Search Results

Search found 14256 results on 571 pages for 'home offices'.

Page 477/571 | < Previous Page | 473 474 475 476 477 478 479 480 481 482 483 484  | Next Page >

• Computer always freezing after random periods of time. No errors listed.

  - by Wesley

  Hi, all. Here are my specs beforehand: AMD Athlon XP 2400+ @ 2.00 GHz, 160GB IDE HDD, 128MB GeForce 6200 AGP, 2 x 512MB PC3200 DDR RAM, CoolMax 350W PSU, 1 x CD-RW Drive, 1 x DVD-ROM Drive, FIC AM37 Mobo, Windows XP Pro SP3 My desktop freezes after random periods of time but there are no errors listed in the Event Viewer after a forced shutdown and restart. A couple months ago, I found that when it froze, the floppy was being accessed at the same time. So, I disconnected the floppy (since I never used it anyways) from the power supply and motherboard. Everything was working fine and the computer never froze. This past Christmas break, I left for a Conference and when I got home, the computer kept freezing again. So, this time, I just disconnected the DVD reader (from mobo and power) and started it up. Still, it froze almost right away. Then I found some older sticks of RAM (2 x 256MB PC2100 DDR) and swapped them in. Everything worked fine again after that. I even swapped the 2 x 512MB PC3200 DDR RAM back in and everything worked okay. Then it started freezing again, and I tried all possible RAM combos, still freezing within 5-10 minutes of startup. One thing I've realized is that the floppy drive is still listed in My Computer and I uninstalled it from my Device Manager already. There were no software errors, and I uninstalled the most recent software, with no effect. Still, I have no idea what is wrong because everything ran fine before that. Any suggestions? EDIT: Still have yet to buy some blank CD media to use Memtest86+. However, would a lack of virtual memory cause the computer to freeze? EDIT2: So after a long time, I ran Memtest86+ and all is well. Turns out though, after removing my original DVD reader and replacing it with a DVD-ROM drive, there is no freezing whatsoever! Thanks for all your suggestions!

  Read the article

• Wireless very slow on one laptop on network, all other machines normal?

  - by th3dude19

  My new laptop (Acer Aspire Timeine 3810TZ running Windows 7 Home Premium 64bit) is acting very strange on my wireless network. Below are the issues I'm noticing... The connection frequently drops. I see the icon change from 'full bars' to 'empty bars with yellow star (meaning no connection)' occasionally. Almost every website I visit (Firefox) hangs for a long time on 'Looking up www.amazon.com' for example. After a long pause, it finally starts loading the website. Neither of these problems exist on any other machines on my network. I also have a desktop running the same OS wirelessly and it works fine. I've run several Speedtest.net tests and the speeds are great (20MBit down/4 up). Results from pingtest.net are as follows: Line quality: D Ping: 46ms Jitter: 65ms Packet Loss: 9% These results are to a server that is less than 10 miles from my residence. The results on the other machines in my house are normal. Any suggestions? This is becoming very annoying as I purchased this machine primarily for browsing.

  Read the article

• correct file permissions for trac and git user to access gitolite server repos

  - by klemens

  hi, sounds like a stupid questions (to me), but i couldn't find any info. on my server i host some git repositories via gitolite, and have a trac for every repository. i have a user called git to push/pull from server (git clone git@server:repo). and trac is a apache vhost with mod_wsgi. this runs with the www-data user. so what riddles me (maybe because I have not much of a clue about file-permissions at all) is whats the best permissions setup (chown, chmod) for the git repositories (/home/git/repositories/...). www-data (or trac) needs to at least read permissions (i think). and git (or gitolite) needs obviously read/write permissions to push changesets. i tried a little bit around (i.e. adding www-data and/or git to the www-data/git group), but didn't got it right. at least one of the two don't work (git or trac). any suggestions are highly appreciated. regard, klemens

  Read the article

• Setting up httpd-vhosts.conf for multiple virtual hosts

  - by Chris Sobolewski

  I have a simple test setup using xampp at home, and I am getting really weird behavior when I attempt to set up multiple virtual hosts on this box. Here is my vhosts file: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] ServerName foo DocumentRoot "D:\wamp\xampp\htdocs\foo" ErrorLog logs/foo-error_log CustomLog logs/foo-access_log common <Directory "D:\wamp\xampp\htdocs\foo"> Options Indexes FollowSymLinks Includes execCGI AllowOverride All Order Allow,Deny Allow From All </Directory> </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] ServerName bar DocumentRoot "D:\wamp\xampp\htdocs\bar" ErrorLog logs/bar-error_log CustomLog logs/bar-access_log common <Directory "D:\wamp\xampp\htdocs\bar"> Options Indexes FollowSymLinks Includes execCGI AllowOverride All Order Allow,Deny Allow From All </Directory> </VirtualHost> When I attempt to run visit the first site, it works as expected. When I attempt to run the second site, I get a weird hybrid mishmash of both sites. It's the weirdest thing.

  Read the article

• VPN on a ubuntu server limited to certain ips

  - by Hultner

  I got an server running Ubuntu Server 9.10 and I need access to it and other parts of my network sometimes when not at home. There's two places I need to access the VPN from. One of the places to an static IP and the other got an dynamic but with DynDNS setup so I can always get the current IP if I want to. Now when it comes to servers people call me kinda paranoid but security is always my number one priority and I never like to allow access to the server outside the network therefor I have two things I have to have on this VPN. One it shouldn't be accessiable from any other IP then these 2 and two it has to use a very secure key so it will be virtually impossible to bruteforce even from the said IP´s. I have no experience what so ever in setting up VPNs, I have used SSH tunneling but never an actuall VPN. So what would be the best, most stable, safest and performance effiecent way to set this up on a Ubuntu Server? Is it possible or should I just set up some kind of SSH Tunnel instead? Thanks on beforehand for answers.

  Read the article

• Require and Includes not Functioning Nginx Fpm/FastCGI

  - by Vince Kronlein

  I've split up my FPM pools so that php will run under each individual user and set the routing correctly in my vhost.conf files to pass the proper port number. But I must have something incorrect in my environment because on this new domain I set up, require, require_once, include, include_once do not function, or rather, they may not be getting passed up to the interpreter to be rendered as php. Since I already have a Wordpress install on this server that runs perfectly, I'm pretty sure the error is in my server block for nginx. server { server_name www.domain.com; rewrite ^(.*) http://domain.com$1 permanent; } server { listen 80; server_name domain.com; client_max_body_size 500M; index index.php index.html index.htm; root /home/username/public_html; location / { try_files $uri $uri/ index.php; } location ~ \.php$ { if (!-e $request_filename) { rewrite ^(.*)$ /index.php?name=$1 break; } fastcgi_pass 127.0.0.1:9002; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } location ~ /\.ht { deny all; } } The problem I'm finding I think is that there are dynamic calls to the doc root index file, while all calls to anything within a sub-folder should be routed as normal ie: NOT passed to index.php. I can't seem to find the right mix here. It should run like so: domain.com/cindy (file doesn't exist) --> index.php?name=$1 domain.com/admin/anyfile.php (files DO exist) --> admin/anyfile.php?$args

  Read the article

• tab complete not working for vim in particular directory - ubuntu 12.04

  - by user1160958

  I am working on a ruby on rails app. All of the sudden the command line tab complete stopped working for vim, only for files though, and only for the vim command (i.e. works for other commands, ls, rm etc.) After further investigation - this only occurs in a specific directory, the home directory of my rails app. If I go into a sub directory in my rails app, or any other directory on my machine, the tab complete works again. If I go into the root directory of any other rails app, it works. I also tried renaming the diretory, and copying the contents of the directory to another directory, and that did not work either. It only does not work for files, and works for any other command - ls, rm etc. But when I do vim /path/to/file/, then tab to see a list of files in that directory, only other directories show, not files. I am using ubuntu 12.04. Also, I tried re-installing vim, re-booting, removing ~/.viminfo (there was no vimrc file) that didn't work. Any help would be appreciated!

  Read the article

• How do I change the Dropbox directory on a headless GNU/Linux server?

  - by DrTwox

  I have installed Dropbox 2.0.0 via command line on my home server (Ubuntu Server 12.04) to use for off-site automated backups, but I can't change the directory that the Dropbox daemon keeps synced. I've tried the following: The official docs say to use the desktop application, which is not applicable in my situation. However I installed the desktop app on my desktop machine and changed the default folder location, but I can't find where this change is stored in the ~/.dropbox/ directory so I can make the same change on the server. This page (and several others) recommends a Python script to do the job. Looking at the script, it opens a SQLite database called ~/.dropbox/dropbox.db, which does not exist on my Dropbox install, leading me to believe the script is out-of-date. This forum thread suggests manually inserting the required row in the config.db database, which I did, but it made no difference. I checked the same database file on my desktop machine, and it does not have the dropbox_path key, so I'm presuming the information in that thread is also out of date for version 2.0. I have tried to launch the Dropbox GUI configuration wizard over SSH with X11 forwarding, as suggested in one of the answers, but the binary must detect the absence of a local X11 install and it starts a command line daemon instead, which provides no means to change the option I need. I am currently using a symlink, as suggested as an answer, but this is a kludge. I would like to know the correct way to make the change. How do I change the Dropbox directory on a headless GNU/Linux server? Update: I've ditched Dropbox and started using Copy. Their Linux tools and support is far superior to Dropbox. I leave this question here in case someone, someday, can answer it.

  Read the article

• Small store infrastructure - where to begin?

  - by KevinM1

  It looks like my older brother is about to change jobs - from lawyer to shooting range proprietor - and since I'm the family 'computer guy' I have the task of coming up with and setting up the in-store equipment. Only problem, I don't know how to start or where to look. I'm a web programmer, not an IT specialist. To that end, I figured I should ask the pros. Users: 3 (myself, my brother, and his business partner) Equipment: 1 Windows (likely 7) desktop for POS software, 1 Windows desktop/laptop for backroom use (bookkeeping, etc.) Other: ?? I'm looking for a reliable and, well, idiot-proof way to handle backups. Neither my brother nor his business partner are tech savvy (A web browser, email, MS Word and Excel are about the extent of their knowledge), so I need something they can handle. On-site would be preferable to off-site, given my brother's hesitance to have sensitive business data be handled by an outside source. I'm also looking for a small on-site server. I estimate that, at most, only 2-3 users will need access. A linux solution would keep costs down, but I'm concerned about Windows <- linux interoperability. Would the store security cameras' storage be handled by the security company, or would we have to stream that data to our own server? I know from my own experience with personal security that the company gives/loans a recording device to the home owner, but I'm not sure about business security. I know this sounds like a shopping list, and it's pretty vague. I wish I could give more detail, but between my own ignorance and things not being 100% nailed down on the business end, I'm a bit stuck. At the very least I'd like a nudge - links on a place to start, what to look for, things I need to think about, etc. - for this endeavor. Thanks.

  Read the article

• Router drops internet connection if I connect an additional pc

  - by BluePerry

  Hey, I'm using a SMC2804WBRP-G router connected to my ADSL-modem. Usually there are two computers connected to this router: a win7 ultimate desktop(wired) and a macbook air (wireless). Both working absolutely fine and never caused any connection drops as far as I know. A new room mate moved in last month and each time she starts up her win7 home laptop the router looses the internet connection. The laptop is on a wired connection. The first time she connected to my router, the connection dropped every 2 mins. To find out whats wrong with her machine I disabled all unnecessary services etc. besides the anti virus software. That helped to eliminate almost all of those periodic connection drops. But the start up drop remained and I've got the feeling that the router is still loosing connection from time to time. I haven't had the time to find out what service caused the periodic drops. But I'm more concerned about is that start up drop. Can anyone point me in the right direction to look for the problem? I would be very thankful for any hints or tips!

  Read the article

• Shared configuration for Eclipse on Debian server

  - by Joris Meys

  I've manually installed the latest Eclipse on our debian server and wanted to configure it so all users share the same configuration. It turned out less obvious than I thought: I don't seem to be able to install packages for all users. If I run it myself, all configuration data is saved under my own home directory. If I run Eclipse using sudo, everything is saved under the root directory but is not accessible for other users when they run Eclipse. I've been browsing the manual of Eclipse and some forums, but apart from a "yes, you can" I couldn't find any information on how that should be done. The biggest problem is installing plugins for all users to be found. Any help is greatly appreciated. Eclipse : 3.6.1 classic, installed using this procedure. Server uname: GNU/Linux * 2.6.26-2-amd64 Server is accessed using Putty, and Gnome desktop through realVNC. Just mentioning it if that is of any importance. Our sysadmin is on "prolonged leave" (working in Spain and never replaced), so I'm stuck without help here. EDIT : -- I asked this question also on StackOverflow as I wasn't certain this is a genuine server-related question. Please feel free to merge both questions at the appropriate place. --

  Read the article

• Turning on Bluetooth disables wifi on Yoga 2

  - by Yostage

  I have a Lenovo Yoga 2. The moment that I turn on bluetooth, the wifi drops out - I lose connection, and connecting again shows "connection failed". If I turn the bluetooth off, wifi can reestablish fine. I've tried lots of different combinations of drivers for both the wifi and the bluetooth, but no combination has has changed this behavior yet. I've read some speculation that the cards have insufficient shielding, but that seems like kind of a large flaw to ship with. I've tried with a Carbon X1, a Yoga 2 Pro, and a Yoga 2 all next to each other on the desk while running InSSIDer. The X1 and the Y2P don't lose wifi connection when the bluetooth turns on, but the Y2 does immediately. The Y2P and the Y2 are running the same drivers for bluetooth and wifi, and appear to have the same wireless card internally. During the failure state, InSSIDer still sees signal strength for my network, but I cannot connect to it. stats: the card that comes in the laptop is an Intel Wireless-N 7260 Intel Bluetooth driver is at 17.0.1401.422 Intel Wireless driver is at 17.0.2.5 Windows 8.1 x64 Home wifi is a Medialink MWN-WAPR150N

  Read the article

• nfs mount with nfs 3

  - by rahrahruby

  I am running CentOS 6.4 Kernel version 2.6.32-358.23.2.el6.x86_64 #1 SMP and have the following nfs info: nfs-utils-lib-1.1.5-6.el6.x86_64 nfs4-acl-tools-0.3.3-6.el6.x86_64 nfs-utils-1.2.3-36.el6.x86_64 and am trying to mount an nfs volume with nfs3. I have the following line in my fstab: 172.16.11.87:/volume1/web /home/nas nfsver=3 rsize=8192,wsize=8192,timeo=14,intr(no_root_squach) When I run nfsstat it still shows the client as nfs4 Server rpc stats: calls badcalls badauth badclnt xdrcall 0 0 0 0 0 Client rpc stats: calls retrans authrefrsh 1988817 6 1988818 Client nfs v4: null read write commit open open_conf 0 0% 36943 1% 21606 1% 401 0% 392369 19% 375986 18% open_noat open_dgrd close setattr fsinfo renew 0 0% 0 0% 387945 19% 22904 1% 3 0% 2914 0% setclntid confirm lock lockt locku access 1 0% 1 0% 0 0% 0 0% 0 0% 97856 4% getattr lookup lookup_root remove rename link 613996 30% 29888 1% 1 0% 1248 0% 253 0% 414 0% symlink create pathconf statfs readlink readdir 26 0% 226 0% 2 0% 3 0% 0 0% 3825 0% server_caps delegreturn getacl setacl fs_locations rel_lkowner 5 0% 0 0% 0 0% 0 0% 0 0% 0 0% exchange_id create_ses destroy_ses sequence get_lease_t reclaim_comp 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% layoutget layoutcommit layoutreturn getdevlist getdevinfo ds_write 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% ds_commit 0 0%

  Read the article

• Laptop Most Likely to Have Good Driver Support

  - by ShabbyDoo

  Through numerous bad experiences, I have learned that the most likely cause of laptop "failure" is the lack of updated drivers for new operating systems. As an example, I have a perfectly good Thinkpad T42 at home which runs Windows 7 just fine for my purposes except that no compatible ATI video drivers are available, and the generic drivers have flicker effects. I recently saw an ASUS laptop which looked quite nice except that I would be beholden to them to release ATI video driver updates customized for it. And, I can't trust them to do that for more than six months. What laptops (manufacturer/line) should I consider so that I could expect at least a couple years of frequent updates? I plan on running Windows 7 and installing whatever successor comes out. I like Intel components (especially WiFi) because I can install their drivers directly from them, and they have a long history of providing updates for years after shipping a particular component. More generally, components from companies which are likely to update drivers frequently are good as long as I can install the component manufacturer-provided drivers without laptop-specific customization (like the ATI drivers). Also, if a component can be replaced easily, I am less concerned. For example, Dell stopped pumping out updated drivers for one of its mini-PCI WiFi cards. The solution was to buy an Intel replacement on eBay for $12! That's fine. I can deal with that. So, what laptops should I consider so that I'm not likely to be stuck between a rock and a hard place?

  Read the article

• SharePoint 2010 Enterprise wiki - [New page] missing

  - by icelava

  I am trying to ramp up knowledge on SharePoint deployment and usage (never did before), due to a direction to use SharePoint 2010 as a repository platform (wiki format) for our customer's infrastructure documentation. In my test virtual server, a new site of Enterprise wiki template was setup. Went into Site Actions Manage Site Features to activate Wiki Page Home Page. The default sub-web then went from /Pages to /SitePages and looks like the default Team template. The odd thing is the Site Actions is missing the New Page option. My colleague does not understand why this is the case, as it ought to be there. The original /Pages sub-web does have the option. What conditions are in play that influences the appearance of that option? UPDATE Another phenomenon observed is in the Site Actions View All Site Content view, the wiki document libraries listed in the grid will have their hyperlink (e.g. "Site Pages") lead straight to the direct default page. It would not show its own table listing of pages under that document library, unlike the original Pages document library, which expectedly show up as a listing. I wonder if this hints to any problems.

  Read the article

• Is this "cache administrator" error my server's problem?

  - by Eoin

  Hey, I have a CentOS VPS running Apache with a phpBB installation. One specific user has received errors when posting a message or logging in to the forum. The following issue has arisen in parallel to installing nginx, which serves only the static files of my site. Not sure if this is only coincidence. Furthermore, my setup uses redirects (in some cases, double-redirects) to point the user to a different virtual folder. So, the forum is seen to be at /translation/ but the actual files are found in /phpbb/. I'm at a loss as to what may be the underlying issue. My server? The person's ISP? She has tested both at home and at work, with similar issues. While trying to process the request: GET /phpbb/index.php?sid=f62c927e7eb8f1d60a92dcc6fd918112 HTTP/1.1 Host: www.irishgaelictranslator.com User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.2.13) Gecko/20101203 Firefox/3.6.13 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-za Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive Referer: http://www.irishgaelictranslator.com/phpbb/ucp.php?mode=login Cookie: phpbb3_cipi4_u=96645; phpbb3_cipi4_k=; phpbb3_cipi4_sid=f62c927e7eb8f1d60a92dcc6fd918112; __utma=153470688.1232378553.1294664234.1294664234.1294664234.1; __utmb=153470688.9.10.1294664234; __utmc=153470688; __utmz=153470688.1294664235.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none); style_cookie=null The following error was encountered: Invalid Response The HTTP Response message received from the contacted server could not be understood or was otherwise malformed. Please contact the site operator. Your cache administrator may be able to provide you with more details about the exact nature of the problem if needed.

  Read the article

• What is the main reason of adsl modem/routers dying ?

  - by ldigas

  The other day my home adsl modem/router (dwg 684t in this case) died. A guy from the telecom company came, brought another so no problem in day to day operation, but he also left this one. Now, I'm interested ... it didn't fall, it wasn't electrocuted ... but it just doesn't work. What could be the problem ? Can they be fixed ? Is it worth it (in which case I would have two which is always nice) ... What are the usual problems that occur with them ? In this case, I can connect to the router, I can see its settings, I just can't connect to the internet. With the new one everything works. Weird. Edit: Additional question: Can those things be fixed ? I mean, is it worth giving it to a local tinker for him to experiment on it ? I'm not looking for a definite opinion, just your personal advice ... (although in the end I think I'm gonna archive it in the "cylinder register")

  Read the article

• Any program to help me check whether an ethernet channel can support full-length VLAN packet?

  - by Jimm Chen

  Sometimes, I have to face such a situation that I need to quickly and explicitly know whether a full length VLAN packet can traverse between two RJ45 ports. Yes, I mean 802.1Q ethernet frame with Etype=81 00 (diagram below). What I can do now is: Get two Windows PCs, for each PC, intall Intel Gigabit NIC and Intel specific driver to create a virtual NIC, with VLAN ID=3 assigned. Then connect the two PCs to each of the two RJ45 port. Finally execute ping to generate a full-length ethernet packet. ping -f -l 1472 <dest-IP> This way, I can be sure that the sent packet has the maximum "IP data payload" of 1500 bytes(8 bytes of ICMP header and 1472 bytes of ICMP data). If the ping gets reply, I know that the ethernet channel support full-length VLAN packet. From my experiment, some home switch or broad band routers(e.g. Linksys WRT54G) does not support full-length VLAN packet switching, so only ping -f -l 1468 succeeds. You see, I have to use an expensive Intel NIC to carry on that test, quite inconvenient. You know, for most laptop today, they do not equip an Intel NIC, and, even it is an Intel NIC, Intel VLAN driver, Intel has limitations on the models on which VLAN driver can be installed. So, my question is: Is there a small program that can let me send a full-length VLAN packet without installing a dedicated VLAN driver? Or better, the program has a stock feature that does the very job for my situation. Windows programs preferred, Linux solution welcome. Simpler the program, the better. Thank you.

  Read the article

• Windows 7 hangs after going into sleep a second time

  - by Brian Stephenson

  I've searched everywhere around Google and can't figure out why this is happening so I decide to ask here to see if anyone has a problem like this. Like it says in the title, whenever I sleep ONCE I'm able to wake the system, but going back to sleep again AFTER waking up for the first time results in it hanging on no input and no output, with the fan spinning as fast as possible and alot of heat being spewed out by the fan as well. I've tried various things like setting all USB Hub Root's to not get switched off for power saving, disabling USB selective suspend, disabling PCI-e link state power management, and even unplugging ALL USB devices and it wont wake up after the second attempt. And I've even waited up to a full hour of the CPU fan spinning loudly and it's still stuck trying to wake up. The only USB devices I use are a Microsoft USB Comfort Curve Keyboard 2000 (IntelliType Pro) and a generic HID compliant mouse from Creative model number OMC90S "CREATIVE MOUSE OPTICAL LITE". My other devices like external drives and controllers are unplugged when I'm not using them as having too many USB devices plugged in at a time causes a deadlock on almost all of the ports I have. Here's my system specifications (Most of these are from CPU-Z): Brand: Gateway DX4300-19 Mainboard: Gateway RS780 Chipset: AMD 780G Rev 00 Southbridge: AMD SB700 Rev 00 LPCIO: ITE IT8718 BIOS: American Megatrends Inc. ver P01-A4 09/15/2009 CPU: AMD Phenom II X4 810 at 2.60 GHz RAM: 8.0 GB DDR2 Dual Channel Ganged Mode at 400 MHz GPU: ATI Radeon HD3200 Graphics Intergrated - RS780 OS: Windows 7 Home Premium x64 OEM (Acer Group) HDD: WDC WD10EADS-22M2B0 1.0 TB (Western Digital Green Caviar) My BIOS has absolutely no control over how I setup the sleep mode to be either S1 or S3. So I can't check these settings or even change them. Hybrid sleep is also disabled, I can successfully go into hibernation and wake from hibernation but this is painfully slow due to a harddrive problem I'm having with this "Green Drive". (Hibernation takes over ~3 minutes to complete) Any help would be appreciated, thanks.

  Read the article

• Windows 7 boots to black screen with blinking cursor

  - by murgatroid99

  I have an Alienware M17x that dual boots into Ubuntu 11.04 and Windows 7 Home Premium. Currently, the computer starts at the GRUB loader and will boot into Ubuntu, but if I try to boot into Windows, I immediately get a black screen with a blinking cursor in the upper left corner. The output of fdisk -l is Device Boot Start End Blocks Id System /dev/dm-0p1 1 5 40131 de Dell Utility Partition 1 does not start on physical sector boundary. /dev/dm-0p2 6 1918 15360000 7 HPFS/NTFS Partition 2 does not start on physical sector boundary. /dev/dm-0p3 * 1918 64772 504878877+ 7 HPFS/NTFS Partition 3 does not start on physical sector boundary. /dev/dm-0p4 64772 77827 104858625 5 Extended Partition 4 does not start on physical sector boundary. /dev/dm-0p5 64772 67204 19531008 83 Linux /dev/dm-0p6 67204 74498 58593536 83 Linux /dev/dm-0p7 74498 77577 24731648 83 Linux /dev/dm-0p8 77578 77827 2000128 82 Linux swap / Solaris I have used the Windows rescue CD, and run the automatic error fixer until it finds no errors. I have run chkdsk /R on both the main Windows 7 (/dev/dm-0p3) partition and the recovery partition (/dev/dm-0p2). I set the main Windows 7 partition to be active. I also tried running in the recovery console the commands bootrec /fixmbr bootrec /fixboot bootrec /rebuildbcd None of these helped and the last set of commands deletes grub, which I then have to reinstall from Ubuntu. I think the last thing I did in windows before this started was install the newest ATI driver for my video card. This would suggest using system restore, and I actually had a restore point earlier (after the problem started), but after whatever I did that restore point does not appear in the list on the recovery disk any more, so I cannot do a system restore. Is there anything else I can try to make Windows boot properly again? Edit: Running the suggested commands bootsect /nt60 c: bcdboot c:\windows /s c: was also ineffective.

  Read the article

• Tomato/DD-WRT router to act as switch & only NAT some port

  - by fseto

  BACKGROUND: I have a device that must use a real IP address. Currently, my ISP uses DHCP and I can have up to 4 real IP address assigned. However, the cable modem only have 1 ethernet port and it's connected to my router (running Tomato, but can run DD-wrt or other Openwrt if required). Question stems from how I can connect the additional device, requiring a real IP? EASY SOLUTION: would be to get a switch and connect to the CM, Router, and Device. But alas, I want to avoid this route, since: my wiring cabinet in my home is drawing lots of power and heat already Device will be unprotected by any firewall unable to monitor the traffic to/from device. Besides, what would be the FUN in that? =) IDEA: So what I want to do is to configure the router, so that one of the switchport is removed from the normal br0 bridge. Instead, I want to make it behave like a switch on the WAN port. What's the best way of doing this? Should I create another bridge on the WAN & the device port? Can a single port belongs to two bridges? or would I need to create a subinterface first? Would I need a DHCP-relay? Am I expecting too much from my poor cheapie router? +------+ | CM | +--++--+ || +----WAN---------------+ | / \ Router | | BR1? BR0 | | | \ | | | {NAT} | | | / | | \ | +-P0----P1-P2-P3-Wifi--+ | +------+ |Device| +------+

  Read the article

• How to get rid of Windows XP Pro Blue pop up screen

  - by LISA

  Windows XP user-home edition 36 bit. One day I woke to see a blue pop up screen from Microsoft Windows XP Pro. I have not installed anything new myself. The 'add on' pop up always comes on when I open up mozilla to surf the net. I always just close it out to not install anything. I then woke to have colored tabs, the new download status bar at the bottom and this pop up window that asks me to retype two words spaced, a timer of two minutes starts and states if no word put in system will shut off. I have let it run down more than a few times and it does not shut down. No other options to choose from. If I misspell with a lot of letters it tells me I did so, but if I can't read a few letters I guess at it although it is not and it lets me resume what I am doing. This window pops up every single minute no matter what I am doing. Please help, I'm really annoyed with this. I have searched the net all over and don't quit know what to look for anymore

  Read the article

• Apache Probes -- what are they after?

  - by Chris_K

  The past few weeks I've been seeing more and more of these probes each day. I'd like to figure out what vulnerability they're looking for but haven't been able to turn anything up with a web search. Here's a sample of what I get in my morning Logwatch emails: A total of XX possible successful probes were detected (the following URLs contain strings that match one or more of a listing of strings that indicate a possible exploit): /MyBlog/?option=com_myblog&Itemid=12&task=../../../../../../../../../../../../../../../proc/self/environ%00 HTTP Response 200 /index2.php?option=com_myblog&item=12&task=../../../../../../../../../../../../../../../../proc/self/environ%00 HTTP Response 200 /?option=com_myblog&Itemid=12&task=../../../../../../../../../../../../../../../proc/self/environ%00 HTTP Response 301 /index2.php?option=com_myblog&item=12&task=../../../../../../../../../../../../../../../proc/self/environ%00 HTTP Response 200 //index2.php?option=com_myblog&Itemid=1&task=../../../../../../../../../../../../../../../proc/self/environ%00 HTTP Response 200 This is coming from a current CentOS 5.4 / Apache 2 box with all updates. I've manually tried entering a few in to see what they get, but those all appear to just return the site's home page. This server is just hosting a few Joomla! sites... but this doesn't seem to be targeting Joomla (as far as I can tell). Anyone know what they're probing for? I just want to make sure whatever it is I've got it covered (or not installed). The escalation of these entries has me a bit concerned.

  Read the article

• Disable RAID to JBOD in server IBM x3400 M2

  - by BanKtsu

  Hi I just wanna disable the default RAID in my server IBM System X3400 M2 Server(7837-24X),i have 3 disk drives SAS. I want to make them a JBOD "Just a Bunch Of Disks", because I want to install in the drive 0 CentOS, and the other two make them cache files for a squid server. I disable the RAID in the BIOS: System Settings/Adapters and UEFI drivers/LSI Logic Fusion MPT SAS Driver -PciRoot(0x0)/Pci(0x3,0X0)/Pci(0x0,0x0) LSI Logic MPT Setup Utility RAID Properties/Delete Array Later I boot the CentOS live CD and install the OS in the drive 0, and the others 2 mounted like this: *LVM Volume Groups vg_proxyserver 139508 lv_root 51200 / ext4 lv_home 84276 /home ext4 lv_swap 4032 Hard Drive sdb(/dev/sdb) free 140011 sdc(/dev/sdc) free 140011 sdd(/dev/sdd) sdd1 500 /boot ext4 sdd2 139512 vg_proxyserver physical volume(LVM) But when I restart the server give me the error: Boot failed Hard Disk 0 UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15130,0X0)) ........PXE-E18:Server response timeout. UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15132,0X0)) ........PXE-E18:Server response timeout. and the OS not start. The IBM force me to do a RAID?,why?

  Read the article

• What is the quickest and safest way to test new software and revert all changes, if needed?

  - by calbar

  I'm looking for Windows software that will allow me to quickly create a "checkpoint", do whatever I might need to do to my computer - install programs/drivers/updates, create/delete personal files, reboot the system multiple times, open questionable attachments - and then revert the entire system back to when the checkpoint was created. Essentially I want Windows Restore Points that save my personal files and partitions, too. It sounds like disk imaging might be the ticket, but creating them is much too slow and the restore process too involved... I'm hoping to sacrifice full disaster recovery for speed. Creating a checkpoint should be as close to one-click as possible, and rolling back should be a matter of selecting a restore point and rebooting. Ding! I'm familiar with Sandboxie, True Image Home "Try and Decide", Returnil, and a number of other "virtual system" apps that actively "catch" changes and allow you to commit or reject them. I'm not interested in these for a number of reasons - I prefer the "cut and dry" restore point approach. Finally, I'll note that I've just recently become aware of Comodo Time Machine. It sounds absolutely perfect, however, a quick skim through the user forums show more than a few horror stories of corrupted, unbootable systems. Any positive personal experience with the software to suppress my superstitions, or suggestions for more established alternatives would be greatly appreciated - Comodo Time Machine seems relatively new. Thanks for your help!

  Read the article

< Previous Page | 473 474 475 476 477 478 479 480 481 482 483 484  | Next Page >