Search Results

Search found 39614 results on 1585 pages for 'value chain planning'.

Page 476/1585 | < Previous Page | 472 473 474 475 476 477 478 479 480 481 482 483  | Next Page >

  • Subterranean IL: Volatile

    - by Simon Cooper
    This time, we'll be having a look at the volatile. prefix instruction, and one of the differences between volatile in IL and C#. The volatile. prefix volatile is a tricky one, as there's varying levels of documentation on it. From what I can see, it has two effects: It prevents caching of the load or store value; rather than reading or writing to a cached version of the memory location (say, the processor register or cache), it forces the value to be loaded or stored at the 'actual' memory location, so it is then immediately visible to other threads. It forces a memory barrier at the prefixed instruction. This ensures instructions don't get re-ordered around the volatile instruction. This is slightly more complicated than it first seems, and only seems to matter on certain architectures. For more details, Joe Duffy has a blog post going into the details. For this post, I'll be concentrating on the first aspect of volatile. Caching field accesses To demonstrate this, I created a simple multithreaded IL program. It boils down to the following code: .class public Holder { .field public static class Holder holder .field public bool stop .method public static specialname void .cctor() { newobj instance void Holder::.ctor() stsfld class Holder Holder::holder ret }}.method private static void Main() { .entrypoint // Thread t = new Thread(new ThreadStart(DoWork)) // t.Start() // Thread.Sleep(2000) // Console.WriteLine("Stopping thread...") ldsfld class Holder Holder::holder ldc.i4.1 stfld bool Holder::stop call instance void [mscorlib]System.Threading.Thread::Join() ret}.method private static void DoWork() { ldsfld class Holder Holder::holder // while (!Holder.holder.stop) {} DoWork: dup ldfld bool Holder::stop brfalse DoWork pop ret} If you compile and run this code, you'll find that the call to Thread.Join() never returns - the DoWork spinlock is reading a cached version of Holder.stop, which is never being updated with the new value set by the Main method. Adding volatile to the ldfld fixes this: dupvolatile.ldfld bool Holder::stopbrfalse DoWork The volatile ldfld forces the field access to read direct from heap memory, which is then updated by the main thread, rather than using a cached copy. volatile in C# This highlights one of the differences between IL and C#. In IL, volatile only applies to the prefixed instruction, whereas in C#, volatile is specified on a field to indicate that all accesses to that field should be volatile (interestingly, there's no mention of the 'no caching' aspect of volatile in the C# spec; it only focuses on the memory barrier aspect). Furthermore, this information needs to be stored within the assembly somehow, as such a field might be accessed directly from outside the assembly, but there's no concept of a 'volatile field' in IL! How this information is stored with the field will be the subject of my next post.

    Read the article

  • Big GRC: Turning Data into Actionable GRC Intelligence

    - by Jenna Danko
    While it’s no longer headline news that Governments have carried out large scale data-mining programmes aimed at terrorism detection and identifying other patterns of interest across a wide range of digital data sources, the debate over the ethics and justification over this action, will clearly continue for some time to come. What is becoming clear is that these programmes are a framework for the collation and aggregation of massive amounts of unstructured data and from this, the creation of actionable intelligence from analyses that allowed the analysts to explore and extract a variety of patterns and then direct resources. This data included audio and video chats, phone calls, photographs, e-mails, documents, internet searches, social media posts and mobile phone logs and connections. Although Governance, Risk and Compliance (GRC) professionals are not looking at the implementation of such programmes, there are many similar GRC “Big data” challenges to be faced and potential lessons to be learned from these high profile government programmes that can be applied a lot closer to home. For example, how can GRC professionals collect, manage and analyze an enormous and disparate volume of data to create and manage their own actionable intelligence covering hidden signs and patterns of criminal activity, the early or retrospective, violation of regulations/laws/corporate policies and procedures, emerging risks and weakening controls etc. Not exactly the stuff of James Bond to be sure, but it is certainly more applicable to most GRC professional’s day to day challenges. So what is Big Data and how can it benefit the GRC process? Although it often varies, the definition of Big Data largely refers to the following types of data: Traditional Enterprise Data – includes customer information from CRM systems, transactional ERP data, web store transactions, and general ledger data. Machine-Generated /Sensor Data – includes Call Detail Records (“CDR”), weblogs and trading systems data. Social Data – includes customer feedback streams, micro-blogging sites like Twitter, and social media platforms like Facebook. The McKinsey Global Institute estimates that data volume is growing 40% per year, and will grow 44x between 2009 and 2020. But while it’s often the most visible parameter, volume of data is not the only characteristic that matters. In fact, according to sources such as Forrester there are four key characteristics that define big data: Volume. Machine-generated data is produced in much larger quantities than non-traditional data. This is all the data generated by IT systems that power the enterprise. This includes live data from packaged and custom applications – for example, app servers, Web servers, databases, networks, virtual machines, telecom equipment, and much more. Velocity. Social media data streams – while not as massive as machine-generated data – produce a large influx of opinions and relationships valuable to customer relationship management as well as offering early insight into potential reputational risk issues. Even at 140 characters per tweet, the high velocity (or frequency) of Twitter data ensures large volumes (over 8 TB per day) need to be managed. Variety. Traditional data formats tend to be relatively well defined by a data schema and change slowly. In contrast, non-traditional data formats exhibit a dizzying rate of change. Without question, all GRC professionals work in a dynamic environment and as new services, new products, new business lines are added or new marketing campaigns executed for example, new data types are needed to capture the resultant information.  Value. The economic value of data varies significantly. Typically, there is good information hidden amongst a larger body of non-traditional data that GRC professionals can use to add real value to the organisation; the greater challenge is identifying what is valuable and then transforming and extracting that data for analysis and action. For example, customer service calls and emails have millions of useful data points and have long been a source of information to GRC professionals. Those calls and emails are critical in helping GRC professionals better identify hidden patterns and implement new policies that can reduce the amount of customer complaints.   Now on a scale and depth far beyond those in place today, all that unstructured call and email data can be captured, stored and analyzed to reveal the reasons for the contact, perhaps with the aggregated customer results cross referenced against what is being said about the organization or a similar peer organization on social media. The organization can then take positive actions, communicating to the market in advance of issues reaching the press, strengthening controls, adjusting risk profiles, changing policy and procedures and completely minimizing, if not eliminating, complaints and compensation for that specific reason in the future. In this one example of many similar ones, the GRC team(s) has demonstrated real and tangible business value. Big Challenges - Big Opportunities As pointed out by recent Forrester research, high performing companies (those that are growing 15% or more year-on-year compared to their peers) are taking a selective approach to investing in Big Data.  "Tomorrow's winners understand this, and they are making selective investments aimed at specific opportunities with tangible benefits where big data offers a more economical solution to meet a need." (Forrsights Strategy Spotlight: Business Intelligence and Big Data, Q4 2012) As pointed out earlier, with the ever increasing volume of regulatory demands and fines for getting it wrong, limited resource availability and out of date or inadequate GRC systems all contributing to a higher cost of compliance and/or higher risk profile than desired – a big data investment in GRC clearly falls into this category. However, to make the most of big data organizations must evolve both their business and IT procedures, processes, people and infrastructures to handle these new high-volume, high-velocity, high-variety sources of data and be able integrate them with the pre-existing company data to be analyzed. GRC big data clearly allows the organization access to and management over a huge amount of often very sensitive information that although can help create a more risk intelligent organization, also presents numerous data governance challenges, including regulatory compliance and information security. In addition to client and regulatory demands over better information security and data protection the sheer amount of information organizations deal with the need to quickly access, classify, protect and manage that information can quickly become a key issue  from a legal, as well as technical or operational standpoint. However, by making information governance processes a bigger part of everyday operations, organizations can make sure data remains readily available and protected. The Right GRC & Big Data Partnership Becomes Key  The "getting it right first time" mantra used in so many companies remains essential for any GRC team that is sponsoring, helping kick start, or even overseeing a big data project. To make a big data GRC initiative work and get the desired value, partnerships with companies, who have a long history of success in delivering successful GRC solutions as well as being at the very forefront of technology innovation, becomes key. Clearly solutions can be built in-house more cheaply than through vendor, but as has been proven time and time again, when it comes to self built solutions covering AML and Fraud for example, few have able to scale or adapt appropriately to meet the changing regulations or challenges that the GRC teams face on a daily basis. This has led to the creation of GRC silo’s that are causing so many headaches today. The solutions that stand out and should be explored are the ones that can seamlessly merge the traditional world of well-known data, analytics and visualization with the new world of seemingly innumerable data sources, utilizing Big Data technologies to generate new GRC insights right across the enterprise.Ultimately, Big Data is here to stay, and organizations that embrace its potential and outline a viable strategy, as well as understand and build a solid analytical foundation, will be the ones that are well positioned to make the most of it. A Blueprint and Roadmap Service for Big Data Big data adoption is first and foremost a business decision. As such it is essential that your partner can align your strategies, goals, and objectives with an architecture vision and roadmap to accelerate adoption of big data for your environment, as well as establish practical, effective governance that will maintain a well managed environment going forward. Key Activities: While your initiatives will clearly vary, there are some generic starting points the team and organization will need to complete: Clearly define your drivers, strategies, goals, objectives and requirements as it relates to big data Conduct a big data readiness and Information Architecture maturity assessment Develop future state big data architecture, including views across all relevant architecture domains; business, applications, information, and technology Provide initial guidance on big data candidate selection for migrations or implementation Develop a strategic roadmap and implementation plan that reflects a prioritization of initiatives based on business impact and technology dependency, and an incremental integration approach for evolving your current state to the target future state in a manner that represents the least amount of risk and impact of change on the business Provide recommendations for practical, effective Data Governance, Data Quality Management, and Information Lifecycle Management to maintain a well-managed environment Conduct an executive workshop with recommendations and next steps There is little debate that managing risk and data are the two biggest obstacles encountered by financial institutions.  Big data is here to stay and risk management certainly is not going anywhere, and ultimately financial services industry organizations that embrace its potential and outline a viable strategy, as well as understand and build a solid analytical foundation, will be best positioned to make the most of it. Matthew Long is a Financial Crime Specialist for Oracle Financial Services. He can be reached at matthew.long AT oracle.com.

    Read the article

  • PARTNER WEBCAST- ORACLE COMPETENCE - PROGRAM (COMPETENCE VIRTUAL)

    - by mseika
    I am pleased to invite you to join the second (Competence Virtual). In Competence - program we will present Oracle Applications' Product's new functions and features including sales positioning. The key objectives of these webcasts are to inspire System Integrator's implementation personnel to conduct successful after sales in their Customer projects. Competencewill be presented on 1st Monday of each quarter after the billable day (4:00 to 5:00 PM CET). The webcast is intended for System Integrator's Implementation Certified Specialists but Competence is open for other interested Oracle Applications system Integrator's personnel as well. At first, two Oracle representatives will discuss Oracle's contribution to Partners. Then you will see product breakout session followed by Q&A with Oracle Experts. Each session will last for maximum 1 hour. A Q&A Document covering all questions and answers will be made available two weeks after the webcast. What are the Benefits for Partners? Find out how Competence helps you to improve your after sales Discover new functions and features so you can enrich your Customer’s solution Learn more about Oracle Applications products, especially sales positioning Hear crucial questions raised by colleagues alike, learn from their interest Engage and present your questions to subject experts Be inspired of the richness of Oracle Applications portfolio – for your and your Customer’s benefit.   Note: Should you already be familiar with a specific Product, then choose another one. Doing so you would expand your knowledge of the overall Applications portfolio. Some presentations contain product demonstration, although these presentations are not intended to be extremely detailed technical presentations. Product breakout sessions:- Fusion CRM: Effective, Efficient and Easy- Fusion HCM: Talent management overview performance, goals, talent review- Distributed Order Management - Fusion SCM Solution- Oracle Transportation Management- Oracle Value Chain Planning: Demantra Sales & Operation Planning and Demantra Demand Management- Oracle CX (Customer Experience) - formerly CEM: Powering Great Customer Experiences- EPM 11.1.2.2 Overview- Oracle Hyperion Profitability and Cost Management, 11.1.2.1 For more details please visit and other breakout sessions on OPN page. Delivery FormatCompetence- program (Competence Virtual) is a series of FREE prerecorded Applications product presentations followed by Q&A. It will be delivered over the Web. Participants have the opportunity to submit questions during the cast via chat and subject matter experts will provide verbal answers live. Competence consists of several parallel prerecorded product breakout sessions, each lasting for max. 1 hour. At first, two Oracle representatives will discuss Oracle’s contribution to Partners. Then you’ll see the product breakout sessions followed by Q&A with Oracle Experts. A Q&A document covering all questions and answers will be made available two weeks after the webcast. You can also see Competence afterwards as its content will be available online for the next 6-12 months.The next Competence web casts will be presented as follows: June the 4th  2012 September the 3rd  2012 December the 3rd  2012 March the 4th  2013. Note: Depending on local network bandwidth please allow some seconds time the presentations to download. You might want to refresh your screen by pressing F5. DurationMaximum 1 hour For further information please contact me at [email protected]. Best regards Markku RouhiainenDirector, Applications Partner EnablementWestern Europe

    Read the article

  • How do I use setFilmSize in panda3d to achieve the correct view?

    - by lhk
    I'm working with Panda3d and recently switched my game to isometric rendering. I moved the virtual camera accordingly and set an orthographic lens. Then I implemented the classes "Map" and "Canvas". A canvas is a dynamically generated mesh: a flat quad. I'm using it to render the ingame graphics. Since the game itself is still set in a 3d coordinate system I'm planning to rely on these canvases to draw sprites. I could have named this class "Tile" but as I'd like to use it for non-tile sketches (enemies, environment) as well I thought canvas would describe it's function better. Map does exactly what it's name suggests. Its constructor receives the number of rows and columns and then creates a standard isometric map. It uses the canvas class for tiles. I'm planning to write a map importer that reads a file to create maps on the fly. Here's the canvas implementation: class Canvas: def __init__(self, texture, vertical=False, width=1,height=1): # create the mesh format=GeomVertexFormat.getV3t2() format = GeomVertexFormat.registerFormat(format) vdata=GeomVertexData("node-vertices", format, Geom.UHStatic) vertex = GeomVertexWriter(vdata, 'vertex') texcoord = GeomVertexWriter(vdata, 'texcoord') # add the vertices for a flat quad vertex.addData3f(1, 0, 0) texcoord.addData2f(1, 0) vertex.addData3f(1, 1, 0) texcoord.addData2f(1, 1) vertex.addData3f(0, 1, 0) texcoord.addData2f(0, 1) vertex.addData3f(0, 0, 0) texcoord.addData2f(0, 0) prim = GeomTriangles(Geom.UHStatic) prim.addVertices(0, 1, 2) prim.addVertices(2, 3, 0) self.geom = Geom(vdata) self.geom.addPrimitive(prim) self.node = GeomNode('node') self.node.addGeom(self.geom) # this is the handle for the canvas self.nodePath=NodePath(self.node) self.nodePath.setSx(width) self.nodePath.setSy(height) if vertical: self.nodePath.setP(90) # the most important part: "Drawing" the image self.texture=loader.loadTexture(""+texture+".png") self.nodePath.setTexture(self.texture) Now the code for the Map class class Map: def __init__(self,rows,columns,size): self.grid=[] for i in range(rows): self.grid.append([]) for j in range(columns): # create a canvas for the tile. For testing the texture is preset tile=Canvas(texture="../assets/textures/flat_concrete",width=size,height=size) x=(i-1)*size y=(j-1)*size # set the tile up for rendering tile.nodePath.reparentTo(render) tile.nodePath.setX(x) tile.nodePath.setY(y) # and store it for later access self.grid[i].append(tile) And finally the usage def loadMap(self): self.map=Map(10, 10, 1) this function is called within the constructor of the World class. The instantiation of world is the entry point to the execution. The code is pretty straightforward and runs good. Sadly the output is not as expected: Please note: The problem is not the white rectangle, it's my player object. The problem is that although the map should have equal width and height it's stretched weirdly. With orthographic rendering I expected the map to be a perfect square. What did I do wrong ? UPDATE: I've changed the viewport. This is how I set up the orthographic camera: lens = OrthographicLens() lens.setFilmSize(40, 20) base.cam.node().setLens(lens) You can change the "aspect" by modifying the parameters of setFilmSize. I don't know exactly how they are related to window size and screen resolution but after testing a little the values above seem to work for me. Now everything is rendered correctly as long as I don't resize the window. Every change of the window's size as well as switching to fullscreen destroys the correct rendering. I know that implementing a listener for resize events is not in the scope of this question. However I wonder why I need to make the Film's height two times bigger than its width. My window is quadratic ! Can you tell me how to find out correct setting for the FilmSize ? UPDATE 2: I can imagine that it's hard to envision the behaviour of the game. At first glance the obvious solution is to pass the window's width and height in pixels to setFilmSize. There are two problems with that approach. The parameters for setFilmSize are ingame units. You'll get a way to big view if you pass the pixel size For some strange reason the image is distorted if you pass equal values for width and height. Here's the output for setFilmSize(800,800) You'll have to stress your eyes but you'll see what I mean

    Read the article

  • Pong Collision Help in C# w/ XNA

    - by Ramses Brown
    Edit: My goal is to have it function like this: Ball hits 1st Quarter = rebounds higher (aka Y++) Ball hits 2nd Quarter = rebounds higher (using random value) Ball hits 3rd Quarter = rebounds lower (using random value) Ball hits 4th Quarter = rebounds lower (aka Y--) I'm currently using Rectangle Collision for my collision detection, and it's worked. Now I wish to expand it. Instead of it simply detecting whether or not the paddle/ball intersect, I want to make it so that it can determine what section of the paddle gets hit. I wanted it in 4 parts, with each having a different reaction to impact. My first thought is to base it on the Ball's Y position compared to the Paddle's Y position. But since I want it in 4 parts, I don't know how to do that. So it's essentially be if (ball.Y > Paddle.Y) { PaddleSection1 == true; } Except modified so that instead of being top half/bottom half, it's 1st Quarter, etc.

    Read the article

  • Using INotifyPropertyChanged in background threads

    - by digitaldias
    Following up on a previous blog post where I exemplify databinding to objects, a reader was having some trouble with getting the UI to update. Here’s the rough UI: The idea is, when pressing Start, a background worker process starts ticking at the specified interval, then proceeds to increment the databound Elapsed value. The problem is that event propagation is limeted to current thread, meaning, you fire an event in one thread, then other threads of the same application will not catch it. The Code behind So, somewhere in my ViewModel, I have a corresponding bethod Start that initiates a background worker, for example: public void Start( ) { BackgroundWorker backgroundWorker = new BackgroundWorker( ); backgroundWorker.DoWork += IncrementTimerValue; backgroundWorker.RunWorkerAsync( ); } protected void IncrementTimerValue( object sender, DoWorkEventArgs e ) { do { if( this.ElapsedMs == 100 ) this.ElapsedMs = 0; else this.ElapsedMs++; }while( true ); } Assuming that there is a property: public int ElapsedMs { get { return _elapsedMs; } set { if( _elapsedMs == value ) return; _elapsedMs = value; NotifyThatPropertyChanged( "ElapsedMs" ); } } The above code will not work. If you step into this code in debug, you will find that INotifyPropertyChanged is called, but it does so in a different thread, and thus the UI never catches it, and does not update. One solution Knowing that the background thread updates the ElapsedMs member gives me a chance to activate BackgroundWorker class’ progress reporting mechanism to simply alert the main thread that something has happened, and that it is probably a good idea to refresh the ElapsedMs binding. public void Start( ) { BackgroundWorker backgroundWorker = new BackgroundWorker( ); backgroundWorker.DoWork += IncrementTimerValue; // Listen for progress report events backgroundWorker.WorkerReportsProgress = true; // Tell the UI that ElapsedMs needs to update backgroundWorker.RunWorkerCompleted += ( sender, e ) => { NotifyThatPropertyChanged( "ElapsedMs" ) }; backgroundWorker.RunWorkerAsync( ); } protected void IncrementTimerValue( object sender, DoWorkEventArgs e ) { do { if( this.ElapsedMs == 100 ) this.ElapsedMs = 0; else this.ElapsedMs++; // report any progress ( sender as BackgroundWorker ).ReportProgress( 0 ); }while( true ); } What happens above now is that I’ve used the BackgroundWorker cross thread mechanism to alert me of when it is ok for the UI to update it’s ElapsedMs field. Because the property itself is being updated in a different thread, I’m removing the NotifyThatPropertyChanged call from it’s Set method, and moving that responsability to the anonymous method that I created in the Start method. This is one way of solving the issue of having a background thread update your UI. I would be happy to hear of other cross-threading mechanisms for working in a MCP/MVC/MVVM pattern.

    Read the article

  • Functional or non-functional requirement?

    - by killer_PL
    I'm wondering about functional or non-functional requirements. I have found lot of different definitions for those terms and I can't assign some of my requirement to proper category. I'm wondering about requirements that aren't connected with some action or have some additional conditions, for example: On the list of selected devices, device can be repeated. Database must contain at least 100 items Currency of some value must be in USD dollar. Device must have a name and power consumption value in Watts. are those requirements functional or non-functional ?

    Read the article

  • PhP Login/Register system [migrated]

    - by Marian
    I found this good tutorial on creating a login/register system using PhP and MySQL. The forum is around 5 years old (edited last year) but it can still be usefull. Beginner Simple Register-Login system There seems to be an issue with both login and register pages. <?php function register_form(){ $date = date('D, M, Y'); echo "<form action='?act=register' method='post'>" ."Username: <input type='text' name='username' size='30'><br>" ."Password: <input type='password' name='password' size='30'><br>" ."Confirm your password: <input type='password' name='password_conf' size='30'><br>" ."Email: <input type='text' name='email' size='30'><br>" ."<input type='hidden' name='date' value='$date'>" ."<input type='submit' value='Register'>" ."</form>"; } function register(){ $connect = mysql_connect("host", "username", "password"); if(!$connect){ die(mysql_error()); } $select_db = mysql_select_db("database", $connect); if(!$select_db){ die(mysql_error()); } $username = $_REQUEST['username']; $password = $_REQUEST['password']; $pass_conf = $_REQUEST['password_conf']; $email = $_REQUEST['email']; $date = $_REQUEST['date']; if(empty($username)){ die("Please enter your username!<br>"); } if(empty($password)){ die("Please enter your password!<br>"); } if(empty($pass_conf)){ die("Please confirm your password!<br>"); } if(empty($email)){ die("Please enter your email!"); } $user_check = mysql_query("SELECT username FROM users WHERE username='$username'"); $do_user_check = mysql_num_rows($user_check); $email_check = mysql_query("SELECT email FROM users WHERE email='$email'"); $do_email_check = mysql_num_rows($email_check); if($do_user_check > 0){ die("Username is already in use!<br>"); } if($do_email_check > 0){ die("Email is already in use!"); } if($password != $pass_conf){ die("Passwords don't match!"); } $insert = mysql_query("INSERT INTO users (username, password, email) VALUES ('$username', '$password', '$email')"); if(!$insert){ die("There's little problem: ".mysql_error()); } echo $username.", you are now registered. Thank you!<br><a href=login.php>Login</a> | <a href=index.php>Index</a>"; } switch($act){ default; register_form(); break; case "register"; register(); break; } ?> Once pressed the register button the page does nothing, fields are erased and no data is added inside the database or error given. I tought that the problem might be the switch($act){ part so I removed it and changed the page using a require require('connect.php'); where connect.php is <?php mysql_connect("localhost","host","password"); mysql_select_db("database"); ?> Removed the function register_form(){ and echo part turning it into an HTML code: <form action='register' method='post'> Username: <input type='text' name='username' size='30'><br> Password: <input type='password' name='password' size='30'><br> Confirm your password: <input type='password' name='password_conf' size='30'><br> Email: <input type='text' name='email' size='30'><br> <input type='hidden' name='date' value='$date'> <input type='submit' name="register" value='Register'> </form> And instead of having a function register(){ I replaced it with a if($register){ So when the Register button is pressed it runs the php code, but this edit doesn't seem to work either. So what can the problem be? If needed I can re-add this code on my Domain The login page has the same issue, nothing happens when the button is pressed beside emptying the fields.

    Read the article

  • Mapping Repeating Sequence Groups in BizTalk

    - by Paul Petrov
    Repeating sequence groups can often be seen in real life XML documents. It happens when certain sequence of elements repeats in the instance document. Here’s fairly abstract example of schema definition that contains sequence group: <xs:schemaxmlns:b="http://schemas.microsoft.com/BizTalk/2003"            xmlns:xs="http://www.w3.org/2001/XMLSchema"            xmlns="NS-Schema1"            targetNamespace="NS-Schema1" >  <xs:elementname="RepeatingSequenceGroups">     <xs:complexType>       <xs:sequencemaxOccurs="1"minOccurs="0">         <xs:sequencemaxOccurs="unbounded">           <xs:elementname="A"type="xs:string" />           <xs:elementname="B"type="xs:string" />           <xs:elementname="C"type="xs:string"minOccurs="0" />         </xs:sequence>       </xs:sequence>     </xs:complexType>  </xs:element> </xs:schema> And here’s corresponding XML instance document: <ns0:RepeatingSequenceGroupsxmlns:ns0="NS-Schema1">  <A>A1</A>  <B>B1</B>  <C>C1</C>  <A>A2</A>  <B>B2</B>  <A>A3</A>  <B>B3</B>  <C>C3</C> </ns0:RepeatingSequenceGroups> As you can see elements A, B, and C are children of anonymous xs:sequence element which in turn can be repeated N times. Let’s say we need do simple mapping to the schema with similar structure but with different element names: <ns0:Destinationxmlns:ns0="NS-Schema2">  <Alpha>A1</Alpha>  <Beta>B1</Beta>  <Gamma>C1</Gamma>  <Alpha>A2</Alpha>  <Beta>B2</Beta>  <Gamma>C2</Gamma> </ns0:Destination> The basic map for such typical task would look pretty straightforward: If we test this map without any modification it will produce following result: <ns0:Destinationxmlns:ns0="NS-Schema2">  <Alpha>A1</Alpha>  <Alpha>A2</Alpha>  <Alpha>A3</Alpha>  <Beta>B1</Beta>  <Beta>B2</Beta>  <Beta>B3</Beta>  <Gamma>C1</Gamma>  <Gamma>C3</Gamma> </ns0:Destination> The original order of the elements inside sequence is lost and that’s not what we want. Default behavior of the BizTalk 2009 and 2010 Map Editor is to generate compatible map with older versions that did not have ability to preserve sequence order. To enable this feature simply open map file (*.btm) in text/xml editor and find attribute PreserveSequenceOrder of the root <mapsource> element. Set its value to Yes and re-test the map: <ns0:Destinationxmlns:ns0="NS-Schema2">  <Alpha>A1</Alpha>  <Beta>B1</Beta>  <Gamma>C1</Gamma>  <Alpha>A2</Alpha>  <Beta>B2</Beta>  <Alpha>A3</Alpha>  <Beta>B3</Beta>  <Gamma>C3</Gamma> </ns0:Destination> The result is as expected – all corresponding elements are in the same order as in the source document. Under the hood it is achieved by using one common xsl:for-each statement that pulls all elements in original order (rather than using individual for-each statement per element name in default mode) and xsl:if statements to test current element in the loop:  <xsl:templatematch="/s0:RepeatingSequenceGroups">     <ns0:Destination>       <xsl:for-eachselect="A|B|C">         <xsl:iftest="local-name()='A'">           <Alpha>             <xsl:value-ofselect="./text()" />           </Alpha>         </xsl:if>         <xsl:iftest="local-name()='B'">           <Beta>             <xsl:value-ofselect="./text()" />           </Beta>         </xsl:if>         <xsl:iftest="local-name()='C'">           <Gamma>             <xsl:value-ofselect="./text()" />           </Gamma>         </xsl:if>       </xsl:for-each>     </ns0:Destination>  </xsl:template> BizTalk Map editor became smarter so learn and use this lesser known feature of XSLT 2.0 in your maps and XSL stylesheets.

    Read the article

  • A Visual Studio Release Grows in Brooklyn

    - by andrewbrust
    Yesterday, Microsoft held its flagship launch event for Office 2010 in Manhattan.  Today, the Redmond software company is holding a local launch event for Visual Studio (VS) 2010, in Brooklyn.  How come information workers get the 212 treatment and developers are relegated to 718? Well, here’s the thing: the Brooklyn Marriott is actually a great place for an event, but you need some intimate knowledge of New York City to know that.  NBC’s Studio 8H, where the Office launch was held yesterday (and from where SNL is broadcast) is a pretty small venue, but you’d need some inside knowledge to recognize that.  Likewise, while Office 2010 is a product whose value is apparent.  Appreciating VS 2010’s value takes a bit more savvy.  Setting aside its year-based designation, this release of VS, counting the old Visual Basic releases, is the 10th version of the product.  How can a developer audience get excited about an integrated development environment when it reaches double-digit version numbers?  Well, it can be tough.  Luckily, Microsoft sent Jay Schmelzer, a Group Program Manager from the Visual Studio team in Redmond, to come tell the Brooklyn audience why they should be excited. Turns out there’s a lot of reasons.  Support fro SharePoint development is a big one.  In previous versions of VS, that support has been anemic, at best.  Shortage of SharePoint developers is a huge issue in the industry, and this should help.  There’s also built in support for Windows Azure (Microsoft’s cloud platform) and, through a download, support for the forthcoming Windows Phone 7 platform.  ASP.NET MVC, a “close-to-the-metal” Web development option that does away with the Web Forms abstraction layer, has a first-class presence in VS.  So too does jQuery, the Open Source environment that makes JavaScript development a breeze.  The jQuery support is so good that Microsoft now contributes to that Open Source project and offers IntelliSense support for it in the code editor. Speaking of the VS code editor, it now supports multi-monitor setups, zoom-in, and block selection.  If you’re not a developer, this may sound confusing and minute.  I’ll just say that for people who are developers these are little things that really contribute to productivity, and that translates into lower development costs. The really cool demo, though, was around Visual Studio 2010’s new debugging features.  This stuff is hard to showcase, but I believe it’s truly breakthrough technology: imagine being able to step backwards in time to see what might have caused a bug.  Cool?  Now imagine being able to do that, even if you weren’t the tester and weren’t present while the testing was being done.  Then imagine being able to see a video screen capture of what the tester was doing with your app when the bug occurred.  VS 2010 allows all that.  This could be the demise of the IWOMM (“it works on my machine”) syndrome. After the keynote, I asked Schmelzer if any of Microsoft’s competitors have debugging tools that come close to VS 2010’s.  His answer was an earnest “we don’t think so.”  If that’s true, that’s a big deal, and a huge advantage for developer teams who adopt it.  It will make software development much cheaper and more efficient.  Kind of like holding a launch event at the Brooklyn Marriott instead of 30 Rock in Manhattan! VS 2010 (version 10) and Office 2010 (version 14) aren’t the only new product versions Microsoft is releasing right now.  There’s also SQL Server 2008 R2 (version 10.5), Exchange 2010 (version 8, I believe), SharePoint 2010 (version 4) and, of course, Windows 7.  With so many new versions at such levels of maturity, I think it’s fair to say Microsoft has reached middle-age.  How does a company stave off a potential mid-life crisis, especially when with young Turks like Google coming along and competing so fiercely?  Hard to say.  But if focusing on core value, including value that’s hard to play into a sexy demo, is part oft the answer, then Microsoft’s doing OK.  And if some new tricks, like Windows Phone 7, can gain some traction, that might round things out nicely. Are the legacy products old tricks, or are they revised classics?  I honestly don’t know, because it’s the market’s prerogative to pass that judgement.  I can say this though: based on today’s show, I think Microsoft’s been doing its homework.

    Read the article

  • BizTalk Send Ports, Delivery Notification and ACK / NACK messages

    - by Robert Kokuti
    Recently I worked on an orchestration which sent messages out to a Send Port on a 'fire and forget' basis. The idea was that once the orchestration passed the message to the Messagebox, it was left to BizTalk to manage the sending process. Should the send operation fail, the Send Port got suspended, and the orchestration completed asynchronously, regardless of the Send Port success or failure. However, we still wanted to log the sending success, using the ACK / NACK messages. On normal ports, BizTalk generates ACK / NACK messages back to the Messagebox, if the logical port's Delivery Notification property is set to 'Transmitted'. Unfortunately, this setting also causes the orchestration to wait for the send port's result, and should the Send Port fail, the orchestration will also receive a 'DeliveryFailureException' exception. So we may end up with a suspended port and a suspended orchestration - not the outcome wanted here, there was no value in suspending the orchestration in our case. There are a couple of ways to fix this: 1. Catch the DeliveryFailureException  (full type name Microsoft.XLANGs.BaseTypes.DeliveryFailureException) and do nothing in the orchestration's exception block. Although this works, it still slows down the orchestration as the orchestration still has to wait for the outcome of the send port operation. 2. Use a Direct Port instead, and set the ACK request on the message Context, prior passing to the port: msgToSend(BTS.AckRequired) = true; This has to be done in an expression shape, as a Direct logical port does not have Delivery Notification property - make sure to add a reference to Microsoft.BizTalk.GlobalPropertySchemas. Setting this context value in the message will cause the messaging agent to create an appropriate ACK or NACK message after the port execution. The ACK / NACK messages can be caught and logged by dedicated Send Ports, filtering on BTS.AckType value (which is either ACK or NACK). ACK/NACK messages are treated in a special way by BizTalk, and a useful feature is that the original message's context values are copied to the ACK/NACK message context - these can be used for logging the right information. Other useful context properties of the ACK/NACK messages: -  BTS.AckSendPortName can be used to identify the original send port. - BTS.AckOwnerID, aka http://schemas.microsoft.com/BizTalk/2003/system-properties.AckOwnerID - holds the instance ID of the failed Send Port - can be used to resubmit / terminate the instance Someone may ask, can we just turn off the Delivery Notification on a 'normal' port, and set the AckRequired property on the message as for a Direct port. Unfortunately, this does not work - BizTalk seems to remove this property automatically, if the message goes through a port where Delivery Notification is set to None.

    Read the article

  • The JDEdwards EnterpriseOne PreSales University

    - by Julien Haye
    Istanbul NOV 5-9 Wednesday, NOV 7 - It is raining outside and I am sitting in my hotel room (#106) in Istanbul and create my first blog entry. Today this blog was enabled and I am excited to have the ability to share my (first) thoughts with the EMEA JDE Partner Community. I am here in Istanbul because we are currently running the JDEdwards PreSales University Event series. This PreSales University is an established event series which we deliver the fifth time now and the first time in the ECEMEA region. Delegates value the openness and competence from the Product Strategy and Product Development Team from Denver and India. Together with the regional Oracle PreSales team we had very valuable discussions around product features and functions and about the business value of the new delivered applications and tools. Additionally the event provides endless opportunities to exchange ideas with other JD Edwards Partner and the Oracle PreSales Team. With its focus on sharing and learning, best practice, user experience and transforming technologies, delegates will leave this event with an abundance of new ideas and best practices to try for your coming projects and existing customer implementations. A day out of the office gives delegates a chance to gain a new perspective on their business processes. Everybody sees better ways of working just by being immersed in an environment where the focus is on using products more effectively. Apps Track: Highly concentrated participants in Istanbul listening to Jeff Erickson presenting the news about OneView Reporting. Jeff: We believe “The things you said”. The event is organized into two tracks, one for Apps and one for Tech. Everybody was able to learn new features and functions and how to position this products. The focus was on the new Apps release 9.1 and Tools Release 9.1.2 and their Value Propositions. For all topics hands-on exercises has been given to the participants. Even very experienced senior consultants did learn a lot from this event. In total we have 55 people registered and we still have some more content to deliver. By the way: Istanbul is a nice place to be. I already booked my next trip to this beautiful city. In two weeks we deliver the JD Edwards EECIS Executive Forum again in Istanbul. Once again a tough Agenda. I will let you know if I had the ability to have a walk outside and see a bit more of this beautiful city. At least I expect to have a different room number. Many greetings Hartmut WieseOracle Alliances & Channels EMEA

    Read the article

  • Endeca Information Discovery 3-Day Hands-on Training Workshop

    - by Mike.Hallett(at)Oracle-BI&EPM
    For Oracle Partners, on October 3-5, 2012 in Milan, Italy: Register here. Endeca Information Discovery plays a key role with your big data analysis and complements Oracle Business Intelligence Solutions such as OBIEE. This FREE hands-on workshop for Oracle Partners highlights technical know-how of the product and helps understand its value proposition. We will walk you through four key components of the product: Oracle Endeca Server—A highly scalable, search-analytical database that derives the data model based on the data presented to it, thereby reducing data modeling requirements. Studio—A highly interactive, component-based user interface for configuring advanced, yet intuitive, analytical applications. Integration Suite—Provides rapid unification and enrichment of diverse sources of information into a single integrated view. Extensible Value-Added Modules—Add-on modules that provide value quickly through configuration instead of custom coding. Topics covered will include Data Exploration with Endeca Information Discovery, Data Ingest, Project Lifecycle, Building an Endeca Server data model and advanced modeling techniques, and Working with Studio. Lab Outline The labs showcase Oracle Endeca Information Discovery components and functionality by providing expertise on features and know-how of building such applications. The hands-on activities are based on a Quick Start application provided during the class. Audience Oracle Partners, Big Data Analytics Developer and Architects BI and EPM Application Developers and Implementers, Data Warehouse Developers Equipment Requirements This workshop requires attendees to provide their own laptops for this class. Attendee laptops must meet the following minimum hardware/software requirements: Hardware 8GB RAM is highly recommended (Windows 64 bit Machine is required) 40 GB free space (includes staging) USB 2.0 port (at least one available) Software One of the following operating systems: 64-bit Windows host/laptop OS (Windows 7 or Windows Server 2008) 64-bit host/laptop OS with a Windows VM (Server, or Win 7, BIC2g, etc.) Internet Explorer 8.x , Firefox 3.6 or Firefox 6.0 WINRAR or 7ziputility to unzip workshop files: Download-able from http://www.win-rar.com/download.html Download-able from http://www.7zip.com/ Oracle Endeca Information Discovery Workshop Register here: October 3-5, 2012: Cinisello Balsamo, Milan.  We will confirm with you your place within 2 weeks. Questions?  Send email to: [email protected]  :  Oracle Platform Technologies Enablement Services.

    Read the article

  • What to "CRM" in San Francisco? CRM Highlights for OpenWorld '12

    - by Tony Berk
    There is plenty to SEE for CRM during OpenWorld in San Francisco, September 30 - October 4! As I mentioned in my earlier post about some of the keynote sessions, Is There a Cloud Over OpenWorld?, I'm going try to highlight some key sessions to help you find the best sessions for you. Interested to find out where Oracle CRM products are headed, then find your "roadmap" session. Here are some of the sessions in the CRM Track that you might want to consider attending for products you currently own or might consider for the future. I think you'll agree, there is quite a bit of investment going on across Oracle CRM. Please use OpenWorld Schedule Builder or check the OpenWorld Content Catalog for all of the session details and any time or location changes. Tip: Pre-enrolled session registrants via Schedule Builder are allowed into the session rooms before anyone else, so Schedule Builder will guarantee you a seat. Many of the sessions below will likely be at capacity. General Session: Oracle Fusion CRM—Improving Sales Effectiveness, Efficiency, and Ease of Use (Session ID: GEN9674) - Oct 2, 11:45 AM - 12:45 PM. Anthony Lye, Senior VP, Oracle leads this general session focused on Oracle Fusion CRM. Oracle Fusion CRM optimizes territories, combines quota management and incentive compensation, integrates sales and marketing, and cleanses and enriches data—all within a single application platform. Oracle Fusion can be configured, changed, and extended at runtime by end users, business managers, IT, and developers. Oracle Fusion CRM can be used from the Web, from a smartphone, from Microsoft Outlook, or from an iPad. Deloitte, sponsor of the CRM Track, will also present key concepts on CRM implementations. Oracle Fusion Customer Relationship Management: Overview/Strategy/Customer Experiences/Roadmap (CON9407) - Oct 1, 3:15PM - 4:15PM. In this session, learn how Oracle Fusion CRM enables companies to create better sales plans, generate more quality leads, and achieve higher win rates and find out why customers are adopting Oracle Fusion CRM. Gain a deeper understanding of the unique capabilities only Oracle Fusion CRM provides, and learn how Oracle’s commitment to CRM innovation is driving a wide range of future enhancements. Oracle RightNow CX Cloud Service Vision and Roadmap (CON9764) - Oct 1, 10:45 AM - 11:45 AM. Oracle RightNow CX Cloud Service combines Web, social, and contact center experiences for a unified, cross-channel service solution in the cloud, enabling organizations to increase sales and adoption, build trust, strengthen relationships, and reduce costs and effort. Come to this session to hear from Oracle experts about where the product is going and how Oracle is committed to accelerating the pace of innovation and value to its customers. Siebel CRM Overview, Strategy, and Roadmap (CON9700) - Oct 1, 12:15PM - 1:15PM. The world’s most complete CRM solution, Oracle’s Siebel CRM helps organizations differentiate their businesses. Come to this session to learn about the Siebel product roadmap and how Oracle is committed to accelerating the pace of innovation and value for its customers on this platform. Additionally, the session covers how Siebel customers can leverage many Oracle assets such as Oracle WebCenter Sites; InQuira, RightNow, and ATG/Endeca applications, and Oracle Policy Automation in conjunction with their current Siebel investments. Oracle Fusion Social CRM Strategy and Roadmap: Future of Collaboration and Social Engagement (CON9750) - Oct 4, 11:15 AM - 12:15 PM. Social is changing the customer experience! Come find out how Oracle can help you know your customers better, encourage brand affinity, and improve collaboration within your ecosystem. This session reviews Oracle’s social media solution and shows how you can discover hidden insights buried in your enterprise and social data. Also learn how Oracle Social Network revolutionizes how enterprise users work, collaborate, and share to achieve successful outcomes. Oracle CRM On Demand Strategy and Roadmap (CON9727) - Oct 1, 10:45AM - 11:45AM. Oracle CRM On Demand is a powerful cloud-based customer relationship management solution. Come to this session to learn directly from Oracle experts about future product plans and hear how Oracle is committed to accelerating the pace of innovation and value to its customers. Knowledge Management Roadmap and Strategy (CON9776) - Oct 1, 12:15PM - 1:15PM. Learn how to harness the knowledge created as a natural byproduct of day-to-day interactions to lower costs and improve customer experience by delivering the right answer at the right time across channels. This session includes an overview of Oracle’s product roadmap and vision for knowledge management for both the Oracle RightNow and Oracle Knowledge (formerly InQuira) product families. Oracle Policy Automation Roadmap: Supercharging the Customer Experience (CON9655) - Oct 1, 12:15PM - 1:15PM. Oracle Policy Automation delivers rapid customer value by streamlining the capture, analysis, and deployment of policies across every facet of the customer experience. This session discusses recent Oracle Policy Automation enhancements for policy analytics; the latest Oracle Policy Automation Connector for Siebel; and planned new capabilities, including availability with the Oracle RightNow product line. There is much more, so stay tuned for more highlights or check out the Content Catalog and search for your areas of interest. Which session are you most interested in? Make your suggestions! But no voting for Pearl Jam or Kings of Leon. Those are after hours! 

    Read the article

  • Custom Configuration Section Handlers

    Most .NET developers who need to store something in configuration tend to use appSettings for this purpose, in my experience.  More recently, the framework itself has helped things by adding the <connectionStrings /> section so at least these are in their own section and not adding to the appSettings clutter that pollutes most apps.  I recommend avoiding appSettings for several reasons.  In addition to those listed there, I would add that strong typing and validation are additional reasons to go the custom configuration section route. For my ASP.NET Tips and Tricks talk, I use the following example, which is a simple DemoSettings class that includes two fields.  The first is an integer representing how many attendees there are present for the talk, and the second is the title of the talk.  The setup in web.config is as follows: <configSections> <section name="DemoSettings" type="ASPNETTipsAndTricks.Code.DemoSettings" /> </configSections>   <DemoSettings sessionAttendees="100" title="ASP.NET Tips and Tricks DevConnections Spring 2010" /> Referencing the values in code is strongly typed and straightforward.  Here I have a page that exposes two properties which internally get their values from the configuration section handler: public partial class CustomConfig1 : System.Web.UI.Page { public string SessionTitle { get { return DemoSettings.Settings.Title; } } public int SessionAttendees { get { return DemoSettings.Settings.SessionAttendees; } } } Note that the settings are only read from the config file once after that they are cached so there is no need to be concerned about excessive file access. Now weve seen how to set it up on the config file and how to refer to the settings in code.  All that remains is to see the file itself: public class DemoSettings : ConfigurationSection { private static DemoSettings settings = ConfigurationManager.GetSection("DemoSettings") as DemoSettings; public static DemoSettings Settings{ get { return settings;} }   [ConfigurationProperty("sessionAttendees" , DefaultValue = 200 , IsRequired = false)] [IntegerValidator(MinValue = 1 , MaxValue = 10000)] public int SessionAttendees { get { return (int)this["sessionAttendees"]; } set { this["sessionAttendees"] = value; } }   [ConfigurationProperty("title" , IsRequired = true)] [StringValidator(InvalidCharacters = "~!@#$%^&*()[]{}/;\"|\\")] public string Title { get { return (string)this["title"]; } set { this["title"] = value; }   } } The class is pretty straightforward, but there are some important components to note.  First, it must inherit from System.Configuration.ConfigurationSection.  Next, as a convention I like to have a static settings member that is responsible for pulling out the section when the class is first referenced, and further to expose this collection via a static readonly property, Settings.  Note that the types of both of these are the type of my class, DemoSettings. The properties of the class, SessionAttendees and Title, should map to the attributes of the config element in the XML file.  The [ConfigurationProperty] attribute allows you to map the attribute name to the property name (thus using both XML standard naming conventions and C# naming conventions).  In addition, you can specify a default value to use if nothing is specified in the config file, and whether or not the setting must be provided (IsRequired).  If it is required, then it doesnt make sense to include a default value. Beyond defaults and required, you can specify more advanced validation rules for the configuration values using additional C# attributes, such as [IntegerValidator] and [StringValidator].  Using these, you can declaratively specify that your configuration values be in a given range, or omit certain forbidden characters, for instance.  Of course you can write your own custom validation attributes, and there are others specified in System.Configuration. Individual sections can also be loaded from separate files, using syntax like this: <DemoSettings configSource="demosettings.config" /> Summary Using a custom configuration section handler is not hard.  If your application or component requires configuration, I recommend creating a custom configuration handler dedicated to your app or component.  Doing so will reduce the clutter in appSettings, will provide you with strong typing and validation, and will make it much easier for other developers or system administrators to locate and understand the various configuration values that are necessary for a given application. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Height Map Mapping to "Chunked" Quadrilateralized Spherical Cube

    - by user3684950
    I have been working on a procedural spherical terrain generator for a few months which has a quadtree LOD system. The system splits the six faces of a quadrilateralized spherical cube into smaller "quads" or "patches" as the player approaches those faces. What I can't figure out is how to generate height maps for these patches. To generate the heights I am using a 3D ridged multi fractals algorithm. For now I can only displace the vertices of the patches directly using the output from the ridged multi fractals. I don't understand how I generate height maps that allow the vertices of a terrain patch to be mapped to pixels in the height map. The only thing I can think of is taking each vertex in a patch, plug that into the RMF and take that position and translate into u,v coordinates then determine the pixel position directly from the u,v coordinates and determine the grayscale color based on the height. I feel as if this is the right approach but there are a few other things that may further complicate my problem. First of all I intend to use "height maps" with a pixel resolution of 192x192 while the vertex "resolution" of each terrain patch is only 16x16 - meaning that I don't have any vertices to sample for the RMF for most of the pixels. The main reason the height map resolution is higher so that I can use it to generate a normal map (otherwise the height maps serve little purpose as I can just directly displace vertices as I currently am). I am pretty much following this paper very closely. This is, essentially, the part I am having trouble with. Using the cube-to-sphere mapping and the ridged multifractal algorithm previously described, a normalized height value ([0, 1]) is calculated. Using this height value, the terrain position is calculated and stored in the first three channels of the positionmap (RGB) – this will be used to calculate the normalmap. The fourth channel (A) is used to store the height value itself, to be used in the heightmap. The steps in the first sentence are my primary problem. I don't understand how the pixel positions correspond to positions on the sphere and what positions are sampled for the RMF to generate the pixels if only vertices cannot be used.

    Read the article

  • Configure Calendar Server 7 to Use the davUniqueId Attribute

    - by dabrain
    Starting with Calendar Server 7 Update 3 (Patch 08) we introduce a new attribute davUniqueId in the davEntity objectclass, to use as the unique identifier.  The reason behind this is quite simple, the LDAP operational attribute nsUniqueId  has been chosen as the default value used for the unique identifier. It was discovered that this choice has a potential serious downside. The problem with using nsUniqueId is that if the LDAP entry for a user, group, or resource is deleted and recreated in LDAP, the new entry would receive a different nsUniqueId value from the Directory Server, causing a disconnect from the existing account in the calendar database. As a result, recreated users cannot access their existing calendars. How To Configure Calendar Server to Use the davUniqueId Attribute? Populate the davUniqueId to the ldap users. You can create a LDIF output file only or (-x option) directly run the ldapmodify from the populate-davuniqueid shell script. # ./populate-davuniqueid -h localhost -p 389 -D "cn=Directory Manager" -w <passwd> -b "o=red" -O -o /tmp/out.ldif The ldapmodify might failed like below, in that case the LDAP entry already have the 'daventity' objectclass, in those cases run populate-davuniqueid script without the -O option. # ldapmodify -x -h localhost -p 389 -D "cn=Directory Manager" -w <passwd> -c -f /tmp/out.ldif modifying entry "uid=mparis,ou=People,o=vmdomain.tld,o=red" ldapmodify: Type or value exists (20) In this case the user 'mparis' already have the objectclass 'daventity', ldapmodify do not take care of this DN and just take the next DN (if you start ldapmodify with -c option otherwise it stop's completely) dn: uid=mparis,ou=People,o=vmdomain.tld,o=red changetype: modify add: objectclass objectclass: daventity - add: davuniqueid davuniqueid: 01a2c501-af0411e1-809de373-18ff5c8d Even run populate-davuniqueid without -O option or changing the outputfile to dn: uid=mparis,ou=People,o=vmdomain.tld,o=red changetype: modify add: davuniqueid davuniqueid: 01a2c501-af0411e1-809de373-18ff5c8d The ldapmodify works fine now. The only issue I see here is you need verify which user might need the 'daventity' objectclass as well. On the other hand start without the objectclass and only add the objectclass for the users where you get 'Objectclass violation' report. That's indicate the objectclass is missing. # ldapmodify -x -h localhost -p 389 -D "cn=Directory Manager" -w <passwd> -c -f /tmp/out.ldif modifying entry "uid=mparis,ou=People,o=vmdomain.tld,o=red" Now it is time to change the configuration to use the davuniquid attribute # ./davadmin config modify -o davcore.uriinfo.permanentuniqueid -v davuniqueid It is also needed to modfiy the search filter to use davuniqueid instead of nsuniqueid # ./davadmin config modify -o davcore.uriinfo.subjectattributes -v "cn davstore icsstatus mail mailalternateaddress davUniqueId  owner preferredlanguageuid objectclass ismemberof uniquemember memberurl mgrprfc822mailmember" Afterward IWC Calendar works fine and my test user able to access all his old events.

    Read the article

  • Can't change brightness on Toshiba l755 laptop

    - by albert
    I have a Toshiba l755 laptop, and I installed 12.04 64bit on it. The default brightness of the laptop is set to maximum value, and I can't change it. If I go to Configuration ? Brightness, the brightness doesn't change and neither does pressing the function keys. I tried changing some parameters of grub file, setting GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux acpi_backlight=vendor". When changing the brightness from configuration, the value of /sys/class/backlight/toshiba/brightess changes, but screen remains the same. If I use the key functions, it changes the "actual_brightness" files. I don't know what else can I do, any suggestions?

    Read the article

  • null values vs "empty" singleton for optional fields

    - by Uko
    First of all I'm developing a parser for an XML-based format for 3D graphics called XGL. But this question can be applied to any situation when you have fields in your class that are optional i.e. the value of this field can be missing. As I was taking a Scala course on coursera there was an interesting pattern when you create an abstract class with all the methods you need and then create a normal fully functional subclass and an "empty" singleton subclass that always returns false for isEmpty method and throws exceptions for the other ones. So my question is: is it better to just assign null if the optional field's value is missing or make a hierarchy described above and assign it an empty singleton implementation?

    Read the article

  • F# Objects &ndash; Integrating with the other .Net Languages &ndash; Part 1

    - by MarkPearl
    In the next few blog posts I am going to explore objects in F#. Up to now, my dabbling in F# has really been a few liners and while I haven’t reached the point where F# is my language of preference – I am already seeing the benefits of the language when solving certain types of programming problems. For me I believe that the F# language will be used in a silo like architecture and that the real benefit of having F# under your belt is so that you can solve problems that F# lends itself towards and then interact with other .Net languages in doing the rest. When I was still very new to the F# language I did the following post covering how to get F# & C# to talk to each other. Today I am going to use a similar approach to demonstrate the structure of F# objects when inter-operating with other languages. Lets start with an empty F# class … type Person() = class end   Very simple, and all we really have done is declared an object that has nothing in it. We could if we wanted to make an object that takes a constructor with parameters… the code for this would look something like this… type Person =     {         Firstname : string         Lastname : string     }   What’s interesting about this syntax is when you try and interop with this object from another .Net language like C# - you would see the following…   Not only has a constructor been created that accepts two parameters, but Firstname and Lastname are also exposed on the object. Now it’s important to keep in mind that value holders in F# are immutable by default, so you would not be able to change the value of Firstname after the construction of the object – in C# terms it has been set to readonly. One could however explicitly state that the value holders were mutable, which would then allow you to change the values after the actual creation of the object. type Person = { mutable Firstname : string mutable Lastname : string }   Something that bugged me for a while was what if I wanted to have an F# object that requires values in its constructor, but does not expose them as part of the object. After bashing my head for a few moments I came up with the following syntax – which achieves this result. type Person(Firstname : string, Lastname : string) = member v.Fullname = Firstname + " " + Lastname What I haven’t figured out yet is what is the difference between the () & {} brackets when declaring an object.

    Read the article

  • 9/13 Live Webcast!!! Drive Innovation from Big Data Don't delay - register now!

    - by jgelhaus
    Big data solutions can help you find new insights, capitalize on hidden relationships, and deliver new value to your business. But to derive real business value from big data, you need the right tools and the right strategy. Join the live 9/13 Webcast to get an inside look at the benefits of big data and how you can realize them in your own IT infrastructure. We’ll discuss: The defining characteristics of big data Various big data use cases and examples Requirements for new skills and software Highlights of the Oracle big data platform Register now for the live Webcast on 9/13! It's your chance to talk with the Big Data gurus and discover solutions to data challenges that have eluded your data center—until now.

    Read the article

  • Loops, Recursion and Memoization in JavaScript

    - by Ken Dason
    Originally posted on: http://geekswithblogs.net/kdason/archive/2013/07/25/loops-recursion-and-memoization-in-javascript.aspxAccording to Wikipedia, the factorial of a positive integer n (denoted by n!) is the product of all positive integers less than or equal to n. For example, 5! = 5 x 4 x 3 x 2 x 1 = 120. The value of 0! is 1. We can use factorials to demonstrate iterative loops and recursive functions in JavaScript.  Here is a function that computes the factorial using a for loop: Output: Time Taken: 51 ms Here is the factorial function coded to be called recursively: Output: Time Taken: 165 ms We can speed up the recursive function with the use of memoization.  Hence,  if the value has previously been computed, it is simply returned and the recursive call ends. Output: Time Taken: 17 ms

    Read the article

  • Using Validation Groups Inside ASP.NET User Controls

    - by bipinjoshi
    Validation groups allow you to validate data entry controls in groups. Server controls such as validation controls, Button and TextBox have ValidationGroup property that takes a string value. All the server controls having the same ValidationGroup value act as one validation group. Validation groups come handy in situations where you wish to validate only a small set of controls from many controls housed on a Web Form. Using validation groups is quite easy and straightforward. However, if you have a validation group inside a user control and there are more than one user control instances on a Web Form you face some problem.http://www.binaryintellect.net/articles/13427d3d-1f98-4dc0-849b-72e95b8b66a2.aspx 

    Read the article

  • Defaulting the HLSL Vertex and Pixel Shader Levels to Feature Level 9_1 in VS 2012

    - by Michael B. McLaughlin
    I love Visual Studio 2012. But this is not a post about that. This is a post about tweaking one particular parameter that I’ve found a bit annoying. Disclaimer: You will be modifying important MSBuild files. If you screw up you will break your build tools. And maybe your computer will catch fire. I’m not responsible. No warranties or guaranties of any sort. This info is provided “as is”. By default, if you add a new vertex shader or pixel shader item to a project, it will be set to build with shader profile 4.0_level_9_3. If you need 9_3 functionality, this is all well and good. But (especially for Windows Store apps) you really want to target the lowest shader profile possible so that your game will run on as many computers as possible. So it’s a good idea to default to 9_1. To do this you could add in new HLSL files via “Add->New Item->Visual C++->HLSL->______ Shader File (.hlsl)” and then edit the shader files’ properties to set them manually to use 9_1 via “Properties->HLSL Compiler->General->Shader Model”. This is fine unless you forget to do this once and then submit your game with 9_3 shaders instead of 9_1 shaders to the Windows Store or to some other game store. Then you’d wind up with either rejection or angry “this doesn’t work on my computer! ripoff!” messages. There’s another option though. In “Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\ItemTemplates\VC\HLSL\1033\VertexShader” (note the path might vary slightly for you if you are using a 32-bit system or have a non-ENU version of Visual Studio 2012) you will find a “VertexShader.vstemplate” file. If you open this file in a text editor (e.g. Notepad++), then inside the CustomParameters tag within the TemplateContent tag you should see a CustomParameter tag for the ShaderType, i.e.: <CustomParameter Name="$ShaderType$" Value="Vertex"/> On a new line, we are going to add another CustomParameter tag to the CustomParameters tag. It will look like this: <CustomParameter Name="$ShaderModel$" Value="4.0_level_9_1"/> such that we now have:     <CustomParameters>       <CustomParameter Name="$ShaderType$" Value="Vertex"/>       <CustomParameter Name="$ShaderModel$" Value="4.0_level_9_1"/>     </CustomParameters> You can then save the file (you will need to be an Administrator or have Administrator access). Back in the 1033 directory (or whatever the number is for your language), go into the “PixelShader” directory. Edit the “PixelShader.vstemplate” file and make the same change (note that this time $ShaderType$ is “Pixel” not “Vertex”; you shouldn’t be changing that line anyway, but if you were to just copy and replace the above four lines then you will wind up creating pixel shaders that the HLSL compiler would try to compile as vertex shaders, with all sort of weird errors as a result). Once you’ve added the $ShaderModel$ line to “PixelShader.vstemplate” and have saved it, everything should be done. Since Feature Level 9_1 and 9_3 don’t support any of the other shader types, those are set to default to their appropriate minimums already (Compute and Geometry are set to “4.0” and Domain and Hull are set to “5.0”, which are their respective minimums (though not all 4.0 cards support Compute shaders; they were an optional feature added with DirectX 10.1 and only became required for DirectX 11 hardware). In case you are wondering where these magic values come from, you can find them all in the “fxc.xml” file in the “\Program Files (x86)\MSBuild\Microsoft.CPP\v4.0\V110\1033” directory (or whatever your language number is; 1033 is ENU and various other product languages have their own respective numbers (see: http://msdn.microsoft.com/en-us/goglobal/bb964664.aspx ) such that Japanese is 1041 (for example), though for all I know MSBuild tasks might be 1033 for everyone). If, like me, you installed VS 2012 to a drive other than the C:\ drive, you will find the vstemplate files in the drive to which you installed VS 2012 (D:\ in my case) but you will find the fxc.xml file on the C:\ drive. You should not edit fxc.xml. You will almost definitely break things by doing that; it’s just something you can look through to see all the other options that the FXC task takes such that you could, if needed, add further CustomParameter tags if you wanted to default to other supported options. I haven’t tried any others though so I don’t have any advice on how to set them.

    Read the article

  • ReSharper C# Live Template for Read-Only Dependency Property and Routed Event Boilerplate

    - by Bart Read
    Following on from my previous post, where I shared a Live Template for quickly declaring a normal read-write dependency property and its associated property change event boilerplate, here's an unsurprisingly similar template for creating a read-only dependency property.        #region $PROPNAME$ Read-Only Property and Property Change Routed Event        private static readonly DependencyPropertyKey $PROPNAME$PropertyKey =                                             DependencyProperty.RegisterReadOnly(             "$PROPNAME$", typeof ( $PROPTYPE$ ), typeof ( $DECLARING_TYPE$ ),             new PropertyMetadata( $DEF_VALUE$ , On$PROPNAME$Changed ) );       public static readonly DependencyProperty $PROPNAME$Property =                                           $PROPNAME$PropertyKey.DependencyProperty;        public $PROPTYPE$ $PROPNAME$         {             get { return ( $PROPTYPE$ ) GetValue( $PROPNAME$Property ); }             private set { SetValue( $PROPNAME$PropertyKey, value ); }         }       public static readonly RoutedEvent $PROPNAME$ChangedEvent   =                                           EventManager.RegisterRoutedEvent(           "$PROPNAME$Changed",           RoutingStrategy.$ROUTINGSTRATEGY$,           typeof( RoutedPropertyChangedEventHandler< $PROPTYPE$ > ),           typeof( $DECLARING_TYPE$ ) );       public event RoutedPropertyChangedEventHandler< $PROPTYPE$ > $PROPNAME$Changed       {           add { AddHandler( $PROPNAME$ChangedEvent, value ); }           remove { RemoveHandler( $PROPNAME$ChangedEvent, value ); }       }        private static void On$PROPNAME$Changed(           DependencyObject d, DependencyPropertyChangedEventArgs e)         {             var $DECLARING_TYPE_var$ = d as $DECLARING_TYPE$;            var args = new RoutedPropertyChangedEventArgs< $PROPTYPE$ >(               ( $PROPTYPE$ ) e.OldValue,               ( $PROPTYPE$ ) e.NewValue );           args.RoutedEvent    = $DECLARING_TYPE$.$PROPNAME$ChangedEvent;           $DECLARING_TYPE_var$.RaiseEvent( args );$END$        }        #endregion The only real difference here is the addition of the DependencyPropertyKey, which allows your implementation to set the value of the dependency property without exposing the setter code to consumers of your type. You'll probably find that you create read-only dependency properties much less often than read-write properties, but this should still save you some typing when you do need to do so. Technorati Tags: resharper,live template,c#,dependency property,read-only,routed events,property change,boilerplate,wpf

    Read the article

< Previous Page | 472 473 474 475 476 477 478 479 480 481 482 483  | Next Page >