Search Results

Search found 17984 results on 720 pages for 'log shipping'.

Page 476/720 | < Previous Page | 472 473 474 475 476 477 478 479 480 481 482 483  | Next Page >

• Keyboard and mouse/touchpad wont work in 11.10

  - by Maynard

  I installed Ubuntu 11.10 onto my Fujitsu Lifebook N5010 Laptop yesterday and all seemed good up until this morning. My key board and mouse/touchpad no longer work. I can, however, plug in a usb mouse and that works so I am able to shut the laptop off. With the usb mouse plugged in I still can't use the keyboard so the only thing the mouse is good for is shutting the system down. When I first boot the system the mouse/touchpad and keyboard will work long enough so that I can log in my password but then after about 20 seconds or so the mouse/touchpad and keyboard stop working. I have searched the internet for answers and haven't found anything that is working for me. Someone suggested I type a particular command into the terminal but not real sure how I do that without a keyboard. And going out to buy a usb keyboard (assuming that would work) and usb mouse still doesn't fix the problem. Anybody have any suggestions I would REALLY appreciate it. I love Ubuntu but this is just not good.

  Read the article

• Exceptions from automongobackup, yet script completes

  - by chakram88

  I am using automongobackup to, well, automate the backups of mongodb. output from the script (to STDERR) has the following exceptions (but the backup completes, and the dump files are created) ###### WARNING ###### STDERR written to during mongodump execution. The backup probably succeeded, as mongodump sometimes writes to STDERR, but you may wish to scan the error log below: exception: connect failed exception: connect failed exception: connect failed exception: connect failed exception: HostAndPort: bad port # exception: connect failed exception: connect failed exception: connect failed exception: connect failed exception: connect failed exception: connect failed I know that the Host & Port are correct. If I run mongodump --host=127.0.0.1:27017 --journal (which is the effective command from automongobackup based on the options set and my reading of the src code) everything runs clean without any error reporting and the dump files are created as expected. Why would automongobackup report connection errors, even tho it does create the dump files, yet a straight call to mongodump does not? Debian 6.0 Lenny (from Linode image: Latest 3.2 (3.2.1-x86_64-linode23)) AutoMongoBackup VER 0.9 mongodb v 2.0.2

  Read the article

• how do I fix 12.04 which has crashed after the latest update

  - by user70261

  I added a new drive to my system because the old one was full and stopped. I installed 12.04 at the same time, onto the new drive using a flash disk while off line. The system performs fine on 12.04 from the flash disk and it booted from the new drive OK and I was able to recover all my old data. The updater suggested that I update, so I went ahead and did so. At the end of which it wanted to reboot. I went ahead but on reboot I get to the log in prompt and then the whole system crashes. It tries to recover and then performs a bug report during which it tells me that a whole bunch of files are out of date (these would be the new ones I just updated!) and the screen goes black. Game over. I've tried to reboot several times ... same result. I can boot off the flash drive OK. How do I restore the system I had before the update, without over writing all my hard earned recovered data? Or how do I identify the "new updates" that are causing me grief?

  Read the article

• Someone tried to hack my Node.js server, need to understand a GET request in the logs

  - by Akay

  Alright, so I left my Node.js server alone for a while and came back to find some really interesting stuff in the logs. Apparently some moron from China or Poland tried to hack my server using directory traversal and what not, while it seems though he did not succeed I am unable understand few entries in the log. This is the output of a "hohup.out" file. The attack starts, apparently he is trying to find out some console entry in my server. All of which fail and return a 404. [90mGET /../../../../../../../../../../../ [31m500 [90m6ms - 2b[0m [90mGET /<script>alert(53416)</script> [33m404 [90m7ms[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET / [32m200 [90m1ms - 240b[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET /pz3yvy3lyzgja41w2sp [33m404 [90m1ms[0m [90mGET /stylesheets/style.css [33m404 [90m0ms[0m [90mGET /index.html [33m404 [90m1ms[0m [90mGET /index.htm [33m404 [90m0ms[0m [90mGET /default.html [33m404 [90m0ms[0m [90mGET /default.htm [33m404 [90m1ms[0m [90mGET /default.asp [33m404 [90m1ms[0m [90mGET /index.php [33m404 [90m0ms[0m [90mGET /default.php [33m404 [90m1ms[0m [90mGET /index.asp [33m404 [90m0ms[0m [90mGET /index.cgi [33m404 [90m0ms[0m [90mGET /index.jsp [33m404 [90m1ms[0m [90mGET /index.php3 [33m404 [90m0ms[0m [90mGET /index.pl [33m404 [90m0ms[0m [90mGET /default.jsp [33m404 [90m0ms[0m [90mGET /default.php3 [33m404 [90m0ms[0m [90mGET /index.html.en [33m404 [90m0ms[0m [90mGET /web.gif [33m404 [90m34ms[0m [90mGET /header.html [33m404 [90m1ms[0m [90mGET /homepage.nsf [33m404 [90m1ms[0m [90mGET /homepage.htm [33m404 [90m1ms[0m [90mGET /homepage.asp [33m404 [90m1ms[0m [90mGET /home.htm [33m404 [90m0ms[0m [90mGET /home.html [33m404 [90m1ms[0m [90mGET /home.asp [33m404 [90m1ms[0m [90mGET /login.asp [33m404 [90m0ms[0m [90mGET /login.html [33m404 [90m0ms[0m [90mGET /login.htm [33m404 [90m1ms[0m [90mGET /login.php [33m404 [90m0ms[0m [90mGET /index.cfm [33m404 [90m0ms[0m [90mGET /main.php [33m404 [90m1ms[0m [90mGET /main.asp [33m404 [90m1ms[0m [90mGET /main.htm [33m404 [90m1ms[0m [90mGET /main.html [33m404 [90m2ms[0m [90mGET /Welcome.html [33m404 [90m1ms[0m [90mGET /welcome.htm [33m404 [90m1ms[0m [90mGET /start.htm [33m404 [90m1ms[0m [90mGET /fleur.png [33m404 [90m0ms[0m [90mGET /level/99/ [33m404 [90m1ms[0m [90mGET /chl.css [33m404 [90m0ms[0m [90mGET /images/ [33m404 [90m0ms[0m [90mGET /robots.txt [33m404 [90m2ms[0m [90mGET /hb1/presign.asp [33m404 [90m1ms[0m [90mGET /NFuse/ASP/login.htm [33m404 [90m0ms[0m [90mGET /CCMAdmin/main.asp [33m404 [90m1ms[0m [90mGET /TiVoConnect?Command=QueryServer [33m404 [90m1ms[0m [90mGET /admin/images/rn_logo.gif [33m404 [90m1ms[0m [90mGET /vncviewer.jar [33m404 [90m1ms[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET / [32m200 [90m7ms - 240b[0m [90mOPTIONS / [32m200 [90m1ms - 3b[0m [90mTRACE / [33m404 [90m0ms[0m [90mPROPFIND / [33m404 [90m0ms[0m [90mGET /\./ [33m404 [90m1ms[0m But here is when things start getting fishy. [90mGET http://www.google.com/ [32m200 [90m2ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET / [32m200 [90m1ms - 240b[0m [90mGET /robots.txt [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m0ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m3ms[0m [90mGET /manager/html [33m404 [90m0ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m0ms[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET http://37.28.156.211/sprawdza.php [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m2ms - 240b[0m [90mHEAD / [32m200 [90m1ms - 240b[0m [90mGET http://www.daydaydata.com/proxy.txt [33m404 [90m19ms[0m [90mHEAD / [32m200 [90m1ms - 240b[0m [90mGET /manager/html [33m404 [90m2ms[0m [90mGET / [32m200 [90m4ms - 240b[0m [90mGET http://www.google.pl/search?q=wp.pl [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m0ms[0m [90mHEAD / [32m200 [90m2ms - 240b[0m [90mGET http://www.google.pl/search?q=onet.pl [33m404 [90m1ms[0m [90mHEAD / [32m200 [90m2ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET http://www.google.pl/search?q=ostro%C5%82%C4%99ka [33m404 [90m1ms[0m [90mGET http://www.google.pl/search?q=google [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m2ms - 240b[0m [90mHEAD / [32m200 [90m2ms - 240b[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m0ms[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET http://www.baidu.com/ [32m200 [90m2ms - 240b[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mPOST /api/login [32m200 [90m1ms - 28b[0m [90mGET /web-console/ServerInfo.jsp [33m404 [90m2ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m10ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://proxyjudge.info [32m200 [90m2ms - 240b[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET / [32m200 [90m1ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m3ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m3ms - 240b[0m [90mGET http://www.baidu.com/ [32m200 [90m1ms - 240b[0m [90mGET /manager/html [33m404 [90m0ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m2ms - 240b[0m [90mHEAD / [32m200 [90m1ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET http://www.google.com/search?tbo=d&source=hp&num=1&btnG=Search&q=niceman [33m404 [90m2ms[0m So my questions are, how come my server is returning a "200" OK for root level domains? How did the hacker even manage to send a GET request to my server such that "http://www.google.com" shows up in the log while my server is simply an API that works on relative URLs such as "/api/login". And, while I looked up the OPTIONS, TRACE and PROPFIND HTTP requests that my server has logged it would be great if someone could explain what exactly was the hacker trying to achieve by using these verbs? Also what in the world does "[90m [32m [90m1ms - 240b[0m" mean? The "ms" makes sense, probably milliseconds for the request, rest I am unable to understand. Thank you!

  Read the article

• How to know if a file has 'access' monitor in linux

  - by J L

  I'm a noob and have some questions about viewing who accessed a file. I found there are ways to see if a file was accessed (not modified/changed) through audit subsystem and inotify. However, from what I have read online, according to here: http://www.cyberciti.biz/tips/linux-audit-files-to-see-who-made-changes-to-a-file.html it says to 'watch/monitor' file, I have to set a watch by using command like: # auditctl -w /etc/passwd -p war -k password-file So if I create a new file or directory, do I have to use audit/inotify command to 'set' watch first to 'watch' who accessed the new file? Also is there a way to know if a directory is being 'watched' through audit subsystem or inotify? How/where can I check the log of a file?

  Read the article

• Windows Internet Connection Issue (HELP)

  - by semajjames1399

  I have a windows 8 hp dual booting ubuntu. When i log onto windows i cant get on the internet... But skype and other applications can just now webpages in a browser what so ever (this is on windows 8). But on ubuntu i have no internet issues at all. From what i see right now its only the browsers in windows 8 that cant get the internet, and ive tried all the browsers i had (chrome, ie, firefox) and they cant connect but in the win8 notification area it says im connected. I can even ping via cmd. HELP! Thanks. Whats not working is that i cant get access the internet through the windows 8 broswer.

  Read the article

• Get name (address) of computer from which from which SSH login was made.

  - by amicitas

  After logging onto a linux machine via SSH, I would like to be able to retrieve the name of the computer from which the connection was made. Ideally I am looking for some command like hostname or uname but that would retrieve the name of the client instead of the host. This information must be accessible somewhere, since when I log on I get a message that contains the clinent name from the last login: Last login: Thu Mar 11 18:42:01 2010 from my.address.com The reason for wanting to do this is to be able to take different action in my .login file depending on which computer I am using for connection is from.

  Read the article

• Acer Aspire 5532 crashes with no warning

  - by keenan

  I have an Acer Aspire 5532. I don't have more specs off the top of my head but from what I've looked up it has all the factory stock stuff in. My keyboard is completely shot and doesn't work at all. It was working fine for quite a while, however I go to get on it Thanksgiving night and all of a sudden it just crashes with no warning. I try to restart it and it beeps 3 times with about 15 seconds in between each beep. After that it will go to start up and get to the log in screen, and about 3 minutes later it will crash again with absolutely no warning. The same thing happens every time I try to start it up. I've taken it completely apart and cleaned the fan and all the airways. I made sure all the connections are good (or at least all the ones that I can get to above the mother board), put it back together and I get the same problem.

  Read the article

• Firewall blocks outgoing email

  - by Martin Trigaux

  On my Debian server running a Django website, I have an error when I need to send an email. The error received is Exception Type: gaierror Exception Value: [Errno -2] Name or service not known Exception Location: /usr/lib/python2.6/socket.py in create_connection, line 547 You can see the full error log here. After testing, it seems it is my firewall that blocks the request. You can see my iptable file (/etc/init.d/firewall). I think the problem comes from the two commented lines that were supposed to accepts all established connections. When I uncomment them, I have an error iptables: No chain/target/match by that name. Thank you

  Read the article

• Deployed Web Application Requests for User Name and Password

  - by user43175

  Deployed Web Application Requests for User Name and Password I recently deployed a .NET web application into the server. Authentication mode is set to Windows (since the application is accessible only to Intranet users. Testing some machines, the application loads up properly. For some machines, a logon dialog window appears asking for User Name or Password. These dialog windows are those that you also normally see when you are trying to log into a Windows domain. Any idea why this happens randomly? Thanks.

  Read the article

• MySQL Replication fix after server shutdown/start

  - by Jagbir

  Server1 is Master Server2 is Slave Both are in our AWS testing env and we stop them once done with our work. When start again, Master rotates/creates new binary log file but slave keep looking for same/existing one and replication stops. Right now, I'm manually repairing it by (slave): stop slave; CHANGE MASTER TO MASTER_HOST='xx', MASTER_USER='xxx', MASTER_PASSWORD='xxx' , MASTER_LOG_FILE='new-mysql-bin.00000x',MASTER_LOG_POS=107; start slave; show slave status\G and slave becomes good again.Mysql is 5.5.x on Ubuntu 12.04. Will appreciate any help in automating it.

  Read the article

• vmconvert exchange 2007

  - by user72950

  Has anyone tried to run vmconvert on a Windows 2008 64 bit server running Exchange 2007? Here is what I did. I stopped the Exchange processes and IIS and ran vmconvert. When I moved the new server to my vmware server 2.0 for windows and booted it. All seemed well except I could not send or receive email. All outbound was stuck in the queues. I was able to log in via OWA so that tells the network setup/NIC bindings were OK. Any ideas?

  Read the article

• Moving cpanel backup of magento site to VPS

  - by user2564024

  I was having my site in shared hosting, I took the entire backup, its structure is like addons homedir mysql resellerpackages suspendinfo bandwidth homedir_paths mysql.sql sds userconfig counters httpfiles mysql-timestamps sds2 userdata cp locale nobodyfiles shadow va cron logaholic pds shell vad digestshadow logs proftpdpasswd ssl version dnszones meta psql sslcerts vf domainkeys mm quota ssldomain fp mma resellerconfig sslkeys has_sslstorage mms resellerfeatures suspended Now I have subscribed to vps, I have copied the files inside homedir/public_html to var/www/html of my new hosting, but am seeing the following error when I view it browser, There has been an error processing your request Exception printing is disabled by default for security reasons. Error log record number: 259343920016 I have just created database with name magenhto inside mysql. Previously I had cpanel and used one click installer. Hence am not aware of how to use that data inside mysql to this new system and are there any more changes.

  Read the article

• Hyper-v dynamic memory client machines always use maximum memory

  - by Eric P

  When I create a virtual machine in Hyper-V and set it up to use dynamic memory, the virtual machine will always use the maximum memory within the virtualized OS. Hyper-V will show the assigned memory at 514mb, but when I log into the server and pull up task manager, it will show 90% memory used. When I bump the maximum memory up to 4gb, I get the same result: 90% memory usage. Nothing is even running on the virtual machine other than a clean instal of Windows Server 2008 R2. I have also tried it with Windows 7 with the same results. Is this the expected behavior or is something setup wrong

  Read the article

• VPN stuck on Verifying Username and Password

  - by user2791

  I'm building a new machine and everything is working correctly, except that I can't log on to my VPN. It hangs at the "Verifying username and password..." step, then returns after about 30 seconds claiming Error 721. I have another machine sitting next to this one with the VPN connection configured exactly the same, connecting just fine over the same wifi network, so I'm convinced that there is no server or firewall problem. The VPN works fine. This machine simply can't connect to it given the correct credentials and configuration. Any suggestions?

  Read the article

• Sudo asks for password twice with LDAP authentication

  - by Gnudiff

  I have Ubuntu 8.04 LTS machine and Windows 2003 AD domain. I have succesfully set up that I can log in with domain username and password, using domain prefix, like "domain+username". Upon login to machine it all works first try, however, for some reason when I try to sudo my logged in user, it asks for the password twice every time when I try sudo. It accepts the password after 2nd time, but not the first time. Once or twice I might think I just keep entering wrong pass the first time, but this is what happens always, any ideas of what's wrong? pam.conf is empty pam.d/sudo only includes common-auth & common-account, and common-auth is: auth sufficient pam_unix.so nullok_secure auth sufficient pam_winbind.so auth requisite pam_deny.so auth required pam_permit.so

  Read the article

• Windows 8 Remote Desktop only allows one user at a time?

  - by segmentation fault

  I tried connecting to Windows 8 using its built-in Remote Desktop feature, but for some inexplicable reason, it requires that no users are logged in on the target machine before a remote user can log in. This has never been a problem with rdesktop on Unixen; I could rdesktop from as many machines as I wanted and any logged-in users would never notice a thing. What's the problem with Windows? Any way to allow concurrent local and remote logins to a Windows 8 machine without hacks or cracks? The "guides" on how to do this that show up in the Google results all suggest replacing a system DLL with a hacked one, but that's not acceptable.

  Read the article

• /etc/environment and cron

  - by clorz

  I've got two machines: Fedora and CentOS. And a cronjob 0-59 * * * * env > /home/me/env.log On CentOS I can see that /etc/environment is affecting the output while on Fedora it does not. I want Fedora to be like CentOS. What do I need to make it happen? /etc/pam.d/crond on Fedora auth sufficient pam_rootok.so auth required pam_env.so auth include system-auth account required pam_access.so account include system-auth session required pam_loginuid.so session include system-auth /etc/pam.d/crond on CentOS auth sufficient pam_env.so auth required pam_rootok.so auth include system-auth account required pam_access.so account include system-auth session required pam_loginuid.so session include system-auth /etc/security/pam_env.conf is the same on both systems and consists of commented out lines. Even if I make /etc/pam.d/cron.d files the same, problem still persists.

  Read the article

• Xmodmap: six characters to one key and two layouts?

  - by sup

  I know how to have six symbols on one key thanks to this question: Xmodmap: Six characters to one key? However, when I have two layouts and switch them, weird things happen. I have the following (well, different, but this is easier to talk about) line in my xmodmap: keycode 31 = a A b B c C When I log in, everything works as you would expect. Pressing key 31 give a, with Shift A, with AltGr c and C respectively and with ISO_Level3_Shift. However, when I change the layout, key 31 gives me b and B with shift and c and C with AltGr. This is on Ubuntu 11.10 under Ubuntu. Does anybody undestand what is happening? Could I restrict xmodmap to just one layout?

  Read the article

• E2K7: Can't add jounaling mailbox to storage group

  - by Agent

  We just added a new SG to a standalone E2K7 server but Exchange pops an error when we try to enable journaling on it. The journal recipient mailbox was created a while back and as far as we can tell there are no issues with it. It's viewable in the GAL and accessible through OWA. The error is: Set-Mailboxdatabase Error:Obkect "domain.company.com/Journaling/Journal5" could not be found. Please make sure that it was spelled correctly or specify a different object. This Journal5 account is in a child domain (like all the other journaling mailboxes we have attached to other mailbox server SGs). We also tried attaching one of the working journaling mailboxes to this SG but they also popped back the same error. Event log is now showing any errors at all. We are running SP1 on this server. I've tried dismounting/remounting the store and bouncing the IS and SA services but that didn't help any. Any suggestions?

  Read the article

• Out of nowhere, ssh_exchange_identification: Connection closed by remote host

  - by disusered

  I am running Ubuntu 10.10 on a remote box. I ssh to it everyday without issues but today out of the blue, I get the following error: ssh_exchange_identification: Connection closed by remote host If I connect with -vv, I get the following: OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /Users/bla/.ssh/config debug1: Applying options for ubuntu-server debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ubuntu-server.com [123.123.123.123] port 22. debug1: Connection established. debug2: key_type_from_name: unknown key type '-----BEGIN' debug2: key_type_from_name: unknown key type '-----END' debug1: identity file /Users/bla/.ssh/id_rsa type -1 debug1: identity file /Users/bla/.ssh/id_rsa-cert type -1 ssh_exchange_identification: Connection closed by remote host If I remove the key, I get the exact same output (sans "debug2: key_type_...). I've managed to log in physically and checked my hosts.allow and hosts.deny but they have no entries. I tried removing and reinstalling OpenSSH, checked authorized_keys and ~/.ssh permissions and tried connecting from other computers only to get the same error. I'm at my wits end, any help would be greatly appreciated.

  Read the article

• Getting a Non-Genuine windows message on a Genuin Windows 7

  - by user36257

  I have a Genuin Win7 enterprise on my Laptop. A few hours ago when I wanted to log into windows it did not accept my Password. I used the safe mode and it accepted the password I was using before this new password. It is the laptop for work and we have a changing password policy for every three months, so the pasword that I could use in SAFE MODE was the password I had for the last previous threee months. ... after that I used SYSTEM RESTORE and it reveretd it back to Yesterday ... so this time I could loging successfully with my current password. BUT It shows me a message that I am a victim of software counterfeiting and when I restarted the windows again and logged into windows, this time it is just a black desktop. weird...any ideas?

  Read the article

• Managing Windows 7 Workstations

  - by ethamoose

  There was a similar thread to this a few years back, but without any solutions. Just wondering if things have moved on since then. I'm primarily an Mac admin working in a college, but I have recently taken over responsibility for about 30 student workstations running Windows 7. For the Macs I have Apple Remote Desktop, where I can logon to machines in a session,check for any nefarious student activity and if necessary, log off or lock users out of machines. Could anyone give me a suggestion for an equivalent Windows system manager where I can do these tasks - e.g. not just a vnc client but one with more management options?

  Read the article

• Ubuntu 13.10 has no Suspend or Hibernate Options

  - by Charlie Davies

  I have a Lenova Yoga 2 Pro, and I have Ubuntu 13.10 installed. I am having some issues setting the power functions. At the moment I can not suspend or hibernate the laptop. So from Gnome 3.10 I have the option to Log Out, Shutdown & Restart. No option for Suspend / Hibernate. Weirdly however I can use these commands to get the right behaviour sudo pm-suspend sudo pm-hibernate So the laptop knows how to do this, it just is not giving me the option and also when I set "Close screen lid" to suspend, well nothing happens. It feels like there is a "connection" not being made.

  Read the article

• wmp12 refuses to convert files when syncing

  - by Carbonara

  I have quite a large music collection of MP3s at 320kbps and some WMA files at various bitrates. I'm trying to sync some of them to my HTC Desire and am quickly running out of space. WMP12 has options to set, per device you wish to sync, to auto convert to a lower bitrate whilst syncing. I have set this to auto convert files to a maximum bitrate of 192kbps, that way I can fit more music on the device but keep the files on my PC at the higher rate. See these screens to see that it's set up correctly. Only problem is, surprise surprise for a Microsoft product, it doesn't actually work. Any file that is greater than 192kbps, MP3 or WMA simply fails, doesn't get converted or copied to the device. The message in the sync log displays the rather unhelpful message "error" and that's it. Any help would be appreciated. I'm not really looking for alternative software solutions I'd like to get this working since that's what it's supposed to do.

  Read the article

< Previous Page | 472 473 474 475 476 477 478 479 480 481 482 483  | Next Page >