Search Results

Search found 18592 results on 744 pages for 'basic unix commands'.

Page 476/744 | < Previous Page | 472 473 474 475 476 477 478 479 480 481 482 483  | Next Page >

• Built-in network card not working?

  - by Zeeshan

  Hi, I am new to Ubuntu. I have installed Ubuntu 9.04(Jaunty). After installation I found that network card is not wokring. And id doest not list in "System Preferenes Network Connections" So , i got another card from my friend and try to search on internat about my problem but still cant find solution. Some commands output is here which may be help to solve problem root@mzeeshan-desktop:/home/mzeeshan# uname -r 2.6.28-11-generic root@mzeeshan-desktop:/home/mzeeshan# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:02:44:4a:45:12 inet addr:192.168.5.37 Bcast:192.168.5.255 Mask:255.255.255.0 inet6 addr: fe80::202:44ff:fe4a:4512/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3774 errors:0 dropped:0 overruns:0 frame:0 TX packets:3611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4307045 (4.3 MB) TX bytes:583067 (583.0 KB) Interrupt:22 Base address:0x1000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240 (240.0 B) TX bytes:240 (240.0 B) pan0 Link encap:Ethernet HWaddr 5e:25:17:a1:18:ac BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@mzeeshan-desktop:/home/mzeeshan# lspci 00:00.0 Host bridge: Intel Corporation Device 0069 (rev 12) 00:01.0 PCI bridge: Intel Corporation Auburndale/Havendale PCI Express x16 Root Port (rev 12) 00:19.0 Ethernet controller: Intel Corporation Device 10f0 (rev 05) 00:1a.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 1 (rev 05) 00:1c.4 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 5 (rev 05) 00:1c.6 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 7 (rev 05) 00:1c.7 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 8 (rev 05) 00:1d.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Ibex Peak LPC Interface Controller (rev 05) 00:1f.2 IDE interface: Intel Corporation Ibex Peak 4 port SATA IDE Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 05) 00:1f.5 IDE interface: Intel Corporation Ibex Peak 2 port SATA IDE Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) 06:00.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07) 06:00.1 Input device controller: Creative Labs SB Live! Game Port (rev 07) 06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) root@mzeeshan-desktop:/home/mzeeshan# Motherboard is Intel DP55WG. I don't know what to do next. Any help will be greatly appreciated.. Thanks

  Read the article

• SPARC T5-8 Servers EMEA Acceleration Promotion for Partners

  - by mseika

  Dear all We are pleased to announce the EMEA T5-8 Acceleration Promotion, a price promotion that, for a limited time, makes the T5-8 server available to our EMEA partners at a very attractive discount. Why the SPARC T5-8 server Oracle's SPARC servers running Oracle Solaris are ideal for mission-critical applications requiring high performance, best-in-class availability, and unmatched scalability on all application tiers. SPARC servers include built-in virtualization, systems management, and security at no additional cost. Designed for applications that demand the highest performance and 24x7 availability. Oracle's SPARC T5-8 server is the fastest and the most advanced, scalable midrange server in the Oracle portfolio. The Oracle SPARC T5-8 server is in the sweet spot of the UNIX midrange, and directly competing with IBM P770(+) and P780(+) systems, with a 7x price advantage (see official Oracle press release) over a similarly configured P780 system! What are we offering Effective immediately, the fully-configured T5-8 server is available to VADs with a 38% discount off price list: this is 8 additional points on top of the standard 30% contractual discount. The promo will be communicated to VADs and VARs, and VADs are expected to pass the additional discount through to the VARs. Resellers will be encouraged to use this attractive price to position T5-8 versus the competition, accelerate T5-8 sales, and use the increased margin to offer additional services to their end users - thus expanding their footprint within their customers and making the T5-8 business proposition even more compelling. This is a unique opportunity for partners to expand their base and beat the competition with a 7x price advantage over a similarly configured IBM P780. This price promotion is only available to OPN Partners, and is valid until November 30, 2013. What's in it for Partners  More competitive price More customer budget available for more projects: attach migration services, training, ... Opportunity to attach Storage, and additional Software Higher win rate Additional Details The promotion is valid for the existing configurations of T5-8 with 8 CPU and different memory configurations, including all X-options that are part of the system and ordered at the same time. 8% additional discount to the VAD on full T5-8 - Including X-Options: Cat V (30% + 8% additional): System, CPU, Memory, Disks, Ethernet Cat U (22% + 8% additional): Infiniband HCA Cat W (30% + 8% additional): FC/SAS HBA / FCoE CNA Partner eligibilty criteria Standard requirements apply. Partners must: be an OPN member in good standing, at Gold level or above meet the Resale criteria in the SPARC T-Series servers Knowledge Zone have a right to distribute hardware via the Full Use Distribution Agreement, with Hardware Addendum if applicable. Order process The promotion is available until November 30, 2013. VADs place the order via Oracle Partner Store. A request for extra-discount has to be raised in advance using the standard process for available configs: input the configuration apply the suggested discounts submit the request in the request documentation, please refer to EMEA T5-8 FY14H1 Channel Promotion as approved in GDMT GT-EB2-Q413-107C This promotion is only valid for the T5-8 configurations stated in this announcement. Any change, or additional products / items not listed explicitly, can be ordered at the same time and will follow standard approval process. Key contacts Your local A&C organization For questions on EMEA Partner Programs for Servers: Giuseppe Facchetti For questions on the T5-8 product: Martin de Jong Best regards, Olivier Tordo Senior Director, Sales & Strategy, Hardware SolutionsEMEA Alliances & Channels Paul Flannery Senior Director, EMEA Servers Product Management

  Read the article

• SPARC T5-8 Servers EMEA Acceleration Promotion for Partners

  - by mseika

  Dear all We are pleased to announce the EMEA T5-8 Acceleration Promotion, a price promotion that, for a limited time, makes the T5-8 server available to our EMEA partners at a very attractive discount. Why the SPARC T5-8 server Oracle's SPARC servers running Oracle Solaris are ideal for mission-critical applications requiring high performance, best-in-class availability, and unmatched scalability on all application tiers. SPARC servers include built-in virtualization, systems management, and security at no additional cost. Designed for applications that demand the highest performance and 24x7 availability. Oracle's SPARC T5-8 server is the fastest and the most advanced, scalable midrange server in the Oracle portfolio. The Oracle SPARC T5-8 server is in the sweet spot of the UNIX midrange, and directly competing with IBM P770(+) and P780(+) systems, with a 7x price advantage (see official Oracle press release) over a similarly configured P780 system! What are we offering Effective immediately, the fully-configured T5-8 server is available to VADs with a 38% discount off price list: this is 8 additional points on top of the standard 30% contractual discount. The promo will be communicated to VADs and VARs, and VADs are expected to pass the additional discount through to the VARs. Resellers will be encouraged to use this attractive price to position T5-8 versus the competition, accelerate T5-8 sales, and use the increased margin to offer additional services to their end users - thus expanding their footprint within their customers and making the T5-8 business proposition even more compelling. This is a unique opportunity for partners to expand their base and beat the competition with a 7x price advantage over a similarly configured IBM P780. This price promotion is only available to OPN Partners, and is valid until November 30, 2013. What's in it for Partners  More competitive price More customer budget available for more projects: attach migration services, training, ... Opportunity to attach Storage, and additional Software Higher win rate Additional Details The promotion is valid for the existing configurations of T5-8 with 8 CPU and different memory configurations, including all X-options that are part of the system and ordered at the same time. 8% additional discount to the VAD on full T5-8 - Including X-Options: Cat V (30% + 8% additional): System, CPU, Memory, Disks, Ethernet Cat U (22% + 8% additional): Infiniband HCA Cat W (30% + 8% additional): FC/SAS HBA / FCoE CNA Partner eligibilty criteria Standard requirements apply. Partners must: be an OPN member in good standing, at Gold level or above meet the Resale criteria in the SPARC T-Series servers Knowledge Zone have a right to distribute hardware via the Full Use Distribution Agreement, with Hardware Addendum if applicable. Order process The promotion is available until November 30, 2013. VADs place the order via Oracle Partner Store. A request for extra-discount has to be raised in advance using the standard process for available configs: input the configuration apply the suggested discounts submit the request in the request documentation, please refer to EMEA T5-8 FY14H1 Channel Promotion as approved in GDMT GT-EB2-Q413-107C This promotion is only valid for the T5-8 configurations stated in this announcement. Any change, or additional products / items not listed explicitly, can be ordered at the same time and will follow standard approval process. Key contacts Your local A&C organization For questions on EMEA Partner Programs for Servers: Giuseppe Facchetti For questions on the T5-8 product: Martin de Jong Best regards, Olivier Tordo Senior Director, Sales & Strategy, Hardware SolutionsEMEA Alliances & Channels Paul Flannery Senior Director, EMEA Servers Product Management

  Read the article

• SPARC T5-8 Servers EMEA Acceleration Promotion for Partners

  - by mseika

  Dear all We are pleased to announce the EMEA T5-8 Acceleration Promotion, a price promotion that, for a limited time, makes the T5-8 server available to our EMEA partners at a very attractive discount. Why the SPARC T5-8 server Oracle's SPARC servers running Oracle Solaris are ideal for mission-critical applications requiring high performance, best-in-class availability, and unmatched scalability on all application tiers. SPARC servers include built-in virtualization, systems management, and security at no additional cost. Designed for applications that demand the highest performance and 24x7 availability. Oracle's SPARC T5-8 server is the fastest and the most advanced, scalable midrange server in the Oracle portfolio. The Oracle SPARC T5-8 server is in the sweet spot of the UNIX midrange, and directly competing with IBM P770(+) and P780(+) systems, with a 7x price advantage (see official Oracle press release) over a similarly configured P780 system! What are we offering Effective immediately, the fully-configured T5-8 server is available to VADs with a 38% discount off price list: this is 8 additional points on top of the standard 30% contractual discount. The promo will be communicated to VADs and VARs, and VADs are expected to pass the additional discount through to the VARs. Resellers will be encouraged to use this attractive price to position T5-8 versus the competition, accelerate T5-8 sales, and use the increased margin to offer additional services to their end users - thus expanding their footprint within their customers and making the T5-8 business proposition even more compelling. This is a unique opportunity for partners to expand their base and beat the competition with a 7x price advantage over a similarly configured IBM P780. This price promotion is only available to OPN Partners, and is valid until November 30, 2013. What's in it for Partners  More competitive price More customer budget available for more projects: attach migration services, training, ... Opportunity to attach Storage, and additional Software Higher win rate Additional Details The promotion is valid for the existing configurations of T5-8 with 8 CPU and different memory configurations, including all X-options that are part of the system and ordered at the same time. 8% additional discount to the VAD on full T5-8 - Including X-Options: Cat V (30% + 8% additional): System, CPU, Memory, Disks, Ethernet Cat U (22% + 8% additional): Infiniband HCA Cat W (30% + 8% additional): FC/SAS HBA / FCoE CNA Partner eligibilty criteria Standard requirements apply. Partners must: be an OPN member in good standing, at Gold level or above meet the Resale criteria in the SPARC T-Series servers Knowledge Zone have a right to distribute hardware via the Full Use Distribution Agreement, with Hardware Addendum if applicable. Order process The promotion is available until November 30, 2013. VADs place the order via Oracle Partner Store. A request for extra-discount has to be raised in advance using the standard process for available configs: input the configuration apply the suggested discounts submit the request in the request documentation, please refer to EMEA T5-8 FY14H1 Channel Promotion as approved in GDMT GT-EB2-Q413-107C This promotion is only valid for the T5-8 configurations stated in this announcement. Any change, or additional products / items not listed explicitly, can be ordered at the same time and will follow standard approval process. Key contacts Your local A&C organization For questions on EMEA Partner Programs for Servers: Giuseppe Facchetti For questions on the T5-8 product: Martin de Jong Best regards, Olivier Tordo Senior Director, Sales & Strategy, Hardware SolutionsEMEA Alliances & Channels Paul Flannery Senior Director, EMEA Servers Product Management

  Read the article

• SPARC T5-8 Servers EMEA Acceleration Promotion for Partners

  - by mseika

  Dear all We are pleased to announce the EMEA T5-8 Acceleration Promotion, a price promotion that, for a limited time, makes the T5-8 server available to our EMEA partners at a very attractive discount. Why the SPARC T5-8 server Oracle's SPARC servers running Oracle Solaris are ideal for mission-critical applications requiring high performance, best-in-class availability, and unmatched scalability on all application tiers. SPARC servers include built-in virtualization, systems management, and security at no additional cost. Designed for applications that demand the highest performance and 24x7 availability. Oracle's SPARC T5-8 server is the fastest and the most advanced, scalable midrange server in the Oracle portfolio. The Oracle SPARC T5-8 server is in the sweet spot of the UNIX midrange, and directly competing with IBM P770(+) and P780(+) systems, with a 7x price advantage (see official Oracle press release) over a similarly configured P780 system! What are we offering Effective immediately, the fully-configured T5-8 server is available to VADs with a 38% discount off price list: this is 8 additional points on top of the standard 30% contractual discount. The promo will be communicated to VADs and VARs, and VADs are expected to pass the additional discount through to the VARs. Resellers will be encouraged to use this attractive price to position T5-8 versus the competition, accelerate T5-8 sales, and use the increased margin to offer additional services to their end users - thus expanding their footprint within their customers and making the T5-8 business proposition even more compelling. This is a unique opportunity for partners to expand their base and beat the competition with a 7x price advantage over a similarly configured IBM P780. This price promotion is only available to OPN Partners, and is valid until November 30, 2013. What's in it for Partners  More competitive price More customer budget available for more projects: attach migration services, training, ... Opportunity to attach Storage, and additional Software Higher win rate Additional Details The promotion is valid for the existing configurations of T5-8 with 8 CPU and different memory configurations, including all X-options that are part of the system and ordered at the same time. 8% additional discount to the VAD on full T5-8 - Including X-Options: Cat V (30% + 8% additional): System, CPU, Memory, Disks, Ethernet Cat U (22% + 8% additional): Infiniband HCA Cat W (30% + 8% additional): FC/SAS HBA / FCoE CNA Partner eligibilty criteria Standard requirements apply. Partners must: be an OPN member in good standing, at Gold level or above meet the Resale criteria in the SPARC T-Series servers Knowledge Zone have a right to distribute hardware via the Full Use Distribution Agreement, with Hardware Addendum if applicable. Order process The promotion is available until November 30, 2013. VADs place the order via Oracle Partner Store. A request for extra-discount has to be raised in advance using the standard process for available configs: input the configuration apply the suggested discounts submit the request in the request documentation, please refer to EMEA T5-8 FY14H1 Channel Promotion as approved in GDMT GT-EB2-Q413-107C This promotion is only valid for the T5-8 configurations stated in this announcement. Any change, or additional products / items not listed explicitly, can be ordered at the same time and will follow standard approval process. Key contacts Your local A&C organization For questions on EMEA Partner Programs for Servers: Giuseppe Facchetti For questions on the T5-8 product: Martin de Jong Best regards, Olivier Tordo Senior Director, Sales & Strategy, Hardware SolutionsEMEA Alliances & Channels Paul Flannery Senior Director, EMEA Servers Product Management

  Read the article

• Is there a better term than "smoothness" or "granularity" to describe this language feature?

  - by Chris Stevens

  One of the best things about programming is the abundance of different languages. There are general purpose languages like C++ and Java, as well as little languages like XSLT and AWK. When comparing languages, people often use things like speed, power, expressiveness, and portability as the important distinguishing features. There is one characteristic of languages I consider to be important that, so far, I haven't heard [or been able to come up with] a good term for: how well a language scales from writing tiny programs to writing huge programs. Some languages make it easy and painless to write programs that only require a few lines of code, e.g. task automation. But those languages often don't have enough power to solve large problems, e.g. GUI programming. Conversely, languages that are powerful enough for big problems often require far too much overhead for small problems. This characteristic is important because problems that look small at first frequently grow in scope in unexpected ways. If a programmer chooses a language appropriate only for small tasks, scope changes can require rewriting code from scratch in a new language. And if the programmer chooses a language with lots of overhead and friction to solve a problem that stays small, it will be harder for other people to use and understand than necessary. Rewriting code that works fine is the single most wasteful thing a programmer can do with their time, but using a bazooka to kill a mosquito instead of a flyswatter isn't good either. Here are some of the ways this characteristic presents itself. Can be used interactively - there is some environment where programmers can enter commands one by one Requires no more than one file - neither project files nor makefiles are required for running in batch mode Can easily split code across multiple files - files can refeence each other, or there is some support for modules Has good support for data structures - supports structures like arrays, lists, and especially classes Supports a wide variety of features - features like networking, serialization, XML, and database connectivity are supported by standard libraries Here's my take on how C#, Python, and shell scripting measure up. Python scores highest. Feature C# Python shell scripting --------------- --------- --------- --------------- Interactive poor strong strong One file poor strong strong Multiple files strong strong moderate Data structures strong strong poor Features strong strong strong Is there a term that captures this idea? If not, what term should I use? Here are some candidates. Scalability - already used to decribe language performance, so it's not a good idea to overload it in the context of language syntax Granularity - expresses the idea of being good just for big tasks versus being good for big and small tasks, but doesn't express anything about data structures Smoothness - expresses the idea of low friction, but doesn't express anything about strength of data structures or features Note: Some of these properties are more correctly described as belonging to a compiler or IDE than the language itself. Please consider these tools collectively as the language environment. My question is about how easy or difficult languages are to use, which depends on the environment as well as the language.

  Read the article

• ath9k driver does not weak up

  - by shantanu

  I know this is common question but i found no suitable answer, so i am asking this again. I installed ubuntu 11.10. I found the bug for ath9k, so set first network boot from BIOS menu. That's worked. I have upgraded to 12.04 yesterday. Now ath9k is creating problem again. First network boot is still enable. ath9k works at start. But failed(connect again and again) after couple of minutes. dmesg show error that it can not weak up in 500us. So i tried #compat-wireless-3.5.1-1. But result is same. I have also added #nohwcrypt=1 option in /etc/modeprob.d/ath9k.conf. Still no luck. I tried #rmmod and then modprobe sudo modprobe ath9k nohwcrypt=1 dmesg shows me error: [ 400.690086] ath9k: Driver unloaded [ 406.214329] ath9k 0000:06:00.0: enabling device (0000 -> 0002) [ 406.214348] ath9k 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 406.214368] ath9k 0000:06:00.0: setting latency timer to 64 [ 406.428517] ath9k 0000:06:00.0: Failed to initialize device [ 406.428852] ath9k 0000:06:00.0: PCI INT A disabled [ 406.428887] ath9k: probe of 0000:06:00.0 failed with error -5 dmesg error when driver fail: 355.023521] ath: Chip reset failed [ 355.023524] ath: Unable to reset channel, reset status -22 [ 355.023556] ath: Unable to set channel [ 355.088569] ath: Failed to stop TX DMA, queues=0x10f! [ 355.122708] ath: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff [ 355.122714] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up [ 355.263962] ath: Chip reset failed [ 355.263966] ath: Unable to reset channel (2437 MHz), reset status -22 [ 358.996063] ath: Failed to wakeup in 500us [ 364.004182] ath: Failed to wakeup in 500us I can not install fresh ubuntu because i have lots of application installed. System : Acer Aspire 4250 AMD dual core 1.6GHZ Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) EDITED Now i am in serious problem. No wifi device is not showing in ifconfig or lshw commands. Only ether-net interface shows. I tried (FN + WIFI) several times to enable the device but nothing helps. Now I have installed fresh ubuntu 12.04. Please help lshw -c network: *-network description: Ethernet interface product: 82566DC Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 02 serial: 00:19:d1:7a:8e:f9 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.0.0-k duplex=full firmware=1.1-0 ip=192.168.1.114 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:45 memory:90300000-9031ffff memory:90324000-90324fff ioport:20c0(size=32) rfkill command does not show anything but no error.

  Read the article

• no volume in kubuntu 10.04

  - by neha

  hello,I am having both gnome and kde on my system.as my gnome is working perfectly but in KDE is there is no sound being generated. output of apley -l and lspci commands is as follows.. neha@neha-laptop:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: INTEL HDMI [INTEL HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 and output of lspci command is: neha@neha-laptop:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 02:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 02:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 02:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12) 02:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 02:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12) 0b:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01) can anyone help me??

  Read the article

• Ubuntu Preseed set Norwegian Keyboard?

  - by Vangelis Tasoulas

  It's been a couple of days now that I am trying to make a fully automated unattended installation. I managed to make it work with Ubuntu/Cobbler and a preseed file, but I cannot set the correct keyboard layout which is Norwegian in this case. I am doing the tests on a virtual machine and when I am going with a normal manual installation (no preseed) everything is working fine. When I am using the preseed file, I always end up with an "English (US)" keyboard no matter the many different options I have tried. I can change it manually with the "dpkg-reconfigure keyboard-configuration" command, but that's not the case. It should be handled automatically using the preseed file. I am using DEBCONF_DEBUG=5 when the grub is loading, and as I see in "/var/log/installer/syslog" file after the installation has finished, the preseeding commands are accepted. Can anyone help on this? The preseed file I am using is following: d-i debian-installer/country string NO d-i debian-installer/language string en_US:en d-i debian-installer/locale string en_US.UTF-8 d-i console-setup/ask_detect boolean false d-i keyboard-configuration/layout select Norwegian d-i keyboard-configuration/variant select Norwegian d-i keyboard-configuration/modelcode string pc105 d-i keyboard-configuration/layoutcode string no d-i keyboard-configuration/xkb-keymap select no d-i netcfg/choose_interface select auto d-i netcfg/get_hostname string myhostname d-i netcfg/get_domain string simula.no d-i hw-detect/load_firmware boolean true d-i mirror/country string manual d-i mirror/http/hostname string ftp.uninett.no d-i mirror/http/directory string /ubuntu d-i mirror/http/proxy string http://10.0.1.253:3142/ d-i mirror/codename string precise d-i mirror/suite string precise d-i clock-setup/utc boolean true d-i time/zone string Europe/Oslo d-i clock-setup/ntp boolean true d-i clock-setup/ntp-server string 10.0.1.254 d-i partman-auto/method string lvm partman-auto-lvm partman-auto-lvm/new_vg_name string vg0 d-i partman-auto/purge_lvm_from_device boolean true d-i partman-lvm/device_remove_lvm boolean true d-i partman-md/device_remove_md boolean true d-i partman-lvm/confirm boolean true d-i partman-lvm/confirm_nooverwrite boolean true d-i partman-auto-lvm/guided_size string max d-i partman-auto/choose_recipe select 30atomic d-i partman/default_filesystem string ext4 d-i partman-partitioning/confirm_write_new_label boolean true d-i partman/choose_partition select finish d-i partman/confirm boolean true d-i partman/confirm_nooverwrite boolean true d-i partman/mount_style select uuid d-i passwd/root-login boolean false d-i passwd/make-user boolean true d-i passwd/user-fullname string vangelis d-i passwd/username string vangelis d-i passwd/user-password-crypted password $6$asdafdsdfasdfasdf d-i passwd/user-uid string d-i user-setup/allow-password-weak boolean false d-i passwd/user-default-groups string adm cdrom dialout lpadmin plugdev sambashare d-i user-setup/encrypt-home boolean false d-i apt-setup/restricted boolean true d-i apt-setup/universe boolean true d-i apt-setup/backports boolean true d-i apt-setup/services-select multiselect security d-i apt-setup/security_host string security.ubuntu.com d-i apt-setup/security_path string /ubuntu tasksel tasksel/first multiselect Basic Ubuntu server, OpenSSH server d-i pkgsel/include string build-essential htop vim nmap ntp d-i pkgsel/upgrade select safe-upgrade d-i pkgsel/update-policy select none d-i pkgsel/updatedb boolean true d-i grub-installer/only_debian boolean true d-i grub-installer/with_other_os boolean true d-i finish-install/keep-consoles boolean false d-i finish-install/reboot_in_progress note d-i cdrom-detect/eject boolean true d-i debian-installer/exit/halt boolean false d-i debian-installer/exit/poweroff boolean false

  Read the article

• Die glücklichen Gewinner der Oracle Partner Awards Germany 2012

  - by A&C Redaktion

  Es war ein Höhepunkt des Oracle Partner Days: Die Award Ceremony, auf der deutsche Oracle Partner für ihr besonderes Engagement und herausragende Erfolge bei der Spezialisierung ausgezeichnet wurden. Jeder Preisträger erhielt neben dem Award eine Urkunde sowie einen Wertscheck in Höhe von 2.000 Euro für eine Demand Generation Kampagne. Wir gratulieren allen Gewinnern ganz herzlich und stellen sie Ihnen im Folgenden kurz vor:Database Partner of the Year Germany: inforsacom Informationssysteme GmbHDass der EMEA Database Partner of the Year inforsacom auch im bundesweiten Vergleich überzeugen würde, war keine große Überraschung, ist aber ein Riesenerfolg! Übrigens war inforsacom auch schon 2011 unter den Preisträgern des OPN Day Satellite (wir berichteten). Der Platinum Partner inforsacom Informationssysteme GmbH entwickelt und liefert seit 1997 integrierte IT-Lösungen im Data-Center. Als „trusted advisor“ ist es ein Schwerpunkt von Inforsacom, in der Beratung den größtmöglichen Kundennutzen aufzuzeigen. inforsacom setzt einen deutlichen Fokus auf Oracle Datenbanktechnologien sowie das Hardware und Engineered Systems Portfolio -  inklusive der damit verbundenen Spezialisierung und Ausbildung der Mitarbeiter. Middleware Partner of the Year Germany: People at Work Systems AGZum Middleware Partner of the Year wurde die People at Work Systems AG gekürt, ein Software- und Beratungsunternehmen aus München, das  Kunden individuelle Dienstleistungen und Lösungen für Customer Relationship Management (CRM) und  Business Process Management (BPM) auf der Basis von Oracle anbietet. Seit Jahren zeigt der Oracle Partner ein hohes Commitment zu Oracle, unter anderem durch sein umfassendes Engagement im Rahmen der Solution Partner Community SOA. Die große technologische und vertriebliche Kompetenz in Sachen BPM, SOA & Integration hat die People at Work GmbH in verschiedenen komplexen Fusion Middleware-Projekten erfolgreich unter Beweis gestellt. Applications Partner of the Year Germany: ifb AGDie ifb-group deckt als einer der wenigen Partner das komplette Hyperion, Oracle EPM und BI Portfolio ab. Dabei ist das Markenzeichen der ifb die enge Verbindung von Fachexpertise und Umsetzungsstärke, denn weltweit setzen über 800 Unternehmen seit vielen Jahren erfolgreich auf Lösungen der ifb. Der Award „Applications Partner of the Year“ würdigt die Spezialisierung der ifb auf EPM. Industry Partner of the Year Germany: PORTRIX LOGISTIC SOFTWARE GmbHÜber den Preis als bester Industry Partner freute sich die PORTRIX LOGISTIC SOFTWARE GmbH aus Hamburg, eine Tochter der portrix.net GmbH. Mit einer eigenen Software-Lösung bietet der ISV Speditionen eine Lösung an, die die Abrechnung und Transparenz von Vertragskonditionen über die ganze Transportkette hinweg vereinfacht. Die Unternehmensgruppe portrix.net ist mit mehr als vier Spezialisierungen mit sehr gutem Oracle Know-how ausgestattet und somit in der Lage, zu unterschiedlichsten Anforderungen von Endkunden und Oracle Partnern exzellent zu beraten. Oracle Accelerate Partner of the Year Germany: ICP Solution GmbHICP Solution unterstützt als "One-Stop-Shop" auf dem europäischen Markt Kunden in allen Fragen rund um PLM und Agile von Oracle. Das Leistungsspektrum reicht dabei von der Prozessoptimierung und PLM Einführung, über ERP Integration bis hin zum Wartungsvertrag und speziellen Schulungen.Server & Storage Systems Partner of the Year Germany: CCF AGDie CCF AG ist schon seit 19 Jahren ein überzeugter Sun/Oracle Partner, der ca. 90% seines Umsatzes mit Sun/Oracle Produkten macht. Als flexibles regionales Unternehmen mit angeschlossener Consulting Firma, die auf Solaris und Unix spezialisiert ist, ist die CCF einer der wenigen Oracle Partner mit eigenen Solaris Administratoren. Der Award würdigt auch die herausragenden Umsatzergebnisse von CCF im Hardware Segment.Oracle on Oracle Partner of the Year Germany: anykey GmbHAuch ankey ist bereits ein langjähriger Partner von Sun/Oracle und verfügt über hohes Consulting-Know-how. 2012 ist anykey richtig durchgestartet: Viele Zertifizierungen sowie Datenbankspezialisierung wurden erworben und der Platinum Partner hat sich damit den Bereich „Oracle on Oracle“ erschlossen. Durch die erfolgreiche Platzierung bei Kunden konnte anykey im letzten Fiskaljahr sogar den Umsatz verdoppeln.

  Read the article

• Die glücklichen Gewinner der Oracle Partner Awards Germany 2012

  - by A&C Redaktion

  Es war ein Höhepunkt des Oracle Partner Days: Die Award Ceremony, auf der deutsche Oracle Partner für ihr besonderes Engagement und herausragende Erfolge bei der Spezialisierung ausgezeichnet wurden. Jeder Preisträger erhielt neben dem Award eine Urkunde sowie einen Wertscheck in Höhe von 2.000 Euro für eine Demand Generation Kampagne. Wir gratulieren allen Gewinnern ganz herzlich und stellen sie Ihnen im Folgenden kurz vor:Database Partner of the Year Germany: inforsacom Informationssysteme GmbHDass der EMEA Database Partner of the Year inforsacom auch im bundesweiten Vergleich überzeugen würde, war keine große Überraschung, ist aber ein Riesenerfolg! Übrigens war inforsacom auch schon 2011 unter den Preisträgern des OPN Day Satellite (wir berichteten). Der Platinum Partner inforsacom Informationssysteme GmbH entwickelt und liefert seit 1997 integrierte IT-Lösungen im Data-Center. Als „trusted advisor“ ist es ein Schwerpunkt von Inforsacom, in der Beratung den größtmöglichen Kundennutzen aufzuzeigen. inforsacom setzt einen deutlichen Fokus auf Oracle Datenbanktechnologien sowie das Hardware und Engineered Systems Portfolio -  inklusive der damit verbundenen Spezialisierung und Ausbildung der Mitarbeiter. Middleware Partner of the Year Germany: People at Work Systems AGZum Middleware Partner of the Year wurde die People at Work Systems AG gekürt, ein Software- und Beratungsunternehmen aus München, das  Kunden individuelle Dienstleistungen und Lösungen für Customer Relationship Management (CRM) und  Business Process Management (BPM) auf der Basis von Oracle anbietet. Seit Jahren zeigt der Oracle Partner ein hohes Commitment zu Oracle, unter anderem durch sein umfassendes Engagement im Rahmen der Solution Partner Community SOA. Die große technologische und vertriebliche Kompetenz in Sachen BPM, SOA & Integration hat die People at Work GmbH in verschiedenen komplexen Fusion Middleware-Projekten erfolgreich unter Beweis gestellt. Applications Partner of the Year Germany: ifb AGDie ifb-group deckt als einer der wenigen Partner das komplette Hyperion, Oracle EPM und BI Portfolio ab. Dabei ist das Markenzeichen der ifb die enge Verbindung von Fachexpertise und Umsetzungsstärke, denn weltweit setzen über 800 Unternehmen seit vielen Jahren erfolgreich auf Lösungen der ifb. Der Award „Applications Partner of the Year“ würdigt die Spezialisierung der ifb auf EPM. Industry Partner of the Year Germany: PORTRIX LOGISTIC SOFTWARE GmbHÜber den Preis als bester Industry Partner freute sich die PORTRIX LOGISTIC SOFTWARE GmbH aus Hamburg, eine Tochter der portrix.net GmbH. Mit einer eigenen Software-Lösung bietet der ISV Speditionen eine Lösung an, die die Abrechnung und Transparenz von Vertragskonditionen über die ganze Transportkette hinweg vereinfacht. Die Unternehmensgruppe portrix.net ist mit mehr als vier Spezialisierungen mit sehr gutem Oracle Know-how ausgestattet und somit in der Lage, zu unterschiedlichsten Anforderungen von Endkunden und Oracle Partnern exzellent zu beraten. Oracle Accelerate Partner of the Year Germany: ICP Solution GmbHICP Solution unterstützt als "One-Stop-Shop" auf dem europäischen Markt Kunden in allen Fragen rund um PLM und Agile von Oracle. Das Leistungsspektrum reicht dabei von der Prozessoptimierung und PLM Einführung, über ERP Integration bis hin zum Wartungsvertrag und speziellen Schulungen.Server & Storage Systems Partner of the Year Germany: CCF AGDie CCF AG ist schon seit 19 Jahren ein überzeugter Sun/Oracle Partner, der ca. 90% seines Umsatzes mit Sun/Oracle Produkten macht. Als flexibles regionales Unternehmen mit angeschlossener Consulting Firma, die auf Solaris und Unix spezialisiert ist, ist die CCF einer der wenigen Oracle Partner mit eigenen Solaris Administratoren. Der Award würdigt auch die herausragenden Umsatzergebnisse von CCF im Hardware Segment.Oracle on Oracle Partner of the Year Germany: anykey GmbHAuch ankey ist bereits ein langjähriger Partner von Sun/Oracle und verfügt über hohes Consulting-Know-how. 2012 ist anykey richtig durchgestartet: Viele Zertifizierungen sowie Datenbankspezialisierung wurden erworben und der Platinum Partner hat sich damit den Bereich „Oracle on Oracle“ erschlossen. Durch die erfolgreiche Platzierung bei Kunden konnte anykey im letzten Fiskaljahr sogar den Umsatz verdoppeln.

  Read the article

• Trouble compiling MonoDevelop 4 on Ubuntu 12.04

  - by Mehran

  I'm trying to compile the latest version of MonoDevelop (4.0.9) on my Ubuntu 12.04 and I'm facing errors I can not overcome. Here are my machine's configurations: OS: Ubuntu 12.04 64-bit Mono: version 3.0.12 And here are the commands that I ran to download MonoDevelop: $ git clone git://github.com/mono/monodevelop.git $ cd monodevelop $ git submodule init $ git submodule update And afterwards to compile: ./configure --prefix=`pkg-config --variable=prefix mono` --profile=stable make Then I faced the following errors (sorry if it's long): ... Building ./Main.sln xbuild /verbosity:quiet /nologo /property:CodePage=65001 ./Main.sln /property:Configuration=Debug /home/mehran/git/monodevelop/main/Main.sln: warning : Don't know how to handle GlobalSection MonoDevelopProperties.Debug, Ignoring. : warning CS1685: The predefined type `System.Runtime.CompilerServices.ExtensionAttribute' is defined in multiple assemblies. Using definition from `mscorlib' /usr/lib/mono/4.0/Microsoft.CSharp.targets: error : Compiler crashed with code: 1. : warning CS1685: The predefined type `System.Runtime.CompilerServices.ExtensionAttribute' is defined in multiple assemblies. Using definition from `mscorlib' Editor/IDocument.cs(98,30): warning CS0419: Ambiguous reference in cref attribute `GetOffset'. Assuming `ICSharpCode.NRefactory.Editor.IDocument.GetOffset(int, int)' but other overloads including `ICSharpCode.NRefactory.Editor.IDocument.GetOffset(ICSharpCode.NRefactory.TextLocation)' have also matched PatternMatching/INode.cs(51,37): warning CS1574: XML comment on `ICSharpCode.NRefactory.PatternMatching.PatternExtensions.Match(this ICSharpCode.NRefactory.PatternMatching.INode, ICSharpCode.NRefactory.PatternMatching.INode)' has cref attribute `PatternMatching.Match.Success' that could not be resolved TextLocation.cs(35,23): warning CS0419: Ambiguous reference in cref attribute `Editor.IDocument.GetOffset'. Assuming `ICSharpCode.NRefactory.Editor.IDocument.GetOffset(int, int)' but other overloads including `ICSharpCode.NRefactory.Editor.IDocument.GetOffset(ICSharpCode.NRefactory.TextLocation)' have also matched TypeSystem/FullTypeName.cs(87,24): warning CS0419: Ambiguous reference in cref attribute `ReflectionHelper.ParseReflectionName'. Assuming `ICSharpCode.NRefactory.TypeSystem.ReflectionHelper.ParseReflectionName(string)' but other overloads including `ICSharpCode.NRefactory.TypeSystem.ReflectionHelper.ParseReflectionName(string, ref int)' have also matched TypeSystem/INamedElement.cs(59,24): warning CS0419: Ambiguous reference in cref attribute `ReflectionHelper.ParseReflectionName'. Assuming `ICSharpCode.NRefactory.TypeSystem.ReflectionHelper.ParseReflectionName(string)' but other overloads including `ICSharpCode.NRefactory.TypeSystem.ReflectionHelper.ParseReflectionName(string, ref int)' have also matched TypeSystem/IType.cs(50,26): warning CS1584: XML comment on `ICSharpCode.NRefactory.TypeSystem.IType' has syntactically incorrect cref attribute `IEquatable{IType}.Equals(IType)' TypeSystem/IType.cs(319,38): warning CS1580: Invalid type for parameter `1' in XML comment cref attribute `GetMethods(Predicate{IUnresolvedMethod}, GetMemberOptions)' TypeSystem/TypeKind.cs(61,17): warning CS1580: Invalid type for parameter `1' in XML comment cref attribute `IType.GetNestedTypes(Predicate{ITypeDefinition}, GetMemberOptions)' TypeSystem/SpecialType.cs(50,52): warning CS1580: Invalid type for parameter `1' in XML comment cref attribute `IType.GetNestedTypes(Predicate{ITypeDefinition}, GetMemberOptions)' /usr/lib/mono/4.0/Microsoft.CSharp.targets: error : Compiler crashed with code: 1.

  Read the article

• Is the science of Computer Science dead?

  - by Veaviticus

  Question : Is the science and art of CS dead? By that I mean, the real requirements to think, plan and efficiently solve problems seems to be falling away from CS these days. The field seems to be lowering the entry-barrier so more people can 'program' without having to learn how to truly program. Background : I'm a recent graduate with a BS in Computer Science. I'm working a starting position at a decent sized company in the IT department. I mostly do .NET and other Microsoft technologies at my job, but before this I've done Java stuff through internships and the like. I personally am a C++ programmer for my own for-fun projects. In Depth : Through the work I've been doing, it seems to me that the intense disciplines of a real science don't exist in CS anymore. In the past, programmers had to solve problems efficiently in order for systems to be robust and quick. But now, with the prevailing technologies like .NET, Java and scripting languages, it seems like efficiency and robustness have been traded for ease of development. Most of the colleagues that I work with don't even have degrees in Computer Science. Most graduated with Electrical Engineering degrees, a few with Software Engineering, even some who came from tech schools without a 4 year program. Yet they get by just fine without having the technical background of CS, without having studied theories and algorithms, without having any regard for making an elegant solution (they just go for the easiest, cheapest solution). The company pushes us to use Microsoft technologies, which take all the real thought out of the matter and replace it with libraries and tools that can auto-build your project for you half the time. I'm not trying to hate on the languages, I understand that they serve a purpose and do it well, but when your employees don't know how a hash-table works, and use the wrong sorting methods, or run SQL commands that are horribly inefficient (but get the job done in an acceptable time), it feels like more effort is being put into developing technologies that coddle new 'programmers' rather than actually teaching people how to do things right. I am interested in making efficient and, in my opinion, beautiful programs. If there is a better way to do it, I'd rather go back and refactor it than let it slide. But in the corporate world, they push me to complete tasks quickly rather than elegantly. And that really bugs me. Is this what I'm going to be looking forward to the rest of my life? Are there still positions out there for people who love the science and art of CS rather than just the paycheck? And on the same note, here's a good read if you haven't seen it before The Perils Of Java Schools

  Read the article

• News you can use, PeopleTools gems at OpenWorld 2012

  - by PeopleTools Strategy

  Here are some of the sessions which may not have caught your eyes during your scheduling of events you would like to attend at this year's Open World! CON9183 PeopleSoft Technology Roadmap Jeff Robbins Mon, Oct 1 4:45 PM Moscone West, Room 3002/4 Jeff's session is always very well attended. Come to hear, and see, what's going to be delivered in the new release and get some thoughts on where PeopleTools and the industry is heading. CON9186 Delivering a Ground-Breaking User Interface with PeopleTools Matt Haavisto Steve Elcock Wed, Oct 3 3:30 PM Moscone West, Room 3009 This session will be wonderfully engaging for participants.  As part of our demonstration, audience members will be able to interact live and real-time with our demo using their smart phones and tablets as if you are users of the system. CON9188 A Great User Experience via PeopleSoft Applications Portal Matt Haavisto Jim Marion Pramod Agrawal Mon, Oct 1 12:15 PM Moscone West, Room 3009 This session covers not only the PeopleSoft Portal, but new features like Workcenters and Dashboards, and how they all work together to form the PeopleSoft ecosystem. CON9192 Implementing a PeopleSoft Maintenance Strategy with My Update Manager Mike Thompson Mike Krajicek Tue, Oct 2 1:15 PM Moscone West, Room 3009 The LCM development team will show Oracle's My Update Manager for PeopleSoft and how it drastically simplifies deciding what updates are required for your specific environment. CON9193 Understanding PeopleSoft Maintenance Tools & How They Fit Together Mike Krajicek Wed, Oct 3 10:15 AM Moscone West, Room 3002/4 Learn about the portfolio of maintenance tools including some of the latest enhancements such as Oracle's My Update Manager for PeopleSoft, Application Data Sets, and the PeopleSoft Test Framework, and see what they can do for you. CON9200 PeopleTools Product Team Panel Discussion Jeff Robbins Willie Suh Virad Gupta Ravi Shankar Mike Krajicek Wed, Oct 3 5:00 PM Moscone West, Room 3009 Attend this session to engage in an open discussion with key members of Oracle's PeopleTools senior management team. You will be able to ask questions, hear their thoughts, and gain their insight into the PeopleTools product direction. CON9205 Securing Your PeopleSoft Integration Infrastructure Greg Kelly Keith Collins Tue, Oct 2 10:15 AM Moscone West, Room 3011 This session, with the senior integration developer, will outline Oracle's best practices for securing your integration infrastructure so that you know your web services and REST services are as secure as the rest of your PeopleSoft environment. CON9210 Performance Tuning for the PeopleSoft Administrator Tim Bower David Kurtz Mon, Oct 1 10:45 AM Moscone West, Room 3009 Meet long time technical consultants with deep knowledge of system tuning, Tim Bower of the Center of Excellence and David Kurtz, author of "PeopleSoft for the Oracle DBA". System administrators new to tuning a PeopleSoft environment as well as seasoned experts will come away with new techniques that will help them improve the performance of their PeopleSoft system. CON9055 Advanced Management of Oracle PeopleSoft with Oracle Enterprise Manager Greg Kelly Milten Garia Greg Bouras Thurs Oct 4 12:45 PM Moscone West, Room 3009 This promises to be a really interesting session as Milten Garia from CSU discusses lessons learned during the implementation of Oracle's Enterprise Manager with the PeopleSoft plug-in across a multi campus environment. There are some surprising things about Solaris 10 and the Bourne shell. Some creative work by the Unix administrators so the well tried scripts and system replication processes were largely unaffected. CON8932 New Functional PeopleTools Capabilities for the Line of Business User Jeff Robbins Tues, Oct 2 5:00 PM Moscone West, Room 3007 Using PeopleTools 8.5x capabilities like: related content, embedded help, pivot grids, hover-over, and more, Jeff will discuss how these can deliver business value and innovation which will positively impact your business without the high costs associated with upgrading your PeopleSoft applications. Check out a more detailed list here. We look forward to meeting you all there!

  Read the article

• How To Run A Shell Script Again And Again Having X Interval Of Time?

  - by Muhammad Hassan

  I have a shell script in my Ubuntu Server 14.04 LTS at ./ShellScript.sh. I setup /etc/rc.local to run the shell script after boot but before login using below code. Run this: sudo nano /etc/rc.local then add following and save. #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. #!/bin/bash ./ShellScript.sh exit 0 Now I want to run/execute this shell script again and again having 15min of time interval between every run after boot but before login. So Can I do it? Update 1:) When I run crontab -e then I got the following. Now What to do? no crontab for root - using an empty one Select an editor. To change later, run 'select-editor'. 1. /bin/ed 2. /bin/nano <---- easiest 3. /usr/bin/vim.basic 4. /usr/bin/vim.tiny Choose 1-4 [2]: After selecting 2, I got crontab: "/usr/bin/sensible-editor" exited with status 2 UPDATE 2:) Update ShellScript.sh like below... #!/bin/bash # Testing ShellScript... while true do echo "ShellScript Start Running..." ********************************** All My Shell Script Codes/Script/Commands ********************************** echo "ShellScript End Running..." exit 0 sleep 900 done Then Run this: sudo nano /etc/rc.local then add following and save. #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. sh ./ShellScript.sh & exit 0

  Read the article

• Network is not working anymore - Ubuntu 12.04

  - by Jonathan

  Network is not working anymore - Ubuntu 12.04 Hello, I have a problem with my network connection. I have been using the same laptop with Ubuntu and the same connection for more than a year, and suddenly yesterday the connection stopped working (both wireless and wired). I've tested with another computer and the connection is fine (both wireless and wired). I've been reading similar posts but I haven't found a solution yet. I tried a few commands that I'm posting here (my system is in spanish, so I have traslated it to english, maybe the terms are not accurate): grep -i eth /var/log/syslog | tail Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): now managed Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): device state change: unmanaged - unavailable (reason 'managed') [10 20 2] Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): bringing up device. Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): preparing device. Jun 3 18:45:40 vanesa-pc kernel: [ 7351.845743] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X Jun 3 18:45:40 vanesa-pc kernel: [ 7351.845984] forcedeth 0000:00:0a.0: eth0: no link during initialization Jun 3 18:45:40 vanesa-pc kernel: [ 7351.847103] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): deactivating device (reason 'managed') [2] Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:0a.0/net/eth0 Jun 3 18:45:40 vanesa-pc kernel: [ 7351.848817] ADDRCONF(NETDEV_UP): eth0: link is not ready ifconfig -a eth0 Link encap:Ethernet addressHW 00:1b:24:fc:a8:d1 ACTIVE BROADCAST MULTICAST MTU:1500 Metric:1 Packages RX:0 errors:16 lost:0 overruns:0 frame:16 Packages TX:123 errors:0 lost:0 overruns:0 carrier:0 colissions:0 length.tailTX:1000 Bytes RX:0 (0.0 B) TX bytes:26335 (26.3 KB) Interruption:41 Base address: 0x2000 lo Link encap:Local loop Inet address:127.0.0.1 Mask:255.0.0.0 Inet6 address: ::1/128 Scope:Host ACTIVE LOOP WORKING MTU:16436 Metrics:1 Packages RX:1550 errors:0 lost:0 overruns:0 frame:0 Packages TX:1550 errors:0 lost:0 overruns:0 carrier:0 colissions:0 long.tailTX:0 Bytes RX:125312 (125.3 KB) TX bytes:125312 (125.3 KB) iwconfig lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network *-network description: Ethernet interface product: MCP67 Ethernet manufacturer: NVIDIA Corporation Physical id: a bus information: pci@0000:00:0a.0 logical name: eth0 version: a2 series: 00:1b:24:fc:a8:d1 capacity: 100Mbit/s width: 32 bits clock: 66MHz capacities: pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 latency=0 link=no maxlatency=20 mingnt=1 multicast=yes port=MII resources: irq:41 memoria:f6288000-f6288fff ioport:30f8(size=8) memoria:f6289c00-f6289cff memoria:f6289800-f628980f lsmod Module Size Used by usbhid 41906 0 hid 77367 1 usbhid rfcomm 38139 0 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 bluetooth 158438 10 rfcomm,bnep binfmt_misc 17292 1 joydev 17393 0 hp_wmi 13652 0 sparse_keymap 13658 1 hp_wmi nouveau 708198 3 ttm 65344 1 nouveau drm_kms_helper 45466 1 nouveau drm 197692 5 nouveau,ttm,drm_kms_helper i2c_algo_bit 13199 1 nouveau psmouse 87213 0 mxm_wmi 12859 1 nouveau serio_raw 13027 0 k8temp 12905 0 i2c_nforce2 12906 0 wmi 18744 2 hp_wmi,mxm_wmi video 19068 1 nouveau mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp forcedeth 58096 0 Let me know if I can give you more information. Thank you very much in advance, Jonathan

  Read the article

• New JavaScript Editor

  - by Petr

  I did not write a blog post here for a few weeks. I think the last my post was  about releasing NetBeans 7.1 in the beginning of January. The reason is not that I would change the job:), but that I have concentrated on new JavaScript support/editor. The new JavaScript editor is written basically from scratch. The answer for the question "Why from beginning again, why do you just improve the old one?" is not easy and the decision has more aspects. One of the main reasons is that the old support was written 4 years ago and the architecture is limited. Also during the time, the APIs were changed and it was very hard to keep the editor up to date. Also there is a license issue etc. In short, it is time to rewrite the old JS editor.  We build up strong community about the PHP support in NetBeans and because many PHP developers also write JavaScript code I would like to ask you for a help. There is a continual PHP build with the new JavaScript support. You can download the result of the builds here. It's a zip file. You can unzip the file anywhere, where you want. I recommend to run the build with the new userdir, to avoid damaging your current userdir. It shouldn't happened, but just to be sure:). You can achieve this through the switch --userdir. So start the unzipped file from command line from the folder, where you unzipped it, can be done with this command on unix: bin/netbeans.sh --userdir /path/to/new/userdir and on windows: bin\netbeans.exe --userdir D:\path\to\new\userdir For the developers who use continual php build already, it's well known. There is also full IDE build with the new JavaScript support for people, who need more than only PHP support.  Because the builds with the new JavaScript editor is created from a branch, there are not nightly builds available. They will be, when we merge the branch to the trunk, but so far we have to work only with the mentioned continual build. We will merge our branch after branching NetBeans 7.2 from trunk. This is also answer for the question, what release of NetBeans will contain the new JS support. It should be the release after NetBeans 7.2. I'm asking you whether you could play with the builds or better, could work in the builds with new JavaScript support and tell us every issue that you run in. It can be everything what doesn't fit you, something doesn't work as you expected, something is slow, you want change the behaviour of a feature etc. Your input / comments are very important for us and it will help us to achieve the new JavaScript support that you need.  The best way how to communicate issues is through our Bugzilla, because it is simple to track them. Sure you can write comment here:), but still I prefer Bugzilla for any issue. You can click here (you should be already log in Bugzilla), a form for the new JavaScript issue is opened, with pre-filled component Editor and NO72 keyword. I will write about the single features later, but now I will mentioned a few features that should work in better way than in the old support.  Syntactic and semantic colouring Navigator Mark Occurrences and GoTo Declaration  Code Completion Code Completion is invoked through keyboard shortcut CTRL+SPACE. The first invocation offers items that are found through a source model. Almost all editor features are based on the model, that is build from source code. There is a lot of work on the model yet, but it should offer better results. When the pop up window with code completion items is open and you press CTRL+SPACE again, then the code completion offers all elements that are in the project. In the pictures all elements that starts with letter 't'. Formatter with many options and more :) A few features are not still implemented that are supported in the old JavaScript support (for example jQuery support), but we are adding this features ASAP.

  Read the article

• Hostapd - WLAN as AP

  - by BBK

  I'm trying to start hostapd but without success. I'm using Headless Ubuntu 11.10 oneiric 3.0.0-16-server x86_64. WLAN driver is rt2800usb and my wireless nic card TP-Link TL-WN727N supports AP mode as shows below: us0# ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:27:19:be:cd:b6 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) us0# lsusb Bus 003 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter us0# lshw -C network *-network:3 description: Wireless interface physical id: 4 bus info: usb@3:2 logical name: wlan0 serial: 00:27:19:be:cd:b6 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.0.0-16-server firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn us0# hostapd /etc/hostapd/hostapd.conf Configuration file: /etc/hostapd/hostapd.conf Could not read interface wlan0 # The int flags: No such device nl80211 driver initialization failed. ELOOP: remaining socket: sock=4 eloop_data=0xd3e4a0 user_data=0xd3ecc0 handler=0x433880 ELOOP: remaining socket: sock=6 eloop_data=0xd411f0 user_data=(nil) handler=0x43cc10 us0# cat /etc/hostapd/hostapd.conf ssid=Home interface=wlan0 # The interface name of the card #driver=rt2800usb driver=nl80211 macaddr_acl=0 ieee80211n=1 channel=1 hw_mode=g auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=88888888 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP us0# iw list Wiphy phy0 Band 1: Capabilities: 0x172 HT20/HT40 Static SM Power Save RX Greenfield RX HT20 SGI RX HT40 SGI RX STBC 1-stream Max AMSDU length: 7935 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 2 usec (0x04) HT RX MCS rate indexes supported: 0-7, 32 TX unequal modulation not supported HT TX Max spatial streams: 1 HT TX MCS rate indexes supported may differ Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) (passive scanning, no IBSS) * 2472 MHz [13] (20.0 dBm) (passive scanning, no IBSS) * 2484 MHz [14] (20.0 dBm) (passive scanning, no IBSS) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * Unknown command (68) * Unknown command (55) * Unknown command (57) * Unknown command (59) * Unknown command (67) * set_wiphy_netns * Unknown command (65) * Unknown command (66) * connect * disconnect The question is: Why the hostapd not starting?

  Read the article

• SQL Server PowerShell Provider follows the Version of PowerShell on the Host and other errata

  - by BuckWoody

  There may be some misunderstanding on how the PowerShell Provider for SQL Server works. I’ve written an article or two explaining that you can use PowerShell with SQL Server, without having the SQL Server 2008 (or higher) provider around. After all, PowerShell just uses .NET, and SQL Server “Server Management Objects” or SMO listen to that interface as well. In SQL Server 2008 and higher we created a “MiniShell” for PowerShell that gives you the ability to treat a SQL Server Instance as a drive (called a “Provider” or path or drive) and a few commands (called command-lets). Using these two simple constructs you can move around SQL Server quickly and work with the objects it holds. I read the other day where someone stated that we had “re-compiled” PowerShell, so that you would have version 1.0 from SQL Server and 2.0 on your new server. Not so! Drop to a SQLPS prompt and a PowerShell prompt and type this in each: $PSVersionTable They should return the same value. You can think of a MiniShell as simply a compiled “profile” that gives you those providers and command-lets automatically – that’s all. In fact, you can load the SMO libraries yourself without the SQL Server 2008 Provider anywhere in sight. I do this all the time, since the MiniShell also has other restrictions. Also remember that if you run a PowerShell script as a SQL Agent Job step type (in 2008 and higher) that you’re running under the context of the account that starts Agent – I think most folks know this, but it’s good to keep in mind. There’s a re-written section of Books Online that goes over working with this very nicely – also covers the question “How to I connect to another server using the SQL Server PowerShell Provider” (hint: It’s just CD) and “How do I load all the SMO stuff if I don’t want to use the Provider” and more. Be sure and check out the note at the bottom that explains the firewall exceptions you’ll need to enable to CD to that remote server. Here’s that link: http://msdn.microsoft.com/en-us/library/cc281947.aspx Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Repository/Updating/Upgrading Issue

  - by Jakob

  The other day I was asked to upgrade from 13.04 to 13.10, at the time I was busy and hit no. I can not upgrade/update at this point, I get (error -11) or a 404 in terminal. In the software updater I get 'failed to download repository information.' I have tried changing my "Download From" setting to "Best" to "Main" and even a few other countries. And in "Other Software" I have tried disabling packages, but doesn't seem to help what so ever. I have tried several of the other commands to try and fix it, such as -fix missing or sudo apt-get update clean. P.S. This has also affected my thunderbird client, I cannot send/receive emails. Here is my error log when trying to upgrade: jakob@Skeletor:~$ sudo update-manager -d gpg: /tmp/tmpvejqvl/trustdb.gpg: trustdb created gpg: /tmp/tmpnayby6/trustdb.gpg: trustdb created Traceback (most recent call last): File "/usr/lib/python3/dist-packages/defer/__init__.py", line 483, in _inline_callbacks result = gen.throw(excep) File "/usr/lib/python3/dist-packages/UpdateManager/backend/InstallBackendAptdaemon.py", line 86, in commit True, close_on_done) File "/usr/lib/python3/dist-packages/defer/__init__.py", line 483, in _inline_callbacks result = gen.throw(excep) File "/usr/lib/python3/dist-packages/UpdateManager/backend/InstallBackendAptdaemon.py", line 158, in _run_in_dialog yield trans.run() aptdaemon.errors.TransactionFailed: Transaction failed: Package does not exist Package linux-headers-3.8.0-33 isn't available gpg: /tmp/tmp3kw_hl/trustdb.gpg: trustdb created. And let me throw in my sudo apt-get update too. Which this has been working variably too, but I don't know what to change my repositories to, and disabling does not effect: E: Some index files failed to download. They have been ignored, or old ones used instead. This is the short version, but looks exactly like this fairly consistently. Sometimes it downloads, sometimes it doesn't. Sometimes it tells me I have an update, and doesn't do anything. If it helps, I have recently had issues trying to install Samba as well, and connecting to the office's NAS Drive. Which works now, but I had to edit /etc/fstab/ and a few other things trying to get that to work as well. I understand it could also be a DNS problem, but this has been going on for a few days, as well as I've already tried changing my DNS server via my computer, however I am not allowed to alter the DNS on our company's router.

  Read the article

• how to start LXDE session automatically after tightvncserver starts to make me able see desktop when connecting to the host via vncclient?

  - by Oleksandr Dudchenko

  I have system which is equipped with Intel Celeron processor 1.1 GHz s370 with 384 Mb of RAM on Intel d815egew motherboard which supports wake-on-lan function. I want to use such a PC for Internet sharing to the local network. Also this PC is a DHCP+DNS server as well as router/gateway. Based on above I decided to install Lubuntu as it is lightweight system. I installed Lubuntu 10.04.4 LTS from alternate ISO. System has no auto login. System boots and has acceptable performance. Host PC has onboard 4 network adapters: eth0 – ethernet controller which is used for Local Network connections. Has static address 10.0.0.1 eth1 – ethernet controller which is not used and not configured so far, I plan to connect printer here later on. eth2 - ethernet controller which is used to connect to Internet, which we plan to share for the local network wlan0 – wireless controller, it is used in role of access poit for local Network and has address 10.0.0.2 We want to control our gateway remotely. So, we need to be able to power it on remotely. To allow this I’ve done the following things: $ cd /etc/init.d/ made a new file with command $ sudo vim wakeonlanconfig Wrote the following lines to the newly created file, saved and closed it #!/bin/bash ethtool -s eth0 wol g ethtool -s eth2 wol g exit Made the abovementioned file executable $ sudo chmod a+x wakeonlanconfig Then included it into autostart sequence during boot. $ sudo update-rc.d -f wakeonlanconfig defaults after system reboot we will be able to poweron system remotely. Than we need to have a possibility to connect remotely to the host via SSH and VNC. So, I installed following packets with the following commands: $ sudo apt-get update $ sudo apt-get install openssh-server tightvncserver Add ssh daemon into autostart sequence during boot. $ sudo update-rc.d -f ssh defaults Power off the host PC $ sudo halt Then I went to remote place, send magic paket and powered the Host up. System started... And I connected to the host via Putty from remote system under Windows. Than logged in and run the command to start vnc server. $ tightvncserver -geometry 800x600 -depth 16 :2 VNC server successfully started and I got message like follows. New 'X' desktop is gateway:2 Starting applications specified in /home/dolv/.vnc/xstartup Log file is /home/dolv/.vnc/gateway:2.log Using UltraVNC Viewer programm under windows I connected to the host's vnc server, enterd the password and.... sow only mouse cursor in form of cross on a grey background of 800x600 dots, no desktop. Here is my .vnc/xstartup file #!/bin/sh xrdb $HOME/.Xresources xsetroot -solid grey #x-terminal-emulator -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" & #x-window-manager & # Fix to make GNOME work export XKL_XMODMAP_DISABLE=1 /etc/X11/Xsession The Question: What I have to change and where to make LXDE session start automatically after tightvncserver starts?

  Read the article

• Commandline Purge in AS11

  - by Dheeraj Kumar

  AS11 - B2B offering consists of numerous features that have been made available via commandline approach. Most of these are supplement to the already available User Interface based approach. One such is purging of runtime data. The commandline purge option enables the users to purge the runtime data, based on various criteria. This is an ANT based command, provides the flexibility to selectively set the criteria to purge the runtime data. Providing the command line option also enables the administrator to purge in bulk, without visiting the B2B UI, which can also be used for automation purpose By default archival is turned on for purge activity. As a pre-requisite, the respective folder needs to be configured in database with the proper permission. When no filename is provided for archived data, the sysdate will be considered for filename. Below are the various options to purge the runtime data Normal 0 Option ANT option   Message state -Dmsgstate   Date range -Dfromdate,  -Dtodate Format : dd/mm/yyyy hh:mm AM/PM Trading partner -Dtp   Direction -Ddirection   Message Type -Dmsgtype   Agreement Name -Dagreement   IdType/ value -Didtype,  -Didvalue   Archive -Darchive True/false By default true Archive file name -Darchivename File name (optional), will be used when archive is set to true. Normal 0 Note: When using -Darchivename the value must be a unique file name. An existing file name used with -Darchivename throws an exception v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 Below are the few of ant commands and various options.   Purge based on date range and message state: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dfromdate="19/12/2009 1:04 AM" -Dtodate="19/12/2009 1:05 AM" -Dmsgstate=MSG_COMPLETE -Darchivename="filename.dmp"  Purge based on direction: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Ddirection="OUTBOUND" Normal 0 Purge based on agreement Name: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dagreement="agreement_name" Normal 0 Purge based on Trading partner Name: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dtp=GlobalChips Normal 0 Purge based on Message State: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dmsgstate="MSG_COMPLETE" Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Ddirection="OUTBOUND" -Dmsgstate="MSG_COMPLETE"

  Read the article

• MySQL Enterprise Backup 3.8.2 - Overview

  - by Priya Jayakumar

    MySQL Enterprise Backup (MEB) is the ideal solution for backing up MySQL databases. MEB 3.8.2 is released in June 2013. MySQL Enterprise Backup 3.8.2 release’s main goal is to improve usability. With this release, users can know the progress of backup completed both in terms of size and as a percentage of the total. This release also offers options to be able to manage the behavior of MEB in case the space on the secondary storage is completely exhausted during backup. The progress indicator is a (short) string that indicates how far the execution of a time-consuming MEB command has progressed. It consists of one or more "meters" that measures the progress of the command. There are two options introduced to control the progress reporting function of mysqlbackup command (1) –show-progress (2) –progress-interval. The user can control the progress indicator by using “--show-progress” option in any of the MEB operations. This option instructs MEB to output periodically short reports on the progress of time-consuming commands. The argument of this option instructs where the output could be sent. For example it could be stderr, stdout, file, fifo and table. With the “--show-progress” option both the total size of the backup to be copied and the size that’s already copied will be shown. Along with this, the state of the operation for example data or meta-data being copied or tables being locked and other such operations will also be reported. This gives more clear information to the DBA on the progress of the backup that’s happening. Interval between progress report in seconds is controlled by “--progress-interval” option. For more information on this please refer progress-report-options. MEB can also be accessed through GUI from MySQL WorkBench’s next version. This can be used as the front end interface for MEB users to perform backup operations at the click of a button. This feature was highly requested by DBAs and will be very useful. Refer http://insidemysql.com/mysql-workbench-6-0-a-sneak-preview/ for WorkBench upcoming release info. Along with the progress report feature some of the important issues like below are also addressed in MEB 3.8.2. In MEB 3.8.2 a new command line option “--on-disk-full” is introduced to abort or warn the user when a backup process encounters a full disk condition. When no option is given, by default it would abort. A few issues related to “incremental-backup” are also addressed in this release. Please refer 3.8.2 documentation for more details. It would be good for MEB users to move to 3.8.2 to take incremental backups. Overall the added usability and the important defects fixed in this release makes MySQL Enterprise Backup 3.8.2 a promising release.  

  Read the article

• ArchBeat Link-o-Rama Top 10 - September 16-22, 2012

  - by Bob Rhubart

  The Top 10 most popular items shared on the OTN ArchBeat Facebook Page for the week of September 16-22, 2012. The Real Architects of LA: OTN Architect Day in Los Angeles - Oct 25No gossip. No drama. No hair pulling. Just a full day of technical sessions and peer interaction focused on using Oracle technologies in today's cloud and SOA architectures. The event is free, but seating is limited, so register now. Thursday October 25, 2012. 8:00 a.m. – 5:00 p.m. Sofitel Los Angeles, 8555 Beverly Boulevard, Los Angeles, CA 90048. OIM-OAM-OAAM integration using TAP – Request Flow you must understand!! | Atul KumarAtul Kumar's post addresses "key points and request flow that you must understand" when integrating three Oracle Identity Management product Oracle Identity Management, Oracle Access Management, and Oracle Adaptive Access Manager. Cloud, automation drive new growth in SOA governance market | ZDNet "SOA governance tools and processes learned over the past decade are now underpinning cloud projects as they scale across enterprises," reports Joe McKendrick. But there remains a lack of understanding about SOA Governance. DevOps Basics: Track Down High CPU Thread with ps, top and the new JDK7 jcmd Tool | Frank Munz "The approach is very generic and works for WebLogic, Glassfish or any other Java application," say Frank Munz. "UNIX commands in the example are run on CentOS, so they will work without changes for Oracle Enterprise Linux or RedHat. Creating the thread dump at the end of the video is done with the jcmd tool from JDK7." Frank has captured the process in the posted video. Oracle OpenWorld 2012 Hands-on Lab: "Leading Your Everyday Application Integration Projects with Enterprise SOA" Yet another session to squeeze into your already-jammed Oracle OpenWorld schedule. This hands-on lab focuses on how "Oracle Enterprise Repository, Oracle Application Integration Architecture (AIA) Foundation Pack, and Oracle SOA Suite work together to help you drive your enterprisewide integration projects." Loving VirtualBox 4.2… | The ORACLE-BASE Blog Is it wrong for a man to love a technology? Oracle ACE Director Tim Hall has several very good reasons for his feelings… ADF Create and CreateInsert Operations for ADF Table | Andrejus Baranovskis Oracle ACE Director Andrejus Baranovskis answers the question, "What operation is best to use to insert a new row into an ADF table, Create or CreateInsert?" Fault Handling Slides and Q&A | Ronald van Luttikhuizen Oracle ACE Director Ronald van Luttikhuizen shares the slides and a Q&A transcript from a presentation he and fellow ACE Director Guido Schmutz gave at the recent Oracle OpenWorld and JavaOne preview event organized by AMIS Technology. Why IT is a profession in 'flux' | ZDNet I usuallly don't post two items from the same person in one day, but this post from ZDNet blogger Joe McKendrick deals with some critical issues affecting those in IT. As McKendrick puts it: "IT professionals are under considerable pressure to deliver more value to the business, versus being good at coding and testing and deploying and integrating." Running RichFaces on WebLogic 12c | Markus Eisele "With all the JMS magic and the different provider checks in the showcase this has become some kind of a challenge to simply build and deploy it," says Oracle ACE Director Markus Eisele. His detailed post will help you to meet that challenge. Thought for the Day "Less is more." — Ludwig Mies van der Rohe (March 27, 1886 – August 17, 1969) Source: BrainyQuote.com

  Read the article

• Access forbidden 403 error in xampp

  - by Ramvignesh

  I am very new to xampp. I have made a fresh xampp install with the following commands. sudo su cd /tmp wget bit.ly/1cmyrUo -O xampp-32bit.run chmod 777 ./xampp-32bit.run sudo ./xampp-32bit.run Then I made a perl file to check whether my xampp works. The following is my sample.pl file content. #!usr/bin/perl print "content-type:text/html\n"; print(header()); use CGI qw(:standard); print(start_html()); print "Hello. I am ram"; print(end_html()); After copying my perl file from /home/vicky/desktop to /opt/lampp/cgi-bin. I started my xampp with the following command. /opt/lampp/lampp start Then I ran my sample.pl in the localhost with the help of the http://localhost/cgi-bin/sample.pl in my mozilla browser. I just got the following window. I found only answers relating to the 'new security concept error' and 'accessing virtual host issue'. I did came across an askubuntu query, a bid similar to that of mine. It had no answers but some comments. One comment suggested to change the file permissions. It directed to get help from here. It said to change the directory permission as 755 and file permission as 644 to resolve this kind of issue. When I tried to do that, I came to know that my cgi-bin directory already had 755 permission and my sample.pl had 644 permission. I have no solutions now. PostScript: I have attached the content of my /opt/lampp/apache2/conf/httpd.conf file. Hope this will help the answer-providers to understand my problem completely. Alias /bitnami/ "/opt/lampp/apache2/htdocs/" Alias /bitnami "/opt/lampp/apache2/htdocs" <Directory "/opt/lampp/apache2/htdocs"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory>

  Read the article

< Previous Page | 472 473 474 475 476 477 478 479 480 481 482 483  | Next Page >