Search Results

Search found 2453 results on 99 pages for 'recovery'.

Page 48/99 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• Can't install Ubuntu on Asus Eee 1015pem

  - by Peter

  I'm having trouble to install Ubuntu. I use a ASUS Eee 1015pem netbook. Recently, I my netbook got wet. I had it inside my backback and all my things got wet. The netbook boots up fine but it will not load the OS. I downloaded ubuntu onto my external hard drive and changed the settings in my Bios to boot from a removable device. Nothing happens. When I plug in my external hard drive I'm not able to get to the boot icon. I have to unplug it the external hard drive. Set my boot settings I tried both Removable and CD-Rom. Than I plug my external drive back in and nothing happens on either settings. My Asus never came with a recovery disk and suppose to have a build in recovery by pressing F9 in the Bios. Also I need to disable Boot Booster in Bios and Boot Booster is not even an opition in Bios. My friend told me try installing Ubuntu but now I'm having no luck with Ubuntu. Any suggestions?

  Read the article

• How to recover bad encripted directory

  - by Fato Alessandro

  I had a problem while formatting Ubuntu. I tried to reinstall without formatting the home directory and with the same username. The home directory of the new installation was set to be encrypted. Then the installation went wrong because of the cd. So it really never started (stopped at coping stage). How ever Ubuntu did encrypted the home directory but probably the procedure went wrong. By now I installed Ubuntu in another partition, tried to mount with encrypted-recovery but the mounted directory in tmp wasn't the directory I had before. There were just strange directories with coded name. Strange fact is that the file system is not damaged: it continues to know how much data is actually stored in it. If I look with gparted or even nautilus I see 45 Gb of data present on the partition. This let me think that my data are not erased but maybe hidden. Moreover when I tried to mount the encrypted home directory with encrypted-recovery-personal it asked me the encryption secret. I insert nothing, just pressed enter, and the password was accepted. Is thre a method for removing my data? Maybe trying to rencrypt the directory? How could I get back to the previous documents. Thanks to everyone

  Read the article

• Cannot boot computer, help please :(

  - by Austin

  Ok so here is more descriptions, I REALLY NEED HELP! I installed Ubuntu on a disk (unsure of v. I can't check.. Computer is broke :/ ) I then burned the disk I restarted computer pressed f12 blah blah it came up, I pressed enter for English, I plugged an Ethernet card in for better connection, and then started the installation.... I did the basics, and I entered a host name, and a user name and pass all that, when it came to partition page, I presse enter for no and then it went back to the installation page, I pressed install again, and it brought me back, so I selected yes , it loaded an it asked what software to instal I selected sh ( it was first option and I didn't know which to do ) so after everything finished loading, my disk was ejected the process finish, I run my computer and it opens up in log in page on cmd script I didn't know it, so I ran disk again makin a user and pass to remember.... Going back to login thing I logged in, and all it did was say my username... I didn't know what to do from there, I looked online found nothing but grub stuff, so I went to "Advanced Ubuntu options" and then "(Recovery Mode) and went to update grub... In middle o loading it asked to continue (Y/n) I typed Y and it finished, it went back to the options located in (Recovery Mode) and I closed it, and it loaded... And then showed up in another script screen, saying a paragraph on top, and on left side ( where login: would be located etc. ) it says "Grub" and I don't know what to type, if I turn off computer and turn back on it just goes straight to that again... PLEASE HELP:(

  Read the article

• Unable to boot Windows after installing Ubuntu 12.04 - error: invalid efi file path

  - by user113350

  I have a Laptop (ASUS X310A, I installed Ubuntu 12.04 to be side by side with Windows 7 but I seem to have gotten a problem with booting Windows 7. I used the Boot Repair twice with no results. Boot-Repair info: http://paste.ubuntu.com/1417623/ The error I get when starting Windows 7 from GRUB is: error: invalid efi file path In Boot Manager or Menu, I have 3 options now: 2x for Ubuntu (maybe cause I did boot-repair twice) 1x Windows boot manager (If I boot this it opens "ASUS Preload Wizard", it gives me the option to re-install windows losing all previous data -) When I was making the partition before installing Ubuntu, I made the new partition by making sda4 smaller and adding ext4 mounted: "\" and adding a swap area. Installed it and it didn't work, nothing worked. So i booted Ubuntu from the USB again and deleted the partitions I made and decided to make sda3 smaller and making the partitions but this time it gave me the option that I could mount sda3 on "\windows" or "\dos" I ignored it and didn't choose neither because the I know that it doesn't need to be mounted and proceeded to create what is now sda7 (ext4) and sda8 (swap area). It still didn't work so I booted from USB and did the first boot-repair, so I was able to boot Ubuntu now but not windows, but when I did it through my USB I was not able to update boot-repair, so i decided to redo the boot-repair from Ubuntu running on the Hardisk (fully updated) and it still didn't work. In GRUB this is what i see (when booting using Ubuntu as first option in Boot Menu): Ubuntu, with Linux 3.2.0-29-generic Ubuntu, with Linux 3.2.0-29-generic (recovery mode) Windows UEFI loader Windows Boot UEFI bootx64.efi.bkp Windows 7 (loader) (on /dev/sda3) Windows Recovery Environment (loader) (on /dev/sda5) I tried all the ones starting with "Windows" they all don't work Please help, Many Thanks

  Read the article

• Input signal out of range; Change settings to 1600 x 900

  - by Clayton

  I recently installed Ubuntu 12.04 onto my HP Pavilion, in an attempt to make the desktop able to dual-boot Windows 7 and Ubuntu. I managed to get down to the last step, and finished the installation process. After it prompted me to remove what I used to install Ubuntu, I did so, removing my SanDisk 8GB flash drive, and allowed the system to reboot. Like usual, the desktop booted with the HP image, with the options at the bottom(Boot Menu, System Recovery, etc). However, when it should have started up with Ubuntu(like I'm certain it should have done), I received the following error: Input signal out of range Change settings to 1600 x 900 From the time I installed the operating system, back in late August, till now, I've been trying to figure out how I would go about fixing this issue. My mom is also starting to get frustrated with my not having resolved the issue, as its the only desktop that has a printer installed. Is there any possible way to resolve this? To summarize the problem: -Successful boot -Screen brings up error -Screen goes to standby -Nothing else possible until desktop is rebooted, which will initiate the above three steps A few notes: -I did not back up my computer before I installed Ubuntu. I didn't have anything to write to, and basically just forgot to. : -I don't have a Recovery Disk. -I don't have the Windows 7 disk that is supposed to come with the computer. -It has been narrowed down by a friend on Skype that the problem lies with the display, and that the vga= boot command does have something to do with fixing the problem Thank you in advance for resolving this problem. I greatly appreciate it. ^^

  Read the article

• How do I start Ubuntu without X server?

  - by Kaare Mikkelsen

  So, I'm trying to install the official nVidia drivers for my fancy graphics card, and they advice disabling the X server before installing, as well as making sure that I can boot without the X server, so as not to wreck anything. However, I seem to be doing something wrong. As I understand it, this should be as simple as changing the runlevel from 2 to 1? (I am aware that all this may simply be me not understanding runlevels) If that is correct, a quick test should be simply typing "sudo init 1" or "sudo telinit 1" in a terminal? Doing that makes the system attempt to shutdown, only it stops at the purple screen with the ubuntu logo and 5 white dots underneath. I haven't observed it get anywhere from there, I always end up holding down the power button. "sudo telinit 3" has not visible effect. Alternatively, I should be able to get there using the recovery mode, activated through the grub menu? I have very little success with that. After picking recovery mode, I am faced with a set of options about how to proceed. Both choosing the one with "network enabled" and "text only", I get a dialog explaining that this will mount my / file system in read/write mode, and whether this is what I want. I choose yes, and it seems to report that my drive is fine (there's a single line of text detailing the state of the partition). And then it stops. I haven't tried letting it sit for more than a few minutes, but presumably this process should be comparable in duration to a regular boot? I am not particularly fond of messing with any .conf-files until I am certain that I can handle things with training wheels on. So, I guess there are two questions: the one in the title, and "how do I start a text-only session without changing defaults?" Thanks in advance :)

  Read the article

• Booting Error while using 12.04 booting from GRUB

  - by Paul Z.

  my name is Paul. I have encountered an issue relating to GRUB booting and the booting process in general. I have been running Ubuntu 12.04 LTS on my machine for quite a while. Before that, i had (before) 10.04, 11.04, 11.10, etc. I have been running Ubuntu, in general, but more specifically 12.04 for a long time with little to no problems. The problem: Earlier today, i was using my machine and then decided to take a little break. I shut down my machine (laptop, in case anyone was wondering) and left. Later, I came back ready to start it up and continue. I started it up and it took me to the Toshiba screen (like normal) then to the GRUB screen. I guessed that nothing was truly wrong, and chose the first option (something around the lines of: Ubuntu, with linux 3.22.0-35-generic). I waited for a bit and it still displayed the same purple screen. I restarted it and now chose the option like the first but with recovery at the end. Same result. Later, I waited longer and found that my computer came up with a bunch of lines of script. I waited longer but nothing new happened. What are your suggestions as to fix this problem? I will let my computer run overnight with the recovery setting and will let you know what the result is. Until then, please help. Thank you, your time and effort is greatly appreciated!

  Read the article

• Resolution stuck in 640x480 in grub, 11.04 and 12.04

  - by user89797

  I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

  Read the article

• 14.04 LTS Unity no longer boots after last 94 MB update

  - by Harryg123

  I am running 14.04 LTS, Unity, on an HP Pavillion 15, 4GBRAM, 750 GB hdd, I-5 machine, with AMD 8600M graphics card built in. I have disabled the dash and all Ubuntu spyware. I have been faithfully loading all updates as they appear. This morning it asked for a 94 MB update (bringing kernel to .27, I think. Now, I can boot, get to login screen, but it freezes after that. Keyboard doesn't work at that point, but mouse does. I booted into recovery mode, tried to run in generic graphics mode, -- system again froze. I also pressed [esc] during boot, but saw nothing strange; then text disappeared and was replaced by login screen. I am not a hobbyist; this is a production machine and I have a lot of work to do today. Having a standard software update render my machine completely useless... sigh. Perhaps the simplest thing to do would be to revert to the previous configuration. How do I do that? I can boot into recovery mode. But I have no idea how to proceed. TIA for all help. -Harry

  Read the article

• ArchBeat Link-o-Rama for October 18, 2013

  - by OTN ArchBeat

  Enriching XMLType data using relational data – XQuery and fn:collection in action | Lucas Jellema Another detailed technical post from the always prolific Lucas Jellema. Evil Behind ChangeEventPolicy PPR in CRUD ADF 12c and WebLogic Stuck Threads | Andrejus Baranovskis The latest post from Oracle ACE Director Andrejus Baranovskis is a bit of a preview of his presentation at the upcoming UKOUG 2013 event. Podcast: Interview with authors of "Hudson Continuous Integration in Practice" For your listening pleasure... Here's an Oracle Author Podcast Interview with "Hudson Continuous Integration in Practice" authors Ed Burns and Winston Prakash. Manual Recovery Mechanisms in SOA Suite and AIA | Shreenidhi Raghuram Solution architect Shreenidhi Raghuram's post combines information from several sources to provide "a quick reference for Manual Recovery of Faults within the SOA and AIA contexts." Event: Harnessing Oracle Weblogic and Oracle Coherence This OTN Virtual Developer Day event features eight sessions in two tracks, with presentations and hands-on labs for developers and architects delivered by experts in Weblogic, Coherence, and ADF. Registration is free. November 5th, 2013. 9am-1pm PT / 12pm-4pm ET / 1pm-5pm BRT Podcast: IoT Challenges and Opportunities - Part 2 Part 2 of the OTN ArchBeat Internet of Things podcast features a roundtable discussion of IoT challenges: massive data streams, security and privacy issues, evolving standards and protocols. Listen! Video: Design - ADF Architectural Patterns - Two for One Deal | Chris Muir Chris Muir explores the reuse of BTF workspaces across multiple applications and the advantages and disadvantages of reuse at the application level. Thought for the Day "Can't nothing make your life work if you ain't the architect." — Terry McMillan, American author (Born October 18, 1951) Source: brainyquote.com

  Read the article

• Ubuntu 13.04 alongside Windows 8 - How to partition from Windows

  - by mengelkoch

  I plan to install Ubuntu 13.04 alongside Windows 8, and I'm looking for a CLEAR answer on how to conduct partitioning appropriately. I'm very new to all of this so a thorough explanation with minimal jargon would be great. I have an Acer Aspire M5 x64 with 6G RAM. I think I already figured out how to deal with the fast startup, UEFI and SecureBoot issues (I disabled fast startup and disabled Secure Boot). I am able to boot into Ubuntu from a LiveUSB, and I think I am ready to install Ubuntu. Note - despite some advice found here, I do have to disable SecureBoot to boot 13.04 from my LiveUSB. From what I have read here, it seems that I should (at least at first) create the partitions from WITHIN Windows 8, not from the LiveUSB, to avoid reported problems. I have run compmgmt.msc and I see the existing partitions. I see the following: Disk 0: 400 MB Recovery; 300 MB EFI System; Acer (C:) 444.95 GB (Boot, Page File, Crash Dump, Primary Partition); 20 GB Recovery Disk 1: 3.74 GB Primary Partition; 14.90 GB Primary Partition I gather I need to create a mounting point '/' Partition (??), a swap partition, and a home partition. Please explain what these are, how big they should be, how I create them from Windows Disk Management, and anything else I need to know. Eventually, I plan to fully replace Windows 8 with Ubuntu, but for now I want to run alongside Windows 8 and not screw things up. I don't have any critical files saved on this computer yet. Thanks.

  Read the article

• Update to SQL Server Configuration Scripting Utility

  - by Bill Graziano

  Last spring I released a utility to script SQL Server configuration information on CodePlex.  I’ve been making small changes in this application as my needs have changed.  The application is a .NET 2.0 console application.  This utility serves two needs for me.  First it helps with disaster recovery.  All server level objects (logins, jobs, linked servers, audits) are scripted to a single file per object type.  This enables the scripts to be easily run against a DR server.  If these are checked into source control you can view the history of the script and find out what changed and when. The second goal is to capture what changed inside a database.  Objects inside a database (tables, stored procedures, views, etc.) are each scripted to their own file.  This makes it easier to track the changes to an object over time.  This does include permissions and role membership so you can capture security changes.  My assumption is that a database backup is the primary method of disaster recovery for databases so this utility is designed to capture changes to objects.  You can find the full list of changes from the original on the Downloads page on CodePlex.

  Read the article

• Where to install boot loader on a Zenbook Prime?

  - by Christians

  I cannot figure out where to install the boot loader on my Zenbook UX31A Prime. I have installed Ubuntu many times on normal hard drives, but this is the first SSD and I am struggling. Installed Ubuntu 12.04 64-bit selecting "UEFI: general" boot entry. Installation type: Something Else Created partition /sda5 mount as /, /sda6 mount as /home, /sda7 mount as swap Selected /dev/sda for boot loader installation. Other options are /dev/sda, /dev/sda1/dev/sda3 Windows 7 (loader) ... Grub comes up with 6 entries Ubuntu - this runs great Linux 3.2.0-29-generic recovery mode: mode hangs with "fb: conflicting fb hw usae interdrnfb vs EFI VGA - removing generic adapter" memtest86:erro: unknown command `linux 16' memtest86 serial: unknown command `linux 16' Windows 7 (loader) (on /dev/sda3): invalid EFI file path Windows Recovery Environment (on /dev/sda8): unknown command drivemap, invalid EFI file path. My workaround for booting Windows 7 is hitting ESC during boot, windows boot manager comes up and * for booting into Windows 7 I select "WIndows Boot Manager (PO: SanDisk ....". * for booting into Ubuntu I select ubuntu (P0: SanDisk...) How can I boot into Windows from Grub?

  Read the article

• Ubuntu won't load, freezes on purple screen

  - by kara

  Last time I restarted my computer, I could not get Ubuntu to load; the screen would either go black, or would hang at the purple screen indefinitely. I have had some graphics problems in the past, but had put 'nomodeset' after 'quiet splash' in the grub command line, which at least let Ubuntu load. That doesn't work now, and doesn't work if I remove it. I looked up some answers, such as this one: Purple start screen - no splash screen However, when I enter the root in recovery mode in grub, I always get errors when I run those command lines and it won't let me modify the files. Also, if I run in recovery mode and then choose 'resume normal boot', it will continue. But instead of getting a usual interface, I get a black screen that asks for my username and password. I enter these, and it tells me I'm in Ubuntu 12.04, but I'm still on a black screen with texts. It also informs me that there are updates to install. When I use the command 'sudo apt-get update', it starts to retrieve the information, but then the screen goes blank after a couple of seconds and I can't do anything anymore. Any ideas?

  Read the article

• Hard time installing Ubuntu

  - by Nick

  I have a MSI GT780DXR that currently is booting windows 7. I've been trying to dual boot windows 7 and ubuntu for some time now. Here's specs that I think would make a difference Windows 7 500GB*2 RAID 0 hard drives. (Hardware RAID I'm not sure if it's a dedicated RAID card though) 7200RPM Nvidia GT570M Background: I tried to install 12.04 (64 bit) a few times but the Desktop live cd and pendrive boots with a black screen. I've tried wubi but it boots to a black screen as well. I then tried the alternative 12.04 (64 bit) and went through the installation all the way til partitioning. I let Ubuntu notice the raid setup and I setup my swap, /, and home drives, I used my free space to create the three partitions. I tried to resize the windows drive and it told me I couldn't and to be happy with my current setup. When I finally got past I got an error on installing GRUB 2 and decided to skip it and continued on to finish installation. When I tried to boot up I got an invalid partition table error. Windows recovery disc, and a GPARTED live cd couldn't find any hard drives. I ended up following advice and typed this into the recovery command prompt. bootrec /fixmbr bootrec /fixboot bootrec /rebuildBcd It worked and here I am now. The question is, how would I be able to dual boot windows 7 and Ubuntu 12.04 with this information? Thanks,

  Read the article

• Lost Windows 7 files

  - by Pader

  My intention was to have a dual boot system with Ubuntu and Windows 7. Obviously I did something wrong because although I had a system menu on booting (is it normal to appear DOS-like?) which gave me an option of booting into windows 7, I was unable to do so. Also, when I booted into Ubuntu, my Windows 7 drive was not available. The Windows 7 drive was an internal 1TB drive partitioned into a 200GB (OS) and a second partition making up the remainder. I was still unable to access this Windows 7 drive even after deleting Ubuntu as I kept getting an 'requires an NTFS drive' error, or something similar. I could not even re-install Windows 7 as the disk was not recognised. I did eventually get the drive back by but I cannot for the life of me remember how. I did try to recover my lost W7 data using Ontrack Easy Recovery (which has always been succesfull in the past for post format recovery) but it would not recognise the 1TB although it was now formatted as NTFS. From other posts on this site, I gather that this is considered a 'Windows 7 Site' problem by Linux users. However, I would dearly love to recover some of my lost Windows 7 files. I had resigned myself to a lot of lost personal data but I happened to notice that a 2TB drive I had connected through a USB docking station had been repartitioned. It must have happened when I installed Ubuntu as I can think of no other explanation. I certainly do not remember consciously requiring Ubuntu to do this. The additional two partitions on the 2TB drive, the original Windows

  Read the article

• 13.10 Saucy login issues; black screen, loop, and freeze

  - by user135598

  Once upgraded to I 13.10 I was not able to get past the login screen. I had the black screen. Also; I can not log on with low graphics mode from recovery either. It makes no difference if I try default graphics driver or not. Then after running sudo install -f from recovery root prompt I got a login loop. I have purged fglrx, fglrx-legacy, and nvidia-current. I updated my repository with xorg-edgers and reinstalled nvidia-current. Now it semi-freezes at the login screen when I try to log on as my normal user. I say 'semi' because I can still use my mouse to click on the upper right hand Ubuntu logo and Shut Down or Restart the PC. I still cannot log on with my user name, but I can through the Guest login. While logged in as Guest I added a new user account with administrative privileges. I CAN log into this account without problem and from here am able to see that my .dmrc file in my original account reads: [Desktop] Session=XBMC I have changed 'Session=XBMC' to 'Session=ubuntu' and rebooted, but to no avail. The file resets itself and makes a backup of my changes. Any help would be greatly appreciated.

  Read the article

• How to uninstall Ubuntu 12.04 LTS dual booting with Windows 7?

  - by user103799

  I need to uninstall Ubuntu 12.04 LTS from my laptop. It's currently dual booting with windows 7. I've searched and found some ways to do this, but all use some kind of a CD to complete the deletion. I have neither the Ubuntu Live CD nor Windows Install CD/Recovery CD. This laptop did not come with one, and I unfortunately have no available storage device to make a recovery CD. Is there a way to completely uninstall Ubuntu 12.04 LTS dual booting without using any hardware? If there's no way, then how to uninstall using the least hardware possible? Or easy to find hardware? I've nothing against Ubuntu. I installed this as a backup/alternative to error-prone Windows 7. However, after a hardware upgrade, including extra RAMs and a new, better CPU, Windows 7 runs smoothly again. Now I'm running low on hard drive space and need the 40 gig or so of space I partitioned for Ubuntu back. Any help is appreciated, and thanks in advance!

  Read the article

• How to customize the initrd embedded in or coming with the kernel image

  - by STATUS_ACCESS_DENIED

  I would like to add some tools and not just kernel modules into the initrd (initramfs-based). Now I'm aware of how to unpack and how to pack the initrd with cpio and have even written a hook for /etc/initramfs-tools/hooks in the past to integrate a third-party kernel module. However, while the available script libraries seem to be geared towards the integration of modules, none of them seems to be for integration of other entities (in particular programs and their dependencies). What options do I have to automate the integration of some useful tools for recovery into the initrd? I'm talking about the "rescue" system that the system drops into if it is unable to mount the root drive given to it by the boot loader. Please note that I don't want the SquashFS approach as is used for Live-CDs because for the issue at hand it will be by far sufficient to include some relatively small tools that aid in recovery of the system (when it gets stuck in initrd and can't boot further). Also, the machines when they run into the issue that we have had in the past tend to boot into the rescue system, but there a few tools are missing to kick the system back on trail ...

  Read the article

• "Misaligned partition" - Should I do repartition (how?)

  - by RndmUbuntuAmateur

  Tried to install Ubuntu 12.04 from USB-stick alongside the existing Win7 OS 64bit, and now I'm not sure if install was completely successful: Disk Utility tool claims that the Extended partition (which contains Ubuntu partition and Swap) is "misaligned" and recommends repartition. What should I do, and if should I do this repartition, how to do it (especially if I would like not to lose the data on Win7 partition)? Background info: A considerably new Thinkpad laptop (UEFI BIOS, if that matters). Before install there were already a "SYSTEM_DRV" partition, the main Windows partition and a Lenovo recovery partition (all NTFS). Now the table looks like this: SYSTEM_DRV (sda1), Windows (sda2), Extended (sda4) (which contains Linux (sda5; ext4) and Swap (sda6)) and Recovery (sda3). Disk Utility Tool gives a message as follows when I select Ext: "The partition is misaligned by 1024 bytes. This may result in very poor performance. Repartitioning is suggested." There were couple of problems during the install, which I describe below, in the case they happen to be relevant. Installer claimed that it recognized existing OS'es fine, so I checked the corresponding option during the install. Next, when it asked me how to allocate the disk space, the first weird thing happened: the installer give me a graphical "slide" allocate disk space for pre-existing Win7 OS and new Ubuntu... but it did not inform me which partition would be for Ubuntu and which for Windows. ..well, I decided to go with the setting installer proposed. (not sure if this is relevant, but I guess I'd better mention it anyway - the previous partition tools have been more self-explanatory...) After the install (which reported no errors), GRUB/Ubuntu refused to boot. Luckily this problem was quite straightforwardly resolved with live-Ubuntu-USB and Boot-Repair ("Recommended repair" worked just fine). After all this hassle I decided to check the partition table "just to be sure"- and the disk utility gives the warning message I described.

  Read the article

• Create a system image in Windows 8

  - by Greg Low

  One of the things that I've just come to accept is that the designers of Windows 8 and I think very differently.It'll take a long time to convince me that shutting down the computer is a "setting". Even after using Windows 8 for quite a while now, I still find that I struggle nearly every day, just trying to do things that I previously knew how to do. That's just not a good thing.Today I decided to create a system image as I hadn't made one lately. I started in Control Panel looking for Backup options. That yielded nothing except programs that wanted to "Save backup copies of my files with file history". I thought "oh well, let's just try the new search options". I hit the Windows key and typed "Backup". No, nothing came up there either.I searched again all over the Control Panel options to no avail.So it was time to hit Google again. Once again, clearly lots of people used to know how to do this and have been trying to work out where this option went.The first trick is that there are a bunch of Control Panel options that don't appear in the Control Panel. In the address bar at the top, if you click on Control Panel, you'll find there is an option that says "All Control Panel Options". That is curious given that's where I thought I was when I opened Control Panel. No hint is given on that screen that there are a bunch of hidden options. None the less, I then checked out "all" the options.The option that you need to create a system image in Windows 8 turns out to be the "Windows 7 File Recovery" option that appears in this extended list. Why does it say "Windows 7" when it's for "Windows 8" as well and I'm running "Windows 8"? Why do I have to choose an option that says "File Recovery" to create a system image backup?<sigh>But at least I've recorded it here for the next time I forget where to find it.

  Read the article

• Are Windows partitions gone?

  - by Gigili

  I had Windows 7 on my laptop (factory setting), because of some performance issues, I decided to use recovery options to restore it to its factory condition but I don't know what has happened or what I have done that the whole operating system was gone after playing around with recovery options from the boot menu. I couldn't find Windows, so I installed Ubuntu 11.04 on my laptop. Last time I had Ubuntu on it, it was not really compatible with laptop's configuration and I had a bit of problems trying to do normal tasks I used to do on Windows. Now I want to make sure that Windows and its drivers are gone so that I can try to install a newer version of Ubuntu or Windows. I tried the command sudo fdisk -l And the result shown was: myaccount@myaccount-VPCS116FG:~$ sudo fdisk -l [sudo] password for myaccount: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00025b5f Device Boot Start End Blocks Id System /dev/sda1 * 1 38409 308515840 83 Linux /dev/sda2 38409 38914 4052993 5 Extended /dev/sda5 38409 38914 4052992 82 Linux swap / Solaris Disk /dev/dm-0: 4150 MB, 4150263808 bytes 255 heads, 63 sectors/track, 504 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa668cfe8 Disk /dev/dm-0 doesn't contain a valid partition table Is it gone? If not, what command should I try to have access to Windows partitions? Thank you.

  Read the article

• CodePlex Daily Summary for Saturday, August 23, 2014

  CodePlex Daily Summary for Saturday, August 23, 2014Popular ReleasesDIII Save Editor: ROS Alpha 1.2.14.100: initial Ros alpha release please report all bugsSEToolbox: SEToolbox 01.044.014 Release 2: Fixed Ship name not saving. Fixed broken cubes view Bug. Fixed cast VRage.MyFixedPoint error when opening games with Meteors. Added checkbox when Importing 3d model to Export ship, to fill it as solid.CS-Script Source: Release v3.8.5: Fixed problem with the warnings getting hidden in case of the successful compilation cs-script.7z - CS-Script Suite (binaries, documentation, samples) cs-script.ExtensionPack.7z - CS-Script Extension Pack (additional binaries and samples) cs-scriptDocs.7z - CS-Script DocumentationOutlook 2013 Backup Add-In: Outlook Backup Add-In 1.3: Changelog for new version: Added button in config-window to reset the last backup-time (this will trigger the backup after closing outlook) Minimum interval set to 0 (backup at each closing of outlook) Catch exception when data store entry is corrupt Added two parameters (prefix and suffix) to automatically rename the backup file Updated VSTO-Runtime to 10.0.50325 Upgraded project to Visual Studio 2013 Added optional command to run after backup (e.g. pack backup files, ...) Add...babelua: 1.6.7.0: V1.6.7.0 - 2014.8.21New feature: add a file search window ( ctrl+1 or ALT+L ), like The file search in VC Assistant; Stability improvement: performance improvement when BabeLua load/unload; performance improvement when debugger load lua files;Open NFe: RDI Open NFe 3.0 (alpha): Atualização para o layout 3.10 da NFe.MSSQL Deployment Tool: Microsoft SQL Deploy Tool v1.3.1: MicrosoftSqlDeployTool: v1.3.1.38348 What's changed? Update namespace and assembly name. Bug fixing.SharePoint 2013 Search Query Tool: SharePoint 2013 Search Query Tool v2.1: Layout improvements Bug fixes Stores auth method and user name Moved experimental settings to Advanced boxCtrlAltStudio Viewer: CtrlAltStudio Viewer 1.2.2.41183 Alpha: This alpha of the CtrlAltStudio Viewer provides some preliminary Oculus Rift DK2 support. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-2-2-41183-alpha Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or supported by Linden Lab, the makers of Second Life.HDD Guardian: HDD Guardian 0.6.1: New: package now include smartctl 6.3; Removed: standard notification e-mail. Now you have to set your mail server to send e-mail alerts; Bugfix: USB detection error; custom e-mail server settings issue; bottom panel displays a wrong ATA error count.VG-Ripper & PG-Ripper: VG-Ripper 2.9.62: changes NEW: Added Support for 'MadImage.org' links NEW: Added Support for 'ImgSpot.org' links NEW: Added Support for 'ImgClick.net' links NEW: Added Support for 'Imaaage.com' links NEW: Added Support for 'Image-Bugs.com' links NEW: Added Support for 'Pictomania.org' links NEW: Added Support for 'ImgDap.com' links NEW: Added Support for 'FileSpit.com' links FIXED: 'ImgSee.me' linksExchange Database Recovery With and Without Log Files is Possible: Exchange Recovery Application: This Exchange Recovery Software comes with free trial edition which helps users to inspect the working capability of the recovery process. Download free demo version and repair inaccessible mailboxes from EDB file without any obstructions.Linq 4 Javascript: Version 2.4: Minor Changes Made Added Count() and Count(with where clause) Distinct will now use a dictionary instead of a custom dictionary object Organize the unit tests. The variable names will actually make sense and won't be 2 letters. SelectMany will now use the queryable logic.Office / SharePoint 2013 Continuous Integration with TFS 2012: 1.1.0.1: Fixed the following issues in TfsDropDrownloader: Updated to make it work with VS 2013 (including VS 2013 updates) in addition to VS2012. Extend the timeout of downloading drops from 100 seconds to 1 hour. Added more trouble shooting information in the output.CRM Solution CommandLine Helper: CRM Solution Cmd Helper 1.0.0.4: Includes : - Bug fix = Export argument validation : check directory path existence (thanks mszlapa)Office To PDF: OfficeToPDF 1.4: Adds support for additional file types: * mpp (requires MS Project >= 2010) * vsdx, vsdm (requires MS Visio >= 2013) * csv * odt, odc, odp * pot, potm, potx Improves stability and clean removal of COM objects. Adds new flags: * /verbose - to be more verbose when running * /markup - to allow document markup in the PDF when converting Word documents * /excel_max_rows - adds a maximum limit on the number of rows a worksheet can contain when converting Excel documents * /pdfa - crea...MongoRepository: MongoRepository 1.6.6: Installing using NuGet (recommended)MongoRepository is now a NuGet package for your convenience. Step-by-step instructions can be found in Installing MongoRepository using NuGet Installing using BinariesYou can also choose to download the binaries instead of using NuGet. There are 2 downloads: mongorepository_full.x.x.x contains all binaries required (MongoRepository and the 10gen C# driver) mongorepository.x.x.x contains only the MongoRepository binary Make sure you reference MongoReposit...Cryptography Enumerations JavaScript Shell: Cryptography Enumerations JavaScript Shell 1.0.0: First ReleaseCMake Tools for Visual Studio: CMake Tools for Visual Studio 1.2: This release adds the following new features and bug fixes from CMake Tools for Visual Studio 1.1: Added support for CMake 3.0. Added support for word completion. Added IntelliSense support for the CMAKEHOSTSYSTEM_INFORMATION command. Fixed syntax highlighting for tokens beginning with escape sequences. Fixed issue uninstalling CMake Tools for Visual Studio after Visual Studio has been uninstalled.GW2 Personal Assistant Overlay: GW2 Personal Assistant Overlay 1.1: Overview1.1 is the second 'stable' release of the GW2 Personal Assistant Overlay. This version includes just a couple of very minor features and some minor bug fixes. For details regarding installation, setup, and general use, see Documentation. Note: If you were using a previous version, you will probably want to copy over the following user settings files: GW2PAO.DungeonSettings.xml GW2PAO.EventSettings.xml GW2PAO.WvWSettings.xml GW2PAO.ZoneCompletionSettings.xml New FeaturesAdded new "No...New Projects3D Projectile: A 3D Projectile program showing the motion of a ballASP.NET Web Application Starter Kit: This project template is an ASP.NET solution skeleton for a typical web application or single-page application (SPA).Behaving - Behaviour Tree for C#: Behaviour is a Behaviour Tree implementation in C#.Kinect Stream Saver Application _SDK 2: This application is developed based on a sample called "ColorBasics-D2D C++" developed by Microsoft corporation. (Compatible with SDK 2: K4W v2 Dev Preview)MVC Bootstrap Paginator: The MVC Bootstrap Paginator is lightweight and easy to use. It's works out of the box and requires minimal configuration.NuGet Reference Switcher: NuGet Reference Switcher is a Visual Studio extension which can be used to automatically switch NuGet DLL references to project references and vice-versa. QKit: A WP8.1 library that provides various controls and classes that will help developers quickly and easily augment their apps to behave more like native apps.SharePoint 2013 Document Icon Linker: Links the document icon in library views to the document.SharePoint Autocomplete People Search: SharePoint People SearchWADM: WADM

  Read the article

• how do I uninstall old kernel options listed in Grub2? [closed]

  - by user12809

  Possible Duplicate: Is there a way to remove/hide old kernel versions? I installed Ubuntu Tweak in Ubuntu 11.10, went to Janitor, and selected and removed old kernels that appeared there (3.0.0-12). Now, the only installed linux-image that appears as 'Installed' in SPM is the most recent one (3.0.0-13), which is the one I want. It did not however eliminate the kernel listing in Grub 2. At boot: However, at boot, in Grub-2, the following options still appear: 3.0.0-13-generic 3.0.0-13-generic (recovery mode) 3.0.0-12 (generic) (on /dev/sde5) 3.0.0-12 (generic (recovery mode) (on /dev/sde5) And, in Terminal, when I change directory (cd) to /boot, and then list (ls), I get the following listed kernels: 3.0.0-13 2.6.38-12 2.6.38-8 (al There is no change when I sudo update-grub in Terminal 1) what is /dev/sde5, and where is it located in the file system, so i can delete it? 2) why the differences between what appears as installed in SPM, what appears at boot in Grub2, and what shows when I list the contents of Grub2 in Terminal? Ultimately, I simply want to remove the 3.0.0-12 kernel options at boot in Grub2. How do I best and simplest do that? Thanks again donofrij is online now Report Post Edit/Delete Message Reply With Quote Multi-Quote This Message Quick reply to this message

  Read the article

• How can I install from a 9.04 live USB/DVD?

  - by bstpierre

  I have a 9.04 (Jaunty) ISO burned to a USB stick; it appears to be a "live DVD". When I boot from it, I get a GRUB menu listing: Ubuntu, with Linux 2.6.35-generic (This matches the system currently installed on the HDD?) Ubuntu, with Linux 2.6.35-generic (recovery mode) Memory test Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1) Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sda1) Ubuntu 9.04, memtest86+ (on /dev/sda1) When I select Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1), I arrive at the desktop of a 9.04 system. I want to wipe the HDD clean and install 9.04. (Upgrading to something newer is not an option; this version is required by a legacy application.) How can I install from this live USB image? I vaguely remember some incantation that I should be able to use in the booted system, but my google-fu is broken at the moment. I'm comfortable with low-level commands, so if you want to recommend a more hard-core strategy, I'm willing to roll with it without requiring a ton of detail...

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >