Search Results

Search found 12705 results on 509 pages for 'random sample'.

Page 478/509 | < Previous Page | 474 475 476 477 478 479 480 481 482 483 484 485  | Next Page >

• Combination of Operating Mode and Commit Strategy

  - by Kevin Yang

  If you want to populate a source into multiple targets, you may also want to ensure that every row from the source affects all targets uniformly (or separately). Let’s consider the Example Mapping below. If a row from SOURCE causes different changes in multiple targets (TARGET_1, TARGET_2 and TARGET_3), for example, it can be successfully inserted into TARGET_1 and TARGET_3, but failed to be inserted into TARGET_2, and the current Mapping Property TLO (target load order) is “TARGET_1 -> TARGET_2 -> TARGET_3”. What should Oracle Warehouse Builder do, in order to commit the appropriate data to all affected targets at the same time? If it doesn’t behave as you intended, the data could become inaccurate and possibly unusable.                                               Example Mapping In OWB, we can use Mapping Configuration Commit Strategies and Operating Modes together to achieve this kind of requirements. Below we will explore the combination of these two features and how they affect the results in the target tables Before going to the example, let’s review some of the terms we will be using (Details can be found in white paper Oracle® Warehouse Builder Data Modeling, ETL, and Data Quality Guide11g Release 2): Operating Modes: Set-Based Mode: Warehouse Builder generates a single SQL statement that processes all data and performs all operations. Row-Based Mode: Warehouse Builder generates statements that process data row by row. The select statement is in a SQL cursor. All subsequent statements are PL/SQL. Row-Based (Target Only) Mode: Warehouse Builder generates a cursor select statement and attempts to include as many operations as possible in the cursor. For each target, Warehouse Builder inserts each row into the target separately. Commit Strategies: Automatic: Warehouse Builder loads and then automatically commits data based on the mapping design. If the mapping has multiple targets, Warehouse Builder commits and rolls back each target separately and independently of other targets. Use the automatic commit when the consequences of multiple targets being loaded unequally are not great or are irrelevant. Automatic correlated: It is a specialized type of automatic commit that applies to PL/SQL mappings with multiple targets only. Warehouse Builder considers all targets collectively and commits or rolls back data uniformly across all targets. Use the correlated commit when it is important to ensure that every row in the source affects all affected targets uniformly. Manual: select manual commit control for PL/SQL mappings when you want to interject complex business logic, perform validations, or run other mappings before committing data. Combination of the commit strategy and operating mode To understand the effects of each combination of operating mode and commit strategy, I’ll illustrate using the following example Mapping. Firstly we insert 100 rows into the SOURCE table and make sure that the 99th row and 100th row have the same ID value. And then we create a unique key constraint on ID column for TARGET_2 table. So while running the example mapping, OWB tries to load all 100 rows to each of the targets. But the mapping should fail to load the 100th row to TARGET_2, because it will violate the unique key constraint of table TARGET_2. With different combinations of Commit Strategy and Operating Mode, here are the results ¦ Set-based/ Correlated Commit: Configuration of Example mapping:                                                     Result:                                                      What’s happening: A single error anywhere in the mapping triggers the rollback of all data. OWB encounters the error inserting into Target_2, it reports an error for the table and does not load the row. OWB rolls back all the rows inserted into Target_1 and does not attempt to load rows to Target_3. No rows are added to any of the target tables. ¦ Row-based/ Correlated Commit: Configuration of Example mapping:                                                   Result:                                                  What’s happening: OWB evaluates each row separately and loads it to all three targets. Loading continues in this way until OWB encounters an error loading row 100th to Target_2. OWB reports the error and does not load the row. It rolls back the row 100th previously inserted into Target_1 and does not attempt to load row 100 to Target_3. Then, if there are remaining rows, OWB will continue loading them, resuming with loading rows to Target_1. The mapping completes with 99 rows inserted into each target. ¦ Set-based/ Automatic Commit: Configuration of Example mapping: Result: What’s happening: When OWB encounters the error inserting into Target_2, it does not load any rows and reports an error for the table. It does, however, continue to insert rows into Target_3 and does not roll back the rows previously inserted into Target_1. The mapping completes with one error message for Target_2, no rows inserted into Target_2, and 100 rows inserted into Target_1 and Target_3 separately. ¦ Row-based/Automatic Commit: Configuration of Example mapping: Result: What’s happening: OWB evaluates each row separately for loading into the targets. Loading continues in this way until OWB encounters an error loading row 100 to Target_2 and reports the error. OWB does not roll back row 100th from Target_1, does insert it into Target_3. If there are remaining rows, it will continue to load them. The mapping completes with 99 rows inserted into Target_2 and 100 rows inserted into each of the other targets. Note: Automatic Correlated commit is not applicable for row-based (target only). If you design a mapping with the row-based (target only) and correlated commit combination, OWB runs the mapping but does not perform the correlated commit. In set-based mode, correlated commit may impact the size of your rollback segments. Space for rollback segments may be a concern when you merge data (insert/update or update/insert). Correlated commit operates transparently with PL/SQL bulk processing code. The correlated commit strategy is not available for mappings run in any mode that are configured for Partition Exchange Loading or that include a Queue, Match Merge, or Table Function operator. If you want to practice in your own environment, you can follow the steps: 1. Import the MDL file: commit_operating_mode.mdl 2. Fix the location for oracle module ORCL and deploy all tables under it. 3. Insert sample records into SOURCE table, using below plsql code: begin     for i in 1..99     loop         insert into source values(i, 'col_'||i);     end loop;     insert into source values(99, 'col_99'); end; 4. Configure MAPPING_1 to any combinations of operating mode and commit strategy you want to test. And make sure feature TLO of mapping is open. 5. Deploy Mapping “MAPPING_1”. 6. Run the mapping and check the result.

  Read the article

• Accessing SharePoint 2010 Data with REST/OData on Windows Phone 7

  - by Jan Tielens

  Consuming SharePoint 2010 data in Windows Phone 7 applications using the CTP version of the developer tools is quite a challenge. The issue is that the SharePoint 2010 data is not anonymously available; users need to authenticate to be able to access the data. When I first tried to access SharePoint 2010 data from my first Hello-World-type Windows Phone 7 application I thought “Hey, this should be easy!” because Windows Phone 7 development based on Silverlight and SharePoint 2010 has a Client Object Model for Silverlight. Unfortunately you can’t use the Client Object Model of SharePoint 2010 on the Windows Phone platform; there’s a reference to an assembly that’s not available (System.Windows.Browser). My second thought was “OK, no problem!” because SharePoint 2010 also exposes a REST/OData API to access SharePoint data. Using the REST API in SharePoint 2010 is as easy as making a web request for a URL (in which you specify the data you’d like to retrieve), e.g. http://yoursiteurl/_vti_bin/listdata.svc/Announcements. This is very easy to accomplish in a Silverlight application that’s running in the context of a page in a SharePoint site, because the credentials of the currently logged on user are automatically picked up and passed to the WCF service. But a Windows Phone application is of course running outside of the SharePoint site’s page, so the application should build credentials that have to be passed to SharePoint’s WCF service. This turns out to be a small challenge in Silverlight 3, the WebClient doesn’t support authentication; there is a Credentials property but when you set it and make the request you get a NotImplementedException exception. Probably this issued will be solved in the very near future, since Silverlight 4 does support authentication, and there’s already a WCF Data Services download that uses this new platform feature of Silverlight 4. So when Windows Phone platform switches to Silverlight 4, you can just use the WebClient to get the data. Even more, if the OData Client Library for Windows Phone 7 gets updated after that, things should get even easier! By the way: the things I’m writing in this paragraph are just assumptions that I make which make a lot of sense IMHO, I don’t have any info all of this will happen, but I really hope so. So are SharePoint developers out of the Windows Phone development game until they get this fixed? Well luckily not, when the HttpWebRequest class is being used instead, you can pass credentials! Using the HttpWebRequest class is slightly more complex than using the WebClient class, but the end result is that you have access to your precious SharePoint 2010 data. The following code snippet is getting all the announcements of an Annoucements list in a SharePoint site: HttpWebRequest webReq =     (HttpWebRequest)HttpWebRequest.Create("http://yoursite/_vti_bin/listdata.svc/Announcements");webReq.Credentials = new NetworkCredential("username", "password"); webReq.BeginGetResponse(    (result) => {        HttpWebRequest asyncReq = (HttpWebRequest)result.AsyncState;         XDocument xdoc = XDocument.Load(            ((HttpWebResponse)asyncReq.EndGetResponse(result)).GetResponseStream());         XNamespace ns = "http://www.w3.org/2005/Atom";        var items = from item in xdoc.Root.Elements(ns + "entry")                    select new { Title = item.Element(ns + "title").Value };         this.Dispatcher.BeginInvoke(() =>        {            foreach (var item in items)                MessageBox.Show(item.Title);        });    }, webReq); When you try this in a Windows Phone 7 application, make sure you add a reference to the System.Xml.Linq assembly, because the code uses Linq to XML to parse the resulting Atom feed, so the Title of every announcement is being displayed in a MessageBox. Check out my previous post if you’d like to see a more polished sample Windows Phone 7 application that displays SharePoint 2010 data.When you plan to use this technique, it’s of course a good idea to encapsulate the code doing the request, so it becomes really easy to get the data that you need. In the following code snippet you can find the GetAtomFeed method that gets the contents of any Atom feed, even if you need to authenticate to get access to the feed. delegate void GetAtomFeedCallback(Stream responseStream); public MainPage(){    InitializeComponent();     SupportedOrientations = SupportedPageOrientation.Portrait |         SupportedPageOrientation.Landscape;     string url = "http://yoursite/_vti_bin/listdata.svc/Announcements";    string username = "username";    string password = "password";    string domain = "";     GetAtomFeed(url, username, password, domain, (s) =>    {        XNamespace ns = "http://www.w3.org/2005/Atom";        XDocument xdoc = XDocument.Load(s);         var items = from item in xdoc.Root.Elements(ns + "entry")                    select new { Title = item.Element(ns + "title").Value };         this.Dispatcher.BeginInvoke(() =>        {            foreach (var item in items)            {                MessageBox.Show(item.Title);            }        });    });} private static void GetAtomFeed(string url, string username,     string password, string domain, GetAtomFeedCallback cb){    HttpWebRequest webReq = (HttpWebRequest)HttpWebRequest.Create(url);    webReq.Credentials = new NetworkCredential(username, password, domain);     webReq.BeginGetResponse(        (result) =>        {            HttpWebRequest asyncReq = (HttpWebRequest)result.AsyncState;            HttpWebResponse resp = (HttpWebResponse)asyncReq.EndGetResponse(result);            cb(resp.GetResponseStream());        }, webReq);}

  Read the article

• C#: Does an IDisposable in a Halted Iterator Dispose?

  - by James Michael Hare

  If that sounds confusing, let me give you an example. Let's say you expose a method to read a database of products, and instead of returning a List<Product> you return an IEnumerable<Product> in iterator form (yield return). This accomplishes several good things: The IDataReader is not passed out of the Data Access Layer which prevents abstraction leak and resource leak potentials. You don't need to construct a full List<Product> in memory (which could be very big) if you just want to forward iterate once. If you only want to consume up to a certain point in the list, you won't incur the database cost of looking up the other items. This could give us an example like: 1: // a sample data access object class to do standard CRUD operations. 2: public class ProductDao 3: { 4: private DbProviderFactory _factory = SqlClientFactory.Instance 5:  6: // a method that would retrieve all available products 7: public IEnumerable<Product> GetAvailableProducts() 8: { 9: // must create the connection 10: using (var con = _factory.CreateConnection()) 11: { 12: con.ConnectionString = _productsConnectionString; 13: con.Open(); 14:  15: // create the command 16: using (var cmd = _factory.CreateCommand()) 17: { 18: cmd.Connection = con; 19: cmd.CommandText = _getAllProductsStoredProc; 20: cmd.CommandType = CommandType.StoredProcedure; 21:  22: // get a reader and pass back all results 23: using (var reader = cmd.ExecuteReader()) 24: { 25: while(reader.Read()) 26: { 27: yield return new Product 28: { 29: Name = reader["product_name"].ToString(), 30: ... 31: }; 32: } 33: } 34: } 35: } 36: } 37: } The database details themselves are irrelevant. I will say, though, that I'm a big fan of using the System.Data.Common classes instead of your provider specific counterparts directly (SqlCommand, OracleCommand, etc). This lets you mock your data sources easily in unit testing and also allows you to swap out your provider in one line of code. In fact, one of the shared components I'm most proud of implementing was our group's DatabaseUtility library that simplifies all the database access above into one line of code in a thread-safe and provider-neutral way. I went with my own flavor instead of the EL due to the fact I didn't want to force internal company consumers to use the EL if they didn't want to, and it made it easy to allow them to mock their database for unit testing by providing a MockCommand, MockConnection, etc that followed the System.Data.Common model. One of these days I'll blog on that if anyone's interested. Regardless, you often have situations like the above where you are consuming and iterating through a resource that must be closed once you are finished iterating. For the reasons stated above, I didn't want to return IDataReader (that would force them to remember to Dispose it), and I didn't want to return List<Product> (that would force them to hold all products in memory) -- but the first time I wrote this, I was worried. What if you never consume the last item and exit the loop? Are the reader, command, and connection all disposed correctly? Of course, I was 99.999999% sure the creators of C# had already thought of this and taken care of it, but inspection in Reflector was difficult due to the nature of the state machines yield return generates, so I decided to try a quick example program to verify whether or not Dispose() will be called when an iterator is broken from outside the iterator itself -- i.e. before the iterator reports there are no more items. So I wrote a quick Sequencer class with a Dispose() method and an iterator for it. Yes, it is COMPLETELY contrived: 1: // A disposable sequence of int -- yes this is completely contrived... 2: internal class Sequencer : IDisposable 3: { 4: private int _i = 0; 5: private readonly object _mutex = new object(); 6:  7: // Constructs an int sequence. 8: public Sequencer(int start) 9: { 10: _i = start; 11: } 12:  13: // Gets the next integer 14: public int GetNext() 15: { 16: lock (_mutex) 17: { 18: return _i++; 19: } 20: } 21:  22: // Dispose the sequence of integers. 23: public void Dispose() 24: { 25: // force output immediately (flush the buffer) 26: Console.WriteLine("Disposed with last sequence number of {0}!", _i); 27: Console.Out.Flush(); 28: } 29: } And then I created a generator (infinite-loop iterator) that did the using block for auto-Disposal: 1: // simply defines an extension method off of an int to start a sequence 2: public static class SequencerExtensions 3: { 4: // generates an infinite sequence starting at the specified number 5: public static IEnumerable<int> GetSequence(this int starter) 6: { 7: // note the using here, will call Dispose() when block terminated. 8: using (var seq = new Sequencer(starter)) 9: { 10: // infinite loop on this generator, means must be bounded by caller! 11: while(true) 12: { 13: yield return seq.GetNext(); 14: } 15: } 16: } 17: } This is really the same conundrum as the database problem originally posed. Here we are using iteration (yield return) over a large collection (infinite sequence of integers). If we cut the sequence short by breaking iteration, will that using block exit and hence, Dispose be called? Well, let's see: 1: // The test program class 2: public class IteratorTest 3: { 4: // The main test method. 5: public static void Main() 6: { 7: Console.WriteLine("Going to consume 10 of infinite items"); 8: Console.Out.Flush(); 9:  10: foreach(var i in 0.GetSequence()) 11: { 12: // could use TakeWhile, but wanted to output right at break... 13: if(i >= 10) 14: { 15: Console.WriteLine("Breaking now!"); 16: Console.Out.Flush(); 17: break; 18: } 19:  20: Console.WriteLine(i); 21: Console.Out.Flush(); 22: } 23:  24: Console.WriteLine("Done with loop."); 25: Console.Out.Flush(); 26: } 27: } So, what do we see? Do we see the "Disposed" message from our dispose, or did the Dispose get skipped because from an "eyeball" perspective we should be locked in that infinite generator loop? Here's the results: 1: Going to consume 10 of infinite items 2: 0 3: 1 4: 2 5: 3 6: 4 7: 5 8: 6 9: 7 10: 8 11: 9 12: Breaking now! 13: Disposed with last sequence number of 11! 14: Done with loop. Yes indeed, when we break the loop, the state machine that C# generates for yield iterate exits the iteration through the using blocks and auto-disposes the IDisposable correctly. I must admit, though, the first time I wrote one, I began to wonder and that led to this test. If you've never seen iterators before (I wrote a previous entry here) the infinite loop may throw you, but you have to keep in mind it is not a linear piece of code, that every time you hit a "yield return" it cedes control back to the state machine generated for the iterator. And this state machine, I'm happy to say, is smart enough to clean up the using blocks correctly. I suspected those wily guys and gals at Microsoft engineered it well, and I wasn't disappointed. But, I've been bitten by assumptions before, so it's good to test and see. Yes, maybe you knew it would or figured it would, but isn't it nice to know? And as those campy 80s G.I. Joe cartoon public service reminders always taught us, "Knowing is half the battle...". Technorati Tags: C#,.NET

  Read the article

• IntelliSense for Razor Hosting in non-Web Applications

  - by Rick Strahl

  When I posted my Razor Hosting article a couple of weeks ago I got a number of questions on how to get IntelliSense to work inside of Visual Studio while editing your templates. The answer to this question is mainly dependent on how Visual Studio recognizes assemblies, so a little background is required. If you open a template just on its own as a standalone file by clicking on it say in Explorer, Visual Studio will open up with the template in the editor, but you won’t get any IntelliSense on any of your related assemblies that you might be using by default. It’ll give Intellisense on base System namespace, but not on your imported assembly types. This makes sense: Visual Studio has no idea what the assembly associations for the single file are. There are two options available to you to make IntelliSense work for templates: Add the templates as included files to your non-Web project Add a BIN folder to your template’s folder and add all assemblies required there Including Templates in your Host Project By including templates into your Razor hosting project, Visual Studio will pick up the project’s assembly references and make IntelliSense available for any of the custom types in your project and on your templates. To see this work I moved the \Templates folder from the samples from the Debug\Bin folder into the project root and included the templates in the WinForm sample project. Here’s what this looks like in Visual Studio after the templates have been included:   Notice that I take my original example and type cast the Context object to the specific type that it actually represents – namely CustomContext – by using a simple code block: @{ CustomContext Model = Context as CustomContext; } After that assignment my Model local variable is in scope and IntelliSense works as expected. Note that you also will need to add any namespaces with the using command in this case: @using RazorHostingWinForm which has to be defined at the very top of a Razor document. BTW, while you can only pass in a single Context 'parameter’ to the template with the default template I’ve provided realize that you can also assign a complex object to Context. For example you could have a container object that references a variety of other objects which you can then cast to the appropriate types as needed: @{ ContextContainer container = Context as ContextContainer; CustomContext Model = container.Model; CustomDAO DAO = container.DAO; } and so forth. IntelliSense for your Custom Template Notice also that you can get IntelliSense for the top level template by specifying an inherits tag at the top of the document: @inherits RazorHosting.RazorTemplateFolderHost By specifying the above you can then get IntelliSense on your base template’s properties. For example, in my base template there are Request and Response objects. This is very useful especially if you end up creating custom templates that include your custom business objects as you can get effectively see full IntelliSense from the ‘page’ level down. For Html Help Builder for example, I’d have a Help object on the page and assuming I have the references available I can see all the way into that Help object without even having to do anything fancy. Note that the @inherits key is a GREAT and easy way to override the base template you normally specify as the default template. It allows you to create a custom template and as long as it inherits from the base template it’ll work properly. Since the last post I’ve also made some changes in the base template that allow hooking up some simple initialization logic so it gets much more easy to create custom templates and hook up custom objects with an IntializeTemplate() hook function that gets called with the Context and a Configuration object. These objects are objects you can pass in at runtime from your host application and then assign to custom properties on your template. For example the default implementation for RazorTemplateFolderHost does this: public override void InitializeTemplate(object context, object configurationData) { // Pick up configuration data and stuff into Request object RazorFolderHostTemplateConfiguration config = configurationData as RazorFolderHostTemplateConfiguration; this.Request.TemplatePath = config.TemplatePath; this.Request.TemplateRelativePath = config.TemplateRelativePath; // Just use the entire ConfigData as the model, but in theory // configData could contain many objects or values to set on // template properties this.Model = config.ConfigData as TModel; } to set up a strongly typed Model and the Request object. You can do much more complex hookups here of course and create complex base template pages that contain all the objects that you need in your code with strong typing. Adding a Bin folder to your Template’s Root Path Including templates in your host project works if you own the project and you’re the only one modifying the templates. However, if you are distributing the Razor engine as a templating/scripting solution as part of your application or development tool the original project is likely not available and so that approach is not practical. Another option you have is to add a Bin folder and add all the related assemblies into it. You can also add a Web.Config file with assembly references for any GAC’d assembly references that need to be associated with the templates. Between the web.config and bin folder Visual Studio can figure out how to provide IntelliSense. The Bin folder should contain: The RazorHosting.dll Your host project’s EXE or DLL – renamed to .dll if it’s an .exe Any external (bin folder) dependent assemblies Note that you most likely also want a reference to the host project if it contains references that are going to be used in templates. Visual Studio doesn’t recognize an EXE reference so you have to rename the EXE to DLL to make it work. Apparently the binary signature of EXE and DLL files are identical and it just works – learn something new everyday… For GAC assembly references you can add a web.config file to your template root. The Web.config file then should contain any full assembly references to GAC components: <configuration> <system.web> <compilation debug="true"> <assemblies> <add assembly="System.Web.Mvc, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> <add assembly="System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> <add assembly="System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> </assemblies> </compilation> </system.web> </configuration> And with that you should get full IntelliSense. Note that if you add a BIN folder and you also have the templates in your Visual Studio project Visual Studio will complain about reference conflicts as it’s effectively seeing both the project references and the ones in the bin folder. So it’s probably a good idea to use one or the other but not both at the same time :-) Seeing IntelliSense in your Razor templates is a big help for users of your templates. If you’re shipping an application level scripting solution especially it’ll be real useful for your template consumers/users to be able to get some quick help on creating customized templates – after all that’s what templates are all about – easy customization. Making sure that everything is referenced in your bin folder and web.config is a good idea and it’s great to see that Visual Studio (and presumably WebMatrix/Visual Web Developer as well) will be able to pick up your custom IntelliSense in Razor templates.© Rick Strahl, West Wind Technologies, 2005-2011Posted in Razor  

  Read the article

• What Makes a Good Design Critic? CHI 2010 Panel Review

  - by jatin.thaker

  Author: Daniel Schwartz, Senior Interaction Designer, Oracle Applications User Experience Oracle Applications UX Chief Evangelist Patanjali Venkatacharya organized and moderated an innovative and stimulating panel discussion titled "What Makes a Good Design Critic? Food Design vs. Product Design Criticism" at CHI 2010, the annual ACM Conference on Human Factors in Computing Systems. The panelists included Janice Rohn, VP of User Experience at Experian; Tami Hardeman, a food stylist; Ed Seiber, a restaurant architect and designer; John Kessler, a food critic and writer at the Atlanta Journal-Constitution; and Larry Powers, Chef de Cuisine at Shaun's restaurant in Atlanta, Georgia. Building off the momentum of his highly acclaimed panel at CHI 2009 on what interaction design can learn from food design (for which I was on the other side as a panelist), Venkatacharya brought together new people with different roles in the restaurant and software interaction design fields. The session was also quite delicious -- but more on that later. Criticism, as it applies to food and product or interaction design, was the tasty topic for this forum and showed that strong parallels exist between food and interaction design criticism. Figure 1. The panelists in discussion: (left to right) Janice Rohn, Ed Seiber, Tami Hardeman, and John Kessler. The panelists had great insights to share from their respective fields, and they enthusiastically discussed as if they were at a casual collegial dinner. John Kessler stated that he prefers to have one professional critic's opinion in general than a large sampling of customers, however, "Web sites like Yelp get users excited by the collective approach. People are attracted to things desired by so many." Janice Rohn added that this collective desire was especially true for users of consumer products. Ed Seiber remarked that while people looked to the popular view for their target tastes and product choices, "professional critics like John [Kessler] still hold a big weight on public opinion." Chef Powers indicated that chefs take in feedback from all sources, adding, "word of mouth is very powerful. We also look heavily at the sales of the dishes to see what's moving; what's selling and thus successful." Hearing this discussion validates our design work at Oracle in that we listen to our users (our diners) and industry feedback (our critics) to ensure an optimal user experience of our products. Rohn considers that restaurateur Danny Meyer's book, Setting the Table: The Transforming Power of Hospitality in Business, which is about creating successful restaurant experiences, has many applicable parallels to user experience design. Meyer actually argues that the customer is not always right, but that "they must always feel heard." Seiber agreed, but noted "customers are not designers," and while designers need to listen to customer feedback, it is the designer's job to synthesize it. Seiber feels it's the critic's job to point out when something is missing or not well-prioritized. In interaction design, our challenges are quite similar, if not parallel. Software tasks are like puzzles that are in search of a solution on how to be best completed. As a food stylist, Tami Hardeman has the demanding and challenging task of presenting food to be as delectable as can be. To present food in its best light requires a lot of creativity and insight into consumer tastes. It's no doubt then that this former fashion stylist came up with the ultimate catch phrase to capture the emotion that clients want to draw from their users: "craveability." The phrase was a hit with the audience and panelists alike. Sometime later in the discussion, Seiber remarked, "designers strive to apply craveability to products, and I do so for restaurants in my case." Craveabilty is also very applicable to interaction design. Creating straightforward and smooth workflows for users of Oracle Applications is a primary goal for my colleagues. We want our users to really enjoy working with our products where it makes them more efficient and better at their jobs. That's our "craveability." Patanjali Venkatacharya asked the panel, "if a design's "craveability" appeals to some cultures but not to others, then what is the impact to the food or product design process?" Rohn stated that "taste is part nature and part nurture" and that the design must take the full context of a product's usage into consideration. Kessler added, "good design is about understanding the context" that the experience necessitates. Seiber remarked how important seat comfort is for diners and how the quality of seating will add so much to the complete dining experience. Sometimes if these non-food factors are not well executed, they can also take away from an otherwise pleasant dining experience. Kessler recounted a time when he was dining at a restaurant that actually had very good food, but the photographs hanging on all the walls did not fit in with the overall décor and created a negative overall dining experience. While the tastiness of the food is critical to a restaurant's success, it is a captivating complete user experience, as in interaction design, which will keep customers coming back and ultimately making the restaurant a hit. Figure 2. Patanjali Venkatacharya enjoyed the Sardinian flatbread salad. As a surprise Chef Powers brought out a signature dish from Shaun's restaurant for all the panelists to sample and critique. The Sardinian flatbread dish showcased Atlanta's taste for fresh and local produce and cheese at its finest as a salad served on a crispy flavorful flat bread. Hardeman said it could be photographed from any angle, a high compliment coming from a food stylist. Seiber really enjoyed the colors that the dish brought together and thought it would be served very well in a casual restaurant on a summer's day. The panel really appreciated the taste and quality of the different components and how the rosemary brought all the flavors together. Seiber remarked that "a lot of effort goes into the appearance of simplicity." Rohn indicated that the same notion holds true with software user interface design. A tremendous amount of work goes into crafting straightforward interfaces, including user research, prototyping, design iterations, and usability studies. Design criticism for food and software interfaces clearly share many similarities. Both areas value expert opinions and user feedback. Both areas understand the importance of great design needing to work well in its context. Last but not least, both food and interaction design criticism value "craveability" and how having users excited about experiencing and enjoying the designs is an important goal. Now if we can just improve the taste of software user interfaces, people may choose to dine on their enterprise applications over a fresh organic salad.

  Read the article

• Sell good CVV, Dumps track 1&2, Paypal, WU TRANSFER

  - by Good Dumps CVV for sale

  My products for sale: Sell CVV; Dumps, track1&2; Bank logins; Paypal Accounts;Ebay Accounts Mailpass; SMTP;RDP;VPS;CCN;SSN; Sell Amazon gift card & itunes gift card; Game Cards, ATM Card; MSR, ATM SKIMMERS. Do WU Transfers and Bank Transfers I am here to sell, supply good and quality CVV for shipping;booking airline ticket;shopping online;ordering Laptop,Iphone;... In last 5 years my Job Is This. PRESTIGE is my first motto. Not easy to build the good PRESTIGE. My motto is Always make customers satisfied & happy ! I have unlocked many softwares make good money, example: -Software to make the bug and crack MTCN of the Western Union. Version : 2.0.1.1 ( new update ) -Software to open balance in PayPal and Bank Login -Software hacking credit card, debit card Version 1.0 **I only sell it for my good customers, and my familiarity ***I update more than 200 CC + CVV everyday. Fresh + good valid + Strong,private + high balance with best price Our products are checked by a partner who works in a bank. Our products are better than 5-7 days after they are dead. They are raised mainly for money atm. Can be used in most countries. ** If you are a serious buyer, let contact via : Yahoo ID: goodcvv_dumps Mail: [email protected] ICQ: 667686221 * Sell CVV; Dumps,track1&2; Bank logins; Paypal Accounts;Ebay Accounts Mailpass; SMTP;RDP;VPS;CCN;SSN; Sell Amazon gift card & itunes gift card; Game Cards, ATM Card; MSR, ATM SKIMMERS. Do WU Transfer and Bank Transfers. CVV for shipping;booking airline ticket;shopping online;ordering Laptop,Iphone;... I promise CC of mine are good,high balance and fresh all with good price. PRESTIGE is my first motto. I sure u will be happy All I need is good & serious buyer to business for a long time * SELL GOOD CVV for shipping;booking airline ticket;shopping online;ordering Laptop,Iphone;...!IF NOT GOOD, WILL CHANGE IMMEDIATELY * Contact me to negotiate about the price if buying bulk. I really need more serious buyers to do long business. You will be given many endow when we have long time business,you do good for me, I do good for u too. Long & good business.This is all I need :) - US (vis,mas)= $3/CC; US (amex,dis)= $5/CC; US BIN; US fullz; USA Visa VBV info for sale. - UK (vis,mas)= $8/CC; UK (amex,dis)= $20/CC; UK BIN; UK DOB; UK with Postcode; UK fullz; UK pass VBV - EU (vis,mas)= $20/CC; EU Amex = $30/CC; EU DOB; EU fullz; EU pass VBV. Include: Italy CVV; Spain CVV; France CVV; Sweden CVV; Denmark CVV; Slovakia CVV; Portugal CVV; Norway CVV; Belgium CVV Greece CVV; Germany CVV; Ireland CVV; Newzealand CVV; Switzerland CVV; Finland CVV; Turkey CVV; Netherland CVV - CA (vis,mas)= $8/CC; CA BIN; CA GOLD; CA Amex; CA Fullz; CA pass VBV - AU (vis,mas)= $10/CC; AU BIN; AU Amex; AU DOB; AU fullz; AU pass VBV - Brazil random = $15/CC; Brazil BIN - Middle East: UAE = $15/CC; Qatar= $10/CC; Saudi Arabia;... - ASIA ( Malay; Indo; Japan;China; Hongkong; Singapore...) = $10/CC - South Africa = $10/CC - And All CC; CC pass VBV; CVV pass VBV; CCN SSN- INTER ( BIN,DOB,SSN,FULLZ) of another Countries. Good CC, CVV for shipping;booking airline ticket;shopping online;ordering Laptop,Iphone;... [Sell CVV; Dumps, track1&2; Bank logins; Paypal Accounts;Ebay Accounts Mailpass; SMTP;RDP;VPS;CCN;SSN; Sell Amazon gift card & itunes gift card; Game Cards, ATM Card; MSR, ATM SKIMMERS. Do WU Transfer and Bank Transfers] [Sell CVV; Dumps, track1&2; Bank logins; Paypal Accounts;Ebay Accounts Mailpass; SMTP;RDP;VPS;CCN;SSN; Sell Amazon gift card & itunes gift card; Game Cards, ATM Card; MSR, ATM SKIMMERS. Do WU Transfers and Bank Transfers] ------------------------------ CONTACT via Y!H: goodcvv_dumps or ICQ: 667686221 or Mail: [email protected] ------------------------------------ * WARNING!!! BEFORE MAKE BUSINESS or add my ID, let read carefull my rule because i really hate Spammers,Rippers and Scammers - Dont trust, dont talk more - Don't Spamm And Don't Scam! I very hate do spam or rip and I don't want who spam me. - All my CVV are tested before sell, that's sure - I accept LR; WU or MoneyGram. - I only work with reliable buyers. Need good & serious buyer to business for a long time - I work with only one slogan: prestige and quality to satisfy my clients !!! - I was so happy to see you actually make more big money from the business with me Once you trust me, work with me. And if not trust,dont contact me, dont waste time! --------------------------THANKS, LOOK FORWARD TO WORKING WITH ALL of YOU !!!---------------------------- * Sell CVV; Dumps, track1&2; Bank logins; Paypal Accounts,Ebay Accounts; Mailpass; SMTP;RDP;VPS;CCN;SSN; Sell Amazon gift card & itunes gift card; Game Cards, ATM Card; MSR, ATM SKIMMERS. Do WU Transfers and Bank Transfers. CVV for shipping;booking airline ticket;shopping online;ordering Laptop,Iphone;... [Sell CVV; Dumps, track1&2; Bank logins; Paypal Accounts,Ebay Accounts; Mailpass; SMTP;RDP;VPS;CCN;SSN; Sell Amazon gift card & itunes gift card; Game Cards, ATM Card; MSR, ATM SKIMMERS. Do WU Transfers and Bank Transfers] * Contact via Y!H: goodcvv_dumps or ICQ: 667686221. Mail: [email protected] ===================== WESTERN UNION TRANSFER SERVICE ======================= We are Very PROFESSIONAL in WESTION UNION. Our Special Job Is this We Have big Western Union Service for everywhere and every when for you. We transfer money to all country in world. We can transfer big amount. And you can receive this money from your country. Our service accept payment 15% of transfer amount for small transfer . And 10% of big transfer. For large transfer . We make is very safe. And this service is very fast. We start to run software to make transfer to your WU info very fast,without delay and immediately. We give you MTCN and sender info and all cashout info, 15 mins after your payment complete. CONTACT US via Y!H: goodcvv_dumps or ICQ: 667686221 or Mail: [email protected] to know more info, price list of WU TRANSFER SERVICE ====================== Verified Paypal Accounts for sale ======================== If u are interested in it, contact me to know the price list & have the Tips for using above accounts safely,not be suspended when using accounts. I will not responsible if you get suspended. ===================== Dumps, Track1&2 with PIN & without PIN for ATM Cashout ======================= - Tracks 1&2 US;Tracks 1&2 UK;Tracks 1&2 CA,AU; Tracks 1&2 EU, with PIN and without PIN. - Dumps US; Dumps CA; Dumps EU; Dumps ASIA; Dumps AU, Brazil with good quality & price. Update Types of Dumps having now: Mix; Debit Classic; MC Standard;MC World; Gold; Platinum; Business/Corporate; Purchasing/Signature; Infinite - Contact me via Y!H: goodcvv_dumps (ICQ: 667686221) to know more info & price list of dumps, tracks ! ======================== Bank Logins Account (US UK CA AU EU) ======================== Sell Bank acc: Bank BOA, Bank HSBC USA, HSBC UK, Chase,Washovia, Halifax, Barclays, Abbey,... I make sure that my BANK LOGIN are security & easily to use. If u are interested in this, contact me to know more info about balance, price list,...! ================= Top-up Prepaid Cards, Debit Cards ========================= - If you hold any prepaid cards, debit cards, any country or any company. - I can top you funds into your prepaid cards, debit cards or any virtual cards. - top up your debit cards with hacked credit cards - top up your prepaid card with bank account login - top up you card with paypal account or any other - Have all tools to top your cards account - Top up does not take more then 10 minutes - Payoneer Cards top up available at cheap ================= Service: Provide Ebay - Apple - Amazon - Itunes GIFT CARD & Game Card with best price ===================== Contact me to negotiate about the price if buying bulk - PlayStation® Network Card - Xbox LIVE 12 Month Gold Membership = 30$ Xbox LIVE 4000 Microsoft Points = 30$ Zynga $50 Game Card (World Wide) = 30$ Ultimate game card 50$ = 30$ Ultimate game card 20$ = 10$ Key Diablo 3 = 25$ ITUNES GIFT CARD AMAZON GIFT CARD Ebay gift card Visa gift card ---------------- Our products are checked by a partner who works in a bank -------------------- Our products are better than 5-7 days after they are dead. They are raised mainly for money atm. Can be used in most countries. ---------------- Contact Via Y!H: goodcvv_dumps or ICQ: 667686221. Mail: [email protected] ------------------------ Need good & serious buyer to business for a long time [Sell CVV, Dumps,track1&2; Bank logins; Paypal Accounts;Ebay Accounts; Mailpass; SMTP;RDP;VPS;CCN;SSN; Sell Amazon gift card & itunes gift card; Game Card, ATM Card, MSR, ATM SKIMMERS. Do WU Transfer and Bank Transfers....Contact via Y!H: goodcvv_dumps or ICQ: 667686221. Mail: [email protected]] [Sell CVV, Dumps,track1&2; Bank logins; Paypal Accounts;Ebay Accounts; Mailpass; SMTP;RDP;VPS;CCN;SSN; Sell Amazon gift card & itunes gift card; Game Card, ATM Card, MSR, ATM SKIMMERS. Do WU Transfer and Bank Transfers....Contact via Y!H: goodcvv_dumps or ICQ: 667686221. Mail: [email protected]] [Sell CVV, Dumps,track1&2; Bank logins; Paypal Accounts;Ebay Accounts; Mailpass; SMTP;RDP;VPS;CCN;SSN; Sell Amazon gift card & itunes gift card; Game Card, ATM Card, MSR, ATM SKIMMERS. Do WU Transfer and Bank Transfers....Contact via Y!H: goodcvv_dumps or ICQ: 667686221. Mail: [email protected]] [Sell CVV, Dumps,track1&2; Bank logins; Paypal Accounts;Ebay Accounts; Mailpass; SMTP;RDP;VPS;CCN;SSN; Sell Amazon gift card & itunes gift card; Game Card, ATM Card, MSR, ATM SKIMMERS. Do WU Transfer and Bank Transfers....Contact via Y!H: goodcvv_dumps or ICQ: 667686221. Mail: [email protected]] [Sell CVV, Dumps,track1&2; Bank logins; Paypal Accounts;Ebay Accounts; Mailpass; SMTP;RDP;VPS;CCN;SSN; Sell Amazon gift card & itunes gift card; Game Card, ATM Card, MSR, ATM SKIMMERS. Do WU Transfer and Bank Transfers....Contact via Y!H: goodcvv_dumps or ICQ: 667686221. Mail: [email protected]]

  Read the article

• CodePlex Daily Summary for Monday, March 12, 2012

  CodePlex Daily Summary for Monday, March 12, 2012Popular ReleasesAvalonDock: AvalonDock 2.0.0345: Welcome to early alpha release of AvalonDock 2.0 I've completely rewritten AvalonDock in order to take full advantage of the MVVM pattern. New version also boost a lot of new features: 1) Deep separation between model and layout. 2) Full WPF binding support thanks to unified logical tree between main docking manager, auto-hide windows and floating windows. 3) Support for Aero semi-maximized windows feature. 4) Support for multiple panes in the same floating windows. For a short list of new f...Windows Azure PowerShell Cmdlets: Windows Azure PowerShell Cmdlets 2.2.2: Changes Added Start Menu Item for Easy Startup Added Link to Getting Started Document Added Ability to Persist Subscription Data to Disk Fixed Get-Deployment to not throw on empty slot Simplified numerous default values for cmdlets Breaking Changes: -SubscriptionName is now mandatory in Set-Subscription. -DefaultStorageAccountName and -DefaultStorageAccountKey parameters were removed from Set-Subscription. Instead, when adding multiple accounts to a subscription, each one needs to be added ...IronPython: 2.7.2: On behalf of the IronPython team, I'm happy to announce the final release IronPython 2.7.2. This release includes everything from IronPython 54498 and 62475 as well. Like all IronPython 2.7-series releases, .NET 4 is required to install it. Installing this release will replace any existing IronPython 2.7-series installation. Unlike previous releases, the assemblies for all supported platforms are included in the installer as well as the zip package, in the "Platforms" directory. IronPython 2...Kooboo CMS: Kooboo CMS 3.2.0.0: Breaking changes: When upgrade from previous versions, MUST reset the all the content type templates, otherwise the content manager might get a compile error. New features Integrate with Windows azure. See: http://wiki.kooboo.com/?wiki=Kooboo CMS on Azure Complete solution to deploy on load balance servers. See: http://wiki.kooboo.com/?wiki=Kooboo CMS load balance Update Jquery and Jquery ui to the lastest version(Jquery 1.71, Jquery UI 1.8.16). Tree style text content editing. See:h...FluentData -Micro ORM with a fluent API that makes it simple to query a database: FluentData version 2.0: New features: - Support for events: OnConnectionClosed, OnConnectionOpened, OnConnectionOpening, OnError, OnExecuted, OnExecuting - Added a CommandTimeout method on the Context. This allows you to set the time out for all the commands. - QueryValues support has been added for Stored Procedures. Changes to existing features: - IgnoreProperty has been moved from a separate property to be a parameter in the AutoMap method.Home Access Plus+: v7.10: Don't forget to add your location to the list: http://www.nbdev.co.uk/projects/hap/locations.aspx Changes: Added: CompressJS controls to the Help Desk & Booking System (reduces page size) Fixed: Debug/Release mode detection in CompressJS control Added: Older Browsers will use an iframe and the old uploadh.aspx page (works better than the current implementation on older browsers) Added: Permalinks for my files, you can give out links that redirect to the correct location when you log i...SubExtractor: Release 1026: Fix: multi-colored bluray subs will no longer result in black blob for OCR Fix: dvds with no language specified will not cause exception in name creation of subtitle files Fix: Root directory Dvds will use volume label as their directory nameExtensions for Reactive Extensions (Rxx): Rxx 1.3: Please read the latest release notes for details about what's new. Related Work Items Content SummaryRxx provides the following features. See the Documentation for details. Many IObservable<T> extension methods and IEnumerable<T> extension methods. Many wrappers that convert asynchronous Framework Class Library APIs into observables. Many useful types such as ListSubject<T>, DictionarySubject<T>, CommandSubject, ViewModel, ObservableDynamicObject, Either<TLeft, TRight>, Maybe<T>, Scala...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.47: Properly output escaped characters in CSS identifiers throw an EOF error when parsing a CSS selector that doesn't end in a declaration block chased down a stack-overflow issue with really large JS sources. Needed to flatten out the AST tree for adjacent expression statements that the application merges into a single expression statement, or that already contain large, comma-separated expressions in the original source. fix issue #17569: tie together the -debug switch with the DEBUG defi...Player Framework by Microsoft: Player Framework for Windows 8 Metro (BETA): Player Framework for HTML/JavaScript and XAML/C# Metro Style Applications.WPF Application Framework (WAF): WAF for .NET 4.5 (Experimental): Version: 2.5.0.440 (Experimental): This is an experimental release! It can be used to investigate the new .NET Framework 4.5 features. The ideas shown in this release might come in a future release (after 2.5) of the WPF Application Framework (WAF). More information can be found in this dicussion post. Requirements .NET Framework 4.5 (The package contains a solution file for Visual Studio 11) The unit test projects require Visual Studio 11 Professional Changelog All: Upgrade all proje...SSH.NET Library: 2012.3.9: There are still few outstanding issues I wanted to include in this release but since its been a while and there are few new features already I decided to create a new release now. New Features Add SOCKS4, SOCKS5 and HTTP Proxy support when connecting to remote server. For silverlight only IP address can be used for server address when using proxy. Add dynamic port forwarding support using ForwardedPortDynamic class. Add new ShellStream class to work with SSH Shell. Add supports for mu...Test Case Import Utilities for Visual Studio 2010 and Visual Studio 11 Beta: V1.2 RTM: This release (V1.2 RTM) includes: Support for connecting to Hosted Team Foundation Server Preview. Support for connecting to Team Foundation Server 11 Beta. Fix to issue with read-only attribute being set for LinksMapping-ReportFile which may have led to problems when saving the report file. Fix to issue with “related links” not being set properly in certain conditions. Fix to ensure that tool works fine when the Excel file contained rich text data. Note: Data is still imported in pl...DotNetNuke® Community Edition CMS: 06.01.04: Major Highlights Fixed issue with loading the splash page skin in the login, privacy and terms of use pages Fixed issue when searching for words with special characters in them Fixed redirection issue when the user does not have permissions to access a resource Fixed issue when clearing the cache using the ClearHostCache() function Fixed issue when displaying the site structure in the link to page feature Fixed issue when inline editing the title of modules Fixed issue with ...Mayhem: Mayhem Developer Preview: This is the developer preview of Mayhem. Enjoy!Magelia WebStore Open-source Ecommerce software: Magelia WebStore 1.2: Medium trust compliant lot of small change for medium trust compliance full refactoring of user management refactoring of Client Refactoring of user management Magelia.WebStore.Client no longer reference Magelia.WebStore.Services.Contract Refactoring page category multi parent category added copy category feature added Refactoring page catalog copy catalog feature added variant management improvement ability to define a default variant for a variable product ability to ord...PDFsharp - A .NET library for processing PDF: PDFsharp and MigraDoc Foundation 1.32: PDFsharp and MigraDoc Foundation 1.32 is a stable version that fixes a few bugs that were found with version 1.31. Version 1.32 includes solutions for Visual Studio 2010 only (but it should be possible to add the project files to existing solutions for VS 2005 or VS 2008). Users of VS 2005 or VS 2008 can still download version 1.31 with the solutions for those versions that allow them to easily try the samples that are included. While it may create smaller PDF files than version 1.30 because...Terminals: Version 2.0 - Release: Changes since version 1.9a:New art works New usability in Organize favorites window Improved usability of imports/exports and scans Large number of fixes Improvements in single instance mode Comparing November beta 4, this corrects: New application icons Doesn't show Logon error codes Fixed command line arguments exception for single instance mode Fixed detaching of tabs improved usability in detached window Fixed option settings for Capture manager Fixed system tray noti...MFCMAPI: March 2012 Release: Build: 15.0.0.1032 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeTortoiseHg: TortoiseHg 2.3.1: bugfix releaseNew ProjectsBurrow.NET: Burrow is a simple library created based on some EasyNetQ ideas, it's a thin wrapper of RabbitMQ.Client for .NET. Basically, if you just need to put your message or subscribe messages from RabbitMQ server, you found the right place. With Burrow.NET, you can easily customize almost everything start with exchange and queue name, changing the way to serialize your object, inject custom error handling strategies, etc.C# Base Media File Format Library: Parses ISO Base Media File Format files including QuickTime (.mov, .mp4, .m4v, .m4a), Microsoft Smooth Streaming (.ismv, .isma, .ismc), JPEG2000 (.jp2, .jpf, .jpx), Motion JPEG2000 (.mj2, .mjp2), 3GPP/3GPP2 (.3gp, .3g2) and other conforming format extensions.devtm.Aop: Aspect Oriented Programming with Mono.Cecil (on build time and runtime)Dynamics CRM 2011 Script# Xrm.Page Library: This is a Script# (scriptsharp) import library that you can use to write Dynamics CRM 2011 web resources easily and efficiently. This library provides access to all functions currently documented under MSDN Xrm.Page.EntityUI: EntityUI is basically an idea to be able to create User Interface in ASP .Net applications using Code First approcah. Flurr: Flurr is the ultimate open source API wrapper library for different social networks such as Tumblr, Twitter and more! With it, you can easily connect to social networks in your desktop or web applications, by simply importing a .dll file.GerenciadorPacotes: Gerenciador de PacotesInfo Bandung: Woyyy, Orang Bandung kita bagi2 Info yu disini, smua tentang Bandung boleh tempat makanan, tempat gaul, trend, tempat murah,,, apapun yang asik-asik :-) jstring Multilingual Class Library: jstring is a small library that provides multilingual string support. The jstring class provides programmatic support for projects that require the ability to change languages on-the-fly. Kinect: Tower Defence: Kinect: Tower Defence is a 2D tower defence game programmed in C# using the XNA Framework, played on the PC. It will make use of the Kinect hardware and motion tracking to add more fun to how the game is controlled and played.Kuick -- Application Framework: An Application Framework. Kuick Data -- ORM Framework: An ORM FrameworkMelorin Radio: This is a test project for radioNorthwind-projekt: Projekt oparty na bazie Northwindolaf: olaf makes it easier for manual qa testers to use selenium web-driver by defining their test case flows in excel spreadsheets.OpenSOCKS (Open Shared Objective Collaborative Kernel System): OpenSOCKS is the best of two fantastic C# -> OS kernel compilers (MOSA and COSMOS) We are open source and aim to make our kernel simple and full of features. OpenSOCKS (Open Shared Objective Collaborative Kernel System) - by the makers of PearOSpelotas: okRadaCode.SwissKnife: SwissKnife is a RadaCode's collection of C# classes that facilitate the overall development and help with stuff like HTML removal, random name and number generation, etc. Simple AutoUpdater: This project is a simple updater.Simple TFS Tool: Simple TFS Tool for getting source from TFSSISAP: SISAPSnippet Compiler Tool Window: Snippet Compiler adds a tool window to the Visual Studio 2010 and 11 Beta where you can type/paste code snippets and try to compile them to see if they workTagomatique: Permet la gestion de fichiers multimédia sur principe des tagstsi2012: Proyecto de TS1 año 2012wbgj: this is weibo projectWindows Phone 7 Text Style Picker: WP7TextStylePicker was created to fill the gaping whole in the SDK: surprisingly, there is no control that would allow setting text properties (Color, Font Family, Font Size, Bold, Italic) - even though this sounds like a very basic task that many applications would need.WPLiveEdu: Windows phone application for browsing Live@Edu calendar

  Read the article

• Movement prediction for non-shooters

  - by ShadowChaser

  I'm working on an isometric 2D game with moderate-scale multiplayer, approximately 20-30 players connected at once to a persistent server. I've had some difficulty getting a good movement prediction implementation in place. Physics/Movement The game doesn't have a true physics implementation, but uses the basic principles to implement movement. Rather than continually polling input, state changes (ie/ mouse down/up/move events) are used to change the state of the character entity the player is controlling. The player's direction (ie/ north-east) is combined with a constant speed and turned into a true 3D vector - the entity's velocity. In the main game loop, "Update" is called before "Draw". The update logic triggers a "physics update task" that tracks all entities with a non-zero velocity uses very basic integration to change the entities position. For example: entity.Position += entity.Velocity.Scale(ElapsedTime.Seconds) (where "Seconds" is a floating point value, but the same approach would work for millisecond integer values). The key point is that no interpolation is used for movement - the rudimentary physics engine has no concept of a "previous state" or "current state", only a position and velocity. State Change and Update Packets When the velocity of the character entity the player is controlling changes, a "move avatar" packet is sent to the server containing the entity's action type (stand, walk, run), direction (north-east), and current position. This is different from how 3D first person games work. In a 3D game the velocity (direction) can change frame to frame as the player moves around. Sending every state change would effectively transmit a packet per frame, which would be too expensive. Instead, 3D games seem to ignore state changes and send "state update" packets on a fixed interval - say, every 80-150ms. Since speed and direction updates occur much less frequently in my game, I can get away with sending every state change. Although all of the physics simulations occur at the same speed and are deterministic, latency is still an issue. For that reason, I send out routine position update packets (similar to a 3D game) but much less frequently - right now every 250ms, but I suspect with good prediction I can easily boost it towards 500ms. The biggest problem is that I've now deviated from the norm - all other documentation, guides, and samples online send routine updates and interpolate between the two states. It seems incompatible with my architecture, and I need to come up with a better movement prediction algorithm that is closer to a (very basic) "networked physics" architecture. The server then receives the packet and determines the players speed from it's movement type based on a script (Is the player able to run? Get the player's running speed). Once it has the speed, it combines it with the direction to get a vector - the entity's velocity. Some cheat detection and basic validation occurs, and the entity on the server side is updated with the current velocity, direction, and position. Basic throttling is also performed to prevent players from flooding the server with movement requests. After updating its own entity, the server broadcasts an "avatar position update" packet to all other players within range. The position update packet is used to update the client side physics simulations (world state) of the remote clients and perform prediction and lag compensation. Prediction and Lag Compensation As mentioned above, clients are authoritative for their own position. Except in cases of cheating or anomalies, the client's avatar will never be repositioned by the server. No extrapolation ("move now and correct later") is required for the client's avatar - what the player sees is correct. However, some sort of extrapolation or interpolation is required for all remote entities that are moving. Some sort of prediction and/or lag-compensation is clearly required within the client's local simulation / physics engine. Problems I've been struggling with various algorithms, and have a number of questions and problems: Should I be extrapolating, interpolating, or both? My "gut feeling" is that I should be using pure extrapolation based on velocity. State change is received by the client, client computes a "predicted" velocity that compensates for lag, and the regular physics system does the rest. However, it feels at odds to all other sample code and articles - they all seem to store a number of states and perform interpolation without a physics engine. When a packet arrives, I've tried interpolating the packet's position with the packet's velocity over a fixed time period (say, 200ms). I then take the difference between the interpolated position and the current "error" position to compute a new vector and place that on the entity instead of the velocity that was sent. However, the assumption is that another packet will arrive in that time interval, and it's incredibly difficult to "guess" when the next packet will arrive - especially since they don't all arrive on fixed intervals (ie/ state changes as well). Is the concept fundamentally flawed, or is it correct but needs some fixes / adjustments? What happens when a remote player stops? I can immediately stop the entity, but it will be positioned in the "wrong" spot until it moves again. If I estimate a vector or try to interpolate, I have an issue because I don't store the previous state - the physics engine has no way to say "you need to stop after you reach position X". It simply understands a velocity, nothing more complex. I'm reluctant to add the "packet movement state" information to the entities or physics engine, since it violates basic design principles and bleeds network code across the rest of the game engine. What should happen when entities collide? There are three scenarios - the controlling player collides locally, two entities collide on the server during a position update, or a remote entity update collides on the local client. In all cases I'm uncertain how to handle the collision - aside from cheating, both states are "correct" but at different time periods. In the case of a remote entity it doesn't make sense to draw it walking through a wall, so I perform collision detection on the local client and cause it to "stop". Based on point #2 above, I might compute a "corrected vector" that continually tries to move the entity "through the wall" which will never succeed - the remote avatar is stuck there until the error gets too high and it "snaps" into position. How do games work around this?

  Read the article

• Massive Silverlight Giveaway! DevExpress , Syncfusion, Crypto Obfuscator and SL Spy!

  - by mbcrump

  Oh my, have we grown! Maybe I should change the name to Multiple Silverlight Giveaways. So far, my Silverlight giveaways have been such a success that I’m going to be able to give away more than one Silverlight product every month. Last month, we gave away 3 great products. 1) ComponentOne Silverlight Controls 2)  ComponentOne XAP Optimizer (with obfuscation) and 3) Silverlight Spy. This month, we will give away 4 great Silverlight products and have 4 different winners. This way the Silverlight community can grow with more than just one person winning all the prizes. This month we will be giving away: DevExpress Silverlight Controls – Over 50+ Silverlight Controls Syncfusion User Interface Edition - Create stunning line of business silverlight applications with a wide range of components including a high performance grid, docking manager, chart, gauge, scheduler and much more. Crypto Obfuscator – Works for all .NET including Silverlight/Windows Phone 7. Silverlight Spy – provides a license EVERY month for this giveaway. ----------------------------------------------------------------------------------------------------------------------------------------------------------- Win a FREE developer’s license of one of the products listed above! 4 winners will be announced on April 1st, 2011! To be entered into the contest do the following things: Subscribe to my feed. – Use Google Reader, email or whatever is best for you.  Leave a comment below with a valid email account (I WILL NOT share this info with anyone.) Retweet the following : I just entered to win free #Silverlight controls from @mbcrump . Register here: http://mcrump.me/fTSmB8 ! Don’t change the URL because this will allow me to track the users that Tweet this page. Don’t forget to visit each of the vendors sites because they made this possible. MichaelCrump.Net provides Silverlight Giveaways every month. You can also see the latest giveaway by bookmarking http://giveaways.michaelcrump.net . ---------------------------------------------------------------------------------------------------------------------------------------------------------- DevExpress Silverlight Controls Let’s take a quick look at some of the software that is provided in this giveaway. Before we get started with the Silverlight Controls, here is a couple of links to bookmark for the DevExpress Silverlight Controls: The Live Demos of the Silverlight Controls is located here. Great Video Tutorials of the Silverlight Controls are here. One thing that I liked about the DevExpress is how easy it was to find demos of each control. After you install the controls the following Program Group appears complete with “demos” that include full-source.   So, the first question that you may ask is, “What is included?” Here is the official list below. I wanted to show several of the controls that I think developers will use the most. The Book – Very rich animation between switching pages. Very easy to add your own images and custom text. The Menu – This is another control that just looked great. You can easily add images to the menu items with a few lines of XAML. The Window / Dialog Box – You can use this control to make a very beautiful “Wizard” to help your users navigate between pages. This is useful in setup or installation. Calculator – This would be useful for any type of Banking app. Also a first that I’ve seen from a 3rd party Control company. DatePicker – This controls feels a lot smoother than the one provided by Microsoft. It also provides the ability to “Clear” the selection. Overall the DevExpress Silverlight Controls feature a lot of quality controls that you should check out. You can go ahead and download a trial version of it right now by clicking here. If you win the contest you can simply enter your registration key and continue using the product without reinstalling. Syncfusion User Interface Edition Before we get started with the Syncfusion User Interface Edition, here is a couple of links to bookmark. The Live Demos can be found here. You can download a demo of it now at http://www.syncfusion.com/downloads/evalstart. After you install the Syncfusion, you can view the dashboard to run locally installed samples. You may also download the documentation to your local machine if needed. Since the name of the package is “User Interface Edition”, I decided to share several samples that struck me as “awesome”. Dashboard Gauges – I was very impressed with the various gauges they have included. The digital clock also looks very impressive. Diagram – The diagrams are also very easy to build. In the sample project below you can drag/drop the shapes onto the content pane. More complex lines like the Bezier lines are also easy to create using Syncfusion. Scheduling – Another strong component was the Scheduling with built-in support for Themes. Tools – If all of that wasn’t enough, it also comes with a nice pack of essential tools. Syncfusion has a nice variety of Silverlight Controls that you should check out. You can go ahead and download a trial version of it right now by clicking here. Crypto Obfuscator The following feature set is what is important to me in an Obfuscator since I am a Silverlight/WP7 Developer: And thankfully this is what you get in Crypto Obfuscator. You can download a trial version right now if you want to go ahead and play with it. Let’s spend a few moments taking a look at the application. After you have installed Crypto Obfuscator you will see the following screen: After you click on Assemblies you have the option to add your .XAP file in: I went ahead and loaded my .xap file from a Silverlight Application. At this point, you can simply save your project and hit “Obfuscate” and your done. You don’t have to mess with any of the other settings if you don’t want too. Of course, you can change the settings and add obfuscation rules, watermarks and signing if you wish.  After Obfuscation, it looks like this in .NET Reflector: I was trying to browse through methods and it actually crashed Reflector. This confirms the level of protection the obfuscator is providing. If this were a commercial application that my team built, I would have a huge smile on my face right now. Crypto Obfuscator is a great product and I hope you will spend the time learning more about it. Silverlight Spy Silverlight Spy is a runtime inspector tool that will tell you pretty much everything that is going on with the application. Basically, you give it a URL that contains a Silverlight application and you can explore the element tree, events, xaml and so much more. This has already been reviewed on MichaelCrump.net. _________________________________________________________________________________________ Thanks for reading and don’t forget to leave a comment below in order to win one of the four prizes available! Subscribe to my feed

  Read the article

• XNA: Rotating Bones

  - by MLM

  XNA 4.0 I am trying to learn how to rotate bones on a very simple tank model I made in Cinema 4D. It is rigged by 3 bones, Root - Main - Turret - Barrel I have binded all of the objects to the bones so that all translations/rotations work as planned in C4D. I exported it as .fbx I based my test project after: http://create.msdn.com/en-US/education/catalog/sample/simple_animation I can build successfully with no errors but all the rotations I try to do to my bones have no effect. I can transform my Root successfully using below but the bone transforms have no effect: myModel.Root.Transform = world; Matrix turretRotation = Matrix.CreateRotationY(MathHelper.ToRadians(37)); Matrix barrelRotation = Matrix.CreateRotationX(barrelRotationValue); MainBone.Transform = MainTransform; TurretBone.Transform = turretRotation * TurretTransform; BarrelBone.Transform = barrelRotation * BarrelTransform; I am wondering if my model is just not right or something important I am missing in the code. Here is my Game1.cs using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace ModelTesting { /// <summary> /// This is the main type for your game /// </summary> public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; float aspectRatio; Tank myModel; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; } /// <summary> /// Allows the game to perform any initialization it needs to before starting to run. /// This is where it can query for any required services and load any non-graphic /// related content. Calling base.Initialize will enumerate through any components /// and initialize them as well. /// </summary> protected override void Initialize() { // TODO: Add your initialization logic here myModel = new Tank(); base.Initialize(); } /// <summary> /// LoadContent will be called once per game and is the place to load /// all of your content. /// </summary> protected override void LoadContent() { // Create a new SpriteBatch, which can be used to draw textures. spriteBatch = new SpriteBatch(GraphicsDevice); // TODO: use this.Content to load your game content here myModel.Load(Content); aspectRatio = graphics.GraphicsDevice.Viewport.AspectRatio; } /// <summary> /// UnloadContent will be called once per game and is the place to unload /// all content. /// </summary> protected override void UnloadContent() { // TODO: Unload any non ContentManager content here } /// <summary> /// Allows the game to run logic such as updating the world, /// checking for collisions, gathering input, and playing audio. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Update(GameTime gameTime) { // Allows the game to exit if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) this.Exit(); // TODO: Add your update logic here float time = (float)gameTime.TotalGameTime.TotalSeconds; // Move the pieces /* myModel.TurretRotation = (float)Math.Sin(time * 0.333f) * 1.25f; myModel.BarrelRotation = (float)Math.Sin(time * 0.25f) * 0.333f - 0.333f; */ base.Update(gameTime); } /// <summary> /// This is called when the game should draw itself. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); // Calculate the camera matrices. float time = (float)gameTime.TotalGameTime.TotalSeconds; Matrix rotation = Matrix.CreateRotationY(MathHelper.ToRadians(45)); Matrix view = Matrix.CreateLookAt(new Vector3(2000, 500, 0), new Vector3(0, 150, 0), Vector3.Up); Matrix projection = Matrix.CreatePerspectiveFieldOfView(MathHelper.PiOver4, graphics.GraphicsDevice.Viewport.AspectRatio, 10, 10000); // TODO: Add your drawing code here myModel.Draw(rotation, view, projection); base.Draw(gameTime); } } } And here is my tank class: using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace ModelTesting { public class Tank { Model myModel; // Array holding all the bone transform matrices for the entire model. // We could just allocate this locally inside the Draw method, but it // is more efficient to reuse a single array, as this avoids creating // unnecessary garbage. public Matrix[] boneTransforms; // Shortcut references to the bones that we are going to animate. // We could just look these up inside the Draw method, but it is more // efficient to do the lookups while loading and cache the results. ModelBone MainBone; ModelBone TurretBone; ModelBone BarrelBone; // Store the original transform matrix for each animating bone. Matrix MainTransform; Matrix TurretTransform; Matrix BarrelTransform; // current animation positions float turretRotationValue; float barrelRotationValue; /// <summary> /// Gets or sets the turret rotation amount. /// </summary> public float TurretRotation { get { return turretRotationValue; } set { turretRotationValue = value; } } /// <summary> /// Gets or sets the barrel rotation amount. /// </summary> public float BarrelRotation { get { return barrelRotationValue; } set { barrelRotationValue = value; } } /// <summary> /// Load the model /// </summary> public void Load(ContentManager Content) { // TODO: use this.Content to load your game content here myModel = Content.Load<Model>("Models\\simple_tank02"); MainBone = myModel.Bones["Main"]; TurretBone = myModel.Bones["Turret"]; BarrelBone = myModel.Bones["Barrel"]; MainTransform = MainBone.Transform; TurretTransform = TurretBone.Transform; BarrelTransform = BarrelBone.Transform; // Allocate the transform matrix array. boneTransforms = new Matrix[myModel.Bones.Count]; } public void Draw(Matrix world, Matrix view, Matrix projection) { myModel.Root.Transform = world; Matrix turretRotation = Matrix.CreateRotationY(MathHelper.ToRadians(37)); Matrix barrelRotation = Matrix.CreateRotationX(barrelRotationValue); MainBone.Transform = MainTransform; TurretBone.Transform = turretRotation * TurretTransform; BarrelBone.Transform = barrelRotation * BarrelTransform; myModel.CopyAbsoluteBoneTransformsTo(boneTransforms); // Draw the model, a model can have multiple meshes, so loop foreach (ModelMesh mesh in myModel.Meshes) { // This is where the mesh orientation is set foreach (BasicEffect effect in mesh.Effects) { effect.World = boneTransforms[mesh.ParentBone.Index]; effect.View = view; effect.Projection = projection; effect.EnableDefaultLighting(); } // Draw the mesh, will use the effects set above mesh.Draw(); } } } }

  Read the article

• Using JQuery tabs in an HTML 5 page

  - by nikolaosk

  In this post I will show you how to create a simple tabbed interface using JQuery,HTML 5 and CSS.Make sure you have downloaded the latest version of JQuery (minified version) from http://jquery.com/download.Please find here all my posts regarding JQuery.Also have a look at my posts regarding HTML 5.In order to be absolutely clear this is not (and could not be) a detailed tutorial on HTML 5. There are other great resources for that.Navigate to the excellent interactive tutorials of W3School.Another excellent resource is HTML 5 Doctor.Two very nice sites that show you what features and specifications are implemented by various browsers and their versions are http://caniuse.com/ and http://html5test.com/. At this times Chrome seems to support most of HTML 5 specifications.Another excellent way to find out if the browser supports HTML 5 and CSS 3 features is to use the Javascript lightweight library Modernizr.In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here. Let me move on to the actual example.This is the sample HTML 5 page<!DOCTYPE html><html lang="en">  <head>    <title>Liverpool Legends</title>    <meta http-equiv="Content-Type" content="text/html;charset=utf-8" >    <link rel="stylesheet" type="text/css" href="style.css">    <script type="text/javascript" src="jquery-1.8.2.min.js"> </script>     <script type="text/javascript" src="tabs.js"></script>       </head>  <body>    <header>        <h1>Liverpool Legends</h1>    </header>     <section id="tabs">        <ul>            <li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=9143136#first-tab">Defenders</a></li>            <li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=9143136#second-tab">Midfielders</a></li>            <li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=9143136#third-tab">Strikers</a></li>        </ul>   <div id="first-tab">     <h3>Liverpool Defenders</h3>     <p> The best defenders that played for Liverpool are Jamie Carragher, Sami Hyypia , Ron Yeats and Alan Hansen.</p>   </div>   <div id="second-tab">     <h3>Liverpool Midfielders</h3>     <p> The best midfielders that played for Liverpool are Kenny Dalglish, John Barnes,Ian Callaghan,Steven Gerrard and Jan Molby.        </p>   </div>   <div id="third-tab">     <h3>Liverpool Strikers</h3>     <p>The best strikers that played for Liverpool are Ian Rush,Roger Hunt,Robbie Fowler and Fernando Torres.<br/>      </p>   </div> </div></section>            <footer>        <p>All Rights Reserved</p>      </footer>     </body>  </html>  This is very simple HTML markup. I have styled this markup using CSS.The contents of the style.css file follow* {    margin: 0;    padding: 0;}header{font-family:Tahoma;font-size:1.3em;color:#505050;text-align:center;}#tabs {    font-size: 0.9em;    margin: 20px 0;}#tabs ul {    float: left;    background: #777;    width: 260px;    padding-top: 24px;}#tabs li {    margin-left: 8px;    list-style: none;}* html #tabs li {    display: inline;}#tabs li, #tabs li a {    float: left;}#tabs ul li.active {    border-top:2px red solid;    background: #15ADFF;}#tabs ul li.active a {    color: #333333;}#tabs div {    background: #15ADFF;    clear: both;    padding: 15px;    min-height: 200px;}#tabs div h3 {    margin-bottom: 12px;}#tabs div p {    line-height: 26px;}#tabs ul li a {    text-decoration: none;    padding: 8px;    color:#0b2f20;    font-weight: bold;}footer{background-color:#999;width:100%;text-align:center;font-size:1.1em;color:#002233;}There are some CSS rules that style the various elements in the HTML 5 file. These are straight-forward rules. The JQuery code lives inside the tabs.js file $(document).ready(function(){$('#tabs div').hide();$('#tabs div:first').show();$('#tabs ul li:first').addClass('active'); $('#tabs ul li a').click(function(){$('#tabs ul li').removeClass('active');$(this).parent().addClass('active');var currentTab = $(this).attr('href');$('#tabs div').hide();$(currentTab).show();return false;});}); I am using some of the most commonly used JQuery functions like hide , show, addclass , removeClass I hide and show the tabs when the tab becomes the active tab. When I view my page I get the following result Hope it helps!!!!!

  Read the article

• Advanced Continuous Delivery to Azure from TFS, Part 1: Good Enough Is Not Great

  - by jasont

  The folks over on the TFS / Visual Studio team have been working hard at releasing a steady stream of new features for their new hosted Team Foundation Service in the cloud. One of the most significant features released was simple continuous delivery of your solution into your Azure deployments. The original announcement from Brian Harry can be found here. Team Foundation Service is a great platform for .Net developers who are used to working with TFS on-premises. I’ve been using it since it became available at the //BUILD conference in 2011, and when I recently came to work at Stackify, it was one of the first changes I made. Managing work items is much easier than the tool we were using previously, although there are some limitations (more on that in another blog post). However, when continuous deployment was made available, it blew my mind. It was the killer feature I didn’t know I needed. Not to say that I wasn’t previously an advocate for continuous delivery; just that it was always a pain to set up and configure. Having it hosted - and a one-click setup – well, that’s just the best thing since sliced bread. It made perfect sense: my source code is in the cloud, and my deployment is in the cloud. Great! I can queue up a build from my iPad or phone and just let it go! I quickly tore through the quick setup and saw it all work… sort of. This will be the first in a three part series on how to take the building block of Team Foundation Service continuous delivery and build a CD model that will actually work for any team deploying something more advanced than a “Hello World” example. Part 1: Good Enough Is Not Great Part 2: A Model That Works: Branching and Multiple Deployment Environments Part 3: Other Considerations: SQL, Custom Tasks, Etc Good Enough Is Not Great There. I’ve said it. I certainly hope no one on the TFS team is offended, but it’s the truth. Let’s take a look under the hood and understand how it works, and then why it’s not enough to handle real world CD as-is. How it works. (note that I’ve skipped a couple of steps; I already have my accounts set up and something deployed to Azure) The first step is to establish some oAuth magic between your Azure management portal and your TFS Instance. You do this via the management portal. Once it’s done, you have a new build process template in your TFS instance. (Image lifted from the documentation) From here, you’ll get the usual prompts for security, allowing access, etc. But you’ll also get to pick which Solution in your source control to build. Here’s what the bulk of the build definition looks like. All I’ve had to do is add in the solution to build (notice that mine is from a specific branch – Release – more on that later) and I’ve changed the configuration. I trigger the build, and voila! I have an Azure deployment a few minutes later. The beauty of this is that it’s all in the cloud and I’m not waiting for my machine to compile and upload the package. (I also had to enable the build definition first – by default it is created in disabled state, probably a good thing since it will trigger on every.single.checkin by default.) I get to see a history of deployments from the Azure portal, and can link into TFS to see the associated changesets and work items. You’ll notice also that this build definition also automatically put my code in the Staging slot of my Azure deployment – more on this soon. For now, I can VIP swap and be in production. (P.S. I hate VIP swap and “production” and “staging” in Azure. More on that later too.) That’s it. That’s the default out-of-box experience. Easy, right? But it’s full of room for improvement, so let’s get into that….   The Problems Nothing is perfect (except my code – it’s always perfect), and neither is Continuous Deployment without a bit of work to help it fit your dev team’s process. So what are the issues? Issue 1: Staging vs QA vs Prod vs whatever other environments your team may have. This, for me, is the big hairy one. Remember how this automatically deployed to staging rather than prod for us? There are a couple of issues with this model: If I want to deliver to prod, it requires intervention on my part after deployment (via a VIP swap). If I truly want to promote between environments (i.e. Nightly Build –> Stable QA –> Production) I likely have configuration changes between each environment such as database connection strings and this process (and the VIP swap) doesn’t account for this. Yet. Issue 2: Branching and delivering on every check-in. As I mentioned above, I have set this up to target a specific branch – Release – of my code. For the purposes of this example, I have adopted the “basic” branching strategy as defined by the ALM Rangers. This basically establishes a “Main” trunk where you branch off Dev and Release branches. Granted, the Release branch is usually the only thing you will deploy to production, but you certainly don’t want to roll to production automatically when you merge to the Release branch and check-in (unless you like the thrill of it, and in that case, I like your style, cowboy….). Rather, you have nightly build and QA environments, or if you’ve adopted the feature-branch model you have environments for those. Those are the environments you want to continuously deploy to. But that takes us back to Issue 1: we currently have a 1:1 solution to Azure deployment target. Issue 3: SQL and other custom tasks. Let’s be honest and address the elephant in the room: I need to get some sleep because I see an elephant in the room. But seriously, I can’t think of an application I have touched in the last 10 years that doesn’t need to consider SQL changes when deploying code and upgrading an environment. Microsoft seems perfectly content to ignore this elephant for now: yes, they’ve added Data Tier Applications. But let’s be honest with ourselves again: no one really uses it, and it’s not suitable for anything more complex than a Hello World sample project database. Why? Because it doesn’t fit well into a great source control story. Developers make stored procedure and table changes all day long while coding complex applications, and if someone forgets to go update the DACPAC before the automated deployment, you have a broken build until it’s completed. Developers – not just DBAs – also like to work with SQL in SQL tools, not in Visual Studio. I’m really picking on SQL because that’s generally the biggest concern that I hear. But we need to account for any custom tasks as well in the build process.   The Solutions… ? We’ve taken a look at how this all works, and addressed the shortcomings. In my next post (which I promise will be very, very soon), I will detail how I’ve overcome these shortcomings and used this foundation to create a mature, flexible model for deploying my app – any version, any time, to any environment.

  Read the article

• Library like ENet, but for TCP?

  - by Milo

  I'm not looking to use boost::asio, it is overly complex for my needs. I'm building a game that is cross platform, for desktop, iPhone and Android. I found a library called ENet which is pretty much what I need, but it uses UDP which does not seem to support encryption and a few other things. Given that the game is an event driven card game, TCP seems like the right fit. However, all I have found is WINSOCK / berkley sockets and bost::asio. Here is a sample client server application with ENet: #include <enet/enet.h> #include <stdlib.h> #include <string> #include <iostream> class Host { ENetAddress address; ENetHost * server; ENetHost* client; ENetEvent event; public: Host() :server(NULL) { enet_initialize(); setupServer(); } void setupServer() { if(server) { enet_host_destroy(server); server = NULL; } address.host = ENET_HOST_ANY; /* Bind the server to port 1234. */ address.port = 1721; server = enet_host_create (& address /* the address to bind the server host to */, 32 /* allow up to 32 clients and/or outgoing connections */, 2 /* allow up to 2 channels to be used, 0 and 1 */, 0 /* assume any amount of incoming bandwidth */, 0 /* assume any amount of outgoing bandwidth */); } void daLoop() { while(true) { /* Wait up to 1000 milliseconds for an event. */ while (enet_host_service (server, & event, 5000) > 0) { ENetPacket * packet; switch (event.type) { case ENET_EVENT_TYPE_CONNECT: printf ("A new client connected from %x:%u.\n", event.peer -> address.host, event.peer -> address.port); /* Store any relevant client information here. */ event.peer -> data = "Client information"; /* Create a reliable packet of size 7 containing "packet\0" */ packet = enet_packet_create ("packet", strlen ("packet") + 1, ENET_PACKET_FLAG_RELIABLE); /* Extend the packet so and append the string "foo", so it now */ /* contains "packetfoo\0" */ enet_packet_resize (packet, strlen ("packetfoo") + 1); strcpy ((char*)& packet -> data [strlen ("packet")], "foo"); /* Send the packet to the peer over channel id 0. */ /* One could also broadcast the packet by */ /* enet_host_broadcast (host, 0, packet); */ enet_peer_send (event.peer, 0, packet); /* One could just use enet_host_service() instead. */ enet_host_flush (server); break; case ENET_EVENT_TYPE_RECEIVE: printf ("A packet of length %u containing %s was received from %s on channel %u.\n", event.packet -> dataLength, event.packet -> data, event.peer -> data, event.channelID); /* Clean up the packet now that we're done using it. */ enet_packet_destroy (event.packet); break; case ENET_EVENT_TYPE_DISCONNECT: printf ("%s disconected.\n", event.peer -> data); /* Reset the peer's client information. */ event.peer -> data = NULL; } } } } ~Host() { if(server) { enet_host_destroy(server); server = NULL; } atexit (enet_deinitialize); } }; class Client { ENetAddress address; ENetEvent event; ENetPeer *peer; ENetHost* client; public: Client() :peer(NULL) { enet_initialize(); setupPeer(); } void setupPeer() { client = enet_host_create (NULL /* create a client host */, 1 /* only allow 1 outgoing connection */, 2 /* allow up 2 channels to be used, 0 and 1 */, 57600 / 8 /* 56K modem with 56 Kbps downstream bandwidth */, 14400 / 8 /* 56K modem with 14 Kbps upstream bandwidth */); if (client == NULL) { fprintf (stderr, "An error occurred while trying to create an ENet client host.\n"); exit (EXIT_FAILURE); } /* Connect to some.server.net:1234. */ enet_address_set_host (& address, "192.168.2.13"); address.port = 1721; /* Initiate the connection, allocating the two channels 0 and 1. */ peer = enet_host_connect (client, & address, 2, 0); if (peer == NULL) { fprintf (stderr, "No available peers for initiating an ENet connection.\n"); exit (EXIT_FAILURE); } /* Wait up to 5 seconds for the connection attempt to succeed. */ if (enet_host_service (client, & event, 20000) > 0 && event.type == ENET_EVENT_TYPE_CONNECT) { std::cout << "Connection to some.server.net:1234 succeeded." << std::endl; } else { /* Either the 5 seconds are up or a disconnect event was */ /* received. Reset the peer in the event the 5 seconds */ /* had run out without any significant event. */ enet_peer_reset (peer); puts ("Connection to some.server.net:1234 failed."); } } void daLoop() { ENetPacket* packet; /* Create a reliable packet of size 7 containing "packet\0" */ packet = enet_packet_create ("backet", strlen ("backet") + 1, ENET_PACKET_FLAG_RELIABLE); /* Extend the packet so and append the string "foo", so it now */ /* contains "packetfoo\0" */ enet_packet_resize (packet, strlen ("backetfoo") + 1); strcpy ((char*)& packet -> data [strlen ("backet")], "foo"); /* Send the packet to the peer over channel id 0. */ /* One could also broadcast the packet by */ /* enet_host_broadcast (host, 0, packet); */ enet_peer_send (event.peer, 0, packet); /* One could just use enet_host_service() instead. */ enet_host_flush (client); while(true) { /* Wait up to 1000 milliseconds for an event. */ while (enet_host_service (client, & event, 1000) > 0) { ENetPacket * packet; switch (event.type) { case ENET_EVENT_TYPE_RECEIVE: printf ("A packet of length %u containing %s was received from %s on channel %u.\n", event.packet -> dataLength, event.packet -> data, event.peer -> data, event.channelID); /* Clean up the packet now that we're done using it. */ enet_packet_destroy (event.packet); break; } } } } ~Client() { atexit (enet_deinitialize); } }; int main() { std::string a; std::cin >> a; if(a == "host") { Host host; host.daLoop(); } else { Client c; c.daLoop(); } return 0; } I looked at some socket tutorials and they seemed a bit too low level. I just need something that abstracts away the platform (eg, no WINSOCKS) and that has basic ability to keep track of connected clients and send them messages. Thanks

  Read the article

• J2EE Applications, SPARC T4, Solaris Containers, and Resource Pools

  - by user12620111

  I've obtained a substantial performance improvement on a SPARC T4-2 Server running a J2EE Application Server Cluster by deploying the cluster members into Oracle Solaris Containers and binding those containers to cores of the SPARC T4 Processor. This is not a surprising result, in fact, it is consistent with other results that are available on the Internet. See the "references", below, for some examples. Nonetheless, here is a summary of my configuration and results. (1.0) Before deploying a J2EE Application Server Cluster into a virtualized environment, many decisions need to be made. I'm not claiming that all of the decisions that I have a made will work well for every environment. In fact, I'm not even claiming that all of the decisions are the best possible for my environment. I'm only claiming that of the small sample of configurations that I've tested, this is the one that is working best for me. Here are some of the decisions that needed to be made: (1.1) Which virtualization option? There are several virtualization options and isolation levels that are available. Options include: Hard partitions:  Dynamic Domains on Sun SPARC Enterprise M-Series Servers Hypervisor based virtualization such as Oracle VM Server for SPARC (LDOMs) on SPARC T-Series Servers OS Virtualization using Oracle Solaris Containers Resource management tools in the Oracle Solaris OS to control the amount of resources an application receives, such as CPU cycles, physical memory, and network bandwidth. Oracle Solaris Containers provide the right level of isolation and flexibility for my environment. To borrow some words from my friends in marketing, "The SPARC T4 processor leverages the unique, no-cost virtualization capabilities of Oracle Solaris Zones"  (1.2) How to associate Oracle Solaris Containers with resources? There are several options available to associate containers with resources, including (a) resource pool association (b) dedicated-cpu resources and (c) capped-cpu resources. I chose to create resource pools and associate them with the containers because I wanted explicit control over the cores and virtual processors.  (1.3) Cluster Topology? Is it best to deploy (a) multiple application servers on one node, (b) one application server on multiple nodes, or (c) multiple application servers on multiple nodes? After a few quick tests, it appears that one application server per Oracle Solaris Container is a good solution. (1.4) Number of cluster members to deploy? I chose to deploy four big 64-bit application servers. I would like go back a test many 32-bit application servers, but that is left for another day. (2.0) Configuration tested. (2.1) I was using a SPARC T4-2 Server which has 2 CPU and 128 virtual processors. To understand the physical layout of the hardware on Solaris 10, I used the OpenSolaris psrinfo perl script available at http://hub.opensolaris.org/bin/download/Community+Group+performance/files/psrinfo.pl: test# ./psrinfo.pl -pv The physical processor has 8 cores and 64 virtual processors (0-63) The core has 8 virtual processors (0-7)   The core has 8 virtual processors (8-15)   The core has 8 virtual processors (16-23)   The core has 8 virtual processors (24-31)   The core has 8 virtual processors (32-39)   The core has 8 virtual processors (40-47)   The core has 8 virtual processors (48-55)   The core has 8 virtual processors (56-63)     SPARC-T4 (chipid 0, clock 2848 MHz) The physical processor has 8 cores and 64 virtual processors (64-127)   The core has 8 virtual processors (64-71)   The core has 8 virtual processors (72-79)   The core has 8 virtual processors (80-87)   The core has 8 virtual processors (88-95)   The core has 8 virtual processors (96-103)   The core has 8 virtual processors (104-111)   The core has 8 virtual processors (112-119)   The core has 8 virtual processors (120-127)     SPARC-T4 (chipid 1, clock 2848 MHz) (2.2) The "before" test: without processor binding. I started with a 4-member cluster deployed into 4 Oracle Solaris Containers. Each container used a unique gigabit Ethernet port for HTTP traffic. The containers shared a 10 gigabit Ethernet port for JDBC traffic. (2.3) The "after" test: with processor binding. I ran one application server in the Global Zone and another application server in each of the three non-global zones (NGZ):  (3.0) Configuration steps. The following steps need to be repeated for all three Oracle Solaris Containers. (3.1) Stop AppServers from the BUI. (3.2) Stop the NGZ. test# ssh test-z2 init 5 (3.3) Enable resource pools: test# svcadm enable pools (3.4) Create the resource pool: test# poolcfg -dc 'create pool pool-test-z2' (3.5) Create the processor set: test# poolcfg -dc 'create pset pset-test-z2' (3.6) Specify the maximum number of CPU's that may be addd to the processor set: test# poolcfg -dc 'modify pset pset-test-z2 (uint pset.max=32)' (3.7) bash syntax to add Virtual CPUs to the processor set: test# (( i = 64 )); while (( i < 96 )); do poolcfg -dc "transfer to pset pset-test-z2 (cpu $i)"; (( i = i + 1 )) ; done (3.8) Associate the resource pool with the processor set: test# poolcfg -dc 'associate pool pool-test-z2 (pset pset-test-z2)' (3.9) Tell the zone to use the resource pool that has been created: test# zonecfg -z test-z1 set pool=pool-test-z2 (3.10) Boot the Oracle Solaris Container test# zoneadm -z test-z2 boot (3.11) Save the configuration to /etc/pooladm.conf test# pooladm -s (4.0) Results. Using the resource pools improves both throughput and response time: (5.0) References: System Administration Guide: Oracle Solaris Containers-Resource Management and Oracle Solaris Zones Capitalizing on large numbers of processors with WebSphere Portal on Solaris WebSphere Application Server and T5440 (Dileep Kumar's Weblog)  http://www.brendangregg.com/zones.html Reuters Market Data System, RMDS 6 Multiple Instances (Consolidated), Performance Test Results in Solaris, Containers/Zones Environment on Sun Blade X6270 by Amjad Khan, 2009.

  Read the article

• Using Sitecore RenderingContext Parameters as MVC controller action arguments

  - by Kyle Burns

  I have been working with the Technical Preview of Sitecore 6.6 on a project and have been for the most part happy with the way that Sitecore (which truly is an MVC implementation unto itself) has been expanded to support ASP.NET MVC. That said, getting up to speed with the combined platform has not been entirely without stumbles and today I want to share one area where Sitecore could have really made things shine from the "it just works" perspective. A couple days ago I was asked by a colleague about the usage of the "Parameters" field that is defined on Sitecore's Controller Rendering data template. Based on the standard way that Sitecore handles a field named Parameters, I was able to deduce that the field expected key/value pairs separated by the "&" character, but beyond that I wasn't sure and didn't see anything from a documentation perspective to guide me, so it was time to dig and find out where the data in the field was made available. My first thought was that it would be really nice if Sitecore handled the parameters in this field consistently with the way that ASP.NET MVC handles the various parameter collections on the HttpRequest object and automatically maps them to parameters of the action method executing. Being the hopeful sort, I configured a name/value pair on one of my renderings, added a parameter with matching name to the controller action and fired up the bugger to see... that the parameter was not populated. Having established that the field's value was not going to be presented to me the way that I had hoped it would, the next assumption that I would work on was that Sitecore would handle this field similar to how they handle other similar data and would plug it into some ambient object that I could reference from within the controller method. After a considerable amount of guessing, testing, and cracking code open with Redgate's Reflector (a must-have companion to Sitecore documentation), I found that the most direct way to access the parameter was through the ambient RenderingContext object using code similar to: string myArgument = string.Empty; var rc = Sitecore.Mvc.Presentation.RenderingContext.CurrentOrNull; if (rc != null) {     var parms = rc.Rendering.Parameters;     myArgument = parms["myArgument"]; } At this point, we know how this field is used out of the box from Sitecore and can provide information from Sitecore's Content Editor that will be available when the controller action is executing, but it feels a little dirty. In order to properly test the action method I would have to do a lot of setup work and possible use an isolation framework such as Pex and Moles to get at a value that my action method is dependent upon. Notice I said that my method is dependent upon the value but in order to meet that dependency I've accepted another dependency upon Sitecore's RenderingContext.  I'm a big believer in, when possible, ensuring that any piece of code explicitly advertises dependencies using the method signature, so I found myself still wanting this to work the same as if the parameters were in the request route, querystring, or form by being able to add a myArgument parameter to the action method and have this parameter populated by the framework. Lucky for us, the ASP.NET MVC framework is extremely flexible and provides some easy to grok and use extensibility points. ASP.NET MVC is able to provide information from the request as input parameters to controller actions because it uses objects which implement an interface called IValueProvider and have been registered to service the application. The most basic statement of responsibility for an IValueProvider implementation is "I know about some data which is indexed by key. If you hand me the key for a piece of data that I know about I give you that data". When preparing to invoke a controller action, the framework queries registered IValueProvider implementations with the name of each method argument to see if the ValueProvider can supply a value for the parameter. (the rest of this post will assume you're working along and make a lot more sense if you do) Let's pull Sitecore out of the equation for a second to simplify things and create an extremely simple IValueProvider implementation. For this example, I first create a new ASP.NET MVC3 project in Visual Studio, selecting "Internet Application" and otherwise taking defaults (I'm assuming that anyone reading this far in the post either already knows how to do this or will need to take a quick run through one of the many available basic MVC tutorials such as the MVC Music Store). Once the new project is created, go to the Index action of HomeController.  This action sets a Message property on the ViewBag to "Welcome to ASP.NET MVC!" and invokes the View, which has been coded to display the Message. For our example, we will remove the hard coded message from this controller (although we'll leave it just as hard coded somewhere else - this is sample code). For the first step in our exercise, add a string parameter to the Index action method called welcomeMessage and use the value of this argument to set the ViewBag.Message property. The updated Index action should look like: public ActionResult Index(string welcomeMessage) {     ViewBag.Message = welcomeMessage;     return View(); } This represents the entirety of the change that you will make to either the controller or view.  If you run the application now, the home page will display and no message will be presented to the user because no value was supplied to the Action method. Let's now write a ValueProvider to ensure this parameter gets populated. We'll start by creating a new class called StaticValueProvider. When the class is created, we'll update the using statements to ensure that they include the following: using System.Collections.Specialized; using System.Globalization; using System.Web.Mvc; With the appropriate using statements in place, we'll update the StaticValueProvider class to implement the IValueProvider interface. The System.Web.Mvc library already contains a pretty flexible dictionary-like implementation called NameValueCollectionValueProvider, so we'll just wrap that and let it do most of the real work for us. The completed class looks like: public class StaticValueProvider : IValueProvider {     private NameValueCollectionValueProvider _wrappedProvider;     public StaticValueProvider(ControllerContext controllerContext)     {         var parameters = new NameValueCollection();         parameters.Add("welcomeMessage", "Hello from the value provider!");         _wrappedProvider = new NameValueCollectionValueProvider(parameters, CultureInfo.InvariantCulture);     }     public bool ContainsPrefix(string prefix)     {         return _wrappedProvider.ContainsPrefix(prefix);     }     public ValueProviderResult GetValue(string key)     {         return _wrappedProvider.GetValue(key);     } } Notice that the only entry in the collection matches the name of the argument to our HomeController's Index action.  This is the important "secret sauce" that will make things work. We've got our new value provider now, but that's not quite enough to be finished. Mvc obtains IValueProvider instances using factories that are registered when the application starts up. These factories extend the abstract ValueProviderFactory class by initializing and returning the appropriate implementation of IValueProvider from the GetValueProvider method. While I wouldn't do so in production code, for the sake of this example, I'm going to add the following class definition within the StaticValueProvider.cs source file: public class StaticValueProviderFactory : ValueProviderFactory {     public override IValueProvider GetValueProvider(ControllerContext controllerContext)     {         return new StaticValueProvider(controllerContext);     } } Now that we have a factory, we can register it by adding the following line to the end of the Application_Start method in Global.asax.cs: ValueProviderFactories.Factories.Add(new StaticValueProviderFactory()); If you've done everything right to this point, you should be able to run the application and be presented with the home page reading "Hello from the value provider!". Now that you have the basics of the IValueProvider down, you have everything you need to enhance your Sitecore MVC implementation by adding an IValueProvider that exposes values from the ambient RenderingContext's Parameters property. I'll provide the code for the IValueProvider implementation (which should look VERY familiar) and you can use the work we've already done as a reference to create and register the factory: public class RenderingContextValueProvider : IValueProvider {     private NameValueCollectionValueProvider _wrappedProvider = null;     public RenderingContextValueProvider(ControllerContext controllerContext)     {         var collection = new NameValueCollection();         var rc = RenderingContext.CurrentOrNull;         if (rc != null && rc.Rendering != null)         {             foreach(var parameter in rc.Rendering.Parameters)             {                 collection.Add(parameter.Key, parameter.Value);             }         }         _wrappedProvider = new NameValueCollectionValueProvider(collection, CultureInfo.InvariantCulture);         }     public bool ContainsPrefix(string prefix)     {         return _wrappedProvider.ContainsPrefix(prefix);     }     public ValueProviderResult GetValue(string key)     {         return _wrappedProvider.GetValue(key);     } } In this post I've discussed the MVC IValueProvider used to map data to controller action method arguments and how this can be integrated into your Sitecore 6.6 MVC solution.

  Read the article

• Using Open MQ as an Oracle CEP Event Source

  - by seth.white

  I helped an Oracle CEP customer recently who wanted to use Open MQ has an event source for their Oracle CEP application.  In this case, the Oracle CEP application was being used to provide monitoring for an electronic commerce website, however, the steps for configuring Open MQ are entirely independent of the application logic. I thought I would list the configuration steps in a blog post in case they might help others in the future. Note that although the Oracle CEP documentation states that only WebLogic and Tibco JMS are "officially" supported, any JMS implementation that provides a Java client should work with Oracle CEP. The first step is to add an adapter to the application's EPN. This can be done in the usual way, using the Eclipse IDE. The end result is something like the following bit of configuration in the application's Spring application context. Note that the provider attribute value of 'jms-inbound' specifies that the out-of-the-box JMS adapter is being used. <wlevs:adapter id="helloworldAdapter" provider="jms-inbound"> </wlevs:adapter>   Next, configure the inbound adapter so that it can connect to Open MQ in the Oracle CEP configuration file (config.xml). The snippet below provides an example of what this configuration should look like. The exact values specified for jndi-provider-url, jndi-factory, connection-jndi-name, destination-jndi-name elements will depend on your Open MQ configuration.  For example , if the name of your Open MQ topic destination is 'ElectronicCommerceTopic', then you would specify that as the destination-jndi-name.  The name of your Open MQ connection factory goes in the connection-jndi-name element. In my simple example, I also specify in event-type element so that the out-of-the-box JMS adapter will attempt to automatically convert incoming messages to events of type HelloWorldEvent. In a more complex application, one would configure a custom converter on the JMS adapter to convert from messages to events.  The Oracle CEP 11.1.3 documentation describes how to do this.   <jms-adapter> <name>helloworldAdapter</name> <event-type>HelloWorldEvent</event-type> <jndi-provider-url>file:///C:/Temp</jndi-provider-url> <jndi-factory>com.sun.jndi.fscontext.RefFSContextFactory</jndi-factory> <connection-jndi-name>YourJMSConnectionFactoryName</connection-jndi-name> <destination-jndi-name>YourJMSDestinationName</destination-jndi-name> </jms-adapter>   Finally, one needs to package the client-side Open MQ jars so that the classes that they contain are available to the Oracle CEP runtime. The recommended way for doing this in the Oracle CEP 11.1.3 release is to package the classes as a library module or simply place them in the application bundle.  The advantage of deploying the classes as a library module is that they are available to any application that wants to connect to Open MQ. In my case, I packaged the classes in my application bundle. A best practice when you want to include additional jars in your application bundle is to create a 'lib' directory in your Eclipse project and then copy the required jars into that directory.  Then, use the support that Eclipse provides to add the jars to the bundle classpath (which makes the classes part of your application in the same way that regular application classes are), and export all of the classes from your application bundle so that they are available to the Oracle CEP server runtime.  The screenshot below Illustrates how this is done in Eclipse.  The bundle classpath contains two Open MQ jars and all packages in the jars are exported.     Finally, import the javax.jms and javax.naming packages into the application module as these are needed by the Open MQ classes. The screenshot below shows the complete list of package imports for my sample application.       Once you have completed these steps, you should be able to build and deploy your application and begin receiving inbound messages from Open MQ. Technorati Tags: CEP,JMS,Adapter,Open MQ,Eclipse .csharpcode { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { margin: 0em } .csharpcode .rem { color: #008000 } .csharpcode .kwrd { color: #0000ff } .csharpcode .str { color: #006080 } .csharpcode .op { color: #0000c0 } .csharpcode .preproc { color: #cc6633 } .csharpcode .asp { background-color: #ffff00 } .csharpcode .html { color: #800000 } .csharpcode .attr { color: #ff0000 } .csharpcode .alt { background-color: #f4f4f4; margin: 0em; width: 100% } .csharpcode .lnum { color: #606060 } .csharpcode { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { margin: 0em } .csharpcode .rem { color: #008000 } .csharpcode .kwrd { color: #0000ff } .csharpcode .str { color: #006080 } .csharpcode .op { color: #0000c0 } .csharpcode .preproc { color: #cc6633 } .csharpcode .asp { background-color: #ffff00 } .csharpcode .html { color: #800000 } .csharpcode .attr { color: #ff0000 } .csharpcode .alt { background-color: #f4f4f4; margin: 0em; width: 100% } .csharpcode .lnum { color: #606060 } .csharpcode { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { margin: 0em } .csharpcode .rem { color: #008000 } .csharpcode .kwrd { color: #0000ff } .csharpcode .str { color: #006080 } .csharpcode .op { color: #0000c0 } .csharpcode .preproc { color: #cc6633 } .csharpcode .asp { background-color: #ffff00 } .csharpcode .html { color: #800000 } .csharpcode .attr { color: #ff0000 } .csharpcode .alt { background-color: #f4f4f4; margin: 0em; width: 100% } .csharpcode .lnum { color: #606060 }

  Read the article

• What Makes a Good Design Critic? CHI 2010 Panel Review

  - by Applications User Experience

  Author: Daniel Schwartz, Senior Interaction Designer, Oracle Applications User Experience Oracle Applications UX Chief Evangelist Patanjali Venkatacharya organized and moderated an innovative and stimulating panel discussion titled "What Makes a Good Design Critic? Food Design vs. Product Design Criticism" at CHI 2010, the annual ACM Conference on Human Factors in Computing Systems. The panelists included Janice Rohn, VP of User Experience at Experian; Tami Hardeman, a food stylist; Ed Seiber, a restaurant architect and designer; Jonathan Kessler, a food critic and writer at the Atlanta Journal-Constitution; and Larry Powers, Chef de Cuisine at Shaun's restaurant in Atlanta, Georgia. Building off the momentum of his highly acclaimed panel at CHI 2009 on what interaction design can learn from food design (for which I was on the other side as a panelist), Venkatacharya brought together new people with different roles in the restaurant and software interaction design fields. The session was also quite delicious -- but more on that later. Criticism, as it applies to food and product or interaction design, was the tasty topic for this forum and showed that strong parallels exist between food and interaction design criticism. Figure 1. The panelists in discussion: (left to right) Janice Rohn, Ed Seiber, Tami Hardeman, and Jonathan Kessler. The panelists had great insights to share from their respective fields, and they enthusiastically discussed as if they were at a casual collegial dinner. Jonathan Kessler stated that he prefers to have one professional critic's opinion in general than a large sampling of customers, however, "Web sites like Yelp get users excited by the collective approach. People are attracted to things desired by so many." Janice Rohn added that this collective desire was especially true for users of consumer products. Ed Seiber remarked that while people looked to the popular view for their target tastes and product choices, "professional critics like John [Kessler] still hold a big weight on public opinion." Chef Powers indicated that chefs take in feedback from all sources, adding, "word of mouth is very powerful. We also look heavily at the sales of the dishes to see what's moving; what's selling and thus successful." Hearing this discussion validates our design work at Oracle in that we listen to our users (our diners) and industry feedback (our critics) to ensure an optimal user experience of our products. Rohn considers that restaurateur Danny Meyer's book, Setting the Table: The Transforming Power of Hospitality in Business, which is about creating successful restaurant experiences, has many applicable parallels to user experience design. Meyer actually argues that the customer is not always right, but that "they must always feel heard." Seiber agreed, but noted "customers are not designers," and while designers need to listen to customer feedback, it is the designer's job to synthesize it. Seiber feels it's the critic's job to point out when something is missing or not well-prioritized. In interaction design, our challenges are quite similar, if not parallel. Software tasks are like puzzles that are in search of a solution on how to be best completed. As a food stylist, Tami Hardeman has the demanding and challenging task of presenting food to be as delectable as can be. To present food in its best light requires a lot of creativity and insight into consumer tastes. It's no doubt then that this former fashion stylist came up with the ultimate catch phrase to capture the emotion that clients want to draw from their users: "craveability." The phrase was a hit with the audience and panelists alike. Sometime later in the discussion, Seiber remarked, "designers strive to apply craveability to products, and I do so for restaurants in my case." Craveabilty is also very applicable to interaction design. Creating straightforward and smooth workflows for users of Oracle Applications is a primary goal for my colleagues. We want our users to really enjoy working with our products where it makes them more efficient and better at their jobs. That's our "craveability." Patanjali Venkatacharya asked the panel, "if a design's "craveability" appeals to some cultures but not to others, then what is the impact to the food or product design process?" Rohn stated that "taste is part nature and part nurture" and that the design must take the full context of a product's usage into consideration. Kessler added, "good design is about understanding the context" that the experience necessitates. Seiber remarked how important seat comfort is for diners and how the quality of seating will add so much to the complete dining experience. Sometimes if these non-food factors are not well executed, they can also take away from an otherwise pleasant dining experience. Kessler recounted a time when he was dining at a restaurant that actually had very good food, but the photographs hanging on all the walls did not fit in with the overall décor and created a negative overall dining experience. While the tastiness of the food is critical to a restaurant's success, it is a captivating complete user experience, as in interaction design, which will keep customers coming back and ultimately making the restaurant a hit. Figure 2. Patnajali Venkatacharya enjoyed the Sardian flatbread salad. As a surprise Chef Powers brought out a signature dish from Shaun's restaurant for all the panelists to sample and critique. The Sardinian flatbread dish showcased Atlanta's taste for fresh and local produce and cheese at its finest as a salad served on a crispy flavorful flat bread. Hardeman said it could be photographed from any angle, a high compliment coming from a food stylist. Seiber really enjoyed the colors that the dish brought together and thought it would be served very well in a casual restaurant on a summer's day. The panel really appreciated the taste and quality of the different components and how the rosemary brought all the flavors together. Seiber remarked that "a lot of effort goes into the appearance of simplicity." Rohn indicated that the same notion holds true with software user interface design. A tremendous amount of work goes into crafting straightforward interfaces, including user research, prototyping, design iterations, and usability studies. Design criticism for food and software interfaces clearly share many similarities. Both areas value expert opinions and user feedback. Both areas understand the importance of great design needing to work well in its context. Last but not least, both food and interaction design criticism value "craveability" and how having users excited about experiencing and enjoying the designs is an important goal. Now if we can just improve the taste of software user interfaces, people may choose to dine on their enterprise applications over a fresh organic salad.

  Read the article

• WebSocket Applications using Java: JSR 356 Early Draft Now Available (TOTD #183)

  - by arungupta

  WebSocket provide a full-duplex and bi-directional communication protocol over a single TCP connection. JSR 356 is defining a standard API for creating WebSocket applications in the Java EE 7 Platform. This Tip Of The Day (TOTD) will provide an introduction to WebSocket and how the JSR is evolving to support the programming model. First, a little primer on WebSocket! WebSocket is a combination of IETF RFC 6455 Protocol and W3C JavaScript API (still a Candidate Recommendation). The protocol defines an opening handshake and data transfer. The API enables Web pages to use the WebSocket protocol for two-way communication with the remote host. Unlike HTTP, there is no need to create a new TCP connection and send a chock-full of headers for every message exchange between client and server. The WebSocket protocol defines basic message framing, layered over TCP. Once the initial handshake happens using HTTP Upgrade, the client and server can send messages to each other, independent from the other. There are no pre-defined message exchange patterns of request/response or one-way between client and and server. These need to be explicitly defined over the basic protocol. The communication between client and server is pretty symmetric but there are two differences: A client initiates a connection to a server that is listening for a WebSocket request. A client connects to one server using a URI. A server may listen to requests from multiple clients on the same URI. Other than these two difference, the client and server behave symmetrically after the opening handshake. In that sense, they are considered as "peers". After a successful handshake, clients and servers transfer data back and forth in conceptual units referred as "messages". On the wire, a message is composed of one or more frames. Application frames carry payload intended for the application and can be text or binary data. Control frames carry data intended for protocol-level signaling. Now lets talk about the JSR! The Java API for WebSocket is worked upon as JSR 356 in the Java Community Process. This will define a standard API for building WebSocket applications. This JSR will provide support for: Creating WebSocket Java components to handle bi-directional WebSocket conversations Initiating and intercepting WebSocket events Creation and consumption of WebSocket text and binary messages The ability to define WebSocket protocols and content models for an application Configuration and management of WebSocket sessions, like timeouts, retries, cookies, connection pooling Specification of how WebSocket application will work within the Java EE security model Tyrus is the Reference Implementation for JSR 356 and is already integrated in GlassFish 4.0 Promoted Builds. And finally some code! The API allows to create WebSocket endpoints using annotations and interface. This TOTD will show a simple sample using annotations. A subsequent blog will show more advanced samples. A POJO can be converted to a WebSocket endpoint by specifying @WebSocketEndpoint and @WebSocketMessage. @WebSocketEndpoint(path="/hello")public class HelloBean {     @WebSocketMessage    public String sayHello(String name) {         return "Hello " + name + "!";     }} @WebSocketEndpoint marks this class as a WebSocket endpoint listening at URI defined by the path attribute. The @WebSocketMessage identifies the method that will receive the incoming WebSocket message. This first method parameter is injected with payload of the incoming message. In this case it is assumed that the payload is text-based. It can also be of the type byte[] in case the payload is binary. A custom object may be specified if decoders attribute is specified in the @WebSocketEndpoint. This attribute will provide a list of classes that define how a custom object can be decoded. This method can also take an optional Session parameter. This is injected by the runtime and capture a conversation between two endpoints. The return type of the method can be String, byte[] or a custom object. The encoders attribute on @WebSocketEndpoint need to define how a custom object can be encoded. The client side is an index.jsp with embedded JavaScript. The JSP body looks like: <div style="text-align: center;"> <form action="">     <input onclick="say_hello()" value="Say Hello" type="button">         <input id="nameField" name="name" value="WebSocket" type="text"><br>    </form> </div> <div id="output"></div> The code is relatively straight forward. It has an HTML form with a button that invokes say_hello() method and a text field named nameField. A div placeholder is available for displaying the output. Now, lets take a look at some JavaScript code: <script language="javascript" type="text/javascript"> var wsUri = "ws://localhost:8080/HelloWebSocket/hello";     var websocket = new WebSocket(wsUri);     websocket.onopen = function(evt) { onOpen(evt) };     websocket.onmessage = function(evt) { onMessage(evt) };     websocket.onerror = function(evt) { onError(evt) };     function init() {         output = document.getElementById("output");     }     function say_hello() {      websocket.send(nameField.value);         writeToScreen("SENT: " + nameField.value);     } This application is deployed as "HelloWebSocket.war" (download here) on GlassFish 4.0 promoted build 57. So the WebSocket endpoint is listening at "ws://localhost:8080/HelloWebSocket/hello". A new WebSocket connection is initiated by specifying the URI to connect to. The JavaScript API defines callback methods that are invoked when the connection is opened (onOpen), closed (onClose), error received (onError), or a message from the endpoint is received (onMessage). The client API has several send methods that transmit data over the connection. This particular script sends text data in the say_hello method using nameField's value from the HTML shown earlier. Each click on the button sends the textbox content to the endpoint over a WebSocket connection and receives a response based upon implementation in the sayHello method shown above. How to test this out ? Download the entire source project here or just the WAR file. Download GlassFish4.0 build 57 or later and unzip. Start GlassFish as "asadmin start-domain". Deploy the WAR file as "asadmin deploy HelloWebSocket.war". Access the application at http://localhost:8080/HelloWebSocket/index.jsp. After clicking on "Say Hello" button, the output would look like: Here are some references for you: WebSocket - Protocol and JavaScript API JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) Subsequent blogs will discuss the following topics (not necessary in that order) ... Binary data as payload Custom payloads using encoder/decoder Error handling Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API Capturing WebSocket on-the-wire messages

  Read the article

• CodePlex Daily Summary for Friday, August 22, 2014

  CodePlex Daily Summary for Friday, August 22, 2014Popular ReleasesQuickMon: Version 3.22: This release add two important changes. 1. Config variables at the monitor pack level (global to entire monitor pack for all Collectors) 2. The QuickMon (Windows) service now automatically reloads monitor packs that have been changed since it was started. This means you don't have to restart the service for changes to take effect.SSIS ReportGeneratorTask: ReportGenerator Task 1.8: New version of the SSIS Report Generator Task that supports SQL Server 2008, 2012 and 2014. In addition to minor bug fixes Multi-Value Parameters and Execution Information were integrated. The complete variable and parameter assignment is now a string and can be set dynamically.Corefig for Windows Server 2012 Core and Hyper-V Server 2012: Corefig 1.1.2 ISO: FixesUpdated Hyper-V scripts to use version 2 of the WMI tree. Updated the Hyper-V check for saved VM to look for the proper identifier. Fixed text issues with the licensing tab (thanks to briangw for rooting this problem out). EnhancementsNew (and improved) version number in Corefig.psd1.Outlook 2013 Backup Add-In: Outlook Backup Add-In 1.3: Changelog for new version: Added button in config-window to reset the last backup-time (this will trigger the backup after closing outlook) Minimum interval set to 0 (backup at each closing of outlook) Catch exception when data store entry is corrupt Added two parameters (prefix and suffix) to automatically rename the backup file Updated VSTO-Runtime to 10.0.50325 Upgraded project to Visual Studio 2013 Added optional command to run after backup (e.g. pack backup files, ...) Add...babelua: 1.6.7.0: V1.6.7.0 - 2014.8.21New feature: add a file search window ( ctrl+1 or ALT+L ), like The file search in VC Assistant; Stability improvement: performance improvement when BabeLua load/unload; performance improvement when debugger load lua files;File Explorer for WPF: FileExplorer3_20August2014: Please see Aug14 Update.Open NFe: RDI Open NFe 3.0 (alpha): Atualização para o layout 3.10 da NFe.ODBC Connect: v1.0: ODBC Connect executables for both 32bit and 64bit ODBC data sourcesMSSQL Deployment Tool: Microsoft SQL Deploy Tool v1.3.1: MicrosoftSqlDeployTool: v1.3.1.38348 What's changed? Update namespace and assembly name. Bug fixing.SharePoint 2013 Search Query Tool: SharePoint 2013 Search Query Tool v2.1: Layout improvements Bug fixes Stores auth method and user name Moved experimental settings to Advanced boxCtrlAltStudio Viewer: CtrlAltStudio Viewer 1.2.2.41183 Alpha: This alpha of the CtrlAltStudio Viewer provides some preliminary Oculus Rift DK2 support. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-2-2-41183-alpha Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or supported by Linden Lab, the makers of Second Life.HDD Guardian: HDD Guardian 0.6.1: New: package now include smartctl 6.3; Removed: standard notification e-mail. Now you have to set your mail server to send e-mail alerts; Bugfix: USB detection error; custom e-mail server settings issue; bottom panel displays a wrong ATA error count.VG-Ripper & PG-Ripper: VG-Ripper 2.9.62: changes NEW: Added Support for 'MadImage.org' links NEW: Added Support for 'ImgSpot.org' links NEW: Added Support for 'ImgClick.net' links NEW: Added Support for 'Imaaage.com' links NEW: Added Support for 'Image-Bugs.com' links NEW: Added Support for 'Pictomania.org' links NEW: Added Support for 'ImgDap.com' links NEW: Added Support for 'FileSpit.com' links FIXED: 'ImgSee.me' linksMagick.NET: Magick.NET 7.0.0.0001: Magick.NET linked with ImageMagick 7-Beta.CMake Tools for Visual Studio: CMake Tools for Visual Studio 1.2: This release adds the following new features and bug fixes from CMake Tools for Visual Studio 1.1: Added support for CMake 3.0. Added support for word completion. Added IntelliSense support for the CMAKEHOSTSYSTEM_INFORMATION command. Fixed syntax highlighting for tokens beginning with escape sequences. Fixed issue uninstalling CMake Tools for Visual Studio after Visual Studio has been uninstalled.GW2 Personal Assistant Overlay: GW2 Personal Assistant Overlay 1.1: Overview1.1 is the second 'stable' release of the GW2 Personal Assistant Overlay. This version includes just a couple of very minor features and some minor bug fixes. For details regarding installation, setup, and general use, see Documentation. Note: If you were using a previous version, you will probably want to copy over the following user settings files: GW2PAO.DungeonSettings.xml GW2PAO.EventSettings.xml GW2PAO.WvWSettings.xml GW2PAO.ZoneCompletionSettings.xml New FeaturesAdded new "No...Fluentx: Fluentx v1.5.3: Added few more extension methods.fastJSON: v2.1.2: 2.1.2 - bug fix circular referencesJPush.NET: JPush Server SDK 1.2.1 (For JPush V3): Assembly: 1.2.1.24728 JPush REST API Version: v3 JPush Documentation Reference .NET framework: v4.0 or above. Sample: class: JPushClientV3 2014 Augest 15th.SEToolbox: SEToolbox 01.043.008 Release 1: Changed ship/station names to use new DisplayName instead of Beacon/Antenna. Fixed issue with updated SE binaries 01.043.018 using new Voxel Material definitions.New Projects1thManage: GDT for erevery oneCreateProjectOnCodePlex: This is the first project for CoderCamps.HEAD FIRST C# LAB 1 : A DAY AT THE RACES: This has been provided for educational purposes and general discussion to improve coding practices associated with the resources detailed within Head First C#.Introduce Audit logging to your EF application using Repository & Unit of Work: Introduce Auditing in your application that uses Entity Framework by utilizing the Repository and Unit of Work design patterns.License Registration (C++): Allow to create demo version, activate or not a module.MS Word SharepointWiki Plugin: Scope of the Plugin is to enable a Post to a Sharepoint Wiki from within MS Word with Formatted Text and Images.Send My Zip: This app will help you to send the files were zipped then send the email about password information. This project is currently in setup mode and only availablewinhttp: this is a project for http/https download.Wix Builder: WixBuilder focusses on easily generating a WiX script from a project ouput, compile and link it into msi installer using the WiX Toolset.XiamiSig: ????????。

  Read the article

• People, Process & Engagement: WebCenter Partner Keste

  - by Michael Snow

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Within the WebCenter group here at Oracle, discussions about people, process and engagement cross over many vertical industries and products. Amidst our growing partner ecosystem, the community provides us insight into great customer use cases every day. Such is the case with our partner, Keste, who provides us a guest post on our blog today with an overview of their innovative solution for a customer in the transportation industry. Keste is an Oracle software solutions and development company headquartered in Dallas, Texas. As a Platinum member of the Oracle® PartnerNetwork, Keste designs, develops and deploys custom solutions that automate complex business processes. Seamless Customer Self-Service Experience in the Trucking Industry with Oracle WebCenter Portal  Keste, Oracle Platinum Partner Customer Overview Omnitracs, Inc., a Qualcomm company provides mobility solutions for trucking fleets to companies in the transportation industry. Omnitracs’ mobility services include basic communications such as text as well as advanced monitoring services such as GPS tracking, temperature tracking of perishable goods, load tracking and weighting distribution, and many others. Customer Business Needs Already the leading provider of mobility solutions for large trucking fleets, they chose to target smaller trucking fleets as new customers. However their existing high-touch customer support method would not be a cost effective or scalable method to manage and service these smaller customers. Omnitracs needed to provide several self-service features to make customer support more scalable while keeping customer satisfaction levels high and the costs manageable. The solution also had to be very intuitive and easy to use. The systems that Omnitracs sells to these trucking customers require professional installation and smaller customers need to track and schedule the installation. Information captured in Oracle eBusiness Suite needed to be readily available for new customers to track these purchases and delivery details. Omnitracs wanted a high impact User Interface to significantly improve customer experience with the ability to integrate with EBS, provisioning systems as well as CRM systems that were already implemented. Omnitracs also wanted to build an architecture platform that could potentially be extended to other Portals. Omnitracs’ stated goal was to deliver an “eBay-like” or “Amazon-like” experience for all of their customers so that they could reach a much broader market beyond their large company customer base. Solution Overview In order to manage the increased complexity, the growing support needs of global customers and improve overall product time-to-market in a cost-effective manner, IT began to deliver a self-service model. This self service model not only transformed numerous business processes but is also allowing the business to keep up with the growing demands of the (internal and external) customers. This solution was a customer service Portal that provided self service capabilities for large and small customers alike for Activation of mobility products, managing add-on applications for the devices (much like the Apple App Store), transferring services when trucks are sold to other companies as well as deactivation all without the involvement of a call service agent or sending multiple emails to different Omnitracs contacts. This is a conceptual view of the Customer Portal showing the details of the components that make up the solution. 12.00 The portal application for transactions was entirely built using ADF 11g R2. Omnitracs’ business had a pressing requirement to have a portal available 24/7 for its customers. Since there were interactions with EBS in the back-end, the downtimes on the EBS would negate this availability. Omnitracs devised a decoupling strategy at the database side for the EBS data. The decoupling of the database was done using Oracle Data Guard and completely insulated the solution from any eBusiness Suite down time. The customer has no knowledge whether eBS is running or not. Here are two sample screenshots of the portal application built in Oracle ADF. Customer Benefits The Customer Portal not only provided the scalability to grow the business but also provided the seamless integration with other disparate applications. Some of the key benefits are: Improved Customer Experience: With a modern look and feel and a Portal that has the aspects of an App Store, the customer experience was significantly improved. Page response times went from several seconds to sub-second for all of the pages. Enabled new product launches: After successfully dominating the large fleet market, Omnitracs now has a scalable solution to sell and manage smaller fleet customers giving them a huge advantage over their nearest competitors. Dozens of new customers have been acquired via this portal through an onboarding process that now takes minutes Seamless Integrations Improves Customer Support: ADF 11gR2 allowed Omnitracs to bring a diverse list of applications into one integrated solution. This provided a seamless experience for customers to route them from Marketing focused application to a customer-oriented portal. Internally, it also allowed Sales Representatives to have an integrated flow for taking a prospect through the various steps to onboard them as a customer. Key integrations included: Unity Core Salesforce.com Merchant e-Solution for credit card Custom Omnitracs Applications like CUPS and AUTO Security utilizing OID and OVD Back end integration with EBS (Data Guard) and iQ Database Business Impact Significant business impacts were realized through the launch of customer portal. It not only allows the business to push through in underserved segments, but also reduces the time it needs to spend on customer support—allowing the business to focus more on sales and identifying the market for new products. Some of the Immediate Benefits are The entire onboarding process is now completely automated and now completes in minutes. This represents an 85% productivity improvement over their previous processes. And it was 160 times faster! With the success of this self-service solution, the business is now targeting about 3X customer growth in the next five years. This represents a tripling of their overall customer base and significant downstream revenue for the ongoing services. 90%+ improvement of customer onboarding and management process by utilizing, single sign on integration using OID/OAM solution, performance improvements and new self-service functionality Unified login for all Customers, Partners and Internal Users enables login to a common portal and seamless access to all other integrated applications targeted at the respective audience Significantly improved customer experience with a better look and feel with a more user experience focused Portal screens. Helped sales of the new product by having an easy way of ordering and activating the product. Data Guard helped increase availability of the Portal to 99%+ and make it independent of EBS downtime. This gave customers the feel of high availability of the portal application. Some of the anticipated longer term Benefits are: Platform that can be leveraged to launch any new product introduction and enable all product teams to reach new customers and new markets Easy integration with content management to allow business owners more control of the product catalog Overall reduced TCO with standardization of the Oracle platform Managed IT support cost savings through optimization of technology skills needed to support and modify this solution ------------------------------------------------------------ 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 -"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Times New Roman","serif";}

  Read the article

• Get Application Title from Windows Phone

  - by psheriff

  In a Windows Phone application that I am currently developing I needed to be able to retrieve the Application Title of the phone application. You can set the Deployment Title in the Properties of your Windows Phone Application, however getting to this value programmatically can be a little tricky. This article assumes that you have Visual Studio 2010 and the Windows Phone tools installed along with it. The Windows Phone tools must be downloaded separately and installed with Visual Studio2010. You may also download the free Visual Studio2010 Express for Windows Phone developer environment. The WMAppManifest.xml File First off you need to understand that when you set the Deployment Title in the Properties windows of your Windows Phone application, this title actually gets stored into an XML file located under the \Properties folder of your application. This XML file is named WMAppManifest.xml. A portion of this file is shown in the following listing. <?xml version="1.0" encoding="utf-8"?><Deployment  http://schemas.microsoft.com/windowsphone/2009/deployment"http://schemas.microsoft.com/windowsphone/2009/deployment"  AppPlatformVersion="7.0">  <App xmlns=""       ProductID="{71d20842-9acc-4f2f-b0e0-8ef79842ea53}"       Title="Mobile Time Track"       RuntimeType="Silverlight"       Version="1.0.0.0"       Genre="apps.normal"       Author="PDSA, Inc."       Description="Mobile Time Track"       Publisher="PDSA, Inc."> ... ...  </App></Deployment> Notice the “Title” attribute in the <App> element in the above XML document. This is the value that gets set when you modify the Deployment Title in your Properties Window of your Phone project. The only value you can set from the Properties Window is the Title. All of the other attributes you see here must be set by going into the XML file and modifying them directly. Note that this information duplicates some of the information that you can also set from the Assembly Information… button in the Properties Window. Why Microsoft did not just use that information, I don’t know. Reading Attributes from WMAppManifest I searched all over the namespaces and classes within the Windows Phone DLLs and could not find a way to read the attributes within the <App> element. Thus, I had to resort to good old fashioned XML processing. First off I created a WinPhoneCommon class and added two static methods as shown in the snippet below: public class WinPhoneCommon{  /// <summary>  /// Returns the Application Title   /// from the WMAppManifest.xml file  /// </summary>  /// <returns>The application title</returns>  public static string GetApplicationTitle()  {    return GetWinPhoneAttribute("Title");  }   /// <summary>  /// Returns the Application Description   /// from the WMAppManifest.xml file  /// </summary>  /// <returns>The application description</returns>  public static string GetApplicationDescription()  {    return GetWinPhoneAttribute("Description");  }   ... GetWinPhoneAttribute method here ...} In your Windows Phone application you can now simply call WinPhoneCommon.GetApplicationTitle() or WinPhone.GetApplicationDescription() to retrieve the Title or Description properties from the WMAppManifest.xml file respectively. You notice that each of these methods makes a call to the GetWinPhoneAttribute method. This method is shown in the following code snippet: /// <summary>/// Gets an attribute from the Windows Phone WMAppManifest.xml file/// To use this method, add a reference to the System.Xml.Linq DLL/// </summary>/// <param name="attributeName">The attribute to read</param>/// <returns>The Attribute's Value</returns>private static string GetWinPhoneAttribute(string attributeName){  string ret = string.Empty;   try  {    XElement xe = XElement.Load("WMAppManifest.xml");    var attr = (from manifest in xe.Descendants("App")                select manifest).SingleOrDefault();    if (attr != null)      ret = attr.Attribute(attributeName).Value;  }  catch  {    // Ignore errors in case this method is called    // from design time in VS.NET  }   return ret;} I love using the new LINQ to XML classes contained in the System.Xml.Linq.dll. When I did a Bing search the only samples I found for reading attribute information from WMAppManifest.xml used either an XmlReader or XmlReaderSettings objects. These are fine and work, but involve a little extra code. Instead of using these, I added a reference to the System.Xml.Linq.dll, then added two using statements to the top of the WinPhoneCommon class: using System.Linq;using System.Xml.Linq; Now, with just a few lines of LINQ to XML code you can read to the App element and extract the appropriate attribute that you pass into the GetWinPhoneAttribute method. Notice that I added a little bit of exception handling code in this method. I ignore the exception in case you call this method in the Loaded event of a user control. In design-time you cannot access the WMAppManifest file and thus an exception would be thrown. Summary In this article you learned how to retrieve the attributes from the WMAppManifest.xml file. I use this technique to grab information that I would otherwise have to hard-code in my application. Getting the Title or Description for your Windows Phone application is easy with just a little bit of LINQ to XML code. NOTE: You can download the complete sample code at my website. http://www.pdsa.com/downloads. Choose Tips & Tricks, then "Get Application Title from Windows Phone" from the drop-down. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free video on Silverlight entitled Silverlight XAML for the Complete Novice - Part 1.  

  Read the article

• CodePlex Daily Summary for Monday, October 31, 2011

  CodePlex Daily Summary for Monday, October 31, 2011Popular ReleasesWindows Workflow Foundation on Codeplex: Microsoft.Activities v1.8.8: Microsoft.Activities Overview How do I install Microsoft.Activities? Updates in this release9318Technical Analysis Engine for .NET: Technical Analysis Engine 1.24: New features in the 1.24 release: - Added MFI indicatorPROFIT: 1.1.0.102: Removed Attributes from agent and extensions Updated Modules with last data Added Elite T2 and T4 modules Modified sensor strength calculation to reflect ECCM module changesBF3Rcon.NET: BF3Rcon 3.0: This release is targeted for RCON documentation based on R3. Everything should be beta stable, but it's alpha because I haven't been able to fully test it. When a stable release is ready, a proper changelog will be kept. Important Edit: There's one method that will keep this from working in Mono. GeneratePasswordHash uses void HashAlgorithm.Dispose(), which isn't in Mono. This will have to be changed to Clear() in the next release. If anyone needs a Mono version of this immediately, you can...BoxWorld: BoxWorld_2011.10.30: BoxWorld - 8.0.1110.30 This is the initial release of BoxWorld. I'd recommend downloading the installer as it contains the compiled code and everything all nicely contained. By default, you end up with this directory structure: C:\Program Files\ViperWorks\BoxWorld C:\Program Files\ViperWorks\BoxWorld\Data C:\Program Files\ViperWorks\BoxWorld\Interface C:\Program Files\ViperWorks\BoxWorld\Source In the root you have the compiled EXE files, one for the main release, one for the LITE release ...VidCoder: 1.2.1: Fixed a couple regressions: video encoder was blank in queue and crashes with the High Profile preset when opening the Settings window. Fixed problem with auto-update introduced in 1.2.0. If you have 1.2.0 you will need to update manually to get this.Home Access Plus+: v7.6: This download now (31/10/11 6pm) includes the v7.6.1031.1800 patch Changes: New Download Routing Handler: Support for Pausing/Resuming Downloads Should fix OfficeOpenXML files when you download and it corrupts Update MyFiles ALPHA: Updated Layout of some elements on the tiles Details View Added with a table Update Booking System: Fixed some issues found since the v7.5 release Added support for spaces in Resource names Fixed some issues with the Booking System Admin page Added SI...Koober: Koober - The Ebook Creator 0.2: The official release of Koober as Open source. Koober is a ebook creator for Windows, and Koob Reader is the reader.patterns & practices: Enterprise Library Contrib: Enterprise Library Contrib - 5.0 (Oct 2011): This release of Enterprise Library Contrib is based on the Microsoft patterns & practices Enterprise Library 5.0 core and contains the following: Common extensionsTypeConfigurationElement<T> - A Polymorphic Configuration Element without having to be part of a PolymorphicConfigurationElementCollection. AnonymousConfigurationElement - A Configuration element that can be uniquely identified without having to define its name explicitly. Data Access Application Block extensionsMySql Provider - ...Network Monitor Open Source Parsers: Network Monitor Parsers 3.4.2748: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, NetowrkMonitor_Parsers.msi continues to improve quality and fix bugs. It has included the fo...WriteableBitmapEx: WriteableBitmapEx 0.9.8.5: Added a Rotate method for arbitrary angles (RotateFree). Provided by montago. See http://writeablebitmapex.codeplex.com/workitem/15214 Added Nokola's anti-aliased line drawing implementation. http://nokola.com/blog/post/2010/10/14/Anti-aliased-Lines-And-Optimizing-Code-for-Windows-Phone-7e28093First-Look.aspx Updated the Windows Phone project to WP 7.1 Mango. Added an extension file for the Windows Phone specific extensions and added the SaveToMediaLibrary extension including support fo...Duckworth Lewis Professional Edition Calculator: DLcalc 3.0: DLcalc 3.0 can perform Duckworth/Lewis Professional Edition calculations 100% accurately. It also produces over-by-over and ball-by-ball PAR score tables.Media Companion: MC 3.420b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movies Fixed: Fanart and poster scraping issues TV Shows (Re)Added: Rebuild single show Fixed: Issue when shows are moved from original location Ability to handle " for actor nicknames Crash when episode name contains "<" (does not scrape yet) Clears fanart when switch...patterns & practices - Unity: Unity 3.0 for .NET4.5 Preview: The Unity 3.0.1026.0 Preview enables Unity to work on .NET 4.5 with both the WinRT and desktop profiles. The major changes include: Unity projects updated to target .NET 4.5. Dynamic build plans modified to use compiled lambda expressions instead of Reflection.Emit Converting reflection to use the new TypeInfo for reflection. Projects updated to work with the Microsoft Visual Studio 2011 Preview Notes/Known Issues: The Microsoft.Practices.Unity.UnityServiceLocator class cannot be use...Managed Extensibility Framework: MEF 2 Preview 4: Detailed information on this release is available on the BCL team blog.AcDown????? - Anime&Comic Downloader: AcDown????? v3.6: ?? ● AcDown??????????、??????，??????????????????????，???????Acfun、Bilibili、???、???、???、Tucao.cc、SF???、?????80????，???????????、?????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ?? v3.6?? ??“????”...Path Copy Copy: 8.0: New version that mostly adds lots of requested features: 11340 11339 11338 11337 This version also features a more elaborate Settings UI that has several tabs. I tried to add some notes to better explain the use and purpose of the various options. The Path Copy Copy documentation is also on the way, both to explain how to develop custom plugins and to explain how to pre-configure options if you're a network admin. Stay tuned.MVC Controls Toolkit: Mvc Controls Toolkit 1.5.0: Added: The new Client Blocks feaure of Views A new "move" js method for the TreeViews The NewHtmlCreated js event to the DataGrid Improved the ChoiceList structure that now allows also the selection list of a dropdown to be chosen with a lambda expression Improved the AcceptViewHintAttribute controller filter. Now a client can specify not only the name of a View or Partial View it prefers, but also to receive just the rough data in Json format. Now the the SMinimum and SMaximum par...Free SharePoint Master Pages: Buried Alive (Halloween) Theme: Release Notes *Created for Halloween, you will find theme file, custom css file and images. *Created by Al Roome @AlstarRoome Features: Custom styling for web part Custom background *Screenshot https://s3.amazonaws.com/kkhipple/post/sharepoint-showcase-halloween.pngNicAudio: NicAudio 2.0.5: Minor change to accept special DTS stereo modes (LtRt, AB,...)New ProjectsagsXMPP-facebook: This is a fork of agsXMPP library (http://www.ag-software.de/agsxmpp-sdk/) that brings support for X-FACEBOOK-PLATFORM SASL mechanism. Tags: xmpp, facebook, chat, agsxmpp, .net, C#Azure Toss: With the booming of personal devices (such as iPad and Windows 8 tablets) and cloud-based services (such as Azure and iCloud), we are entering an era of highly connected yet very loosely coupled applications and services. As ISVs and application developers, you’ll find your applications need to communicate with many other applications and services in a “non-binding” way - there are no hard commitments among the applications and services to work together. Instead, services and features are dis...Backup MS Outlook: Console program to copy all active (usage) pst files from default Microsoft Outlook to backup folder. It's stripped down and modified version of the program backupmymail.codeplex.com. Program to copy file using VSS (Volume shadow service) through hobocopy(c) program.BoxWorld: Welcome to BoxWorld. Also known as Sokoban. This application/game was designed as an experiment really! I remember playing this game on my graphing calculator many years ago. And even with this, it's not so much as the game as it was making the game.com-binbin-reader: rss reader Priority Inbox Spam Custom CssLink control for the wiki pages of a SharePoint 2010 team site: Replace the native CssLink by this custom control for removing the OOTB RTE styles in a wiki page of SharePoint 2010 Foundation. This custom control wraps the native one in order to remove the link to the OOTB corev4.css that remains in the wiki pages while using an alternate CSS. Droppoint: Drop your file to sharepointEvents&Handlers: Implementing example for events and handlers in CLR via C#KIVA AIP for C# 4: A C#4 API implementation of the KIVA API found at http://build.kiva.org/apiKKScada: KKScada is a scada projectKoober: Koober is a .NET framework based visually appealing Ebook creator for Windows. It has a pre defined format using SQLite database as book files. Lighter: Text to Braille: Lighter is an extensible and flexible Thai/English and further language translation to Braille format.Lynx Toolkit: A collection of small command line developer tools.Michael's Code: this is michael's code.Passwords Thief: Sometimes you need to see what is behind asteriks in password edit box. It will help you to resolve this problem. PET@runtime: PET@runtime provides additional components to PET, especially for supporting PET outcomes at project execution time in several tools, e.g. Word or TFS.ProduzioneWebFlora: cascascaResources Over MVC: Resources Over MVC provides extensions for ASP.Net MVC to support the typical features of a REST web service. These include support for multiple representations, encodings and a number of ways of overloading POST. Regardless of your opinion of what makes a RESTful service, these can help.Servelat Pieces: Servelat Pieces is a collection of reusable bits of code that can make you Silverlight development easier. You'll be able to simplify the code which consumed server-side WCF services. It may greatly simplify your Sillverlight unit testing experience.Silverlight Sphere Control: This is a Silverlight spherical selection control that I built that uses the projection transformations in Silverlight. It includes several modes (including random, rows, columns, vertical carousel, horizontal carousel, and checkered) and events. Upon selecting one of the elements (which are arranged in a spherical pattern, hence the name), the sphere rotates until the control is at the front face of the sphere. Events are available to hook into (on element selected, rotation finished,...WinRT File Based Database: This database is based on a file system in Windows 8 and is using WinRT (Windows Runtime) in Windows 8 environment and thus can be used for Metro style applications. It includes simple, yet effective API that allows you to create tables based on classes. xianshihai--nothing to display: nothing to display

  Read the article

• ASP.NET WebAPI Security 5: JavaScript Clients

  - by Your DisplayName here!

  All samples I showed in my last post were in C#. Christian contributed another client sample in some strange language that is supposed to work well in browsers ;) JavaScript client scenarios There are two fundamental scenarios when it comes to JavaScript clients. The most common is probably that the JS code is originating from the same web application that also contains the web APIs. Think a web page that does some AJAX style callbacks to an API that belongs to that web app – Validation, data access etc. come to mind. Single page apps often fall in that category. The good news here is that this scenario just works. The typical course of events is that the user first logs on to the web application – which will result in an authentication cookie of some sort. That cookie will get round-tripped with your AJAX calls and ASP.NET does its magic to establish a client identity context. Since WebAPI inherits the security context from its (web) host, the client identity is also available here. The other fundamental scenario is JavaScript code *not* running in the context of the WebAPI hosting application. This is more or less just like a normal desktop client – either running in the browser, or if you think of Windows 8 Metro style apps as “real” desktop apps. In that scenario we do exactly the same as the samples did in my last post – obtain a token, then use it to call the service. Obtaining a token from IdentityServer’s resource owner credential OAuth2 endpoint could look like this: thinktectureIdentityModel.BrokeredAuthentication = function (stsEndpointAddress, scope) {     this.stsEndpointAddress = stsEndpointAddress;     this.scope = scope; }; thinktectureIdentityModel.BrokeredAuthentication.prototype = function () {     getIdpToken = function (un, pw, callback) {         $.ajax({             type: 'POST',             cache: false,             url: this.stsEndpointAddress,             data: { grant_type: "password", username: un, password: pw, scope: this.scope },             success: function (result) {                 callback(result.access_token);             },             error: function (error) {                 if (error.status == 401) {                     alert('Unauthorized');                 }                 else {                     alert('Error calling STS: ' + error.responseText);                 }             }         });     };     createAuthenticationHeader = function (token) {         var tok = 'IdSrv ' + token;         return tok;     };     return {         getIdpToken: getIdpToken,         createAuthenticationHeader: createAuthenticationHeader     }; } (); Calling the service with the requested token could look like this: function getIdentityClaimsFromService() {     authHeader = authN.createAuthenticationHeader(token);     $.ajax({         type: 'GET',         cache: false,         url: serviceEndpoint,         beforeSend: function (req) {             req.setRequestHeader('Authorization', authHeader);         },         success: function (result) {              $.each(result.Claims, function (key, val) {                 $('#claims').append($('<li>' + val.Value + '</li>'))             });         },         error: function (error) {             alert('Error: ' + error.responseText);         }     }); I updated the github repository, you can can play around with the code yourself.

  Read the article

• Using Apache FOP from .NET level

  - by Lukasz Kurylo

  In one of my previous posts I was talking about FO.NET which I was using to generate a pdf documents from XSL-FO. FO.NET is one of the .NET ports of Apache FOP. Unfortunatelly it is no longer maintained. I known it when I decidec to use it, because there is a lack of available (free) choices for .NET to render a pdf form XSL-FO. I hoped in this implementation I will find all I need to create a pdf file with my really simple requirements. FO.NET is a port from some old version of Apache FOP and I found really quickly that there is a lack of some features that I needed, like dotted borders, double borders or support for margins. So I started to looking for some alternatives. I didn’t try the NFOP, another port of Apache FOP, because I found something I think much more better, the IKVM.NET project.   IKVM.NET it is not a pdf renderer. So what it is? From the project site:   IKVM.NET is an implementation of Java for Mono and the Microsoft .NET Framework. It includes the following components: a Java Virtual Machine implemented in .NET a .NET implementation of the Java class libraries tools that enable Java and .NET interoperability   In the simplest form IKVM.NET allows to use a Java code library in the C# code and vice versa.   I tried to use an Apache FOP, the best I think open source pdf –> XSL-FO renderer written in Java from my project written in C# using an IKVM.NET and it work like a charm. In the rest of the post I want to show, how to prepare a .NET *.dll class library from Apache FOP *.jar’s with IKVM.NET and generate a simple Hello world pdf document.   To start playing with IKVM.NET and Apache FOP we need to download their packages: IKVM.NET Apache FOP and then unpack them.   From the FOP directory copy all the *.jar’s files from lib and build catalogs to some location, e.g. d:\fop. Second step is to build the *.dll library from these files. On the console execute the following comand:   ikvmc –target:library –out:d:\fop\fop.dll –recurse:d:\fop   The ikvmc is located in the bin subdirectory where you unpacked the IKVM.NET. You must execute this command from this catalog, add this path to the global variable PATH or specify the full path to the bin subdirectory.   In no error occurred during this process, the fop.dll library should be created. Right now we can create a simple project to test if we can create a pdf file.   So let’s create a simple console project application and add reference to the fop.dll and the IKVM dll’s: IKVM.OpenJDK.Core and IKVM.OpenJDK.XML.API.   Full code to generate a pdf file from XSL-FO template:   static void Main(string[] args)         {             //initialize the Apache FOP             FopFactory fopFactory = FopFactory.newInstance();               //in this stream we will get the generated pdf file             OutputStream o = new DotNetOutputMemoryStream();             try             {                 Fop fop = fopFactory.newFop("application/pdf", o);                 TransformerFactory factory = TransformerFactory.newInstance();                 Transformer transformer = factory.newTransformer();                   //read the template from disc                 Source src = new StreamSource(new File("HelloWorld.fo"));                 Result res = new SAXResult(fop.getDefaultHandler());                 transformer.transform(src, res);             }             finally             {                 o.close();             }             using (System.IO.FileStream fs = System.IO.File.Create("HelloWorld.pdf"))             {                 //write from the .NET MemoryStream stream to disc the generated pdf file                 var data = ((DotNetOutputMemoryStream)o).Stream.GetBuffer();                 fs.Write(data, 0, data.Length);             }             Process.Start("HelloWorld.pdf");             System.Console.ReadLine();         }   Apache FOP be default using a Java’s Xalan to work with XML files. I didn’t find a way to replace this piece of code with equivalent from .NET standard library. If any error or warning will occure during generating the pdf file, on the console will ge shown, that’s why I inserted the last line in the sample above. The DotNetOutputMemoryStream this is my wrapper for the Java OutputStream. I have created it to have the possibility to exchange data between the .NET <-> Java objects. It’s implementation:   class DotNetOutputMemoryStream : OutputStream     {         private System.IO.MemoryStream ms = new System.IO.MemoryStream();         public System.IO.MemoryStream Stream         {             get             {                 return ms;             }         }         public override void write(int i)         {             ms.WriteByte((byte)i);         }         public override void write(byte[] b, int off, int len)         {             ms.Write(b, off, len);         }         public override void write(byte[] b)         {             ms.Write(b, 0, b.Length);         }         public override void close()         {             ms.Close();         }         public override void flush()         {             ms.Flush();         }     } The last thing we need, this is the HelloWorld.fo template.   <?xml version="1.0" encoding="utf-8"?> <fo:root xmlns:fo="http://www.w3.org/1999/XSL/Format"          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">   <fo:layout-master-set>     <fo:simple-page-master master-name="simple"                   page-height="29.7cm"                   page-width="21cm"                   margin-top="1.8cm"                   margin-bottom="0.8cm"                   margin-left="1.6cm"                   margin-right="1.2cm">       <fo:region-body margin-top="3cm"/>       <fo:region-before extent="3cm"/>       <fo:region-after extent="1.5cm"/>     </fo:simple-page-master>   </fo:layout-master-set>   <fo:page-sequence master-reference="simple">     <fo:flow flow-name="xsl-region-body">       <fo:block font-size="18pt" color="black" text-align="center">         Hello, World!       </fo:block>     </fo:flow>   </fo:page-sequence> </fo:root>   I’m not going to explain how how this template is created, because this will be covered in the near future posts.   Generated pdf file should look that:

  Read the article

• AIX Checklist for stable obiee deployment

  - by user554629

  Common AIX configuration issues     ( last updated 27 Aug 2012 ) OBIEE is a complicated system with many moving parts and connection points.The purpose of this article is to provide a checklist to discuss OBIEE deployment with your systems administrators. The information in this article is time sensitive, and updated as I discover new  issues or details. What makes OBIEE different? When Tech Support suggests AIX component upgrades to a stable, locked-down production AIX environment, it is common to get "push back".  "Why is this necessary?  We aren't we seeing issues with other software?"It's a fair question that I have often struggled to answer; here are the talking points: OBIEE is memory intensive.  It is the entire purpose of the software to trade memory for repetitive, more expensive database requests across a network. OBIEE is implemented in C++ and is very dependent on the C++ runtime to behave correctly. OBIEE is aggressively thread efficient;  if atomic operations on a particular architecture do not work correctly, the software crashes. OBIEE dynamically loads third-party database client libraries directly into the nqsserver process.  If the library is not thread-safe, or corrupts process memory the OBIEE crash happens in an unrelated part of the code.  These are extremely difficult bugs to find. OBIEE software uses 99% common source across multiple platforms:  Windows, Linux, AIX, Solaris and HPUX.  If a crash happens on only one platform, we begin to suspect other factors.  load intensity, system differences, configuration choices, hardware failures.  It is rare to have a single product require so many diverse technical skills.   My role in support is to understand system configurations, performance issues, and crashes.   An analyst trained in Business Analytics can't be expected to know AIX internals in the depth required to make configuration choices.  Here are some guidelines. AIX C++ Runtime must be at  version 11.1.0.4$ lslpp -L | grep xlC.aixobiee software will crash if xlC.aix.rte is downlevel;  this is not a "try it" suggestion.Nov 2011 11.1.0.4 version  is appropriate for all AIX versions ( 5, 6, 7 )Download from here:https://www-304.ibm.com/support/docview.wss?uid=swg24031426 No reboot is necessary to install, it can even be installed while applications are using the current version.Restart the apps, and they will pick up the latest version. AIX 5.3 Technology Level 12 is required when running on Power5,6,7 processorsAIX 6.1 was introduced with the newer Power chips, and we have seen no issues with 6.1 or 7.1 versions.Customers with an unstable deployment, dozens of unexplained crashes, became stable after the upgrade.If your AIX system is 5.3, the minimum TL level should be at or higher than this:$ oslevel -s  5300-12-03-1107IBM typically supports only the two latest versions of AIX ( 6.1 and 7.1, for example).  AIX 5.3 is still supported and popular running in an LPAR. obiee userid limits$ ulimit -Ha  ( hard limits )$ ulimit -a   ( default limits )core file size (blocks)     unlimiteddata seg size (kbytes)      unlimitedfile size (blocks)          unlimitedmax memory size (kbytes)    unlimitedopen files                  10240 cpu time (seconds)          unlimitedvirtual memory (kbytes)     unlimitedIt is best to establish the values in /etc/security/limitsroot user is needed to observe and modify this file.If you modify a limit, you will need to relog in to change it again.  For example,$ ulimit -c 0$ ulimit -c 2097151cannot modify limit: Operation not permitted$ ulimit -c unlimited$ ulimit -c0There are only two meaningful values for ulimit -c ; zero or unlimited.Anything else is likely to produce a truncated core file that cannot be analyzed. Deploy 32-bit or 64-bit ?Early versions of OBIEE offered 32-bit or 64-bit choice to AIX customers.The 32-bit choice was needed if a database vendor did not supply a 64-bit client library.That's no longer an issue and beginning with OBIEE 11, 32-bit code is no longer shipped.A common error that leads to "out of memory" conditions to to accept the 32-bit memory configuration choices on 64-bit deployments.  The significant configuration choices are: Maximum process data (heap) size is in an AIX environment variableLDR_CNTRL=IGNOREUNLOAD@LOADPUBLIC@PREREAD_SHLIB@MAXDATA=0x... Two thread stack sizes are made in obiee NQSConfig.INI[ SERVER ]SERVER_THREAD_STACK_SIZE = 0;DB_GATEWAY_THREAD_STACK_SIZE = 0; Sort memory in NQSConfig.INI[ GENERAL ]SORT_MEMORY_SIZE = 4 MB ;SORT_BUFFER_INCREMENT_SIZE = 256 KB ; Choosing a value for MAXDATA:0x080000000  2GB Default maximum 32-bit heap size ( 8 with 7 zeros )0x100000000  4GB 64-bit breaking even with 32-bit ( 1 with 8 zeros )0x200000000  8GB 64-bit double 32-bit max0x400000000 16GB 64-bit safetyUsing 2GB heap size for a 64-bit process will almost certainly lead to an out-of-memory situation.Registers are twice as big ... consume twice as much memory in the heap.Upgrading to a 4GB heap for a 64-bit process is just "breaking even" with 32-bit.A 32-bit process is constrained by the 32-bit virtual addressing limits.  Heap memory is used for dynamic requirements of obiee software, thread stacks for each of the configured threads, and sometimes for shared libraries. 64-bit processes are not constrained in this way;  extra heap space can be configured for safety against a query that might create a sudden requirement for excessive storage.  If the storage is not available, this query might crash the whole server and disrupt existing users.There is no performance penalty on AIX for configuring more memory than required;  extra memory can be configured for safety.  If there are no other considerations, start with 8GB.Choosing a value for Thread Stack size:zero is the value documented to select an appropriate default for thread stack size.  My preference is to change this to an absolute value, even if you intend to use the documented default;  it provides better documentation and removes the "surprise" factor.There are two thread types that can be configured. GATEWAY is used by a thread pool to call a database client library to establish a DB connection.The default size is 256KB;  many customers raise this to 512KB ( no performance penalty for over-configuring ). This value must be set to 1 MB if Teradata connections are used. SERVER threads are used to run queries.  OBIEE uses recursive algorithms during the analysis of query structures which can consume significant thread stack storage.  It's difficult to provide guidance on a value that depends on data and complexity.  The general notion is to provide more space than you think you need,  "double down" and increase the value if you run out, otherwise inspect the query to understand why it is too complex for the thread stack.  There are protections built into the software to abort a single user query that is too complex, but the algorithms don't cover all situations.256 KB  The default 32-bit stack size.  Many customers increased this to 512KB on 32-bit.  A 64-bit server is very likely to crash with this value;  the stack contains mostly register values, which are twice as big.512 KB  The documented 64-bit default.  Some early releases of obiee didn't set this correctly, resulting in 256KB stacks.1 MB  The recommended 64-bit setting.  If your system only ever uses 512KB of stack space, there is no performance penalty for using 1MB stack size.2 MB  Many large customers use this value for safety.  No performance penalty.nqscheduler does not use the NQSConfig.INI file to set thread stack size.If this process crashes because the thread stack is too small, use this to set 2MB:export OBI_BACKGROUND_STACK_SIZE=2048 Shared libraries are not (shared) When application libraries are loaded at run-time, AIX makes a decision on whether to load the libraries in a "public" memory segment.  If the filesystem library permissions do not have the "Read-Other" permission bit, AIX loads the library into private process memory with two significant side-effects:* The libraries reduce the heap storage available.      Might be significant in 32-bit processes;  irrelevant in 64-bit processes.* Library code is loaded into multiple real pages for execution;  one copy for each process.Multiple execution images is a significant issue for both 32- and 64-bit processes.The "real memory pages" saved by using public memory segments is a minor concern.  Today's machines typically have plenty of real memory.The real problem with private copies of libraries is that they consume processor cache blocks, which are limited.   The same library instructions executing in different real pages will cause memory delays as the i-cache ( instruction cache 128KB blocks) are refreshed from real memory.   Performance loss because instructions are delayed is something that is difficult to measure without access to low-level cache fault data.   The machine just appears to be running slowly for no observable reason.This is an easy problem to detect, and an easy problem to correct.Detection:  "genld -l" AIX command produces a list of the libraries used by each process and the AIX memory address where they are loaded.32-bit public segment is 13 ( "dxxxxxxx" ).   private segments are 2-a.64-bit public segment is 9 ( "9xxxxxxxxxxxxxxx") ; private segment is 8.genld -l | grep -v ' d| 9' | sort +2provides a list of privately loaded libraries. Repair: chmod o+r <libname>AIX shared libraries will have a suffix of ".so" or ".a".Another technique is to change all libraries in a selected directory to repair those that might not be currently loaded.   The usual directories that need repair are obiee code, httpd code and plugins, database client libraries and java.chmod o+r /shr/dir/*.a /shr/dir/*.so Configure your system for diagnosticsProduction systems shouldn't crash, and yet bad things happen to good software.If obiee software crashes and produces a core, you should configure your system for reliable transfer of the failing conditions to Oracle Tech Support.  Here's what we need to be able to diagnose a core file from your system.* fullcore enabled. chdev -lsys0 -a fullcore=true* core naming enabled. chcore -n on -d* ulimit must not truncate core. see item 3.* pstack.sh is used to capture core documentation.* obidoc is used to capture current AIX configuration.* snapcore  AIX utility captures core and libraries. Use the proper syntax. $ snapcore -r corename executable-fullpath   /tmp/snapcore will contain the .pax.Z output file.  It is compressed.* If cores are directed to a common directory, ensure obiee userid can write to the directory.  ( chcore -p /cores -d ; chmod 777 /cores )The filesystem must have sufficient space to hold a crashing obiee application.Use:  df -k  Check the "Free" column ( not "% Used" )  8388608 is 8GB. Disable Oracle Client Library signal handlingThe Oracle DB Client Library is frequently distributed with the sqlplus development kit.By default, the library enables a signal handler, which will document a call stack if the application crashes.   The signal handler is not needed, and definitely disruptive to obiee diagnostics.   It needs to be disabled.   sqlnet.ora is typically located at:   $ORACLE_HOME/network/admin/sqlnet.oraAdd this line at the top of the file:   DIAG_SIGHANDLER_ENABLED=FALSE Disable async query in the RPD connection pool.This might be an obiee 10.1.3.4 issue only ( still checking  )."async query" must be disabled in the connection pools.It was designed to enable query cancellation to a database, and turned out to have too many edge conditions in normal communication that produced random corruption of data and crashes.  Please ensure it is turned off in the RPD. Check AIX error report (errpt).Errors external to obiee applications can trigger crashes.  $ /bin/errpt -aHardware errors ( firmware, adapters, disks ) should be reported to IBM support.All application core files are recorded by AIX;  the most recent ones are listed first. Reserved for something important to say.

  Read the article

< Previous Page | 474 475 476 477 478 479 480 481 482 483 484 485  | Next Page >