quirks mode - Page 48 - Developer IT

How many different ways are there to run a website?

- by symfony

Like cgi,but I don't know what it means exactly. Can someone list all the modes here and give a simple explanation what each mode means/differs

What does 'useLegacyV2RuntimeActivationPolicy' do in the .NET 4 config?

While converting a project that used SlimDX, and therefore has unmanaged code, to .NET 4.0 I ran into the following error: Mixed mode assembly is built against version 'v2.0.50727' of the runtime and cannot be loaded in the 4.0 runtime without additional configuration information. Googling around gave me the solution, which is to add this to the applications config: <configuration> <startup useLegacyV2RuntimeActivationPolicy="true"> <supportedRuntime version="v4.0"/> </startup> </configuration> My question is, what is the useLegacyV2RuntimeActivationPolicy doing? I can't find any documentation about it.

Read the article

XCOPY-deploying Microsoft Sync Framework in a no admin rights scenario (i.e. ClickOnce install)

- by Mike Bouck

I'm currently designing a smart client app (WPF) which needs to operate in an "occasionally disconnected" mode. For the offline scenario, I'm looking at using: Disconnected Service Agent Application Block (from the Smart Client Software Factory) Microsoft Sync Framework I should mention that I want my smart client app to be XCOPY-deployable, auto-updating, and installable without administrative privledges -- basically a ClickOnce-deployed app. From what I can tell this means the Microsoft Sync Framework is out because it has some COM in it's implementation that needs to get registered on the client which requires admin rights. Is it possible to XCOPY deploy and run MSF from a ClickOnce app? Any other ideas for data synchronization?

Read the article

Dynamically add a new row as Add in UITableView in edit mode?

- by David.Chu.ca

I have a table view with 0 or n rows of data from datastore. I added a customized Edit button on the right of the view's navigation bar. By default, when the edit button is clicked, in the action event, I set the view as edit mode: [self.tableView setEditing:YES animated:YES]; I would like to add a row at the end of the table view with Add button as an accessory on the left when the table view is in edit mode. And the "Add" row will not be displayed when the view is not in edit mode. This is very similar to the case of iPhon'e Contacts application when a contact is in edit mode. I am not sure if I need to add a row dynamically, and how if so? An alternative way I guess is to add more row when tableView:numberOfRowsInSection: is called? If later is the case, I have to make it hidden when the view is not in edit mode and visible when the view is in edit.

Read the article

elisp newbie question: Can't find 'filename' function definition in org.el?

- by Dave Paroulek

I really love org-mode in emacs and want to customize a few things. While reading thru org.el, I'm finding several references to filename but can't find filename using describe-function? I'm sure there's a simple answer, but I'm just learning elisp and it's not obvious. Any insight into where filename is defined? And/or if it's not a function, what is it? For example, filename on line 25502: (filename (if to-buffer (expand-file-name (concat (file-name-sans-extension (or (and subtree-p (org-entry-get (region-beginning) "EXPORT_FILE_NAME" t)) (file-name-nondirectory buffer-file-name))) "." html-extension) (file-name-as-directory (or pub-dir (org-export-directory :html opt-plist))))))

Read the article

JQuery returns wrong value for IE Compatibility

- by o-logn

Hey , I'm using JQuery and there seems to be a problem when I run IE in compatibility mode (and generally any IE less than version 8). I'm trying to use attr("value") for a button control. In IE8, and other browsers, this works fine and the result of this code: alert($(this).attr("value")); is simply the value of set in the button attribute (e.g. Home, Settings, Help etc..) However, when this is run in IE compatibility view, I get the entire HTML as the output value: <SPAN class=ui-button-text>Home</SPAN> This causes my checks to fail. Is there a way to return just the Home section across all browsers? Thanks

Read the article

How do I install Ubuntu 12.04 PPC on a PowerPC G4 from commands line or fix the graphical mode?

- by Gerardo Rodríguez

Good afternoon. I'm new to this Linux world so I hope someone can help me . I recently got a Mac as a gift, a PowerPC G4 , which has 1GB of RAM but came with no optical drive or hard drive. So I put a dvd burner and a hard drive of 40 GB I got. Then download an iso of Ubuntu 12.04 for PowerPC and burned onto a CD. I'm trying to install from Open Firmware ( as I haven't a Mac keyboard, I use one standard ) . Finally, the Installation CD boots , but on live mode and after the Ubuntu 12.04 screen I get a message that there is a problem with my graphics adapter but I can continue with minimal graphics and give me the command line . My question is that how do I install through a text or if there is any way to fix this problem to run the graphical mode and so can continue the installation of Ubuntu, and if once installed Ubuntu the problem will be fixed or what? I would appreciate if you help me , as I mentioned before, there is almost nothing of Ubuntu but I think it will be easier than trying to get the Mac OS X proper . Spend good.

Read the article

Website only displays correctly in IE using compatibility mode?

- by user21318

As the resident "IT Whiz" at work (ie: I know how to use a computer) I've been asked to develop a website for our small business. I've altered a wordpress theme for the time being and the company is very happy with the results. The only problem I am having with it at the moment is that for some reason the website does not display correctly and Internet Explorer unless I run it in Compatibility Mode. The main problem that I have is that my menu "slider" (it rotates pictures with links to articles etc) does not display at all, neither does the top menu they are just blink text based links. Even with Compatibility Mode enabled the slider and menus come back but the page is not centered unlike on both Firefox and Chrome. My googling has suggested the most common cause of this is old code but I'm not sure where to be looking. Is it likely in the css file or the actual php? Also any ideas on how to trouble shoot the cause of this? As in is there some dev tools or debugger I can use that would highlight "broken" code for me?

Read the article

How to require fullscreen mode in a jQTouch application?

- by Christopher Young

I'm using jQTouch to develop a version of a website optimized for safari on the iphone. The jQTouch demo helpfully shows how to show an "install this" message for users not using full screen mode and hide it for those who are. When in fullscreen mode, the body should have the class "fullscreen." So you can hide the "install this" message for people who have already added your app to their home page by adding this css rule to your stylesheet: body.fullscreen #home .info { display: none; } What I'd like to do is require users to use the app in fullscreen mode only. When viewed from the regular browser, they should only see a message asking them to install the app. That message should of course be hidden otherwise. This ought to be really, really easy, so I must just be missing something obvious. I thought one way to do this would be to simply test for the class "fullscreen" on the body: if it's not there, use goTo to get to another div, or hide the other divs, or something like that. Strangely, however, this doesn't work. As a test, I've still got the original "info" message, as in the jQTouch demo, and it doesn't show up when I launch in fullscreen mode. So the body must have the fullscreen class. And yet I can't find any other trace of it: when I put this alert to test things after the document has loaded, I get nothing when launching in fullscreen mode: alert($("body").attr("class")); I also thought I might test for fullscreen mode by checking for the value of the fullScreen boolean. But this doesn't seem to work either. What am I missing? What is the best way to do this?

Read the article

emacs: Can I set compilation-error-regexp-alist in a mode hook fn?

- by Cheeso

I am trying to set the compilation-error-regexp-alist in a function that I add as a mode hook. (defun cheeso-javascript-mode-fn () (turn-on-font-lock) ...bunch of other stuff ;; for JSLINT (make-local-variable 'compilation-error-regexp-alist) (setq compilation-error-regexp-alist '( ("^[ \t]*\$[A-Za-z.0-9_: \\-]+\$(\$[0-9]+\$[,]\$ *[0-9]+\$)\$ Microsoft JScript runtime error\\| JSLINT\$: \$.+\$$" 1 2 3) )) ;;(make-local-variable 'compile-command) (setq compile-command (let ((file (file-name-nondirectory buffer-file-name))) (concat "%windir%\\system32\\cscript.exe \\cheeso\\bin\\jslint.js " file))) ) (add-hook 'javascript-mode-hook 'cheeso-javascript-mode-fn) The mode hook runs. The various things I Set in the mode hook work. The compile-command gets set. But for some reason, the compilation-error-regexp-alist value doesn't take effect. If I later do a M-x describe-variable on compilation-error-regexp-alist, it shows me the value I think it should have. But .. the errors in the compilation buffer don't get highlighted, and M-x next-error does not work. If I add the error regexp value to the compilation-error-regexp-alist via setq-default, like this: (setq-default compilation-error-regexp-alist '( ... jslint regexp here ... ... many other regexp's here... )) ...then it works. The errors in the compilation buffer get properly highlighted and M-x next-error functions as expected.

Read the article

What is default javac source mode (assert as identifier compilation)?

- by waste

According to Orcale's Java7 assert guide: source mode 1.3 (default) — the compiler accepts programs that use assert as an identifier, but issues warnings. In this mode, programs are not permitted to use the assert statement. source mode 1.4 — the compiler generates an error message if the program uses assert as an identifier. In this mode, programs are permitted to use the assert statement. I wrote such class: package mm; public class ClassTest { public static void main(String[] arg) { int assert = 1; System.out.println(assert); } } It should compile fine if Oracle's info right (1.3 is default source mode). But I got errors like this: $ javac -version javac 1.7.0_04 $ javac -d bin src/mm/* src\mm\ClassTest.java:5: error: as of release 1.4, 'assert' is a keyword, and may not be used as an identifier int assert = 1; ^ (use -source 1.3 or lower to use 'assert' as an identifier) src\mm\ClassTest.java:6: error: as of release 1.4, 'assert' is a keyword, and may not be used as an identifier System.out.println(assert); ^ (use -source 1.3 or lower to use 'assert' as an identifier) 2 errors I added manually -source 1.3 and it issued warnings but compiled fine. It seems that Oracle's information is wrong and 1.3 is not default source mode. Which one is it then?

Read the article

ASP.NET: how can I compile in DEBUG mode?

- by Budda

AFAIK, usual ASP.NET web site/web application switched on into DEBUG mode when web/app-config setting "compilation" has debug="false". But I don't clearly understand how it works. Let's consider example: I have <compilation debug="true" />. I've added the following line into "Page_Load" method: System.Diagnostics.Debug.WriteLine("Page_Load"); When I launched web-site in 'debug' mode (using F5 button) It put me 'Page_Load' into output window. Everything is ok so far. When I change application compilation mode into non-debug: Will it recompile everything for 'non-debug' mode? Is this enough to go into "production" environment with this change only? I guess, it should be enough for web-site that doesn't use other project. Otherwise, I would better switch whole configuration into "Release" mode. In this case EACH project will be recompiled in "Release" mode. Am I right? Could you please point me if something is wrong here? Thanks a lot!

Read the article

Help debugging Sendmail/Mailman configuration issue

- by inxilpro

Hi folks, I'm trying to configure a server with Sendmail and Mailman. I've been getting "Broken pipe" errors for a while, and have slowly been debugging. I fixed some permission issues, and changed the user that Mailman expects to be called from, among other things. Finally, I'd gone through everything I could think of, so I added a new test to see if it's the Mailman script or Sendmail that's causing the problem. Here's the error I'm getting now (stripped of timestamps and identifying information): <-- MAIL FROM:[email protected] Authentication-Warning: xxxxx.org: xxxxxxxxxxxxxx.net [xx.xx.xxx.xxx] didn't use HELO protocol --- 250 2.1.0 [email protected]... Sender ok <-- RCPT TO: [email protected] --- 250 2.1.5 [email protected]... Recipient ok <-- DATA --- 354 Enter mail, end with "." on a line by itself [email protected], size=20, class=0, nrcpts=1, msgid=<[email protected]>, proto=SMTP, relay=xxxxxxxxxxxxxx.net [xx.xx.xxx.xxx] --- 250 2.0.0 o6KMg2xZ025804 Message accepted for delivery alias [email protected] => "|/bin/echo foo" SYSERR(root): putbody: write error: Broken pipe 0: fl=0x0, mode=20660: CHR: dev=0/15, ino=776, nlink=1, u/gid=0/0, size=0 1: fl=0x1, mode=20660: CHR: dev=0/15, ino=776, nlink=1, u/gid=0/0, size=0 2: fl=0x1, mode=20660: CHR: dev=0/15, ino=776, nlink=1, u/gid=0/0, size=0 3: fl=0x2, mode=140777: SOCK localhost->[[UNIX: /dev/log]] 5: fl=0x0, mode=100600: dev=8/3, ino=486765, nlink=1, u/gid=0/51, size=5 6: fl=0x8000, mode=100640: dev=8/3, ino=65501, nlink=1, u/gid=0/0, size=12288 7: fl=0x8000, mode=100640: dev=8/3, ino=65501, nlink=1, u/gid=0/0, size=12288 8: fl=0x8000, mode=100640: dev=8/3, ino=65510, nlink=1, u/gid=0/0, size=12288 9: fl=0x8000, mode=100640: dev=8/3, ino=65510, nlink=1, u/gid=0/0, size=12288 10: fl=0x8000, mode=100640: dev=8/3, ino=64814, nlink=1, u/gid=0/51, size=12288 11: fl=0x8000, mode=100640: dev=8/3, ino=64814, nlink=1, u/gid=0/51, size=12288 12: fl=0x1, mode=100600: dev=8/3, ino=486767, nlink=1, u/gid=0/51, size=754 13: fl=0x1, mode=10600: FIFO: dev=0/5, ino=7649785, nlink=1, u/gid=0/51, size=0 14: fl=0x0, mode=10600: FIFO: dev=0/5, ino=7649786, nlink=1, u/gid=0/51, size=0 MCI@0x0: NULL MCI@0x0: NULL to="|/bin/echo foo", [email protected] (8/0), delay=00:00:08, xdelay=00:00:00, mailer=prog, pri=30476, dsn=5.0.0, stat=Service unavailable o6KMsnxX025948: DSN: Service unavailable done; delay=00:00:08, ntries=1 The alias in /etc/aliases is: cmtest: "|/bin/echo foo" As you can see, even when trying to pipe to /bin/echo I still get the same error. But I can't for the life of me figure out what else to check. Normal aliases work fine. Any ideas? Thanks!

Read the article

"ERROR:Could not find java.nio.file.Paths" when using Oracle JDK 1.7

- by Ankit

I want to try out some features rolled out in Oracle's new JDK 1.7. I followed the post:- Oracle JDK 1.7 but the post doesn't seem to help. I was trying to fetch out the structure for java.nio.file.Paths class file but got the following error:- buffer@ankit:~$ javap java.nio.file.Paths ERROR:Could not find java.nio.file.Paths However i can easily get the information about class structures till JAVA SE 1.6, here is an example:- buffer@ankit:~$ javap java.lang.Object Compiled from "Object.java" public class java.lang.Object{ public java.lang.Object(); public final native java.lang.Class getClass(); public native int hashCode(); public boolean equals(java.lang.Object); protected native java.lang.Object clone() throws java.lang.CloneNotSupportedException; public java.lang.String toString(); public final native void notify(); public final native void notifyAll(); public final native void wait(long) throws java.lang.InterruptedException; public final void wait(long, int) throws java.lang.InterruptedException; public final void wait() throws java.lang.InterruptedException; protected void finalize() throws java.lang.Throwable; static {}; } Running java -version gives the following result:- buffer@ankit:~$ java -version java version "1.7.0_09" Java(TM) SE Runtime Environment (build 1.7.0_09-b05) Java HotSpot(TM) 64-Bit Server VM (build 23.5-b02, mixed mode) SYSTEM INFORMATION buffer@ankit:~$ sudo update-alternatives --config java [sudo] password for buffer: There are 4 choices for the alternative java (providing /usr/bin/java). Selection Path Priority Status ------------------------------------------------------------ 0 /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/java 1061 auto mode 1 /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/java 1061 manual mode 2 /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/java 1051 manual mode 3 /usr/lib/jvm/jdk1.7.0_09/ 1 manual mode * 4 /usr/lib/jvm/jdk1.7.0_09/bin/java 1 manual mode buffer@ankit:~$ sudo update-alternatives --config javac There are 2 choices for the alternative javac (providing /usr/bin/javac). Selection Path Priority Status ------------------------------------------------------------ 0 /usr/lib/jvm/java-6-openjdk-amd64/bin/javac 1061 auto mode 1 /usr/lib/jvm/java-6-openjdk-amd64/bin/javac 1061 manual mode * 2 /usr/lib/jvm/jdk1.7.0_09/bin/javac 1 manual mode buffer@ankit:~$ sudo update-alternatives --config javaws There are 3 choices for the alternative javaws (providing /usr/bin/javaws). Selection Path Priority Status ------------------------------------------------------------ 0 /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/javaws 1061 auto mode 1 /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/javaws 1061 manual mode 2 /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/javaws 1060 manual mode * 3 /usr/lib/jvm/jdk1.7.0_09/bin/javaws 1 manual mode The directory structure of /usr/lib/jvm/ is as follows:- buffer@ankit:~$ ls -l /usr/lib/jvm/ total 24 lrwxrwxrwx 1 root root 24 Dec 2 2011 default-java -> java-1.6.0-openjdk-amd64 drwxr-xr-x 4 root root 4096 Nov 8 16:24 java-1.5.0-gcj-4.6 lrwxrwxrwx 1 root root 24 Dec 2 2011 java-1.6.0-openjdk -> java-1.6.0-openjdk-amd64 lrwxrwxrwx 1 root root 20 Oct 25 00:01 java-1.6.0-openjdk-amd64 -> java-6-openjdk-amd64 lrwxrwxrwx 1 root root 20 Oct 25 06:59 java-1.7.0-openjdk-amd64 -> java-7-openjdk-amd64 lrwxrwxrwx 1 root root 24 Dec 2 2011 java-6-openjdk -> java-1.6.0-openjdk-amd64 drwxr-xr-x 7 root root 4096 Nov 8 16:24 java-6-openjdk-amd64 drwxr-xr-x 3 root root 4096 Nov 8 16:24 java-6-openjdk-common drwxr-xr-x 5 root root 4096 Nov 8 05:48 java-7-openjdk-amd64 drwxr-xr-x 3 root root 4096 Nov 8 05:48 java-7-openjdk-common drwxr-xr-x 8 buffer buffer 4096 Sep 25 09:08 jdk1.7.0_09 Any help would be highly appreciated.

Read the article

EPM 11.1.2 - Configure a data source to support Essbase failover in active-passive clustering mode

- by Ahmed A

To configure a data source to support Essbase fail-over in active-passive clustering mode, replace the Essbase Server name value with the APS URL followed by the Essbase cluster name; for example, if the APS URL is http://<hostname>:13090/aps and the Essbase cluster name is EssbaseCluster-1, then the value in the Essbase Server name field would be:http://<hostname>:13090/aps/Essbase?clusterName=EssbaseCluster-1Note: Entering the Essbase cluster name without the APS URL in the Essbase Server name field is not supported in this release.

Read the article

Emacs column editing CUA mode - is it possible to select rectangular region with mouse?

- by MountainX

Rectangular or column editing is possible in emacs. And it is very easy with cua-mode enabled. Here are my references for this: Here's a video that shows how to do it: http://vimeo.com/1168225 And see section "CUA rectangle support" here: http://www.cua.dk/cua.html But I also wonder if I can do it with the mouse. I want to select the rectangular region entirely with the mouse (like Scite or Geany can do). Is that possible in emacs?

Read the article

How to create Custom ListForm WebPart

- by DipeshBhanani

Mostly all who works extensively on SharePoint (including meJ) don’t like to use out-of-box list forms (DispForm.aspx, EditForm.aspx, NewForm.aspx) as interface. Actually these OOB list forms bind hands of developers for the customization. It gives headache to developers to add just one post back event, for a dropdown field and to populate other fields in NewForm.aspx or EditForm.aspx. On top of that clients always ask such stuff. So here I am going to give you guys a flight for SharePoint Customization world. In this blog, I will explain, how to create CustomListForm WebPart. In my next blogs, I am going to explain easy deployment of List Forms through features and last, guidance on using SharePoint web controls. 1. First thing, create a class library project through Visual Studio and inherit the class with WebPart class. public class CustomListForm : WebPart 2. Declare the public variables and properties which we are going to use throughout the class. You will get to know these once you see them in use. #region "Variable Declaration" Table spTableCntl; FormToolBar formToolBar; Literal ltAlertMessage; Guid SiteId; Guid ListId; int ItemId; string ListName; #endregion #region "Properties" SPControlMode _ControlMode = SPControlMode.New; [Personalizable(PersonalizationScope.Shared), WebBrowsable(true), WebDisplayName("Control Mode"), WebDescription("Set Control Mode"), DefaultValue(""), Category("Miscellaneous")] public SPControlMode ControlMode { get { return _ControlMode; } set { _ControlMode = value; } } #endregion The property “ControlMode” is used to identify the mode of the List Form. The property is of type SPControlMode which is an enum type with values (Display, Edit, New and Invalid). When we will add this WebPart to DispForm.aspx, EditForm.aspx and NewForm.aspx, we will set the WebPart property “ControlMode” to Display, Edit and New respectively. 3. Now, we need to override the CreateChildControl method and write code to manually add SharePoint Web Controls related to each list fields as well as ToolBar controls. protected override void CreateChildControls() { base.CreateChildControls(); try { SiteId = SPContext.Current.Site.ID; ListId = SPContext.Current.ListId; ListName = SPContext.Current.List.Title; if (_ControlMode == SPControlMode.Display || _ControlMode == SPControlMode.Edit) ItemId = SPContext.Current.ItemId; SPSecurity.RunWithElevatedPrivileges(delegate() { using (SPSite site = new SPSite(SiteId)) { //creating a new SPSite with credentials of System Account using (SPWeb web = site.OpenWeb()) { //<Custom Code for creating form controls> } } }); } catch (Exception ex) { ShowError(ex, "CreateChildControls"); } } Here we are assuming that we are developing this WebPart to plug into List Forms. Hence we will get the List Id and List Name from the current context. We can have Item Id only in case of Display and Edit Mode. We are putting our code into “RunWithElevatedPrivileges” to elevate privileges to System Account. Now, let’s get deep down into the main code and expand “//<Custom Code for creating form controls>”. Before initiating any SharePoint control, we need to set context of SharePoint web controls explicitly so that it will be instantiated with elevated System Account user. Following line does the job. //To create SharePoint controls with new web object and System Account credentials SPControl.SetContextWeb(Context, web); First thing, let’s add main table as container for all controls. //Table to render webpart Table spTableMain = new Table(); spTableMain.CellPadding = 0; spTableMain.CellSpacing = 0; spTableMain.Width = new Unit(100, UnitType.Percentage); this.Controls.Add(spTableMain); Now we need to add Top toolbar with Save and Cancel button at top as you see in the below screen shot. // Add Row and Cell for Top ToolBar TableRow spRowTopToolBar = new TableRow(); spTableMain.Rows.Add(spRowTopToolBar); TableCell spCellTopToolBar = new TableCell(); spRowTopToolBar.Cells.Add(spCellTopToolBar); spCellTopToolBar.Width = new Unit(100, UnitType.Percentage); ToolBar toolBarTop = (ToolBar)Page.LoadControl("/_controltemplates/ToolBar.ascx"); toolBarTop.CssClass = "ms-formtoolbar"; toolBarTop.ID = "toolBarTbltop"; toolBarTop.RightButtons.SeparatorHtml = "<td class=ms-separator> </td>"; if (_ControlMode != SPControlMode.Display) { SaveButton btnSave = new SaveButton(); btnSave.ControlMode = _ControlMode; btnSave.ListId = ListId; if (_ControlMode == SPControlMode.New) btnSave.RenderContext = SPContext.GetContext(web); else { btnSave.RenderContext = SPContext.GetContext(this.Context, ItemId, ListId, web); btnSave.ItemContext = SPContext.GetContext(this.Context, ItemId, ListId, web); btnSave.ItemId = ItemId; } toolBarTop.RightButtons.Controls.Add(btnSave); } GoBackButton goBackButtonTop = new GoBackButton(); toolBarTop.RightButtons.Controls.Add(goBackButtonTop); goBackButtonTop.ControlMode = SPControlMode.Display; spCellTopToolBar.Controls.Add(toolBarTop); Here we have use “SaveButton” and “GoBackButton” which are internal SharePoint web controls for save and cancel functionality. I have set some of the properties of Save Button with if-else condition because we will not have Item Id in case of New Mode. Item Id property is used to identify which SharePoint List Item need to be saved. Now, add Form Toolbar to the page which contains “Attach File”, “Delete Item” etc buttons. // Add Row and Cell for FormToolBar TableRow spRowFormToolBar = new TableRow(); spTableMain.Rows.Add(spRowFormToolBar); TableCell spCellFormToolBar = new TableCell(); spRowFormToolBar.Cells.Add(spCellFormToolBar); spCellFormToolBar.Width = new Unit(100, UnitType.Percentage); FormToolBar formToolBar = new FormToolBar(); formToolBar.ID = "formToolBar"; formToolBar.ListId = ListId; if (_ControlMode == SPControlMode.New) formToolBar.RenderContext = SPContext.GetContext(web); else { formToolBar.RenderContext = SPContext.GetContext(this.Context, ItemId, ListId, web); formToolBar.ItemContext = SPContext.GetContext(this.Context, ItemId, ListId, web); formToolBar.ItemId = ItemId; } formToolBar.ControlMode = _ControlMode; formToolBar.EnableViewState = true; spCellFormToolBar.Controls.Add(formToolBar); The ControlMode property will take care of which button to be displayed on the toolbar. E.g. “Attach files”, “Delete Item” in new/edit forms and “New Item”, “Edit Item”, “Delete Item”, “Manage Permissions” etc in display forms. Now add main section which contains form field controls. //Create Form Field controls and add them in Table "spCellCntl" CreateFieldControls(web); //Add public variable "spCellCntl" containing all form controls to the page spRowCntl.Cells.Add(spCellCntl); spCellCntl.Width = new Unit(100, UnitType.Percentage); spCellCntl.Controls.Add(spTableCntl); //Add a Blank Row with height of 5px to render space between ToolBar table and Control table TableRow spRowLine1 = new TableRow(); spTableMain.Rows.Add(spRowLine1); TableCell spCellLine1 = new TableCell(); spRowLine1.Cells.Add(spCellLine1); spCellLine1.Height = new Unit(5, UnitType.Pixel); spCellLine1.Controls.Add(new LiteralControl("<IMG SRC='/_layouts/images/blank.gif' width=1 height=1 alt=''>")); //Add Row and Cell for Form Controls Section TableRow spRowCntl = new TableRow(); spTableMain.Rows.Add(spRowCntl); TableCell spCellCntl = new TableCell(); //Create Form Field controls and add them in Table "spCellCntl" CreateFieldControls(web); //Add public variable "spCellCntl" containing all form controls to the page spRowCntl.Cells.Add(spCellCntl); spCellCntl.Width = new Unit(100, UnitType.Percentage); spCellCntl.Controls.Add(spTableCntl); TableRow spRowLine2 = new TableRow(); spTableMain.Rows.Add(spRowLine2); TableCell spCellLine2 = new TableCell(); spRowLine2.Cells.Add(spCellLine2); spCellLine2.CssClass = "ms-formline"; spCellLine2.Controls.Add(new LiteralControl("<IMG SRC='/_layouts/images/blank.gif' width=1 height=1 alt=''>")); // Add Blank row with height of 5 pixel TableRow spRowLine3 = new TableRow(); spTableMain.Rows.Add(spRowLine3); TableCell spCellLine3 = new TableCell(); spRowLine3.Cells.Add(spCellLine3); spCellLine3.Height = new Unit(5, UnitType.Pixel); spCellLine3.Controls.Add(new LiteralControl("<IMG SRC='/_layouts/images/blank.gif' width=1 height=1 alt=''>")); You can add bottom toolbar also to get same look and feel as OOB forms. I am not adding here as the blog will be much lengthy. At last, you need to write following lines to allow unsafe updates for Save and Delete button. // Allow unsafe update on web for save button and delete button if (this.Page.IsPostBack && this.Page.Request["__EventTarget"] != null && (this.Page.Request["__EventTarget"].Contains("IOSaveItem") || this.Page.Request["__EventTarget"].Contains("IODeleteItem"))) { SPContext.Current.Web.AllowUnsafeUpdates = true; } So that’s all. We have finished writing Custom Code for adding field control. But something most important is skipped. In above code, I have called function “CreateFieldControls(web);” to add SharePoint field controls to the page. Let’s see the implementation of the function: private void CreateFieldControls(SPWeb pWeb) { SPList listMain = pWeb.Lists[ListId]; SPFieldCollection fields = listMain.Fields; //Main Table to render all fields spTableCntl = new Table(); spTableCntl.BorderWidth = new Unit(0); spTableCntl.CellPadding = 0; spTableCntl.CellSpacing = 0; spTableCntl.Width = new Unit(100, UnitType.Percentage); spTableCntl.CssClass = "ms-formtable"; SPContext controlContext = SPContext.GetContext(this.Context, ItemId, ListId, pWeb); foreach (SPField listField in fields) { string fieldDisplayName = listField.Title; string fieldInternalName = listField.InternalName; //Skip if the field is system field or hidden if (listField.Hidden || listField.ShowInVersionHistory == false) continue; //Skip if the control mode is display and field is read-only if (_ControlMode != SPControlMode.Display && listField.ReadOnlyField == true) continue; FieldLabel fieldLabel = new FieldLabel(); fieldLabel.FieldName = listField.InternalName; fieldLabel.ListId = ListId; BaseFieldControl fieldControl = listField.FieldRenderingControl; fieldControl.ListId = ListId; //Assign unique id using Field Internal Name fieldControl.ID = string.Format("Field_{0}", fieldInternalName); fieldControl.EnableViewState = true; //Assign control mode fieldLabel.ControlMode = _ControlMode; fieldControl.ControlMode = _ControlMode; switch (_ControlMode) { case SPControlMode.New: fieldLabel.RenderContext = SPContext.GetContext(pWeb); fieldControl.RenderContext = SPContext.GetContext(pWeb); break; case SPControlMode.Edit: case SPControlMode.Display: fieldLabel.RenderContext = controlContext; fieldLabel.ItemContext = controlContext; fieldLabel.ItemId = ItemId; fieldControl.RenderContext = controlContext; fieldControl.ItemContext = controlContext; fieldControl.ItemId = ItemId; break; } //Add row to display a field row TableRow spCntlRow = new TableRow(); spTableCntl.Rows.Add(spCntlRow); //Add the cells for containing field lable and control TableCell spCellLabel = new TableCell(); spCellLabel.Width = new Unit(30, UnitType.Percentage); spCellLabel.CssClass = "ms-formlabel"; spCntlRow.Cells.Add(spCellLabel); TableCell spCellControl = new TableCell(); spCellControl.Width = new Unit(70, UnitType.Percentage); spCellControl.CssClass = "ms-formbody"; spCntlRow.Cells.Add(spCellControl); //Add the control to the table cells spCellLabel.Controls.Add(fieldLabel); spCellControl.Controls.Add(fieldControl); //Add description if there is any in case of New and Edit Mode if (_ControlMode != SPControlMode.Display && listField.Description != string.Empty) { FieldDescription fieldDesc = new FieldDescription(); fieldDesc.FieldName = fieldInternalName; fieldDesc.ListId = ListId; spCellControl.Controls.Add(fieldDesc); } //Disable Name(Title) in Edit Mode if (_ControlMode == SPControlMode.Edit && fieldDisplayName == "Name") { TextBox txtTitlefield = (TextBox)fieldControl.Controls[0].FindControl("TextField"); txtTitlefield.Enabled = false; } } fields = null; } First of all, I have declared List object and got list fields in field collection object called “fields”. Then I have added a table for the container of all controls and assign CSS class as "ms-formtable" so that it gives consistent look and feel of SharePoint. Now it’s time to navigate through all fields and add them if required. Here we don’t need to add hidden or system fields. We also don’t want to display read-only fields in new and edit forms. Following lines does this job. //Skip if the field is system field or hidden if (listField.Hidden || listField.ShowInVersionHistory == false) continue; //Skip if the control mode is display and field is read-only if (_ControlMode != SPControlMode.Display && listField.ReadOnlyField == true) continue; Let’s move to the next line of code. FieldLabel fieldLabel = new FieldLabel(); fieldLabel.FieldName = listField.InternalName; fieldLabel.ListId = ListId; BaseFieldControl fieldControl = listField.FieldRenderingControl; fieldControl.ListId = ListId; //Assign unique id using Field Internal Name fieldControl.ID = string.Format("Field_{0}", fieldInternalName); fieldControl.EnableViewState = true; //Assign control mode fieldLabel.ControlMode = _ControlMode; fieldControl.ControlMode = _ControlMode; We have used “FieldLabel” control for displaying field title. The advantage of using Field Label is, SharePoint automatically adds red star besides field label to identify it as mandatory field if there is any. Here is most important part to understand. The “BaseFieldControl”. It will render the respective web controls according to type of the field. For example, if it’s single line of text, then Textbox, if it’s look up then it renders dropdown. Additionally, the “ControlMode” property tells compiler that which mode (display/edit/new) controls need to be rendered with. In display mode, it will render label with field value. In edit mode, it will render respective control with item value and in new mode it will render respective control with empty value. Please note that, it’s not always the case when dropdown field will be rendered for Lookup field or Choice field. You need to understand which controls are rendered for which list fields. I am planning to write a separate blog which I hope to publish it very soon. Moreover, we also need to assign list field specific properties like List Id, Field Name etc to identify which SharePoint List field is attached with the control. switch (_ControlMode) { case SPControlMode.New: fieldLabel.RenderContext = SPContext.GetContext(pWeb); fieldControl.RenderContext = SPContext.GetContext(pWeb); break; case SPControlMode.Edit: case SPControlMode.Display: fieldLabel.RenderContext = controlContext; fieldLabel.ItemContext = controlContext; fieldLabel.ItemId = ItemId; fieldControl.RenderContext = controlContext; fieldControl.ItemContext = controlContext; fieldControl.ItemId = ItemId; break; } Here, I have separate code for new mode and Edit/Display mode because we will not have Item Id to assign in New Mode. We also need to set CSS class for cell containing Label and Controls so that those controls get rendered with SharePoint theme. spCellLabel.CssClass = "ms-formlabel"; spCellControl.CssClass = "ms-formbody"; “FieldDescription” control is used to add field description if there is any. Now it’s time to add some more customization, //Disable Name(Title) in Edit Mode if (_ControlMode == SPControlMode.Edit && fieldDisplayName == "Name") { TextBox txtTitlefield = (TextBox)fieldControl.Controls[0].FindControl("TextField"); txtTitlefield.Enabled = false; } The above code will disable the title field in edit mode. You can add more code here to achieve more customization according to your requirement. Some of the examples are as follow: //Adding post back event on UserField to auto populate some other dependent field //in new mode and disable it in edit mode if (_ControlMode != SPControlMode.Display && fieldDisplayName == "Manager") { if (fieldControl.Controls[0].FindControl("UserField") != null) { PeopleEditor pplEditor = (PeopleEditor)fieldControl.Controls[0].FindControl("UserField"); if (_ControlMode == SPControlMode.New) pplEditor.AutoPostBack = true; else pplEditor.Enabled = false; } } //Add JavaScript Event on Dropdown field. Don't forget to add the JavaScript function on the page. if (_ControlMode == SPControlMode.Edit && fieldDisplayName == "Designation") { DropDownList ddlCategory = (DropDownList)fieldControl.Controls[0]; ddlCategory.Attributes.Add("onchange", string.Format("javascript:DropdownChangeEvent('{0}');return false;", ddlCategory.ClientID)); } Following are the screenshots of my Custom ListForm WebPart. Let’s play a game, check out your OOB List forms of SharePoint, compare with these screens and find out differences. DispForm.aspx: EditForm.aspx: NewForm.aspx: Enjoy the SharePoint Soup!!!

Read the article

How to boot Chromebook from SD card without entering developer mode?

- by Caleb Strutz

I have a question. Is it at all possible to install Ubuntu or Chrubuntu onto a SD Card and then boot a chromebook from said SD card? I know this is easily possible, but the chromebook in question belongs to my school, so I cannot enter developer mode, because that would void the license agreement. I don't really care how technical or how many steps this will take, as long as it can be possible. Thanks in advance.

Read the article

Google ajoute le mode hors-ligne à ses Maps sous Android et apporte trois autres améliorations à son service de cartographie

Google ajoute le mode hors-ligne à ses Maps sous Android Et apporte trois autres améliorations à son service de cartographie Edit du 07/06/2012, 12h par Gordon Fowler Brian McClendon, Vice-Président en charge de Google Maps, a dévoilé 3 grandes nouveautés dans Google Maps, principalement liées au mobile. Parmi ces nouveautés on trouve Google Maps Offline qui permet d'accéder à Google Maps hors-connexion pour les utilisateurs sous Android dans plus d'une centaine de pays d'ici à quelques semaines !

Read the article

why my ubuntu always runs on low-grahphic mode?

- by sam

My graphic card is NVIDIA GTX 460, and ubuntu is ubuntu 10.04. I have reinstalled graphic driver for two times,but my ubuntu shows that it runs on low-graphic mode after a period of time of driver installation process. The following is the information the computer shows. http://imgur.com/GkZUz Also, when I try to change the graphic setting of NVIDIA on ubuntu, the following information shows. http://imgur.com/SVhCc How to fix it?Thank you!!

Read the article

Fallback Mode on Intel HD 4000 on Ubuntu 12.04.1?

- by caragh

Just built a system w/ a ivy bridge CPU (Xeon E3-1245 v2) with Intel HD 4000 onboard graphics, board is an Asrock H77 ProM. I had loaded Ubuntu server 12.04.1 onto it, but wanted to fool around w/ gnome 3. I installed gnome-shell, which didn't work, then gnome, which did, but only loads on fallback mode - the video is recognized as "VESA: sandy/ivy bridge graphics" I tried installing the whole ubuntu-desktop shebang but it's still in fallback graphics. Any way to get the full eye candy?

Read the article

How can I setup a Proxy I can sniff traffic from using an ESX vswitch in promiscuous mode?

- by sandroid

I have a pretty specific requirement, detailed below. Here's what I'm not looking for help for, to keep things tidy and on topic: How to configure a standard proxy Any ESX setup required to facilitate traffic sniffing How to sniff traffic Any changes in design (my scope limits me) I need to setup a test environment for a network-sniffing based HTTP app monitoring tool, and I need to troubleshoot a client issue but he only has a prod network, so making changes to the config on client's system "just to try" is costly. The goal here is to create a similar system in my lab, and hit the client's webapp and redirect my traffic - using a proxy - into the lab environment. The reason I want to use a proxy is so that only this specific traffic is redirected for all to see, and not all my web traffic (like my visits to serverfault :P). Everything will run inside an ESX 4.1 machine. In there, there is a traffic collection vswitch in promiscuous mode that is not on the local network for security reasons. The VM containing our listening agent is connected to this vswitch. On the same ESX host, I will setup a basic linux server and install a proxy (either apache + mod_proxy or squid, doesn't matter). I'm looking for ideas on how to deploy this for my needs so I can then figure out how to set it up accordingly. Some ideas I've had were to setup two proxies, and have them talk to eachother through this vswitch in promiscuous mode, but it seems like alot of work. Another idea is a dual-homed proxy, but I've never seen/done that before so I'm not sure how doable it is for what I'd like. I am OK with setting up a second vswitch in promiscuous mode to facilitate this if need be, but I cannot put the vswitch on the lan (which is used so my browser would communicate with the proxy) in promiscuous mode. Any ideas are welcome.

Read the article

Office 15 Technical Preview : Lync, accès à SkyDrive, Messenger et nouveau mode plein écran pour la version Metro

Office 15 Technical Preview : la version Metro intègre Lync permet un accès à SkyDrive, Messenger et dispose d'un nouveau mode plein écran Mise à jour du 19/03/2012, par Hinault Romaric En fin du mois de janvier dernier, Microsoft a procédé à une évaluation technique confidentielle d'Office 15, la prochaine génération de services Cloud et de produits de la ligne Office, avec un groupe resserré de clients. Une fuite de la version utilisée pour ce programme d'évaluation vient révéler quelques caractéristiques de la suite bureautique. Le blogueur Paul Thurrott a exploré les fonctionnalités et améliorations d...

Read the article

Reasons for Ajax navigation breaking on Coldfusion/Apache when running an app in iOS fullscreen mode? [closed]

- by frequent

Not sure if this belongs to SO or here. I'm running a webApp using jquery, jquerymobile, requireJS and apache, coldfusion8, mysql 5.0.88 serverside. The app works fine until I try to run it in fullscreen mode on iOS (add icon to homescreen, launch app from there with <meta name="apple-mobile-web-app-capable" content="yes" /> specified). This meta tag will break the Jquery Mobile AJAX navigation. The AJAX request will fail and the requested page will be loaded as a new page, thereby restarting the app on every page change. I have chased this through the whole front end starting from requireJS through Jquery Mobiles AJAX navigation down to the AJAX request being made in Jquery. xhr.send( ( s.hasContent && s.data ) || null ); In regular browser this works no problem. In fullscreen mode, this fails (readystate=0, empty response). I have found this article, which argues that fullscreen mode is like a browser instance with different HTTP strings. On ASP.net this results in the browser not being identified by the server and only basic browser settings being assumed (e.g. no Javascript). I'm a little lost where to start looking for possible reasons serverside. I have not written any server code for handling Ajax page navigation, so this must be something that is handled out of the box by Coldfusion or Apache? Question: Where could I start looking for problable causes of fullscreen mode breaking AJAX navigation if I assume Coldfusion or Apache are the culprits? Is there a setting I'm missing in httpd.config? What else could be the problem? Thanks for inputs!

Read the article

How to change RDS licensing mode from 'per user/device' to 'Remote control for administrators' on Wi

- by Prashant Mandhare

We have installed windows 2008 R2 enterprise on a Dell server. This server is placed remotely in data center and only administrator is going to access it for maintenance purpose. No multiple users or client remote access is needed Now during 'remote desktop services' role installation network admin accidentally selected 'per user/device' licensing mode. Because of which now 120 days free try period is ticking. Since only administrator is going to access this server remotely we need to have 'Remote control for administrators' licensing mode (like windows 2003) on it. How we can change licensing mode from 'per user/device' to 'Remote control for administrators' on 2008 server? Also will it be possible to do this change remotely using RDC session itself? or do i need to change it using physical console (if remote access is gonna be disabled during switch)?

Search Results

Search found 11229 results on 450 pages for 'quirks mode'.

Page 48/450 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55 | Next Page >

- by symfony

- by Cameron MacFarland

- by Mike Bouck

- by David.Chu.ca

- by Dave Paroulek

- by o-logn

- by Gerardo Rodríguez

- by user21318

- by Christopher Young

- by Cheeso

- by waste

- by Budda

- by inxilpro

- by Ankit

- by Ahmed A

- by MountainX

- by DipeshBhanani

- by Caleb Strutz

- by sam

- by caragh

- by sandroid

- by frequent

- by Prashant Mandhare

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55 | Next Page >