Search Results

Search found 17148 results on 686 pages for 'screen coordinates'.

Page 480/686 | < Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >

• Remote Desktop fails with no error

  - by Duane

  Recently, I've been having problems connecting to a remote machine via RDP. I can connect fine exactly once, but all subsequent attempts fail until the remote machine is rebooted. I seem to authenticate properly, but the RDP logon dialog disappears after showing, "Configuring remote session..." for a few seconds. No errors or other useful info is written either to my screen or the Event Logs of the two machines involved. I've tried disabling remote sound as others have suggested, with no success. I'm still investigating a solution, but would appreciate any thoughts. Fortunately, I can reboot the box remotely w/o causing any problems, but this is a less than ideal workaround.

  Read the article

• PC reboots spontaenously: debugging tips

  - by aaron

  I swapped my core 2 duo for a quad core recently, and generally things run fine, but every now and then my computer just restarts. I don't even get a blue screen (Vista 32). Core temp isn't a problem. My thinking is that my power supply is inadequate, but I haven't been able to test that (one idea was to under clock the cpu to see if that helped, but going up in speed was the only simple thing to do in the BIOS) Two cases where I semi-consistanly get problems: - Borderlands windowed after some period of time (and some other games, but Borderlands does it pretty regularly) - watching a video (e.g. quicktime/vlc) and having another video running Another thought is non-cpu heat? Maybe the graphics card? Any thoughts on how to track this down appreciated. Thanks!

  Read the article

• Fixing restore active desktop on windows xp

  - by Rachel Nark

  I've already tried this: http://answers.microsoft.com/en-us/windows/forum/windows_xp-desktop/windows-xp-will-not-restore-my-active-desktop/f664bfe4-0acd-4b11-8918-eb779bb2cc07 had no luck. All I know is that the computer crashed from a power outage. I've tried clicking the restore button and rebooting. Nothing. What else is there to try? Would like to have the desktop back. It powers on fine. I can login and use windows just fine. Just you get that annoying restore active desktop screen.

  Read the article

• How to disable the green power light on the Sony Vaio

  - by sri

  The Sony Vaio's green power light is extremely bright and very distracting! I can't even look at the screen without this power light being in my view!! Is there any way to disable it or reduce its intensity? Googling for "sony vaio disable green power light" (and similar combinations) didn't provide anything useful. I tried booting into the BIOS, but it didn't have an option for this. Also, the Viao Command Center didn't have any on it. I guess sticking a tape over the LED is the only option? Any help is greatly appreciated! Thanks!

  Read the article

• Internet Explorer defaults to 64-bit version

  - by Tim Long

  My IE8 has suddenly started defaulting to the 64-bit version. I have no idea how or why this has happened, but I suspect it might be linked to the Browser Choice Screen that Microsoft was recently forced to display by EU law. However, many web sites will not display correctly in IE8 x64 (eg. sites that use Adobe Flash or Microsoft Silverlight). I have the 32-bit version of IE pinned to my taskbar and if I launch it manually, everything is fine. But when I click on a URL from another program and IE is not already running, then the 64-bit version gets launched. This really messes with programs like BBC iPlayer which rely heavily on Adbobe Air and Flash. So, how do I get IE8 32-bit version to be the default version again? I've tried using the "default programs" control panel and that doesn;t make any difference (in fact, it doesn't give the choice between x84 and x64 versions, it just lists "internet explorer").

  Read the article

• Problems with microphone and network

  - by AnoonymoouS

  Hello... very good day everybody! I'm having some problems regarding the Ubuntu 12.4.01 LTS. For this reason, cordially i ask everyone's help. Such problems can be summed up in network (01) and audio (02)! 01) I can not set a DSL network settings in the "upper bar" (on side the clock). When i create the connection, the system says that the cables modem are disconnected! I can only use the internet if i set up a connection at terminal through the command "pppoeconf". Follows the print screen of what i mentioned above:. http://i.imgur.com/8nTrF.png Obs.: Note that even after the connection "created", it does not appear there! 02) The sound is reproduced; however, can not be captured! I can not make recordings, obviously i can't use the microphone. I believe that something is giving interference or the settings are wrong! Follows the video of what i mentioned above:. http://dl.dropbox.com/u/41085750/Projeto%20Padr%C3%A3o.mp4 Obs.: I'm listening to music, so that interference errors may appear in the video. By kindness; who can help me... help me! I sought help at various sites and forums but unfortunately, i did not get success. I wait anxiously for a direction. Regards, Anoonymoous.

  Read the article

• Remove enemy when bullet hits enemy

  - by jordi12100

  For my education I have to make a basic game in HTML5 canvas. The game is a shooter game. When you can move left - right and space is shoot. When I shoot the bullets will move up. The enemy moves down. When the bullet hits the enemy the enemy has to dissapear and it will gain +1 score. But the enemy will dissapear after it comes up the screen. Demo: http://jordikroon.nl/test.html space = shoot + enemy shows up This is my code: for (i=0;i<enemyX.length;i++) { if(enemyX[i] > canvas.height) { enemyY.splice(i,1); enemyX.splice(i,1); } else { enemyY[i] += 5; moveEnemy(enemyX[i],enemyY[i]); } } for (i=0;i<bulletX.length;i++) { if(bulletY[i] < 0) { bulletY.splice(i,1); bulletX.splice(i,1); } else { bulletY[i] -= 5; moveBullet(bulletX[i],bulletY[i]); for (ib=0;ib<enemyX.length;ib++) { if(bulletX[i] + 50 < enemyX[ib] || enemyX[ib] + 50 < bulletX[i] || bulletY[i] + 50 < enemyY[ib] || enemyY[ib] + 50 < bulletY[i]) { ++score; enemyY.splice(i,1); enemyX.splice(i,1); } } } } Objects: function moveBullet(posX,posY) { //console.log(posY); ctx.arc(posX, (posY-150), 10, 0 , 2 * Math.PI, false); } function moveEnemy(posX,posY) { ctx.rect(posX, posY, 50, 50); ctx.fillStyle = '#ffffff'; ctx.fill(); }

  Read the article

• Unable to ping remote server Nagios

  - by williamsowen

  We've recently set up Nagios on one of our Amazon EC2 instances to act as a monitoring server to our other instances. nrpe was installed on our staging server stager and appears to be working fine: monitoring_server~: /usr/lib/nagios/plugins/check_nrpe -H xx.xx.xx.xx -p 5666 NRPE v2.12 The issue is - when viewing the remote server stager within the Nagios admin screen - it appears to be 'DOWN'. The check_ping command reveals: monitoring_server~: /usr/lib/nagios/plugins/check_ping -H 'xx.xx.xx.xx' -w 5000,100% -c 5000,100% -p 1 PING CRITICAL - Packet loss = 100%|rta=5000.000000ms;5000.000000;5000.000000;0.000000 pl=100%;100;100;0 Can anyone provide some direction on how to get this working? Not sure what else to do

  Read the article

• No virtual console on ubuntu 12.10

  - by Buzzzz

  When I try to do a ctr-alt f(1-6) in ubuntu 12.10 I only get a black screen with a blinking cursor but no login prompt. Any ideas on what could be wrong? It is a fresh install of 12.10 using a amd radeon 5850 graphics card. i have tried different things in my /etc/default/grub but at the moment I use the following: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash vga=normal" #GRUB_CMDLINE_LINUX="vga=0x0376" #RUB_CMDLINE_LINUX_DEFAULT="vga=0x014c" #GRUB_CMDLINE_LINUX="vga=0x014c" #GRUB_GFXPAYLOAD_LINUX=1600x1200x24 # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console

  Read the article

• Log Files from bash script output

  - by neildeadman

  I have a script that runs (this works fine). I'd like to produce logfiles from its output and still show it on screen. I have this command that creates three files from this blog: ((./fk.sh 2>&1 1>&3 | tee errors.log) 3>&1 1>&2 | tee output.log) 2>&1 | tee final.log This does exactly what I want it to. My only issue is that I create files in my script and copy them somewhere, and I'd like to copy these logfiles there too, which I can't do whilst this script is running. I also wanted to make it easier for any user to run my script, so I created another script to run this script. According to this post (see last post) I can put a . before the script name and I can use variables assigned in my called script from the first script if I use them in the first. It doesn't seem to work though and I can't figure out why or find alternative methods. Can anyone help?

  Read the article

• Problem with usb wireless mouse

  - by aiacet

  Recently I have started having problems with my wireless mouse (Wireless Optical Mouse MI-4910D). Sometimes when I start my PC or during a game the pointer/arrow stops moving. When the PC boots the pointer is locked in the center of the screen. If I'm lucky it helps to change the USB wireless adapter from port 1 to port 2 but sometimes this trick doesn't work and I have to restart my PC to get the mouse to work again. Like you can see in the product web page this mouse don't have a driver but only a tool to solve some problems. Thank you in advance to all the "super-users" that reading this question would be help me Ajax

  Read the article

• Volume display for laptop missing after driver update

  - by Cyclone

  I have a Dell Inspiron 1520, and I just updated my audio drivers to be able to use Stereo Mix. It's a SigmaTel audio driver. Prior to the update, whenever I used the hardware buttons to update volume or mute/unmute speakers, it would always have a nice display like this one: But, for volume instead of screen brightness. The hardware buttons still work fortunately, but the volume display is gone. Is there a place I can configure this setting and re-enable it? The speaker icon in task tray was also disabled with the update, but I re-enabled that from the Control Panel. Is this simply gone with the driver update? Thanks for the help!

  Read the article

• Installing Ubuntu on Asus G75VW (UEFI)

  - by user101653

  You all are my last hope... help! I bought an Asus G75VW from Best Buy. It has the new UEFI BIOS instead of the old style BIOS (1980's) and has Windows 8 preinstalled. I cannot get the G75VW to install Ubuntu 12.10 in EFI mode. I did get Ubuntu to load if I changed the BIOS to CSM and the computer sees and installs Ubuntu in "legacy mode". I attempted boot repair, and Ubuntu will load after 1 minute but as legacy BIOS only. If I changed the BIOS to UEFI "Binary is whitelisted" is displayed and I get a purple screen. My goal... keep my preinstalled Windows 8 on internal drive bay 1 and install Ubuntu 12.10 on internal drive bay 2... and somehow make a choice on which to choose. I am at a loss. I am a software programmer, but I am very bad at understanding BIOS and partitioning. Any ideas? Has anyone done what I want to do. This is a full second day on my "issue"! If I cannot get Ubuntu installed, I'm returning the laptop. And "wait" until these obstacles of UEFI/EFI and properly handled to allow people to load EFI based Ubuntu without a hitch. Thanks, Dave

  Read the article

• SSD install - what do I need to watch out for when reconfiguring SATA ports?

  - by tim11g

  I installed a Samsung 840 SSD in a Windows 7 machine. It seems to be working fine, but I'm not seeing the expected performance. The AS SSD benchmark gives 76 for read and 138 for write. At the upper left of the benchmark it says "pciide - BAD" and "31K - BAD". I'm assuming the "pciide BAD" means the motherboard (Gigabyte GA-P35-DS4) is configured as IDE emulation and needs to change to native SATA. I don't know what the "31K" refers to. The bios settings look like this: I saw this article that indicates that changing the SATA mode of the boot drive can cause problems (Blue Screen): Error message occurs after you change the SATA mode of the boot drive What is the correct procedure to change the SATA Mode without causing a system failure? Apply the registry change from the MSFT article above first, then reboot and change the SATA mode? Will the SATA mode change in the BIOS affect other drives?

  Read the article

• Get error (Repair Filesystem) 1 # when I install 4 new Hard drives in RedHat Linux 5 on a Dell PowerEdge 2900

  - by Alos Diallo

  Hi I am using a Dell PowerEdge 2900 running RedHat 5. I had 4 drives in the system using a Raid 5, I purchased and installed 4 more drives keeping the configuration the same. Set up the Vertual disks in PERC 6/i. When I exit out and reboot the system I get the following: fsck.ext3: No such file or dirrectory while trying open /dev/ddb1 [FAILED] ***An error occurred during the file system check. ***Dropping you to a shell; the system will reboot ***when you leave the shell. Then am prompted for the root pw. I enter it and am then prompted with: (Repair filesystem) 1# if I type fdisk -l I get some info on the disk along with: Disk /dev/sdb doesn't contain a valid partition table I am then prompted for (Repair filesystem) 2# If I reboot I am taken to the same screen again. The system was working before this happened. Does anyone know why this is happening and or what I can do to fix it? Thanks

  Read the article

• Why is my fresh install of 12.04 running slow?

  - by user75129

  Hey guys I'm a new linux user, I figured it would be the best for the laptop I just purchased because it's said to be faster than Windows 7. I'm currently dual-booting with Windows 7 Professial and Ubuntu 12.04. The laptop I am using is the LG X Note P210 Specs: Intel Core i5 470UM Dual Core clocked at 1.33GHz 12.5" HD LED LCD Screen at 1366 by 768 4GB DDR3 @ 1333 MHz RAM Integrated Intel HD Graphics Card 4 Cell Battery with 3150mAh It comes loaded Windows 7 Home Premium 64-Bit, it runs fine on that but my Ubuntu 12.04 runs slower than it and I don't understand why, it definitely has decent specs to run even a 64-bit operating system and do some gaming. Granted I know it's not the best but for a laptop it does the job so Ubuntu should work especially since it's said to make older units with worse specs run even better. I'm not all that familiar with coding and all so what are things I can do to optimize speed without overclocking? Boot up is fine, its program response time I believe, once Im in the actual OS, it lags, slows down, apps stop working, take forever to load up apps.

  Read the article

• Simple multi-seat

  - by Oli

  I've asked about multiseat before. The answer (for 10.04) involved doing it the proper way (eg through gdm, multiple server layouts). The problem was that gdm needs to be patched or reverted to 2.20 for multiseat. It's an ugly hack that, worse than anything, will hold up future updates. As a result, I didn't do anything. I still have a spare video card. I still have the monitor, keyboard and mouse all sitting waiting to jump into action. And I still want to be able to turn that into a simple desktop. My needs don't seem complicated. I have a second video card, a USB hub and anything connected to that USB hub that I want to be dedicated to another X server. I don't need a login screen (I'm happy hard-coding in a auto-login and I'd be happy with the user starting the X server if that's possible). This is so simple in my head that I only need two questions: How can I explicitly start an X server from the command line on an unused video adapter (by passing it whatever configuration I need to)? Can I have this new X session load a desktop environment on load? This seems like something you should be able to write in a little upstart script within 10 minutes. That would be perfect for me as then I'd have a nice start/stop control over the secondary desktop from the main desktop (that I want to leave unscathed!) I'm thinking something as simple as this for the payload: su -u other_user -c "startx -- localhost hardware-information" And use .xinitrc to load openbox or something...

  Read the article

• Game Input mouse filtering

  - by aaron

  I'm having a problem with filtering mouse inputs, the method I am doing right know moves the cursor back to the center of the screen each frame. But I cant do this because it messes with other things. Does anyone know how to implement this with delta mouse movement. Here is the relevant code. void update() { static float oldX = 0; static float oldY = 0; static float walkSpeed = .05f; static float sensitivity = 0.002f;//mouse sensitivity static float smooth = 0.7f;//mouse smoothing (0.0 - 0.99) float w = ScreenResolution.x/2.0f; float h = ScreenResolution.y/2.0f; Vec2f scrc(w,h); Vec2f mpos(getMouseX(),getMouseY()); float x = scrc.x-mpos.x; float y = scrc.y-mpos.y; oldX = (oldX*smooth + x*(1.0-smooth)); oldY = (oldY*smooth + y*(1.0-smooth)); x = oldX * sensitivity; y = oldY * sensitivity; camera->rotate(Vec3f(y,0,0)); transform->setRotation(transform->getRotation()*Quaternionf::fromAxisAngle(0.0f,1.0f,0.0f,-x)); setMousePosition((int)scrc.x,(int)scrc.y);//THIS IS THE PROBLEM LINE HOW CAN I AVOID THIS .... }

  Read the article

• Ubuntu 12.04 using b43-fwcutter

  - by Nathan

  I have used 10.04 with the b43-fwcutter driver to drive my BCM4318 Broadcom card (a Linksys WPC54G v3) on my old Dell Inspiron 8100 for two years+ with no troubles. I just upgraded to 12.04 and although everything worked fine after install, before I added the b43-fwcutter driver, once I installed the driver, the system refuses to boot. Even before I install the Linksys card!! It just hangs on boot with graphical garbage on the screen. I tried several attempts to recover the system using the live CD, and finally reinstalled completely. I have been thru the cycle, install fresh system, verify everything works, then install b43-fwcutter and it is hung, several times. Consistent hard fail. The system runs fine on hardwire Ethernet, and wireless was fine on 10.04. But I cannot get there with 12.04. So after several attempts, I am now ready to admit defeat and ask for help. I have read every thread that search turned up, and either the advice is to do what I did, i.e. install fwcutter, or does not apply (Different Broadcom, STA, legacy, whatever) So what do I need to do to fix it? Or is the B43-fwcutter driver broken for 12.04? Thoughts? Tips? Log files needed??

  Read the article

• Pandaboard crash on startup or freeze after minutes

  - by Meach

  I just received my Pandaboard ES (rev B) and I am having trouble after installing ubuntu-omap4-addons. Once I copied the image ubuntu-12.04-preinstalled-desktop-armhf+omap4.img on my sd card and boot the pandaboard with it, I run the following commands: sudo add-apt-repository ppa:tiomap-dev/release sudo apt-get update sudo apt-get dist-upgrade sudo apt-get install ubuntu-omap4-extras At the end of the installation of ubuntu-omap4-extras, Ubuntu tells me that a problem occurs when the console displays: ldconfig deferred processing now taking place Clicking on "report the problem" tell me that the problem concerns pvr-omap4-dkms. I read somewhere that this can happen and it is better to reinstall pvr-omap4-dkms. Which I am doing by running: sudo apt-get install --reinstall pvr-omap4-dkms I reboot. Then the board has sometimes difficulties to start Ubuntu: it freezes during the loading page, only action I can do is unplugging the board to start it again. Some other times, Ubuntu load successfully but then freeze at another random time, in the range 20 - 40 minutes. I searched on internet for similar bug and found this: https://bugs.launchpad.net/ubuntu/+source/linux-ti-omap4/+bug/971091 So I typed this in: update-rc.d ondemand disable apt-get -y install cpufrequtils echo 'ENABLE="true" GOVERNOR="performance" MAX_SPEED="0" MIN_SPEED="0"' > /etc/default/cpufrequtils cpufreq-set -r -g performance reboot But it doesn't seems to fix the bug. Another detail: on startup, before the loading screen of Ubuntu (when there is the two penguins displayed :)), it shows this: [0.297271] CPU1: Unknown IPI message 0x1 [0.308990] omap_hwmod: mcpdm: _wait_target_ready error: -16 [0.354705] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [0.354766] omap_hwmod_mux_init: Could not allocate device mux entry [2.107086] thermal_get_slope:Getting slope is not supported for domain gpu [2.107116] thermal_get_offset:Getting offset is not supported for domain gpu [2.107299] stm_fw: vendor driver stm_ti1.0 registered [8.725555] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! debug=0 Any idea what can be wrong? I am not that good with Ubuntu so any help will be appreciated. Cheers! Meach

  Read the article

• Getting "Unable to find a medium containing a live file system" when installing 10.10

  - by Krastin Konstantinov

  I got this error while trying to install ubuntu 10.10 from a bootable USB stick on to Sony Vaio P series laptop. The disk boots into the language and installation type screen. After that it goes through the splash and pulls up this error: BusyBox v1.13.3 (Ubuntu 1:1.13.3-ubuntu11) built in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) Unable to find a medium containing a live file system After getting this error the installation fails to start. I have used the same USB stick on some other laptops and the installation started as usual. Any help will be appreciated. My installation is i386 and my machine is Vaio P VGN-P610. I've tried every possible thing: Bios: [enable boot external] Boot order: [external] [hard drive] [network boot] Tried 2 different USB drives Tried 2 different external CD drives Tried 6 different downloads of both the desktop and netbook remix. All downloads were checked with MD5SUM. Ubuntu Desktop 9.10 installs properly in every version and from every source. Getting reaaaally frustrated.

  Read the article

• Arch Linux shows a blinking cursor instead of a booting installer

  - by fakedrake

  Arch Linux shows a blinking cursor instead of a booting installer. I ran sudo dd if=archlinux-2010.05-core-i686.iso of=/dev/sdb1 and checked the MD5 sums. I tried to boot it on two different PCs and got the same result: instead of booting GRUB — or anything useful, for that matter — it just showed a blinking cursor at the top left corner of the screen. The machines became unresponsive to any kind of input, the flash drive LED didn't seem to blink or shiver at all and there seemed to be no other activity whatsoever. I tried using another flash drive, but the machine completely ignored it, booting Windows "normally."

  Read the article

• Windows 7 on 1st Gen Macbook Pro (Q4-2008), power management problems.

  - by typemismatch

  I have the first generation macbook pro, purchased Q4 2008. I've been trying to run Windows 7 and can get it all installed great with the BootCamp 3.1 64 bit drivers however ... power management isn't great. The screen and keyboard don't automatically dim - the laptop gets too hot. I noticed on some newer macbook pros that windows 7 works perfectly and the above doesn't happen. Does anyone know if there really is a hardware issue with this 1st gen or is there some firmware update I can use to fix this? Thanks!

  Read the article

• Can't display at full resolution on an external monitor from my MacBook.

  - by Ramblingwood

  I have a 24" Asus V246H and a new MacBook ($999 one). I am trying to display to display to my Asus at 1080p via VGA. So I boot up with the lid closed and the external monitor plugged in. Everything boots up fine, but the resolution is really low. So I go in and change the resolution to be 1920x1080. My monitor then has a blue box on it that says "OUT OF RANGE". Lower resolutions like 1024x768 work, but 1680x1050 doesn't. If I try mirroring my displays, the entire external monitor AND the entire laptop screen is completely garbled. I can make out some colors, but it is completely unusable. I am suspecting that it simply won't work via VGA, but I don't want to buy another adapter, and my PC is using the DVI port. Any solutions?

  Read the article

• Running Android emulator inside a Virtualbox Vm

  - by sgargan

  I'm trying to setup a VM with a complete android development stack (SDK, Platforms, Eclipse etc) for a Hackathon. I'm having real trouble getting the emulator to start in the VM. I realize that the emulator is essentially a VM itself inside the Vbox VM and so is going to be slow, but it just hangs at the Android splash screen and never gets any further. Might there be something going on with the VM that is causing it to run so very slowly? Is there anything I can do to give the VM more CPU? I've tried setting the execution cap to 100% but it didn't help any. Anyone know what might be going on here, or have any ideas about how I might speed it up? Thanks Steve.

  Read the article

< Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >