Search Results

Search found 10445 results on 418 pages for 'basic'.

Page 48/418 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

  • Simplemodal: four times on a page leads to extra "next" or "previous" button

    - by DDF
    We are experiencing a problem with each instance of the call to the simplemodal div class .basic-modal-content adding an extra next or previous button in the modal windows. We are using simplemodal in four places on a page using a common JS in the container (provided below) and a common CSS format for the modal windows. In one area we are using six "statements" in a window with a next and previous button. I would include a picture of the modal window but it's being disallowed by the system as I'm a first time poster to this forum. In the other three areas we are using three "biographies" in a similar window with the ability to see each of the three bios from each of modal windows. We are using a common Simplemodal JS script in the page which has the following code: <script> $(function() { $('a').each(function() { $(this).click(function() { $('#modal_' + this.id).modal({ overlayClose:true }); }); }); var num_divs = $('div.basic-modal-content').length; $('div.basic-modal-content').each(function(i) { /* if there is a previous div add a link to it */ if (i > 0) { /* get the ID for previous div */ var prev_id = $(this).prev('.basic-modal-content').attr('id'); /* add the link with click event */ $('<a href="#" class="simplemodal-container-prev"></a>') .click(function() { $.modal.close(); $('#' + prev_id).modal({overlayClose:true}); }) .appendTo($(this)); } /* if there is a next div add a link to it */ if (i < num_divs - 1) { /* get the ID for next div */ var next_id = $(this).next('.basic-modal-content').attr('id'); /* add the link with click event */ $('<a href="#" class="simplemodal-container-next"></a>') .click(function() { $.modal.close(); $('#' + next_id).modal({overlayClose:true}); }) .appendTo($(this)); } }); }); </script> and some CSS to create an image for each window that shows the progress bar through the ul/li list. The code to produce the above looks like this: <h1>Our HEADLINE</h1> <div id='basic-modal'> <ul> <li><a href='#' id='one'>TEXT 1</a></li> <li><a href='#' id='two'>TEXT 2</a></li> <li><a href='#' id='three'>TEXT 3</a></li> <li><a href='#' id='four'>TEXT 4</a></li> <li><a href='#' id='five'>TEXT 5</a></li> <li><a href='#' id='six'>TEXT 6</a></li> </ul> </div> <div class="basic-modal-content" id="modal_one"> <img src="link to modal_one.png" alt="progress bar"/> <h3>headline text</h3> <p>body text</p> </div> <div class="basic-modal-content" id="modal_two"> <img src="link to modal_two.png" alt="progress bar"/> <h3>headline text</h3> <p>body text</p> </div> <div> ... other divs 3 4 and 5 </div> <div class="basic-modal-content" id="modal_six"> <img src="link to modal_six.png" alt="progress bar"/> <h3>headline text</h3> <p>body text</p> </div> </div> The ul/li structure works on the main page for the links. The modal windows allow one to browse through all of the six TEXTs. There is a common CSS style to the windows and a custom image in each of the modal windows derived from the "#modal_[number] img" CSS in the form of a progress bar. It should be noted that the first modal window in the first set of ul/li (the six) do not exhibit the extra previous button. Here is the relevant code from one of the three biographic links. You will note that the biographic links each have to have all three in this current configuration. <h4>Our HEADLINE</h4> <div class="bottom-widget-text"> <img src="picture" alt="not relevant to the simplemodal problem"/> <p>Read about person NUMBER 1 by clicking on the following link: <a href='#' id='seven' >Expand</a> </p> </div> <div class="basic-modal-content" id="modal_seven"> <img src="link to modal_seven.png" alt="portrait 1"/> <h3>headline text</h3> <p>BIOGRAPHY</p> </div> <div class="basic-modal-content" id="modal_eight"> <img src="link to modal_eight.png" alt="portrait 2"/> <h3>headline text</h3> <p>BIOGRAPHY</p> </div> <div class="basic-modal-content" id="modal_nine"> <img src="link to modal_nine.png" alt="portrait 3"/> <h3>headline text</h3> <p>BIOGRAPHY</p> </div> </div> Similarly the "biographies" open up from a different area of the page. The modal windows allow one to browse through all three of the BIOs. The bios use the SAME CSS style windows and a custom image in each of the modal windows derived from the "#modal_[number] img" CSS in the form of a portrait. Everything is working well except one thing: the first six windows have an extra next button that leads to an image of the close widow button only. Similarly, the BIOs pages have extra previous button that leads to the same "close button only" shown above. We want to maintain the same base CSS for the modal windows for this page. We want to keep the JS simple. The only behavior that is bad is the extra previous and next bottons that appear to be spurious. So is this a fix to the JS? Or do I have the instances of the modal windows too entangled? Perhaps there is a better method for having multiple instances of a simplemodal window on the same page? Or is the problem the "#" variable being common to each of the uses of the JS? Thanks in advance. DDF

    Read the article

  • one to many jpa relationship

    - by user309944
    Hai I have created two table first table as student package com.crimson.rship; import javax.persistence.Basic; import javax.persistence.Entity; import javax.persistence.FetchType; import javax.persistence.Id; import javax.persistence.OneToMany; @Entity(name="student") public class student { @Id private String stumailid; @Basic private String fathername; @Basic private String mothername; @Basic private String doa; @Basic private String dob; public student(String stumailid,String fathername,String mothername,String doa,String dob) { // TODO Auto-generated constructor stub this.stumailid=stumailid; this.fathername=fathername; this.mothername=mothername; this.doa=doa; this.dob=dob; } public void setStumailid(String stumailid) { this.stumailid = stumailid; } public String getStumailid() { return stumailid; } public void setFathername(String fathername) { this.fathername = fathername; } public String getFathername() { return fathername; } public void setMothername(String mothername) { this.mothername = mothername; } public String getMothername() { return mothername; } public void setDoa(String doa) { this.doa = doa; } public String getDoa() { return doa; } public void setDob(String dob) { this.dob = dob; } public String getDob() { return dob; } } Second table as mark package com.crimson.rship; import java.util.Collection; import javax.persistence.Basic; import javax.persistence.Entity; import javax.persistence.FetchType; import javax.persistence.Id; import javax.persistence.JoinColumn; import javax.persistence.JoinTable; import javax.persistence.OneToMany; @Entity(name="mark") public class mark { @Id private String stumailid; @Basic private String fathername; @Basic private String mothername; @OneToMany(mappedBy="mark",targetEntity=student.class,fetch=FetchType.EAGER) private Collection orders; public mark(String stumailid,String fathername,String mothername) { // TODO Auto-generated constructor stub this.stumailid=stumailid; this.fathername=fathername; this.mothername=mothername; } public void setStumailid(String stumailid) { this.stumailid = stumailid; } public String getStumailid() { return stumailid; } public void setFathername(String fathername) { this.fathername = fathername; } public String getFathername() { return fathername; } public void setMothername(String mothername) { this.mothername = mothername; } public String getMothername() { return mothername; } public void setOrders(Collection orders) { this.orders = orders; } public Collection getOrders() { return orders; } } But this above coding working is not working correctly.can any one help me Thanks in advance

    Read the article

  • Windows 8, NVIDIA graphics recognition fails

    - by Roy Grubb
    I just installed Windows 8 Pro OEM 64-bit (clean install) and it won't properly recognize my graphics adapter. When I installed Win8, it automatically installed the BasicDisplay.sys driver dated 6/21/2006. 6.2.9200.16384 (win8_rtm.120725-1247). Hardware - Mobo:MSi G41M-P33 Combo CPU:Intel CoreDuo 6600 Graphics:NVIDIA GeForce 9400GT *OS* - Windows 8 Pro 64-bit OEM The graphics adapter worked fine in Windows XP. The PC is a generic box, bought locally and its mobo failed recently, so I replaced it with the G41M. Microsoft wouldn't let me re-activate Windows XP with a different mobo, so I installed Win8, which appears to work except as described next. Win8 only partially recognizes the graphics adapter and won't allow NVIDIA latest driver installer to see that it's an NVIDIA card. As a result, OpenGL doesn't work, and this is needed by the software I most use. Other than that the graphics look OK. When I say 'partially recognizes', I mean that via the Control Panel, I can see that the adapter is described as NVIDIA, but the driver remains stuck at Microsoft Basic Display Adapter no matter what I try, including "Update driver..." in adapter properties. Display Screen Resolution Advanced Settings Adapter shows: Adapter Type: Microsoft Basic Display Adapter Chip Type: NVIDIA DAC Type: NVIDIA Corporation Bios Information: G27 Board - p381n17 Don't know what this means ... no mention of 9400GT Total Available Graphics Memory: 256 MB Dedicated Video Memory: 0 MB In fact the adapter has 512MB on-board video memory. System Video Memory: 0 MB Shared System Memory: 256 MB And Control Panel Device Manager Display adapters just shows Microsoft Basic Display Adapter. No other graphics adapter, and no unknown device or yellow question mark. What I have tried so far: 1. Cleared CMOS and reset. Updated BIOS and all mobo drivers as follows: 1st I used Driver Reviver to see if any driver updates were required. It found some but I didn't use that to get the drivers. Then I switched to MSi's own mobo driver utility Live Update 5. This also showed the board needed to update several so I used it to fetch the new drivers. After that it showed that everything was up to date and I checked with Driver Reviver again, which also reported no drivers now needed updating. Rebooted. Went to the NVIDIA site to get the latest graphics adapter driver. Their auto-detect "Option 2: Automatically find drivers for my NVIDIA products" said "The NVIDIA Smart Scan was unable to evaluate your system hardware. Please use Option 1 to manually find drivers for your NVIDIA products." So I downloaded 310.70-desktop-win8-win7-winvista-64bit-international-whql.exe, which lists 9400 GT under supported products, but when I run it, it says: "NVIDIA Installer cannot continue This graphics driver could not find compatible graphics hardware." Connected the display to the on-board Intel graphics (G41 Intel Express), removed the NVIDIA card and rebooted, changed to internal graphics in CMOS. Again it installs the MS Basic Display Adapter, and can't properly run my s/w that needs OpenGL. It runs on other machines with Intel Express graphics (WinXP and 7) Shut down and pulled out the power cord. Held start button to discharge all capacitors. Removed and re-inserted NVIDIA adapter in PCI-E slot and made sure properly seated. Connected the monitor to the card, screwed plug to socket. Reconnected power cord. Started and checked in BIOS that Primary Graphics Adapter was set to PCI-E. Started Windows. Uninstalled MS Basic Display Adapter in Device Manager. Screen blanks briefly, reappears. No Graphics adapter entry was then visible in Device Manager. Restarted PC. MS Basic Display Adapter Visible again in Device Manager. Clicked in Device Manager View Show hidden devices. No other graphics adapter appears, no unknown devices. Rebooted. Tried Scan for Hardware changes. None detected. Tried right-click on MS Basic Display Adapter Properties Driver Update Driver... Search automatically. It replied that it had determined driver was up to date. I checked that there were no graphic driver-related entries in Programs and Features that I could delete (none). Searched for any other drivers with nvidia in their name and deleted them, just keeping the 306.97 installer exe file. Did a Windows Update. Ran GPU-Z which shows (main items): Microsoft Basic Display Adapter GPU G72 BIOS 5.72.22.76.88 Device ID 10DE - 01D5 DDR2 Bus Width 32 Bit Memory size 64MB Driver Version nvlddmkm 6.2.9200.16384 (ForceWare 0.00) / Win8 64 NVIDIA SLI Unknown in the drop-down at the foot, "Microsoft Basic Display Adapter" is the only option If I swap hard disks in that machine to one with a Ubuntu 10.4 installation (originally installed on the same PC), lspci shows "VGA compatible controller as NVIDIA Corporation Device 01d5 (rev a1) (prog-if 00 [VGA controller])" and "kernel driver in use: nvidia" I'm out of ideas for new things to try and would be really grateful of suggestions. Thanks!

    Read the article

  • Authenticating clients in the new WCF Http stack

    - by cibrax
    About this time last year, I wrote a couple of posts about how to use the “Interceptors” from the REST starker kit for implementing several authentication mechanisms like “SAML”, “Basic Authentication” or “OAuth” in the WCF Web programming model. The things have changed a lot since then, and Glenn finally put on our hands a new version of the Web programming model that deserves some attention and I believe will help us a lot to build more Http oriented services in the .NET stack. What you can get today from wcf.codeplex.com is a preview with some cool features like Http Processors (which I already discussed here), a new and improved version of the HttpClient library, Dependency injection and better TDD support among others. However, the framework still does not support an standard way of doing client authentication on the services (This is something planned for the upcoming releases I believe). For that reason, moving the existing authentication interceptors to this new programming model was one of the things I did in the last few days. In order to make authentication simple and easy to extend,  I first came up with a model based on what I called “Authentication Interceptors”. An authentication interceptor maps to an existing Http authentication mechanism and implements the following interface, public interface IAuthenticationInterceptor{ string Scheme { get; } bool DoAuthentication(HttpRequestMessage request, HttpResponseMessage response, out IPrincipal principal);} An authentication interceptors basically needs to returns the http authentication schema that implements in the property “Scheme”, and implements the authentication mechanism in the method “DoAuthentication”. As you can see, this last method “DoAuthentication” only relies on the HttpRequestMessage and HttpResponseMessage classes, making the testing of this interceptor very simple (There is no need to do some black magic with the WCF context or messages). After this, I implemented a couple of interceptors for supporting basic authentication and brokered authentication with SAML (using WIF) in my services. The following code illustrates how the basic authentication interceptors looks like. public class BasicAuthenticationInterceptor : IAuthenticationInterceptor{ Func<UsernameAndPassword, bool> userValidation; string realm;  public BasicAuthenticationInterceptor(Func<UsernameAndPassword, bool> userValidation, string realm) { if (userValidation == null) throw new ArgumentNullException("userValidation");  if (string.IsNullOrEmpty(realm)) throw new ArgumentNullException("realm");  this.userValidation = userValidation; this.realm = realm; }  public string Scheme { get { return "Basic"; } }  public bool DoAuthentication(HttpRequestMessage request, HttpResponseMessage response, out IPrincipal principal) { string[] credentials = ExtractCredentials(request); if (credentials.Length == 0 || !AuthenticateUser(credentials[0], credentials[1])) { response.StatusCode = HttpStatusCode.Unauthorized; response.Content = new StringContent("Access denied"); response.Headers.WwwAuthenticate.Add(new AuthenticationHeaderValue("Basic", "realm=" + this.realm));  principal = null;  return false; } else { principal = new GenericPrincipal(new GenericIdentity(credentials[0]), new string[] {});  return true; } }  private string[] ExtractCredentials(HttpRequestMessage request) { if (request.Headers.Authorization != null && request.Headers.Authorization.Scheme.StartsWith("Basic")) { string encodedUserPass = request.Headers.Authorization.Parameter.Trim();  Encoding encoding = Encoding.GetEncoding("iso-8859-1"); string userPass = encoding.GetString(Convert.FromBase64String(encodedUserPass)); int separator = userPass.IndexOf(':');  string[] credentials = new string[2]; credentials[0] = userPass.Substring(0, separator); credentials[1] = userPass.Substring(separator + 1);  return credentials; }  return new string[] { }; }  private bool AuthenticateUser(string username, string password) { var usernameAndPassword = new UsernameAndPassword { Username = username, Password = password };  if (this.userValidation(usernameAndPassword)) { return true; }  return false; }} This interceptor receives in the constructor a callback in the form of a Func delegate for authenticating the user and the “realm”, which is required as part of the implementation. The rest is a general implementation of the basic authentication mechanism using standard http request and response messages. I also implemented another interceptor for authenticating a SAML token with WIF. public class SamlAuthenticationInterceptor : IAuthenticationInterceptor{ SecurityTokenHandlerCollection handlers = null;  public SamlAuthenticationInterceptor(SecurityTokenHandlerCollection handlers) { if (handlers == null) throw new ArgumentNullException("handlers");  this.handlers = handlers; }  public string Scheme { get { return "saml"; } }  public bool DoAuthentication(HttpRequestMessage request, HttpResponseMessage response, out IPrincipal principal) { SecurityToken token = ExtractCredentials(request);  if (token != null) { ClaimsIdentityCollection claims = handlers.ValidateToken(token);  principal = new ClaimsPrincipal(claims);  return true; } else { response.StatusCode = HttpStatusCode.Unauthorized; response.Content = new StringContent("Access denied");  principal = null;  return false; } }  private SecurityToken ExtractCredentials(HttpRequestMessage request) { if (request.Headers.Authorization != null && request.Headers.Authorization.Scheme == "saml") { XmlTextReader xmlReader = new XmlTextReader(new StringReader(request.Headers.Authorization.Parameter));  var col = SecurityTokenHandlerCollection.CreateDefaultSecurityTokenHandlerCollection(); SecurityToken token = col.ReadToken(xmlReader);  return token; }  return null; }}This implementation receives a “SecurityTokenHandlerCollection” instance as part of the constructor. This class is part of WIF, and basically represents a collection of token managers to know how to handle specific xml authentication tokens (SAML is one of them). I also created a set of extension methods for injecting these interceptors as part of a service route when the service is initialized. var basicAuthentication = new BasicAuthenticationInterceptor((u) => true, "ContactManager");var samlAuthentication = new SamlAuthenticationInterceptor(serviceConfiguration.SecurityTokenHandlers); // use MEF for providing instancesvar catalog = new AssemblyCatalog(typeof(Global).Assembly);var container = new CompositionContainer(catalog);var configuration = new ContactManagerConfiguration(container); RouteTable.Routes.AddServiceRoute<ContactResource>("contact", configuration, basicAuthentication, samlAuthentication);RouteTable.Routes.AddServiceRoute<ContactsResource>("contacts", configuration, basicAuthentication, samlAuthentication); In the code above, I am injecting the basic authentication and saml authentication interceptors in the “contact” and “contacts” resource implementations that come as samples in the code preview. I will use another post to discuss more in detail how the brokered authentication with SAML model works with this new WCF Http bits. The code is available to download in this location.

    Read the article

  • Integrating Twitter Into An ASP.NET Website Using OAuth

    Earlier this year I wrote an article about Twitterizer, an open-source .NET library that can be used to integrate your application with Twitter. Using Twitterizer you can allow your visitors to post tweets, view their timeline, and much more, all without leaving your website. The original article, Integrating Twitter Into An ASP.NET Website, showed how to post tweets and view a timeline to a particular Twitter account using Twitterizer 1.0. To post a tweet to a specific account, Twitterizer 1.0 uses basic authentication. Basic authentication is a very simple authentication scheme. For an application to post a tweet to JohnDoe's Twitter account, it would submit JohnDoe's username and password (along with the tweet text) to Twitter's servers. Basic authentication, while easy to implement, is not an ideal authentication scheme as it requires that the integrating application know the username(s) and password(s) of the accounts that it is connected to. Consequently, a user must share her password in order to connect her Twitter account with the application. Such password sharing is not only insecure, but it can also cause difficulties down the line if the user changes her password or decides that she no longer wants to connect her account to certain applications (but wants to remain connected to others). To remedy these issues, Twitter introduced support for OAuth, which is a simple, secure protocol for granting API access. In a nutshell, OAuth allows a user to connect an application to their Twitter account without having to share their password. Instead, the user is sent to Twitter's website where they confirm whether they want to connect to the application. Upon confirmation, Twitter generates an token that is then sent back to the application. The application then submits this token when integrating with the user's account. The token serves as proof that the user has allowed this application access to their account. (Twitter users can view what application's they're connected to and may revoke these tokens on an application-by-application basis.) In late 2009, Twitter announced that it was ending its support for basic authentication in June 2010. As a result, the code examined in Integrating Twitter Into An ASP.NET Website, which uses basic authentication, will no longer work once the cut off date is reached. The good news is that the Twitterizer version 2.0 supports OAuth. This article examines how to use Twitterizer 2.0 and OAuth from a website. Specifically, we'll see how to retrieve and display a user's latest tweets and how to post a tweet from an ASP.NET page. Read on to learn more! Read More >

    Read the article

  • Integrating Twitter Into An ASP.NET Website Using OAuth

    Earlier this year I wrote an article about Twitterizer, an open-source .NET library that can be used to integrate your application with Twitter. Using Twitterizer you can allow your visitors to post tweets, view their timeline, and much more, all without leaving your website. The original article, Integrating Twitter Into An ASP.NET Website, showed how to post tweets and view a timeline to a particular Twitter account using Twitterizer 1.0. To post a tweet to a specific account, Twitterizer 1.0 uses basic authentication. Basic authentication is a very simple authentication scheme. For an application to post a tweet to JohnDoe's Twitter account, it would submit JohnDoe's username and password (along with the tweet text) to Twitter's servers. Basic authentication, while easy to implement, is not an ideal authentication scheme as it requires that the integrating application know the username(s) and password(s) of the accounts that it is connected to. Consequently, a user must share her password in order to connect her Twitter account with the application. Such password sharing is not only insecure, but it can also cause difficulties down the line if the user changes her password or decides that she no longer wants to connect her account to certain applications (but wants to remain connected to others). To remedy these issues, Twitter introduced support for OAuth, which is a simple, secure protocol for granting API access. In a nutshell, OAuth allows a user to connect an application to their Twitter account without having to share their password. Instead, the user is sent to Twitter's website where they confirm whether they want to connect to the application. Upon confirmation, Twitter generates an token that is then sent back to the application. The application then submits this token when integrating with the user's account. The token serves as proof that the user has allowed this application access to their account. (Twitter users can view what application's they're connected to and may revoke these tokens on an application-by-application basis.) In late 2009, Twitter announced that it was ending its support for basic authentication in June 2010. As a result, the code examined in Integrating Twitter Into An ASP.NET Website, which uses basic authentication, will no longer work once the cut off date is reached. The good news is that the Twitterizer version 2.0 supports OAuth. This article examines how to use Twitterizer 2.0 and OAuth from a website. Specifically, we'll see how to retrieve and display a user's latest tweets and how to post a tweet from an ASP.NET page. Read on to learn more! Read More >Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Squid on an Azure VM

    - by LantisGaius
    I can't get it to work. Here's exactly what I did: Create a new Azure VM, Windows Server 2012. RDP to the new VM Download & Extract Squid for Windows (2.7.STABLE8) Rename the conf files (squid, mime & cachemgr) Add the following lines on the end of squid.conf auth_param basic program c:/squid/libexec/ncsa_auth.exe c:/squid/etc/passwd.txt auth_param basic children 5 auth_param basic realm Welcome to http://abcde.fg Squid Proxy! auth_param basic credentialsttl 12 hours auth_param basic casesensitive off acl ncsa_users proxy_auth REQUIRED http_access allow ncsa_users Use http://www.htaccesstools.com/htpasswd-generator-windows/ to create passwd.txt Test passwd.txt via c:/squid/libexec/ncsa_auth.exe c:/squid/etc/passwd.txt (success) squid -z squid -i net start squid (No errors so far). go to https://manage.windowsazure.com, Virtual Machines - myVM - Endpoints Add Endpoint: Name: Squid Protocol: TCP Public Port: 80 Private Port: 3128 That's it. Unfortunately, it doesn't work. I think I screwed something up at the endpoint? I'm not sure.. help? EDIT: I'm testing it via Firefox - Options - Advanced - Network, and the exact error is "The Proxy Server is refusing connections." I'm using my DNS as the Proxy server "abcdef.cloudapp.net" and port 80 (since that's my public endpoint).

    Read the article

  • ubuntu hardrive repartition without uninstalling ubuntu or windows 7 and losing data of hardrive

    - by user141692
    I have and asus r500v with 750 gb gpt system uefi motherboard core i7 3610qm, nvidia geforce gt, with ubuntu and w7 dual boot, I had problems installing ubuntu because of the grub but I fix it with https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/807801, but I still have the problem of "warning: the partition is misaligned by 3072 bytes. this may result iin very poor performance. Repartitioning is suggested" in every linux partitioin I made and my 750 gb is not being used at the maximun capacity it only uses 698 gb. I want to make partitions so that the warning doesnt show up and I can use the maximum capacity of the HDD, as I did with another dual boot laptop (compaq presario cq40). I have the following partitions: unknown 1.0Mb: partition type: lynux Basic DAta partition, device: /dev/sda2 Usage: --, Partition flags: --, partition label:-- warning: the partition is misaligned by 3072 bytes. this may result in very poor performance. repartitioning is suggested. -system 210 Mb FAt, usage: Filesystem, partition type: EFI system Partition, Partition Flags:--, Label: system, Device: /dev/sda1, partition label: EFI system partition, Capacity 210MB, avilable:--, Mount Point: mounted at /boot/efi -134 Mb NTFS, usage: filesystem, partition type: linux basic data partition, partition flags:.--, device: /dev/sda7, partition label: --, capacity: 134MB,available:--, mount point: not mounted -OS 250 GB NTFS, usage: file system, partititon type: linux basic data partition, partition flags: --, type: NTFS, label: OS, device: /dev/sda3, partition label: basic data partition, capacity: 250 GB, available:-, mount point: not mounted -10GB FAT 32, usage: filesystem, partition type: EFI system partition, partition flags:--, type: FAT 32, label: --, device: /dev/sda4, partition label: --, capacity: 10GB, available:--, mount point: not mounted warning: the partition is misaligned by 3072 bytes. this may result in very poor performance. repartitioning is suggested. -10gb ext 4, usage: file system, partition type: linux basic data partition, partition flags:--, type: EXT4(version1) label:--, device: /dev/sda9, partition label:--, capacity: 10 GB, available:--, mount point at / warning: the partition is misaligned by 1536 bytes. this may result in very poor performance. repartitioning is suggested. -478GB ext4, usage: filesystem, partition type: linux basic data partition, partition flags:--, type: EXT4, label:--, device: /dev/sda5, partition label:--, capacity: 478gb, available:--, mount point: mounted at /home warning: the partition is misaligned by 512 bytes. this may result in very poor performance. repartitioning is suggested. -2.0gb Swap 2.0Gb, usage: swap space, partition type: linux swap partitioin, partition flags:-, device: /dev/sda6, partition label: capacity: 2.0gb warning: the partition is misaligned by 512 bytes. this may result in very poor performance. repartitioning is suggested. and as you can see it is not well organized so please help me to organize the partitions witahout uninstalling the w7, and if possible the grub2

    Read the article

  • Penetration testing - common examples?

    - by Mirek
    Hi, I was charged to do some basic penetration testing on our system. I tried to find some favoured practices but I was not successful. I guess SYN attack is retired (no NT here). Could anyone advice some basic steps of what to test in order to proceed at least very basic penetration test? Thanks

    Read the article

  • Creating yahoo pipe from google cal feed results in german language headings [closed]

    - by kevyn
    I'm trying to create a Yahoo pipe which combines 4 google calendar RSS feeds into a single feed sorted by date. I've created a yahoo pipe to do this (Which can be found here) The problem is, the headings all appear in German! I've searched online and the only suggestion to be made is this one which suggests that: It's actually Google doing the translation based on the requester IP and doing a geolocation based on that IP. and they suggest changing the .com to a .co.uk, however this does not work for me as yahoo pipes cannot find the feed (403 error) Does anyone have a solution? if there is another solution other than yahoo pipes then I'm all ears! here are the feeds i'm trying to combine: http://www.google.com/calendar/feeds/8tqsfkbs00erv85u2shenea60s%40group.calendar.google.com/public/basic http://www.google.com/calendar/feeds/di85fkb2u1m4si1sqar9d73ghk%40group.calendar.google.com/public/basic http://www.google.com/calendar/feeds/oq5k4pevdjgb4o59muiml72i2k%40group.calendar.google.com/public/basic http://www.google.com/calendar/feeds/f1gg60fr3esdovp15gp83traec%40group.calendar.google.com/public/basic thanks in advance :-)

    Read the article

  • VS2008 VB project - Changing application type automatically adds references

    - by Stijn
    Visual Basic Create a new project with the Empty Project template (Visual Basic - Windows) Go to the project properties, and change the Application type by choosing something else or reselecting Windows Forms Application. When reselecting, Visual Studio will automatically add references to System.Deployment, System.Drawing and System.Windows.Forms C# Create a new project with the Empty Project template (Visual C# - Windows) Go to the project properties, and change the Application type to any of the choices. Visual studio will not add references. Question Is there a way to change this behaviour for Visual Basic?

    Read the article

  • Allowing users in from an IP address without certificate client authentication

    - by John
    I need to allow access to my site without SSL certificates from my office network and with SSL certificates outside. Here is my configuration: <Directory /srv/www> AllowOverride All Order deny,allow Deny from all # office network static IP Allow from xxx.xxx.xxx.xxx SSLVerifyClient require SSLOptions +FakeBasicAuth AuthName "My secure area" AuthType Basic AuthUserFile /etc/httpd/ssl/index Require valid-user Satisfy Any </Directory> When I'm inside network and have certificate - I can access. When I'm inside network and haven't certificate - I can't access, it requires certificate. When I'm outside network and have certificate - I can't access, it shows me basic login screen When I'm outside network and haven't certificate - I can't access, it shows me basic login screen and following configuration works perfectly <Directory /srv/www> AllowOverride All Order deny,allow Deny from all Allow from xxx.xxx.xxx.xxx AuthUserFile /srv/www/htpasswd AuthName "Restricted Access" AuthType Basic Require valid-user Satisfy Any </Directory>

    Read the article

  • How to Reuse Your Old Wi-Fi Router as a Network Switch

    - by Jason Fitzpatrick
    Just because your old Wi-Fi router has been replaced by a newer model doesn’t mean it needs to gather dust in the closet. Read on as we show you how to take an old and underpowered Wi-Fi router and turn it into a respectable network switch (saving your $20 in the process). Image by mmgallan. Why Do I Want To Do This? Wi-Fi technology has changed significantly in the last ten years but Ethernet-based networking has changed very little. As such, a Wi-Fi router with 2006-era guts is lagging significantly behind current Wi-Fi router technology, but the Ethernet networking component of the device is just as useful as ever; aside from potentially being only 100Mbs instead of 1000Mbs capable (which for 99% of home applications is irrelevant) Ethernet is Ethernet. What does this matter to you, the consumer? It means that even though your old router doesn’t hack it for your Wi-Fi needs any longer the device is still a perfectly serviceable (and high quality) network switch. When do you need a network switch? Any time you want to share an Ethernet cable among multiple devices, you need a switch. For example, let’s say you have a single Ethernet wall jack behind your entertainment center. Unfortunately you have four devices that you want to link to your local network via hardline including your smart HDTV, DVR, Xbox, and a little Raspberry Pi running XBMC. Instead of spending $20-30 to purchase a brand new switch of comparable build quality to your old Wi-Fi router it makes financial sense (and is environmentally friendly) to invest five minutes of your time tweaking the settings on the old router to turn it from a Wi-Fi access point and routing tool into a network switch–perfect for dropping behind your entertainment center so that your DVR, Xbox, and media center computer can all share an Ethernet connection. What Do I Need? For this tutorial you’ll need a few things, all of which you likely have readily on hand or are free for download. To follow the basic portion of the tutorial, you’ll need the following: 1 Wi-Fi router with Ethernet ports 1 Computer with Ethernet jack 1 Ethernet cable For the advanced tutorial you’ll need all of those things, plus: 1 copy of DD-WRT firmware for your Wi-Fi router We’re conducting the experiment with a Linksys WRT54GL Wi-Fi router. The WRT54 series is one of the best selling Wi-Fi router series of all time and there’s a good chance a significant number of readers have one (or more) of them stuffed in an office closet. Even if you don’t have one of the WRT54 series routers, however, the principles we’re outlining here apply to all Wi-Fi routers; as long as your router administration panel allows the necessary changes you can follow right along with us. A quick note on the difference between the basic and advanced versions of this tutorial before we proceed. Your typical Wi-Fi router has 5 Ethernet ports on the back: 1 labeled “Internet”, “WAN”, or a variation thereof and intended to be connected to your DSL/Cable modem, and 4 labeled 1-4 intended to connect Ethernet devices like computers, printers, and game consoles directly to the Wi-Fi router. When you convert a Wi-Fi router to a switch, in most situations, you’ll lose two port as the “Internet” port cannot be used as a normal switch port and one of the switch ports becomes the input port for the Ethernet cable linking the switch to the main network. This means, referencing the diagram above, you’d lose the WAN port and LAN port 1, but retain LAN ports 2, 3, and 4 for use. If you only need to switch for 2-3 devices this may be satisfactory. However, for those of you that would prefer a more traditional switch setup where there is a dedicated WAN port and the rest of the ports are accessible, you’ll need to flash a third-party router firmware like the powerful DD-WRT onto your device. Doing so opens up the router to a greater degree of modification and allows you to assign the previously reserved WAN port to the switch, thus opening up LAN ports 1-4. Even if you don’t intend to use that extra port, DD-WRT offers you so many more options that it’s worth the extra few steps. Preparing Your Router for Life as a Switch Before we jump right in to shutting down the Wi-Fi functionality and repurposing your device as a network switch, there are a few important prep steps to attend to. First, you want to reset the router (if you just flashed a new firmware to your router, skip this step). Following the reset procedures for your particular router or go with what is known as the “Peacock Method” wherein you hold down the reset button for thirty seconds, unplug the router and wait (while still holding the reset button) for thirty seconds, and then plug it in while, again, continuing to hold down the rest button. Over the life of a router there are a variety of changes made, big and small, so it’s best to wipe them all back to the factory default before repurposing the router as a switch. Second, after resetting, we need to change the IP address of the device on the local network to an address which does not directly conflict with the new router. The typical default IP address for a home router is 192.168.1.1; if you ever need to get back into the administration panel of the router-turned-switch to check on things or make changes it will be a real hassle if the IP address of the device conflicts with the new home router. The simplest way to deal with this is to assign an address close to the actual router address but outside the range of addresses that your router will assign via the DHCP client; a good pick then is 192.168.1.2. Once the router is reset (or re-flashed) and has been assigned a new IP address, it’s time to configure it as a switch. Basic Router to Switch Configuration If you don’t want to (or need to) flash new firmware onto your device to open up that extra port, this is the section of the tutorial for you: we’ll cover how to take a stock router, our previously mentioned WRT54 series Linksys, and convert it to a switch. Hook the Wi-Fi router up to the network via one of the LAN ports (consider the WAN port as good as dead from this point forward, unless you start using the router in its traditional function again or later flash a more advanced firmware to the device, the port is officially retired at this point). Open the administration control panel via  web browser on a connected computer. Before we get started two things: first,  anything we don’t explicitly instruct you to change should be left in the default factory-reset setting as you find it, and two, change the settings in the order we list them as some settings can’t be changed after certain features are disabled. To start, let’s navigate to Setup ->Basic Setup. Here you need to change the following things: Local IP Address: [different than the primary router, e.g. 192.168.1.2] Subnet Mask: [same as the primary router, e.g. 255.255.255.0] DHCP Server: Disable Save with the “Save Settings” button and then navigate to Setup -> Advanced Routing: Operating Mode: Router This particular setting is very counterintuitive. The “Operating Mode” toggle tells the device whether or not it should enable the Network Address Translation (NAT)  feature. Because we’re turning a smart piece of networking hardware into a relatively dumb one, we don’t need this feature so we switch from Gateway mode (NAT on) to Router mode (NAT off). Our next stop is Wireless -> Basic Wireless Settings: Wireless SSID Broadcast: Disable Wireless Network Mode: Disabled After disabling the wireless we’re going to, again, do something counterintuitive. Navigate to Wireless -> Wireless Security and set the following parameters: Security Mode: WPA2 Personal WPA Algorithms: TKIP+AES WPA Shared Key: [select some random string of letters, numbers, and symbols like JF#d$di!Hdgio890] Now you may be asking yourself, why on Earth are we setting a rather secure Wi-Fi configuration on a Wi-Fi router we’re not going to use as a Wi-Fi node? On the off chance that something strange happens after, say, a power outage when your router-turned-switch cycles on and off a bunch of times and the Wi-Fi functionality is activated we don’t want to be running the Wi-Fi node wide open and granting unfettered access to your network. While the chances of this are next-to-nonexistent, it takes only a few seconds to apply the security measure so there’s little reason not to. Save your changes and navigate to Security ->Firewall. Uncheck everything but Filter Multicast Firewall Protect: Disable At this point you can save your changes again, review the changes you’ve made to ensure they all stuck, and then deploy your “new” switch wherever it is needed. Advanced Router to Switch Configuration For the advanced configuration, you’ll need a copy of DD-WRT installed on your router. Although doing so is an extra few steps, it gives you a lot more control over the process and liberates an extra port on the device. Hook the Wi-Fi router up to the network via one of the LAN ports (later you can switch the cable to the WAN port). Open the administration control panel via web browser on the connected computer. Navigate to the Setup -> Basic Setup tab to get started. In the Basic Setup tab, ensure the following settings are adjusted. The setting changes are not optional and are required to turn the Wi-Fi router into a switch. WAN Connection Type: Disabled Local IP Address: [different than the primary router, e.g. 192.168.1.2] Subnet Mask: [same as the primary router, e.g. 255.255.255.0] DHCP Server: Disable In addition to disabling the DHCP server, also uncheck all the DNSMasq boxes as the bottom of the DHCP sub-menu. If you want to activate the extra port (and why wouldn’t you), in the WAN port section: Assign WAN Port to Switch [X] At this point the router has become a switch and you have access to the WAN port so the LAN ports are all free. Since we’re already in the control panel, however, we might as well flip a few optional toggles that further lock down the switch and prevent something odd from happening. The optional settings are arranged via the menu you find them in. Remember to save your settings with the save button before moving onto a new tab. While still in the Setup -> Basic Setup menu, change the following: Gateway/Local DNS : [IP address of primary router, e.g. 192.168.1.1] NTP Client : Disable The next step is to turn off the radio completely (which not only kills the Wi-Fi but actually powers the physical radio chip off). Navigate to Wireless -> Advanced Settings -> Radio Time Restrictions: Radio Scheduling: Enable Select “Always Off” There’s no need to create a potential security problem by leaving the Wi-Fi radio on, the above toggle turns it completely off. Under Services -> Services: DNSMasq : Disable ttraff Daemon : Disable Under the Security -> Firewall tab, uncheck every box except “Filter Multicast”, as seen in the screenshot above, and then disable SPI Firewall. Once you’re done here save and move on to the Administration tab. Under Administration -> Management:  Info Site Password Protection : Enable Info Site MAC Masking : Disable CRON : Disable 802.1x : Disable Routing : Disable After this final round of tweaks, save and then apply your settings. Your router has now been, strategically, dumbed down enough to plod along as a very dependable little switch. Time to stuff it behind your desk or entertainment center and streamline your cabling.     

    Read the article

  • What should I "forget" when going to Javascript?

    - by ElGringoGrande
    I went from C=64 Basic and assembler to FORTRAN and C to C++ and Java. Professionally I started in Visual Basic for applications then to Visual Basic 4, 5, 6. After that VB.NET AND C# with some Java here and there. I have played with Ruby and Python and found both fun. During each step I never felt like I had to forget what I had learned before. I always felt like I was just learning better and/or slightly different ways of doing things but the difference was not major. The difference was like the difference between American, Australian and British English. (Maybe assembler was Latin and FORTRAN was Spanish.) But now I am using JavaScript to do real, actual work. (Before used it as a "Scripting" language pure a simple.) And I just feel like I have to forget some things to become proficient in it. It feels like some old Egyptian language. What should I forget? Is it just that code organization is different (no real classes so no one class one file)? Or is it something more basic?

    Read the article

  • Adding Volcanos and Options - Earthquake Locator, part 2

    - by Bobby Diaz
    Since volcanos are often associated with earthquakes, and vice versa, I decided to show recent volcanic activity on the Earthquake Locator map.  I am pulling the data from a website created for a joint project between the Smithsonian's Global Volcanism Program and the US Geological Survey's Volcano Hazards Program, found here.  They provide a Weekly Volcanic Activity Report as an RSS feed.   I started implementing this new functionality by creating a new Volcano entity in the domain model and adding the following to the EarthquakeService class (I also factored out the common reading/parsing helper methods to a separate FeedReader class that can be used by multiple domain service classes):           private static readonly string VolcanoFeedUrl =             ConfigurationManager.AppSettings["VolcanoFeedUrl"];           /// <summary>         /// Gets the volcano data for the previous week.         /// </summary>         /// <returns>A queryable collection of <see cref="Volcano"/> objects.</returns>         public IQueryable<Volcano> GetVolcanos()         {             var feed = FeedReader.Load(VolcanoFeedUrl);             var list = new List<Volcano>();               if ( feed != null )             {                 foreach ( var item in feed.Items )                 {                     var quake = CreateVolcano(item);                     if ( quake != null )                     {                         list.Add(quake);                     }                 }             }               return list.AsQueryable();         }           /// <summary>         /// Creates a <see cref="Volcano"/> object for each item in the RSS feed.         /// </summary>         /// <param name="item">The RSS item.</param>         /// <returns></returns>         private Volcano CreateVolcano(SyndicationItem item)         {             Volcano volcano = null;             string title = item.Title.Text;             string desc = item.Summary.Text;             double? latitude = null;             double? longitude = null;               FeedReader.GetGeoRssPoint(item, out latitude, out longitude);               if ( !String.IsNullOrEmpty(title) )             {                 title = title.Substring(0, title.IndexOf('-'));             }             if ( !String.IsNullOrEmpty(desc) )             {                 desc = String.Join("\n\n", desc                         .Replace("<p>", "")                         .Split(                             new string[] { "</p>" },                             StringSplitOptions.RemoveEmptyEntries)                         .Select(s => s.Trim())                         .ToArray())                         .Trim();             }               if ( latitude != null && longitude != null )             {                 volcano = new Volcano()                 {                     Id = item.Id,                     Title = title,                     Description = desc,                     Url = item.Links.Select(l => l.Uri.OriginalString).FirstOrDefault(),                     Latitude = latitude.GetValueOrDefault(),                     Longitude = longitude.GetValueOrDefault()                 };             }               return volcano;         } I then added the corresponding LoadVolcanos() method and Volcanos collection to the EarthquakeViewModel class in much the same way I did with the Earthquakes in my previous article in this series. Now that I am starting to add more information to the map, I wanted to give the user some options as to what is displayed and allowing them to choose what gets turned off.  I have updated the MainPage.xaml to look like this:   <UserControl x:Class="EarthquakeLocator.MainPage"     xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"     xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"     xmlns:d="http://schemas.microsoft.com/expression/blend/2008"     xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"     xmlns:basic="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls"     xmlns:bing="clr-namespace:Microsoft.Maps.MapControl;assembly=Microsoft.Maps.MapControl"     xmlns:vm="clr-namespace:EarthquakeLocator.ViewModel"     mc:Ignorable="d" d:DesignWidth="640" d:DesignHeight="480" >     <UserControl.Resources>         <DataTemplate x:Key="EarthquakeTemplate">             <Ellipse Fill="Red" Stroke="Black" StrokeThickness="1"                      Width="{Binding Size}" Height="{Binding Size}"                      bing:MapLayer.Position="{Binding Location}"                      bing:MapLayer.PositionOrigin="Center">                 <ToolTipService.ToolTip>                     <StackPanel>                         <TextBlock Text="{Binding Title}" FontSize="14" FontWeight="Bold" />                         <TextBlock Text="{Binding UtcTime}" />                         <TextBlock Text="{Binding LocalTime}" />                         <TextBlock Text="{Binding DepthDesc}" />                     </StackPanel>                 </ToolTipService.ToolTip>             </Ellipse>         </DataTemplate>           <DataTemplate x:Key="VolcanoTemplate">             <Polygon Fill="Gold" Stroke="Black" StrokeThickness="1" Points="0,10 5,0 10,10"                      bing:MapLayer.Position="{Binding Location}"                      bing:MapLayer.PositionOrigin="Center"                      MouseLeftButtonUp="Volcano_MouseLeftButtonUp">                 <ToolTipService.ToolTip>                     <StackPanel>                         <TextBlock Text="{Binding Title}" FontSize="14" FontWeight="Bold" />                         <TextBlock Text="Click icon for more information..." />                     </StackPanel>                 </ToolTipService.ToolTip>             </Polygon>         </DataTemplate>     </UserControl.Resources>       <UserControl.DataContext>         <vm:EarthquakeViewModel AutoLoadData="True" />     </UserControl.DataContext>       <Grid x:Name="LayoutRoot">           <bing:Map x:Name="map" CredentialsProvider="--Your-Bing-Maps-Key--"                   Center="{Binding MapCenter, Mode=TwoWay}"                   ZoomLevel="{Binding ZoomLevel, Mode=TwoWay}">               <bing:MapItemsControl ItemsSource="{Binding Earthquakes}"                                   ItemTemplate="{StaticResource EarthquakeTemplate}" />               <bing:MapItemsControl ItemsSource="{Binding Volcanos}"                                   ItemTemplate="{StaticResource VolcanoTemplate}" />         </bing:Map>           <basic:TabControl x:Name="tabs" VerticalAlignment="Bottom" MaxHeight="25" Opacity="0.7">             <basic:TabItem Margin="90,0,-90,0" MouseLeftButtonUp="TabItem_MouseLeftButtonUp">                 <basic:TabItem.Header>                     <TextBlock x:Name="txtHeader" Text="Options"                                FontSize="13" FontWeight="Bold" />                 </basic:TabItem.Header>                   <StackPanel Orientation="Horizontal">                     <TextBlock Text="Earthquakes:" FontWeight="Bold" Margin="3" />                     <StackPanel Margin="3">                         <CheckBox Content=" &lt; 4.0"                                   IsChecked="{Binding ShowLt4, Mode=TwoWay}" />                         <CheckBox Content="4.0 - 4.9"                                   IsChecked="{Binding Show4s, Mode=TwoWay}" />                         <CheckBox Content="5.0 - 5.9"                                   IsChecked="{Binding Show5s, Mode=TwoWay}" />                     </StackPanel>                       <StackPanel Margin="10,3,3,3">                         <CheckBox Content="6.0 - 6.9"                                   IsChecked="{Binding Show6s, Mode=TwoWay}" />                         <CheckBox Content="7.0 - 7.9"                                   IsChecked="{Binding Show7s, Mode=TwoWay}" />                         <CheckBox Content="8.0 +"                                   IsChecked="{Binding ShowGe8, Mode=TwoWay}" />                     </StackPanel>                       <TextBlock Text="Other:" FontWeight="Bold" Margin="50,3,3,3" />                     <StackPanel Margin="3">                         <CheckBox Content="Volcanos"                                   IsChecked="{Binding ShowVolcanos, Mode=TwoWay}" />                     </StackPanel>                 </StackPanel>               </basic:TabItem>         </basic:TabControl>       </Grid> </UserControl> Notice that I added a VolcanoTemplate that uses a triangle-shaped Polygon to represent the Volcano locations, and I also added a second <bing:MapItemsControl /> tag to the map to bind to the Volcanos collection.  The TabControl found below the map houses the options panel that will present the user with several checkboxes so they can filter the different points based on type and other properties (i.e. Magnitude).  Initially, the TabItem is collapsed to reduce it's footprint, but the screen shot below shows the options panel expanded to reveal the available settings:     I have updated the Source Code and Live Demo to include these new features.   Happy Mapping!

    Read the article

  • 8 tips for your Windows Store apps

    - by nmarun
    1. Use Basic page than a blank template For a good number of your tasks, you probably need a Basic page. For starters, this page gives you the bare-bones required – a ‘Go back’ button and a placeholder for the applcation name. This page also contains the VisualState for Snapped view, so you don’t have to handle it in code. When you choose to add a basic page to an empty solution, you’ll get a prompt like below. Clicking on yes, adds some of the following files: LayoutAwarePage – handles GoBack and...(read more)

    Read the article

  • College Courses through distance learning

    - by Matt
    I realize this isn't really a programming question, but didn't really know where to post this in the stackexchange and because I am a computer science major i thought id ask here. This is pretty unique to the programmer community since my degree is about 95% programming. I have 1 semester left, but i work full time. I would like to finish up in December, but to make things easier i like to take online classes whenever I can. So, my question is does anyone know of any colleges that offer distance learning courses for computer science? I have been searching around and found a few potential classes, but not sure yet. I would like to gather some classes and see what i can get approval for. Class I need: Only need one C SC 437 Geometric Algorithms C SC 445 Algorithms C SC 473 Automata Only need one C SC 452 Operating Systems C SC 453 Compilers/Systems Software While i only need of each of the above courses i still need to take two more electives. These also have to be upper 400 level classes. So i can take multiple in each category. Some other classes I can take are: CSC 447 - Green Computing CSC 425 - Computer Networking CSC 460 - Database Design CSC 466 - Computer Security I hoping to take one or two of these courses over the summer. If not, then online over the regular semester would be ok too. Any help in helping find these classes would be awesome. Maybe you went to a college that offered distance learning. Some of these classes may be considered to be graduate courses too. Descriptions are listed below if you need. Thanks! Descriptions Computer Security This is an introductory course covering the fundamentals of computer security. In particular, the course will cover basic concepts of computer security such as threat models and security policies, and will show how these concepts apply to specific areas such as communication security, software security, operating systems security, network security, web security, and hardware-based security. Computer Networking Theory and practice of computer networks, emphasizing the principles underlying the design of network software and the role of the communications system in distributed computing. Topics include routing, flow and congestion control, end-to-end protocols, and multicast. Database Design Functions of a database system. Data modeling and logical database design. Query languages and query optimization. Efficient data storage and access. Database access through standalone and web applications. Green Computing This course covers fundamental principles of energy management faced by designers of hardware, operating systems, and data centers. We will explore basic energy management option in individual components such as CPUs, network interfaces, hard drives, memory. We will further present the energy management policies at the operating system level that consider performance vs. energy saving tradeoffs. Finally we will consider large scale data centers where energy management is done at multiple layers from individual components in the system to shutting down entries subset of machines. We will also discuss energy generation and delivery and well as cooling issues in large data centers. Compilers/Systems Software Basic concepts of compilation and related systems software. Topics include lexical analysis, parsing, semantic analysis, code generation; assemblers, loaders, linkers; debuggers. Operating Systems Concepts of modern operating systems; concurrent processes; process synchronization and communication; resource allocation; kernels; deadlock; memory management; file systems. Algorithms Introduction to the design and analysis of algorithms: basic analysis techniques (asymptotics, sums, recurrences); basic design techniques (divide and conquer, dynamic programming, greedy, amortization); acquiring an algorithm repertoire (sorting, median finding, strong components, spanning trees, shortest paths, maximum flow, string matching); and handling intractability (approximation algorithms, branch and bound). Automata Introduction to models of computation (finite automata, pushdown automata, Turing machines), representations of languages (regular expressions, context-free grammars), and the basic hierarchy of languages (regular, context-free, decidable, and undecidable languages). Geometric Algorithms The study of algorithms for geometric objects, using a computational geometry approach, with an emphasis on applications for graphics, VLSI, GIS, robotics, and sensor networks. Topics may include the representation and overlaying of maps, finding nearest neighbors, solving linear programming problems, and searching geometric databases.

    Read the article

  • Get Hands On with Raspberry Pi via Free OS-Building Course

    - by Jason Fitzpatrick
    Cambridge University is now offering a free 12-segment course that will guide you through building an OS from scratch for the tiny Raspberry Pi development board–learn the ins and outs of basic OS design on the cheap. You’ll need a Raspberry Pi board, a computer running Windows, OS X, or Linux, and an SD card, as well as a small amount of free software. The 12-part tutorial starts you off with basic OS theory and then walks you through basic control of the board, graphics manipulation, and, finally, creating a command line interface for your new operating system. Hit up the link below to read more and check out the lessons. Baking Pi – Operating Systems Development HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows?

    Read the article

  • When should one use the Abstract, Implements, or extends keywords?

    - by kdavis8
    I'm just now moving from a beginner to intermediate level android programmer in the java language. i can successfully write a game framework of classes that work together to accomplish a task beyond basic things, like hello world. but i'm having issues with some pretty basic OOP concepts; When should i derive from an abstract class? When is it more efficient to use an Interface instead of simply sub classing a parent? Basically, between extends, implements, and the abstract keywords, which keywords should be used instead of the others? i'm not looking for a basic definition, as i know them. i need to no when and why i should apply them to my code? what advantages does one have over the other? which is best for game development?

    Read the article

  • What are the Starting Games I need to make?[Best steps for a beginner Game Developer?] [closed]

    - by Man With Steel Nerves...
    Possible Duplicate: What are good games to “earn your wings” with? Hai, I'm new to the genre "Creating Games".Previously i had done only porting.I need some suggestion's for making a game. What are the basic game logics i need to start with? - Should i write Tic-Tac-Toe game? - Actually this seem very basic to me. I'm totally confused on where to start with.I like to create big games but after starting i feel the game is too heavy to handle. Can any one list out the basic needs of a Game Play programmer? I don't mind using any platform (Flash,c++,objective-c) but i need to know what are the game logic's i need to know before i start a big game.

    Read the article

  • Useful programming languages for hardware programming

    - by Sebastian Griotberg
    I am thinking to take the next semester a course called "Digital systems architecture", and I know that we need to program micro-controllers with several programming languages such as C, C++, verilog, and VHDL. I want to be prepared to take that course, but I need to know if I need to study deeper these languages. At this moment, I have taken one course in basic Java dealing with basic methods, data types, loop structures, vectors, matrices, and GUI programing. Must I study deeper Java and then go with C, and C++? Besides, I know basic verilog and VHDL.

    Read the article

  • Tyrus 1.8

    - by Pavel Bucek
    Another version of Tyrus, the reference implementation of JSR 356 – Java API for WebSocket is out! Complete list of fixes and features is below, but let me describe some of the new features in more detail. All information presented here is also available in Tyrusdocumentation. What’s new? First to mention is that JSR 356 Maintenance review Ballot is over and the change proposed for 1.1 release was accepted. More details about changes in the API can be found in this article. Important part is that Tyrus 1.8 implements this API, meaning you can use Lambda expressions and some features of Nashorn without the need for any workarounds. Almost all other features are related to client side support, which was significantly improved in this release. Firstly – I have to admit, that Tyrus client contained security issue – SSL Hostname verification was not performed when connecting to “wss” endpoints. This was fixed as part of TYRUS-339 and resulted in some changes in the client configuration API. Now you can control whether HostnameVerification should be performed (SslEngineConfigurator#setHostnameVerificationEnabled(boolean)) or even set your own HostnameVerifier (please use carefully): #setHostnameVerifier(…). Detailed description can be found in Host verification chapter. Another related enhancement is support for Http Basic and Digest authentication schemes. Tyrus client now enables users to provide credentials and underlying implementation will take care of everything else. Our implementation is strictly non pre-emptive, so the login information is sent always as a response to 401 Http Status Code. If the Basic and Digest are not good enough and there is a need to use some custom scheme or something which is not yet supported in Tyrus, custom Authenticator can be registered and the authentication part of the handshake process will be handled by it. Please seeClient HTTP Authentication chapter in the user guide for more details. There are other features, like fine-grain threadpool configuration for JDK client container, build-in Http redirect support and some reshuffling related to unifying the location of client configuration classes and properties definition – every property should be now part of ClientProperties class. All new features are described in the user guide – in chapterTyrus proprietary configuration. Update – Tyrus 1.8.1 There was another slightly late reported issue related to running in environments with SecurityManager enabled, so this version fixes that. Another noteworthy fixes are TYRUS-355 and TYRUS-361; the first one is about incorrect thread factory used for shared container timeout, which resulted in JVM waiting for that thread and not exiting as it should. The other issue enables relative URIs in Location header when using redirect feature. Links Tyrus homepage mailing list JIRA Complete list of changes: Bug [TYRUS-333] – Multiple endpoints on one client [TYRUS-334] – When connection is closed by a peer, periodic heartbeat pong is not stopped [TYRUS-336] – ReaderBuffer.getNextChars() keeps blocking a server thread after client has closed the session [TYRUS-338] – JDK client SSL filter needs better synchronization during handshake phase [TYRUS-339] – SSL hostname verification is missing [TYRUS-340] – Test PathParamTest are not stable with JDK client [TYRUS-341] – A control frame inside a stream of continuation frames is treated as the part of the stream [TYRUS-343] – ControlFrameInDataStreamTest does not pass on GF [TYRUS-345] – NPE is thrown, when shared container timeout property in JDK client is not set [TYRUS-346] – IllegalStateException is thrown, when using proxy in JDK client [TYRUS-347] – Introduce better synchronization in JDK client thread pool [TYRUS-348] – When a client and server close connection simultaneously, JDK client throws NPE [TYRUS-356] – Tyrus cannot determine the connection port for a wss URL [TYRUS-357] – Exception thrown in MessageHandler#OnMessage is not caught in @OnError method [TYRUS-359] – Client based on Java 7 Asynchronous IO makes application unexitable Improvement [TYRUS-328] – JDK 1.7 AIO Client container – threads – (setting threadpool, limits, …) [TYRUS-332] – Consolidate shared client properties into one file. [TYRUS-337] – Create an SSL version of Basic Servlet test New Feature [TYRUS-228] – Add client support for HTTP Basic/Digest Task [TYRUS-330] – create/run tests/servlet/basic via wss [TYRUS-335] – [clustering] – introduce RemoteSession and expose them via separate method (not include remote sessions in the getOpenSessions()) [TYRUS-344] – Introduce Client support for HTTP Redirect

    Read the article

  • How can I define a clojure type that implements the servlet interface?

    - by Rob Lachlan
    I'm attempting to use deftype (from the bleeding-edge clojure 1.2 branch) to create a java class that implements the java Servlet interface. I would expect the code below to compile (even though it's not very useful). (ns foo [:import [javax.servlet Servlet ServletRequest ServletResponse]]) (deftype servlet [] javax.servlet.Servlet (service [this #^javax.servlet.ServletRequest request #^javax.servlet.ServletResponse response] nil)) But it doesn't compile. The compiler produces the message: Mismatched return type: service, expected: void, had: java.lang.Object [Thrown class java.lang.IllegalArgumentException] Which doesn't make sense to me, because I'm returning nil. So the fact that the return type of the method is void shouldn't be a problem. For instance, for the java.util.Set interface: (deftype bar [#^Number n] java.util.Set (clear [this] nil)) compiles without issue. So what am I doing wrong with the Servlet interface? To be clear: I know that the typical case is to subclass one of the servlet abstract classes rather than implement this interface directly, but it should still be possible to do this. Stack Trace: The stack trace for the (deftype servlet... is: Mismatched return type: service, expected: void, had: java.lang.Object [Thrown class java.lang.IllegalArgumentException] Restarts: 0: [ABORT] Return to SLIME's top level. Backtrace: 0: clojure.lang.Compiler$NewInstanceMethod.parse(Compiler.java:6461) 1: clojure.lang.Compiler$NewInstanceExpr.build(Compiler.java:6119) 2: clojure.lang.Compiler$NewInstanceExpr$DeftypeParser.parse(Compiler.java:6003) 3: clojure.lang.Compiler.analyzeSeq(Compiler.java:5289) 4: clojure.lang.Compiler.analyze(Compiler.java:5110) 5: clojure.lang.Compiler.analyze(Compiler.java:5071) 6: clojure.lang.Compiler.eval(Compiler.java:5347) 7: clojure.lang.Compiler.eval(Compiler.java:5334) 8: clojure.lang.Compiler.eval(Compiler.java:5311) 9: clojure.core$eval__4350.invoke(core.clj:2364) 10: swank.commands.basic$eval_region__673.invoke(basic.clj:40) 11: swank.commands.basic$eval_region__673.invoke(basic.clj:31) 12: swank.commands.basic$eval__686$listener_eval__687.invoke(basic.clj:54) 13: clojure.lang.Var.invoke(Var.java:365) 14: foo$eval__2285.invoke(NO_SOURCE_FILE) 15: clojure.lang.Compiler.eval(Compiler.java:5343) 16: clojure.lang.Compiler.eval(Compiler.java:5311) 17: clojure.core$eval__4350.invoke(core.clj:2364) 18: swank.core$eval_in_emacs_package__320.invoke(core.clj:59) 19: swank.core$eval_for_emacs__383.invoke(core.clj:128) 20: clojure.lang.Var.invoke(Var.java:373) 21: clojure.lang.AFn.applyToHelper(AFn.java:169) 22: clojure.lang.Var.applyTo(Var.java:482) 23: clojure.core$apply__3776.invoke(core.clj:535) 24: swank.core$eval_from_control__322.invoke(core.clj:66) 25: swank.core$eval_loop__324.invoke(core.clj:71) 26: swank.core$spawn_repl_thread__434$fn__464$fn__465.invoke(core.clj:183) 27: clojure.lang.AFn.applyToHelper(AFn.java:159) 28: clojure.lang.AFn.applyTo(AFn.java:151) 29: clojure.core$apply__3776.invoke(core.clj:535) 30: swank.core$spawn_repl_thread__434$fn__464.doInvoke(core.clj:180) 31: clojure.lang.RestFn.invoke(RestFn.java:398) 32: clojure.lang.AFn.run(AFn.java:24) 33: java.lang.Thread.run(Thread.java:637)

    Read the article

  • Maven struts2 modular archetype failing to generate !

    - by Xinus
    I am trying to generate struts 2 modular archetype using maven but always getting error as archetype not present here is a full output : C:\Users\Administrator>mvn archetype:generate [INFO] Scanning for projects... [INFO] Searching repository for plugin with prefix: 'archetype'. [INFO] ------------------------------------------------------------------------ [INFO] Building Maven Default Project [INFO] task-segment: [archetype:generate] (aggregator-style) [INFO] ------------------------------------------------------------------------ [INFO] Preparing archetype:generate [INFO] No goals needed for project - skipping [INFO] Setting property: classpath.resource.loader.class => 'org.codehaus.plexus .velocity.ContextClassLoaderResourceLoader'. [INFO] Setting property: velocimacro.messages.on => 'false'. [INFO] Setting property: resource.loader => 'classpath'. [INFO] Setting property: resource.manager.logwhenfound => 'false'. [INFO] [archetype:generate {execution: default-cli}] [INFO] Generating project in Interactive mode [INFO] No archetype defined. Using maven-archetype-quickstart (org.apache.maven. archetypes:maven-archetype-quickstart:1.0) Choose archetype: 1: internal -> appfuse-basic-jsf (AppFuse archetype for creating a web applicati on with Hibernate, Spring and JSF) 2: internal -> appfuse-basic-spring (AppFuse archetype for creating a web applic ation with Hibernate, Spring and Spring MVC) 3: internal -> appfuse-basic-struts (AppFuse archetype for creating a web applic ation with Hibernate, Spring and Struts 2) 4: internal -> appfuse-basic-tapestry (AppFuse archetype for creating a web appl ication with Hibernate, Spring and Tapestry 4) 5: internal -> appfuse-core (AppFuse archetype for creating a jar application wi th Hibernate and Spring and XFire) 6: internal -> appfuse-modular-jsf (AppFuse archetype for creating a modular app lication with Hibernate, Spring and JSF) 7: internal -> appfuse-modular-spring (AppFuse archetype for creating a modular application with Hibernate, Spring and Spring MVC) 8: internal -> appfuse-modular-struts (AppFuse archetype for creating a modular application with Hibernate, Spring and Struts 2) 9: internal -> appfuse-modular-tapestry (AppFuse archetype for creating a modula r application with Hibernate, Spring and Tapestry 4) 10: internal -> maven-archetype-j2ee-simple (A simple J2EE Java application) 11: internal -> maven-archetype-marmalade-mojo (A Maven plugin development proje ct using marmalade) 12: internal -> maven-archetype-mojo (A Maven Java plugin development project) 13: internal -> maven-archetype-portlet (A simple portlet application) 14: internal -> maven-archetype-profiles () 15: internal -> maven-archetype-quickstart () 16: internal -> maven-archetype-site-simple (A simple site generation project) 17: internal -> maven-archetype-site (A more complex site project) 18: internal -> maven-archetype-webapp (A simple Java web application) 19: internal -> jini-service-archetype (Archetype for Jini service project creat ion) 20: internal -> softeu-archetype-seam (JSF+Facelets+Seam Archetype) 21: internal -> softeu-archetype-seam-simple (JSF+Facelets+Seam (no persistence) Archetype) 22: internal -> softeu-archetype-jsf (JSF+Facelets Archetype) 23: internal -> jpa-maven-archetype (JPA application) 24: internal -> spring-osgi-bundle-archetype (Spring-OSGi archetype) 25: internal -> confluence-plugin-archetype (Atlassian Confluence plugin archety pe) 26: internal -> jira-plugin-archetype (Atlassian JIRA plugin archetype) 27: internal -> maven-archetype-har (Hibernate Archive) 28: internal -> maven-archetype-sar (JBoss Service Archive) 29: internal -> wicket-archetype-quickstart (A simple Apache Wicket project) 30: internal -> scala-archetype-simple (A simple scala project) 31: internal -> lift-archetype-blank (A blank/empty liftweb project) 32: internal -> lift-archetype-basic (The basic (liftweb) project) 33: internal -> cocoon-22-archetype-block-plain ([http://cocoon.apache.org/2.2/m aven-plugins/]) 34: internal -> cocoon-22-archetype-block ([http://cocoon.apache.org/2.2/maven-p lugins/]) 35: internal -> cocoon-22-archetype-webapp ([http://cocoon.apache.org/2.2/maven- plugins/]) 36: internal -> myfaces-archetype-helloworld (A simple archetype using MyFaces) 37: internal -> myfaces-archetype-helloworld-facelets (A simple archetype using MyFaces and facelets) 38: internal -> myfaces-archetype-trinidad (A simple archetype using Myfaces and Trinidad) 39: internal -> myfaces-archetype-jsfcomponents (A simple archetype for create c ustom JSF components using MyFaces) 40: internal -> gmaven-archetype-basic (Groovy basic archetype) 41: internal -> gmaven-archetype-mojo (Groovy mojo archetype) Choose a number: (1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/17/18/19/20/21/22/23/2 4/25/26/27/28/29/30/31/32/33/34/35/36/37/38/39/40/41) 15: : 8 [INFO] ------------------------------------------------------------------------ [ERROR] BUILD FAILURE [INFO] ------------------------------------------------------------------------ [INFO] The defined artifact is not an archetype [INFO] ------------------------------------------------------------------------ [INFO] For more information, run Maven with the -e switch [INFO] ------------------------------------------------------------------------ [INFO] Total time: 3 seconds [INFO] Finished at: Sat Mar 27 08:22:38 IST 2010 [INFO] Final Memory: 8M/21M [INFO] ------------------------------------------------------------------------ C:\Users\Administrator> What can be the problem ?

    Read the article

  • How to help Open Source Softwares?

    - by Rajan Walia
    I know basic C++ like about classes and other basic stuff what are the things which i need to know so that i can understand the source code of some advance open source projects and be able to make one too. Like if i read the code of vlc or some other projects I can't understand many things moreover i am just a beginner have not worked on even multi file programs so please suggest which are the books and what are the basic projects from where i can start.

    Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >