Search Results

Search found 15035 results on 602 pages for 'request'.

Page 478/602 | < Previous Page | 474 475 476 477 478 479 480 481 482 483 484 485  | Next Page >

• Having two IP Routes/Gateways of last Resort on an HP Switch

  - by SteadH

  We have an HP Layer 3 Switch that is doing IP routing between vlans. The general set up is that the switch has an IP address on each VLAN and IP routing is enabled. On our servers VLAN, we have a firewall that has a connection to the outside world. To set a IP route on the HP router, we use IOS command ip route 0.0.0.0 0.0.0.0 192.168.2.1 where 192.168.2.1 is the address of our firewall, and the zeros essentially mean to route all traffic that the switch doesn't know what to do with out the firewall as a gateway. We're in the middle of an ISP and firewall change. I set up the new firewall and ran the IOS command ip route 0.0.0.0 0.0.0.0 192.168.2.254 (the address of the new firewall). Things started working nicely. When I reviewed the configuration of the switch though, I noticed that it did not replace the previous ip route command, but just added another route. Now, I know how to remove the old firewall route (no ip route 0.0.0.0 0.0.0.0 192.168.2.1), but what is the effect of having these two 0.0.0.0 routes? Is it switch implosion? Will a server just respond back over the route it receives the request from? I've read elsewhere that having two default gateways is an impossibility by definition, but I'm curious about this situation that our switch allowed. Thanks!

  Read the article

• NginX & Munin - Location and error 404

  - by user1684189

  I've a server that running nginx+php-fpm with this simple configuration: server { listen 80; server_name ipoftheserver; access_log /var/www/default/logs/access.log; error_log /var/www/default/logs/error.log; location / { root /var/www/default/public_html; index index.html index.htm index.php; } location ^~ /munin/ { root /var/cache/munin/www/; index index.html index.htm index.php; } location ~\.php$ { include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/default/public_html$fastcgi_script_name; } } but when I open ipoftheserver/munin/ I recieve a 404 error (when I request ipoftheserver/ the files on /var/www/default/public_html are listened correctly) Munin is installed and works perfectly. If I remove this configuration and I use this another one all works good (but not in the /munin/ directory): server { server_name ipoftheserver; root /var/cache/munin/www/; location / { index index.html; access_log off; } } How to fix? Many thanks for your help

  Read the article

• A web app provider has asked for specific browser config

  - by Matthew

  They have asks to turn off caching on our browsers. I was aghast that they would ask such a thing. I said to them; To avoid caching it is best practice to use; <meta http-equiv="pragma" content="no-cache" /> <meta http-equiv="cache-control" content="no-cache" /> This should work across all browsers. Their reply was; We need to refresh javascript at runtime, this will not help us – any more ideas? I replied; Unsure what you mean by “refresh javascript at runtime”. If you are using ajax, browser caching can effect the XMLHttpRequest open method. Adding these meta tags to the source has fixed this for me in the past. Browser caching only caches resources, it should have no effect on site scripting. These meta tags will bypass browser caching. This is a reasonable request, isn't it?

  Read the article

• Application Pool Identity corruption

  - by Gavin Osborn

  I have observed a few times while deploying software into IIS that every now and again the related Application Pools fail to restart and in the Event Log we see an error like the following: The identity of application pool, 'AppPoolName' is invalid. If it remains invalid when the first request for the application pool is processed, the application pool will be disabled. This does not happen frequently but when it does the only solution is to re-apply the Identity password in the IIS Manager Window. As soon as I re-apply and then restart the application pool the web sites come back up. Facts: The account is a service account whose password never expires. The account is local to the IIS host. The account password is never changed. This is IIS 6 running on Windows Server 2003 Deployment of the software is via MSI and involves several IIS Resets. The software is created in house and does not do anything fancy to IIS. Any ideas how the identity information might become corrupt? Edit: Clarification To be clear - this user account and password combination work absolutely fine and usually works fine as the Identity of the Application Pool. It is only when we deploy updates of our software into an existing IIS application that it stops working. Our password has not changed Our deployment does not change the password or reconfigure the application pools. This does not happen every time, 1/20 times perhaps. If we re-enter the password into IIS and restart the App Pools everything works.

  Read the article

• Xen virtual host can reach some sites but not others

  - by Tun H S Lee

  Okay, this is killing me. Debian Squeeze, Xen 4.0, brand new install. No iptables rules whatsoever except for the ones added by the default xen bridge script. Dom0 can reach the entire world, no problems. DomU can receive packets from some hosts, but not from others. For instance, if I ping Host A, it works fine. If I ping Host B, the DomU reports 100% packet loss. The hosts are random, but consistent (even after reboots). I can see no pattern to why some work and others don't. In fact, in some cases, different virtual hosts on the same server (an other server at a different data center) are divided; some work and others do not. I can reboot (DomU or Dom0 too) and the same hosts will work or fail as before. If I tcpdump on the Host B while pinging from the DomU, everything looks fine. It sees the echo request coming in and says it's sending one back. However, if I tcpdump peth0 on the Dom0, it never sees the echo reply. Any ideas what could be happening? I'm tearing my hair out here.

  Read the article

• Measure Upload Speed between a client and our server

  - by tresstylez

  We host a SAAS application specially customized for multiple clients. For one customer in particular -- they are reporting sporadic performance issues from various locations on their network, in particular UPLOADING documents through a form on our website. The client claims they have "bandwidth to spare" and that utilization of their "pipe" is so low that it MUST be our application, but our application has MANY clients and all features are working fine for all other clients. Interestingly enough -- DOWNLOADS (ie. just accessing the website, or downloading documents) is working fine. Speed test shows that they should get 1.2Mbps UP. So, a 3MB file should take 20 secs to upload. It takes 60+ seconds on their network. Sometimes even small files take OVER 10 minutes to upload or they timeout. Pings and Traceroutes don't show any abnormally long hops or response times. They claim other SAAS applications they use allow them to upload just fine. Both IT teams are working together to resolve this issue. What kind of data can I request from the clients to begin ruling things out. Seems like we need to somehow measure LATENCY of the networks involved or even at the switch level, we need to understand if packets are getting dropped somewhere and why. Where should I start? Any help is appreciated. I'll provide more info upon requests

  Read the article

• I just got a virus 6 mins ago, how? Situation.

  - by acidzombie24

  -Edit- for the people who say it isn't a virus. Norton does detect it as a virus, an icon was placed on my system tray and rkpg.exe is in my C: which was placed 6 min ago around the time my computer rebooted on its own causing me to lose data :@. Situation I on Windows XP, behind a Linksys router, I don't have DMZ on so nothing should be connecting to me. I had Firefox, MSN and Visual Studio opened. With C# I programmed a quick application to scan some pages with Internet Explorer. The site it was scanning was deviantART (which is pretty trustworthy), I doubt any banners there would hold a virus. I went to a suspicious site called freetxt.com but that was on Firefox and it didn't load the site. With an extra check I ping it and got this message "Ping request could not find host freetxt.com." The virus seems to be called braviax. Right now it brought up a message saying my computer may be infected? How on earth did it get in? I don't have uTorrent installed or any torrent or p2p applications. Nothing is installed on my computer that I haven't installed before and I know the exact time it installed because I see rkpg.exe on my C drive and my computer restarted on its own around the same time. For the previous 30 minutes actually the previous hour all I did was talk on MSN, not click any links (I went to freetxt on my own) and had that Internet Explorer thing running (which I programmed). How did it get in? I really doubt it came from a banner on deviantART and installed when I loaded the page with the webbrowser-control so something else may have happened? Is there any system defaults I should turn off? I have remote assistance off but even if it was on I shouldn't be infected due to the router not forwarding any ports?

  Read the article

• Nginx + PHPBB3 reverse proxy images problem

  - by siberiano

  Hello all I have a problem with my Nginx Frontend + Apache2 backend + PHPBB3 software. It doesn't load the CSS and the images neither. I get constant errors like these: 2010/04/14 16:57:25 [error] 13365#0: *69 open() "/var/www/foo/styles/styles/coffee_time/theme/large.css" failed (2: No such file or directory), client: 83.44.175.237, server: www.foo.com, request: "GET /styles/coffee_time/theme/large.css HTTP/1.1", host: "www.foo.com", referrer: "http://www.foo.com/viewforum.php?f=43" This is my config of the site: server { listen 80; server_name www.foo.com; access_log /var/log/nginx/foo.access.log; # serve static files directly location ~* ^.+.(jpg|jpeg|gif|css|png|js|ico)$ { access_log off; expires 30d; root /var/www/trasteando/; } location / { root /var/www/foo/; index /var/www/foo/index.php; } # proxy the PHP scripts to predefined upstream .apache. # location ~ .php$ { proxy_pass http://apache; } location /styles/ { root /var/www/foo/styles/; }

  Read the article

• Adding Multiple Interfaces to EC2 Ubuntu 12.04

  - by nocode

  I have a m1.medium Ubuntu 12.04 instance with two ENI's. I have a VPC setup with a private and public subnet. Private: 10.50.1.0/24 Public: 10.50.101.0/24 I initiated the instance on the private subnet. I configured a NAT instance and route all servers in the private subnet internet access. The route tables on the private subnet point towards the NAT instance and the route table on the public subnet point to the internet gateway. I am trying to add a public interface on the machine so that I can put it behind a ELB. When I added the second ENI and configured a static IP in /etc/network/interfaces and restarted the network services, I can no longer access from the Public subnet to the Private Subnet. Works Private private Private public Does not work Public private From Public Private, I ran a TCPDUMp on the private machine and can see the request coming in. My guess is it's trying to route over the new Public interface instead of the Private. Here's my route: default 10.50.1.1 0.0.0.0 UG 100 0 0 eth0 10.50.1.0 * 255.255.255.0 U 0 0 0 eth0 10.50.101.0 * 255.255.255.0 U 0 0 0 eth1 My networking knowledge is limited and I believe I have to add some routes but unsure of what command/syntax needs to be.

  Read the article

• Partition is missing in /dev

  - by haimg

  I'm having a strange problem since I moved from Centos5 to Centos6. I have three disks, first two are used as a RAID1, and third one is a stand-alone backup disk that is not listed in /etc/fstab (it is mounded when needed and then unmounted). My problem: After a boot, /dev/sdc exists but /dev/sdc1 does not. Also, the links in /dev/disks are also absent for the first partition of sdc. Disk itself is fine, and if I hot-remove it and plug it back in, /dev/sdc1 appears ok and everything is working. My question: What subsystem manages auto-discovery of disks, partitions, etc. during the boot process (e.g. what creates /dev/disks/by-label)? How do I configure it to scan /dev/sdc too and create all relevant files and links in /dev ? Edit: Here's the relevant part of dmesg output (the only place sdc appears). It does list sdc1, but it's not in /dev! sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdc: sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: DMAR:[DMA Read] Request device [00:1e.0] fault addr 361bc000 DMAR:[fault reason 06] PTE Read access is not set sdb1 sdb2 sdb3 sdc1 sda1 sd 1:0:0:0: [sdb] Attached SCSI disk sd 3:0:0:0: [sdc] Attached SCSI disk sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk

  Read the article

• Apache2.2 not responding or logging anything on Win 7

  - by Adam

  I'm having some trouble with Apache2.2 on Windows 7. For over a year it's been running no problem, but all of a sudden requests have just stopped responding. They don't time out as such, the browser just keeps on waiting forever. Nothing is recorded in either the error log (set to debug level), the access log, or Windows' Event Log. The problem showed up when I added a new VHost and restarted, however a syntax check has shown there's no problem with the config (from the little I changed), and the service does actually start error free. I've also disabled VHosts and tried with just localhost. I've tried to telnet to the web server, and it connects, but nothing happens. The prompt just goes blank and I can't type anything, and effectively become stuck. I've ensured there's a rule within Windows Firewall for Apache, and I've even disabled the entire thing just to check it wasn't the cause. Still the same. If I stop Apache however, the request fails immediately. I've uninstalled and reinstalled Apache, in the hope it might magically fix something using the default config, but still no joy. I've tried using a different port but nothing different. Does anybody have any suggestions to fix this? Or to perhaps try and figure out either if it's Apache itself not responding or something sitting between the two that's holding things up? I'm not too savvy on debugging Windows issues like this and I've been searching for hours but not found anything of use to me. Cheers Adam

  Read the article

• Running .NET code in XML file [closed]

  - by Stuart McIntosh

  We have 2 servers, 1 already configured with .net which works fine and a new one which appears to be configured the same but when I open an xml page in Internet Explorer it complains about the <% tag. We have IIS on win srvr 2003 SP2. The website is configured with .NET 1.1.4322. In ISAPI extensions have set the .XML extension to use c:\windows\microsoft.net\framework\v1.1.4322\aspnet_isapi.dll But the page: <property name="documentmaxage" value="0"/> <property name="documentmaxstale" value="0"/> <var name="m_Prompt_Path" /> <form id="InitVoiceXmlDoc"> <block> <assign name="m_Prompt_Path" expr="&quot;<% Response.Write(Request.QueryString["m_Prompt_Path"]); %>&quot;"/> </block> </form> gives the error: The XML page cannot be displayed Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later. The character '<' cannot be used in an attribute value. Error processing resource 'http://localhost:11119/fails.xml'. Lin... &quo... We have the same config on another server which works fine. So are there other options apart from the ISAPI extensions that I need to look at

  Read the article

• Basic IPTables setup for OpenVPN/HTTP/HTTPS server

  - by Afronautica

  I'm trying to get a basic IPTables setup on my server which will allow HTTP/SSH access, as well as enable the use of the server as an OpenVPN tunnel. The following is my current rule setup - the problem is OpenVPN queries (port 1194) seemed to be getting dropped as a result of this ruleset. Pinging a website while logged into the VPN results in teh response: Request timeout for icmp_seq 1 92 bytes from 10.8.0.1: Destination Port Unreachable When I clear the IPTable rules pinging from the VPN works fine. Any ideas? iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE iptables -A INPUT -p tcp --dport 1194 -j ACCEPT iptables -A FORWARD -p tcp --dport 1194 -j ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -i ! lo -d 127.0.0.0/8 -j REJECT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A OUTPUT -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT iptables -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT iptables -A INPUT -j REJECT iptables -A FORWARD -j REJECT

  Read the article

• Cache Control Headers with IIS 7.5

  - by Brad

  I'm trying to wrap my head around client side (web browser) caching and how it works in relation to IIS 7.5 cache control headers. In particular: If we want to force clients to reload cached resources, how must IIS be configured? Do we need to set expire web content immediately if the resources on the server have a more recent Modified Date (or ETag value)? Right now we're not setting any cache headers. So if I set a cache header of no-cache (which I think is the equivalent of expire web content immediately) will that force the web browser to obtain a new version of a particular file. Or will the browser only request a new version after it deems its current copy to be stale and then from that point forward not cache it? Would a best practice be to set a cache control flag of 1 week, then 8 days before I know I am going to make a change set the cache control down to for instance 30 minutes? But if I do that and then need to immediately expire an item from users caches because there was an issue with it how do I do that?

  Read the article

• What is the best hosting option for Flash web-widget?

  - by par

  Our Flash web-widget has got highly popular. It is downloaded around 100,000 times per day. And that is the problem. Our server bandwidth is too narrow to deliver the widget to the clients fast. The widget is loaded very slow. Probably 20 times slower than before (at peak times). Probably I have choosen not the right hoster for my task - delivering 1 MB Flash widget to 100,000 users per day. What is the best hosting solution in my case? I'm not good at server administration so forgive me if I sound naive. The details are the following. Our hoster options: -Dedicated server, Ubuntu -10 Mbit Connection -monthly bandwidth limit: 2000 GB Widget size is 1 MB. The widget consists of the main SWF and a number of loaded SWF and data files. This is a part of Apache Status report taken right now ---- Server uptime: 1 hour 2 minutes 38 seconds Total accesses: 74865 - Total Traffic: 5.8 GB CPU Usage: u28 s7.78 cu0 cs0 - .952% CPU load 19.9 requests/sec - 1.6 MB/second - 81.1 kB/request 200 requests currently being processed, 0 idle workers WWWWWWWWWWWWWWWWWWWWWWWWCWWWWWWWWWWWWWWWWWWWWWWWWWWCWWWWWWWCWWWW WWWWWCWWWWWWWWWWWWWWCWWWWWWWWWWWWCWWWWWWWWCWWCWWWWWWWWWWWWWWWWWW WWWWWWWWWWWWWWWWCWWWWWWWWWWWWWWWWWWWWWWWWWWWCWCWWWWWWWWWWWWWWWCW WWWWWWWW........................................................ ----

  Read the article

• How do I troubleshoot nginx not recognizing passenger?

  - by Jade

  Issue: nginx does not seem to recognize my rails application Symptoms: When the server starts up, it shows the "Welcome to nginx!" message instead of my Rails application. Nginx seems to be using the local nginx path instead of the Rails root I specified: 2010/04/18 06:29:06 [error] 783#0: *1 "/usr/local/nginx/html/blog/index.html" is not found (2: No such file or directory), client: 1.2.3.4, server: www.farmerjade.com, request: "GET /blog/ HTTP/1.1", host: "www.farmerjade.com" I used [RVM and Passenger Setup on NGINX][1] to install nginx and passenger on a virtual machine. Here is my nginx configuration: user farmerjade; worker_processes 1; ... http { include mime.types; default_type application/octet-stream; passenger_ruby /home/farmerjade/.rvm/bin/passenger_ruby; passenger_root /home/farmerjade/.rvm/gems/ree-1.8.7-head/gems/passenger-2.2.11; ... server { listen 80; server_name www.farmerjade.com; root /home/farmerjade/farmerjade/public; passenger_enabled on; rails_env development; ... I'd appreciate any help anyone has to offer -- I'm quite new to nginx.

  Read the article

• Active Directory: Determining DN or OU from log in credentials [closed]

  - by Christopher Broome

  I'm updating a PHP login process to leverage active directory on a Windows server. The logging in process seems pretty straight forward via a "ldap_bind", but I also want to pull some profile information from the AD server (first name, last name, etc...) which seems to require a robust distinguished name (DN). When on the windows server I can grab this via 'dsquery user' on the command prompt, but is there a way to get the same value from just the user's login credentials in PHP? I want to avoid getting a list of hundreds of DNs when on-boarding clients and associating each with one of our users, so any means to programmatically determine this would be preferential. Otherwise, I'll know the domain and host for the request so I can at least set the DC portions of the DN, but the organizational units (OU) seem to be pretty important for querying data. If I can find some of the root level OU values associated with the user I can do a ldap_search and crawl. I browsed through the existing questions and found some similar but nothing that really addressed this, so my apologies if the obvious answer is out there. Thanks for the help.

  Read the article

• 404 with serving static files in a custom nginx configuration

  - by code90

  In my nginx configuration, I have the following: location /admin/ { alias /usr/share/php/wtlib_4/apps/admin/; location ~* .*\.php$ { try_files $uri $uri/ @php_admin; } location ~* \.(js|css|png|jpg|jpeg|gif|ico|pdf|zip|rar|air)$ { expires 7d; access_log off; } } location ~ ^/admin/modules/([^/]+)(.*\.(html|js|json|css|png|jpg|jpeg|gif|ico|pdf|zip|rar|air))$ { alias /usr/share/php/wtlib_4/modules/$1/admin/$2; } location ~ ^/admin/modules/([^/]+)(.*)$ { try_files $uri @php_admin_modules; } location @php_admin { if ($fastcgi_script_name ~ /admin(/.*\.php)$) { set $valid_fastcgi_script_name $1; } fastcgi_pass $byr_pass; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/php/wtlib_4/apps/admin$valid_fastcgi_script_name; fastcgi_param REDIRECT_STATUS 200; include /etc/nginx/fastcgi_params; } location @php_admin_modules { if ($fastcgi_script_name ~ /admin/modules/([^/]+)(.*)$) { set $byr_module $1; set $byr_rest $2; } fastcgi_pass $byr_pass; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/php/wtlib_4/modules/$byr_module/admin$byr_rest; fastcgi_param REDIRECT_STATUS 200; include /etc/nginx/fastcgi_params; } Following is the requested url which ends up with "404": http://www.{domainname}.com/admin/modules/cms/styles/cms.css Following is the error log: [error] 19551#0: *28 open() "/usr/share/php/wtlib_4/apps/admin/modules/cms/styles/cms.css" failed (2: No such file or directory), client: xxx.xxx.xxx.xxx, server: {domainname}.com, request: "GET /admin/modules/cms/styles/cms.css HTTP/1.1", host: "www.{domainname}.com" Following urls works fine: http://www.{domainname}.com/admin/modules/store/?a=manage http://www.{domainname}.com/admin/modules/cms/?a=cms.load Can anyone see what the problem could be? Thanks. PS. I am trying to migrate existing sites from apache to nginx.

  Read the article

• Help configuring Mercury mail or similiar with XAMPP to send e-mail outside of localhost

  - by user291040

  I'm building a PHP/MySQL driven website for my department at work (installed via XAMPP). I need to be able to send mail to outside e-mail addresses (e.g., Yahoo, Hotmail, etc.) using the PHP mail() function. As I see it I have to solutions: Configure the SMTP directive in php.ini to the server running at my work. Configure/run a mail server that can send e-mails outside of localhost (I'm trying Mercury because it comes installed with XAMPP). Here are problems I've come up against: I took a guess at our SMTP server name, and when calling PHP mail(), I get the error SMTP server response: 530 5.7.1 Client was not authenticated I can't be sure, however, the SMTP name is correct (I can't get help from our IT guys because of politics). I have tried to use mercury mail. Mercury seems to be picking up the request, but it doesn't want to forward the e-mail to the outside. I keep getting a Temporary error 240 (temporary MX resolution error). I've searched high and low but still can't find a definitive answer on how to send e-mails outside of localhost. Any help is greatly appreciated.

  Read the article

• Optimizing Apache for large file serving

  - by D_Guy13

  I have a random problem with Apache that I can't quite figure out, here is my setup, Windows Server 2008 R2, 64 Bit, 5GB RAM, SSD with 200 MB(Read/write) and Dual Core CPU @ 2.1 GHz A dump from mod-staus, Server Version: Apache/2.4.7 (Win32) mod_limitipconn/0.24 mod_antiloris/0.5.2 PHP/5.5.9 Server MPM: WinNT Apache Lounge VC11 Server Built: Nov 21 2013 20:13:01 Current Time: Thursday, 21-Aug-2014 23:38:06 W. Europe Daylight Time Restart Time: Thursday, 21-Aug-2014 20:30:47 W. Europe Daylight Time Parent Server Config. Generation: 1 Parent Server MPM Generation: 1 Server uptime: 3 hours 7 minutes 18 seconds Server load: -1.00 -1.00 -1.00 Total accesses: 283025 - Total Traffic: 1172.2 GB 25.2 requests/sec - 106.8 MB/second - 4.2 MB/request 62 requests currently being processed, 388 idle workers Serving large .zip & iso files using mod_xsendfile. (File size range 500 MB - 1.5 GB) The setup works and is running fine. CPU usage is very unstable, jumps all the time between 10% - 90% and the servers goes down when it hits 100%. In that case I have to hard restart the server. Server it outputting traffic at 30 Mbps. Is there anything else I should think about to get a more stable CPU usage? Is that CPU usage normal? Can switching to Linux help me achieve better CPU usage?

  Read the article

• reverse proxying with NGINX to two back-end servers

  - by aag

  I am trying to learn how to configure the Nginx proxy. All requests from external (www.external.com) should go to internal server 10.10.10.16:2080, except for www.external.com/nagios requests, which should go to internal 10.10.10.18. My location block looks as follows: location ~* / { proxy_buffers 16 4k; proxy_buffer_size 2k; proxy_buffering off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Accept-Encoding ""; proxy_pass http://10.10.10.16:2080; } # # nagios server location ~* /nagios/ { proxy_buffers 16 4k; proxy_buffer_size 2k; proxy_buffering off; # proxy_set_header Host $host; # proxy_set_header X-Real-IP $remote_addr; # proxy_set_header Accept-Encoding ""; proxy_pass http://10.10.10.18; } The first location seems to work fine. However, any request to www.external.com/nagios sends the browser into the eternal pastures. Of course, 10.10.10.18/nagios was tested and works fine. What am I missing?

  Read the article

• Why domain.com appears as theplant.com when hosted on hostgator?

  - by silow

  I have a script that's supposed to detect the url of its caller website. If the caller is another website, it should give something like http://callersite.com. I'm using this line of php code (though I suspect this won't matter for sysadmins) gethostbyaddr($_SERVER['REMOTE_ADDR']) I'm testing with a caller site that's hosted on hostgator. What I'm noticing though is that I don't get callersite.com, I get something like 1a.12.12ab.static.theplanet.com. I don't know what theplanet.com is and why I'm not getting caller site.com. Also what do I need to do to really get the domain of the site making a call to my script? -- Thanks for the explanation. Some have advised I use $_SERVER['HTTP_REFERER'] but it's not what I'm after. My script acts as an API. Another website makes a curl request to it and gets an output and later on presents it to the user. So http referrer gives false since the caller site.com is making a direct call to me. So any hope?

  Read the article

• Why is my server performance degrading to the point of stopping, periodically?

  - by Pascal Aschwanden

  So, once in a while, I see in firebug that a request takes over 15 or even 60 seconds to respond and sometimes never. Here is what I've ruled out: It's not the CPU, cuz every time I check the Server load its less then 6 for all 3 numbers It's not the memory, because thats fairly low too, less the 50% It's not the I/O anymore, because I've seen the graphs that Joyent sent back to me when I requested them, and they show less then 3MB of I/O (mostly all read). It's not the SQL performance - I've profiled every last SQL command that runs, and they're all (99.9% of them anyway) running in less then 30ms, most run in less then 5ms. Oh and I've been profiling all the script execution times, and even the when the problem occurs, the script always manages to finish in 50ms or less (that's 1 / 20th of a second ). Now, I do run alot of ajax calls. 1 every 2 seconds per user and I have 300 DAU+. But, even if all 300 are playing simultaneously, thats still only 150 calls per second max. The only other thing I can think of is that one of my neighbors is funky. The problem is highly intermittent. 99% of the time it works perfectly and there's excellent performance. but 99%+ is not good enough. Eventually the performance gets so bad I have to restart the server, at which point everything is fine again. I've done this about 4 times now. Any ideas? Note: this is on joyent, vps, intro package 256mb of ram with bursting. here are the mysql dump info: Traffic ø per hour Received 18 MiB 29 MiB Sent 134 MiB 221 MiB Total 151 MiB 251 MiB Connections ø per hour % max. concurrent connections 5 --- --- Failed attempts 0 0.00 0.00% Aborted 0 0.00 0.00% Total 9,418 15.59 k 100.00%

  Read the article

• Serving static content with Apache web server and Tomcat

  - by Hunter

  I've configured Apache web server and Tomcat like this: I created a new file in apache2/sites-available, named it "myDomain" with this content: <VirtualHost *:80> ServerAdmin [email protected] ServerName myDomain.com ServerAlias www.myDomain.com ProxyPass / ajp://localhost:8009 <Proxy *> AllowOverride AuthConfig Order allow,deny Allow from all Options -Indexes </Proxy> </VirtualHost> Enabled mod_proxy and myDomain a2enmod proxy_ajp a2ensite myDomain Edited Tomcat's server.xml (inside the Engine tag) <Host name="myDomain.com" appBase="webapps/myApp"> <Context path="" docBase="."/> </Host> <Host name="www.myDomain.com" appBase="webapps/myApp"> <Context path="" docBase="."/> </Host> This works great. But I don't like to put static files (html, images, videos etc.) into {tomcat home}/webapps/myApp's subfolders instead I'd like to put them the apache webserver's root WWW directory's subdirectories. And I'd like Apache web server to serve these files alone. How could I do this? So all incoming request will be forwarded to Tomcat except those that ask for a static file.

  Read the article

• Apache using 100% CPU, once again

  - by CBenni

  Recently, apache2 started using 100% of CPU power: top gives me From other, similar threads, I took the tip to use mod_status. Aside from HUGE amounts of NULL requests, it gives: CPU Usage: u2.16 s1.32 cu0 cs0 - .0835% CPU load 1.2 requests/sec - 17.6 kB/second - 14.6 kB/request 8 requests currently being processed, 42 idle workers The access and error logs do not show anything surprising or intriguing at all. Note the .8% CPU usage. Another tip was to use strace: root@server:~# strace -p 1956 Process 1956 attached - interrupt to quit restart_syscall(<... resuming interrupted call ...> And remains like this for at least half an hour, without producing any additional output. Restarting apache fixed the problem for less than a second The server runs a few custom python scripts aswell as a django-powered website on apache2 (up-to-date), but even turning the scripts off (or not having them active in the first place) did not change anything. After I stopped apache and powered my server off, powered it on a few minutes afterwards and restarted all my services, the CPU usage remained low for several hours, just in order to pop up again randomly (?) The DigitalOcean CPU stats on my server are: You can see how the CPU usage was super high for almost half a day until I restarted the bot - just to remain stable for several hours and then pop up again. I am completely at a loss of words and don't know what I could do to find out what piece of my code is giving me these problems or if apache itself is the cause... Therefore I would greatly appreciate any hints to the questions: What else can I try to do? Which things might I not have checked? Is this definitely in my own code? How do you find what part of python code crashes an app via a infinite loop or similar?

  Read the article

< Previous Page | 474 475 476 477 478 479 480 481 482 483 484 485  | Next Page >