Search Results

Search found 2379 results on 96 pages for 'nvidia prime'.

Page 48/96 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• File browsing on Nautilus extremely slow after upgrade to 12.04

  - by Tobelli

  One month ago I updated (no fresh install) to 12.04. Since then nautilus got extremely slow. When I open a folder that contains many subfolders I sometimes have to wait 4 seconds until everything is displayed. This has never been like that before, in previous versions I could always browse between my files extremely fast. I looked in "additional drivers" and changed from Nvidia current-version-update to the recommended drivers. This drastically increased the performance and speed of file browsing, unfortunately just for a couple of days. Now I am stuck again with the very slow Nautilus. I also tried to install the latest nvidia driver like it was suggested here: http://www.techlw.com/2012/03/install-nvidia-drivers-on-ubuntu-1204.html Did not work at all. Also when using the dash to try to find files it does not respond properly: does not find files or loads for ages until the file is displayed. I am working on an Acer Notebook with Intel® Core™ i5 CPU M 430 @ 2.27GHz × 4 6GB RAM GeForce GT 320M/PCIe/SSE2 64 Bit Ubuntu 12.04

  Read the article

• Having extreme issues getting Compiz working on Ubuntu 11.10 (32-bit)

  - by Josh Hornell

  I have been working very hard the past few days to try to get Compiz configured and working correctly but I have been running into a lot of issues. I first installed the CompizConfig Settings Manager and tried different features such as the desktop cube and couldn't get any of them to work. Then I read that I may not have the right graphics card drivers installed (Nvidia GT540m). So I went into the Additional Drivers tool and it shows that 'no proprietary drivers are in use on this system', which struck me as a bit odd as when I very first installed Ubuntu it showed that my Nvidia drivers were installed an active until I downloaded and installed the updates to Ubuntu and since then it's shown empty. I then tried to install my graphics card drivers manually via this article How do I install the latest Nvidia drivers via the Additional Drivers tool?. I rebooted and had no issue although I tried to go back into the CompizConfig Settings Manager and couldn't get anything to work as well as my Additional Drivers tool still showed no drivers installed. I feel like I've tried about everything I can think of and any help would be much appreciated!

  Read the article

• HDMI & Display Port stopped work on 11.10

  - by dizzy

  After upgraded two laptops to 11.10, HDMI and Display ports stopped to work. Symptoms on each (btw. it used to work with 11.04 on both): laptop Dell Inspiron 1525 (HDMI, Intel GMX 3100): after HDMI cable is plugged in, screen is corrupted (no panel, no icons), system is unresponsive, TV set receives some signal, but only blue screen and some regular ticks can be heard. Unplugging the cable system recovers. No logs were checked. Thinkpad W510 (DisplayPort, NVidia). Simple "Screens" utility does not recognizes TV set, but this is something to do with the differences between Nvidia driver API and the one expected from the utility, as far I could spot on the net. However, using Nvidia-settings, TV is recognized, but cannot be enabled and used. Beside that, touch pad freezes after HDMI2DisplayPort connector is plugged in the laptop (not immediately, but after few seconds - probably after some handshake with the TV set crashes). It is strange that no such bug reports can be found on the net. So, I guess it is something wrong on our laptops only, but would appreciate some hints (i.e. any known changes recently related to HDMI, Display Port, X-Windows, kernel... wherever I should take a look and fix the issue).

  Read the article

• GPGPU

  WhatGPU obviously stands for Graphics Processing Unit (the silicon powering the display you are using to read this blog post). The extra GP in front of that stands for General Purpose computing.So, altogether GPGPU refers to computing we can perform on GPU for purposes beyond just drawing on the screen. In effect, we can use a GPGPU a bit like we already use a CPU: to perform some calculation (that doesn’t have to have any visual element to it). The attraction is that a GPGPU can be orders of magnitude faster than a CPU.WhyWhen I was at the SuperComputing conference in Portland last November, GPGPUs were all the rage. A quick online search reveals many articles introducing the GPGPU topic. I'll just share 3 here: pcper (ignoring all pages except the first, it is a good consumer perspective), gizmodo (nice take using mostly layman terms) and vizworld (answering the question on "what's the big deal").The GPGPU programming paradigm (from a high level) is simple: in your CPU program you define functions (aka kernels) that take some input, can perform the costly operation and return the output. The kernels are the things that execute on the GPGPU leveraging its power (and hence execute faster than what they could on the CPU) while the host CPU program waits for the results or asynchronously performs other tasks.However, GPGPUs have different characteristics to CPUs which means they are suitable only for certain classes of problem (i.e. data parallel algorithms) and not for others (e.g. algorithms with branching or recursion or other complex flow control). You also pay a high cost for transferring the input data from the CPU to the GPU (and vice versa the results back to the CPU), so the computation itself has to be long enough to justify the overhead transfer costs. If your problem space fits the criteria then you probably want to check out this technology.HowSo where can you get a graphics card to start playing with all this? At the time of writing, the two main vendors ATI (owned by AMD) and NVIDIA are the obvious players in this industry. You can read about GPGPU on this AMD page and also on this NVIDIA page. NVIDIA's website also has a free chapter on the topic from the "GPU Gems" book: A Toolkit for Computation on GPUs.If you followed the links above, then you've already come across some of the choices of programming models that are available today. Essentially, AMD is offering their ATI Stream technology accessible via a language they call Brook+; NVIDIA offers their CUDA platform which is accessible from CUDA C. Choosing either of those locks you into the GPU vendor and hence your code cannot run on systems with cards from the other vendor (e.g. imagine if your CPU code would run on Intel chips but not AMD chips). Having said that, both vendors plan to support a new emerging standard called OpenCL, which theoretically means your kernels can execute on any GPU that supports it. To learn more about all of these there is a website: gpgpu.org. The caveat about that site is that (currently) it completely ignores the Microsoft approach, which I touch on next.On Windows, there is already a cross-GPU-vendor way of programming GPUs and that is the DirectX API. Specifically, on Windows Vista and Windows 7, the DirectX 11 API offers a dedicated subset of the API for GPGPU programming: DirectCompute. You use this API on the CPU side, to set up and execute the kernels that run on the GPU. The kernels are written in a language called HLSL (High Level Shader Language). You can use DirectCompute with HLSL to write a "compute shader", which is the term DirectX uses for what I've been referring to in this post as a "kernel". For a comprehensive collection of links about this (including tutorials, videos and samples) please see my blog post: DirectCompute.Note that there are many efforts to build even higher level languages on top of DirectX that aim to expose GPGPU programming to a wider audience by making it as easy as today's mainstream programming models. I'll mention here just two of those efforts: Accelerator from MSR and Brahma by Ananth. Comments about this post welcome at the original blog.

  Read the article

• How do you create large, growable, shared filesystems on Linux at AWS?

  - by Reece

  What are acceptable/reasonable/best ways to provide large, growable, shared storage at AWS, exposed as a single filesystem? We're currently making 1TB EBS volumes ~biweekly and NFS exporting with no_subtree_check and nohide. In this setup, distinct exports appear under a single mount on the client. This arrangement does not scale well. The options we've considered: LVM2 with ext4. resize2fs is too slow. Btrfs on Linux. not obviously ready for prime time yet. ZFS on Linux. not obviously ready for prime time yet (although LLNL uses it) ZFS on Solaris. future of this combo is uncertain (to me), and new OS in the mix glusterfs. heard mostly good but two scary (and maybe old?) stories. The ideal solution would provide sharing, a single fs view, easy expandability, snapshots, and replication. Thanks for sharing ideas and experience.

  Read the article

• Protected flash video (requires HAL) on Gentoo

  - by Mala

  I am unable to play "protected" flash video, such as Amazon Prime Instant Video. From what I've read and uncovered, this seems to be due to a lack of HAL being installed on my computer. Confirmation that it is required for protected video can be seen towards the beginning of http://helpx.adobe.com/x-productkb/multi/flash-player-11-problems-playing.html However, hal is not in the gentoo portage tree, and in any case has been deprecated and replaced by udev. How can I go about getting Amazon Prime Instant Video to work again? I was considering grabbing the source from http://www.freedesktop.org/wiki/Software/hal but the links there won't load, and trying to install it from old ebuilds or from overlays which claim to still support it (e.g. kde-sunset) result in a compilation error: In file included from addon-generic-backlight.c:38:0: /usr/include/glib-2.0/glib/gmain.h:21:2: error: #error "Only <glib.h> can be included directly." Has anyone else solved this issue?

  Read the article

• Borrow Harry Potter’s eBooks from Amazon Kindle Owner’s Lending Library

  - by Rekha

  From June 19, 2012, Amazon.com customers can borrow All 7 Harry Potter books from Kindle Owner’s Lending Library (KOLL). The books are available in English, French, Italian, German and Spanish. Prime Members of Amazon owning Kindle, can choose from 145,000 titles. US customers can borrow for free with no due dates and also as frequently as a month. There are no limits on the number of copies available for the customers. Anyone can read the books simultaneously by borrowing them. The bookmarks in the borrowed books are saved, for the customers to continue reading where they stopped even when they re-borrow the book. Prime members also have the opportunity to enjoy free two day shipping on millions of items and  unlimited streaming of over 18,000 movies and TV episodes. Amazon has got an exclusive license from J.K. Rowling’s Pottermore. The series cost between $7.99 and $9.99 for the individual books. Pottermore’s investment on these books are compensated by Amazon’s large payment. Via Amazon. CC Image Credit Amazon KOLL.

  Read the article

• How can I transfer files to a Kindle Fire with a Micro-USB cable?

  - by Jeff

  I'm running Ubuntu 11.10, and when I connect my Kindle Fire to my computer via micro usb, it is not recognized automatically. Other usb devices, such as my ipod and digital camera, are recognized just fine. It does not appear to be a usb power issue, since the Kindle Fire wakes up from sleeping when it is plugged in. I never get the message on the Kindle telling me it is ready to accept files from the computer, though. Here are the last 15 lines of dmesg after plugging the kindle in: jeff@prime:~$ dmesg | tail -n 15 [45918.269671] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [45929.072149] wlan0: no IPv6 routers present [46743.224217] usb 1-1: new high speed USB device number 5 using ehci_hcd [46743.364623] scsi8 : usb-storage 1-1:1.0 [46744.366102] scsi 8:0:0:0: Direct-Access Amazon Kindle 0001 PQ: 0 ANSI: 2 [46744.366356] scsi: killing requests for dead queue [46744.372494] scsi: killing requests for dead queue [46744.384510] scsi: killing requests for dead queue [46744.392348] scsi: killing requests for dead queue [46744.392731] scsi: killing requests for dead queue [46744.396853] scsi: killing requests for dead queue [46744.397214] scsi: killing requests for dead queue [46744.400795] scsi: killing requests for dead queue [46744.401589] sd 8:0:0:0: Attached scsi generic sg2 type 0 [46744.407520] sd 8:0:0:0: [sdb] Attached SCSI removable disk And here are my mounted filesystems: jeff@prime:~$ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 298594984 174663712 108763480 62% / udev 1407684 4 1407680 1% /dev tmpfs 566924 896 566028 1% /run none 5120 0 5120 0% /run/lock none 1417308 300 1417008 1% /run/shm /home/jeff/.Private 298594984 174663712 108763480 62% /home/jeff I should note that, since I got Dropbox working on my Kindle, the usb is no longer strictly necessary, but as a matter of principle I'd love to get it working.

  Read the article

• How should I implement a command processing application?

  - by Nini Michaels

  I want to make a simple, proof-of-concept application (REPL) that takes a number and then processes commands on that number. Example: I start with 1. Then I write "add 2", it gives me 3. Then I write "multiply 7", it gives me 21. Then I want to know if it is prime, so I write "is prime" (on the current number - 21), it gives me false. "is odd" would give me true. And so on. Now, for a simple application with few commands, even a simple switch would do for processing the commands. But if I want extensibility, how would I need to implement the functionality? Do I use the command pattern? Do I build a simple parser/interpreter for the language? What if I want more complex commands, like "multiply 5 until >200" ? What would be an easy way to extend it (add new commands) without recompiling? Edit: to clarify a few things, my end goal would not be to make something similar to WolframAlpha, but rather a list (of numbers) processor. But I want to start slowly at first (on single numbers). I'm having in mind something similar to the way one would use Haskell to process lists, but a very simple version. I'm wondering if something like the command pattern (or equivalent) would suffice, or if I have to make a new mini-language and a parser for it to achieve my goals?

  Read the article

• What You Said: Cutting the Cable Cord

  - by Jason Fitzpatrick

  Earlier this week we asked you if you’d cut the cable and switched to alternate media sources to get your movie and TV fix. You responded and we’re back with a What You Said roundup. One of the recurrent themes in reader comments and one, we must admit, we didn’t expect to see with such prevalence, was the number of people who had ditched cable for over-the-air HD broadcasts. Fantasm writes: I have a triple HD antenna array, mounted on an old tv tower, each antenna facing out from a different side of the triangular tower. On tope of the tower are two 20+ year old antennas… I’m 60 miles from toronto and get 35 channels, most in brilliant HD… Anything else, comes from the Internet… Never want cable or sat again… Grant uses a combination of streaming services and, like Fantasm, manages to pull in HD content with a nice antenna setup: We use Netflix, Hulu Plus, Amazon Prime, Crackle, and others on a Roku as well as OTA on a Tivo Premier. The Tivo is simply the best DVR interface I have ever used. The Tivo Netflix application, though, is terrible, and it does not support Amazon Prime. Having both boxes makes it easy to use all of the services. 6 Ways Windows 8 Is More Secure Than Windows 7 HTG Explains: Why It’s Good That Your Computer’s RAM Is Full 10 Awesome Improvements For Desktop Users in Windows 8

  Read the article

• Rails: Law of Demeter Confusion

  - by user2158382

  I am reading a book called Rails AntiPatterns and they talk about using delegation to to avoid breaking the Law of Demeter. Here is their prime example: They believe that calling something like this in the controller is bad (and I agree) @street = @invoice.customer.address.street Their proposed solution is to do the following: class Customer has_one :address belongs_to :invoice def street address.street end end class Invoice has_one :customer def customer_street customer.street end end @street = @invoice.customer_street They are stating that since you only use one dot, you are not breaking the Law of Demeter here. I think this is incorrect, because you are still going through customer to go through address to get the invoice's street. I primarily got this idea from a blog post I read: http://www.dan-manges.com/blog/37 In the blog post the prime example is class Wallet attr_accessor :cash end class Customer has_one :wallet # attribute delegation def cash @wallet.cash end end class Paperboy def collect_money(customer, due_amount) if customer.cash < due_ammount raise InsufficientFundsError else customer.cash -= due_amount @collected_amount += due_amount end end end The blog post states that although there is only one dot customer.cash instead of customer.wallet.cash, this code still violates the Law of Demeter. Now in the Paperboy collect_money method, we don't have two dots, we just have one in "customer.cash". Has this delegation solved our problem? Not at all. If we look at the behavior, a paperboy is still reaching directly into a customer's wallet to get cash out. EDIT I completely understand and agree that this is still a violation and I need to create a method in Wallet called withdraw that handles the payment for me and that I should call that method inside the Customer class. What I don't get is that according to this process, my first example still violates the Law of Demeter because Invoice is still reaching directly into Customer to get the street. Can somebody help me clear the confusion. I have been searching for the past 2 days trying to let this topic sink in, but it is still confusing.

  Read the article

• Law of Demeter confusion [duplicate]

  - by user2158382

  This question already has an answer here: Rails: Law of Demeter Confusion 4 answers I am reading a book called Rails AntiPatterns and they talk about using delegation to to avoid breaking the Law of Demeter. Here is their prime example: They believe that calling something like this in the controller is bad (and I agree) @street = @invoice.customer.address.street Their proposed solution is to do the following: class Customer has_one :address belongs_to :invoice def street address.street end end class Invoice has_one :customer def customer_street customer.street end end @street = @invoice.customer_street They are stating that since you only use one dot, you are not breaking the Law of Demeter here. I think this is incorrect, because you are still going through customer to go through address to get the invoice's street. I primarily got this idea from a blog post I read: http://www.dan-manges.com/blog/37 In the blog post the prime example is class Wallet attr_accessor :cash end class Customer has_one :wallet # attribute delegation def cash @wallet.cash end end class Paperboy def collect_money(customer, due_amount) if customer.cash < due_ammount raise InsufficientFundsError else customer.cash -= due_amount @collected_amount += due_amount end end end The blog post states that although there is only one dot customer.cash instead of customer.wallet.cash, this code still violates the Law of Demeter. Now in the Paperboy collect_money method, we don't have two dots, we just have one in "customer.cash". Has this delegation solved our problem? Not at all. If we look at the behavior, a paperboy is still reaching directly into a customer's wallet to get cash out. Can somebody help me clear the confusion. I have been searching for the past 2 days trying to let this topic sink in, but it is still confusing.

  Read the article

• Rails: The Law of Demeter [duplicate]

  - by user2158382

  This question already has an answer here: Rails: Law of Demeter Confusion 4 answers I am reading a book called Rails AntiPatterns and they talk about using delegation to to avoid breaking the Law of Demeter. Here is their prime example: They believe that calling something like this in the controller is bad (and I agree) @street = @invoice.customer.address.street Their proposed solution is to do the following: class Customer has_one :address belongs_to :invoice def street address.street end end class Invoice has_one :customer def customer_street customer.street end end @street = @invoice.customer_street They are stating that since you only use one dot, you are not breaking the Law of Demeter here. I think this is incorrect, because you are still going through customer to go through address to get the invoice's street. I primarily got this idea from a blog post I read: http://www.dan-manges.com/blog/37 In the blog post the prime example is class Wallet attr_accessor :cash end class Customer has_one :wallet # attribute delegation def cash @wallet.cash end end class Paperboy def collect_money(customer, due_amount) if customer.cash < due_ammount raise InsufficientFundsError else customer.cash -= due_amount @collected_amount += due_amount end end end The blog post states that although there is only one dot customer.cash instead of customer.wallet.cash, this code still violates the Law of Demeter. Now in the Paperboy collect_money method, we don't have two dots, we just have one in "customer.cash". Has this delegation solved our problem? Not at all. If we look at the behavior, a paperboy is still reaching directly into a customer's wallet to get cash out. EDIT I completely understand and agree that this is still a violation and I need to create a method in Wallet called withdraw that handles the payment for me and that I should call that method inside the Customer class. What I don't get is that according to this process, my first example still violates the Law of Demeter because Invoice is still reaching directly into Customer to get the street. Can somebody help me clear the confusion. I have been searching for the past 2 days trying to let this topic sink in, but it is still confusing.

  Read the article

• How can I be certain that my code is flawless? [duplicate]

  - by David

  This question already has an answer here: Theoretically bug-free programs 5 answers I have just completed an exercise from my textbook which wanted me to write a program to check if a number is prime or not. I have tested it and seems to work fine, but how can I be certain that it will work for every prime number? public boolean isPrime(int n) { int divisor = 2; int limit = n-1 ; if (n == 2) { return true; } else { int mod = 0; while (divisor <= limit) { mod = n % divisor; if (mod == 0) { return false; } divisor++; } if (mod > 0) { return true; } } return false; } Note that this question is not a duplicate of Theoretically Bug Free Programs because that question asks about whether one can write bug free programs in the face of the the limitative results such as Turing's proof of the incomputability of halting, Rice's theorem and Godel's incompleteness theorems. This question asks how a program can be shown to be bug free.

  Read the article

• IE8: intense flickering for Flash in Windows 7 RTM

  - by 280Z28

  Whenever I view a page with Flash on it (example www.fox.com), if I move my mouse around the page flickers intensely - like siezure inducing flicker. Is this a known issue, and is there a way to fix it? Windows 7 RTM x64 IE8 Flash Player, Acrobat Reader, Shockwave Player are all I installed Consistent across 3 very different machines (AMD ZM-82 + Radeon HD3200 laptop, Core i7 + NVidia GT220 desktop, P4D + NVidia 6400GT desktop), but all with the above software.

  Read the article

• Do i need to join Graphics Card with CPU fan

  - by Mirage

  Initially i had inno 3d 256MB Nvidia GTS graphics card. I also had another Big FAN above the processor (Vendor put in quad core) In that card there was one cable which was joined with that FAN. Now i have changed the CARD to 1GB Nvidia GT9600 . But there is no pins to join the fan with that card. Is it ok . i don't know why old card was joined with FAN

  Read the article

• Cannot exit X server, restart, shutdown or drop to tty when VGA monitor active

  - by terdon

  I have a strange problem. If I connect an external VGA monitor to my laptop, exiting the X environment in any way crashes the computer. For example, say I am working with my two monitors (the laptop's and one connected to my VGA port) active. Hitting Ctrl+Alt+F Key should take me down to a tty. What actually happens is that the VGA screen goes blank, as you would expect, but the laptop screen, although still on, shows nothing. I know the screen is on because it is slightly more illuminated than when it is off. When in this state, I can do nothing to regain access to the machine. I have tried: Ctrl+F Key (and even Ctrl+Alt+F Key, just in case) combinations and none seem to have any effect. Ctrl+Alt+Del : Nothing Magic SysRq key: Nothing Blindly typing my username and password and trying to reboot/shutdown or restart GDM or MDM: Nothing The only thing that works is a hard reset. The exact same behavior occurs when kiling the X server through Ctrl+Alt+Backspace, rebooting or shutdown. There is no difference if I reboot/shutdown/log out using the WM's graphical menu or if I use the shutdown or rebootcommands. It is also not WM-dependent. I have the same problem using Cinnamon, Gnome 3, MATE and xfce4. It is, however, VGA dependent. I have tried connecting another VGA monitor and have the same problem. I do not, however, have this problem if a screen is connected to the DisplayPort. It is, therefore, a VGA specific issue. To make things even stranger, this only occurs when both screens are active. If either the laptop screen or the VGA monitor is inactive the problem goes away. Finally, this problem arose when I installed the latest Linux Mint Debian (LMDE). It did not occur with the previous release of LMDE. I am not sure what has changed since I used the same kernel version in both releases (I had upgraded the kernel while on the previous release) and, I think, the same nvidia drivers. Oh, and yes, I have updated the nvidia driver. Hardware: Dell M4500 laptop CPU: Intel Core i7 RAM: 8GB Graphics: nVidia GT216 [Quadro FX 880M] Software: LMDE, kernel 3.2.0-2-amd64 Xorg: 1.11.4 nVidia kernel: 295.20-1+3.2.9-1 Possibly relevant files: /var/log/Xorg.0.log ~/.xsession-errors Does anyone have any ideas how to fix this? Thanks in advance for any help.

  Read the article

• Intel GMA 4500MHD flickering in opengl

  - by Aaron

  I have an application that uses OpenGL for its display. When this application is run on a laptop with an Intel GMA 4500MHD on Windows XP the OpenGL content appears to flicker/shudder between 2 frames. I have experienced the exact same problem when running this application on nVidia Quadro FX hardware, however with nVidia the problem can be corrected by disabling the "Unified Back Buffer" (UBB) feature in the driver. Does anybody know how I can disable the corresponding feature in the Intel driver?

  Read the article

• Which is a better graphics card

  - by michael

  Hi, Can someone please give me advice regarding which of the following is a better graphics cards? Radeon HD4650 1GB NVIDIA Geforce GT240M 1GB Or which brand is better in general? Radeon? or Nvidia? Thank you.

  Read the article

• Ubuntu 10.04 says wired network disconnected, but it works

  - by mistily

  I've installed ubuntu 10.04, hoping to get rid of the 9.10 errors. (Nvidia driver didn't work quite properly, had some problems with clicking in flash, and I had -and still have- wired network working, but ubuntu said that it's disconnected) So the Nvidia driver is better now, but the network error is the same. I still have a working wired network connection, but when it starts says that it is disconnected. Notification area tells me the same thing. Why is that?

  Read the article

• Intel GMA 4500MHD flickering in opengl

  - by Aaron

  I have an application that uses OpenGL for its display. When this application is run on a laptop with an Intel GMA 4500MHD on Windows XP the OpenGL content appears to flicker/shudder between 2 frames. I have experienced the exact same problem when running this application on nVidia Quadro FX hardware, however with nVidia the problem can be corrected by disabling the "Unified Back Buffer" (UBB) feature in the driver. Does anybody know how I can disable the corresponding feature in the Intel driver?

  Read the article

• What hardware combonation is better one with a i7-720QM processor and GeForce 310M graphics or one w

  - by Mason

  I am looking for a new laptop and the two i am deciding between is an Asus with Intel® Core™ i5-430M processor and NVIDIA GeForce GTS 360M graphics. Or a Toshiba with the Intel® Core™ i7-720QM processor and NVIDIA GeForce 310M graphics. I am looking for a computer to use for college and be able to play games on. I want to know what one I should get they are both the same price.

  Read the article

• Windows 7 losing one of my displays after restart

  - by j_kubik

  I have an Intel DZ68BC motherboard with Intel HD graphics card using two monitors (on DVI and on HDMI » VGA). My friend asked me to test if his NVIDIA graphics card works well on my computer (at his it was doing some trouble), so I inserted it in my computer, installed the NVIDIA driver and it worked quite well. Then I removed it, uninstalled everything NVIDIA-related I could find and switched monitors back to my Intel card. Since then after every system start/restart, the system sees only monitor on HDMI » VGA connector, completely ignoring the DVI monitor. I noticed that installing the Intel video drivers causes the system to recognize the second monitor if I don't immediately reboot. After a reboot, the system recognizes only the HDMI » VGA monitor. I also tried starting in safe-mode and using DriveSweeper to remove the remains of NVIDIA drivers. While it seems that some drivers were removed, the situation didn't change. Now I am out of ideas and I really wouldn't like to reinstall the system (again...). I also tried restoring the system to the state before this whole story, but it also didn't change anything. EDIT: I am still trying to troubleshoot this problem. The only point that I could start was driver re-instalation. I traced down the part that restores right settings to a call: C:\Users\Jarek\Desktop\GFX_Win7_64_8.15.10.2696\x64\Drv64.exe -driverinf "C:\Users\Jarek\Desktop\GFX_Win7_64_8.15.10.2696\Graphics\igdlh64.inf" -flags 20 -keypath "Software\Intel\Difx64" This call fixes my displays, and as workaround, I will add it for now to my autorun. I am still looking for better solution anyway... EDIT2: Using DriverView i made a list of currently used drivers both before and after fixing my display using above command. Then i compared logs: No drivers were removed by fixing command. Drivers added by fixing command: MS Remote Access serial network driver (asyncmac.sys) security processor (spsys.sys) Drivers that changed base address (indicates driver-reload?) Canonical Display Driver (cdd.dll) Intel Graphics Kernel Mode Driver (igdkmd64.sys) Monitor Driver (monitor.sys) Added drivers seem rather unrelated to the problem to me, reloaded drivers are just a cnsequence of installing new driver file so there is not much to go here... I really cannot make heads or tails out of it...

  Read the article

• GPU Temperature comparisons between similar GPUs of the same line

  - by White Phoenix

  As a general rule of thumb, if there are two similar GPUs from the same line (i.e. an NVIDIA GTX 260 vs a NVIDIA GTX 280), will the less powerful or more powerful GPU run hotter? This is assuming all other factors stay the same - hardware configuration, cooling setup, ingame settings, etc. Or does this depend entirely upon the GPU itself? I do remember reading that the GTX 280 in this example was terribly inefficient with power and cooling.

  Read the article

• 12.04 Black screen with blinking cursor

  - by Junaid

  I have read this post My computer boots to a black screen, what options do I have to fix it? UBUNTU 12.04 works well with livecd but fails to start after complete installation, black screen with a blinking cursor. I tried holding shift key and edit grub options but holding shift did not do anything. I give up, any suggestion. I have built in intel graphics card and an nvidia card in PCI. I have tried by removing nvidia card as well. All I see is a black screen with a blinking cursor. My system is Dell optiplex GX260 with 1GB ram and 2.4 GHz P4 processor

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >