Search Results

Search found 19628 results on 786 pages for 'late static binding'.

Page 480/786 | < Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >

• DHCP over WiFi on CentOS 6 [closed]

  - by dongle26

  Using CentOS 6 I cannot get my WiFi interface to configure over DHCP. Here is my ifcfg-wlan0: This does not work (although it is correct): DEVICE=wlan0 BOOTPROTO=dhcp ONBOOT=yes HWADDR=xx:xx:xx:xx:xx:xx TYPE=Wireless This works: DEVICE=wlan0 BOOTPROTO=none ONBOOT=yes IPADDR=192.168.0.253 NETMASK=255.255.255.0 DNS1=192.168.0.99 GATEWAY=192.168.0.99 HWADDR=xx:xx:xx:xx:xx:xx TYPE=Wireless I don't want a static IP address, I want a DHCP assigned address. Update: Both of the above configs are correct. Please don't downvote, this really didn't work for me. It must be a bug in CentOS or my wireless driver. See my answer for details.

  Read the article

• Extract cert and private key from JKS keystore to use it in Apache2 httpd

  - by momo

  I tried to find this but no luck. I created a JKS keystore and generated a CSR, then imported the signed cert and intermediate and root CA certs. Used this keystore on Tomcat without problems. Now I want to use the same cert for Apache2 http server on the same machine. I actually want to set up mod_jk to redirect /*.jsp and servlets paths to Tomcat and serve the static content and PHP from Apache2. I tried to convert JKS to PKCS12 with keytool to afterwards handle it with openssl with a command like this: keytool -importkeystore -srckeystore foo.jks \ -destkeystore foo.p12 \ -srcstoretype jks \ -deststoretype pkcs12 The problem is only the cert is exported but not the rest of the chain. I actually used this keystore on Apache and it complained about key and cert don't matching (not sure if it's related to the chain or not). Can anyone point me on the right direction? I am not a server guy and I am kinda lost with all this things :-(

  Read the article

• Troubleshooting VC++ DLL in VB.Net

  - by Jolyon

  I'm trying to make a solution in Visual Studio that consists of a VC++ DLL and a VB.Net application. To figure this out, I created a VC++ Class Library project, with the following code (I removed all the junk the wizard creates): mathfuncs.cpp: #include "MathFuncs.h" namespace MathFuncs { double MyMathFuncs::Add(double a, double b) { return a + b; } } mathfuncs.h: using namespace System; namespace MathFuncs { public ref class MyMathFuncs { public: static double Add(double a, double b); }; } This compiles quite happily. I can then add a VC++ console project to the solution, add a reference to the original project for this new project, and call it as follows: test.cpp: using namespace System; int main(array<System::String ^> ^args) { double a = 7.4; int b = 99; Console::WriteLine("a + b = {0}", MathFuncs::MyMathFuncs::Add(a, b)); return 0; } This works just fine, and will build to test.exe and mathsfuncs.dll. However, I want to use a VB.Net project to call the DLL. To do this, I add a VB.Net project to the solution, make it the startup project, and add a reference to the original project. Then, I attempt to use it as follows: MsgBox(MathFuncs.MyMathFuncs.Add(1, 2)) However, when I run this code, it gives me an error: "Could not load file or assembly 'MathFuncsAssembly, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. An attempt was made to load a program with an incorrect format." Do I need to expose the method somehow? I'm using Visual Studio 2008 Professional.

  Read the article

• make vnc server listen on guest's ip address

  - by gucki

  My host system has the IP 192.168.0.250. Now I want to create a kvm guest using a tap device (so the network card of the guest just acts like a "real" one). The guest has a static ip 192.168.0.249 which it setups on his own (no dhcp). To connect to the guest using VNC I can to use the host's IP. So far everything works fine. Now I wonder how I can make the VNC server to listen on the guest's IP address, so I can use the guest's IP address to connect using my vnc client. Of course I cannot use -vnc 192.168.0.249:1 as this IP is not active on the host and so fails with Cannot assign requested address. Can this be done with tap networking at all? If not, how to get it working?

  Read the article

• help animating player in corona sdk

  - by andrew McCutchan

  working on a game in the corona sdk with lua and I need help so the player animates on the line drawn. Right now he animates at the beggining and the end but not on the line. here is the player code function spawnPlayerObject(xPlayerSpawn,yPlayerSpawn,richTurn) --spawns Rich where we need him. -- riches sprite sheet and all his inital spirites. We need to adjust this so that animations 3-6 are the only ones that animate when moving horizontally local richPlayer = sprite.newSpriteSet(richSheet1,1,6) sprite.add(richPlayer, "rich", 1,6,500,1) rich = sprite.newSprite(richPlayer) rich.x = xPlayerSpawn rich.y = yPlayerSpawn rich:scale(_W*0.0009, _W*0.0009) -- scale is used to adjust the size of the object. richDir = richTurn rich.rotation = richDir rich:prepare("rich") rich:play() physics.addBody( rich, "static", { friction=1, radius = 15 } ) -- needs a better physics body for collision detection. end and here is the code for the line function movePlayerOnLine(event) --for the original image replace all rich with player. if posCount ~= linePart then richDir = math.atan2(ractgangle_hit[posCount].y-rich.y,ractgangle_hit[posCount].x-rich.x)*180/math.pi playerSpeed = 5 rich.x = rich.x + math.cos(richDir*math.pi/180)*playerSpeed rich.y = rich.y + math.sin(richDir*math.pi/180)*playerSpeed if rich.x < ractgangle_hit[posCount].x+playerSpeed*10 and rich.x > ractgangle_hit[posCount].x-playerSpeed*10 then if rich.y < ractgangle_hit[posCount].y+playerSpeed*10 and rich.y > ractgangle_hit[posCount].y-playerSpeed*10 then posCount = posCount + 1 end end I don't think anything has changed recently but I have been getting an error when testing of " attempt to upvalue "rich" a nil value" on the second line, richDir = etc.

  Read the article

• Missing eth0 configuration file

  - by Godric Seer

  I have two servers both running Scientific Linux 6 on the same network. Since I want SSH access to both of them, I want to give them both static IPs so I can setup port forwarding and not worry how my router assigns local IPs. I found that I need to edit the configuration file /etc/network-scripts/ifcng-eth0, however that file does not exist. The network card works fine, and I am able to ssh as long as I access the router and find the local ip. Can I simply make my own configuration file, or did I miss some step in configuring the system that I need to complete?

  Read the article

• How to read values from RESX file in ASP.NET using ResXResourceReader

  Here is the method which returns the value for a particular key in a given resource file. Below method assumes resourceFileName is the resource filename and key is the string for which the value has to be retrieved. public static string ReadValueFromResourceFile(String resourceFileName, String key)    {        String _value = String.Empty;        ResXResourceReader _resxReader = new ResXResourceReader(            String.Format("{0}{1}\\{2}",System.AppDomain.CurrentDomain.BaseDirectory.ToString(), StringConstants.ResourceFolderName , resourceFileName));        foreach (DictionaryEntry _item in _resxReader)        {            if (_item.Key.Equals(key))            {                _value = _item.Value.ToString();                break;            }        }        return _value;    } span.fullpost {display:none;}

  Read the article

• Apache mod_rewrite redirect with prefix

  - by Marc

  I am newbie with Apache's mod_rewrite and I'm having some difficulties getting it to do what I want. In my static directory, I have some javascript files (.js) with 2 kind of filename: xxxx.js which is the standard file name AT_xxxx.js (with prefixed filename) which has been duplicated from previous standard file name but also contains my customizations I would like to parse requests for each standard requested javascript file (xxxx.js) to check if a customized file exists (AT_xxxx.js) including all sub-directories. Then, in this case, use the custom file instead of the standard file (perhaps by internal redirect). I tried to figure this out for hours but something is still wrong. Note: Also, I don't know how to find custom files in sub-directories. DocumentRoot "/data/apps/dev0/custom/my_static" <filesMatch "\\.(js)$"> Options +FollowSymLinks RewriteEngine on RewriteCond %{DOCUMENT_ROOT}/AT_$1.js -f RewriteRule ^(.*[^/])/?$ %{DOCUMENT_ROOT}/AT_$1.js [QSA,L] </filesMatch>

  Read the article

• Apache port forwarding with ZTE ZXV10 W300 router (provider specific firmware)

  - by dannote

  I'm trying to configure port forwarding for Apache 2.2 installed on Windows XP SP3 with ZTE ZXV10 W300 router. The computer has a static IP 192.168.1.2. Port forwarding is configured as following: Enable true Name Apache Protocol TCP (also tried TCP and UPD) WAN Host Start IP Address empty WAN Host End IP Address empty WAN Connection stream WAN Start Port 8080 WAN End Port 8080 LAN Host IP Address 192.168.1.2 LAN Host Start Port 8080 LAN Host End Port 8080 Port 8080 is open for both TCP and UPD in Windows Brandmauer. Apache configuration: Listen 192.168.1.2:8080 Router Firmware: Hardware Version V1.0.01 Software Version V8.0.02T03_CFA Boot Loader Version V1.1.2 The provider is COMSTAR. I'm not sure but it's said they flash routers with modified firmware. I have also tried to set up Bitcomet port forwarding on port 13514 and failed.

  Read the article

• Service Broker, not ETL

  - by jamiet

  I have been very quiet on this blog of late and one reason for that is I have been very busy on a client project that I would like to talk about a little here. The client that I have been working for has a website that runs on a distributed architecture utilising a messaging infrastructure for communication between different endpoints. My brief was to build a system that could consume these messages and produce analytical information in near-real-time. More specifically I basically had to deliver a data warehouse however it was the real-time aspect of the project that really intrigued me. This real-time requirement meant that using an Extract transformation, Load (ETL) tool was out of the question and so I had no choice but to write T-SQL code (i.e. stored-procedures) to process the incoming messages and load the data into the data warehouse. This concerned me though – I had no way to control the rate at which data would arrive into the system yet we were going to have end-users querying the system at the same time that those messages were arriving; the potential for contention in such a scenario was pretty high and and was something I wanted to minimise as much as possible. Moreover I did not want the processing of data inside the data warehouse to have any impact on the customer-facing website. As you have probably guessed from the title of this blog post this is where Service Broker stepped in! For those that have not heard of it Service Broker is a queuing technology that has been built into SQL Server since SQL Server 2005. It provides a number of features however the one that was of interest to me was the fact that it facilitates asynchronous data processing which, in layman’s terms, means the ability to process some data without requiring the system that supplied the data having to wait for the response. That was a crucial feature because on this project the customer-facing website (in effect an OLTP system) would be calling one of our stored procedures with each message – we did not want to cause the OLTP system to wait on us every time we processed one of those messages. This asynchronous nature also helps to alleviate the contention problem because the asynchronous processing activity is handled just like any other task in the database engine and hence can wait on another task (such as an end-user query). Service Broker it was then! The stored procedure called by the OLTP system would simply put the message onto a queue and we would use a feature called activation to pick each message off the queue in turn and process it into the warehouse. At the time of writing the system is not yet up to full capacity but so far everything seems to be working OK (touch wood) and crucially our users are seeing data in near-real-time. By near-real-time I am talking about latencies of a few minutes at most and to someone like me who is used to building systems that have overnight latencies that is a huge step forward! So then, am I advocating that you all go out and dump your ETL tools? Of course not, no! What this project has taught me though is that in certain scenarios there may be better ways to implement a data warehouse system then the traditional “load data in overnight” approach that we are all used to. Moreover I have really enjoyed getting to grips with a new technology and even if you don’t want to use Service Broker you might want to consider asynchronous messaging architectures for your BI/data warehousing solutions in the future. This has been a very high level overview of my use of Service Broker and I have deliberately left out much of the minutiae of what has been a very challenging implementation. Nonetheless I hope I have caused you to reflect upon your own approaches to BI and question whether other approaches may be more tenable. All comments and questions gratefully received! Lastly, if you have never used Service Broker before and want to kick the tyres I have provided below a very simple “Service Broker Hello World” script that will create all of the objects required to facilitate Service Broker communications and then send the message “Hello World” from one place to anther! This doesn’t represent a “proper” implementation per se because it doesn’t close down down conversation objects (which you should always do in a real-world scenario) but its enough to demonstrate the capabilities! @Jamiet ----------------------------------------------------------------------------------------------- /*This is a basic Service Broker Hello World app. Have fun! -Jamie */ USE MASTER GO CREATE DATABASE SBTest GO --Turn Service Broker on! ALTER DATABASE SBTest SET ENABLE_BROKER GO USE SBTest GO -- 1) we need to create a message type. Note that our message type is -- very simple and allowed any type of content CREATE MESSAGE TYPE HelloMessage VALIDATION = NONE GO -- 2) Once the message type has been created, we need to create a contract -- that specifies who can send what types of messages CREATE CONTRACT HelloContract (HelloMessage SENT BY INITIATOR) GO --We can query the metadata of the objects we just created SELECT * FROM   sys.service_message_types WHERE name = 'HelloMessage'; SELECT * FROM   sys.service_contracts WHERE name = 'HelloContract'; SELECT * FROM   sys.service_contract_message_usages WHERE  service_contract_id IN (SELECT service_contract_id FROM sys.service_contracts WHERE name = 'HelloContract') AND        message_type_id IN (SELECT message_type_id FROM sys.service_message_types WHERE name = 'HelloMessage'); -- 3) The communication is between two endpoints. Thus, we need two queues to -- hold messages CREATE QUEUE SenderQueue CREATE QUEUE ReceiverQueue GO --more querying metatda SELECT * FROM sys.service_queues WHERE name IN ('SenderQueue','ReceiverQueue'); --we can also select from the queues as if they were tables SELECT * FROM SenderQueue   SELECT * FROM ReceiverQueue   -- 4) Create the required services and bind them to be above created queues CREATE SERVICE Sender   ON QUEUE SenderQueue CREATE SERVICE Receiver   ON QUEUE ReceiverQueue (HelloContract) GO --more querying metadata SELECT * FROM sys.services WHERE name IN ('Receiver','Sender'); -- 5) At this point, we can begin the conversation between the two services by -- sending messages DECLARE @conversationHandle UNIQUEIDENTIFIER DECLARE @message NVARCHAR(100) BEGIN   BEGIN TRANSACTION;   BEGIN DIALOG @conversationHandle         FROM SERVICE Sender         TO SERVICE 'Receiver'         ON CONTRACT HelloContract WITH ENCRYPTION=OFF   -- Send a message on the conversation   SET @message = N'Hello, World';   SEND  ON CONVERSATION @conversationHandle         MESSAGE TYPE HelloMessage (@message)   COMMIT TRANSACTION END GO --check contents of queues SELECT * FROM SenderQueue   SELECT * FROM ReceiverQueue   GO -- Receive a message from the queue RECEIVE CONVERT(NVARCHAR(MAX), message_body) AS MESSAGE FROM ReceiverQueue GO --If no messages were received and/or you can't see anything on the queues you may wish to check the following for clues: SELECT * FROM sys.transmission_queue -- Cleanup DROP SERVICE Sender DROP SERVICE Receiver DROP QUEUE SenderQueue DROP QUEUE ReceiverQueue DROP CONTRACT HelloContract DROP MESSAGE TYPE HelloMessage GO USE MASTER GO DROP DATABASE SBTest GO

  Read the article

• Losing WLAN connections but maintaining internet connections on WIndows 7 Workgroup

  - by Di

  I have 4 computers all running Windows 7 networked in a Work group through Billion 7404vgp-m wireless router.All drivers and firmware for wireless adapters and router are up to date. Windows Firewall and Defender disabled.Disconnected ipv6. Running Nod 32 anti virus software. All have own static IP address 192.XXX.X.XXX. When I Reset the router all computers have Internet and LAN access for about 1 hour and then they will lose the LAN connection but maintain Internet connection. Resetting wireless adapters or restarting computers does nothing to fix this but resetting router will. What is causing this and how do I fix it. Thanks Di

  Read the article

• Network - Routers conflicting in my subnet

  - by Richard

  I have a router whose IP is 192.168.1.1 and I be experiencing conflict with another router on my subnet (which probably has 192.168.1.1 as IP too). I think when it tries to connect to the network, eventually taking the place of my router because when I try to access the config page of my router, which appears to me is a config page from another router that is not mine. Do you have any solution except to change the IP of my router to an IP not common? As I have set up the exclusivity that only my IP router? I work with dynamic IPs (wireless networking) and static (for wired). How do I? I just wanna to do some setting in my router that affects all other, so that doesn't conflicts anymore.

  Read the article

• Oracle and Partners release CAMP specification for PaaS Management

  - by macoracle

  Cloud Application Management for Platforms The public release of the Cloud Application Management for Platforms (CAMP) specification, an initial draft of what is expected to become an industry standard self service interface specification for Platform as a Service (PaaS) management, represents a significant milestone in cloud standards development. Created by several players in the emerging cloud industry, including Oracle, the specification is being submitted to the OASIS standards organization (draft charter) where it will be finalized in an open development process. CAMP is targeted at application developers and deployers for self service management of their application on a Platform-as-a-Service cloud. It is closely aligned with the application development process where applications are typically developed in an Application Development Environment (ADE) and then deployed into a private or public platform cloud. CAMP standardizes the model behind an application’s dependencies on platform components and provides a standardized format for moving applications between the ADE and the cloud, and if and when desirable, between clouds. Once an application is deployed, CAMP provides users with a standardized self service interface to the PaaS offering, allowing the cloud consumer to manage the lifecycle of the application on that platform and the use of the underlying platform services. The CAMP interface includes a RESTful binding of the CAMP model onto the standard HTTP protocol, using JSON as the encoding for the model resources. The model for CAMP includes resources that represent the Application, its Components and any Platform Components that they depend on. It's important PaaS Cloud consumers understand that for a PaaS cloud, these are the abstractions that the user would prefer to work with, not Virtual Machines and the various resources such as compute power, storage and networking. PaaS cloud consumers would also not like to become system administrators for the infrastructure that is hosting their applications and component services. CAMP works on this more abstract level, and yet still accommodates platforms that are built using an underlying infrastructure cloud. With CAMP, it is up to the cloud provider whether or not this underlying infrastructure is exposed to the consumer. One major challenge addressed by the CAMP specification is that of ensuring that application deployment on a new platform is as seamless and error free as possible. This becomes even more difficult when the application may have been developed for a different platform and is now moving to a new one. In CAMP this is accomplished by matching the requirements of the application and its components to the specific capabilities of the underlying platform. This needs to be done regardless of whether there are existing pools of virtualized platform resources (such as a database pool) which are provisioned(on the basis of a schema for example), or whether the platform component is really just a set of virtual machines drawn from an infrastructure pool. The interoperability between platform clouds that CAMP offers means that a CAMP client such as an ADE can target multiple clouds with a single common interface. Applications can even be spread across multiple platform clouds and then managed without needing to create a specialized adapter to manage the components running in each cloud. The development of CAMP has been an effort by a small set of companies, but there are significant advantages to this approach. For example, the way that each of these companies creates their platforms is different enough, to ensure that CAMP can cover a wide range of actual deployments. CAMP is now entering the next phase of development under the guidance of an open standards organization, OASIS, which will likely broaden it’s capabilities. We hope is to keep it concise and minimal, however, to ease implementation and adoption. Over time there will be many different types of platform components that applications can use and which need management. CAMP at this point only includes one example of this (in an appendix) – DataBase as a Service. I am looking forward to the start of the CAMP Technical Committee in OASIS and will do my best to ensure a successful development process. Hope to see you there.

  Read the article

• Multiple IPs on Juniper SRX100 Untrust Port

  - by Will

  I am having trouble getting multiple IP addresses on the untrust port. I have tried a few different methods, but can't seem to get it to work. Does anyone have a good tutorial that is not easily found or if possible can type up the steps? I don't mind trying to do it through ssh, but would prefer web interface. Thank you ++++++++++++ Feb 1 fe-0/0/0 { unit 0 { family inet { dhcp { update-server; } } } } routing-options { static { route 0.0.0.0/0 next-hop 96.11.173.81; } } Right now it's setup to receive settings from 'cable modem' through dhcp, but I think it's only getting one IP.

  Read the article

• Running bridged-networking vmware player on a Linux machine with 2 interfaces

  - by Roman D

  I have got a laptop running Arch Linux with 2 interfaces: wireless (wlan0) and ethernet (eth0). I use wlan0 to access internet (static IP, networking is configured using netcfg), and I connect a second PC to the eth0. Now, whenever I start vmware player (v. 4.0.4), it chooses wlan0 to connect its bridged virtual NIC to, but I need it to connect to eth0 (I want my guest machine to be able to talk to the second physical PC on eth0). So, I disable the wlan0 interface (netcfg -d wireless) and restart vmware. Now, it connects to eth0, and everything works fine; I can ping the host PC from the virtual one, and I can ping the virtual PC from the second physical PC connected to eth0. Then, if I try to reenable the wlan0 interface (netcfg -u wireless), all of the connectivity between the host and the guest (and between the second physical PC and the guest) gets lost, until I disable wlan0 again. Can someone please give me a hint on what's going on?

  Read the article

• Network Configuration

  - by Dario

  Hello, This is my situation: Router A: IP 192.168.1.1 Mask 192.168.1.0/24 - Connected to the internet. Server: - Interface eth0: inet addr:10.1.1.125 Mask:255.255.255.0 (connected to router B) - Interface ra0: inet addr:192.168.1.125 Mask:255.255.255.0 (connected to router A) Router B: IP 10.1.1.254 Mask 10.1.1.0/24 - Connected to Server's eth0 Computer: connected to Router B via WiFi connection. I configured a static route on Router B that use as default gateway 192.168.1.125 and i can ping that ip from computer. The problem is: how i can connect to the internet ? In other words, traffic coming from Server eth0 should use ra0 as gateway. Any suggestion ? Thank you

  Read the article

• restricting access only through domains on nginx on virtual hosts

  - by Mo J. Mughrabi

  I have finished setting up nginx for virtual hosting, this is how my config files look like server { listen 80; server_name domain.com; access_log /home/domain.com/prod_webapp/logs/access.domain.com.log; error_log /home/domain.com/prod_webapp/logs/error.domain.com.log; location /static { root /home/domain.com/prod_webapp/mocorner/ph/; } location / { try_files $uri @uwsgi; } location @uwsgi { include uwsgi_params; uwsgi_pass unix:/tmp/domain_uwsgi.sock; }} on the same machine, I have domain1.com and domain2.com, each when i access I get its content which is great. My problem is that when i try to access the user using the IP address i get one of the sites in the virtual hosts too.. Although i disabled the default (removed the symbolic link) from sites-enabled folder but still not solved it for me. any suggestions?

  Read the article

• XNA Easy Storage XBOX 360 High Scores

  - by user1003211

  To followup from a previous query - I need some help with the implementation of easystorage high scores, which is bringing up some errors on the xbox. I get the prompt screen, a savedevice is selected and a file are all created! However the file remains empty, (I've tried prepopulating but still get errors). The full portions of the scoring code can be found here: http://pastebin.com/74v897Yt The current issue in particular is in LoadHighScores() - "There is an error in XML document (0, 0)." under line data = (HighScoreData)serializer.Deserialize(stream); I'm not sure whether this line is correct either: HighScoreData data = new HighScoreData(); public static HighScoreData LoadHighScores(string container, string filename) { HighScoreData data = new HighScoreData(); if (Global.SaveDevice.FileExists(container, filename)) { Global.SaveDevice.Load(container, filename, stream => { File.Open(Global.fileName_options, FileMode.OpenOrCreate, FileAccess.Read); try { // Read the data from the file XmlSerializer serializer = new XmlSerializer(typeof(HighScoreData)); data = (HighScoreData)serializer.Deserialize(stream); } finally { // Close the file stream.Close(); // stream.Dispose(); } }); } return (data); } I call: PromptMe(); when the Start button is pressed at the beginning. I call: if (Global.SaveDevice.IsReady){entries = LoadHighScores(HighScoresContainer, HighScoresFilename);} during the menu screen to try and display the highscore screen. I call: SaveHighScore(); when game ends. I've tried altering the struct code to a class but still no luck. Any help greatly appreciated.

  Read the article

• How to force browsers to always reload xslt files?

  - by bitmask

  Related: Apache: How can I force the browser to reload CSS files? I'm building an xml page (on an apache2) that is supposed to be translated to xhtml by the browser, so my server also serves a main.xslt which is used as stylesheet by the xml file, similar to the scenario with the css files in the linked question. However, none of tricks provided in either that answer, nor some issues on SO solve the issue for Opera. While Firefox responds to F5 by fetching not only the xml file but also the xslt file, Opera only reloads the xml file. I tried both, setting the Last-Modified HTTP header via an .htaccess file and using the expires module of apache2. This is what my .htaccess looks right now: AddType text/xsl;charset=utf-8 .xslt ExpiresByType text/xsl "modification plus 1 second" Header set Last-Modified "Wed, 08 Jan 2000 23:11:55 GMT" #Header set Last-Modified "Wed, 08 Jan 2020 23:11:55 GMT" If I open the xsl myself and manually reload it, the xml presentation is updated as well, but this is tedious for development. Note: There is no php or any kind of scripting involved. Everything is static.

  Read the article

• Copying 500GB Data to EC2 Instances Local Drive

  - by iCode

  Please do not ask me why (they made me) but I have to copy 500GB data to the local drive every 200 node/instances that I am launching in EC2. For reasons beyond this post, this data must by on the local drive and not EBS drive so I can not benefit from snapshots. What is the fastest way that I can manage to this? Copying from S3 to each node takes a long time. I trying to attached an EBS volume to every node with the data and then copy the data from EBS to the local drive but that also take a long time (several hours_) Now, I am also thinking to use bit torrent but not sure how well it is going to be. What is the best way to copy 500GB of static data to each local drive of 200 ec2 instances? The 500Gb of data is composed several hundred of file with varying size but the biggest file is 20GB.

  Read the article

• Distributed Database Services?

  - by Cameron

  I'm working on a database-driven web service with clients in the US and Australia. We're currently hosted in the US, however our Australian clients are experiencing lag. The lag is primarily due to the fact that the pages launch AJAX queries which require some db work to be done on our database in the US and these take a while to perform a round trip. Ideally, we're looking for some kind of distributed database system which replicates our main US database in Australia (and possibly other locations if we choose to expand later on). Does anyone have any suggestions for services which offer something like this? Something like a CDN (CacheFly etc), which is web-based, simple to set up etc but for databases instead of static files. Ideally it would be completely transparent to the application and abstract away all the distributed database management, syncs etc.

  Read the article

• Game software design

  - by L. De Leo

  I have been working on a simple implementation of a card game in object oriented Python/HTML/Javascript and building on the top of Django. At this point the game is in its final stage of development but, while spotting a big issue about how I was keeping the application state (basically using a global variable), I reached the point that I'm stuck. The thing is that ignoring the design flaw, in a single-threaded environment such as under the Django development server, the game works perfectly. While I tried to design classes cleanly and keep methods short I now have in front of me an issue that has been keeping me busy for the last 2 days and that countless print statements and visual debugging hasn't helped me spot. The reason I think has to do with some side-effects of functions and to solve it I've been wondering if maybe refactoring the code entirely with static classes that keep no state and just passing the state around might be a good option to keep side-effects under control. Or maybe trying to program it in a functional programming style (although I'm not sure Python allows for a purely functional style). I feel that now there's already too many layers that the software (which I plan to make incredibly more complex by adding non trivial features) has already become unmanageable. How would you suggest I re-take control of my code-base that (despite being still only at < 1000 LOC) seems to have taken a life of its own?

  Read the article

• Troubleshooting web timeouts with a Belkin router

  - by rexzilla

  I have a Belkin FSD7632-4 ADSL wifi router. Ever since I got it, I've faced this problem of websites timing out. For example, I go to flickr.com, and the images won't load because they come from farm1.static.flickr.com. Either I wait 10 minutes or so until the timed out sockets are closed and retry (with variable results) or I reboot the router. This happens irrespective of whether I use wired or wifi network. I'm in India, using Airtel Broadband, and if I use my ISP supplied Beetel 220BX ADSL router (which has no wifi and only one LAN port), everything works fine. I copied over the broadband settings from my old router: VPI/VCI values=1/32 Encapsulation=LLC MTU=1492 I have not enabled any firewall on the router. Is there anything else I can try? Or is it a defect with the router and should I take it back for a replacement? I bought it just 2 months ago.

  Read the article

• No input file specified on nginx and php-cgi

  - by Sandeep Bansal

  I'm trying to run nginx and php-cgi on my Windows PC, I've got up to the point where I want to move the html directory back two directory's so I can sort of create a structure. The only problem I have now is that PHP doesn't pick up any .php file. I have tried loading a static html file (localhost/test.html) and it works fine but localhost/info.php doesn't work at all. Can anyone give me some guidance on this? The part of the server block can be found below. server { listen 80; server_name localhost; root ../../www; index index.html index.htm index.php; #charset koi8-r; #access_log logs/host.access.log main; location ~ \.php$ { fastcgi_pass 127.0.0.1:9123; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } Thanks

  Read the article

• How to turn on/off code modules?

  - by Safran Ali

  I am trying to run multiple sites using single code base and code base consist of the following module (i.e. classes) User module Q & A module Faq module and each class works on MVC pattern i.e. it consist of Entity class Helper class (i.e. static class) View (i.e. pages and controls) and let's say I have 2 sites site1.com and site2.com. And I am trying to achieve following functionality site1.com can have User, Q & A and Faq module up and running site2.com can have User and Q & A module live while Faq module is switched off but it can be turned-on if needed, so my query here is what is the best way to achieve such functionality Do I introduce a flag bit that I check on every page and control belonging to that module? It's more like CMS where you can turn on/off different features. I am trying to get my head around it, please provide me with an example or point out if I am taking the wrong approach.

  Read the article

< Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >