Search Results

Search found 51790 results on 2072 pages for 'long running'.

Page 479/2072 | < Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >

• A Technique for Performing Cross-host Upgrades to FMW 11gR1

  - by reza.shafii

  The main tool used for the upgrade of iAS 10g mid-tier (data not stored in 10g meta-data repository schemas) environments to Fusion Middleware (FMW) 11gR1 is the FMW Upgrade Assistant (UA). This tool performs what we call an out-of-place upgrade which in a nut-shell means the following: Upgrade is performed by pointing the UA to a 10g source topology as well as an 11g destination topology. The destination topology must be created, using the standard FMW 11g installation and configuration process, prior to the execution of the UA. The UA carries over all of the required changes from the source environment to the destination. This approach has a number of advantages rooted in the fact that the source environment - which is presumably working well and serving its needs - is not disturbed during the upgrade process as the UA only performs read-only operations on it. The UA today can only perform such out-of-place upgrades when the source and destination topologies reside on the same machine. This can sometimes be an issue when the host on which the iAS 10g environment is installed is running at full capacity and installing new hardware for the purpose of the upgrade (in most cases what would be needed is extra memory) is completely infeasible. In such cases, upgrade across a different host is still possible by using the following technique: Backup your source environment and restore it on to a target machine. The backup and restore procedures for the iAS 10.1.2 components are described within this section of the release's Administration Guide. As described in the docs, the Oracle Application Server Backup and Recovery Tool provides capabilities for backing up the installation on one machine and restoring it on another which is exactly what you want to do for the purpose of cross host upgrade. Ensure that the restored environment on your target host is fully functional. Go through the upgrade steps on the target machine to perform the out-of-place upgrade using the UA. Although this process does add another big step to the overall upgrade process, it does make it possible to perform a cross-host upgrade to 11gR1 when necessary. The easiest approach would of course be to find a way of ensuring that the required hardware capacity for upgrade is available on the original 10g host. Using techniques such as scheduling the upgrade at low traffic times and/or temporarily stopping other processes running on the machine to clear up some memory might provide you the sufficient memory needed to perform the out-of-place upgrade and save you the need for using the backup/restore technique I have described in this post.

  Read the article

• Windows Azure Service Bus Splitter and Aggregator

  - by Alan Smith

  This article will cover basic implementations of the Splitter and Aggregator patterns using the Windows Azure Service Bus. The content will be included in the next release of the “Windows Azure Service Bus Developer Guide”, along with some other patterns I am working on. I’ve taken the pattern descriptions from the book “Enterprise Integration Patterns” by Gregor Hohpe. I bought a copy of the book in 2004, and recently dusted it off when I started to look at implementing the patterns on the Windows Azure Service Bus. Gregor has also presented an session in 2011 “Enterprise Integration Patterns: Past, Present and Future” which is well worth a look. I’ll be covering more patterns in the coming weeks, I’m currently working on Wire-Tap and Scatter-Gather. There will no doubt be a section on implementing these patterns in my “SOA, Connectivity and Integration using the Windows Azure Service Bus” course. There are a number of scenarios where a message needs to be divided into a number of sub messages, and also where a number of sub messages need to be combined to form one message. The splitter and aggregator patterns provide a definition of how this can be achieved. This section will focus on the implementation of basic splitter and aggregator patens using the Windows Azure Service Bus direct programming model. In BizTalk Server receive pipelines are typically used to implement the splitter patterns, with sequential convoy orchestrations often used to aggregate messages. In the current release of the Service Bus, there is no functionality in the direct programming model that implements these patterns, so it is up to the developer to implement them in the applications that send and receive messages. Splitter A message splitter takes a message and spits the message into a number of sub messages. As there are different scenarios for how a message can be split into sub messages, message splitters are implemented using different algorithms. The Enterprise Integration Patterns book describes the splatter pattern as follows: How can we process a message if it contains multiple elements, each of which may have to be processed in a different way? Use a Splitter to break out the composite message into a series of individual messages, each containing data related to one item. The Enterprise Integration Patterns website provides a description of the Splitter pattern here. In some scenarios a batch message could be split into the sub messages that are contained in the batch. The splitting of a message could be based on the message type of sub-message, or the trading partner that the sub message is to be sent to. Aggregator An aggregator takes a stream or related messages and combines them together to form one message. The Enterprise Integration Patterns book describes the aggregator pattern as follows: How do we combine the results of individual, but related messages so that they can be processed as a whole? Use a stateful filter, an Aggregator, to collect and store individual messages until a complete set of related messages has been received. Then, the Aggregator publishes a single message distilled from the individual messages. The Enterprise Integration Patterns website provides a description of the Aggregator pattern here. A common example of the need for an aggregator is in scenarios where a stream of messages needs to be combined into a daily batch to be sent to a legacy line-of-business application. The BizTalk Server EDI functionality provides support for batching messages in this way using a sequential convoy orchestration. Scenario The scenario for this implementation of the splitter and aggregator patterns is the sending and receiving of large messages using a Service Bus queue. In the current release, the Windows Azure Service Bus currently supports a maximum message size of 256 KB, with a maximum header size of 64 KB. This leaves a safe maximum body size of 192 KB. The BrokeredMessage class will support messages larger than 256 KB; in fact the Size property is of type long, implying that very large messages may be supported at some point in the future. The 256 KB size restriction is set in the service bus components that are deployed in the Windows Azure data centers. One of the ways of working around this size restriction is to split large messages into a sequence of smaller sub messages in the sending application, send them via a queue, and then reassemble them in the receiving application. This scenario will be used to demonstrate the pattern implementations. Implementation The splitter and aggregator will be used to provide functionality to send and receive large messages over the Windows Azure Service Bus. In order to make the implementations generic and reusable they will be implemented as a class library. The splitter will be implemented in the LargeMessageSender class and the aggregator in the LargeMessageReceiver class. A class diagram showing the two classes is shown below. Implementing the Splitter The splitter will take a large brokered message, and split the messages into a sequence of smaller sub-messages that can be transmitted over the service bus messaging entities. The LargeMessageSender class provides a Send method that takes a large brokered message as a parameter. The implementation of the class is shown below; console output has been added to provide details of the splitting operation. public class LargeMessageSender {     private static int SubMessageBodySize = 192 * 1024;     private QueueClient m_QueueClient;       public LargeMessageSender(QueueClient queueClient)     {         m_QueueClient = queueClient;     }       public void Send(BrokeredMessage message)     {         // Calculate the number of sub messages required.         long messageBodySize = message.Size;         int nrSubMessages = (int)(messageBodySize / SubMessageBodySize);         if (messageBodySize % SubMessageBodySize != 0)         {             nrSubMessages++;         }           // Create a unique session Id.         string sessionId = Guid.NewGuid().ToString();         Console.WriteLine("Message session Id: " + sessionId);         Console.Write("Sending {0} sub-messages", nrSubMessages);           Stream bodyStream = message.GetBody<Stream>();         for (int streamOffest = 0; streamOffest < messageBodySize;             streamOffest += SubMessageBodySize)         {                                     // Get the stream chunk from the large message             long arraySize = (messageBodySize - streamOffest) > SubMessageBodySize                 ? SubMessageBodySize : messageBodySize - streamOffest;             byte[] subMessageBytes = new byte[arraySize];             int result = bodyStream.Read(subMessageBytes, 0, (int)arraySize);             MemoryStream subMessageStream = new MemoryStream(subMessageBytes);               // Create a new message             BrokeredMessage subMessage = new BrokeredMessage(subMessageStream, true);             subMessage.SessionId = sessionId;               // Send the message             m_QueueClient.Send(subMessage);             Console.Write(".");         }         Console.WriteLine("Done!");     }} The LargeMessageSender class is initialized with a QueueClient that is created by the sending application. When the large message is sent, the number of sub messages is calculated based on the size of the body of the large message. A unique session Id is created to allow the sub messages to be sent as a message session, this session Id will be used for correlation in the aggregator. A for loop in then used to create the sequence of sub messages by creating chunks of data from the stream of the large message. The sub messages are then sent to the queue using the QueueClient. As sessions are used to correlate the messages, the queue used for message exchange must be created with the RequiresSession property set to true. Implementing the Aggregator The aggregator will receive the sub messages in the message session that was created by the splitter, and combine them to form a single, large message. The aggregator is implemented in the LargeMessageReceiver class, with a Receive method that returns a BrokeredMessage. The implementation of the class is shown below; console output has been added to provide details of the splitting operation.   public class LargeMessageReceiver {     private QueueClient m_QueueClient;       public LargeMessageReceiver(QueueClient queueClient)     {         m_QueueClient = queueClient;     }       public BrokeredMessage Receive()     {         // Create a memory stream to store the large message body.         MemoryStream largeMessageStream = new MemoryStream();           // Accept a message session from the queue.         MessageSession session = m_QueueClient.AcceptMessageSession();         Console.WriteLine("Message session Id: " + session.SessionId);         Console.Write("Receiving sub messages");           while (true)         {             // Receive a sub message             BrokeredMessage subMessage = session.Receive(TimeSpan.FromSeconds(5));               if (subMessage != null)             {                 // Copy the sub message body to the large message stream.                 Stream subMessageStream = subMessage.GetBody<Stream>();                 subMessageStream.CopyTo(largeMessageStream);                   // Mark the message as complete.                 subMessage.Complete();                 Console.Write(".");             }             else             {                 // The last message in the sequence is our completeness criteria.                 Console.WriteLine("Done!");                 break;             }         }                     // Create an aggregated message from the large message stream.         BrokeredMessage largeMessage = new BrokeredMessage(largeMessageStream, true);         return largeMessage;     } }   The LargeMessageReceiver initialized using a QueueClient that is created by the receiving application. The receive method creates a memory stream that will be used to aggregate the large message body. The AcceptMessageSession method on the QueueClient is then called, which will wait for the first message in a message session to become available on the queue. As the AcceptMessageSession can throw a timeout exception if no message is available on the queue after 60 seconds, a real-world implementation should handle this accordingly. Once the message session as accepted, the sub messages in the session are received, and their message body streams copied to the memory stream. Once all the messages have been received, the memory stream is used to create a large message, that is then returned to the receiving application. Testing the Implementation The splitter and aggregator are tested by creating a message sender and message receiver application. The payload for the large message will be one of the webcast video files from http://www.cloudcasts.net/, the file size is 9,697 KB, well over the 256 KB threshold imposed by the Service Bus. As the splitter and aggregator are implemented in a separate class library, the code used in the sender and receiver console is fairly basic. The implementation of the main method of the sending application is shown below.   static void Main(string[] args) {     // Create a token provider with the relevant credentials.     TokenProvider credentials =         TokenProvider.CreateSharedSecretTokenProvider         (AccountDetails.Name, AccountDetails.Key);       // Create a URI for the serivce bus.     Uri serviceBusUri = ServiceBusEnvironment.CreateServiceUri         ("sb", AccountDetails.Namespace, string.Empty);       // Create the MessagingFactory     MessagingFactory factory = MessagingFactory.Create(serviceBusUri, credentials);       // Use the MessagingFactory to create a queue client     QueueClient queueClient = factory.CreateQueueClient(AccountDetails.QueueName);       // Open the input file.     FileStream fileStream = new FileStream(AccountDetails.TestFile, FileMode.Open);       // Create a BrokeredMessage for the file.     BrokeredMessage largeMessage = new BrokeredMessage(fileStream, true);       Console.WriteLine("Sending: " + AccountDetails.TestFile);     Console.WriteLine("Message body size: " + largeMessage.Size);     Console.WriteLine();         // Send the message with a LargeMessageSender     LargeMessageSender sender = new LargeMessageSender(queueClient);     sender.Send(largeMessage);       // Close the messaging facory.     factory.Close();  } The implementation of the main method of the receiving application is shown below. static void Main(string[] args) {       // Create a token provider with the relevant credentials.     TokenProvider credentials =         TokenProvider.CreateSharedSecretTokenProvider         (AccountDetails.Name, AccountDetails.Key);       // Create a URI for the serivce bus.     Uri serviceBusUri = ServiceBusEnvironment.CreateServiceUri         ("sb", AccountDetails.Namespace, string.Empty);       // Create the MessagingFactory     MessagingFactory factory = MessagingFactory.Create(serviceBusUri, credentials);       // Use the MessagingFactory to create a queue client     QueueClient queueClient = factory.CreateQueueClient(AccountDetails.QueueName);       // Create a LargeMessageReceiver and receive the message.     LargeMessageReceiver receiver = new LargeMessageReceiver(queueClient);     BrokeredMessage largeMessage = receiver.Receive();       Console.WriteLine("Received message");     Console.WriteLine("Message body size: " + largeMessage.Size);       string testFile = AccountDetails.TestFile.Replace(@"\In\", @"\Out\");     Console.WriteLine("Saving file: " + testFile);       // Save the message body as a file.     Stream largeMessageStream = largeMessage.GetBody<Stream>();     largeMessageStream.Seek(0, SeekOrigin.Begin);     FileStream fileOut = new FileStream(testFile, FileMode.Create);     largeMessageStream.CopyTo(fileOut);     fileOut.Close();       Console.WriteLine("Done!"); } In order to test the application, the sending application is executed, which will use the LargeMessageSender class to split the message and place it on the queue. The output of the sender console is shown below. The console shows that the body size of the large message was 9,929,365 bytes, and the message was sent as a sequence of 51 sub messages. When the receiving application is executed the results are shown below. The console application shows that the aggregator has received the 51 messages from the message sequence that was creating in the sending application. The messages have been aggregated to form a massage with a body of 9,929,365 bytes, which is the same as the original large message. The message body is then saved as a file. Improvements to the Implementation The splitter and aggregator patterns in this implementation were created in order to show the usage of the patterns in a demo, which they do quite well. When implementing these patterns in a real-world scenario there are a number of improvements that could be made to the design. Copying Message Header Properties When sending a large message using these classes, it would be great if the message header properties in the message that was received were copied from the message that was sent. The sending application may well add information to the message context that will be required in the receiving application. When the sub messages are created in the splitter, the header properties in the first message could be set to the values in the original large message. The aggregator could then used the values from this first sub message to set the properties in the message header of the large message during the aggregation process. Using Asynchronous Methods The current implementation uses the synchronous send and receive methods of the QueueClient class. It would be much more performant to use the asynchronous methods, however doing so may well affect the sequence in which the sub messages are enqueued, which would require the implementation of a resequencer in the aggregator to restore the correct message sequence. Handling Exceptions In order to keep the code readable no exception handling was added to the implementations. In a real-world scenario exceptions should be handled accordingly.

  Read the article

• QJackCtl - Alsa Unknown driver

  - by user69458

  Here's my problem : I just have installed QJackCtl on my Ubuntu 12.04 and when I start Jack I got this issue : 12:01:22.769 /usr/local/bin/jackd -dalsa -dhw:0 -r44100 -p1024 -n3 -i1 -o2 Cannot connect to server socket err = Aucun fichier ou dossier de ce type Cannot connect to server socket jack server is not running or cannot be started Unknown driver "alsa" If anyone knows the solution It would help me a lot !

  Read the article

• Book &ldquo;Team Foundation Server 2012 Starter&rdquo; published

  - by terje

  During the summer and fall this year, me and my colleague Jakob Ehn has worked together on a book project that has now finally hit the stores! The title of the book is Team Foundation Server 2012 Starter and is published by Packt Publishing. Get it from http://www.packtpub.com/team-foundation-server-2012-starter/book or from Amazon http://www.amazon.com/dp/1849688389                     The book is part of a concept that Packt have with starter-books, intended for people new to Team Foundation Server 2012 and who want a quick guideline to get it up and working.  It covers the fundamentals, from installing and configuring it, and how to use it with source control, work items and builds. It is done as a step-by-step guide, but also includes best practices advice in the different areas. It covers the use of both the on-premises and the TFS Services version. It also has a list of links and references in the end to the most relevant Visual Studio 2012 ALM sites. Our good friend and fellow ALM MVP Mathias Olausson have done the review of the book, thanks again Mathias! We hope the book fills the gap between the different online guide sites and the more advanced books that are out. Book Description Your quick start guide to TFS 2012, top features, and best practices with hands on examples Overview Install TFS 2012 from scratch Get up and running with your first project Streamline release cycles for maximum productivity In Detail Team Foundation Server 2012 is Microsoft's leading ALM tool, integrating source control, work item and process handling, build automation, and testing. This practical "Team Foundation Server 2012 Starter Guide" will provide you with clear step-by-step exercises covering all major aspects of the product. This is essential reading for anyone wishing to set up, organize, and use TFS server. This hands-on guide looks at the top features in Team Foundation Server 2012, starting with a quick installation guide and then moving into using it for your software development projects. Manage your team projects with Team Explorer, one of the many new features for 2012. Covering all the main features in source control to help you work more efficiently, including tools for branching and merging, we will delve into the Agile Planning Tools for planning your product and sprint backlogs. Learn to set up build automation, allowing your team to become faster, more streamlined, and ultimately more productive with this "Team Foundation Server 2012 Starter Guide". What you will learn from this book Install TFS 2012 on premise Access TFS Services in the cloud Quickly get started with a new project with product backlogs, source control, and build automation Work efficiently with source control using the top features Understand how the tools for branching and merging in TFS 2012 help you isolate work and teams Learn about the existing process templates, such as Visual Studio Scrum 2.0 Manage your product and sprint backlogs using the Agile planning tools Approach This Starter guide is a short, sharp introduction to Team Foundation Server 2012, covering everything you need to get up and running. Who this book is written for If you are a developer, project lead, tester, or IT administrator working with Team Foundation Server 2012 this guide will get you up to speed quickly and with minimal effort.

  Read the article

• SQL SERVER – Saturday Fun Puzzle with SQL Server DATETIME2 and CAST

  - by pinaldave

  Note: I have used SQL Server 2012 for this small fun experiment. Here is what we are going to do. We will run the script one at time instead of running them all together and try to guess the answer. I am confident that many will get it correct but if you do not get correct, you learn something new. Let us create database and sample table. CREATE DATABASE DB2012 GO USE DB2012 GO CREATE TABLE TableDT (DT1 VARCHAR(100), DT2 DATETIME2, DT1C AS DT1, DT2C AS DT2); INSERT INTO TableDT (DT1, DT2) SELECT GETDATE(), GETDATE() GO There are four columns in the table. The first column DT1 is regular VARCHAR and second DT2 is DATETIME2. Both of the column are been populated with the same data as I have used the function GETDATE(). Now let us do the SELECT statement and get the result from both the columns. Before running the query please guess the answer and write it down on the paper or notepad. Question 1: Guess the resultset SELECT DT1, DT2 FROM TableDT GO Now once again run the select statement on the same table but this time retrieve the computed columns only. Once again I suggest you write down the result on the notepad. Question 2: Guess the resultset SELECT DT1C, DT2C FROM TableDT GO Now here is the best part. Let us use the CAST function over the computed columns. Here I do want you to stop and guess the answer for sure. If you have not done it so far, stop do it, believe me you will like it. Question 3: Guess the resultset SELECT CAST(DT1C AS DATETIME2) CDT1C, CAST(DT2C AS DATETIME2) CDT1C FROM TableDT GO Now let us inspect all the answers together and see how many of you got it correct. Answer 1: Answer 2: Answer 3:  If you have not tried to run the script so far, you can execute all the three of the above script together over here and see the result together. SELECT CAST(DT1C AS DATETIME2) CDT1C, CAST(DT2C AS DATETIME2) CDT1C FROM TableDT GO Here is the Saturday Fun question to you – why do we get same result from both of the expressions in Question 3, where as in question 2 both the expression have different answer. I will publish the valid answer with explanation in future blog posts. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL DateTime, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Why does Akonadi on KDE 4.6.0 refuse to start?

  - by Patches

  Akonadi refuses to start on my fresh installation of KDE 4.6.0 from the kubuntu-backports PPA on Ubuntu 10.10 Maverick Meerkat, preventing me from usking KMail. Here is the full error output: patches@pleistocene:~/.local/share$ akonadictl start Starting Akonadi Server... done. patches@pleistocene:~/.local/share$ Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString) search paths: ("/home/patches/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin", "/sbin", "/bin", "/usr/games", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin") Found mysql_install_db: "/usr/bin/mysql_install_db" Found mysqlcheck: "/usr/bin/mysqlcheck" Database process exited unexpectedly during initial connection! executable: "/usr/sbin/mysqld-akonadi" arguments: ("--defaults-file=/home/patches/.local/share/akonadi//mysql.conf", "--datadir=/home/patches/.local/share/akonadi/db_data/", "--socket=/home/patches/.local/share/akonadi/socket-pleistocene/mysql.socket") stdout: "" stderr: "Could not open required defaults file: /home/patches/.local/share/akonadi//mysql.conf Fatal error in defaults handling. Program aborted 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld-akonadi: Can't find file: './mysql/plugin.frm' (errno: 13) 110209 16:41:12 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110209 16:41:12 InnoDB: Operating system error number 13 in a file operation. InnoDB: The error means mysqld does not have the access rights to InnoDB: the directory. InnoDB: File name ./ibdata1 InnoDB: File operation call: 'create'. InnoDB: Cannot continue operation. " exit code: 1 process error: "Unknown error" "[ 0: akonadiserver(_Z11akBacktracev+0x35) [0x8086055] 1: akonadiserver() [0x8086516] 2: [0xb772e400] 3: [0xb772e416] 4: /lib/libc.so.6(gsignal+0x51) [0xb6e9f941] 5: /lib/libc.so.6(abort+0x182) [0xb6ea2e42] 6: /usr/lib/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x8c) [0xb74d62dc] 7: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0xc4) [0x8087574] 8: /usr/lib/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0x8e) [0xb757168e] 9: /usr/lib/libQtCore.so.4(+0x103425) [0xb7581425] 10: /usr/lib/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3d) [0xb758295d] 11: akonadiserver(_ZN6QDebugD1Ev+0x43) [0x8081b73] 12: akonadiserver(_ZN13DbConfigMysql19startInternalServerEv+0x1c27) [0x810c177] 13: akonadiserver(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0xe3) [0x8087a23] 14: akonadiserver(_ZN7Akonadi13AkonadiServerC1EP7QObject+0xca) [0x8088b6a] 15: akonadiserver(_ZN7Akonadi13AkonadiServer8instanceEv+0x48) [0x808a1d8] 16: akonadiserver(main+0x364) [0x8080fb4] 17: /lib/libc.so.6(__libc_start_main+0xe7) [0xb6e8bce7] 18: akonadiserver() [0x8080b81] ] " ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error) search paths: ("/home/patches/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin", "/sbin", "/bin", "/usr/games", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin") Found mysql_install_db: "/usr/bin/mysql_install_db" Found mysqlcheck: "/usr/bin/mysqlcheck" Database process exited unexpectedly during initial connection! executable: "/usr/sbin/mysqld-akonadi" arguments: ("--defaults-file=/home/patches/.local/share/akonadi//mysql.conf", "--datadir=/home/patches/.local/share/akonadi/db_data/", "--socket=/home/patches/.local/share/akonadi/socket-pleistocene/mysql.socket") stdout: "" stderr: "Could not open required defaults file: /home/patches/.local/share/akonadi//mysql.conf Fatal error in defaults handling. Program aborted 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld-akonadi: Can't find file: './mysql/plugin.frm' (errno: 13) 110209 16:41:12 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110209 16:41:12 InnoDB: Operating system error number 13 in a file operation. InnoDB: The error means mysqld does not have the access rights to InnoDB: the directory. InnoDB: File name ./ibdata1 InnoDB: File operation call: 'create'. InnoDB: Cannot continue operation. " exit code: 1 process error: "Unknown error" "[ 0: akonadiserver(_Z11akBacktracev+0x35) [0x8086055] 1: akonadiserver() [0x8086516] 2: [0xb77ae400] 3: [0xb77ae416] 4: /lib/libc.so.6(gsignal+0x51) [0xb6f1f941] 5: /lib/libc.so.6(abort+0x182) [0xb6f22e42] 6: /usr/lib/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x8c) [0xb75562dc] 7: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0xc4) [0x8087574] 8: /usr/lib/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0x8e) [0xb75f168e] 9: /usr/lib/libQtCore.so.4(+0x103425) [0xb7601425] 10: /usr/lib/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3d) [0xb760295d] 11: akonadiserver(_ZN6QDebugD1Ev+0x43) [0x8081b73] 12: akonadiserver(_ZN13DbConfigMysql19startInternalServerEv+0x1c27) [0x810c177] 13: akonadiserver(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0xe3) [0x8087a23] 14: akonadiserver(_ZN7Akonadi13AkonadiServerC1EP7QObject+0xca) [0x8088b6a] 15: akonadiserver(_ZN7Akonadi13AkonadiServer8instanceEv+0x48) [0x808a1d8] 16: akonadiserver(main+0x364) [0x8080fb4] 17: /lib/libc.so.6(__libc_start_main+0xe7) [0xb6f0bce7] 18: akonadiserver() [0x8080b81] ] " ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error) search paths: ("/home/patches/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin", "/sbin", "/bin", "/usr/games", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin") Found mysql_install_db: "/usr/bin/mysql_install_db" Found mysqlcheck: "/usr/bin/mysqlcheck" Database process exited unexpectedly during initial connection! executable: "/usr/sbin/mysqld-akonadi" arguments: ("--defaults-file=/home/patches/.local/share/akonadi//mysql.conf", "--datadir=/home/patches/.local/share/akonadi/db_data/", "--socket=/home/patches/.local/share/akonadi/socket-pleistocene/mysql.socket") stdout: "" stderr: "Could not open required defaults file: /home/patches/.local/share/akonadi//mysql.conf Fatal error in defaults handling. Program aborted 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld-akonadi: Can't find file: './mysql/plugin.frm' (errno: 13) 110209 16:41:12 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110209 16:41:12 InnoDB: Operating system error number 13 in a file operation. InnoDB: The error means mysqld does not have the access rights to InnoDB: the directory. InnoDB: File name ./ibdata1 InnoDB: File operation call: 'create'. InnoDB: Cannot continue operation. " exit code: 1 process error: "Unknown error" "[ 0: akonadiserver(_Z11akBacktracev+0x35) [0x8086055] 1: akonadiserver() [0x8086516] 2: [0xb778b400] 3: [0xb778b416] 4: /lib/libc.so.6(gsignal+0x51) [0xb6efc941] 5: /lib/libc.so.6(abort+0x182) [0xb6effe42] 6: /usr/lib/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x8c) [0xb75332dc] 7: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0xc4) [0x8087574] 8: /usr/lib/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0x8e) [0xb75ce68e] 9: /usr/lib/libQtCore.so.4(+0x103425) [0xb75de425] 10: /usr/lib/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3d) [0xb75df95d] 11: akonadiserver(_ZN6QDebugD1Ev+0x43) [0x8081b73] 12: akonadiserver(_ZN13DbConfigMysql19startInternalServerEv+0x1c27) [0x810c177] 13: akonadiserver(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0xe3) [0x8087a23] 14: akonadiserver(_ZN7Akonadi13AkonadiServerC1EP7QObject+0xca) [0x8088b6a] 15: akonadiserver(_ZN7Akonadi13AkonadiServer8instanceEv+0x48) [0x808a1d8] 16: akonadiserver(main+0x364) [0x8080fb4] 17: /lib/libc.so.6(__libc_start_main+0xe7) [0xb6ee8ce7] 18: akonadiserver() [0x8080b81] ] " ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error) search paths: ("/home/patches/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin", "/sbin", "/bin", "/usr/games", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin") Found mysql_install_db: "/usr/bin/mysql_install_db" Found mysqlcheck: "/usr/bin/mysqlcheck" Database process exited unexpectedly during initial connection! executable: "/usr/sbin/mysqld-akonadi" arguments: ("--defaults-file=/home/patches/.local/share/akonadi//mysql.conf", "--datadir=/home/patches/.local/share/akonadi/db_data/", "--socket=/home/patches/.local/share/akonadi/socket-pleistocene/mysql.socket") stdout: "" stderr: "Could not open required defaults file: /home/patches/.local/share/akonadi//mysql.conf Fatal error in defaults handling. Program aborted 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld-akonadi: Can't find file: './mysql/plugin.frm' (errno: 13) 110209 16:41:12 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110209 16:41:12 InnoDB: Operating system error number 13 in a file operation. InnoDB: The error means mysqld does not have the access rights to InnoDB: the directory. InnoDB: File name ./ibdata1 InnoDB: File operation call: 'create'. InnoDB: Cannot continue operation. " exit code: 1 process error: "Unknown error" "[ 0: akonadiserver(_Z11akBacktracev+0x35) [0x8086055] 1: akonadiserver() [0x8086516] 2: [0xb784e400] 3: [0xb784e416] 4: /lib/libc.so.6(gsignal+0x51) [0xb6fbf941] 5: /lib/libc.so.6(abort+0x182) [0xb6fc2e42] 6: /usr/lib/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x8c) [0xb75f62dc] 7: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0xc4) [0x8087574] 8: /usr/lib/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0x8e) [0xb769168e] 9: /usr/lib/libQtCore.so.4(+0x103425) [0xb76a1425] 10: /usr/lib/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3d) [0xb76a295d] 11: akonadiserver(_ZN6QDebugD1Ev+0x43) [0x8081b73] 12: akonadiserver(_ZN13DbConfigMysql19startInternalServerEv+0x1c27) [0x810c177] 13: akonadiserver(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0xe3) [0x8087a23] 14: akonadiserver(_ZN7Akonadi13AkonadiServerC1EP7QObject+0xca) [0x8088b6a] 15: akonadiserver(_ZN7Akonadi13AkonadiServer8instanceEv+0x48) [0x808a1d8] 16: akonadiserver(main+0x364) [0x8080fb4] 17: /lib/libc.so.6(__libc_start_main+0xe7) [0xb6fabce7] 18: akonadiserver() [0x8080b81] ] " ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error) "akonadiserver" crashed too often and will not be restarted! I tried moving the ~/.local/share/akonadi folder and running it fresh, and I also tried starting Akonadi from a brand new user, all to no avail. Requested by @djeikyb: patches@pleistocene:~$ ls -ld ~/.local drwxrwx--- 3 patches patches 4096 2011-02-07 03:15 /home/patches/.local patches@pleistocene:~$ mysql_upgrade Looking for 'mysql' as: mysql Looking for 'mysqlcheck' as: mysqlcheck Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) when trying to connect FATAL ERROR: Upgrade failed patches@pleistocene:~$ mysql_upgrade -S ~/.local/share/akonadi/socket-pleistocene/ Looking for 'mysql' as: mysql Looking for 'mysqlcheck' as: mysqlcheck Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' '--socket=/home/patches/.local/share/akonadi/socket-pleistocene/' mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/home/patches/.local/share/akonadi/socket-pleistocene/' (111) when trying to connect FATAL ERROR: Upgrade failed

  Read the article

• Oracle Expands Sun Blade Portfolio for Cloud and Highly Virtualized Environments

  - by Ferhat Hatay

  Oracle announced the expansion of Sun Blade Portfolio for cloud and highly virtualized environments that deliver powerful performance and simplified management as tightly integrated systems.  Along with the SPARC T3-1B blade server, Oracle VM blade cluster reference configuration and Oracle's optimized solution for Oracle WebLogic Suite, Oracle introduced the dual-node Sun Blade X6275 M2 server module with some impressive benchmark results.   Benchmarks on the Sun Blade X6275 M2 server module demonstrate the outstanding performance characteristics critical for running varied commercial applications used in cloud and highly virtualized environments.  These include best-in-class SPEC CPU2006 results with the Intel Xeon processor 5600 series, six Fluent world records and 1.8 times the price-performance of the IBM Power 755 running NAMD, a prominent bio-informatics workload.   Benchmarks for Sun Blade X6275 M2 server module  SPEC CPU2006  The Sun Blade X6275 M2 server module demonstrated best in class SPECint_rate2006 results for all published results using the Intel Xeon processor 5600 series, with a result of 679.  This result is 97% better than the HP BL460c G7 blade, 80% better than the IBM HS22V blade, and 79% better than the Dell M710 blade.  This result demonstrates the density advantage of the new Oracle's server module for space-constrained data centers.     Sun Blade X6275M2 (2 Nodes, Intel Xeon X5670 2.93GHz) - 679 SPECint_rate2006; HP ProLiant BL460c G7 (2.93 GHz, Intel Xeon X5670) - 347 SPECint_rate2006; IBM BladeCenter HS22V (Intel Xeon X5680)  - 377 SPECint_rate2006; Dell PowerEdge M710 (Intel Xeon X5680, 3.33 GHz) - 380 SPECint_rate2006.  SPEC, SPECint, SPECfp reg tm of Standard Performance Evaluation Corporation. Results from www.spec.org as of 11/24/2010 and this report.    For more specifics about these results, please go to see http://blogs.sun.com/BestPerf   Fluent The Sun Fire X6275 M2 server module produced world-record results on each of the six standard cases in the current "FLUENT 12" benchmark test suite at 8-, 12-, 24-, 32-, 64- and 96-core configurations. These results beat the most recent QLogic score with IBM DX 360 M series platforms and QLogic "Truescale" interconnects.  Results on sedan_4m test case on the Sun Blade X6275 M2 server module are 23% better than the HP C7000 system, and 20% better than the IBM DX 360 M2; Dell has not posted a result for this test case.  Results can be found at the FLUENT website.   ANSYS's FLUENT software solves fluid flow problems, and is based on a numerical technique called computational fluid dynamics (CFD), which is used in the automotive, aerospace, and consumer products industries. The FLUENT 12 benchmark test suite consists of seven models that are well suited for multi-node clustered environments and representative of modern engineering CFD clusters. Vendors benchmark their systems with the principal objective of providing comparative performance information for FLUENT software that, among other things, depends on compilers, optimization, interconnect, and the performance characteristics of the hardware.   FLUENT application performance is representative of other commercial applications that require memory and CPU resources to be available in a scalable cluster-ready format.  FLUENT benchmark has six conventional test cases (eddy_417k, turbo_500k, aircraft_2m, sedan_4m, truck_14m, truck_poly_14m) at various core counts.   All information on the FLUENT website (http://www.fluent.com) is Copyrighted1995-2010 by ANSYS Inc. Results as of November 24, 2010. For more specifics about these results, please go to see http://blogs.sun.com/BestPerf   NAMD Results on the Sun Blade X6275 M2 server module running NAMD (a parallel molecular dynamics code designed for high-performance simulation of large biomolecular systems) show up to a 1.8X better price/performance than IBM's Power 7-based system.  For space-constrained environments, the ultra-dense Sun Blade X6275 M2 server module provides a 1.7X better price/performance per rack unit than IBM's system.     IBM Power 755 4-way Cluster (16U). Total price for cluster: $324,212. See IBM United States Hardware Announcement 110-008, dated February 9, 2010, pp. 4, 21 and 39-46.  Sun Blade X6275 M2 8-Blade Cluster (10U). Total price for cluster:  $193,939. Price/performance and performance/RU comparisons based on f1ATPase molecule test results. Sun Blade X6275 M2 cluster: $3,568/step/sec, 5.435 step/sec/RU. IBM Power 755 cluster: $6,355/step/sec, 3.189 step/sec/U. See http://www-03.ibm.com/systems/power/hardware/reports/system_perf.html. See http://www.ks.uiuc.edu/Research/namd/performance.html for more information, results as of 11/24/10.   For more specifics about these results, please go to see http://blogs.sun.com/BestPerf   Reverse Time Migration The Reverse Time Migration is heavily used in geophysical imaging and modeling for Oil & Gas Exploration.  The Sun Blade X6275 M2 server module showed up to a 40% performance improvement over the previous generation server module with super-linear scalability to 16 nodes for the 9-Point Stencil used in this Reverse Time Migration computational kernel.  The balanced combination of Oracle's Sun Storage 7410 system with the Sun Blade X6275 M2 server module cluster showed linear scalability for the total application throughput, including the I/O and MPI communication, to produce a final 3-D seismic depth imaged cube for interpretation. The final image write time from the Sun Blade X6275 M2 server module nodes to Oracle's Sun Storage 7410 system achieved 10GbE line speed of 1.25 GBytes/second or better performance. Between subsequent runs, the effects of I/O buffer caching on the Sun Blade X6275 M2 server module nodes and write optimized caching on the Sun Storage 7410 system gave up to 1.8 GBytes/second effective write performance. The performance results and characterization of this Reverse Time Migration benchmark could serve as a useful measure for many other I/O intensive commercial applications. 3D VTI Reverse Time Migration Seismic Depth Imaging, see http://blogs.sun.com/BestPerf/entry/3d_vti_reverse_time_migration for more information, results as of 11/14/2010.                            

  Read the article

• ubuntu wont boot,, frozen at boot manager

  - by user93417

  im running ubuntu desktop 12.04, and well, i have no idea what happened. my computer lost power and died, and when i plugged it in and powered back on it took me to the sign in page and froze. i turned the computer off again and powered back on, this time hitting f2 and going to boot options, and the boot options page is frozen. ive powered up and down and tried a few times, all i get is a frozen boot options screen any ideas?

  Read the article

• A list of game mechanics

  - by Iain

  I'm trying to compile a list of game mechanics, by which I mean high-level/meta game mechanics like Cooperation, Resource Management, Chance and Time Manipulation rather than low level mechanics like running, jumping climbing ladders, etc Does any one have any suggestions or can point me to good existing lists? My WIP list is already proving to be quite useful to me in the way I think about games.

  Read the article

• SOLVED Install MythTV & 11.10 on Lenovo S12 (Intel atom) with wireless

  - by keepitsimpleengineer

  This is how I installed Ubuntu 11.10 and MythTV client on my Lenovo S12 (Intel Atom) laptop and use it using WiFi (see additional notes at end). I did this because the upgrade from 11.04 bricked the laptop. Note that the partitions on the Lenovo standard disk were already in place for this installation. Also note that my LAN is setup for fixed IP addresses. Downloaded and burned 11.10 x86 Desktop Ubuntu CD Connected the power supply cord, LAN wire and the external DVD USB drive. Ran Windows XP and made sure performance level "Performance" was set and "Wireless" was enabled. Booted S12 from CD Disabled Networking from icon on upper left panel icon Edited Connections… "Wired connection 1" ? Set IP address, accepted default netmask and set gateway. Also set DNS server. Good idea to check "Connection Information" here to verify everything's O.K. Selected Install Ubuntu from the initial "Install" window Verified the three items were checked (required disk space available, plugged into a power source, & connected to the Internet) Selected Download updates while installing and third party software. Hit Continue… At wireless selected don't want to connect…WiFi…now. Continue… At Installation type, selected Something else. Continue… At partition tale, selected the ext4 Linux partition, set the mount point as "/", and marked for formatting. Here I selected the main disk (/sda) for installing the boot manager. Continue… Selected or verified my Time zone. Continue… Selected my keyboard layout. Continue… Filled in the who are you fields. Make sure password is required to sign in is checked. Continue… Chose a picture. Continue… I selected import no accounts. Continue… Wait as the Install creeps along. If your screen goes blank, tap the space bar ? apparently the screen saver/power plan does this. There are several progress bars. The longest was "Installing system", and it was the next to the last one. Installation Complete window appears, Restart Now… Wait as it stops, The screen blanks then the message "…remove…media…close tray…press enter" I just unplugged the USB DVD and hit enter… It was disheartening but the screen turned Ubuntu Purple-beige and nothing happened, so I help down the power key until it shut down, the pressed it again and the Grub Boot screen appeared. Select Ubuntu… 25.The screen went blank with the little flashing underscore cursor on it and the disk light would occasionally flash. I hit the enter key and eventuality Ubuntu started. After a somewhat long time the unity desktop appeared. 11.10, unlike earlier versions, retains the connection information. Check this by checking the network icon on the upper left applet panel. Here the touch-pad·mouse quit working and I had to reboot. It takes and extremely long time to boot, sometimes requiring several power off/ power on (cold boot). You can try to get the default network manager to work, but it might not, it didn't on mine for WiFi. Thanks to: Chris at URL here's what to do… disconnect your wired Internet connection. input your wireless information into network manager open a terminal (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "terminal". Might be a good idea to drag and drop the terminal icon to the terminal, it's easy to get rid of later. click to open a terminal, and type in: sudo rmmod acer_wmi && echo "blacklist acer_wmi" >> /etc/modprobe.d/blacklist.conf and hit enter. type in your password as asked. if you have correctly entered your WiFi information and you are near your AP, you should connect immediately if not, see the URL above ? you might need to replace "network manager" with "wicd" ? I did with 11.04. Update the new 11.10, in the upper left panel applet weird·gear icon is menu with a line about updating. It's the new way to invoke Update Manager. Your lenovo S12 (intel atom) should now run the new unity Ubuntu. Point your elbow at the ceiling and pat yourself on the back. Installing Mythbuntu Client 24.1 Open mythbuntu.org/repos (I urge you not to directly use Ubuntu Software Center for this) Install Mythbuntu Repos Save the file (in ~/Downloads, the default) Run the file ? it will update your repositories so that you will get the proper installation sources ? it will start Ubuntu Software Center to do this ? Click Install… You will need your password. Debconf window will open, select by making sure check mark is in the little box "Would you like to activate…". Forward… Which version? At the time of writing the current "Stable" version was 24.1, select 0.24.x… Forward… Read the message, then forward… Delete the downloaded file. Install synaptic (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "synaptic". Click on the synaptic icon. Ubuntu Software Center will open and allow you to install synaptic package manager. Open Synaptic (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "Synaptic". Might be a good idea to drag and drop the terminal icon to the terminal, it's easy to get rid of later. Run synaptic, read the intro, and close the intro window. Type in mythbuntu-control-centre in the Quick filter text box, and then select it "Mark for installation" by clicking on the box next to it's name. Marvel at the additional to be installed items, then select "?Mark"… At the top of the synaptic window click on the "? Apply" button. Marvel at the amount of stuff to be installed, the click on "Apply". When finished, close finished window and synaptic. Open mythbuntu-control-centre (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythbuntu". Might be a good idea to drag and drop the mythbuntu-control-centre icon to the terminal, it's easy to get rid of later. You can now configure and install the frontend. Go down the icon totem on the right side of the window and click as needed… System roles. ? No Backend, Desktop Frontend, and Ubuntu Desktop. Apply… & Apply changes… & Password… MySQL Configuration ? from backend ? Setup General Alt-N(ext) Alt-N(ext) Stetting Access Setup PIN code: ~~~~ Input Security key and click "Test Connection", if ?, then Apply… & Apply… {note: for some inexplicable reason, control centre hung on this, but when I restarted it, it was set properly} Graphics drivers, When I did this, only the Broadcom wireless driver showed up. I closed without doing anything. Services. I enabled SSH & Samba. Apply… & Apply… Repositories. Asked & Answered. MythExport. Pass, I believe it requires backend on the same system. Proprietary Codec Support. Check to enable, Apply… & Apply… System Updates. No action necessary, will be a part of the Ubuntu update mechanism. Themes and Artwork. For themes, I selected Enable/Update all. Apply… & Apply… Infrared & Startup behavior and Plugins. Defer until you know more. Close software centre. Open mythTV (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythTV". Might be a good idea to drag and drop the mythTV icon to the terminal, it's easy to get rid of later. Incorrect Group Membership. Fix this by clicking "Yes"… Log out/end. Do this by clicking "Yes"… For my Lenovo S12, I had to manually restart Ubuntu - and still with the very long restart…/no start/cold boot/reboot/pressing the shift key required Open mythTV (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythTV". Might be a good idea to drag and drop the mythTV icon to the terminal, it's easy to get rid of later. Will open with Select country & language. Do so. then get message with "No", hit "Ok" and arrive at the data base Configuration 1/2 screen. You will need your brackend password, from backend ? Setup General Database Configuration 1/2 Password:~? Enter this Hit Alt-n to go to the next page. Select "Use custom id…", then enter a custom ID, I use the machine's name. Hit finish, and MythTV should start up with all default settings. For the lenovo S12, the first thing you want to do is to set Playback profiles to "Normal". From Setup TV Settings Playback Alt-N(ext) Alt-N(ext) Playback Profiles (3/8) : Change Current Video Playback Profile to "Normal". You can fiddle with this setting later. For the lenovo S12, the second thing is to get the sound going. From Setup General Alt-N(ext) Alt-N(ext) Alt-N(ext) Audio System: The top of the screen is a button title "Scan for audio devices", move the highlight there and press the Space bar. Then Tab down to Audio Output Device: and left-right arrow until "ALSA:hw:Card=Intel,DEV=0" is selected. Then Alt-N(ext) until "Finish". Now you should have sound. You should now have MythTV working nicely on the Lenovo S12 Notes about wireless: Running Lenovo S12 on wireless is demanding on both power and WiFi connection. Best results will be obtained when running on power and wired connection. I run my S12 on wireless, actually two serial connections with two access points, something that is not easy to achieve. Here Mythbuntu client-server (in den) <? wireless link 1 <?office LAN? wireless link 2 <? Lenovo S12 Ubuntu 11.10 The office LAN is fixed IP behind an Untangle firewall router. There is another MythTV client on Ubuntu 10.10 computer in the office (which has always worked well). ProblemMythbuntu\Win7 client hangs with frozen frames, short segment of audio repeating. Hardware Rosewill RNX-G300EX IEEE 802.11b/g PCI Wireless Card on client-server 2 Linksys WRT54GL wireless broadband routers on LAN for link1 and link 2 WRT54GL FirmwareDD-WRT v24-sp2(07/22/09) voip set up to act as an access point. Note? many people advised this was an unworkable scheme, and in probably most cases it will be. Solution? Set up DD-WRT with the following Wireless settings… Basic Channel: Different fixed channels at least 4 difference, I use 6 & 11 Basic Sensitivity Range (ACK timing): 50 MAC filter use filter: Enable, Selected Permit only clients listed to access… Requires adding MAC addresses in "Edit MAC Filter List" This causes the 54GL's to ignore any but the listed MAC address, down side, no "guest" capability. Advanced Basic rate: All Advanced CTS Protection Mode: Off Advanced Frame Burst: Enable Advanced Max associate clients: 4 for client link 2, 1 for client-server link 1 Advanced AP isolation: Enable Advanced Preamble: Short Advanced Afterburner: On Advanced Wireless GUI access: Off Advanced WMM support: Off Other settings: default for supplied firmware. Why I suspect this worked? The 54GL Access Points's with the firmware's setting are set to handle a multiple client, wide area situation. With these mods I reconfigured them for a small area, few client situation, disabling Advanced WMM probably the most important. In addition, the client mythtv when used all other users of its access point are turned off except for a Skype phone. Also, the client-server is set up to allow other connections though it's LAN connection, and these are used to connect the TV and disc players, not used when client is being used.

  Read the article

• how to set environment variable in eric IDE

  - by ng0323

  I have no problem running a python script from the terminal, but in eric IDE, I am getting this error: ImportError libcudart.so.6.0: cannot open shared object file: No such file or directory Perhaps it's an enviroment variable that needs to be set. In eric, when I run script, I filled in the environment option as follows. I tried set PATH = usr/local/cuda-6.0/bin or PATH = /usr/local/cuda-6.0/bin or just /usr/local/cuda-6.0/bin and they all didn't work.

  Read the article

• Screwed Up Again, Did Ya?

  - by rickramsey

  Your turn to wear the Cantaloupe Cap of Shame? Here's how to keep it from happening again: Figure out what data you need to archive Create a solid archive someplace safer than your iphone Get wicked fast at recovering your system. Jesse Butler explains how to do all three for a system running Oracle Solaris 11: How to Recover an Oracle Solaris 11 System Website Newsletter Facebook Twitter

  Read the article

• VS for Database Pros (GDR R2) Removes Sproc Comments (2 replies)

  I have been working with my team to implement Data Dude GDR R2 for managing ALL of the databases for our applications. So far I am very pleased by what we can do with the tool with a single exception. I want to have a header with comments as part of every stored procedure so we can track the history of a procedure. When creating a deployment script, and subsequently running it, Data Dude strips ou...

  Read the article

• First-Global-Teach for the Oracle Imaging and Process Management 11g: Administration: San Francisco

  - by stephen.schleifer

  First-Global-Teach for the Oracle Imaging and Process Management 11g: Administration: San Francisco | June 23-25 This course enables participants to use Oracle Imaging and Process Management (I/PM) 11g to access, track, and annotate documents. In addition, they also get an overview of the product architecture of Oracle I/PM running on Oracle WebLogic Server.The course also delves into administration tasks such as security permissions, configuration such as creating BPEL connections, and procedures for creating applications, searches, and input mappings. Customer and partners can register by looking up the course (#D61575GC10) on http://education.oracle.com

  Read the article

• Set Custom Reload Times for Individual Webpages in Chrome

  - by Asian Angel

  Do you have a webpage that needs to be reloaded every so often or perhaps you have multiple webpages that each need their own individual reload time? Now you can have the best of both with the AutoReloader extension for Google Chrome. Using AutoReloader When you first look at the drop-down window everything will be in a neutral “waiting” state. You can start using the extension immediately by simply entering the desired “time frame” for reloading a webpage. Notice for the “Repeat Option” that “0 = Continuous”… You may want to have a quick look through the “Options” to see if there are any “operational changes” that you would like to make. Once you enter a time click on the “Set Link” to start the timer. Notice that you can view the time remaining on the “Toolbar Button” unless you disabled the feature in the “Options”. Clicking on the “Toolbar Button” will show a larger version of the timer in the drop-down window along with a “Cancel Current Timer Link”. Here is the best part of all with AutoReloader…you can set up your own customized list of “Reload Times” and then access them through the drop-down window. Using the two times shown here we were able to set the “Productive Geek Webpage” up for 30 second reloads and the “TinyHacker Webpage” up for 1 minute reloads at the same time. There was no conflict whatsoever in running both “reload times” simultaneously. This is a really terrific feature! Conclusion Whether you have only one webpage or multiple pages that need periodic reloading (such as tracking a Woot-Off or an Ebay auction) the AutoReloader extension is the perfect tool for the job. Running custom reload times simultaneously have never been easier. Links Download the AutoReloader extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Set Up Automatic Timed Page Reloading on Your Webpages in FirefoxRemove Custom about:config Entries the Easy WayEnable Vista Black Style Theme for Google Chrome in XPActivate the Redesigned New-Tab Interface in Google ChromeModify Tab Ordering in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier

  Read the article

• Auto-select external soundcard?

  - by dandelion

  Just got an external usb sound card because my internal speakers broke. The new sound card works just fine after plugging it in and going to System Settings Sound, and then selecting the device. However, I was curious as to whether there was a way to make ubuntu auto-select the device without having to go through System Settings. Can it just be selected upon plugging it in? Any and all help appreciated :)) (ps its running 12.04)

  Read the article

• Tailoring the Oracle Fusion Applications User Interface with Oracle Composer

  - by mvaughan

  By Killian Evers, Oracle Applications User Experience Changing the user interface (UI) is one of the most common modifications customers perform to Oracle Fusion Applications. Typically, customers add or remove a field based on their needs. Oracle makes the process of tailoring easier for customers, and reduces the burden for their IT staff, which you can read about on the Usable Apps website or in an earlier VoX post.This is the first in a series of posts that will talk about the tools that Oracle has provided for tailoring with its family of composers. These tools are designed for business systems analysts, and they allow employees other than IT staff to make changes in an upgrade-safe and patch-friendly manner. Let’s take a deep dive into one of these composers, the Oracle Composer. Oracle Composer allows business users to modify existing UIs after they have been deployed and are in use. It is an integral component of our SaaS offering. Using Oracle Composer, users can control:     •    Who sees the changes     •    When the changes are made     •    What changes are made Change for me, change for you, change for all of youOne of the most powerful aspects of Oracle Composer is its flexibility. Oracle uses Oracle Composer to make changes for a user or group of users – those who see the changes. A user of Oracle Fusion Applications can make changes to the user interface at runtime via Oracle Composer, and these changes will remain every time they log into the system. For example, they can rearrange certain objects on a page, add and remove designated content, and save queries.Business systems analysts can make changes to Oracle Fusion Application UIs for groups of users or all users. Oracle’s Fusion Middleware Metadata Services (MDS) stores these changes and retrieves them at runtime, merging customizations with the base metadata and revealing the final experience to the end user. A tailored application can have multiple customization layers, and some layers can be specific to certain Fusion Applications. Some examples of customization layers are: site, organization, country, or role. Customization layers are applied in a specific order of precedence on top of the base application metadata. This image illustrates how customization layers are applied.What time is it?Users make changes to UIs at design time, runtime, and design time at runtime. Design time changes are typically made by application developers using an integrated development environment, or IDE, such as Oracle JDeveloper. Once made, these changes are then deployed to managed servers by application administrators. Oracle Composer covers the other two areas: Runtime changes and design time at runtime changes. When we say users are making changes at runtime, we mean that the changes are made within the running application and take effect immediately in the running application. A prime example of this ability is users who make changes to their running application that only affect the UIs they see. What is new with Oracle Composer is the last area: Design time at runtime.  A business systems analyst can make changes to the UIs at runtime but does not have to make those changes immediately to the application. These changes are stored as metadata, separate from the base application definitions. Customizations made at runtime can be saved in a sandbox so that the changes can be isolated and validated before being published into an environment, without the need to redeploy the application. What can I do?Oracle Composer can be run in one of two modes. Depending on which mode is chosen, you may have different capabilities available for changing the UIs. The first mode is view mode, the most common default mode for most pages. This is the mode that is used for personalizations or user customizations. Users can access this mode via the Personalization link (see below) in the global region on Oracle Fusion Applications pages. In this mode, you can rearrange components on a page with drag-and-drop, collapse or expand components, add approved external content, and change the overall layout of a page. However, all of the changes made this way are exclusive to that particular user.The second mode, edit mode, is typically made available to select users with access privileges to edit page content. We call these folks business systems analysts. This mode is used to make UI changes for groups of users. Users with appropriate privileges can access the edit mode of Oracle Composer via the Administration menu (see below) in the global region on Oracle Fusion Applications pages. In edit mode, users can also add components, delete components, and edit component properties. While in edit mode in Oracle Composer, there are two views that assist the business systems analyst with making UI changes: Design View and Source View (see below). Design View, the default view, is a WYSIWYG rendering of the page and its content. The business systems analyst can perform these actions: Add content – including custom content like a portlet displaying news or stock quotes, or predefined content delivered from Oracle Fusion Applications (including ADF components and task flows) Rearrange content – performed via drag-and-drop on the page or by using the actions menu of a component or portlet to move content around Edit component properties and parameters – for specific components, control the visual properties such as text or display labels, or parameters such as RSS feeds Hide or show components – hidden components can be re-shown Delete components Change page layout – users can select from eight pre-defined layouts Edit page properties – create or edit a page’s parameters and display properties Reset page customizations – remove edits made to the page in the current layer and/or reset the page to a previous state. Detailed information on each of these capabilities and the additional actions not covered in the list above can be found in the Oracle® Fusion Middleware Developer's Guide for Oracle WebCenter.This image shows what the screen looks like in Design View.Source View, the second option in the edit mode of Oracle Composer, provides a WYSIWYG and a hierarchical rendering of page components in a component navigator. In Source View, users can access and modify properties of components that are not otherwise selectable in Design View. For example, many ADF Faces components can be edited only in Source View. Users can also edit components within a task flow. This image shows what the screen looks like in Source View.Detailed information on Source View can be found in the Oracle® Fusion Middleware Developer's Guide for Oracle WebCenter.Oracle Composer enables any application or portal to be customized or personalized after it has been deployed and is in use. It is designed to be extremely easy to use so that both business systems analysts and users can edit Oracle Fusion Applications pages with a few clicks of the mouse. Oracle Composer runs in all modern browsers and provides a rich, dynamic way to edit JSF application and portal pages.From the editor: The next post in this series about composers will be on Data Composer. You can also catch Killian speaking about extensibility at OpenWorld 2012 and in her Faces of Fusion video.

  Read the article

• Set up grub2 on cloned Ubuntu installation

  - by ptikobj

  With an Ubuntu Live Disc, I have copied my Ubuntu 10.04 installation to a new harddisk (with the same hardware). However, it doesn't boot, since I think I still need to set up grub for this new installation. How do I set up grub2 for a copied Ubuntu installation? All the tutorials for grub2 didn't really help me... running update-grub on the "original" Ubuntu installation doesn't find the copied Ubuntu installation.

  Read the article

• EF 4 Pluralization Update

  I previously wrote about playing with EF 4s PluralizationService class . Now that OrcsWeb is running ASP.NET 4, you can play with my little pluralization page and its WCF service online. The source code (such as it is!) can be downloaded from the MSDN...(read more)...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• EF 4 Pluralization Update

  - by Ken Cox [MVP]

  I previously wrote about playing with EF 4’s PluralizationService class . Now that OrcsWeb is running ASP.NET 4, you can play with my little pluralization page and its WCF service online. The source code (such as it is!) can be downloaded from the MSDN Code Gallery here: http://code.msdn.microsoft.com/PluralizationService BTW, one annoyance is that the WDSL still includes the default namespace:  namespace="http://tempuri.org/" I swatted a couple of these instances, but if you know...(read more)

  Read the article

• Part 4, Getting the conversion tables ready for CS to DNN

  - by Chris Hammond

  This is the fourth post in a series of blog posts about converting from CommunityServer to DotNetNuke. A brief background: I had a number of websites running on CommunityServer 2.1, I decided it was finally time to ditch CommunityServer due to the change in their licensing model and pricing that made it not good for the small guy. This series of blog posts is about how to convert your CommunityServer based sites to DotNetNuke . Previous Posts: Part 1: An Introduction Part 2: DotNetNuke Installation...(read more)

  Read the article

• How to recreate spfile on Exadata?

  - by Bandari Huang

  Copy spfile from the ASM diskgroup to local disk by using the ASMCMD command line tool.  ASMCMD> pwd +DATA_DM01/EDWBASE ASMCMD> ls -l Type Redund Striped Time Sys Name Y CONTROLFILE/ Y DATAFILE/ Y ONLINELOG/ Y PARAMETERFILE/ Y TEMPFILE/ N spfileedwbase.ora => +DATA_DM01/EDWBASE/PARAMETERFILE/spfile.355.800017117 ASMCMD> cp +DATA_DM01/EDWBASE/spfileedwbase.ora /home/oracle/spfileedwbase.ora.bak Copy the context from spfileedwbase.ora.bak to initedwbase.ora except garbled character. Using above initedwbase.ora, start one of the RAC instances to the mount phase.   SQL> startup mount pfile=/home/oracle/initedwbase.ora Ensure one of the database instances is mounted before attempting to recreate the spfile.  SQL> select INSTANCE_NAME,HOST_NAME,STATUS from v$instance; INSTANCE_NAME HOST_NAME  STATUS ------------- ---------  ------ edwbase1      dm01db01   MOUNTED Create the new spfile. SQL> create spfile='+DATA_DM01/EDWBASE/spfileedwbase.ora' from pfile='/home/oracle/initedwbase.ora'; ASMCMD will show that a new spfile has been created as the alias spfilerac2.ora is now pointing to a new spfile under the PARAMETER directory in ASM. ASMCMD> pwd +DATA_DM01/EDWBASE ASMCMD> ls -l Type Redund Striped Time Sys Name Y CONTROLFILE/ Y DATAFILE/ Y ONLINELOG/ Y PARAMETERFILE/ Y TEMPFILE/ N spfilerac2.ora => +DATA_DM01/EDWBASE/PARAMETERFILE/spfile.356.800013581  Shutdown the instance and restart the database using srvctl using the newly created spfile. SQL> shutdown immediate ORA-01109: database not open Database dismounted. ORACLE instance shut down. SQL> exit [oracle@dm01db01 ~]$ srvctl start database -d edwbase [oracle@dm01db01 ~]$ srvctl status database -d edwbase Instance edwbase1 is running on node dm01db01 Instance edwbase2 is running on node dm01db02 ASMCMD will now show a number of spfiles exist in the PARAMETERFILE directory for this database. The spfile containing the parameter preventing startups should be removed from ASM. In this case the file spfile.355.800017117 can be removed because spfile.356.800013581 is the current spfile. ASMCMD> pwd +DATA_DM01/EDWBASE ASMCMD> cd PARAMETERFILE ASMCMD> ls -l Type Redund Striped Time Sys Name PARAMETERFILE UNPROT COARSE FEB 19 08:00:00 Y spfile.355.800017117 PARAMETERFILE UNPROT COARSE FEB 19 08:00:00 Y spfile.356.800013581 ASMCMD> rm spfile.355.800017117 ASMCMD> ls spfile.356.800013581 Referenece: Recreating the Spfile for RAC Instances Where the Spfile is Stored in ASM [ID 554120.1]

  Read the article

• Purging SOA Instances

  - by angelo.santagata

  All, If your running Oracle SOA suite in a high thoughput environment you'll probably discover that your dehydration store will get large, and larger if you dont manage it properly. There are many strategies in manging how to purge this, and this document recently released by Oracle details them quite nicely. The document is Oracle SOA Suite 10g based however a 11g version is in the works and should be out soon. Enjoy the read

  Read the article

• VLC will sometimes have issues displaying video in fullscreen. What could cause this? How would I troubleshoot the issue?

  - by George Marian

  Recently VLC has been having issues displaying video in fullscreen mode. AFAIK, nothing has changed with the video card drivers and it's certainly the same version of VLC. (/me shakes a fist at the repository maintainers) This has worked without issue in the past. In fact, I've had as many as 6 instances of VLC running, each playing a video. One was always fullscreen on my second monitor, while the others were tiled on my primary monitor. I was able to toggle any of the other 5 into fullscreen mode and the video displayed without issue. Lately, I've been having trouble running 2 instances in fullscreen mode. (Sometimes, even a single instance will not display the video in fullscreen.) VLC will continue to play the video, but in fullscreen mode I see nothing but a black screen. Sometimes, the video will display if I maximize the VLC window. Other times, I have to settle for a smaller sized window. I don't know if this is pertinent, but sometimes changing the min/max state of a Firefox window (Minefield, specifically) seemed to allow the troublesome instance to display the video in fullscreen mode. However, that did not prove to be a consistent workaround. Sometimes, it seemed that closing a Firefox window did the trick, though that isn't consistently successful either. (I futzed with Firefox, because with the crazy number of windows and tabs that I normally have open, it regularly hogs about 1 GB of RAM.) Another bit of funkiness that comes to mind is the fact that my secondary monitor is considered the primary on boot-up. I use xrandr to designate the real 1st monitor as primary after boot-up, as suggested by someone in a question I asked on the Unix & Linux SE site. Specs: Ubuntu 10.10 w/ Gnome and Compiz 8GB RAM AMD Phenom II 965 Black Edition Asus M4A79 Deluxe mobo XFX ATI Radeon HD 5750 w/ 1GB RAM VLC is configured to use the hardware overlay for video (as per the default setting) Does anyone have an idea what may cause this issue or how I may go about troubleshooting it? Update: Right now I have 2 instances of VLC playing, each in fullscreen mode on a separate monitor. This is what I see:

  Read the article

• SQL Developer Debugging, Watches, Smart Data, & Data

  - by thatjeffsmith

  After presenting the SQL Developer PL/SQL debugger for about an hour yesterday at KScope12 in San Antonio, my boss came up and asked, “Now, would you really want to know what the Smart Data panel does?” Apparently I had ‘made up’ my own story about what that panel’s intent is based on my experience with it. Not good Jeff, not good. It was a very small point of my presentation, but I probably should have read the docs. The Smart Data tab displays information about variables, using your Debugger: Smart Data preferences. You can also specify these preferences by right-clicking in the Smart Data window and selecting Preferences. Debugger Smart Data Preferences, control number of variables to display The Smart Data panel auto-inspects the last X accessed variables. So if you have a program with 26 variables, instead of showing you all 26, it will just show you the last two variables that were referenced in your program. If you were to click on the ‘Data’ debug panel, you’ll see EVERYTHING. And if you only want to see a very specific set of values, then you should use Watches. The Smart Data Panel As I step through the code, the variables being tracked change as they are referenced. Only the most recent ones display. This is controlled by the ‘Maximum Locations to Remember’ preference. Step through the code, see the latest variables accessed The Data Panel All variables are displayed. Might be information overload on large PL/SQL programs where you have many dozens or even hundreds of variables to track. Shows everything all the time Watches Watches are added manually and only show what you ask for. Data on Demand – add a watch to track a specific variable Remember, you can interact with your data If you want to do more than just watch, you can mouse-right on a data element, and change the value of the variable as the program is running. This is one of the primary benefits to debugging over using DBMS_OUTPUT to track what’s happening in your program. Change the values while the program is running to test your ‘What if?’ scenarios

  Read the article

< Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >