Search Results

Search found 27819 results on 1113 pages for 'linux intel'.

Page 475/1113 | < Previous Page | 471 472 473 474 475 476 477 478 479 480 481 482  | Next Page >

• iptables redirect single website traffic to port 8080

  - by Luke John Southard

  My goal is to be able to make a connection to one, and only one, website through a proxy. Everything else should be dropped. I have been able to do this successfully without a proxy with this code: ./iptables -I INPUT 1 -i lo -j ACCEPT ./iptabels -A OUTPUT -p udp --dport 53 -j ACCEPT ./iptables -A OUTPUT -p tcp -d www.website.com --dport 80 -j ACCEPT ./iptables -A INPUT -m conntrack --cstate ESTABLISHED,RELATED -j ACCEPT ./iptables -P INPUT DROP ./iptables -P OUTPUT DROP How could I do the same thing except redirect the traffic to port 8080 somewhere? I've been trying to redirect in the PREROUTING chain in the nat table. I'm unsure if this is the proper place to do that tho. Thanks for your help!

  Read the article

• USB webcam just works once and next time I've to reboot

  - by user30262

  I'm using Ubuntu 9.10, and a usb webcam that is shown as 'Bus 001 Device 005: ID 0ac8:3450 Z-Star Microelectronics Corp.' by lsusb. The problem is that on connecting the cam, it just works with the first program I start (skype, tokbox, messenger), and if I disconnect it or switch to another program, it stops to work and I have to restart my computer to make it work again. Has anyone else noticed this behaviour? Is there some good solution to reset the camera without rebooting to make it work again?

  Read the article

• Video Player/Library for Ubuntu with ratings and thumbs

  - by greggannicott

  Hi. I've just made the switch to Ubuntu on my main PC and I've been looking for a media player that can: Play all the usual video formats Rate (and ideally, tag) each file Display thumbnails for each file Other than that there isn't much I'm after. Banshee comes close, but doesn't display thumbnails. I've Google'd lots but I'm running out of search terms to try. Does anyone have any suggestions? Cheers!

  Read the article

• ssh -x : howto get clipboard?

  - by Gupu User

  Hello! I'm connected to a server via ssh -x and my only way to get text out of the system is the x clipboard (unless i want to take thousends of screenshots and OCR over it). I can not execute any programs on the other machine, because i don't have access. How can I achive this?

  Read the article

• Find command exclude files whose path match a certain pattern

  - by user40570

  I have a find command that looks for files that was modified recently and outputs the date find /path/on/server -mtime -1 -name '*.js' -exec ls -l {} \; I would like it to exclude any deeply nested folder that matches a certain pattern e.g. there are a number of folders that have a "statistics" directory and ".svn" directories. So i'd like to be able to say if the file that was modified yesterday is in a folder named statistics ignore it. Or perhaps not search for files in those folders at all.

  Read the article

• Le noyau Linux sort en version 3.15 et permet une mise en veille et une reprise plus rapides

  Le noyau Linux sort en version 3.15 et permet une mise en veille et une reprise plus rapides Comme il est de coutume, Linus Torvalds, le père du noyau Linux a annoncé la sortie de la version stable de Linux 3.15.Des améliorations de performances sont au coeur des modifications de cette troisième version du célèbre noyau open source depuis le début de cette année. Le nouveau Kernel réduit considérablement le temps de mise en veille et de reprise du système pour les ordinateurs portables.Le nouveau...

  Read the article

• Display CPU usage separately (without root privileges)

  - by synaptik

  I need to display the CPU usage for each processing core on a single shared-memory 12-core (SMP) machine. I don't have access to install htop, else I would simply use that. I don't need fancy graphs or meters, though they would be nice. For example, simply displaying: X X X X X X X X X X X X where each X is the percentage utilization of 1 of the 12 processing cores on my machine. FYI: I know I can simply look at the utilization in "top" and divide that number by the number of cores on my machine, but I prefer a solution that shows each core separately.

  Read the article

• How to rename all subfolders with a specific Name

  - by shane

  How to go through all the subfolders and rename all the folders named 'Old' to 'New'

  Read the article

• The Red Hat Enterprise Linux 6 Kernel: What Is It?

  The enterprise Linux OS vendor goes its own way when it comes to including a Linux kernel in its RHEL 6 release.

  Read the article

• yum security update - message indicating kernel version not up to date

  - by JMC

  Running yum --security check-update returns this message: Security: kernel-3.x.x-x.63 is an installed security update Security: kernel-3.x.x-x.29 is the currently running version I already ran the yum security update on the kernel, but it looks like it didn't change the version running on the system. What needs to be done to make it run the new kernel? Are there any concerns about why it didn't change during the installation process? The yum log just shows installed for the new kernel no error messages.

  Read the article

• How do I configure a swap partition using swapspace

  - by jcalfee314

  I finally have the swapspace project installed and running (via init.d). The purpose is to have a dynamically re-sizing swap partition. I'm clueless however on how to use it. It has good documentation but just does not go into that last step. How to I configure a swap partition using swapspace? The process is probably the same for any 3rd party program that would provide a swap space implementation to the kernel. I know this was intended to run as a process because the project provides an init.d script.

  Read the article

• Backing up 80G hard drive 1G per day

  - by barrycarter

  I want to securely backup my 80G HD, but doing a complete backup takes forever and slows down my machine, so I want to backup just 1G per day. Details: % First hurdle: on the first day, I want to backup the "first" 1G of the hard drive. Of course, there really is no "first" 1G on a hard drive. % After 80 days, I'll have my whole HD backed up... assuming none of my files ever change, which of course they do. So the backup plan/program must also catch file creation/changes as they come along. % The backups must be consistent, in that I can restore my system by restoring the backups sequentially. In other words, "dd if=/harddrive" probably won't work. % The backups should encrypt file contents AND names, but I don't see this as a major hurdle. % Once the backup has backed up everything (even changed files), it can re-backup the first 1G on my hard drive. Even though this backup is redundant, that's OK, because I always want to be backing up something (eg, if I'm backing up to optical media, the older media might start going corrupt). Is there a magic backup plan/program that does this? In reality, I want to do this for multiple machines with multiple drives each, but think that solving the above will solve the general case.

  Read the article

• Is Ubuntu 10.04 suitable for working on for web development

  - by wombart

  Hi everyone, Im just wondering what everyone's experiences are with the latest Ubuntu 10.04 version? Is it stable enough for a working environment? I require it for web development, so using VMs, IDEs, connecting to VPNs, SSH to servers, etc. Im currently using 9.04 and found 9.10 unstable and problematic at times (such as problems connecting to VPN) Any input would be appreciated, thanks!

  Read the article

• how to enable command line autocomplete after sqlite

  - by Donnied

  Once upon a time when I started sqlite from the command line I could using the tabbing autocomplete to enter the database name. This has not worked for a while now. Any suggestions on how to do this? (Possibly specifically for files with a .db suffix.)

  Read the article

• OpenSSH (Windows) does not forward X11

  - by Shulhi Sapli

  I'm running Ubuntu 13.04 in VM and I wanted to do X11 forwarding to my host (Win 8), so far it works fine using PuTTY and XMing server for Windows. But I am curious why it doesn't work if I use OpenSSH binaries (it comes together with Git for windows). This is what I've done so far: ssh -X [email protected] (also tried with -Y) then gedit but received error of Cannot open display. echo $DISPLAY came out as empty. So, I try to export DISPLAY=localhost:0.0 but it still won't work. The DISPLAY environment that I set is exactly as when it runs with Putty. I also try changing the DISPLAY to 192.168.2.3:0.0 and other display number as well, but still it won't work. Of course I could just use Putty to make it work, but I was wondering why OpenSSH binaries does not work. I have enabled all settings required in both /etc/ssh/ssh_config and /etc/ssh/sshd_config. If I run with -v option, this is what I get F:\SkyDrive\Projects> ssh -X -v [email protected] OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug1: Connecting to 192.168.2.3 [192.168.2.3] port 22. debug1: Connection established. debug1: identity file /c/Users/Shulhi/.ssh/identity type -1 debug1: identity file /c/Users/Shulhi/.ssh/id_rsa type -1 debug1: identity file /c/Users/Shulhi/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1p1 Debian-4 debug1: match: OpenSSH_6.1p1 Debian-4 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_4.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '192.168.2.3' is known and matches the RSA host key. debug1: Found key in /c/Users/Shulhi/.ssh/known_hosts:2 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /c/Users/Shulhi/.ssh/identity debug1: Trying private key: /c/Users/Shulhi/.ssh/id_rsa debug1: Next authentication method: password [email protected]'s password: It seems that there is no request for X11 (I'm not sure if there is should be one too here). Any pointers why it doesn't work?

  Read the article

• I can connect to Samba server but cannot access shares.

  - by jlego

  I'm having trouble getting samba sharing working to access shares. I have setup a stand-alone box running Fedora 16 to use as a file-sharing and web development server. It needs to be able to share files with a Windows 7 PC and a Mac running OSX Snow Leopard. I've setup Samba using the Samba configuration GUI tool on Fedora. Added users to Fedora and connected them as Samba users (which are the same as the Windows and Mac usernames and passwords). The workgroup name is the same as the Windows workgroup. Authentication is set to User. I've allowed Samba and Samba client through the firewall and set the ethernet to a trusted port in the firewall. Both the Windows and Mac machines can connect to the server and view the shares, however when trying to access the shares, Windows throws error: 0x80070035 " Windows cannot access \\SERVERNAME\ShareName." Windows user is not prompted for a username or password when accessing the server (found under "Network Places"). This also happens when connecting with the IP rather than the server name. The Mac can also connect to the server and see the shares but when choosing a share gives the error: The original item for ShareName cannot be found. When connecting via IP, the Mac user is prompted for username and password, which when authenticated gives a list of shares, however when choosing a share to connect to, the error is displayed and the user cannot access the share. Since both machines are acting similarly when trying to access the shares, I assume it is an issue with how Samba is configured. smb.conf: [global] workgroup = workgroup server string = Server log file = /var/log/samba/log.%m max log size = 50 security = user load printers = yes cups options = raw printcap name = lpstat printing = cups [homes] comment = Home Directories browseable = no writable = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes printable = yes [FileServ] comment = FileShare path = /media/FileServ read only = no browseable = yes valid users = user1, user2 [webdev] comment = Web development path = /var/www/html/webdev read only = no browseable = yes valid users = user1 How do I get samba sharing working? UPDATE: I Figured it out, it was because I was sharing a second hard drive. See checked answer below. Speculation 1: Before this box I had another box with the same version of fedora installed (16) and samba working for these same computers. I started up the old machine and copied the smb.conf file from the old machine to the new one (editing the share definitions for the new shares of course) and I still get the same errors on both client machines. The only difference in environment is the hardware and the router. On the old machine the router received a dynamic public IP and assigned dynamic private IPs to each device on the network while the new machine is connected to a router that has a static public IP (still dynamic internal IPs though.) Could either one of these be affecting Samba? Speculation 2: As the directory I am trying to share is actually an entire internal disk, I have tried these things: 1.) changing the owner of the mounted disk from root to my user (which is the same username as on the Windows machine) 2.) made a share that only included one of the folders on the disk instead of the entire disk with my user again as the owner. Both tests failed giving me the same errors regarding the network address. Speculation 3: Whenever I try to connect to the share on the Windows 7 client I am prompted for my username and password. When I enter the correct credentials I get an access denied message. However I did notice that under the login box "domain: WINDOWS-PC-NAME" is listed. I believe this could very well be the problem. Speculation 4: So I've completely reinstalled Fedora and Samba now. I've created a share on the first harddrive (one fedora is installed on) and I can access that fine from Windows. However when I try to share any data on the second disk, I am receiving the same error. This I believe is the problem. I think I need to change some things in fstab or fdisk or something. Speculation 5: So in fstab I mapped the drive to automount in a folder which works correctly. I also added the samba_share_t SElinux label to the mountpoint directory which now allows me to access the shares on the Windows machine, however I cannot see any of the files in the directory on the windows machine. (They are there, I can see them in the fedora file browser locally)

  Read the article

• Open application in background without losing current window focus. Fedora 17, Gnome 3

  - by Ishan

  I'm running a script in the background which loads an image with feh depending on which application is currently in focus. However, whenever the script opens the image, window focus is lost to feh. I was able to circumvent this by using xdotool to switch back to the application that was originally in focus, but this introduces a short annoying period of time where the focus is switched from feh to the application. My question is this: is there any way to launch feh in the background such that window focus is NOT lost? System: Fedora 17, Gnome 3, Bash Thanks a ton!

  Read the article

• How to setup IP alias on bridged interface in Ubuntu

  - by Anonymouslemming

  How do I setup an IP alias on a bridge (br0) device on Ubuntu ? If I wait for br0 to come up and then do /sbin/ifconfig br0:0 192.168.10.1 netmask 255.255.255.0 then it works fine. If however I add the following to my /etc/network/interfaces file, it does not work and the network fails to start: auto br0:0 iface br0:0 inet static address 192.168.10.1 netmask 255.255.255.0 At the moment, I have a script in /etc/network/if-up.d/bridge_alias that does this as follows: #!/bin/bash if [ "${LOGICAL}" == "br0" ] && [ "${PHASE}" = "post-up" ]; then echo -n "Starting br0:0 ... " /sbin/ifconfig br0:0 192.168.10.2 netmask 255.255.255.0 echo "Done!" fi What is the right way of doing this though, just using the OS network config files ?

  Read the article

• Getting PAM/user info into php - something like Net_Finger instead of a db?

  - by digitaltoast

  I've got a very small user group who just need to login, upload, check and then move specific files to a different area when ready. Right now, I use the nginx PAM auth module to log them in against their unix accounts. As their login is their home directory, I've already got the info to send the uploads to the right area - one line of php and no database needed. But I'm maintaining a separate DB just so PHP can welcome them, grab their email and send them an email when processed. Yes, sure I could use nosql or sqlite instead so as to not need a whole mysql install. But it occurred to me that as I've got all these blank user fields for phone numbers I could populate with any data, that I could use something like php's Net_Finger. Which failed for me with: sudo pear install Net_Finger Starting to download Net_Finger-1.0.1.tgz (1,618 bytes) ....done: 1,618 bytes could not extract the package.xml file from "/build/buildd/php5-5.5.9+dfsg/pear-build-download/Net_Finger-1.0.1.tgz" Download of "pear/Net_Finger" succeeded, but it is not a valid package archive Error: cannot download "pear/Net_Finger" At which point I thought I'd stop, and take a ServerFault reality check - is this a really bad/dangerous/stupid idea just to stop me having to maintain details in two places rather than one? It there a better way? Googling shows that it's not an oft-asked thing, so perhaps with good reason?

  Read the article

• Rsync to take the newest file. And a cron job?

  - by user1704877

  I have a log file on two different servers. The servers are under a load balancer so half the traffic goes to one server, and half the traffic goes to the other server. I need to take the newest log file from one machine and transfer that log file to the other machine. So if one log file is changed on one server, it gets updated on the other server. I think I need to use rsync. And do I also need to put it in a cron job?

  Read the article

• mysql on ubunto 4 is not running and is not remotely accessible

  - by user628119

  Currently i installed ubunot on ubunto 4.4, and using following commands i can see mysql, mysqld running ps -ef | grep mysql ps -ef | grep mysqld but when I run, netstat i don't see mysql and 3306 anywhere. in my.cnf file, i have given my ip and port is 3306. also when i run this command sudo netstat -tap | grep mysql i don't see anything and commands I needed to run the mysql 5 on port 3306 and on ip=x.x.x.x for remotely accessible Looking forward to your reply

  Read the article

• query keepalived

  - by tdimmig

  *Note: I have trouble deciding what should go in serverfault and what should go in superuser, if some kindly admin decides this is in the wrong place please move it for me - many thanks. I am implementing a basic HA system with keepalived. I only want to be notified of the failover in the case of hardware failure. I do, however, have the servers switch roles periodically. I have a track_script running on the backup that will vary it's return between 0 and 1 on an interval (once a week, once a month, whatever). Upon returning 0, the priority is raised above that of the master, upon returning 1 the priority is lowered again. This way they trade places on the configured interval. The question: What can I do to tell the difference between a switch caused by my script, and a switch caused because one of the servers died? I certainly want to be notified when there is an actual problem, but not every time the servers change places because of the script. I see that version 1.2.7 has snmp support and I may be able to use it to get some information that could tell me one way or another, but to be honest I've never used snmp before and I don't know how to get the information I want with it (my Google foo failed me).

  Read the article

• Backup all plesk MySQL Databases to individual files

  - by Michael

  Hy, Because I'm new to shell scripting I need a hand. I currently backup all mydatabases to a single file, thing that makes the restore preaty hard. The second problem that my MySQL password dosen't work because of a Plesk bug and i get the password from "/etc/psa/.psa.shadow". Here is the code that I use to backup all my databases to a single file. mysqldump -uadmin -p`cat /etc/psa/.psa.shadow` --all-databases | bzip2 -c > /root/21.10.2013.sql.bz2 I found some scripts on the web that backup each database to individual files but I don't know how to make them work for my situation. Here is a example script: for db in $(mysql -e 'show databases' -s --skip-column-names); do mysqldump $db | gzip > "/backups/mysqldump-$(hostname)-$db-$(date +%Y-%m-%d-%H.%M.%S).gz"; done Can someone help me make the script above work for my situation? Requirements: Backup each database to individual file using plesk password location.

  Read the article

• How to version lock packages in Ubuntu?

  - by Sandra

  On CentOS exists the yum versionlock option, where you can lock a package to a specific version, so it is never upgraded past that. I would like that puppet-server-2.7.19-1 puppet-2.7.19-1 stays on 2.7, and never upgraded to 3.0. Puppet Labs have released 3.0 and put it into the stable repo, so 2.7 will get upgraded to 3.0, which is not backwards compatible. Does Ubuntu have something similar to yum versionlock?

  Read the article

• Almost All Logical Volumes Disappeared - Recovery?

  - by Alex

  We had a hard disc crash of one of two hard discs in a software raid with a LVM on top. The server is running Citrix xenserver. On the hard disk which is still intact, the volume group gets detected well, but only one LV is left. (some hashes replaced by "x") # lvdisplay --- Logical volume --- LV Name /dev/VG_XenStorage-x-x-x-x-408b91acdcae/MGT VG Name VG_XenStorage-x-x-x-x-408b91acdcae LV UUID x-x-x-x-x-x-vQmZ6C LV Write Access read/write LV Status available # open 0 LV Size 4.00 MiB Current LE 1 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 root@rescue ~ # vgdisplay --- Volume group --- VG Name VG_XenStorage-x-x-x-x-408b91acdcae System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 698.62 GiB PE Size 4.00 MiB Total PE 178848 Alloc PE / Size 1 / 4.00 MiB Free PE / Size 178847 / 698.62 GiB VG UUID x-x-x-x-x-x-53w0kL I could understand if a full physical volume is lost - but why only the logical volumes? Is there any explanation for this? Is there any way to recover the logical volumes? EDIT We are here in a rescue system. The problem is that the whole server does not boot (GRUB error 22) What we are trying to do is to access the root filesystem. But everything was in the LVM. We have only this: (parted) print Model: ATA SAMSUNG HD753LJ (scsi) Disk /dev/sdb: 750GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 750GB 750GB primary boot, lvm And this 750GB LVM volume is exactly what we see on top.

  Read the article

< Previous Page | 471 472 473 474 475 476 477 478 479 480 481 482  | Next Page >