Search Results

Search found 2133 results on 86 pages for 'iso'.

Page 48/86 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• DVD-ROM disappeared under Windows-7

  - by hometoast

  Windows-7 (build 7100) has forgotten about and refused to recognize that I have an optical drive attached. Linux LiveCD sees it (sees it and it boots from it), so it's isolated to the Windows installation. I do have VirtualCloneDrive installed. But I know I had access to the optical drive after the installation of that. Only recently did I try to rip an iso image for mounting in a VM. I do not see the device under device manager (Start,Run,"devmgmt.msc"). I really do not want to do a fresh install. What are my next steps?

  Read the article

• Openfiler RAID 10 option not found

  - by chrisling106

  Hi, I'm building a NAS using Openfiler2.3 (from 32-bit ISO), first of all I want to experiment it on VM first before going out and buy the harddrives needed. I created 5 virtual drives on VMware, sda is 2GB and the rest 1GB each (sdb to sde). I left sda blank and want to setup a RAID 10 disk using sdb, sdc, sdd and sde, 4 RAID partitions are setup successfully, but when I try to create a RAID device the only option for RAID level is 1, 0, 5 and 6. RAID 10 is not there! Can someone let me know what have I missed, please? TIA.

  Read the article

• How to install Windows 8 from Ubuntu without a USB or DVD?

  - by 0xEDD1E

  Last week my windows 7 operating system crashed. So I installed Ubuntu 10.04 on the partition Windows 7 was previously on. I have two Partitions, C: and D:. In partition D: I have very important data and I can't format it (I can't backup because it's very heavy ~50 GB). Now I want to install Windows 8. I have downloaded the ISO file of Windows 8 Pro. I don't have a DVD writer or a USB device to Install this. I need to install this on C: partition (the partition on which I have already installed Ubuntu) and I need to protect the data in partition D:. How do I do this?

  Read the article

• Parallels 5: upgrade from Vista to Win 7: annoying deadlock

  - by nobody

  What I have: Parallels 5, Vista installed. Trying to upgrade to Win 7. I have the Win7 .iso mounted as a DVD to my virtual machine. When I start the machine from this DVD, and attempt the upgrade, I'm told (paraphrased) "You booted from DVD. Don't do this. Reboot, then insert the DVD, commence the upgrade from there." But when I try that, the upgrade keeps failing because "There is not enough disk space". I've proven this is a red herring of an error message; the real problem is the installer can't find -any- disk drives. When I instead choose the "Advanced" install, and I am prompted to choose the disk drive, there aren't any to choose from. How do unblock this deadlock?

  Read the article

• What 64bit Desktop Linux (gui) Distribution can I run on an intel processor, especially in virtualbox on mac os x?

  - by cwd

  What 64bit Desktop Linux (GUI) Distribution can I run on an intel processor, especially in VirtualBox on Mac OS X? Ubuntu 32bit works well. ubuntu 64bit is for amd64 only, I think. I know Mac OS X is 64 bit Linux. This is not what I'm asking about. It would be lovely if you could recommend a small install, or one that has a live cd version. Update: I tried downloading the ubuntu-10.10-desktop-amd64.iso package and this is what i get:

  Read the article

• Can't boot into Ubuntu from CD, or from Acronis True Image recovery disk

  - by ChrisA

  I can boot my computer off a home-burned-from-ISO-image Windows 7 (x64 or x86) installation CD, without problems. It's a Quad 6600, 4GB RAM, 8800GT and most of the time runs Win7 with no problems. However, if I boot off a CD containing Ubuntu (10.04 or 9.something IIRC), or a recovery disk created with Acronis True Image Home 2010, it: boots starts to load the OS from the CD then hangs ... and I have to reset. I've tried all these CDs on another computer, and they boot up into Ubuntu or Acronis respectively with no problems at all. Any ideas what to look for? Sorry this is a little vague but I have no idea where to start, really ... if there's more information needed I'll edit the question. TIA!

  Read the article

• Firefox or Chrome - how to force a specific encoding for a page

  - by Mike

  Hi, I am accessing an intranet site built by amateurs, that was constructed to be "best viewed by IE" (arghhh!). The site is in portuguese. All accented letters are jammed and do not appear as they should. As I create sites myself, I know that the best way to build a site in portuguese and other latin languages is to use the "charset=iso-8859-1" on the page's HTML encoding. This will ensure cross-browser and platforms compatibility. But I have no way to change this, because I am a visitor on this site. I don't know the encoding they are using. What I ask is: is there a way I can force my browser (Chrome or Firefox) to recode the page using the correct charset? I need this to work on Ubuntu.

  Read the article

• Remote Installing OS X 10.5 on a PowerBook G4

  - by QuixoticAspie

  I recently acquired a PowerBook G4 (always loved the PPC architecture over Intel when it comes to Apple), currently it has OS X 10.4 installed. Unfortunately I can't find the original 10.5 install disc I had, though I made an ISO of it some time ago, which I've now burnt to a DVD-R DL disc (the SuperDrive is a DVD-R only iirc). This disc keeps being ejected by the PowerBook G4 (reads other discs just fine, except one). So I've been pondering doing a remote install, however the instructions I've seen are for MacBooks - I have DVD or CD Sharing installed, but the part in the instructions (http://guides.macrumors.com/Complete_Steps_to_Perform_a_Clean_OS_X_Reinstall_on_Your_MacBook_Air#Using_Remote_Install) about the 'Install Assistant', I don't get such a thing - only the BootCamp Installer. So my question is: How do I go about doing a remote install on this PowerBook G4? Or is there another alternative, without forking out on a new drive?

  Read the article

• How can I convert audio files to this format?

  - by jeffamaphone

  I have a bunch of audio files that are named .wav but it seems not all .wavs are created equal. For example: $ file * file1.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, stereo 44100 Hz file2.wav: Audio file with ID3 version 2.2.0, contains: MPEG ADTS, layer III, v1, 160 kbps, 44.1 kHz, JntStereo file3.wav: Claris clip art? file4.wav: Audio file with ID3 version 2.2.0, contains: MPEG ADTS, layer III, v1, 160 kbps, 44.1 kHz, JntStereo And for good measure, a non-wav: file5.m4a: ISO Media, MPEG v4 system, iTunes AAC-LC I would like to convert all of these files to the format that file1.wav is: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, stereo 44100 Hz What is the proper set of arguments to pass to afconvert to make that happen?

  Read the article

• VERR_NOT_SUPPORTED when trying to create a windows 8 image in Virtualbox

  - by Bart Burg

  I'm trying to create a Virtualbox image of windows 8 consumer preview. I tried this tutorial: http://www.addictivetips.com/windows-tips/how-to-install-windows-8-on-virtualbox/ I did exactly what was said in that tutorial. At the step "Now navigate to the Windows 8 developer build ISO file that you downloaded and select it." I get the error "Could not get the storage format. (VERR_NOT_SUPPORTED)". I also get this if I use the regular wizard. Host OS: windows 7 Virtualbox version: 4.1.16 Both windows 8 64 bit and 32 bit tested.

  Read the article

• Linux Live CD cannot play video

  - by lamwaiman1988

  I want to switch from windows to linux, but before the switch I would like to try them out in the Live CD. I downloaded the iso and created a multiboot usb stick ( by YUMI Multiboot USB Creator ). I can boot into Ubuntu Desktop 12.04 64 bit LTS and Linux Mint 13 Mate 64 bit. I can access the hard drive from there and I tried some video with the default player comes with them ( e.g: GNOME Player and VLC Player ). The player opened but the video didn't play. However, I can play the same video in Puppy Linux. ( Puppy Linux doesn't has a choice over 32-bit or 64-bit ) Maybe my CPU didn't support 64 bit? Here is a snap from CPUZ: CPU: AMD Phenom II X3 710

  Read the article

• "I/O Error Occurred" in vSphere Client working with ESXi

  - by Chris

  I have a datastore set up in ESXi where I put all my ISOs. Somehow, something broke (I don't know what) and now I can't upload files to that (or any other) datastore. For large, ISO-sized files, the "Uploading..." dialog pops up, hangs for a while, and then the "I/O Error Occurred" displays. For smaller files (10 meg neighborhood), the "Uploading..." dialog comes up, a progress bar starts going, and it estimates a time remaining. Then it hangs at 1 second remaining for a while, and the same "I/O Error Occurred" comes up. Has anyone seen a problem like this?

  Read the article

• SBS 2003 R2 install errors

  - by piagetblix

  I just installed sbs2003 R2 as a learning lab box on my home network. The install seemed to take quit a while with a bit of shuffling between disks 4 and 5. The continue setup checklist showed the red x besides the exchange install and finally gave me an error about the "schema needing extending run, forest /adprep" and told me at the end that the install did not succeed. After a longer than normal reboot it comes up and seems to be OK. What logs do i need to check to see what went wrong? Should i reinstall and try burning the iso's to new media? cheers

  Read the article

• Mac Air Bootcamp Windows 7 Installation and USB3 Hurdles

  - by Casey

  I am trying to load windows 7 on a new Mac Air(OS X 10.9 Mavericks) using Boot camp, a downloaded windows 7 iso file, and USB3 flash drive. No obvious issues with stepping through the initial phases of boot camp and disc partition, but when the system reboots to load windows setup/install from the USB3 flash, it stalls after a few screens and gives a "missing cd/dvd drive" error. I have read similar posts regarding this fail that imply there is possibly a windows 7 compatibility concern with USB3, and that if a USB2 port is available....or if you can change your BIOS to make your USB3 look like USB2...then you can get around this error. Unfortunately I only have USB3 ports on this system, and it appears accessing the PC equivalent "BIOS" on the new Macs is very difficult....and if you screw it up you can ruin the system. Does anyone have any suggestions? I should also mention that there is NOT a CD/DVD drive on the Mac Air....and I can't migrate to Windows8 (for various reasons). Any help is much appreciated!!

  Read the article

• Clonezilla , NLite and PCs with different hardware specs..

  - by r2b2

  Hi, I used Clonezilla to create and restore images from a master computer to other workstations with the same specs. But the problem now is there are new computers whose hardware specs are different than the ones I maintained (mostly the videocard is different). Is it possible to create a customize Windows XP installer using Nlite and integrate all potential videocard and motherboard drivers ? If I then used this NLite ISO to install to a master computer which i will later clone and restore the image to other workstations, will windows xp still pick up the correct driver set? During XP installation, does the installer transfers all the drivers to the computer's harddisk? Thanks! Ryan

  Read the article

• Unable to create system partition or locate existing system partition during Windows-7 installation

  - by glenneroo

  I have Windows XP 32-bit installed on an ASUS A8N-SLI Deluxe with 2x 500gb drives in RAID1 using the NV RAID controller. On this there are 3 partitions (XP, XP backup and DATA) There are also 4x 500gb drives in RAID10 using the Silicon Image 3114R RAID controller. I just purchased a Windows 7 64-bit as an ISO download upgrade version which I promptly burned to DVD and attempted to perform an upgrade installation. Here is the error message I am getting: Firstly, where are these "Setup log files" located? Second, does this mean I need to find compatible (64-bit?) drivers for the Mainboard and put them on floppy? EDIT: As suggested on another forum, I tried downloading the nVidia Mainboard RAID drivers for Windows 2003 64-bit. I loaded the drivers successfully using the Load Driver button, but pressing NEXT still returns this error.

  Read the article

• KVM Guest not reachable from host

  - by Paul

  Hello, I'm running Ubuntu server 9.10, installed KVM etc. Created the bridge network following instructions on help.ubuntu.com/community/KVM/Networking Created a windows 2008 guest using virt-install command line (using virt-manager GUI from a remote Ubuntu desktop would not let me select the ISO location). I can however use a remote virt-manager to connect to the guest and complete the windows install. Within windows 2008 I changed the IP address but cannot ping from outside world. The bridge network appears fine - I'm not sure what else to look at! Here is the interfaces file: The loopback network interface auto lo iface lo inet loopback The primary network interface auto eth0 iface eth0 inet manual # auto br0 iface br0 inet static address 60.234.64.50 netmask 255.255.255.248 network 60.234.0.0 broadcast 60.234.0.255 gateway 60.234.64.49 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 auto eth1 iface eth1 inet static address 192.168.12.2 netmask 255.255.255.0 broadcast 192.168.12.255 The ip of the windows server is 60.234.64.52 What else should I check? Regards Paul.

  Read the article

• Windows 8.1 won't accept my Media Center Pack Product Key

  - by Daniel

  I just installed Windows 8.1 Pro as an upgrade from an ISO torrent. I was able to activate my original Windows 8 key successfully. However, I tried to activate my Media Center Pack key that I purchased for Windows 8 and it errors out the first try. When I try to activate it again, it then says "This key won't work. Check it and try again, or try a different key.". Do I have to purchase the key again? Thanks

  Read the article

• Debian Testing install USB menu does not respond to keyboard

  - by neurolysis

  I'm trying to install Debian Testing onto my Acer Aspire One ZG5 using the testing versions of boot.img and debian-testing-i386-CD-1.iso. I previously installed (two days ago) the latest release of stable, and the boot.img/CD1 from that worked fine, and installed seamlessly. With testing though, the menu does not respond to the keyboard as soon as the menu appears to select Install/Graphical install/Help, etc. I have also tried to boot with an external (USB) keyboard, which again, works fine with the stable version of boot.img/CD1, but not testing. I did some searching and couldn't find anything that looked similar. Any ideas?

  Read the article

• How to boot from a flash drive OS using VirtualBox?

  - by kokbira

  I have two flash drive, one with Slax installed and another for Android x86 Live installed, but they do not boot in my laptop (in my work they boot perfectly). I can boot from some live CDs/DVDs or its ISO files using VirtualBox, but I cannot do it for live flash drives - I put the flash drives and start a VirtualBox without any virtual HD, but VirtualBox does not recognize them as boot options, as it does for CDs/DVDs. Any ideas? Any alternatives if VirtualBox does not support it? Edit1: I'm using Windows (Windows 7) but I would like to know how to do it in Linux (Ubuntu, for example) too.

  Read the article

• Windows setup claims the installation source is not accessible. How do I fix this?

  - by Wil

  I'm trying to install Windows 7 Ultimate over my existing Windows 7 Professional. I downloaded the ISO from Microsoft and burned the install disc at the slowest speed possible (x3). I booted to the DVD, but at the second screen I am already getting an error! That screen I am choosing between "Upgrade" and "Custom". I am trying to choose "Custom" but then I get the error: Windows installation encountered an unexpected error. Verify that the installation sources are accessible, and restart the installation. Error code: 0xE0000100

  Read the article

• What software supports full multisession CD burning on windows?

  - by dma_k

  I know, that beating Nero in this field is very difficult. I have looked through best software listed in wiki, also checked the related posts here and here: most of the software either allows you to create ISO image and/or burn the existing image. However I am interested in the following flow: Import previous session Add/rename/remove files and directories Burn new session UltraISO is very good in (1) and (2). But it cannot append a disk with new session. InfraRecorder/CDBurnerXP can do (1) (2) (3) but: InfraRecorder crashes when trying to import some Nero sessions CDBurnerXP does not allow to move files in previous session to another directories. Is anybody here happy with any other free software?

  Read the article

• Why is my Wifi connection slower than ethernet even though bandwidth should saturated?

  - by supercheetah

  I'm wondering why it is that my wireless connection is slower than my wired connection for things going to the outside world (so, not files being transferred within the network), which is should be faster than the outside connection, which, I would think, would mean that downloading something like an ISO or other large file from the Internet should be the same either way since that should saturate the connection anyway. Does it have something to do with the encryption (WPA)? Could it have something to do with MTU since the MTU for ethernet can be in the range of 1500 to 9000 bytes, and 2304 bytes for 802.11? Do wireless packets have to be buffered, whereas this wouldn't be an issue with ethernet? What's the math behind the difference?

  Read the article

• permission denied when trying to execute a binary I burned to a CD-R

  - by user16654

  On a UBUNTU karmic machine, I burned a cd from the command prompt using: cdrecord -v speed=16 dev=0,1,0 /FPS.iso The CD now contains an executable and some files. I tested the cd by loading it onto another machine (Red Hat 5.3) and when I try to run the program I get the following message: bash: ./FPS1_1: Permission denied I can open other files like text documents (the executable also comes with shared libraries). I realized I had burned the cd as root so I burned another one as another user but I still got the same problem. How can I remove this permission or what is the problem? P.S. the image was in / if that helps

  Read the article

• Startup Disk Creator tool for Debian

  - by user61954

  I was trying to create a USB bootable in Debian to install my new system. I couldnt find any easy to use tool in Debian. I tried downloading the hybrid iso image from the Debian site and copied it to the USB using the dd command as said in Debian site. But it didnt boot. Next I used the Startup Disk Creator tool in Ubuntu and it worked like a charm. Is there any similar tool in Debian? I know that there is Unetbootin but its difficult to install

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >