Search Results

Search found 89673 results on 3587 pages for 'code conversion'.

Page 479/3587 | < Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >

• BizTalk 2009 - Custom Functoid Categories

  - by StuartBrierley

  I recently had cause to code a number of custom functoids to aid with some maps that I was writing. Once these were developed and deployed to C:\Program Files\Microsoft BizTalk Server 2009\Developer Tools\Mapper Extensions a quick refresh allowed them to appear in toolbox.  After dropping these on a map and configuring the appropriate inputs I tested the map to check that they worked as expected.  All but one of the functoids worked as expecetd, but the final functoid appeared not to be firing at all. I had already tested the code used in a simple test harness application, so I was confident in the code used, but I still needed to figure out what the problem might be. Debugging the map helped me on the way; for some reason the functoid in question was not shown correctly - the functoid definition was wrong. After some investigations I found that the functoid type you assign when coding a custom functoid affects more than just the category it appears in; different functoid types have different capabilities, including what they can link too.  For example, a logical functoid can not provide content for an output element, it can only say whether the element exists.  Map this via a Value Mapping functoid and the value of true or false can be seen in the output element. The functoid I was having problems with was one whare I had used the XPath functoid type, this had seemed to be a good fit as I was looking up content in a config file using xpath and I wanted it to appear the advanced area.  From the table below you can see that this functoid type is marked as "Internal Only", preventing it from being used for custom functoids.  Changing my type to String allowed the functoid to function as expected. Category Description Toolbox Group Assert Internal Use Only Advanced Conversion Converts characters to and from numerics and converts numbers from one base to another. Conversion Count Internal Use Only Advanced Cumulative Performs accumulations of the value of a field that occurs multiple times in a source document and outputs a single output. Cumulative DatabaseExtract Internal Use Only Database DatabaseLookup Internal Use Only Database DateTime Adds date, time, date and time, or add days to a specified date, in output data. Date/Time ExistenceLooping Internal Use Only Advanced Index Internal Use Only Advanced Iteration Internal Use Only Advanced Keymatch Internal Use Only Advanced Logical Controls conditional behavior of other functoids to determine whether particular output data is created. Logical Looping Internal Use Only Advanced MassCopy Internal Use Only Advanced Math Performs specific numeric calculations such as addition, multiplication, and division. Mathematical NilValue Internal Use Only Advanced Scientific Performs specific scientific calculations such as logarithmic, exponential, and trigonometric functions. Scientific Scripter Internal Use Only Advanced String Manipulates data strings by using well-known string functions such as concatenation, length, find, and trim. String TableExtractor Internal Use Only Advanced TableLooping Internal Use Only Advanced Unknown Internal Use Only Advanced ValueMapping Internal Use Only Advanced XPath Internal Use Only Advanced Links http://msdn.microsoft.com/en-us/library/microsoft.biztalk.basefunctoids.functoidcategory(BTS.20).aspx http://blog.eliasen.dk/CommentView,guid,d33b686b-b059-4381-a0e7-1c56e808f7f0.aspx

  Read the article

• Multiple render targets and gamma correctness in Direct3D9

  - by Mario

  Let's say in a deferred renderer when building your G-Buffer you're going to render texture color, normals, depth and whatever else to your multiple render targets at once. Now if you want to have a gamma-correct rendering pipeline and you use regular sRGB textures as well as rendertargets, you'll need to apply some conversions along the way, because your filtering, sampling and calculations should happen in linear space, not sRGB space. Of course, you could store linear color in your textures and rendertargets, but this might very well introduce bad precision and banding issues. Reading from sRGB textures is easy: just set SRGBTexture = true; in your texture sampler in your HLSL effect code and the hardware does the conversion sRGB-linear for you. Writing to an sRGB rendertarget is theoretically easy, too: just set SRGBWriteEnable = true; in your effect pass in HLSL and your linear colors will be converted to sRGB space automatically. But how does this work with multiple rendertargets? I only want to do these corrections to the color textures and rendertarget, not to the normals, depth, specularity or whatever else I'll be rendering to my G-Buffer. Ok, so I just don't apply SRGBTexture = true; to my non-color textures, but when using SRGBWriteEnable = true; I'll do a gamma correction to all the values I write out to my rendertargets, no matter what I actually store there. I found some info on gamma over at Microsoft: http://msdn.microsoft.com/en-us/library/windows/desktop/bb173460%28v=vs.85%29.aspx For hardware that supports Multiple Render Targets (Direct3D 9) or Multiple-element Textures (Direct3D 9), only the first render target or element is written. If I understand correctly, SRGBWriteEnable should only be applied to the first rendertarget, but according to my tests it doesn't and is used for all rendertargets instead. Now the only alternative seems to be to handle these corrections manually in my shader and only correct the actual color output, but I'm not totally sure, that this'll not have any negative impact on color correctness. E.g. if the GPU does any blending or filtering or multisampling after the Linear-sRGB conversion... Do I even need gamma correction in this case, if I'm just writing texture color without lighting to my rendertarget? As far as I know, I DO need it because of the texture filtering and mip sampling happening in sRGB space instead, if I don't correct for it. Anyway, it'd be interesting to hear other people's solutions or thoughts about this.

  Read the article

• What is the purpose of Managers / Transactions?

  - by maxdj

  I'm building a spring application for the first time. I'm running into lots of problems with concurrency, and I suspect that there is something wrong with the way I'm managing the backend. The only difference I can see between my backend code and examples I've seen are manager classes. In my code, I have my model (managed by hibernate) and my DAOs on top of that to do CRUD/searching/etc on the models. In example code I have looked at, they never use the DAO directly. Instead, they use manager classes that call the DAOs indirectly. To me, this just seems like pointless code duplication. What are these manager classes for? I've read that they wrap my code in "transactions," but why would I want that?

  Read the article

• Syntax highlighting in MS Word document

  - by ArunSaha

  I want to insert some C/C++ source code into a Microsoft Word document. I have no problem in copying the code from source file and pasting into Word. I can do fixed-width. But, in Word, I see the code in black-and-white format; I loose the syntax highlighting as I get in the source code editor (for me, gvim). So, my question is, is there any way to do syntax highlighting of C/C++ source code in MS Word?

  Read the article

• Cython Speed Boost vs. Usability

  - by zubin71

  I just came across Cython, while I was looking out for ways to optimize Python code. I read various posts on stackoverflow, the python wiki and read the article "General Rules for Optimization". Cython is something which grasps my interest the most; instead of writing C-code for yourself, you can choose to have other datatypes in your python code itself. Here is a silly test i tried, #!/usr/bin/python # test.pyx def test(value): for i in xrange(value): i**2 if(i==1000000): print i test(10000001) $ time python test.pyx real 0m16.774s user 0m16.745s sys 0m0.024s $ time cython test.pyx real 0m0.513s user 0m0.196s sys 0m0.052s Now, honestly, i`m dumbfounded. The code which I have used here is pure python code, and all I have changed is the interpreter. In this case, if cython is this good, then why do people still use the traditional Python interpretor? Are there any reliability issues for Cython?

  Read the article

• C#/.NET Little Wonders &ndash; Cross Calling Constructors

  - by James Michael Hare

  Just a small post today, it’s the final iteration before our release and things are crazy here!  This is another little tidbit that I love using, and it should be fairly common knowledge, yet I’ve noticed many times that less experienced developers tend to have redundant constructor code when they overload their constructors. The Problem – repetitive code is less maintainable Let’s say you were designing a messaging system, and so you want to create a class to represent the properties for a Receiver, so perhaps you design a ReceiverProperties class to represent this collection of properties. Perhaps, you decide to make ReceiverProperties immutable, and so you have several constructors that you can use for alternative construction: 1: // Constructs a set of receiver properties. 2: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable, bool isBuffered) 3: { 4: ReceiverType = receiverType; 5: Source = source; 6: IsDurable = isDurable; 7: IsBuffered = isBuffered; 8: } 9: 10: // Constructs a set of receiver properties with buffering on by default. 11: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable) 12: { 13: ReceiverType = receiverType; 14: Source = source; 15: IsDurable = isDurable; 16: IsBuffered = true; 17: } 18:  19: // Constructs a set of receiver properties with buffering on and durability off. 20: public ReceiverProperties(ReceiverType receiverType, string source) 21: { 22: ReceiverType = receiverType; 23: Source = source; 24: IsDurable = false; 25: IsBuffered = true; 26: } Note: keep in mind this is just a simple example for illustration, and in same cases default parameters can also help clean this up, but they have issues of their own. While strictly speaking, there is nothing wrong with this code, logically, it suffers from maintainability flaws.  Consider what happens if you add a new property to the class?  You have to remember to guarantee that it is set appropriately in every constructor call. This can cause subtle bugs and becomes even uglier when the constructors do more complex logic, error handling, or there are numerous potential overloads (especially if you can’t easily see them all on one screen’s height). The Solution – cross-calling constructors I’d wager nearly everyone knows how to call your base class’s constructor, but you can also cross-call to one of the constructors in the same class by using the this keyword in the same way you use base to call a base constructor. 1: // Constructs a set of receiver properties. 2: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable, bool isBuffered) 3: { 4: ReceiverType = receiverType; 5: Source = source; 6: IsDurable = isDurable; 7: IsBuffered = isBuffered; 8: } 9: 10: // Constructs a set of receiver properties with buffering on by default. 11: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable) 12: : this(receiverType, source, isDurable, true) 13: { 14: } 15:  16: // Constructs a set of receiver properties with buffering on and durability off. 17: public ReceiverProperties(ReceiverType receiverType, string source) 18: : this(receiverType, source, false, true) 19: { 20: } Notice, there is much less code.  In addition, the code you have has no repetitive logic.  You can define the main constructor that takes all arguments, and the remaining constructors with defaults simply cross-call the main constructor, passing in the defaults. Yes, in some cases default parameters can ease some of this for you, but default parameters only work for compile-time constants (null, string and number literals).  For example, if you were creating a TradingDataAdapter that relied on an implementation of ITradingDao which is the data access object to retreive records from the database, you might want two constructors: one that takes an ITradingDao reference, and a default constructor which constructs a specific ITradingDao for ease of use: 1: public TradingDataAdapter(ITradingDao dao) 2: { 3: _tradingDao = dao; 4:  5: // other constructor logic 6: } 7:  8: public TradingDataAdapter() 9: { 10: _tradingDao = new SqlTradingDao(); 11:  12: // same constructor logic as above 13: }   As you can see, this isn’t something we can solve with a default parameter, but we could with cross-calling constructors: 1: public TradingDataAdapter(ITradingDao dao) 2: { 3: _tradingDao = dao; 4:  5: // other constructor logic 6: } 7:  8: public TradingDataAdapter() 9: : this(new SqlTradingDao()) 10: { 11: }   So in cases like this where you have constructors with non compiler-time constant defaults, default parameters can’t help you and cross-calling constructors is one of your best options. Summary When you have just one constructor doing the job of initializing the class, you can consolidate all your logic and error-handling in one place, thus ensuring that your behavior will be consistent across the constructor calls. This makes the code more maintainable and even easier to read.  There will be some cases where cross-calling constructors may be sub-optimal or not possible (if, for example, the overloaded constructors take completely different types and are not just “defaulting” behaviors). You can also use default parameters, of course, but default parameter behavior in a class hierarchy can be problematic (default values are not inherited and in fact can differ) so sometimes multiple constructors are actually preferable. Regardless of why you may need to have multiple constructors, consider cross-calling where you can to reduce redundant logic and clean up the code.   Technorati Tags: C#,.NET,Little Wonders

  Read the article

• Initialize Pointer Through Function

  - by SoulBeaver

  I was browsing my teacher's code when I stumbled across this: Order* order1 = NULL; then order1 = order(customer1, product2); which calls Order* order(Customer* customer, Product* product) { return new Order(customer, product); } This looks like silly code. I'm not sure why, but the teacher initialized all pointers to NULL instead of declaring them right away(looking at the code it's entirely possible, but he chose not to). My question is: is this good or acceptable code? Does the function call have any benefits over calling a constructor explicitely? And how does new work in this case? Can I imagine the code now as kind of like: order1 = new Order(customer, product);

  Read the article

• Day 3 - XNA: Hacking around with images

  - by dapostolov

  Yay! Today I'm going to get into some code! My mind has been on this all day! I find it amusing how I practice, daily, to be "in the moment" or "present" and the excitement and anticipation of this project seems to snatch it away from me frequently. WELL!!! (Shakes Excitedly) Let's do this =)! Let's code! For these next few days it is my intention to better understand image rendering using XNA; after said prototypes are complete I should (fingers crossed) be able to dive into my game code using the design document I hammered out the other night. On a personal note, I think the toughest thing right now is finding the time to do this project. Each night, after my little ones go to bed I can only really afford a couple hours of work on this project. However, I hope to utilise this time as best as I can because this is the first time in a while I've found a project that I've been passionate about. A friend recently asked me if I intend to go 3D or extend the game design. Yes. For now I'm keeping it simple. Lastly, just as a note, as I was doing some further research into image rendering this morning I came across some other XNA content and lessons learned. I believe this content could have probably been posted in the first couple of posts, however, I will share the new content as I learn it at the end of each day. Maybe I'll take some time later to fix the posts but for now Installation and Deployment - Lessons Learned I had installed the XNA studio  (Day 1) and the site instructions were pretty easy to follow. However, I had a small difficulty with my development environment. You see, I run a virtual desktop development environment. Even though I was able to code and compile all the tutorials the game failed to run...because I lacked a 3D capable card; it was not detected on the virtual box... First Lesson: The XNA runtime needs to "see" the 3D card! No sweat, Il copied the files over to my parent box and executed the program. ERROR. Hmm... Second Lesson (which I should have probably known but I let the excitement get the better of me): you need the XNA runtime on the client PC to run the game, oh, and don't forget the .Net Runtime! Sprite, it ain't just a Soft Drink... With these prototypes I intend to understand and perform the following tasks. learn game development terminology how to place and position (rotate) a static image on the screen how to layer static images on the screen understand image scaling can we reuse images? understand how framerate is handled in XNA how to display text , basic shapes, and colors on the screen how to interact with an image (collision of user input?) how to animate an image and understand basic animation techniques how to detect colliding images or screen edges how to manipulate the image, lets say colors, stretching how to focus on a segment of an image...like only displaying a frame on a film reel what's the best way to manage images (compression, storage, location, prevent artwork theft, etc.) Well, let's start with this "prototype" task list for now...Today, let's get an image on the screen and maybe I can mark a few of the tasks as completed... C# Prototype1 New Visual Studio Project Select the XNA Game Studio 3.1 Project Type Select the Windows Game 3.1 Template Type Prototype1 in the Name textbox provided Press OK. At this point code has auto-magically been created. Feel free to press the F5 key to run your first XNA program. You should have a blue screen infront of you. Without getting into the nitty gritty right, the code that was generated basically creates some basic code to clear the window content with the lovely CornFlowerBlue color. Something to notice, when you move your mouse into the window...nothing. ooooo spoooky. Let's put an image on that screen! Step A - Get an Image into the solution Under "Content" in your Solution Explorer, right click and add a new folder and name it "Sprites". Copy a small image in there; I copied a "Royalty Free" wizard hat from a quick google search and named it wizards_hat.jpg (rightfully so!) Step B - Add the sprite and position fields Now, open/edit  Game1.cs Locate the following line:  SpriteBatch spriteBatch; Under this line type the following:         SpriteBatch spriteBatch; // the line you are looking for...         Texture2D sprite;         Vector2 position; Step C - Load the image asset Locate the "Load Content" Method and duplicate the following:             protected override void LoadContent()         {             spriteBatch = new SpriteBatch(GraphicsDevice);             // your image name goes here...             sprite = Content.Load<Texture2D>("Sprites\\wizards_hat");             position = new Vector2(200, 100);             base.LoadContent();         } Step D - Draw the image Locate the "Draw" Method and duplicate the following:        protected override void Draw(GameTime gameTime)         {             GraphicsDevice.Clear(Color.CornflowerBlue);             spriteBatch.Begin(SpriteBlendMode.AlphaBlend);             spriteBatch.Draw(sprite, position, Color.White);             spriteBatch.End();             base.Draw(gameTime);         }  Step E - Compile and Run Engage! (F5) - Debug! Your image should now display on a cornflowerblue window about 200 pixels from the left and 100 pixels from the top. Awesome! =) Pretty cool how we only coded a few lines to display an image, but believe me, there is plenty going on behind the scenes. However, for now, I'm going to call it a night here. Blogging all this progress certainly takes time... However, tomorrow night I'm going to detail what we just did, plus start checking off points on that list! I'm wondering right now if I should add pictures / code to this post...let me know if you want them =) Best Regards, D.

  Read the article

• Eclipse 3.5.1 update error (HTTP 503)

  - by PiedPiper

  I'm trying to update Eclipse 5.3.1 (on Gentoo Linux) from the Galileo Discovery Site and I get this error message: Network connection problems encountered during search. Unable to access "http://download.eclipse.org/releases/galileo". Error accessing site stream. [Server returned HTTP response code: 503 for URL: http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd] Server returned HTTP response code: 503 for URL: http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd Error accessing site stream. [Server returned HTTP response code: 503 for URL: http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd] Server returned HTTP response code: 503 for URL: http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd It seems the 503 error code is intended to stop software from constantly downloading this file from w3.org. But how do I persuade Eclipse to stop requesting it?

  Read the article

• When do you learn from your mistakes?

  - by smayers81

  When are you supposed to learn from your mistakes in coding / design? Is it something you take with you to the next project or do you learn in the middle of your current one, sacrificing consistency for cleaner, more well-informed code? For example, my application can be distinctly demarcated down two lines of business -- say one side is for sales and the other is for marketing. Both are somewhat tied together, but as far as the team structure, use cases, developers, etc. the app consists of the Sales code and the Marketing Code. Now, say the Sales code went in first and while good-intentioned, made some bad mistakes. Should the Marketing Code follow suit and make the same mistakes for the sake of consistency or should Marketing architects and designers instead learn from the mistakes that Sales made and developer a cleaner codebase, even though Sales and Marketing are in the exact same system? Basically, do you learn from your mistakes while in a project or do you continue to pile crap on top of crap?

  Read the article

• Use a Fake Http Channel to Unit Test with HttpClient

  - by Steve Michelotti

  Applications get data from lots of different sources. The most common is to get data from a database or a web service. Typically, we encapsulate calls to a database in a Repository object and we create some sort of IRepository interface as an abstraction to decouple between layers and enable easier unit testing by leveraging faking and mocking. This works great for database interaction. However, when consuming a RESTful web service, this is is not always the best approach. The WCF Web APIs that are available on CodePlex (current drop is Preview 3) provide a variety of features to make building HTTP REST services more robust. When you download the latest bits, you’ll also find a new HttpClient which has been updated for .NET 4.0 as compared to the one that shipped for 3.5 in the original REST Starter Kit. The HttpClient currently provides the best API for consuming REST services on the .NET platform and the WCF Web APIs provide a number of extension methods which extend HttpClient and make it even easier to use. Let’s say you have a client application that is consuming an HTTP service – this could be Silverlight, WPF, or any UI technology but for my example I’ll use an MVC application: 1: using System; 2: using System.Net.Http; 3: using System.Web.Mvc; 4: using FakeChannelExample.Models; 5: using Microsoft.Runtime.Serialization; 6:   7: namespace FakeChannelExample.Controllers 8: { 9: public class HomeController : Controller 10: { 11: private readonly HttpClient httpClient; 12:   13: public HomeController(HttpClient httpClient) 14: { 15: this.httpClient = httpClient; 16: } 17:   18: public ActionResult Index() 19: { 20: var response = httpClient.Get("Person(1)"); 21: var person = response.Content.ReadAsDataContract<Person>(); 22:   23: this.ViewBag.Message = person.FirstName + " " + person.LastName; 24: 25: return View(); 26: } 27: } 28: } On line #20 of the code above you can see I’m performing an HTTP GET request to a Person resource exposed by an HTTP service. On line #21, I use the ReadAsDataContract() extension method provided by the WCF Web APIs to serialize to a Person object. In this example, the HttpClient is being passed into the constructor by MVC’s dependency resolver – in this case, I’m using StructureMap as an IoC and my StructureMap initialization code looks like this: 1: using StructureMap; 2: using System.Net.Http; 3:   4: namespace FakeChannelExample 5: { 6: public static class IoC 7: { 8: public static IContainer Initialize() 9: { 10: ObjectFactory.Initialize(x => 11: { 12: x.For<HttpClient>().Use(() => new HttpClient("http://localhost:31614/")); 13: }); 14: return ObjectFactory.Container; 15: } 16: } 17: } My controller code currently depends on a concrete instance of the HttpClient. Now I *could* create some sort of interface and wrap the HttpClient in this interface and use that object inside my controller instead – however, there are a few why reasons that is not desirable: For one thing, the API provided by the HttpClient provides nice features for dealing with HTTP services. I don’t really *want* these to look like C# RPC method calls – when HTTP services have REST features, I may want to inspect HTTP response headers and hypermedia contained within the message so that I can make intelligent decisions as to what to do next in my workflow (although I don’t happen to be doing these things in my example above) – this type of workflow is common in hypermedia REST scenarios. If I just encapsulate HttpClient behind some IRepository interface and make it look like a C# RPC method call, it will become difficult to take advantage of these types of things. Second, it could get pretty mind-numbing to have to create interfaces all over the place just to wrap the HttpClient. Then you’re probably going to have to hard-code HTTP knowledge into your code to formulate requests rather than just “following the links” that the hypermedia in a message might provide. Third, at first glance it might appear that we need to create an interface to facilitate unit testing, but actually it’s unnecessary. Even though the code above is dependent on a concrete type, it’s actually very easy to fake the data in a unit test. The HttpClient provides a Channel property (of type HttpMessageChannel) which allows you to create a fake message channel which can be leveraged in unit testing. In this case, what I want is to be able to write a unit test that just returns fake data. I also want this to be as re-usable as possible for my unit testing. I want to be able to write a unit test that looks like this: 1: [TestClass] 2: public class HomeControllerTest 3: { 4: [TestMethod] 5: public void Index() 6: { 7: // Arrange 8: var httpClient = new HttpClient("http://foo.com"); 9: httpClient.Channel = new FakeHttpChannel<Person>(new Person { FirstName = "Joe", LastName = "Blow" }); 10:   11: HomeController controller = new HomeController(httpClient); 12:   13: // Act 14: ViewResult result = controller.Index() as ViewResult; 15:   16: // Assert 17: Assert.AreEqual("Joe Blow", result.ViewBag.Message); 18: } 19: } Notice on line #9, I’m setting the Channel property of the HttpClient to be a fake channel. I’m also specifying the fake object that I want to be in the response on my “fake” Http request. I don’t need to rely on any mocking frameworks to do this. All I need is my FakeHttpChannel. The code to do this is not complex: 1: using System; 2: using System.IO; 3: using System.Net.Http; 4: using System.Runtime.Serialization; 5: using System.Threading; 6: using FakeChannelExample.Models; 7:   8: namespace FakeChannelExample.Tests 9: { 10: public class FakeHttpChannel<T> : HttpClientChannel 11: { 12: private T responseObject; 13:   14: public FakeHttpChannel(T responseObject) 15: { 16: this.responseObject = responseObject; 17: } 18:   19: protected override HttpResponseMessage Send(HttpRequestMessage request, CancellationToken cancellationToken) 20: { 21: return new HttpResponseMessage() 22: { 23: RequestMessage = request, 24: Content = new StreamContent(this.GetContentStream()) 25: }; 26: } 27:   28: private Stream GetContentStream() 29: { 30: var serializer = new DataContractSerializer(typeof(T)); 31: Stream stream = new MemoryStream(); 32: serializer.WriteObject(stream, this.responseObject); 33: stream.Position = 0; 34: return stream; 35: } 36: } 37: } The HttpClientChannel provides a Send() method which you can override to return any HttpResponseMessage that you want. You can see I’m using the DataContractSerializer to serialize the object and write it to a stream. That’s all you need to do. In the example above, the only thing I’ve chosen to do is to provide a way to return different response objects. But there are many more features you could add to your own re-usable FakeHttpChannel. For example, you might want to provide the ability to add HTTP headers to the message. You might want to use a different serializer other than the DataContractSerializer. You might want to provide custom hypermedia in the response as well as just an object or set HTTP response codes. This list goes on. This is the just one example of the really cool features being added to the next version of WCF to enable various HTTP scenarios. The code sample for this post can be downloaded here.

  Read the article

• Community Branching

  - by Dane Morgridge

  As some may have noticed, I have taken a liking to Ruby (and Rails in particular) quite a bit recently. This last weekend I spoke at the NYC Code Camp on a comparison of ASP.NET and Rails as well as an intro to Entity Framework talk.  I am speaking at RubyNation in April and have submitted to other ruby conferences around the area and I am also doing a Rails and MongoDB talk at the Philly Code Camp in April. Before you start to think this is my "I'm leaving .NET post", which it isn't so I need to clarify. I am not, nor do I intend to any time in the near future plan on abandoning .NET.  I am simply branching out into another community based on a development technology that I very much enjoy.  If you look at my twitter bio, you will see that I am into Entity Framework, Ruby on Rails, C++ and ASP.NET MVC, and not necessarily in that order.  I know you're probably thinking to your self that I am crazy, which is probably true on several levels (especially the C++ part). I was actually crazy enough at the NYC Code Camp to show up wearing a Linux t-shirt, presenting with my MacBook Pro on Entity Framework, ASP.NET MVC and Rails. (I did get pelted in the head with candy by Rachel Appel for it though) At all of the code camps I am submitting to this year, i will be submitting sessions on likely all four topics, and some sessions will be a combination of 2 or more.  For example, my "ASP.NET MVC: A Gateway To Rails?" talk touches ASP.NET MVC, Entity Framework Code First and Rails. Simply put (and I talk about this in my MVC & Rails talk) is that learning and using Rails has made me a better ASP.NET MVC developer. Just one example of this is helper methods.  When I started working with ASP.NET MVC, I didn't really want to use helpers and preferred to just use standard html tags, especially where links were concerned.  It was just me being stubborn and not really seeing all of the benefit of the helpers.  To my defense, coming from WebForms, I wanted to be as bare metal as possible and it seemed at first like a lot of the helpers were an unnecessary abstraction. I took my first look at Rails back in v1 and didn't spend very much time with it so I dismissed it and went on my merry ASP.NET WebForms way.  Then I picked up ASP.NET MVC and grasped the MVC pattern itself much better. After this, I took another look at Rails and everything made sense.  I decided then to learn Rails. (I think it is important for developers to learn new languages and platforms regularly so it was a natural progression for me) I wanted to learn it the right way, so when I dug into code, everyone used helpers everywhere for pretty much everything possible. I took some time to dig in and found out how helpful they were and subsequently realized how awesome they were in ASP.NET MVC also and started using them. In short, I love Rails (and Ruby in general).  I also love ASP.NET MVC and Entity Framework and yes I still love C++.  I have varying degrees of love for them individually at any given moment and it is likely to shift based on the current project I am working on.  I know you're thinking it so before you ask the question. "Which do I use when?", I'm going to give the standard developer answer of: It depends.  There are a lot of factors that I am not going to even go into that would go into a decision.  The most basic question I would ask though is,  does this project depend on .NET?  If it does, then I'd say that ASP.NET MVC is probably going to be the more logical choice and I am going to leave it at that.  I am working on projects right now in both technologies and I don't see that changing anytime soon (one project even uses both). With all that being said, you'll find me at code camps, conferences and user groups presenting on .NET, Ruby or both, writing about .NET and Ruby and I will likely be blogging on both in the future.  I know of others that have successfully branched out to other communities and with any luck I'll be successful at it too. On a (sorta) side note, I read a post by Justin Etheredge the other day that pretty much sums up my feelings about Ruby as a language.  I highly recommend checking it out: What Is So Great About Ruby?

  Read the article

• How to use Object Type Converter

  - by arun.x.sridharan(at)oracle.com

  UseCase Description A person form where in user will enter String which has to be converted to Number while persisting. From the User Interface we might be getting a String value which has to be persisted in the database as a number in that scenario we can use converters to map the java object which is of type String to its database value which is a Number. For example , there is a 'Person' table in database which is used to store the user details passed from the User Interface. It has a 'Status' column which is of the value  Number. But from the User Interface String values (Active/InActive) are passed . For persisting the user details we can use Object type converter and provide the mappings for status column corresponding to the String values. Object type converter can be used if you wanted to have a mapping for a field for example when departmentName on the entity was of String value and mapped to dept_name field on the database table which is of the value NUMBER.   Implementation steps Sample EJB API for setting the value of status on Person Entity as a String     public void createPerson(String status,String firstName,String lastName) {                Person person = new Person();                // status will be set as a String value received from the User Interface         person.setStatus(status);                person.setFirstname(firstName);        person.setLastname(lastName);                persistPerson(person);         } In the sample code shown above status is passed as a String, this has to be converted to Number. The String value obtained will be set on Person object and persistPerson API will be called for creating a new person from the values passed from the User Interface.  Steps to configure Object type converter: 1. Navigate to Person Entity from persistence.xml and navigate to status field2. Click on Conversion tab and select Converted check box3. Select Object Type Converter radio button and set the Data Type Class to      java.math.BigDecimal and Object Type Class to java.lang.String4. Specify the conversion values for all the values that can be passed from the user interface  as shown below5. Set the Default Object value

  Read the article

• JQuery Coding Question?

  - by SLAPme

  I'm kind of new to JQuery i really don't know how to code in the .hide() so that it hides the following code from begin displayed until clicked <li>Changes saved!</li> and then have it fade in using the .fadeIn. Can some one show me how to code in the .hide() and .fadeIn correctly into my JQuery code? Here is the JQuery code. $(function() { $(".save-button").click(function() { $.post($("#contact-form").attr("action"), $("#contact-form").serialize(), function(html) { $("div.contact-info-form").html(html); $('#changes-saved').append('<li>Changes saved!</li>'); }); return false; // prevent normal submit }); });

  Read the article

• Python: undefined reference to `_imp __Py_InitModule4'

  - by Mark

  I'm trying to do a debug build of the Rabbyt library using mingw's gcc to run with my MSVC built python26_d.. I got a lot of undefined references which caused me to create libpython26_d.a, however one of the undefined references remains. Googling gives me: http://www.techlists.org/archives/programming/pythonlist/2003-03/msg01035.shtml But -rdynamic doesn't help. e:\MinGW/bin\gcc.exe -mno-cygwin -mdll -O -Wall -g -IE:\code\python\python\py26\ include -IE:\code\python\python\py26\PC -c rabbyt/rabbyt._rabbyt.c -o build\temp .win32-2.6-pydebug\Debug\rabbyt\rabbyt._rabbyt.o -O3 -fno-strict-aliasing rabbyt/rabbyt._rabbyt.c:1351: warning: '__Pyx_SetItemInt' defined but not used writing build\temp.win32-2.6-pydebug\Debug\rabbyt\_rabbyt_d.def e:\MinGW/bin\gcc.exe -mno-cygwin -shared -g build\temp.win32-2.6-pydebug\Debug\r abbyt\rabbyt._rabbyt.o build\temp.win32-2.6-pydebug\Debug\rabbyt\_rabbyt_d.def - LE:\code\python\python\py26\libs -LE:\code\python\python\py26\PCbuild -lopengl32 -lglu32 -lpython26_d -lmsvcr90 -o build\lib.win32-2.6-pydebug\rabbyt\_rabbyt_d. pyd build\temp.win32-2.6-pydebug\Debug\rabbyt\rabbyt._rabbyt.o: In function `init_ra bbyt': E:/code/python/rabbyt/rabbyt/rabbyt._rabbyt.c:1121: undefined reference to `_imp __Py_InitModule4'

  Read the article

• XCode Syntax Coloring Broken

  - by sw12345

  XCode frequently seems to lose it's mind, and doesn't color code system classes or provide correct "code sense" suggestions. This is endlessly frustrating. The question has been asked on at least three other occasions: http://stackoverflow.com/questions/2263994/problems-with-xcode-syntax-highlighting http://stackoverflow.com/questions/1627033/xcode-code-sense-color-completion-not-working http://stackoverflow.com/questions/2138047/xcode-code-loses-syntax-coloring I have switched by project version to/from 3.1-compatiable and 3.2-compatiable, completely restarting XCode before and after each change with no effect. I have rebuilt the code sense indexes and completely restarted XCode with no change. I have built my project to make sure there are no errors and restarted. I have copied my files (sans .svn files) to a different location - same problem. I've already completely disabled the argument "placeholders" because they screw up my documents when i type too fast... all I'm asking for is for the "esc" key to display the correct list of properties and methods.

  Read the article

• SQL Server Cast

  - by Derek Dieter

  The SQL Server cast function is the easiest data type conversion function to be used compared to the CONVERT function. It takes only one parameter followed by the AS clause to convert a specified value. A quick example is the following:SELECT UserID_String = CAST(UserID AS varchar(50)) FROM dbo.UserThis example will convert the integer to a character value. [...]

  Read the article

• Intent.getInt() doesn't work on ICS, but works on JB

  - by ObAt

  I use this code to send parameters when I start a new Activity: Intent inputForm = new Intent(getActivity(), InputForm.class); Bundle b = new Bundle(); b.putInt("item", Integer.parseInt(mItem.id)); //Your id inputForm.putExtras(b); //Put your id to your next Intent startActivity(inputForm); And I use this code for reading the parameters in the inputForm Activity: Bundle b = getIntent().getExtras(); if (b != null) { int value = b.getInt("item"); ID = value; } Toast.makeText(getApplication(), "MIJN ID:" + Integer.toString(ID), Toast.LENGTH_LONG).show(); When I run this code on my Samsung Tab 10.1 GT-P7510 ID is alsways 0, when I run the same code on my Galaxy S3 with JB the code just works fine. Can someone help me? Thanks in advance, ObAt

  Read the article

• Naming conventions for language file keys

  - by VirtuosiMedia

  What is your strategy for naming conventions for the keys in language files used for localization? We have a team that is going to conversion of a project to multiple languages and would like to have some guidelines to follow. As an example, usually the files end up being a series of key/value pairs, with the key being the placeholder in the template for the language specific value. 'Username': 'Username', 'Enter Username': 'Enter your username here'

  Read the article

• CodePlex Daily Summary for Thursday, September 06, 2012

  CodePlex Daily Summary for Thursday, September 06, 2012Popular Releasesmenu4web: menu4web 0.4.1 - javascript menu for web sites: This release is for those who believe that global variables are evil. menu4web has been wrapped into m4w singleton object. Added "Vertical Tabs" example which illustrates object notation.WinRT XAML Toolkit: WinRT XAML Toolkit - 1.2.1: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...iPDC - Free Phasor Data Concentrator: iPDC-v1.3.1: iPDC suite version-1.3.1, Modifications and Bug Fixed (from v 1.3.0) New User Manual for iPDC-v1.3.1 available on websites. Bug resolved : PMU Simulator TCP connection error and hang connection for client (PDC). Now PMU Simulator (server) can communicate more than one PDCs (clients) over TCP and UDP parallely. PMU Simulator is now sending the exact data frames as mentioned in data rate by user. PMU Simulator data rate has been verified by iPDC database entries and PMU Connection Tes...Microsoft SQL Server Product Samples: Database: AdventureWorks OData Feed: The AdventureWorks OData service exposes resources based on specific SQL views. The SQL views are a limited subset of the AdventureWorks database that results in several consuming scenarios: CompanySales Documents ManufacturingInstructions ProductCatalog TerritorySalesDrilldown WorkOrderRouting How to install the sample You can consume the AdventureWorks OData feed from http://services.odata.org/AdventureWorksV3/AdventureWorks.svc. You can also consume the AdventureWorks OData fe...Desktop Google Reader: 1.4.6: Sorting feeds alphabetical is now optional (see preferences window)DotNetNuke® Community Edition CMS: 06.02.03: Major Highlights Fixed issue where mailto: links were not working when sending bulk email Fixed issue where uses did not see friendship relationships Problem is in 6.2, which does not show in the Versions Affected list above. Fixed the issue with cascade deletes in comments in CoreMessaging_Notification Fixed UI issue when using a date fields as a required profile property during user registration Fixed error when running the product in debug mode Fixed visibility issue when...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.65: Fixed null-reference error in the build task constructor.Active Forums for DotNetNuke CMS: Active Forums 5.0.0 RC: RC release of Active Forums 5.0.Droid Explorer: Droid Explorer 0.8.8.7 Beta: Bug in the display icon for apk's, will fix with next release Added fallback icon if unable to get the image/icon from the Cloud Service Removed some stale plugins that were either out dated or incomplete. Added handler for *.ab files for restoring backups Added plugin to create device backups Backups stored in %USERPROFILE%\Android Backups\%DEVICE_ID%\ Added custom folder icon for the android backups directory better error handling for installing an apk bug fixes for the Runn...BI System Monitor: v2.1: Data Audits report and supporting SQL, and SSIS package Environment Overview report enhancements, improving the appearance, addition of data audit finding indicators Note: SQL 2012 version coming soon.Hidden Capture (HC): Hidden Capture 1.1: Hidden Capture 1.1 by Mohsen E.Dawatgar http://Hidden-Capture.blogfa.comExt Spec: Ext Spec 0.2.1: Refined examples and improved distribution options.The Visual Guide for Building Team Foundation Server 2012 Environments: Version 1: --Nearforums - ASP.NET MVC forum engine: Nearforums v8.5: Version 8.5 of Nearforums, the ASP.NET MVC Forum Engine. New features include: Built-in search engine using Lucene.NET Flood control improvements Notifications improvements: sync option and mail body View Roadmap for more details webdeploy package sha1 checksum: 961aff884a9187b6e8a86d68913cdd31f8deaf83WiX Toolset: WiX Toolset v3.6: WiX Toolset v3.6 introduces the Burn bootstrapper/chaining engine and support for Visual Studio 2012 and .NET Framework 4.5. Other minor functionality includes: WixDependencyExtension supports dependency checking among MSI packages. WixFirewallExtension supports more features of Windows Firewall. WixTagExtension supports Software Id Tagging. WixUtilExtension now supports recursive directory deletion. Melt simplifies pure-WiX patching by extracting .msi package content and updating .w...Iveely Search Engine: Iveely Search Engine （0.2.0）: ????ISE?0.1.0??，?????，ISE?0.2.0?????????，???????，????????20???follow?ISE，????，??ISE??????????，??????????，?????????，?????????0.2.0??????，??????????。 Iveely Search Engine ?0.2.0?????????“??????????”，??????，?????????，???????，???????????????????，????、????????????。???0.1.0????????????： 1. ??“????” ??。??????????，?????????，???????????????????。??：????????，????????????，??????????????????。??????。 2. ??“????”??。?0.1.0??????，???????，???????????????，?????????????，????????，?0.2.0?，???????...GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.DotNetNuke® Form and List: 06.00.04: DotNetNuke Form and List 06.00.04 Don't forget to backup your installation before upgrade. Changes in 06.00.04 Fix: Sql Scripts for 6.003 missed object qualifiers within stored procedures Fix: added missing resource "cmdCancel.Text" in form.ascx.resx Changes in 06.00.03 Fix: MakeThumbnail was broken if the application pool was configured to .Net 4 Change: Data is now stored in nvarchar(max) instead of ntext Changes in 06.00.02 The scripts are now compatible with SQL Azure, tested in a ne...Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.New ProjectsAny-Service: AnyService is a .net 4.0 Windows service shell. It hosts any windows application in non-gui mode to run as a service.BabyCloudDrives - the multi cloud drive desktop's application: wpf ????BLACK ORANGE: Download The HPAD TEXT EDITOR and use it Wisely.. CodePlex New Release Checker: CodePlex New Release Checker is a small library that makes it easy to add, "New Version Available!" functionality to your CodePlex project.Collect: ????????！CSVManager: CSV??CSV?????，????CSV??，??????Exam Project: My Exam Project. Computer Vision, C and OpenCV-FTP: Hey guys thanks for checking out my ftp!Haushaltsbuch: 1ModMaker.Lua: ModMaker.Lua is an open source .NET library that parses and executes Lua code.MyJabbr: MyJabbr netduinoscope: Design shield and software to use netduino as oscilloscopeNetSurveillance Web Application: Net Surveillance Web ApplicationNiconicoApiHelper: ????API?????????OStega: A simple library for encrypt text into an bmp or png image.OURORM: ormTFS Cloud Deployment Toolkit: The TFS Cloud Deployment Toolkit is a set of tools that integrate with TFS 2010 to help manage configuration and deployment to various remote environments.The Visual Guide for Building Team Foundation Server 2012 Environments: A step-by-step guide for building Team Foundation Server 2012 environments that include SharePoint Server 2010, SQL Server 2012, Windows Server 2012 and more!WinRT LineChart: An attempt at creating an usable LineChart for everyone to use in his/her own Windows 8 Apps

  Read the article

• Flex: Result event given multiple times

  - by Tom

  Hello everybody!! I am trying to learn Flex and now i have the next code: http://pastebin.com/rZwxF7w1 This code is for my login component. I want to get a special string for encrypting my password. This string is given by my authservice. But when i login i get a multiple times a alert with Done(line 69 in the pastebin code or line 4 in the code on the bottom of this question). But i want that it shows one single time. Does someone know what is wrong with this code? Tom protected function tryLogin():void { encryptStringResult.addEventListener('result', function(event:ResultEvent):void { var encryptString:String = event.result.toString(); Alert.show('Done'); }); encryptStringResult.token = auth.getEncryptString(); }

  Read the article

• mercurial: less duplication in hgrc file

  - by zaharpopov

  Hi there. I have using Hg for some projects on my google code hosting. For each projects I set in [auth] section of .hgrc the username/password to push without every asking for password. But it is lots of duplication like: [auth] proj1.prefix = ... 111 proj1.username = google code username proj1.password = google code password proj2.prefix = ... 222 proj2.username = google code username proj2.password = google code password Can this somehow be doing with less duplications? Maybe set variable in hgrc and refer to it from all username/password lines? Thanks in advance for your help

  Read the article

• Ext.TabPanel html help...

  - by Simon

  add({ title: args.node.id, iconCls: 'tabs', items: [{html: '<code class="prettyprint"><?php\necho \'Hello World!\';</code>', width: '100%', hieght: '100%', plain: true}], closable: true }).show(); I am running the above method on Ext.TabPanel and it is returning '' as the html... If I do <code class="prettyprint"><html><head><title>Whatever</title></head><body.The body!</body></html></code> It just renders The body!... how can I get it to display the source code?? Many thanks...

  Read the article

• hibernate show real sql

  - by tommaso

  Hi all, if I set <property name="show_sql">true</property> in my hibernate.cfg.xml configuration file in the console I can see the sql. But it's not REAL sql... Can I see the SQL code that will be passed directly to database? Example: I see select this_.code from true.employee this_ where this_.code=? Can I see select employee.code from employee where employee.code=12 the real sql? thanks!

  Read the article

• codemirror fails when adding </textarea> tag inside it

  - by Jorre

  I'm using codemirror http://marijn.haverbeke.nl/codemirror/ to let users create their own web templates inside a web application. Codemirror works great, except for the time that users have put a tag inside their source code. When I load that up inside code mirror, it breaks everything in the source code that follows after because it thinks my codemirror text area is closed. I'm using the following way to launch codemirror: CodeMirror.fromTextArea('code') It works great on my existing textarea "code" except when users add inside their templates (in the codemirror textarea). Any help is much appreciated!

  Read the article

< Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >