Search Results

Search found 37045 results on 1482 pages for 'hard drive image'.

Page 48/1482 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

  • Home server hard drive: 186k start-stop cycles in 325 days?

    - by j-g-faustus
    I set up a home server about a year ago, using Ubuntu server (10.04 LTS at the moment), four disks in RAID 5 for storage (WD Green 1.5 TB) and a laptop drive for the OS. Today the output of smartctl, a command line utility for checking the SMART attributes of a hard drive, tells me that the primary OS drive has had no less than 186,000 start-stop cycles in 325 days and may be nearing the end of its lifespan. The smartctl output is in "normalized values", in this case a number between 200 and 000, where 200 is "brand new" and 000 means "worn out". My disk gets 001. So I wonder what happened: 186k start/stop cycles in 7820 hours is about one start/stop per 2.5 minutes around the clock. This seems somewhat excessive for a computer that sees actual use once or twice per day. (The RAID disks are normal, averaging to one start/stop per day, as expected.) Does anyone have similar experiences, or pointers to what might be the issue here? Specifically I'd like to know Why the massive start/stop count? Do I have some sort of configuration issue? Could there be a background service that is causing trouble? Could having a laptop disk as the OS drive be part of the problem? Can anyone confirm or deny this? Here is the /etc/hdparm.conf configuration /dev/sda { apm = 127 spindown_time = 120 } and the most relevant parts of smartctl --attributes /dev/sda: smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 001 001 000 Old_age Always - 185875 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7820 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 109 193 Load_Cycle_Count 0x0032 118 118 000 Old_age Always - 246833 194 Temperature_Celsius 0x0022 107 098 000 Old_age Always - 36 As I generally prefer my drives to last more than a year, any advice is appreciated.

    Read the article

  • Should I partition a 1TB Hard Disk whose primary use is media storage?

    - by Senthil
    I am going to get a 1TB hard disk. I will be storing 1080p or 720p movies, high-bitrate music and pictures in it. I use my PC 90% of the time only to play/listen/see those. I am running out of space in my current HD so I am getting another one. My specs are 2.7GHz Dual Core, 512MB GeForce 9400GT, 2GB DDR2 RAM and all the proper matroska codecs/players. I guess that is enough to play 1080p movies withough a glitch, given an ideal hard disk. I've read about proper partitioning giving performance improvement etc.. I don't want my hard disk to be the bottleneck. Can someone tell me whether I should partition my 1TB hard disk into many drives? If I should, what is the ideal size of each partition? Smooth playing of movies is very important to me. Once I start filling up the disk, there is no turning back. So I want to get it right before I start. Thanks.

    Read the article

  • What are the replacement options for an IDE hard disk for a DOS based system?

    - by dummzeuch
    I have got a few "embedded" systems running MSDOS 6.2 which boot from and store data to IDE hard disks. Since these drives are nearing their end of life, the question arises how we can replace them. The requirements are: DOS must be able to install and boot from these drives. They must be able to sustain heavy (mostly) write access. If possible, they should be able to survive moderate vibrations (not too bad since the current hard disks have survived several years of that) I considered the following options so far: other ide hard drives: Unfortunately modern IDE drives are too large so DOS cannot boot from them even if I create small partitions. Older IDE drives are just that: old, so they are probably not the most reliable ones any more. SSDs: There are a few SSDs with IDE interface available. I have not yet tried them. Does anybody have any experience with them? They look like the ideal replacement provided that DOS can boot from them and that writing speed does not deteriorate too much (the old hard disks are no race cars either). Compact Flash: There are adapters for using CF with IDE controllers and they work fine. DOS can boot from them and they have no problems at all with vibrations. What I am not sure about is their durability. DOS uses FAT so some very few sectors are written every time the medium is being written to. IDE to SATA converters: I have no idea whether they are any good. Has anybody tried them? It might be an option to use one of these to connect an SATA SSD to the system. Are there any alternatives that I have missed? (We are working on replacing these systems, but it will still take a few years.)

    Read the article

  • Is there a way to do a sector level copy/clone from one hard drive to another?

    - by irrational John
    Without going into distracting details, I'm attempting to duplicate the contents of the 500GB drive in my MacBook to another 500GB drive. But this is turning out to be an unexpected hassle because the drive contains both the OS X partition and an NTFS partition with Win 7 via Apple's Boot Camp. With the exception of Clonezilla, the tools I have looked at so far all have some limitation. The Mac tools don't want to deal with the NTFS partition. The Windows tools are totally clueless about either the HFS+ partition and/or the hybrid MBR/GPT Boot Camp partitioning. Clonezilla looked like it would do what I want but apparently I can't figure out how to use it. After doing what I thought was a sector to sector copy I found that only the NTFS partition had been migrated. The others were apparently empty. (And frankly, I'm not positive Clonezilla migrated the partition table correctly either). Note: It takes over 2 hours using SATA to read/write all sectors with these drives. So I'm not up for using trial & error to narrow in on the right combination of Clonezilla options to use. I'm beginning to think that maybe the answer is to boot Linux (probably Ubuntu) and then use some ancient BSD command. Trouble is I don't know what command (or parameters to use) in order to do a sector level copy from one drive to another. As far as I know the drives have the same number of sectors so this should be trivial. Sigh.

    Read the article

  • Windows 7 does not detect my new hard drive?

    - by jasondavis
    I just built a really nice new PC. Some specs... Intel i7-930 CPU ASRock Extreme X58 motherboard with sata 3 and USB 3.0 12gb of G-Skill DDR3 RAM 80gb Intel G2 Solid state drive for Windows 7 and other programs to run on Windows 7 Pro 64bit OS 2 1gb grapghic cards for 4 monitor support Thats the main components. Well today my new 1tb western digital hard drive came which I plan to use for data to preserve the life of my SSD (hopefully). I hooked up it's sata power input and then hooked up it's sata data cable to a sata 2 port on my motherboard, I boot windows 7 and go into my computer and the drive is not showing up with my other drives. I then re-boot again and check again, no luck. I then shut down the PC and open the case back up, I then check my connections and they all look good. I then boot up and I can see the new HD is on and spinning. I then go into my BIOS settings to see if it registers there and it DOES! It shows I have a WD 1tb hard drvie on sata 2 port 6. So I am at a loss of why it is not showing up as an option in windows? Windows acts as if the drive is not there. Please help

    Read the article

  • Connect USB hard drive to wireless router on RJ45 port? Possible?

    - by lawphotog
    just a quick story behind. I was trying to set up wireless networked hard drive at home. My wireless router doesn't take USB. I am considering few options. First i was considering to get something like WD My Cloud. My router is an old one provided by service provider. It only has 10/100 Ethernet. WD My Cloud has Gigabit interface. So unless i changed a new router, data transfer will be slow. So upgrading the router is a must if i want fast transfer speed. Plus I already own an external hard drive with USB 3.0 interface. So if I get a router like Netgear D6300, i can get a decent speed wireless shared drive at home. And i can use my existing HDD instead of WD My Cloud. But the router isn't cheap so I am saving up for that. In the meantime I found out the existence of USB to RJ45 adaptor. I read the reviews and some say it works for them and for some don't. They didn't really say what they were trying to do so I'm confused. So if i bought an adaptor like this, can i connect my existing HDD (USB) with my existing router (RJ45) and use it as a shared drive for data transfer? I know it will be slow as the adaptor will only have USB 2.0 and 10/100 for Ethernet. But it's fine as it's for temporary until i got my new router.

    Read the article

  • on hover overlay image in CSS

    - by Juventus
    I need a div with picture bg to overlay an image (with some amount transparency) when hovered on. I need to be able to have one transparent overlay that can be used and reused throughout the site on any image. My first attempt was round-about to say the least. Because I found out you cannot roll-over an invisible div I devised a sandwhich system in which the original image is the first layer, the overlay is the second layer, and the original image is third layer again. This way, when you roll-over, the original image disappears revealing the overlay image over the original image: http://www.nightlylabs.com/uploads/test.html So it works. Kinda. Because of you cannot interact with an visibility:invisible element (why?!) the roll-over flickers unless you rest the cursor on it. Any help? This method is bad so if anyone has a better one please comment.

    Read the article

  • How to Clear an image control in WPF (C#)

    - by antongladchenko
    I have an image control with a source image located in my c drive. I get a message that the image is being used by another process whenever I try to delete the original image to change it with another one dynamically. How do I release the image from the image control to be able to delete it. I tried this variants: string path = ((BitmapImage)img.Source).UriSource.LocalPath; img.SetValue(System.Windows.Controls.Image.SourceProperty, null); File.Delete(path); And: string path = ((BitmapImage)img.Source).UriSource.LocalPath; img.Source = null; File.Delete(path) But it's not work...

    Read the article

  • image loading information with jquery

    - by Pradyut Bhattacharya
    Hi I have a page which has a img holder with the html: - <img src="someimage.jpeg" alt="image" class="show_image"/> Now i m updating the image with jquery using the code... $('.show_image').attr('src', 'anotherimage.jpeg'); Now its working fine but i want to show the users the image is being loaded and may wait as the image size may be huge... Is there any method in jquery to get the information of percent loaded(bytes read/remaining) or if the image load is complete... Also how can i place a div over the image placeholder such that the div can fade the image(opacity:0.8) and add some text over the div as loading or something thanks

    Read the article

  • Help Reading Binary Image Data from SQL Server into PHP

    - by Joe Majewski
    I cannot seem to figure out a way to read binary data from SQL server into PHP. I am working on a project where I need to be able to store the image directly in the SQL table, not on the file system. Currently, I have been using a query like this one: INSERT INTO myTable(Document) SELECT * FROM OPENROWSET(BULK N'C:\image.jpg', SINGLE_BLOB) as BLAH This works fine to actually insert the image into the table, but I haven't yet figured a way to retrieve it and get my image back. I am doing this with PHP, and ultimately will have to make a stored procedure out of it, but can anyone enlighten me on a way to get that binary data (varbinary(MAX)) and generate an image on the fly. I expected it to be simple to use a SELECT statement and add a content-type to the headers that indicated it was an image, but it's simply not working. Instead, the page will just display the name of the file, which I have encountered in the past and understand it to be an error with the image data.

    Read the article

  • An image from byte to optimized web page presentation

    - by blgnklc
    I get the data of the stored image on database as byte[] array; then I convert it to System.Drawing.Image like the code shown below; public System.Drawing.Image CreateImage(byte[] bytes) { System.IO.MemoryStream memoryStream = new System.IO.MemoryStream(bytes); System.Drawing.Image image = System.Drawing.Image.FromStream(memoryStream); return image; } (*) On the other hand I am planning to show a list of images on asp.net pages as the client scrolls downs the page. The more user gets down and down on the page he/she does see the more photos. So it means fast page loads and rich user experience. (you may see what I mean on www.mashable.com, just take care the new loads of the photos as you scroll down.) Moreover, the returned imgae object from the method above, how can i show it in a loop dynamically using the (*) conditions above. Regards bk

    Read the article

  • Trouble adding Image to a JPanel

    - by user1276078
    I'm making a video game, and I need to add an image to a JPanel and then add that JPanel to a JFrame. All of the tutorials I've seen say to add it to a JLabel, but the image needs to be able to move around. Unless you can move a JLabel around, I can't do that. How would I be able to add an Image directly to a JPanel. This is what I have so far, but it is just like it was on a JApplet class Penguin extends JPanel { public Image image; public void paintComponent( Graphics g ) { image = getImage( getDocumentBase(), "Penguins.jpg" ); g.drawImage( image, 0, 0, this ); } }

    Read the article

  • Discovered: Run A Video In An Image

    - by Moon .
    okay i have found the way to run a video in a image.... the procedure as given below 1 - Run a video in Windows Media Player 2 - While the video running, Press Print Screen 3 - Paste it in MS Paint 4 - Save the image in JPEG or BMP format 5 - Run any video in Windows Media Player again 6 - Now open that image, in Windows Page\Fax Viewer or ACDsee etc. 7 - at this time the win. media player is playing and the image is open 8- Switch to image (focus on image) and you will see the currently running video in the image can anybody with extensive knowledge of windows tell me why does this happen. Well this doesn't work in all versions of windows and media players. i tried this on the follwing setup Windows Media Player 10 Windows XP 2006 SP2

    Read the article

  • How do I 'see' an external USB drive connected directly to my Broadband Router?

    - by The Cougar Kid
    This is a very frustrating problem! I have a small home network with several dual boot Ubuntu / Windows computers. I have recently upgraded my Broadband connection and the new router permits the direct attachment of an external USB drive which can back up all of the household's computers. There are no problems when booted under Windows, and there were no problems with older versions of UBUNTU, but since upgrading to 11.10 I can no longer "see" the drive. I used to find it via Network / Windows Network / Home / name of Router, but under 11.10 the same method yields an error message Unable to mount location Failed to retrieve share list from server. Can anyone help please? Starting Nmap 5.21 ( http://nmap.org ) at 2011-12-21 10:06 GMT Stats: 0:02:02 elapsed; 0 hosts completed (1 up), 1 undergoing Service Scan Service scan Timing: About 50.00% done; ETC: 10:10 (0:01:56 remaining) Nmap scan report for 192.168.1.254 Host is up (0.0097s latency). Not shown: 998 filtered ports PORT STATE SERVICE VERSION 554/tcp open rtsp? 7070/tcp open realserver? Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 152.38 seconds sudo tail -n 30 /var/log/syslog [sudo] password for alaric: Dec 21 10:05:42 UPSTAIRS2U wpa_supplicant[882]: WPA: Group rekeying completed with 00:01:3b:8b:63:1a [GTK=TKIP]

    Read the article

  • Delay the display of image loaded using jquery + ajax

    - by niczoom
    I am using the following code : $.ajax({ url: "pgiproxy.php", data: ({ data : $("#formdata").serialize(), mode : "graph"}), success: function(result){ var temp = $('<div/>').html(result); var val = temp.find('center').html(); $('#BFX').html(val); }, error: function(){ $("#error").html("ERROR !!!"); } }); The 'result' from the ajax call to 'pgiproxy.php' is a whole web page (returned as a string), this is then converted to a jQuery object and stored in 'var'. I then extract the data I need (a .gif image) using .find() which is stored in 'val'. This image is then inserted into a #BFX div for display. My problem is every successive time I click my button to update this image it shows the image loading from top to bottom as it is reading it in from the web. Is there a way to only display this image once it has fully loaded so the user doesnt see the image loading and only sees the image change instantly.

    Read the article

  • BlackBerry - Cropping image

    - by rupesh
    Hi all i want to crop a part of Image ,for that i am using following code: int x=20; int y=50; int [] rgbdata=new int[(0+width-x+height-y)* (image.getWidth())]; image.getARGB(rgbdata, 0, image.getWidth(), x, y, width, height); cropedImage=new Bitmap(image.getWidth(),image.getWidth()); cropedImage.setARGB(rgbdata, 0,image.getWidth(), 80,80, width, height); x an y are the position from where the cropping will be done in the rectangular form. but it is not working can any one help me out please. any sample code will work for me. its urgent. thanks in advance

    Read the article

  • Light effect with image magick

    - by GuilhermeA
    Hello, I'm using ImageMagick to resize an image to a smaller size gif. In this process I'm trying to give the image a light effect, not a side-light, just like a shiny look all over. Not a good comparison but for a better understanding think of an image seen in a old screen or an image seen in glossy monitor - I'm trying to enhance the image the closest to this point. An important point is that I can't make a image-to-image treatment, it must be something that I can use in all the images. I know ImageMagick is a powerful tool, and can certainly do something for my images! Many thanks!

    Read the article

  • python convert 12 bit image encoded in a string to 8 bit png

    - by ks
    I have a string that is read from a usb apogee camera that is a 12-bit grayscale image with the 12-bits each occupying the lowest 12 bits of 16-bits words. I want to create a 8-bit png from this string by ignoring the lowest 4 bits. I can convert it to a 16-bit image where the highest 4 bits are always zero using PIL with import Image imageStr is the image string imageSize is the image size img=Image.fromstring("I", imageSize, imageStr, "raw", "I;16", 0,1) img.save("MyImage.png", "PNG") Anyway I can do something similar to create a 8-bit image without completely unpacking the string doing arithmetic and making a new string?

    Read the article

  • While running a batch file in Windows 7 with Admin rights from a thumb drive, how can I get the file path back to the thumb drive?

    - by Jeremy DeStefano
    I have a piece of software that is being distributed to several departments for installation onto Windows 7 laptops. They install software from the thumb drive and then they have to run a script to properly configure the software. Because the script is changing registry files and program files, it requires Admin rights. When running as Admin, it drops into the System32 folder and I no longer have an easy scriptable way to access files that need to be copied from the thumb drive, simply because I don't know for sure what drive letter its going to use on the various machines. Previous installations were on Windows XP and the command window file path stayed within the script folder. I've found similar questions here and I have already tried Relative Paths, but it can't seem to find the proper folder on the thumb drive or I can't seem to find the proper way to format it.

    Read the article

  • Ubuntu apt-get install linux-image

    - by Karl Kloppenborg
    I'd like someone to enlighten me as to what exactly goes on with aptitude when I want a kernel. As we all know, there's pretty much the following kernel option: linux-image-generic linux-image-server linux-image-virtual This morning I did an install and it had linux-image-generic on it, so I ran the following: apt-get -y remove linux-image-* This removed all my kernels as expected, I followed suit with running: apt-get install linux-image-virtual Says I've installed linux-image-server!? Am I missing something here, because I checked twice and it did it twice, however if I manually select a kernel (in my instance I used: linux-image-2.6.35-30-virtual) it will install linux-image-virtual. This seems rather strange to me? Details: Running Ubuntu 9.10 Am I missing something? :)

    Read the article

  • Mac OS X Lion (10.7) Drive Encryption

    - by Skoota
    My iMac has two drives (a 256 GB solid-state drive, and regular 2 TB hard drive). The Mac OS X Lion system is installed on the solid-state drive and, like many other users, I have moved my user profile folder onto the secondary 2 TB drive. However, as you may be aware, FileVault 2 on Mac OS X Lion (10.7) only encrypts the system drive. This leaves my data drive (containing my user profile folder, with all of my data) unencrypted. I am aware that work arounds for this issue exist (such as https://github.com/jridgewell/Unlock) but I am not happy with the results since they involve decrypting the data drive on startup using a LaunchDaemon (before any users have logged into the computer) essentially meaning that any user who logs onto the computer will see the unencrypted drive. I would like a method which will only unencrypted the data when an authorised user logs into the computer. As such, is there a way to do one of the following? Encrypt the entire data drive and only decrypt the drive when an authorised user logs into the computer. This would be equivalent behaviour to the Lion FileVault 2 feature, but on a secondary drive rather than the system drive. Encrypt only the user profile folder on the data drive, and only decrypt the folder when the user logs into the computer. This would be equivalent to the behaviour of FileVault 1 on previous versions of Mac OS X? I am happy to pay for a commercial third-party product that provides the required feature(s), but I have not yet been able to find one. Thanks in advance for any assistance.

    Read the article

  • Silverlight Image Loading Question

    - by Matt
    I'm playing around with Silverlight Images and a listbox. Here's the scenario. Using WCF I grab some images out of my database and, using a custom class, add items to a listbox. It's working great right now. The images load and appear in the listbox, just like I want them to. I want to refine and improve my control just a little more so here's what I've done. <ListBox x:Name="lbMedia" Background="Transparent" ScrollViewer.HorizontalScrollBarVisibility="Disabled" ScrollViewer.VerticalScrollBarVisibility="Auto"> <ItemsControl.ItemsPanel> <ItemsPanelTemplate> <c:WrapPanel></c:WrapPanel> </ItemsPanelTemplate> </ItemsControl.ItemsPanel> <ItemsControl.ItemTemplate> <DataTemplate> <im:MediaManagerItem></im:MediaManagerItem> </DataTemplate> </ItemsControl.ItemTemplate> </ListBox> Just a simple listbox. The datatemplate is a custom control and literally it contains a contentpresenter, nothing more. Now the class that I use as the ItemSource has a Source property. Here's what it looks like. private UIElement _LoadingSource; private UIElement _Source; public UIElement Source { get { if( _Source == null ) { LoadMedia(); return new LoadingElement(); } return _Source; } set { if( !( value is Image ) && !( value is MediaElement ) ) throw new Exception( "Media Source must be an Image or MediaElement" ); _Source = value; NotifyPropertyChanged( "Source" ); } } Essentially, on the get I check if the image/video has been loaded from the server. If it hasn't I return a loading control, then I proceed to load my image. Here's the code for my LoadMedia method. private void LoadMedia() { if( _Media != null && _Media.MediaId > 0 ) { //load the media BackgroundWorker mediaLoader = new BackgroundWorker(); mediaLoader.DoWork += mediaLoader_DoWork; mediaLoader.RunWorkerCompleted += mediaLoader_RunWorkerCompleted; mediaLoader.RunWorkerAsync(); } } void mediaLoader_RunWorkerCompleted( object sender, RunWorkerCompletedEventArgs e ) { if(_LoadingSource != null) Source = _LoadingSource; } void mediaLoader_DoWork( object sender, DoWorkEventArgs e ) { string url = App.siteUrl + "download.ashx?MediaId=" + _Media.MediaId; SmartDispatcher.BeginInvoke( () => { Image img = new Image(); img.Source = new BitmapImage( new Uri( url, UriKind.Absolute ) ); _LoadingSource = img; } ); } So as the code goes, I create a new image element, and set the Uri. The images that I'm downloading take about 2-5 seconds to download. Now for the problem / fine tuning. Right now my code will check if the source is null and if it is, return a loading element, and run the background worker to get the image. Once the background worker finishes, set the source to the new downloaded image. I want to be able to set the Source property AFTER the image has fully downloaded. Right now my loading element appears for a brief second, then there's nothing for 2-5 seconds until the image finishes downloading. I want the loading elements to stick around until the image is completely ready but I'm having troubles doing this. I've tried adding a a listener to the ImageOpened event and update the Source property then, but it doesn't work. Thanks in advance.

    Read the article

  • Scaling an image using the mouse in C#

    - by Gaax
    Hey guys... I'm trying to use the position of the mouse to calculate the scaling factor for scaling an image. Basically, the further you get away from the center of the image, the bigger it gets; and the closer to the center you get, the smaller it gets. I have some code so far but it's acting really strange and I have absolutely no more ideas. First I'll let you know, one thing I was trying to do is average out 5 distances to get a more smooth resize animation. Here's my code: private void pictureBoxScale_MouseMove(object sender, MouseEventArgs e) { if (rotateScaleMode && isDraggingToScale) { // For Scaling int sourceWidth = pictureBox1.Image.Width; int sourceHeight = pictureBox1.Image.Height; float dCurrCent = 0; // distance between the current mouse pos and the center of the image float dPrevCent = 0; // distance between the previous mouse pos and the center of the image System.Drawing.Point imgCenter = new System.Drawing.Point(); imgCenter.X = pictureBox1.Location.X + (sourceWidth / 2); imgCenter.Y = pictureBox1.Location.Y + (sourceHeight / 2); // Calculating the distance between the current mouse location and the center of the image dCurrCent = (float)Math.Sqrt(Math.Pow(e.X - imgCenter.X, 2) + Math.Pow(e.Y - imgCenter.Y, 2)); // Calculating the distance between the previous mouse location and the center of the image dPrevCent = (float)Math.Sqrt(Math.Pow(prevMouseLoc.X - imgCenter.X, 2) + Math.Pow(prevMouseLoc.Y - imgCenter.Y, 2)); if (smoothScaleCount < 5) { dCurrCentSmooth[smoothScaleCount] = dCurrCent; dPrevCentSmooth[smoothScaleCount] = dPrevCent; } if (smoothScaleCount == 4) { float currCentSum = 0; float prevCentSum = 0; for (int i = 0; i < 4; i++) { currCentSum += dCurrCentSmooth[i]; } for (int i = 0; i < 4; i++) { prevCentSum += dPrevCentSmooth[i]; } float scaleAvg = (currCentSum / 5) / (prevCentSum / 5); int destWidth = (int)(sourceWidth * scaleAvg); int destHeight = (int)(sourceHeight * scaleAvg); // If statement is for limiting the size of the image if (destWidth > (currentRotatedImage.Width / 2) && destWidth < (currentRotatedImage.Width * 3) && destHeight > (currentRotatedImage.Height / 2) && destWidth < (currentRotatedImage.Width * 3)) { AForge.Imaging.Filters.ResizeBilinear resizeFilter = new AForge.Imaging.Filters.ResizeBilinear(destWidth, destHeight); pictureBox1.Image = resizeFilter.Apply((Bitmap)currentRotatedImage); pictureBox1.Size = pictureBox1.Image.Size; pictureBox1.Refresh(); } smoothScaleCount = -1; } prevMouseLoc = e.Location; currentScaledImage = pictureBox1.Image; smoothScaleCount++; } }

    Read the article

  • Do Seagate Momentus XT SSD Hybrid drives perform better than a good hard drive + flash on ReadyBoost

    - by Chris W. Rea
    Seagate has released a product called the Momentus XT Solid State Hybrid Drive. At a glance, this looks exactly like what Windows ReadyBoost attempts to do with software at the OS level: Pairing the benefits of a large hard drive together with the performance of solid-state flash memory. Does the Momentus XT out-perform a similar ad-hoc pairing of a decent hard drive with similar flash memory storage under Windows ReadyBoost? Other than the obvious "a hardware implementation ought to be faster than a software implementation", why would ReadyBoost not be able to perform as well as such a hybrid device?

    Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >