Search Results

Search found 2743 results on 110 pages for 'macbook air'.

Page 48/110 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• Can I use this power supply + case combination without causing problems?

  - by evan

  I am putting together a computer with a Antec P180 case and a Thermaltake TR2 RX 650 W power supply. The problem is that the Antec P180 case has a separate compartment for the power supply. With an opening for the on/off switch + ac connector to one side, a wall with a small hole for cables to route through on top, a wall on the bottom, and on the other side a fan which pushes air from the hard drive compartment to the power supply compartment. I think the design of the case assumes the power supplies fan is on the side next to the on/off switch, but the fan on the power supply I have is on top, which makes me worry about overheating the power supply. There is about half an inch between the top of the power supply and the wall and the other fan should keep air flowing to push out the air that the power supply pushes upwards. Do you think this setup should work, or should I go get another power supply? Thanks!! PS: This computer will be running an Ubuntu server, so it will always be on, but the rest of the components shouldn't be generating as much heat as they would on say a gaming machine.

  Read the article

• Sync desktop Mac environment to laptop

  - by Andrew Vit

  I spend the majority of my time working at my desktop Mac, which I have configured for my web development environment. My spouse has a MacBook for casual use, and I occasionally steal it back when I need to work off-site, or when travelling. The question is how to best synchronize the two so I can switch between them more readily. I've solved a few obvious things by using online services: Email is hosted on IMAP. Working files are in Dropbox. Source code is managed in git. However, the following are things I always miss when jumping on the laptop: Installed Applications (current versions) Installed libraries & utilities (/usr/local) Apache VirtualHosts & other configurations (/etc) Disk image files for VMs My current method is to connect the MacBook via Firewire target mode and rsync the /Users/me home directory, and then cherry-pick the other items I need from Applications, /etc and /usr/local. The problem with this method is that it can be very time consuming due to things like my virtual machine image files, cached emails, etc. How can I make this faster & easier? Can you recommend a solution for configuration management (so I can repeatably install & configure the same software on both), or synchronization (so I can bring the MacBook up to date nightly, over our home network)?

  Read the article

• Is the exhaust fan necessary?

  - by Borek

  On my new PC, the component making the most noise is the rear exhaust fan on my case (it is the only exhaust fan in my PC). I tried to disconnect it and watched temperatures in SpeedFan and CPU was usually at about 35C, peaking to about 50C when the system was under load - this doesn't look too bad. So I'm considering that I'll leave the exhaust fan disconnected permanently after which the computer is very quiet - the only noise-making components are Arctic Cooling Freezer 7 Pro Rev.2 (CPU fan) and PSU fan (Enermax Pro 82+), both being quiet enough as far as I can tell. (My GPU has a passive cooler.) Also, those 2 components are moving parts so will provide some air flow in the case and, even better, PSU fan sucks the air out of the case so it kind of is an exhaust fan in itself. Does anyone run with the exhaust fan disconnected? You don't have to tell me that it's always better to have more air flow than less, I know that, but the noise is also a consideration for me and temperatures around 40C should be fine shouldn't they? (I might also consider getting a quieter case fan but I'm specifically interested in your opinion on the no exhaust fan scenario.)

  Read the article

• Trying to delete directory with "rm -rf", but get message that it's not empty

  - by Ben Hocking

  I've tried deleting a directory using "rm -rf" and I'm getting the message "Directory not empty": Bens-MacBook-Pro:please benjaminhocking$ ls -lart empty_directory/ total 16 drwxr-xr-x 5 benjaminhocking staff 170 Aug 27 14:46 . drwxr-xr-x 3 benjaminhocking staff 102 Aug 27 15:28 .. Bens-MacBook-Pro:please benjaminhocking$ rm -rf empty_directory/ rm: empty_directory/: Directory not empty Bens-MacBook-Pro:please benjaminhocking$ rmdir empty_directory/ rmdir: empty_directory/: Directory not empty If I try the same thing using Finder (dragging the folder to the Trash), I get the message The operation can’t be completed because the item “empty_directory” is in use. I've tried doing xattr -d com.apple.quarantine, purely out of superstition, but it did no good. A probably important piece of context is that this directory was initially in a directory that should've been deleted by a "make clean" command I issued prior to Terminal locking up on me, after which a little over half of the other programs I had running also locked up, including Skype, and eventually the OS itself. I ended up having to reboot the computer by pressing and holding the power key. Edit to add: Another important piece of information I left off was that this was happening in an encrypted folder à la encfs. I was able to track down the corresponding folder in the encrypted side of things and delete it there. I still don't know why I couldn't do it from the decrypted side of things like I normally do. I'll leave this unanswered for now in case anyone has a good answer for that.

  Read the article

• Daisy-chainable DisplayPort Monitors

  - by thepurplepixel

  I am the proud new owner of a MacBook Pro with a mini-DisplayPort. My desk setup used to allow me to position the screen of my old MacBook beside an external monitor, essentially allowing dual-head. It was also advantageous that my old MBP and my external monitor had the same resolution, 1440x900. Now, I'm searching for a set of two monitors that I can use a HengeDock with. Unfortunately, the MacBook Pro suffers from having only one mini-DisplayPort. Looking up the spec for DisplayPort 1.2 (which the MBP supports), DisplayPort daisy chaining is supported. What I'm looking for is a monitor that has two DisplayPorts so I can daisy chain two monitors off the single mini-DisplayPort. What I don't want is a USB-based video solution. I need full acceleration on both monitors; an external video card won't cut it. I hope I don't have to wait a few years for these monitors to come out. TL;DR: I need two monitors with two DisplayPorts each that I can daisy-chain. Thanks!

  Read the article

• Sync desktop Mac environment to laptop

  - by Andrew Vit

  I spend the majority of my time working at my desktop Mac, which I have configured for my web development environment. My spouse has a MacBook for casual use, and I occasionally steal it back when I need to work off-site, or when travelling. The question is how to best synchronize the two so I can switch between them more readily. I've solved a few obvious things by using online services: Email is hosted on IMAP. Working files are in Dropbox. Source code is managed in git. However, the following are things I always miss when jumping on the laptop: Installed Applications (current versions) Installed libraries & utilities (/usr/local) Apache VirtualHosts & other configurations (/etc) Disk image files for VMs My current method is to connect the MacBook via Firewire target mode and rsync the /Users/me home directory, and then cherry-pick the other items I need from Applications, /etc and /usr/local. The problem with this method is that it can be very time consuming due to things like my virtual machine image files, cached emails, etc. How can I make this faster & easier? Can you recommend a solution for configuration management (so I can repeatably install & configure the same software on both), or synchronization (so I can bring the MacBook up to date nightly, over our home network)?

  Read the article

• Locate devices within a building

  - by ams0

  The situation: Our company is spread between two floors in a building. Every employee has a laptop (macbook Air or MacbookPro) and an iPhone. We have static DHCP mappings and DNS resolution so every mobile gets a name like employeeiphone.example.com, every macbook air gets a employeelaptop.example.com and every macbook pro gets a employeelaptop.example.com on the Ethernet interface (the wifi gets a dynamic IP from a small range dedicated for the purpose). We know each and every MAC address of phones and laptops, since we do DHCP static mapping (ISC DHCP server runs on linux). At each floor we have a Netgear stack of two switches, connected via 10GB fiber to each other. No VLANs so far. At every floor there are 4 Airport Extreme making a single SSID network with WPA2 authentication. The request: Our CTO wants to know who is present at which floor. My solution (so far): Every switch contains an table listing MAC address and originating port. On each switch stack, all the MAC addresses coming from the other floor are listed as coming on port 48 (the fiber link). So I came up with: 1) Get the table from each switch via SNMP 2) Filter out the ones associated with port 48 3) Grep dhcpd.conf, removing all entries not *laptop and not *iphone 4) Match the two lists for each switch, output in JSON or XML 5) present the results on a dashboard for all to see I wrote it in bash with a lot of awk and sed, it kinda works but I always have for some reason stale entries in the switch lookup tables, making it unreliable; some people may have put their laptop to sleep, their iphones drop connections after a while, if not woken up and so on..I searched left and right, we are prepared to spend a little on the project too (RFIDs?), does anybody do something similar? I can provide with the script if needed (although it's really specific to our switches and naming scheme). Thanks! p.s. perhaps is this a question for stackoverflow? please move if it so.

  Read the article

• Error during maven/ant build: "[java] Timestamp response not valid"

  - by fei

  My maven build started failing randomly, and it got the following error which I cannot make sense of, and googling it doesn't give me anything useful: [echo] Creating a full package... [java] Timestamp response not valid [INFO] ------------------------------------------------------------------------ [ERROR] BUILD ERROR [INFO] ------------------------------------------------------------------------ [INFO] Failed to execute: Executing Ant script: /airtest.build.xml [package-admin-air]: Failed to execute. Java returned: 10 [exec] [DEBUG] Trace [exec] org.apache.maven.lifecycle.LifecycleExecutionException: Failed to execute: Executing Ant script: /airtest.build.xml [package-admin-air]: Failed to execute. [exec] at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(DefaultLifecycleExecutor.java:719) [exec] at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalWithLifecycle(DefaultLifecycleExecutor.java:556) [exec] at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(DefaultLifecycleExecutor.java:535) [exec] at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHandleFailures(DefaultLifecycleExecutor.java:387) [exec] at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegments(DefaultLifecycleExecutor.java:348) [exec] at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLifecycleExecutor.java:180) [exec] at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:328) [exec] at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:138) [exec] at org.apache.maven.cli.MavenCli.main(MavenCli.java:362) [exec] at org.apache.maven.cli.compat.CompatibleMain.main(CompatibleMain.java:60) [exec] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) [exec] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) [exec] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [exec] at java.lang.reflect.Method.invoke(Method.java:597) [exec] at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) [exec] at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) [exec] at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) [exec] at org.codehaus.classworlds.Launcher.main(Launcher.java:375) [exec] Caused by: org.apache.maven.plugin.MojoExecutionException: Failed to execute: Executing Ant script: /airtest.build.xml [package-admin-air]: Failed to execute. [exec] at org.apache.maven.script.ant.AntMojoWrapper.execute(AntMojoWrapper.java:56) [exec] at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPluginManager.java:490) [exec] at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(DefaultLifecycleExecutor.java:694) [exec] ... 17 more [exec] Caused by: org.codehaus.plexus.component.factory.ant.AntComponentExecutionException: Executing Ant script: /airtest.build.xml [package-admin-air]: Failed to execute. [exec] at org.codehaus.plexus.component.factory.ant.AntScriptInvoker.invoke(AntScriptInvoker.java:227) [exec] at org.apache.maven.script.ant.AntMojoWrapper.execute(AntMojoWrapper.java:52) [exec] ... 19 more [exec] Caused by: C:\Users\dev\plexus-ant-component4263631821803364095.build.xml:445: Java returned: 10 [exec] at org.apache.tools.ant.taskdefs.Java.execute(Java.java:87) [exec] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275) [exec] at org.apache.tools.ant.Task.perform(Task.java:364) [exec] at org.apache.tools.ant.Target.execute(Target.java:341) [exec] at org.apache.tools.ant.Target.performTasks(Target.java:369) [exec] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216) [exec] at org.apache.tools.ant.Project.executeTarget(Project.java:1185) [exec] at org.codehaus.plexus.component.factory.ant.AntScriptInvoker.invoke(AntScriptInvoker.java:222) This is a random error that pops up in various point during the build process, and sometimes the build will succeed and then the next one will fail again. This is really weird, does anyone seen this before? I'm using maven 2.2.1 BTW, the error return code 10 in windows mean "Environment is invalid.

  Read the article

• Installing a application binary on iphone through mac?

  - by hemant

  I have a application binary (.app) file on my MacBook... I dont have the source file. Is there any possible way that I can install the application on my iPhone through my MacBook?

  Read the article

• creating a disc image on mac [closed]

  - by jonathan

  Hi. my macbook pro is on the fritz! I bought a new imac because i couldn't afford the new laptop. Is it possible for me to take a disc image of a macbook pro and have it all work on a new imac with a newer OS. I really just want to keep Photoshop (yes, I did not buy it so do not have the insatllers...) Thanks for any info.

  Read the article

• How to bundle a gem in Rails? urgent

  - by jaycode

  HELP!! I need to bundle a gem otherwise a published client's site will stay dead MacBook-Pros-MacBook-Pro:pn macbookpro$ sudo ruby script/generate sanitize Missing the Rails 2.3.5 gem. Please `gem install -v=2.3.5 rails`, update your RAILS_GEM_VERSION setting in config/environment.rb for the Rails version you do have installed, or comment out RAILS_GEM_VERSION to use the latest version installed.

  Read the article

• Mac laptop usage and development discussion?

  - by George2

  Hello everyone, I have got a new Mac book (MacBook Pro), and I am previously using Windows. I use this MacBook for personal (e.g. instant messaging, document, browsing the web) and development (writing C++ and Java code) purpose. Any recommended discussion group or forums (or I can directly ask here in StackOverflow)? I am a newbie. thanks in advance, George

  Read the article

• Rails auto_complete "undefined method `auto_complete_for'" problem

  - by Andrew Wize

  rails - 2.3.8 ruby - 1.8.7 After auto_complete plugin installstion i still have "undefined method `auto_complete_for'" problem! Andrey-Bezruks-MacBook-Pro:eyeonasia.stage wizeflux$ ruby script/plugin install http://github.com/rails/auto_complete.git --force svn: '/Users/wizeflux/Projects/ionasia/eyeonasia.stage/vendor/plugins' is not a working copy Initialized empty Git repository in /Users/wizeflux/Projects/ionasia/eyeonasia.stage/vendor/plugins/auto_complete/.git/ warning: Option "depth" is ignored for github.com/rails/auto_complete.git From github.com/rails/auto_complete * branch HEAD - FETCH_HEAD Andrey-Bezruks-MacBook-Pro:eyeonasia.stage wizeflux$ after restarting server i get an error on line " auto_complete_for :listings, :name " - undefined method `auto_complete_for' for #

  Read the article

• iPhone - Developing on multiple Macs

  - by hecta

  I have a mac and a macbook, and one iPhone device and want to develop on both systems. My enrollment type is individual. How am I able to install the developer certificate and provisioning profiles on both machines? On the macbook it says 'a valid signing identity matching this profile could not be found in your keychain'. In my keychain I have a 'green status' for my developer certificate and in the xcode organizer for my device as well.

  Read the article

• Is there a way to iterate over all open windows in Mac OS X?

  - by Alex

  When you unplug an external monitor with a higher resolution that your macbook from your laptop, the windows mostly retain their width, but their size gets clipped to the (smaller) height of the macbook screen. When you plug the monitor back in, their size remains frustratingly small. My question is: is there any way that I can iterate over all open windows, save their size, and restore them once the monitor gets plugged in again?

  Read the article

• Vacuum spread in a tile-based space game (like in Faster Than Light game)

  - by Reeze

  I've a space game with tilemap that looks like this (simplified): Map view - from top (like in SimCity 1) 0 - room space, 1 - some kind of wall, 8 - "lock" beetween rooms public int[,] _layer = new int[,] { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, { 1, 1, 8, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, { 0, 1, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, { 0, 1, 0, 8, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, { 0, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, }; Each tile contains Air property (100 = air, 0 = vacuum). I made a little helper method to take tiles near tile with vacuum (to "suck air"): Point[] GetNearCells(Point cell, int distance = 1, bool diag = false) { Point topCell = new Point(cell.X, cell.Y - distance); Point botCell = new Point(cell.X, cell.Y + distance); Point leftCell = new Point(cell.X - distance, cell.Y); Point rightCell = new Point(cell.X + distance, cell.Y); if (diag) { return new[] { topCell, botCell, leftCell, rightCell }; } Point topLeftCell = new Point(cell.X - distance, cell.Y - distance); Point topRightCell = new Point(cell.X + distance, cell.Y + distance); Point botLeftCell = new Point(cell.X - distance, cell.Y - distance); Point botRightCell = new Point(cell.X - distance, cell.Y - distance); return new[] { topCell, botCell, leftCell, rightCell, topLeftCell, topRightCell, botLeftCell, botRightCell }; } What is the best practice to fill rooms with vacuum (decrease air) from some point? Should i use some kind of water flow? Thank you for any help!

  Read the article

• One iPhone, two developer machines

  - by willcodejavaforfood

  Hi all, I switch between my iMac and MacBook when working on my apps. I've always used my iMac to test the apps on the actual device, but I would like to be able to do this from both computers. I cannot seem to use the profile on my MacBook as it does not have the correct Certificate Signing Request in the KeyChain. Is there a way to copy these between machines and KeyChains? :)

  Read the article

• PHP problems when transfering code from Windows to OS X

  - by Makka95

  I have recently bought a new MacBook Pro. Before I had my MacBook Pro I was working on a website on my desktop computer. And now I want to transfer this code to my new MacBook Pro. The problem is that when I transfered the code (I put it on Dropbox and simply downloaded it on my MacBook Pro) I started to see lots of error messages in my PHP code. The error message I”m receiving is: Warning: Cannot modify header information - headers already sent by (output started at /some/file.php:1) in /some/file.php on line 23 I have done some research on this and it seems that this error is most frequently caused by a new line, simple whitespace or any output before the <?php sign. I have looked through all the places where I have cookies that are being sent in the HTTP request and also where I'm using the header() function. I haven’t detected any output or whitespace that possibly could interfere and cause this problem. Noteworthy is that the error always says that the output is started at line 1. Which got me thinking if there is some kind of coding differences in the way that the Mac OS X and Windows operating systems handle new lines or white spaces? Or could the Dropbox transfer messed something up? The code on one of the sites(login.php) which produces the error: <?php include "mysql_database.php"; login(); $id = $_SESSION['Loggedin']; setcookie("login", $id, (time()+60*60*24*30)); header('Location: ' . $_SERVER['HTTP_REFERER']); ?> login function: function login() { $connection = connecttodatabase(); $pass = ""; $user = ""; $query = ""; if (isset($_POST['user']) && $_POST['user'] != null) { $user = $_POST['user']; if (isset($_POST['pass']) && $_POST['pass'] != null) { $pass = md5($_POST['pass']); $query = "SELECT ID FROM Anvandare WHERE Nickname='$user' AND Password ='$pass'"; } } if ($query != "") { $id = $connection->query($query); $id = mysqli_fetch_assoc($id); $id = $id['ID']; $_SESSION['Loggedin'] = $id; } closeconnection($connection); } Complete error: Warning: Cannot modify header information - headers already sent by (output started at /Users/name/GitHub/website/login.php:1) in /Users/namn/GitHub/website/login.php on line 9

  Read the article

• How to reduce the Bandwidth Consumption in flex app,while its launching application ?

  - by Thirst for Excellence

  Recently i designed one Abode air Chat application, which gets the chat messages from admin-Application(we bApplication), band width consumption is too high while each client launching air application to pull the data from database to my-amf endpoint. in this am using blazeds,Jetty server,simple java classes(not servlets) calling with remote object, Please any one suggest me few techiniques to 1)reduce the bandwidh consumption while sending message to each client from admin 2)minimize the time to pull the data from database while client launching application. Regards, Thirst for Excellence

  Read the article

• Alternative Methods of Sharing Folders in Windows?

  - by Blaenk

  Hey guys. I'm running Windows 7 and as of now I simply share folders as one usually does in Windows. I then have a MacBook with Leopard (Now Snow Leopard) which I use to connect to my computer to mount the shares by going to Finder, then CMD + K and typing smb://BlaenkPC (The name of my PC) into the address box. This consequently connects to my computer and mounts all of the shares. The problem is that sometimes, if for example I close my MacBook (Which makes it go to sleep) or sometimes even without doing that, the connection somehow drops. Sometimes I close the MacBook and upon re-opening it, everything still works; it's random. It still shows the computer as being connected, but it just shows 'loading' indefinitely. If I hit 'eject' with the intention of re-connecting to the computer, it disappears from the sidebar (The Computer Icon) in Finder, but I cannot re-connect. Activity Monitor (or ps aux, whichever) both show hung instances of umount; one for each share that was mounted. I cannot kill these processes with kill or killall (Yes, even with sudo, and sending signal -9). This has happened to me before, and here is another person who has experienced this. My question boils down to this: Is there an alternative method of sharing folders in Windows, that my Mac can read/understand, that is possibly more reliable and preferably just as fast? I usually use the mounted shares to watch television episodes off my computer, or movies, etc. (In other words, I open them in VLC and they automatically stream from my computer). As far as I can tell, this is a problem with the Samba protocol. I have heard of NFS, but I am not sure if I would have to re-format my drives, or what. I don't mind running a service or daemon to allow the sharing of the folders, I just want it to be done and hopefully in a better way than typical Windows shares through Samba. Usually when I encounter this problem, which is often (read: every day), I have no other option but to restart the MacBook. As I stated in the first question I linked to, shutting down and restarting don't work; I have to manually force the shutdown by holding the power button. I have not modified my installation of Mac OS X in any hackish way, so I doubt it's something with the Operating System, but worst come to worst, I might end up reformatting and doing a clean install to see if that fixes anything, as I am at a complete loss as to what may be causing the problem, and no one else seems to have any idea or care, despite there being quite a few people suffering from this problem, as my research has shown. Any pieces of information that can help are extremely appreciated. You don't have to answer every question on here, but maybe even some insight as to why it might not be possible to kill those hung umount instances for example, or why I may not be able to reconnect using samba (Is it something regarding the way the protocol works?). One thing to note is that I have another computer in the home network that doesn't seem to have this problem. However, it is also running Windows 7 (Note though that I am not using the homegroup feature, but the typical windows sharing feature). My only deduction is that the problem is being caused by the way the Mac (Or Samba implementation, whichever) is handling things. Perhaps it is a limitation.

  Read the article

• git pull gives error: 401 Authorization Required while accessing https://git.foo.com/bar.git

  - by spuder

  My macbook pro is able to clone/push/pull from the company git server. My cent 6.3 vm gets a 401 error git clone https://git.acme.com/git/torque-setup "error: The requested URL returned error: 401 Authorization Required while accessing https://git.acme.com/git/torque-setup/info/refs As a work around, I've tried creating a folder, with an empty repository, then setting the remote to the company server. I get the same error when trying a git pull The remotes are identical between the machines MacBook Pro (working) git --version git version 1.7.10.2 (Apple Git-33) git remote -v origin https://git.acme.com/git/torque-setup (fetch) origin https://git.acme.com/git/torque-setup (push) Cent 6.3 (not working) yum install -y git git --version git version 1.7.1 git remote -v origin https://git.acme.com/git/torque-setup (fetch) origin https://git.acme.com/git/torque-setup (push) The git server only allows https. Not git or ssh connections. Why is the macbook pro able to do a git pull, while the cent os machine can't? Solution Update 2013-5-15 As jku mentioned, the culprit is the old version of git installed on the cent box. Unfortunately, 1.7.1 is what you get when you run yum install git The work around is to manually install a newer version of git, or simply add the username to the repo git clone https://[email protected]/git/torque-setup

  Read the article

• What's slowing for loops/assignment vs. C?

  - by Lee

  I have a collection of PHP scripts that are extremely CPU intensive, juggling millions of calculations across hundreds of simultaneous users. I'm trying to find a way to speed up the internals of PHP variable assignment, and looping sequences vs C. Although PHP is obviously loosely typed, is there any way/extension to specifically assign type (assign, not cast, which seems even more expensive) in a C-style fashion? Here's what I mean. This is some dummy code in C: #include <stdio.h> int main() { unsigned long add=0; for(unsigned long x=0;x<100000000;x++) { add = x*59328409238; } printf("x is %ld\n",add); } Pretty self-explanatory -- it loops 100 million times, multiples each iteration by an arbitrary number of some 59 billion, assigns it to a variable and prints it out. On my Macbook, compiling it and running it produced: lees-macbook-pro:Desktop lee$ time ./test2 x is 5932840864471590762 real 0m0.266s user 0m0.253s sys 0m0.002s Pretty darn fast! A similar script in PHP 5.3 CLI... <?php for($i=0;$i<100000000;$i++){ $a=$i*59328409238; } echo $a."\n"; ?> ... produced: lees-macbook-pro:Desktop lee$ time /Applications/XAMPP/xamppfiles/bin/php test3.php 5.93284086447E+18 real 0m22.837s user 0m22.110s sys 0m0.078s Over 22 seconds vs 0.2! I realize PHP is doing a heck of a lot more behind the scenes than this simple C program - but is there any way to make the PHP internals to behave more 'natively' on primitive types and loops?

  Read the article

• git stash blunder:

  - by Chirag Patel

  I did a git stash pop and ended up with merge conflicts. I removed the files from the file system and did a git checkout as shown below, but it thinks the files are still unmerged. I then tried replacing the files and doing a git checkout again and same result. I event tried forcing it with -f flag. Any help would be appreciated! chirag-patels-macbook-pro:haloror patelc75$ git status app/views/layouts/_choose_patient.html.erb: needs merge app/views/layouts/_links.html.erb: needs merge # On branch prod-temp # Changes to be committed: # (use "git reset HEAD <file>..." to unstage) # # modified: db/schema.rb # # Changed but not updated: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # # unmerged: app/views/layouts/_choose_patient.html.erb # unmerged: app/views/layouts/_links.html.erb chirag-patels-macbook-pro:haloror patelc75$ git checkout app/views/layouts/_choose_patient.html.erb error: path 'app/views/layouts/_choose_patient.html.erb' is unmerged chirag-patels-macbook-pro:haloror patelc75$ git checkout -f app/views/layouts/_choose_patient.html.erb warning: path 'app/views/layouts/_choose_patient.html.erb' is unmerged

  Read the article

• Permissions on Mac OSX

  - by Linda

  I think that this is a permissions issue but I am not sure and I am not sure how to repair the problem. I have a new MacBook. I have 2 external drives that were previously used on another MacBook. I have a lot of folders and XCode projects on the external drives. When I try to work on the projects, there is a message similar to this: "This file is not writable. You may not be able to save your changes, but you will be able to Save a Copy somewhere else. Do you want to edit this file anyway?" If I make changes and try to close the project I get this error: "The project and user files project.pbxproj and macbook.pbxuser for project “thirdtry.xcodeproj” are not writeable and cannot be saved. Your changes will be lost if you close the project. You may need to SCM edit these files to gain writability." I have tried just to rename the folder but that permission is not allowed either unless I individually change permissions for every file in an XCode project. As you can imagine, this could be time consuming for tons of files and projects. I can copy the project into internal memory and can run it then after renaming the folder that contains all of the files. This defeats the purpose of having all of the projects on an external drive. Also, in XCode, there is no "Build and Run" there is only "Build and Debug" now. I don't know if this is related or not. Suggestions for how to repair all permissions to all files and folders on my external drives? What about the "Build and Debug" and no "Build and Run" choice? Thanks, Linda

  Read the article

• trouble setting up anonymous login in ejabberd

  - by sofia

  Hi, In ejabberd.cfg I have the following {host_config, "thisislove-MacBook-2.local", [{auth_method, [internal, anonymous]}, {allow_multiple_connections, false}, {anonymous_protocol, both}]}. but when using speeqe javascript client (speeqe.com) to connect, I see it sends <body rid='1366284187' xmlns='http://jabber.org/protocol/httpbind' to='thisislove-macbook-2.local' xml:lang='en' wait='60' hold='1' window='5' content='text/xml; charset=utf-8' ver='1.6' xmpp:version='1.0' xmlns:xmpp='urn:xmpp:xbosh'/> and the server responds with <body xmlns='http://jabber.org/protocol/httpbind' sid='f89bf034b02fa6b884bb0c55be3f1f69e45e3866' wait='60' requests='2' inactivity='30' maxpause='120' polling='2' ver='1.8' from='thisislove-macbook-2.local' secure='true' authid='353072658' xmlns:xmpp='urn:xmpp:xbosh' xmlns:stream='http://etherx.jabber.org/streams' xmpp:version='1.0'><stream:features xmlns:stream='http://etherx.jabber.org/streams'><mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'><mechanism>DIGEST-MD5</mechanism><mechanism>PLAIN</mechanism></mechanisms><register xmlns='http://jabber.org/features/iq-register'/></stream:features></body> Notice the mechanisms, DIGEST-MD5 & PLAIN. If I'm not mistaken it should have ANONYMOUS as a mechanism as well. So what happens is that speeqe simply terminates the connection. As such I'm thinking i must be missing something in the anonymous configuration or the muc config. In the mod_muc configg, I have {mod_muc, [ %%{host, "conference.@HOST@"}, {access, muc}, {access_create, muc}, {access_persistent, muc}, {access_admin, muc_admin}, {max_room_name, 190}, {max_room_desc, 190}, {max_users, 500} ]} So what am I missing? Thanks

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >