Search Results

Search found 2018 results on 81 pages for 'bayesian networks'.

Page 48/81 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• How can I force certain applications to use specific network connections?

  - by snicker

  Let's say I have two active network connections that let me out to the internet. I want certain applications to only use Network Connection 1, while some others should use Network Connection 2. Is this possible in Windows XP? If so, how can it be done? The main reason I wish to do this is I want to use a tethered phone's network for certain applications and an ethernet connection for others. Certain ports and networks are blocked by the ethernet connection, whereas they are not on my tethered phones connection.

  Read the article

• Ubuntu in Virtualbox - web server very slow when using local IP address

  - by Lenny Marnham

  I'm using Ubuntu (Lucid Lynx) to learn Ruby On Rails. I'm running Ubuntu in VirtualBox (the host is Windows 7 Ultimate), using bridged networking. When I run my Rails app and point the browser at it using localhost:3000, the app responds immediately and my page is rendered in a second or two. However, if I use 10.0.0.5:3000 (where 10.0.0.5 is my IP address reported using ifconfig), the response from my rails app is incredibly slow - maybe 30 seconds or more for the server to respond and render the page. This happens in both Firefox and Chrome. Also, when I hit the Rails app from the host (to test it in IE), I get the same slooooooow response. Any ideas what might be going on? I've tried it with two different routers, and on two different networks (work and home) with the same result. Cheers all.

  Read the article

• Is 50% download speed on a wireless G network normal?

  - by Bartlomiej Skwira

  I have a wired connection of about 36Mb/s, but my wireless speed is max at about 18-19Mb/s. I have a WRT54G-TM (T-Mobile, 802.11G) router with DD-WRT firmware - I've upgraded it to latest build. Done some settings changes: changed channel - 13 wireless network mode - G-only ACK Timing - 0 Fragmentation Threshold and RTS Threshold - 2304 Basic Rate - All Signal/Noise ratio: -46/-94, signal quality ~50-60%. Is this normal with G networks? Edit: The AP is located about 2 meters from laptop, no walls or metal objects, but its next to a TV. I've done a channel scan (had problems locating it, go to "Status - Wireless - Site survey" - lame naming) and everybody else is on channels 1 and 6. Switched to channel 11 but it didn't help. As for trasmit power I got best results with default 71mw. The antenna might be a factor, I'm using the default 2 antennas.

  Read the article

• Mac OS X change IP configuration automatically by location (by Wifi network)?

  - by Seppo Sade

  Can Mac OS X be setup to automatically configure its Airport interface with a static IP address when connected to a Wifi network with a certain name, and on all other Wifi networks use DHCP? Currently I'm using the "Locations" feature of the "Network" section in System Preferences to manually switch between two IP address setups. I have a "my static IP" setup, and a default "DHCP" setup. However this requires entering System Preferences to change the Location drop-down each time when switching locations. Can this be automated? Preferably this would be done without third-party software.

  Read the article

• Computer connects to lan, but not the internet

  - by Jay

  I have a computer with Vista Home that can connect to the router, but it cannot get on the internet. I cannot ping google.com, the request times out. I've tried this on two separate networks and have no trouble with other computers connecting. I've renewed ipconfig, reset winsock, updated the wireless adapter, and the hosts file looks fine. I've tried disabling the firewall as well as a direct wired connection. I did a scan with Norton and it didn't find anything. Is there anything else I can try before resorting to a system restore? Update (Copied from Answer) Windows Update was able to find updates and install them (though, they could have already been downloaded previously). When I pinged Google by using their IP 66.102.9.103, it said it lost 25 percent of the packets. I successfully flushed the DNS but it didn't help. Also, I found safe mode with networking works fine.

  Read the article

• What is a Dynamic way to Connect to a Virtual Machine's Webserver from its Host Machine? [closed]

  - by Jonnybojangles

  As a Web-Developer what is the most efficient (automated) way to connect to a Virtual Machine (VM) running a development webserver from it’s Host Machine (the machine running the VM) when you do not have control over the networks (home, Startbucks, work, etc) you are connected to? Currently I start my VM (a VirtualBox VM running CentOS), run ifconfig to determine the VM’s current IP. I then take that IP and map it my Host machine’s host file so that I can access the VM’s webserver from the Host. I feel that this is not an efficient way to connect to my VM’s webserver because each time I connect to a new network (a few times a day) I need to repeat the IP look up and host file update, and sometimes restart the VM's network service.

  Read the article

• What is your approach to draw a representation of your network ?

  - by Kartoch

  Hello, I'm looking to the community to see how people are drawing their networks, i.e. using symbols to represent complex topology. You can have hardware approach, where every hardware unit are represented. You can also have "entity" approach, where each "service" is shown. Both are interesting but it is difficult to have both on the same schema (but this is needed, especially using virtualization environment). Furthermore, it is difficult to have complex informations on such representation. For instance security parameters (encrypted link, need for authentication) or specific details (protocol type, ports, encapsulation). So my question is: where your are drawing a representation of your network, what is your approach ? Are you using methodology and/or specific softwares ? What is your recommendations for information to put (or not) ? How to deal with the complexity when the network becomes large and/or you want to put a lot of information on it ? Examples and links to good references will be appreciated.

  Read the article

• WSUS Updates - Best Practice

  - by What'sTheStoryWishBone

  We have an isolated enviornment of a few hundred servers in which we use WSUS to push updates too. We have thousands of updates which to manage and push to devices testing along the way to ensure the update will not break anything. What are the best practices that you all follow in your enteprise networks to ensure an update does not go out to all the machines that will break something? We currently have ours broken into customized groups for each type of machine. There is one "Test Group" which has one PC of each type which we apply updates to for error checking. Is this a similar procedure others follow or is their an easier safer way to manage the thousands of WSUS updates?

  Read the article

• Intercepting LAN network traffic via WiFi

  - by user1613655

  Let's get straight to the point. This is my fictive network architecture: My question is: Would it be possible for Laptop B to intercept traffic sent and received by Laptop A? Please note that B only has WiFi access and no physical control over Router B. Furthermore, Router A and B create different wireless networks with different encryption keys. If both shared the same wireless network or Laptop B had LAN-access to Router B, the answer would be trivial, but I'm not sure how the answer turns out in this scenario :-/ Thanks for your valuable help!

  Read the article

• Solution to: Hotmail Senders receiving NDR : “550-Please turn on SMTP Authentication in your mail client…”

  - by Tony Yustein

  Original question is here original question I can not answer to that question because the system requires me to have 10 credits, very nice.... This error is based mostly on mobile devices, mostly on iPhones and mostly on mobile networks. This is how much I have narrowed it to. I believe: Hotmail checks where your are connecting from If it is a mobile network it requires additional security for sending messages but the default iPhone config does not have this option for hotmail if the user creates the hotmail account on the iPhone with SMTP AUTH enabled manually it might solve the situation Cheers, Tony

  Read the article

• two shops network

  - by edward

  okay so, I just opened up two shops in my hometown. The two stores is about 6 blocks apart, connecting them by wire is not really feasible in cost wise. What kind of network topology should I use for my small shops, there will be 5 computers, one is the sales computer ,another 4 as mentioned is the guest computer. I want the sales and guest computers network to be seperated. Both shops have same computers. The guest computers serves up simple website that has my shop catalog on it, I'm thinking of using a web server. So, how am i suppose to setup these networks, im planning to add in more computers in the future. Is it I need to station a single server at a shop, and all the computer connected to it? or is there any more effective methods? I'm no networking expert, would love to hear some advice.

  Read the article

• How can I tell if a host is bridged and acting as a router

  - by makerofthings7

  I would like to scan my DMZ for hosts that are bridged between subnets and have routing enabled. Since I have everything from VMWare servers, to load balancers on the DMZ I'm unsure if every host is configured correctly. What IP, ICMP, or SNMP (etc) tricks can I use to poll the hosts and determine if the host is acting as a router? I'm assuming this test would presume I know the target IP, but in a large network with many subnets, I'd have to test many different combinations of networks and see if I get success. Here is one example (ping): For each IP in the DMZ, arp for the host MAC Send a ICMP reply message to that host directed at an online host on each subnet I think that there is a more optimal way to get the information, namely from within ICMP/IP itself, but I'm not sure what low level bits to look for. I would also be interested if it's possible to determine the "router" status without knowing the subnets that the host may be connected to. This would be useful to know when improving our security posture.

  Read the article

• Memcached clustered alternative

  - by Johan Kooijman

  I'm looking to replace memcached. We have a LOT of traffic to our central memcached node which I'd like to split. There's only so much trunking networks I can do. My general idea is to install a memcached-type daemon on every webserver and have the daemons replicate set/delete/updates over all the daemons, so that each webserver connects to a socket or on localhost. All data should be available on all nodes. The alternatives: - repcached (max 2 masters) - redis (single master) - couchdb/mongodb/handlersocket - persistent data on disk, I'd like to remove the disk part to gain more performance. Any hints?

  Read the article

• ASUS WL-500gP v2 network between two local machines

  - by Epsiloncool

  I have two windows XP machines in my home networks, connected with ASUS WL-500gp V2 which also used as internet router. Problem is: while I have both computers normally goes to internet (used DHCP, static routes is ON, routing table is empty, operation mode is Home Gateway). I see both computers listed on the Network Neighborhood on 1st computer (wired to router), can enter to my own computer, but can not enter to other. I see only one computer (2nd) on the Network Neighborhood on 2nd computer (connected thru Wi-Fi), can enter to itself, getting error when trying to enter 1st computer address in address line (like \My1stComp). What is the problem? I totally crazy founding problem about 3 months.

  Read the article

• Windows 7 Mapped Network Drive Multiplying to Create Duplicates all the way to Z:

  - by bendiy

  A strange issue came in today from some users. At least two Windows 7 x64 boxes that have duplicate mappings of a network drive. The drive is not mapped with a log in script, but done manual through "Map Network Drive". Everything has been fine for months, but all of the sudden, Explorer looks like this: Files (\\fileServerPath) (S:) Files (\\fileServerPath) (T:) Files (\\fileServerPath) (U:) Files (\\fileServerPath) (V:) Files (\\otherServerPath) (W:) Files (\\fileServerPath) (X:) Files (\\fileServerPath) (Y:) Files (\\fileServerPath) (Z:) There are some other networks drives mixed in there that did not duplicate. The drive is normally mapped to S:\, but it decided to make its way to Z:. What is going on here? I've found this and will be trying soon: http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/b5647cc3-15d0-4776-bb00-a869bd8f930b

  Read the article

• What are the methods of separating network spaces in a LAN?

  - by dash17291

  Please detail me the methods. My thoughts: put the servers in separate (sub)networks the servers are forced to go through the firewall but no NAT is required assign more IP addresses to the internal interface of the server choosing gateway addresses from the clients and servers IP address ranges split DNS Netfilter/{iptables, ipset} could be heavily involved, I'm talking about Linux servers. See for example: Destination NAT Onto the Same Network from internal clients Please do not explain what is NAT or DNS. This is a theoretical question, but my poor English knowledge prevent me to describe it in a fancy fashion.

  Read the article

• Isolated Network Set-Up

  - by Isaac Kleinman

  I am looking to set up a small network for a client which would be isolated from his primary network. (I'm hoping to set-up the additional network as VMs on the primary network.) I've instructed the client to request a bunch of static ip addresses from his ISP, but I'm not sure how to proceed with setting this up. What hardware will I need and how do I go about the configuration? Heavy security is not my concern. All that's really required is that web requests from the two networks be presented to the outside world with different ip addresses.

  Read the article

• Prompt for credentials in a batch script

  - by Inteladu

  I am trying to perform a network copy of files via a batch script. However, as usual there are some networks where the 'copy' command fails saying 'Bad username or password'. And when I try using xcopy, it never works. I have also tried using, net use \\server\ password /user:domain\username net use \\server\ipc$ /user:domain\username password But none of these work. Any ideas on how I can accomplish this? I was also wondering if it is possible to prompt the ususal Windows login dialog for this...(just an idea) Any leads on this would be highly appreciated. Thanks & Regards, inteladu

  Read the article

• What is an Automated way to Access a Virtual Machine's Webserver from its Host Machine? [closed]

  - by Jonnybojangles

  As a Web-Developer what is the most efficient (automated) way to connect to a Virtual Machine (VM) running a development webserver from it’s Host Machine (the machine running the VM) when you do not have control over the networks (home, Startbucks, work, etc) you are connected to? Currently I start my VM (a VirtualBox VM running CentOS), run ifconfig to determine the VM’s current IP. I then take that IP and map it my Host machine’s host file so that I can access the VM’s webserver from the Host. I feel that this is not an efficient way to connect to my VM’s webserver because each time I connect to a new network (a few times a day) I need to repeat the IP look up and host file update, and sometimes restart the VM's network service.

  Read the article

• WIFI connection interfering with Windows Server 2003 Active Directory domain. (How to debug?)

  - by Vinko Vrsalovic

  RELATED: This question has led me to ask this one. I had to change our unnamed crappy ADSL router to a crappy Comtrend CT-5361 WiFi router, now every WiFi connection to the domain doesn't work correctly: Joining the domain is impossible (see related question) Logging into the domain takes ages Authentication usually fails Question: How to debug this and pinpoint the exact problem? I have no enough knowledge on either WiFi networks or on Active Directory to know which connections are made at which stages nor how to check what's happening at the wireless level to compare what should happen to what is happening. I'm looking for resources to learn what should be happening and tools to detect what is actually happening (I expect a sniffer should be enough, but if there are better, more specialized tools, that'd be great).

  Read the article

• Can I create an Infrastructure access point from built-in WiFi (as opposed to Ad-Hoc) on Windows XP?

  - by evilspoons

  I want to use my Windows XP laptop as an access point. What I am trying to achieve is possible under Windows 7 with a myriad of utilities, but the wireless driver stack was different before Windows 7 and those specific APIs don't exist on XP. The reason behind me wanting to do this is that I would like my Android phone to be able to connect via WiFi to a network that is only hard-wired (reverse tethering). Unfortunately, my Android device (Galaxy S Captivate) does not support ad-hoc networks without a serious amount of screwing around. Is it possible to create an "Infrastructure" network with my Dell Latitude D830's built-in WiFi - a "Dell Wireless 1395 WLAN Card", which I am assuming is probably rebadged Broadcom, or is there some fundamental difference between a wireless adapter and an access point that would prevent this?

  Read the article

• Port forwarding with router in bridged mode

  - by jipje44

  let say R1 and R2. R1 is in bridged mode and connected to R2. R2 is a dhcp server. To R2 is an internet camera connected. When i am on R2 and i do enter the ip of the camera then it will work without a problem. However i want to acces the camera from the outside. So in R2 i forwarded a port (done this one other networks without problems). However I can't connect from the outside. Can R1 blocking the port? I cant log in on R1 as long as it is in bridged mode.

  Read the article

• what route to add to windows so that..

  - by baobeiii

  what route to add to windows so that while using openvpn i have internet connectivity, but if openvpn tunnel collapses then my computer has no routes to use and so has no connectivity. My computer normally needs the default route 0.0.0.0 mask 0.0.0.0 192.168.1.254. I just need a route that only allowed traffic destined for the openvpn server ip. The traffic has to go through 192.168.1.254 however as that is my home networks internet gateway router thingy. Thanks.

  Read the article

• 1 Computer Pulls Wrong DNS Every Morning

  - by bradenkeith

  One of my users takes his laptop home, connects to his internal network fine. He brings it in every morning and since Monday - every morning it pulls the wrong DNS every time. It pulls 1 DNS: 192.168.1.1 which is the router. The DNS are external IPs. I have several users that take their laptops home and connect to other networks - what could cause this anomaly? He's booting up when he comes in the office and a simple ipconfig /release /renew fixes the issue.

  Read the article

• radvd won't accept non-/64 subnets

  - by Dolda2000

  I'm trying to set up radvd on a 6RD configuration (on Linux), where I have a /64 subnet, and I'm trying to use it on two distinct physical networks, so I'm trying to give each of them a /80 subnet. However, when I start radvd on these interfaces, it says this: radvd[3987]: prefix length should be 64 for int (int being the name of one of the interfaces.) I know that stateless autoconfiguration doesn't work on subnets that are larger than /64, like a /48 subnet, but AFAIK it's supposed to work on anything that is smaller than /64, so /80 shouldn't be a problem. The final effect, now, is that radvd simply advertises the wrong subnet prefix, effectively "removing" the first 16 bits of it. What is this? Am I all wrong on that, is radvd buggy, or is there some configuration option that I'm missing?

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >