Search Results

Search found 2301 results on 93 pages for 'cat'.

Page 48/93 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• Server not sending a SYN/ACK packet in response to a SYN packet

  - by jeff

  Using iptraf, tcpdump and wireshark I can see a SYN packet coming in but only the ACK FLAG is set in reply packet. I'm running Debian 5 with kernel 2.6.36 I've turned off window_scaling and tcp_timestamps, tcp_tw_recycle and tcp_tw_reuse: cat /etc/sysctl.conf net.ipv4.tcp_tw_recycle = 0 net.ipv4.tcp_tw_reuse = 0 net.ipv4.tcp_window_scaling = 0 net.ipv4.tcp_timestamps = 0 I've attached an image of the wireshark output. http://imgur.com/pECG0.png Output to netstat netstat -natu | grep '72.23.130.104' tcp 0 0 97.107.134.212:18000 72.23.130.104:42905 SYN_RECV I've been doing everything possible to find a solution and have yet to figure out the problem, so any help/suggestions are much appreciated. UPDATE 1: I've set tcp_syncookies = 0 and noticed I am now replying with 1 SYN+ACK for every 50 SYN requests. The host trying to connect is sending a SYN request about once every second. PCAP FILE

  Read the article

• Disable MOUSE wakeup when doing suspend on UBUNTU

  - by Shadyabhi

  When I do SUSPEND on ubuntu, in order to wake up, i can just move the mouse and the computer will wake up. But, I dont want that the computer is waked up when I move my mouse. How can I do that? My /proc/acpi/wakeup file:- shadyabhi@shadyabhi-desktop:~$ cat /proc/acpi/wakeup Device S-state Status Sysfs node SLPB S4 *enabled P32 S4 disabled pci:0000:00:1e.0 UAR1 S4 disabled pnp:00:09 ILAN S4 disabled pci:0000:00:19.0 PEGP S4 disabled PEX0 S4 disabled pci:0000:00:1c.0 PEX1 S4 disabled pci:0000:00:1c.1 PEX2 S4 disabled pci:0000:00:1c.2 PEX3 S4 disabled pci:0000:00:1c.3 PEX4 S4 disabled pci:0000:00:1c.4 PEX5 S4 disabled UHC1 S3 disabled pci:0000:00:1d.0 UHC2 S3 disabled pci:0000:00:1d.1 UHC3 S3 disabled pci:0000:00:1d.2 UHC4 S3 disabled EHCI S3 disabled pci:0000:00:1d.7 EHC2 S3 disabled pci:0000:00:1a.7 UH42 S3 disabled pci:0000:00:1a.0 UHC5 S3 disabled pci:0000:00:1a.1 UHC6 S3 disabled pci:0000:00:1a.2 AZAL S3 disabled pci:0000:00:1b.0 shadyabhi@shadyabhi-desktop:~$

  Read the article

• dmenu doesn't set environment variable as per my .bash_profile when running Emacs

  - by proofit404

  I have following ~/.bash_profile [[ -f ~/.bashrc ]] && . ~/.bashrc and ~/.bashrc ### Check for shell interactivity. if [[ $- != *i* ]] ; then return fi ### Nyan-cat prompt. PS1="\`if [ \$? = 0 ]; then echo \[\e[35m\]^_^\[\e[0m\]; else echo \[\e[31m\]O_O\[\e[0m\]; fi\` \$ " ### PATH export PATH=$PATH:$HOME/bin So when I run emacs from terminal all OK. When I start it with dmenu (getenv "PATH") and exec-path variable doesn't contain ~/bin directory. When I do it in xfce with xfrun4 command with same bash configuration all seams to work too. What is the problem with dmenu?

  Read the article

• why my server has a dir named "?"

  - by liuxingruo

  These are all the dirs in my server: ? bin boot dev etc home lib lost+found media media2 misc mnt net opt proc root sbin selinux srv sys tmp usr var why there is a "?" dir? Thanks very much. BTW: the touch command was found on my server(wiered). I list the bin dir: alsacard cp dd env hostname loadkeys more ps sed tcptraceroute alsaunmute cpio df ex igawk loadkeys.static mount pwd setfont traceroute6 arch csh dmesg false ipcalc logger mountpoint raw setserial tracert awk cut dnsdomainname fgrep kbd_mode login mv red sh view basename date doexec gawk keyctl ls netstat redhat_lsb_init sleep ypdomainname bash dbus-cleanup-sockets domainname gettext kill mail nice rm sort cat dbus-daemon dumpkeys grep ksh mailx nisdomainname rmdir stty chgrp dbus-monitor echo gtar ksh93 mkdir pgawk rpm su chmod dbus-send ed gunzip link mknod ping rvi sync chown dbus-uuidgen egrep gzip ln mktemp ping6 rview tar touch is missing, how can i get it back?

  Read the article

• How to set up Dell OMSA tools on Debian 6 (Squeeze) (PE2950)

  - by javano

  I assume I have set up them up incorrectly or am missing a library or dependency. When I log into the OMSA web interface I can't see anything Also, omreport tells me nothing; root@box:~# omreport storage controller No controllers found I assume these two will use the same source of information so what ever is wrong will fix them both. I set up OMSA as per these instructions. Also I have compiled MegaCLI (as this is a PowerEdge 2950 with a Perc 6/i controller) and I have used that to update the RAID firmware, so that works, but the Dell tools aren't. What have I missed during set up? root@kvm1:~# cat /etc/issue Debian GNU/Linux 6.0 \n \l root@kvm1:~# uname -a Linux kvm1.mivoice.cust.vostron.net 3.4.9 #1 SMP Wed Aug 22 19:08:46 BST 2012 x86_64 GNU/Linux

  Read the article

• CentOS: eth0 not starting on boot

  - by Cameron Aziz

  Whenever I reboot a CentOS Hyper-V VM, eth0 does not start automatically. All I need to do is perform ifup eth0 and all is fixed, but that isn't feasible from ssh! I am starting in runlevel 3. After I perform ifup eth0 on the console: [root@localhost ~]# ifconfig eth0 Link encap:Ethernet HWaddr 00:15:5D:2B:2B:07 inet addr:10.10.0.3 Bcast:10.10.0.255 Mask:255.255.255.0 inet6 addr: fe80::215:5dff:fe2b:2b07/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:34 errors:0 dropped:0 overruns:0 frame:0 TX packets:49 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4656 (4.5 KiB) TX bytes:6399 (6.2 KiB) Interrupt:9 Base address:0xa000 [root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none IPADDR=10.10.0.3 NETMASK=255.255.255.0 GATEWAY=10.10.0.1 USERCTL=no ONBOOT=yes [root@localhost ~]# chkconfig --list | grep network network 0:off 1:off 2:on 3:on 4:on 5:on 6:off

  Read the article

• Caching DNS server (bind9.2) CPU usage is so so so high.

  - by Gk

  Hi, I have a caching-only dns server which get ~3k queries per second. Here is specs: Xeon dual-core 2,8GHz 4GB of RAM Centos 5x (kernel 2.6.18-164.15.1.el5PAE) bind 9.4.2 rndc status: recursive clients: 666/4900/5000 About 300 new queries (not in cache) per second. Bind always uses 100% on one core on single-thread config. After I recompiled it to multi-thread, it uses nearly 200% on two core :( No iowait, only sys and user. I searched around but didn't see any info about how bind use CPU. Why does it become bottleneck? One more thing, here is RAM usage: cat /proc/meminfo MemTotal: 4147876 kB MemFree: 1863972 kB Buffers: 143632 kB Cached: 372792 kB SwapCached: 0 kB Active: 1916804 kB Inactive: 276056 kB I've set max-cache-size to 0 to make sure bind can use as much RAM as it want, but it always stop at ~2GB. Since every second we got not cached queries so theoretically RAM must be exhausted but it wasn't. Do you have any idea? TIA, -Gk

  Read the article

• Suppress EXT3-fs warning on mount

  - by STM

  I am familiar with output suppress on Unix machines, ie: cat /file/that/doesnt/exist > /dev/null 2>& However I can't seem to suppress the output of mount when an ext3 filesystem is mounted for the nth time, and it recommends an fsck. As it happens, fscks are run regularly by another machine, so these warning messages are needlessly interrupting the flow of output to my pretty bash script. These are the errors: # mount -t ext3 /dev/sda1 /mnt > /dev/null 2>& kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. Can anyone shed some light on this? I'm clearly blocking both fd's, but somehow output is still getting through. This is GNU Bash v2.05a

  Read the article

• Watch videos from a remote computer on the LAN on ubuntu

  - by tapan

  I want to watch the videos on a friends computer on the LAN without having to download it. Both of us are running ubuntu. Now one way is to ssh to his computer, cd to the directory where the video is and run the falling command: cat video.avi | ssh me@mycomputer mplayer - This works. However the problem is that I cannot seek inside the video as in can't go forward or backward in it. Is there a method by which I can watch the videos and also seek in them ? I can install any software on his comp and my comp to aid this process. I have root level access on both computers. Any suggestions ?

  Read the article

• How can I make my monitor run at it's native resolution under Kubuntu 9.10?

  - by Adam Matan

  Hi, I have installed Kubuntu 9.10 afresh on an HP desktop computer with a Samsung SyncMaster 2243 and Intel integrated graphics card. The screen resolution is fixed on 1280x1024 instead of the native 1680x1050, which makes my eyes bleed. $ lspci -k |grep "VGA" -A2 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) Kernel driver in use: i915 Kernel modules: i915 and my xorg.conf: /etc/X11$ cat xorg.conf Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection Any ideas how to make this driver work? I found no working solutions on Google searches. Thanks, Adam

  Read the article

• Why is the latency on one LVM volume consistently higher?

  - by David Schmitt

  I've got a server with LVM over RAID1. One of the volumes has a consistently higher IO latency (as measured by the diskstats_latency munin plugin) than the other volumes from the same group. As you can see, the dark orange /root volume has consistently high IO latency. Actually ten times the average latency of the physical devices. It also has the highest Min and Max values. My main concern are not the peaks, which occur under high load, but the constant load on (semi-)idle. The server is running Debian Squeeze with the VServer kernel and has four VServer containers and one KVM guest. I'm looking for ways to fix - or at least understand - this situation. Here're some parts of the system configuration: root@kvmhost2:~# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/system--host-root 19G 3.8G 14G 22% / tmpfs 16G 0 16G 0% /lib/init/rw udev 16G 224K 16G 1% /dev tmpfs 16G 0 16G 0% /dev/shm /dev/md0 942M 37M 858M 5% /boot /dev/mapper/system--host-isos 28G 19G 8.1G 70% /srv/isos /dev/mapper/system--host-vs_a 30G 23G 6.0G 79% /var/lib/vservers/a /dev/mapper/system--host-vs_b 5.0G 594M 4.1G 13% /var/lib/vservers/b /dev/mapper/system--host-vs_c 5.0G 555M 4.2G 12% /var/lib/vservers/c /dev/loop0 4.4G 4.4G 0 100% /media/debian-6.0.0-amd64-DVD-1 /dev/loop1 4.4G 4.4G 0 100% /media/debian-6.0.0-i386-DVD-1 /dev/mapper/system--host-vs_d 74G 55G 16G 78% /var/lib/vservers/d root@kvmhost2:~# cat /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 none /proc proc rw,nosuid,nodev,noexec,relatime 0 0 none /dev devtmpfs rw,relatime,size=16500836k,nr_inodes=4125209,mode=755 0 0 none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 /dev/mapper/system--host-root / ext3 rw,relatime,errors=remount-ro,data=ordered 0 0 tmpfs /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0 tmpfs /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0 fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0 /dev/md0 /boot ext3 rw,sync,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-isos /srv/isos ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_a /var/lib/vservers/a ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_b /var/lib/vservers/b ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_c /var/lib/vservers/c ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/loop0 /media/debian-6.0.0-amd64-DVD-1 iso9660 ro,relatime 0 0 /dev/loop1 /media/debian-6.0.0-i386-DVD-1 iso9660 ro,relatime 0 0 /dev/mapper/system--host-vs_d /var/lib/vservers/d ext3 rw,relatime,errors=continue,data=ordered 0 0 root@kvmhost2:~# cat /proc/mdstat Personalities : [raid1] md1 : active raid1 sda2[0] sdb2[1] 975779968 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 979840 blocks [2/2] [UU] unused devices: <none> root@kvmhost2:~# iostat -x Linux 2.6.32-5-vserver-amd64 (kvmhost2) 06/28/2012 _x86_64_ (8 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 3.09 0.14 2.92 1.51 0.00 92.35 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 23.25 161.12 7.46 37.90 855.27 1596.62 54.05 0.13 2.80 1.76 8.00 sdb 22.82 161.36 7.36 37.66 850.29 1596.62 54.35 0.54 12.01 1.80 8.09 md0 0.00 0.00 0.00 0.00 0.14 0.02 38.44 0.00 0.00 0.00 0.00 md1 0.00 0.00 53.55 198.16 768.01 1585.25 9.35 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.48 20.21 16.70 161.71 8.62 0.26 12.72 0.77 1.60 dm-1 0.00 0.00 3.62 10.03 28.94 80.21 8.00 0.19 13.68 1.59 2.17 dm-2 0.00 0.00 0.00 0.00 0.00 0.00 9.17 0.00 9.64 6.42 0.00 dm-3 0.00 0.00 6.73 0.41 53.87 3.28 8.00 0.02 3.44 0.12 0.09 dm-4 0.00 0.00 17.45 18.18 139.57 145.47 8.00 0.42 11.81 0.76 2.69 dm-5 0.00 0.00 2.50 46.38 120.50 371.07 10.06 0.69 14.20 0.46 2.26 dm-6 0.00 0.00 0.02 0.10 0.67 0.81 12.53 0.01 75.53 18.58 0.22 dm-7 0.00 0.00 0.00 0.00 0.00 0.00 7.99 0.00 11.24 9.45 0.00 dm-8 0.00 0.00 22.69 102.76 407.25 822.09 9.80 0.97 7.71 0.39 4.95 dm-9 0.00 0.00 0.06 0.08 0.50 0.62 8.00 0.07 481.23 11.72 0.16 root@kvmhost2:~# ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 59 May 11 11:19 control lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm1 -> ../dm-4 lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm2 -> ../dm-3 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-isos -> ../dm-2 lrwxrwxrwx 1 root root 7 May 11 11:19 system--host-root -> ../dm-0 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-swap -> ../dm-9 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_d -> ../dm-8 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_b -> ../dm-6 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_c -> ../dm-7 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_a -> ../dm-5 lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm3 -> ../dm-1 root@kvmhost2:~#

  Read the article

• Debian date jumping, causing complete lockup

  - by artfulrobot

  I have a Debian Squeeze VM that has suddenly chosen to jump it's date forwards just over a month, which seems to confuse it no end and cause it to require a hard reset (yikes!). There is nothing unusual in the logs, except that the datestamp suddenly jumps (today back to 2005). It's happened three times, so I don't think it's to do with the leap second issue as the last one of those was in July. When it happened once I spent ages checking stuff but could not find anything, decided to forget it. But three times is becoming an issue on a production server. Edits providing information requested in comments (thanks!): I do not have control over the hypervisor, it is a hired VM. # cat /sys/devices/system/clocksource/clocksource0/current_clocksource kvm-clock # ntpq -p remote refid st t when poll reach delay offset jitter ============================================================================== +grendel.exizten 130.149.17.8 2 u 29 64 77 14.811 1.778 1.744 *panoramix.linoc 193.67.79.202 2 u 32 64 77 19.729 -0.419 1.691 +robert.elnounch 213.251.128.249 2 u 27 64 77 17.762 0.600 1.722 -janetzki.eu 83.169.43.165 3 u 31 64 77 27.214 3.575 1.638

  Read the article

• Difference between tcp recv buffer and tcp receive window size?

  - by pradeepchhetri

  The command shows the tcp receive buffer size in bytes. $ cat /proc/sys/net/ipv4/tcp_rmem 4096 87380 4001344 where the three values signifies the min, default and max values respectively. Then I tried to find the tcp window size using tcpdump command. $ sudo tcpdump -n -i eth0 'tcp[tcpflags] & (tcp-syn|tcp-ack) == tcp-syn and port 80 and host google.com' tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 16:15:41.465037 IP 172.16.31.141.51614 > 74.125.236.73.80: Flags [S], seq 3661804272, win 14600, options [mss 1460,sackOK,TS val 4452053 ecr 0,nop,wscale 6], length 0 I got the window size to be 14600 which is 10 times the size of MSS. Can anyone please tell me the relationship between the two.

  Read the article

• Howto find internal IP server by external IP

  - by HWTech

  I've got 12 servers in datacenter, but can login by SSH into one of them (facade server), other servers available only from it. In hosts file we have ip list each of available servers. milkov@devel:/var/www/davel$ cat /etc/hosts 192.168.1.4 data1 192.168.1.7 data2 192.168.1.5 bground1 192.168.1.6 bground2 192.168.1.10 frontend1 192.168.1.11 frontend2 ... Also I've domain megaplan.tvigle.ru (IP 79.142.100.36). Question: How to know which one of servers serve this domain? How to find servers internal ip-address by external IP. PS: Sorry about my Eng. lng

  Read the article

• OOM-Killer called every now and then..

  - by SpyrosP

  Hello there, i have a dedicated server where i've installed apache2, as well as Rails Passenger. Although i have 2GBs of RAM and most times about 1,5GB is free, there are some random times when i lose ssh and generic connectivity because oom-killer is killing processes. I suppose there is a memory leak but i cannot find out where it comes from. oom-killer kills apache2, mysql, passenger, whatever. Yesterday, i did a "cat syslog | grep -c oom-killer" and got 57 occurences ! It seems that something seriously destroys the memory. Once i reboot, everything comes back to normal. I suspect that it can be related to Passenger, but i'm still trying to figure it out. Can you think of anything else, or do you have anything to suggest that will make the leak identification procedure easier ? (i was even thinking of writing a bash script, to be run with cron for like every 5 minutes).

  Read the article

• postfix "mail-pipe" alias shellscript creates permissionless files/dirs

  - by Gung Foo

  I am using an alias to a shellscript in postfix... After the script that is called by the shellscript creates a directory it has no permissions at all.. #!/bin/sh umask 002 cat | php /var/www/html/catchmymail rcvemail result is like this: d--------- 2 apache apache 4096 Sep 17 17:25 50 it works for files tho: -rw-rw---- 1 apache apache 5836288 Sep 18 11:21 test Not even setting umask 002 in the shellscript before it hands the mail on changes a thing Setting umask(0002) inside catchmymail has no effect either. Has anyone seen this behaviour before or an idea to save my day?!? This is extremely confusing and actually insane behaviour from what i understand about umask and file permissions.

  Read the article

• How to test KVM guest CPU maximum allocation limit?

  - by Ace

  Running Ubuntu 13.04 Host and vm Guest. Using virtio for hdd, nic. Max-allocaion CPU cores is 6, minimum is 2. Ive made a vm with virt-manager just to play with, and to test out kvm. Alright, I have a decent understand how the memory balloon driver works, but I still dont know how to test if the guest OS can utilize the max setting for cpu cores. From what i gather, the host will start one thread of qemu for each core allocated per vm. When i run htop inside the guest, it only shows two cores. (also here is the output of cat /proc/cpuinfo: https://gist.github.com/anonymous/93a361545130923537da ) How can I "force" the guest to allocate the other 4 cores so that it can show 6 cores in htop? Is there a way to do this?

  Read the article

• ubuntu input/output error

  - by rplevy

  I'm having a problem with Ubuntu that I'm finding hard to troubleshoot for reasons that will become clear: reboot -bash: /sbin/reboot: Input/output error dmesg -bash: /bin/dmesg: Input/output error ps -e ps: error while loading shared libraries: /lib/libproc-3.2.8.so: cannot read file data: Input/output error lsof -bash: /usr/bin/lsof: Input/output error fsck -bash: /sbin/fsck: Input/output error badblocks -bash: /sbin/badblocks: Input/output error So I can't see what is going on, and I can't remotely reboot. What can I do to get to the bottom of this? Interestingly: init 0 Segmentation fault I can cat /var/syslog but not /var/log/messages or several other important files. less and more don't work, neither do tail or head, etc.

  Read the article

• How to mount remote samba share from local host with multiple groups?

  - by Dragos

  I am using mount.cifs to mount a remote samba share (both client and server are Ubuntu server 8.04) like this: mount.cifs //sambaserver/samba /mountpath -o credentials=/path/.credentials,uid=someuser,gid=1000 $ cat .credentials username=user password=password I mounted a user from local system with username and password with mount.cifs but the problem is that the user is part of multiple groups on the remote system and with mount.cifs I can only specify one gid. Is there a way to specify all the gids that the remote user has? Is there a way to: Mount the remote samba with multiple groups on the local system? Browse the mount from 1) with the terminal since I want to pass some files from samba as arguments to local programs. Other solutions would be: nautilus sftp:// which runs through gvfs; but the newer gnome does not write to disk the ~/.gvfs anymore so I can't browse it in terminal. And the last solution would be NFS but that means that I have to synchronize the uids and gids on the local system with the ones from the server.

  Read the article

• My D-Link's Ethernet bridge downlink just got 10-30x slower?

  - by Jay Levitt

  TL;DR: I unplugged my network to move my desk, and now downloading via my DIR-655's Ethernet LAN bridge is 10-30x slower than the Ethernet switch it's plugged into. Background My network is SMC cable modem <-> Cisco firewall <-> Netgear switch <-> D-Link WiFi† | | | | SMC8014 ASA-5505 GS608v2 gigE DIR-655 rev A3 gigE †The DIR-655 is used as an access point, not a router (although what D-Link calls an access point, I'd call a bridge). The "WAN" port is unused; the Netgear connects to the built-in 4-port Ethernet LAN switch, inside the built- in router/firewall. Endpoints: MacBook Pro 17" mid-2010 iPhone 4S Fedora 12 Linux server running reasonably fast dual-Athlon X2, VelociRaptors, etc. All cables are <10 feet, mostly CAT-5e, some CAT-6, all premade. All WiFi endpoints are within three feet of the D-Link. Yesterday I unplugged and rearranged stuff, and now connecting via the D-Link - even through the wired switch, right next to the incoming network cable - is 30x slower than connecting directly to the Netgear switch, on both my MacBook and iPhone. How I'm measuring "slower" I'm mostly using http://speedtest.net, which of course only really measures broadband speeds. I've also installed http://www.speedtest.net/mini.php on my local server, but can't test the iPhone with that. Results Speedtest.net, closest server over Comcast business-class: CONFIG | PING (ms) | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> Netgear | 9 | 31.6 | 6.8 Mac <-> Ethernet <-> D-Link | 8 | 4.1 | 6.0 Mac <-> WiFi <-> D-Link | 9 | 1.4 | 2.9 iPhone <-> WiFi <-> D-Link | 67 | 0.4 | 1.6 Speedtest Mini on Linux PC: CONFIG | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> NetGear | 97.2 | 76.9 Mac <-> Ethernet <-> D-Link | 8.2 | 24.2 Mac <-> WiFi <-> D-Link | 1.0 | 8.6 Slow typing in SSH: Mac <-> Ethernet <-> Netgear <-> Linux PC: smooth Mac <-> Ethernet <-> D-Link <-> Linux PC: choppy Note that D-Link upload speeds are normal on broadband, slower locally (but I'd believe that's a D-Link limitation), and always faster than the downloads! Since ssh is choppy just with slow typing, I don't believe it's a throttling-type problem either; that's not a lot of bandwidth. What I've tried Swapping all "good" and "bad" cables Re-plugging "bad" cable from D-Link to Netgear and watching it be the "good" cable pulling cables away from power lines Verify that the Mac auto-detects the D-Link as gigE Try to verify the link speed of the D-Link <- Netgear connection, but the firmware doesn't report that Verify that the D-Link sees no TX/RX errors or collisions Use different Ethernet ports on both Netgear and D-Link Reset the D-Link to factory settings Upgrade the D-Link firmware from 1.21 to 1.35NA, 2010/11/12, the latest Reboot everything at least once On the Mac, disable Wi-Fi during the Ethernet tests, and unplug Ethernet during the Wi-Fi tests Using iStumbler, verify that the D-Link isn't picking overloaded Wi-Fi channels (usually just 1-5 neighbors on my and adjacent channels, average for my apt building) Verify that the only client connected to the Wi-Fi was the iPhone Verify that nothing was being chatty on my network according to the WISH log Enable and disable all sorts of D-Link settings, including forcing WAN auto-detect to gigE So. I don't mind buying a new access point—I wouldn't mind having a dual-link network—but as a guy who's been networking since gated v4 was a drastic rewrite, and who often used physical sniffers in the days before Wireshark, I'm baffled. I hate being baffled. What could I possibly have changed that would result in this? How can I measure it? All I can think of is a static zap—thick carpet, socks, HVAC—but I didn't feel one, and does that really happen anymore? Can I test if it's Ethernet vs. TCP layer slowness? I'm not familiar with modern network utilities; it's hard to Google without hitting "Q: Why is my network slow? A: Is your microwave on?" If I don't get an answer here, will someone big and powerful help me migrate it to serverfault without getting screamed back here? In the words of Inigo Montoya, "I must know." Don't get all Dread Pirate Roberts on me.

  Read the article

• How do I unmount a tmpfs that is missing from /etc/mtab?

  - by vrinek

  I have the following line in /etc/fstab: none /home/hydra/tmp tmpfs user,noauto,size=1000M,uid=1001,gid=1001 0 0 I can do mount ~/tmp as user hydra and it gets mounted ok. The only problem is that even thought it gets added to /proc/mounts, it does not get added to /etc/mtab. When I try a umount ~/tmp (again as hydra) it complains: umount: /home/hydra/tmp is not mounted (according to mtab) And when I try -f or -n, it complains that I am not root. Some more info on the system that manifests this problem: On sudo umount /home/hydra/tmp, the fs gets unmounted (I think I needed to used -f too) Debian version is testing mount --version - mount from util-linux 2.19.1 (with libblkid and selinux support) ls -l /etc/mtab - -rw-r--r-- 1 root root 921 Nov 14 09:08 /etc/mtab cat /proc/mounts | grep rootfs - rootfs / rootfs rw 0 0 /home, /home/hydra nor /home/hydra/tmp are symbolic links

  Read the article

• Linux says a kernel module has an unknown symbol, but another loaded module provides it.

  - by raldi

  I'm trying to install a driver for a USB DAQ box, which annoyingly, I have to compile myself. I believe I've succeeded -- I have two .ko files: -rw-r--r-- 1 root root 45271 2010-03-18 21:24 advdrv_core.ko -rw-r--r-- 1 root root 24312 2010-03-18 21:24 usb4761.ko I was able to run insmod on the first without incident, but when I try on the second, I get a flood of messages: kernel: [686782.106547] usb4761: no symbol version for adv_process_info_check_event kernel: [686782.106555] usb4761: Unknown symbol adv_process_info_check_event kernel: [686782.106691] usb4761: no symbol version for advdrv_unregister_driver kernel: [686782.106695] usb4761: Unknown symbol advdrv_unregister_driver However, advdrv_core.ko provides these symbols. My kernel sure seems to have them in memory: # cat /proc/kallsyms | grep advdrv_unregister_driver f8d88504 r __ksymtab_advdrv_unregister_driver [advdrv_core] f8d888d2 r __kstrtab_advdrv_unregister_driver [advdrv_core] f8d885a4 r __kcrctab_advdrv_unregister_driver [advdrv_core] 086eb8fb a __crc_advdrv_unregister_driver [advdrv_core] f8d86e90 t advdrv_unregister_driver [advdrv_core] Why does my insmod claim they're unknown symbols?

  Read the article

• terminal tools and logs for debugging TCP issues

  - by kellogs

  I have a server which I am testing for functionality (not load, not stress) with tsung. 50 users / second, 100 total users. Judging from tsung (tsung is the testing framework) graphs, there TCP connections (red line) drops to 0 while the commenced user sessions (green line) does not. Server logs show nothing to be gripping onto, so I am speculating some kind of TCP issue. Should this be the case ? Where would I look further on the server, any logs / tools to be looking at ? Only SSH available, no GUI. > root@XMPP:~# cat /etc/lsb-release > DISTRIB_ID=Ubuntu > DISTRIB_RELEASE=11.10 > DISTRIB_CODENAME=oneiric > DISTRIB_DESCRIPTION="Ubuntu 11.10" Thank you

  Read the article

• Beam display from any computer to shared display

  - by rcourtna

  There are probably a lot of ways to skin this cat. Looking for the cleanest. In our office, we have a large display in a common area. We want to allow any computer in our office (mac, linux, windows) to output its video on the large display. Since some of the computers in the office are stationary, and it's not practical to run video cables everywhere, it would be preferable to make this all happen through the network. It is also possible for us to connect a dedicated (& networked) PC to the large display. How can I do this?

  Read the article

• Munin "Available entropy" when using address space layout randomization

  - by clawspoon

  Having just configured munin for statistics logging on my gentoo server (hardened profile), I am noticing that my "Available entropy" is consitently in the 200-300 range. This seems way to low, so I checked it manually using the command $ cat /proc/sys/kernel/random/entropy_avail 3544 Odd. Consistently very low values in Munin and practically filled up when checking manually. After thinking about the problem for a while I came to the conclusion that the problem is probably that I'm using Adress Space Layout Randomization which is using the entropy when running commands/programs. Since Munin runs a whole slew of programs all the entropy is used up, and Munin then measures how much entropy there is, resulting in the low values. Does anyone have any experience with this? How can this be avoided?

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >