Search Results

Search found 5390 results on 216 pages for 'ssl vpn'.

Page 48/216 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• Using a Raspberry Pi as a VPN?

  - by sudo rm -rf

  So I'm sure many of you have heard of the new Raspberry Pi project. I was looking at messing around with Model B, which has the following relevant specs: Broadcom BCM2835 700MHz ARM1176JZFS processor with FPU and Videocore 4 GPU 256MB RAM Boots from SD card, running the Fedora version of Linux (ARM Version) 10/100 BaseT Ethernet socket USB 2.0 socket So I was curious if it would be possible to create a simple VPN out of this little machine. I do realize that since it's an ARM processor that might mess up quite a few things. Any ideas if this is possible? Just for what it's worth, this would be a personal project so I'm not worried about performance.

  Read the article

• VPN using Zywall

  - by Rune FS

  I've played around with a certificate based VPN (normally I don't do hardware) we've manged to setup the connection and the tunnel between the routers is working correctly. We now need the last step. There's no connection to the computers on the other end. What could we have forgotten? (we're testing with two standard configured Win7 machines) EDIT: Just to clarify the tunnel is working I can ping the router on the other end. I can't access the computers on the other side of that router and vice versa. (It's also possible to access the remotemangement console of the remote router on the LAN IP)

  Read the article

• Nodes inside Cisco VPN. Incoming SSH requests allowed. But can't initiate an outbound SSH.

  - by Douglas Peter

  I've a gateway-to-gateway VPN setup between my Linksys RV042 router and a Cisco VPN. I am able to SSH into any of the machine inside the VPN from my network. But none of the machines inside the VPN can initiate an SSH into my network. It seems they've blocked even all ping requests to my network gateway. This is the requirement: I have scripts that SSH into the machines inside the VPN and run a long mysql query. The query generates an output to a file. The time that these queries take is variable. So I have a loop in my machine that periodically SSHes into the VPN machine and checks if the query has finished, and pulls the generated file using SCP. I need to simplify it thus: The script will run at the machine inside the VPN, and when the query completes, it will SSH into my machine and pushes the generated file. Thanks for any ideas.

  Read the article

• mysql connector/net ssl shutsdown the server

  - by Simon

  Hello, when I try to connect my server throw connector/net using ssl with pfx certificate I had problem with establishing the connection. I get connection timeout. And the server probably fall down (I dont know it for sure, becouse I dont manage the server). On the Windows XP works all right, but on Windows 7 dont. Please, where is problem? In Windows 7 or on the server (mysql 5.0)? Sometimes I get "Calling interface SSPI Failed" error, but not everytime. Sometimes is only connection timeout error. Thank you a lot for any help. Regards, simon

  Read the article

• Unable to connect to a remote SQL Server Instance over a VPN

  - by Jack Njiri

  I'm running SQL Server 2005 on two different servers running Win XP. The two servers are in different physical locations and are connected via a dedecated point to point data link in a virtual private network(VPN). Im only able to connect to the remote instance of SQL Server by specifying the IP address on the server name property. If I provide the actual server name say 'ServerA', then I get an error message. Everything works fine except configuring replication at the subscriber level, which requires the actual name of the instance, not an IP address or alias. I have already configured both instances on allow remote connections and im running the SQL Server Browser. How do I connect to the remote instance by providing the instance name? Alternatively how I configure subscription to a remote publisher without supplying the remote instance name?

  Read the article

• Printing to shared printers across VPN

  - by CYMR0

  I have a program that prints labels at five remote sites. Two sites, aren't working, but the rest are with an identical (as far as I can tell) setup. Using Wireshark, I have determined that the handshaking all goes well, but after the "Open Print File Response" the packet that is sent from the server, doesn't reach the client. But I'm a bit at a loss as to where I go from here. I know the port the packet was sent on (445) isn't being blocked, the RST packet gets sent on the same port and that gets there fine. It's also weird that the three out of five sites are working fine. This has been up and running for years without issue, all that we have changed is our connectivity (from DSL to bonded DSL). But this traffic is over a VPN - so it can't be the ISP interfering either can it? I'm totally stuck, and any help would be much appreciated. Thanks!

  Read the article

• How do I learn IPSec VPN implementation on FreeBSD from pfSense

  - by Lang Hai

  I've been trying to figure out a complete working solution for IPSec VPN implementation on FreeBSD but with no luck till now. pfSense seems did a fantastic job on supporting IPSec and even for mobile clients, so I downloaded and installed pfSense hoping to figure out how it works, or at least see some configuration examples, but I couldn't find anything interesting maybe because I'm not familiar with pfSense, so I'd like to ask for help. How pfSense implements IPSec, what tools are used? Where does pfSense store all its configuration files? And since pfSense has its own kernel mods and acts as a different OS, there's no way for us to install it on top of an existing FreeBSD box, and plus that it is such a great project combining those fantastic features, so my question can kinda be extended as: How do we learn from pfSense, and implement its features on top of a regular FreeBSD server?

  Read the article

• Configuring a Unified Communications Certificate for many virtual hosts running in Jetty

  - by rrc7cz

  I have a single IP with Jetty serving up X sites on port 80. Basically you can sign up for our service, then point your domain www.mycompany.com to that IP, and Jetty will serve up your custom site. I would like to add SSL support for all sites. To simplify things, I've looked at getting a single Unified Communications Certificate to plug into Jetty and have it work for all sites. Is this possible? Has anyone done this before? Does Jetty only support traditional, single-domain certs? What issues might I run in to compared to a single-domain cert?

  Read the article

• Apache SSL losing session over load balancer

  - by SaltyNuts

  I have two physical Apache servers behind a load balancer. The load balancer was supposed to be set up so that a user would always be sent to the same physical server after the first request, to preserve sessions. This worked fine for our web apps until we added SSL to the setup. Now the user can successfully login, see the home page, but clicking on any other internal links logs the user right out. I traced the issue to the fact that while initial authentication is performed by server 1, clicking on internal links leads to having the request sent to server 2. Server 2 does not share sessions with server 1, and the user is kicked out. How can I fix it? Do I need to share sessions between the two servers? If so, could you point me to a good guide for doing this? Thanks.

  Read the article

• Set up SSL/HTTPS in zend application via .htaccess

  - by davykiash

  I have been battling with .htaccess rules to get my SSL setup working right for the past few days.I get a requested URL not found error whenever I try access any requests that does not do through the index controller. For example this URL would work fine if I enter the it manually https://www.example.com/index.php/auth/register However my application has been built in such a way that the url should be this https://www.example.com/auth/register and that gives the requested URL not found error My other URLs such as https://www.example.com/index/faq https://www.example.com/index/blog https://www.example.com/index/terms work just fine. What rule do I need to write in my htaccess to get the URL https://www.example.com/auth/register working? My htaccess file looks like this RewriteEngine On RewriteCond %{HTTPS} off RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} [L] RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L] I posted an almost similar question in stackoverflow

  Read the article

• Failed to configure CA certificate chain

  - by kron

  Hi All, I'm trying to setup SSL on fedora with apache. In my vhost... SSLCertificateFile /your/path/to/crt.crt SSLCertificateKeyFile /your/path/to/key.key SSLCertificateChainFile /your/path/to/DigiCertCA.crt I had it working fine with a self signed key, but can't get it to work with the DigiCertCA crt. When I run service httpd restart It fails to start. This is what I get in the logs... [Sat Jan 29 07:57:13 2011] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suex$ [Sat Jan 29 07:57:13 2011] [error] Failed to configure CA certificate chain! Any assistance would be really appreciated! Thanks

  Read the article

• DELL DRAC & Ubuntu VPN Connection

  - by Mikunos

  I am trying to connect to a DELL DRAC card without success by Ubuntu VPN Connection Manager. I have these data: Protocol: PPTP SERVER IP PPTP: 1233.123.123.123 DRAC IP: 192.168.10.25 Subnet: 255.255.0.0 User: myuser Pass: mypass where have I to write these parameters? I have configured the PPTP connection using the graphical tool in Ubuntu 11.10 ... but in the /var/log/syslog I get these messages: Apr 15 11:33:15 shinet NetworkManager[1035]: <info> Starting VPN service 'pptp'... Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 18180 Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN service 'pptp' appeared; activating connections Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN plugin state changed: 3 Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN connection 'Connessione VPN 1' (Connect) reply received. Apr 15 11:33:15 shinet pppd[18182]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded. Apr 15 11:33:15 shinet pppd[18182]: pppd 2.4.5 started by root, uid 0 Apr 15 11:33:15 shinet pppd[18182]: Using interface ppp0 Apr 15 11:33:15 shinet pppd[18182]: Connect: ppp0 <--> /dev/pts/1 Apr 15 11:33:15 shinet NetworkManager[1035]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Apr 15 11:33:15 shinet NetworkManager[1035]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. Apr 15 11:33:15 shinet pptp[18185]: nm-pptp-service-18180 log[main:pptp.c:314]: The synchronous pptp option is NOT activated Apr 15 11:33:46 shinet pppd[18182]: LCP: timeout sending Config-Requests Apr 15 11:33:46 shinet pppd[18182]: Connection terminated. Apr 15 11:33:46 shinet avahi-daemon[1081]: Withdrawing workstation service for ppp0. Apr 15 11:33:46 shinet NetworkManager[1035]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Apr 15 11:33:46 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:46 shinet pppd[18182]: Modem hangup Apr 15 11:33:46 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:51 shinet pppd[18182]: Exit. Apr 15 11:33:51 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:51 shinet NetworkManager[1035]: <info> VPN plugin state changed: 6 Apr 15 11:33:51 shinet NetworkManager[1035]: <info> VPN plugin state change reason: 0 Apr 15 11:33:51 shinet NetworkManager[1035]: <warn> error disconnecting VPN: Could not process the request because no VPN connection was active. Apr 15 11:33:51 shinet NetworkManager[1035]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS. Apr 15 11:33:57 shinet NetworkManager[1035]: <info> VPN service 'pptp' disappeared Thanks

  Read the article

• Cisco ASA 5505 (8.05): asymmetrical group-policy filter on an L2L IPSec tunnel

  - by gravyface

  I'm trying to find a way to setup a bi-directional L2L IPSec tunnel, but with differing group-policy filter ACLs for both sides. I have the following filter ACL setup, applied, and working on my tunnel-group: access-list ACME_FILTER extended permit tcp host 10.0.0.254 host 192.168.0.20 eq 22 access-list ACME_FILTER extended permit icmp host 10.0.0.254 host 192.168.0.20 According to the docs, VPN filters are bi-directional, you always specify the remote host first (10.0.0.254), followed by the local host and (optionally) port number, as per the documentation. However, I do not want the remote host to be able to access my local host's TCP port 22 (SSH) because there's no requirement to do so -- there's only a requirement for my host to access the remote host's SFTP server, not vice-versa. But since these filter ACLs are bidirectional, line 1 is also permitting the remote host to access my host's SSH Server. The documentation I'm reading doesn't seem to clear to me if this is possible; help/clarification much appreciated.

  Read the article

• Switching to LDAP over SSL for Active Directory

  - by bkildow

  On our active directory server, I would like to enable LDAP over SSL as per this: http://support.microsoft.com/kb/321051. I am wondering, once this is set up, will LDAP still be listening on the standard port, 389 once this is implemented as well as the secure port? Or will the secure port completely replace the standard port as an option to connect to? Also, will there need to be any other configurations besides the steps in the article for doing this? In other words, will domain users still be able to authenticate like normal, or is there additional setup that would need to occur?

  Read the article

• Small business VPN solution

  - by Crash893

  I've been looking for a while but I'd like to to implement a vpn solution for anywhere from 1-5 employees at a time (possibly 10 in a year or so) edit: Basically I would like outside users to fire up a client or open a web page and be able to access things inside the company network (share drives / printers/ webapps /etc) I've looked at Astaro Gateway but im not sure if that's the right tool for the job. I know "best" is a subjective term so i would like to break it into to different suggestions 1) what is the cheapest solution given the criteria above 2) what solution will result in the least amount of headaches from the point of view of maintenance and learning curve.

  Read the article

• Connecting PPTP VPN with Ubuntu 9.10

  - by Christian P.

  I have an ubuntu machine that I wish to connect to a VPN and have traffic routed through that. So far I have installed the pptp-linux package and tried my hand at configuring it manually as well as using pptpsetup. I am using Ubuntu 9.10, but regardless of the method I get "Couldn't find MPPE kernel support". Searching a bit for the problem seems to reveal that Ubuntu DOES come with MPPE kernel support (and has done for quite some time). If anyone can figure this out, you'd be a real lifesaver!

  Read the article

• Apache2 SSL And Passenger Configuration Issue

  - by Aditya Manohar

  I have the following virtual hosts configuration blocks. <VirtualHost *:80> DocumentRoot /var/www/html/TestApp/public/ <Directory /var/www/html/TestApp/public/> Allow from all Options -MultiViews </Directory> </VirtualHost> NameVirtualHost *:443 <VirtualHost *:443> DocumentRoot /var/www/html/TestApp/public/ <Directory /var/www/html/TestApp/public/> Allow from all Options -MultiViews </Directory> SSLEngine on SSLCertificateFile /etc/pki/tls/certs/server.crt SSLCertificateKeyFile /etc/pki/tls/private/server.key </VirtualHost> I trying to serve a Rails App off Passenger on Apache. The Problem: The TestApp works fine with Apache and Passenger when not using SSL When I use https://, I see the contents of /var/www/html The path to TestApp is /var/www/html/TestApp Any help will be much appreciated.

  Read the article

• Generating my own SQL Server SSL Certificate

  - by Haoest

  I hear it's possible to make myself a test certificate with MakeCert from Windows SDK, but the beast is 1.5 GB, which I feel reluctant to download for a half-megabyte program. I do, however, have IIS Resource kit with me, which has selfssl to generate certificate for IIS. Will that work for SQL Server? Is there a more convenient way of generating myself an SSL certificate for SQL Server use? I even tried using CREATE CERTIFICATE with TSQL within SQL Server and then have it BACKUP into a file, but with no success. I must have confused the concept of certificate fundamentally. Any advice?

  Read the article

• No DNS resolving with VPN (RRAS)

  - by Sven

  I have a RRAS server setup on a Windows 2003 machine with two NIC's. The VPN works like a charm, I can ping all the other computers on the network. But it fails when I try to access resources with hostnames. I searches for a solution but the ones I found are about RRAS setup with a remote DHCP server. But in my case it's the RRAS server that hands out the ip addresses (option for redirection for WINS, DNS is ON and set to the LAN NIC). I also heard something about FQDN.. but I don't really understand what that is.

  Read the article

• apache, shibboleth, load balancing aliase, ssl

  - by Nikolaidis Fotis

  Good morning folks Could you give me a bit of help with the following problem ? I have a dns load balancing mechanism and an alias (hostAlias) which may point to host01, or host02 I want to configure apache and shibboleth to work with that alias. What happens is ... User types : https://hostAlias (it points to host01) apache host01 : redirect to shibboleth shibboleth host01 : redirect to **https://hostAlias.cern.ch/Shibboleth.sso/ADFS** Now, there are two cases. Either this time hostAlias will point again to host01 , or it will point to host02. If it points to host02, host01 will not get the anwser and the authentication fails. Also, about ssl certificates, I guess that each host will need its own certificate. right ? Should I need a certificate with DNS aliases ? Thanks in advance !

  Read the article

• IE8/IE7/IE6/IE5 on WinXP Use The Wrong Certificate

  - by Marco Calì

  For some reason IE8/IE7/IE6/IE5 on Windows XP, instead to use the certificate that is listed on the nginx website config, is using another certificate that is used from other websites. Checking the nging config file for the website everything is fine. A confirm of this is that all the other browsers (Chrome/Firefox/Safari/IE9) are using the correct certificate. This is the nginx configuration for the app: server { listen 80; listen 443 ssl; server_name mydomain.com; ssl_certificate /root/certs/mydomain.com/mydomain.bundle.crt; ssl_certificate_key /root/certs/mydomain.com/mydoamin.key; access_log /opt/webapps/cs_at/logs/access.log; location / { add_header P3P 'CP="CAO PSA OUR"'; proxy_pass http://127.0.0.1:20004; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $remote_addr; proxy_set_header X-Real-IP $remote_addr; } }

  Read the article

• How to use SSL on AWS EC2

  - by Aubada Taljo

  Hello I have an AWS EC2 account and I am running an instance that serves as a web host for my PHP website... This is a private website that has no UI but only URLs to be requested by my other software to get some response from the server... I want the requests (that I send to the server) to be secured so I want to use https instead of http... so what should I do to achieve that? PS: I found this link while searching... but I don't know how useful it's in my situation http://matt-darby.com/posts/690-aws-ec2-and-ssl Thanks in advance Good luck

  Read the article

• SSL certs or intermediate for DMZ

  - by rex

  I've been tasked with deploying and managing load balancers covering internal servers and DMZ servers. I have no experience with this, and this is a first for my organization as well. Balancers are up, running, legit. Currently we are using a self-signed cert for Exchange/OWA. I know that we should have a cert signed by a CA, but the balancer has options for SSL cert or intermediate cert, and I'm unclear on the difference, or on which we need. We will be hosting Lync, Exchange and some custom apps in the DMZ. disclaimer: Apologies up front, I'm desktop support. I recently passed my Net+. It seems that has made me the network engineer in this organization.

  Read the article

• Aventail VPN connection doesn't work

  - by Warlax

  I installed the Aventail VPN client on both the Mac and a Windows 7 machine, both on my home network. When I try to connect one or the other (I make sure one is disconnected before connecting through the other machine), I get a connection and view the correct certificate - accept it and Aventail tells me that I am connected. However, accessing any page inside my company's network is only possible on Windows. On the Mac I get this page: It looks like my ISP doesn't know how to redirect me? Maybe something about my DNS being set incorrectly on the Mac? Our helpdesk has been completely useless.

  Read the article

• SSL Certificate for local web server

  - by Firefly

  Is it at all possible to create a self-signed certificate for use on multiple machines on a local network which would stop the browser complaining it is not a trusted site? We have a product which is basically a computer running lighttpd to serve a web interface for configuring the computer (sort of how a router has a web interface). There can also be many of these machines running on the same network with dynamic IP's. What I basically want to do is enable SSL for extra security but I don't want people who are on the local network to be given a browser warning about the certificate not being trusted. Is this at all possible?

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >