. If all of the above sounds wishy-washy, it is because I'm still fleshing it out. thanks

    Read the article

  • How do I configure an Intel HD Graphics 4000?

    - by derabbink
    First off, please note that last night I already posted this question to a launchpad mailing list, so this could be considered a cross post. However, I think this is a better place to ask the same question The question: How can I configure my Ubuntu 12.04, with upgraded kernel (3.6), to use the Intel HD Graphics 4000 adapter? (Intel HD 4000 is the standard of 3rd gen Intel Core i7 (Ivy Bridge) graphics adapter) Some output: $ glxinfo name of display: :0 X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 154 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 $ cat /etc/X11/xorg.conf this is probably the farthest from what it should be Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Module" Load "glx" EndSection $ lspci I only listed the line I think are relevant. If you want more info in order to help me, please comment :) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 16:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] 16:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Turks HDMI Audio [Radeon HD 6000 Series]

    Read the article

  • Java and .NET cost of use [on hold]

    - by 1110
    I work with .NET technology stack for about 4 years. I am learning and enjoy working with ASP MVC framework and I never did anything serious in other languages. This is not the question like what is better (I read all similar questions). What interest me is the cost of switching. For example: If you are about to start a start-up company today and you are in my situation not too much money, some good idea that you think others will use and have a knowledge of .NET. In my head I have a few questions that I can't answer and I know that somebody with experience can: 1) Java & .NET hosting. Suppose shared hosting is not good enough anymore, your site has grown and you need more resources. How much Java services is cheaper compared to .NET? 2) I didn't follow hype about ORACLE will kill java long time. Does oracle show interest in investing in java. I mean is is safe to bet on java as a technology when starting start-up (basically did oracle show some will to destroy java platform)? 3) I am not sure what I am asking here. When you use Java you can use JEEE stack or Java with third party stack (spring, hibernate, maven etc.). I saw a lot of project that work with second option if web application is not enterprise level but social networking site for example which stack is best pick? Summary of this question is is it safe to jump in to Java learn it and build product based on it. It's not too hard for me to learn it. But how much can I get from it.

    Read the article

  • Screen flickering / scrambling on an Asus UL30A

    - by user55059
    Recently my Laptop screen started to flicker. You can view the phenomena here: YouTube Sometimes the screen is totally scrambled, but most of the time it starts with the Title bar only. It happens inconsistently. My Laptop is Asus UL30A and I'm using Ubuntu 11.10. Output from command: sudo lshw -C display; lsb_release -a; uname -a; xrandr *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:fe400000-fe7fffff memory:d0000000-dfffffff ioport:dc00(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:fe800000-fe8fffff LSB Version: core-2.0-ia32:core-2.0-noarch:core-3.0-ia32:core-3.0-noarch:core-3.1-ia32:core-3.1-noarch:core-3.2-ia32:core-3.2-noarch:core-4.0-ia32:core-4.0-noarch Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric Linux steelke 3.0.0-14-generic-pae #23-Ubuntu SMP Mon Nov 21 22:07:10 UTC 2011 i686 i686 i386 GNU/Linux Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 293mm x 164mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) I already rolled back the kernel to 3.0.0-14 instead of 3.0.0-17 as mentioned in this post, but without result. I guess the problem is related to the driver, because I don't see similar behaviour in the BIOS Setup. Any tips or help is welcome.

    Read the article

  • WIFI/LAN not working after Installing Ubuntu 13.10

    - by user183025
    I can't connect to my WIFI after installing Ubuntu 13.10. I tried re-installing it three times (thinking that I did something wrong during the installation) but I still can't connect to my WIFI. It just gives me the message that I'm offline and that I can't connect to my WIFI. I also tried connecting to the internet using LAN cable but with the same results. I tried google but it seems that there's no solution to this yet.... Anybody knows how to solve this? Thanks! FYI: H/W path Device Class Description ====================================================== system RC530/RC730 (To be filled by O.E.M.) /0 bus RC530/RC730 /0/0 memory 64KiB BIOS /0/4 processor Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz /0/4/5 memory 32KiB L1 cache /0/41 memory 4GiB System Memory /0/41/0 memory DIMM [empty] /0/41/1 memory 4GiB SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) /0/100 bridge 2nd Generation Core Processor Family DRAM Controller 02:00.0 Network controller: Intel Corporation Centrino Wireless-N 130 (rev 34) Subsystem: Intel Corporation Centrino Wireless-N 130 BGN Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f7200000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi Kernel modules: iwlwifi 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) Subsystem: Samsung Electronics Co Ltd Device c0c1 Flags: bus master, fast devsel, latency 0, IRQ 41 I/O ports at b000 [size=256] Memory at f2104000 (64-bit, prefetchable) [size=4K] Memory at f2100000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169

    Read the article

  • Blank screen during boot after clean Ubuntu 11.10 install (Intel N10 graphics)

    - by Coen
    After a clean install of Ubuntu 11.10 on my Asus eee PC 1005p, Ubuntu seems to boot correctly, except for initialization of the LCD screen. What I observe: I choose Ubuntu 11.10 in the GRUB 2 menu A blank screen with a blinking cursor in the top left of the screen, for 15-20 seconds. The ubuntu logo with 5 red dots in the center of the screen, for 1 second. The LCD screen is entirely blank The startup sound plays (Ubuntu is configured to auto-login) Still, the LCD screen is entirely blank. When I press Fn-F8 (the switch between LCD screen and external VGA), the LCD screen shows my desktop correctly and everything seems to work fine. Except for the adjust contrast buttons (Fn-F5 and Fn-F6), these seem to cycle through random brightness modes. Something like: 0% - 50% - 20% - 0% - 20% - 0% Any ideas what's causing this or how to solve this? coen@elpicu:~$ lspci -v 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f7e00000 (32-bit, non-prefetchable) [size=512K] I/O ports at dc00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at f7d00000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0 Memory at f7e80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied>

    Read the article

  • How do I use LibreOffice's 3d transitions in Impress?

    - by Lvkz
    How can I get the 3D transitions working on Impress? I got a presentation coming soon, and as a requirement of the course the professor want us to use transitions on our "Power Point" chapter, obviously I have been using LibreOffice in every exercise but the native transitions are kind of lame, so when I install the newer version of Ubuntu, always install the extra package to the transitions - I had installed the 3D package: libreoffice-ogltrans 1:3.4.3-3ubuntu2 In previous versions of Ubuntu and worked perfectly, but for some reason is not working in this release. I got LibreOffice 3.4.3, Ubuntu Oneiric Ocelot (11.10) and my hardware is not relevant because I had it working before on previous releases. I know is not critical, but for my class is a pretty important deal, and can be a perfect opportunity to show the class that the cool stuff are not only in Windows. As a recomendation of one of Eliah Kagan, I'm putting the output of: sudo lshw -C video *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:f6c00000-f6ffffff memory:e0000000-efffffff ioport:efe8(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:f6b00000-f6bfffff And I'm not using Unity - it don't there anyways -, I'm using instead Gnome Shell.

    Read the article

  • Is my graphics card in use or not?

    - by Lindhe94
    I have a Samsung Series 7 NP730U3E which is running Ubuntu Gnome 13.10. This computer have an Intel Core i5 3337U an AMD Radeon HD 8570M on the inside. Ubuntu 13.10 is said to have driver support for this graphics card, but I am not sure whether or not this is the case. When I check System Settings Details it says "Graphics: Intel® Ivybridge Mobile" and lspci | grep VGA returns VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09). But lshw -c video returns *-display description: Display controller product: Mars [Radeon HD 8730M] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:47 memory:e0000000-efffffff memory:f7e00000-f7e3ffff ioport:e000(size=256) memory:f7e40000-f7e5ffff *-display description: VGA compatible controller product: 3rd Gen Core processor Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:f7800000-f7bfffff memory:d0000000-dfffffff ioport:f000(size=64) What is the case? Is my graphics card is use, or do my laptop have undiscovered powers yet to yield?

    Read the article

< Previous Page | 470 471 472 473 474 475 476 477 478 479 480 481  | Next Page >