Search Results

Search found 43645 results on 1746 pages for 'student question'.

Page 480/1746 | < Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >

  • Exchange ActiveSync is not working with Android's 'verify certificate' setting, what do I need to do to make them work together?

    - by Yannone
    All other methods of Activesync and web access to my Exchange server are working fine with no errors or issues, but when we attempt to configure Android phones for the server, it will only work with 'verify certificate' checked off. Ideally, I'd like my users to be able to use the default configuration, which includes the 'Verify Certificate' option. My primary question is: 'What does Verify Certificate do?', as I imagine if I knew that, I might have some idea why it isn't working.

    Read the article

  • raid 0 failure, drives look fine

    - by Alan
    Hello, after a lovely blue screen my vista 64 machine decided to reconfigure one of my drives to no longer be part of my raid volume. So now my raid fails as it only has one member disk. This happened to me about 6 months ago and I just changed the disk in question back to a raid disk and all was well. However I cant seem to find that option in my bios or raid config anymore :( Any help would be appreciated

    Read the article

  • "Upgrading" SQL Server 2008 180-day Evaluation to Licenced Standard Edition

    - by alsan
    Hello, I run into the same issue as someone who posted this question on experts-exchange.com (couldn't read the answer though as I don't have an account there): {Quote Begin} I noticed that the 180-day Evaluation version of SQL Server 2008 is the Enterprise version. Is there going to be any problem "upgrading" the Evaluation Enterprise version to a licensed STANDARD version (and how much additional stuff is going to be left inactive on my disk and, more importantly, in my registry, etc. if I do so)? {Quote End} Any advice is appreciated.

    Read the article

  • How do I redirect www to non-www in Route53?

    - by fredley
    I host my site at domain.com. My DNS entries in Route53 are as follows: domain.com A xxx.xxx.xxx.xxx 300 domain.com NS stuff.awsdns-47.org 172800 domain.com SOA stuff.awsdns-47.org 900 I would like to redirect traffic from www.domain.com to domain.com, as currently this just returns a 404. This question on SO suggested a PTR record, and I added that: www.domain.com PTR domain.com 300 but it didn't work. What should I be doing?

    Read the article

  • Copying info from the device manager to the clipboard

    - by user12816
    I have a Logitech webcam, which I can plug into my Windows XP machine via USB. When I open the Device Manager, I can select the webcam and choose Properties--Driver--Driver Details. This gives me the following list of driver filenames: C:\Program Files\Common Files\logishrd\WUApp32.exe [25 more filenames...] C:\WINDOWS\TWAIN_32\QuickCam\reset.wav My question is, is there any way to copy this list to the clipboard? Copying it by hand is a drag.

    Read the article

  • DVD-Player "Simulation"

    - by SjoerdV
    This may sound like a strange question, but I was wondering if there is software available which can emulate the behaviour of standalone dvd-players. I'm currently debugging a DVD we're creating, and I can't afford to go hopping to my house every time to check. The reason I'm asking is because the problems just appear on 'some' dvd-players which I cannot predict. Other option maybe, is there software that can check a VIDEO_TS folder or iso file for errors?

    Read the article

  • How to configure LAN controller to run at 1Gbps connectivity?

    - by Metro Smurf
    I have a few computers connected through a Gigabit router which show 1Gbps connections. However, one of the computers only shows 100Mbps connectivity even though it is capable of 1Gbps. I am not seeing an errors in the event viewer. Computer Specs Windows XP SP3 x86 A8N-SLI Premium MoBo Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller Driver: Marvell v11.24.3.3 (2/15/2010) Networking Specs Netgear RangeMax Premium Wireless-N Gigabit Router (WNR3500) CAT6 wiring Question: How can I configure the above computer to run at 1Gbps connectivity like the others?

    Read the article

  • How to run Tunderbird 3 on Ubuntu

    - by Dasoal
    Hi guys, This is a bit of a silly question, how do I run Thunderbird 3 which I downloaded? Well, I can get it to run by executing the 'thunderbird' shell script file. However that creates a terminal windows aswell and will close Thunderbird if it is closed. How do I get it to open without the terminal? Thanks.

    Read the article

  • How can I roll back 1 commit?

    - by n179911
    I have 2 commits that I did not push: $ git status # On branch master # Your branch is ahead of 'faves/master' by 2 commits. How can I roll back my first one (the oldest one), but keep the second one? $ git log commit 3368e1c5b8a47135a34169c885e8dd5ba01af5bb ... commit baf8d5e7da9e41fcd37d63ae9483ee0b10bfac8e ... From here: http://friendfeed.com/harijay/742631ff/git-question-how-do-i-rollback-commit-just-want Do I just need to do: git reset --hard baf8d5e7da9e41fcd37d63ae9483ee0b10bfac8e That is?

    Read the article

  • using git for media libraries

    - by mpapis
    Rationale: I want to manage libraries of media files (music, images) using git, there is git-annex but it requires haskel platform - but they do not play together well (also it's quite to big dependency for me). Question: Is there any other plugin with this functionality, or possibly would it be possible to write such plugin (resources?). Similar questions: Self-hosted, cross-platform repository for large files Using Git to Manage An iTunes Library?

    Read the article

  • IIS serving locally, but not remotely

    - by cinqoTimo
    There is a router between the modem and the server. In the admin panel, I use single-port forward Internal Port External Port IP 80 80 to 192.168.1.100 (Web Server) Basically, I'm not on site, and there is a local IT person who is supposed to have this ready. I saw the port forward page, and it was configured as described above. So my question is, the only other thing it could be is firewall software, or some other device on the network that their not telling me about, right?

    Read the article

  • Routing between same networks

    - by osmandfj
    I have two different sites: NetA has a subnet 192.168.2.0/24 NetB has 192.168.1.0/24. The two sites connect each other via IPsec VPN with fortigate devices. I need to move a server with IP address 192.168.2.240 from NetA to NetB and I cannot change its IP address due to some specific reasons. My question is; if I move that server from NetA to NetB, is it possible to reach that server from NetA?

    Read the article

  • What is the best way to migrate to a new file share in a new domain?

    - by cbattlegear
    I am looking to move a file share (100 GB or so) from one domain/server to a new domain and server. I would like to do this with little to no downtime and if possible I would like to be able to map permissions from the groups/users in the current system to groups/users in the new domain. A side question, a large number of the files in the system are office documents with hard links to the old file server. Any way to programmatically change all those links to the new file server?

    Read the article

  • How (in terms of which parameters) is a "professional-grade" broadband connection different from a "consumer" one?

    - by odemarken
    By "professional" I mean here: The kind you can get at a datacenter for your server The kind you can get at an office that would be good enough for hosting web and mail server with low to medium traffic. (Please ignore other aspects of "the self-hosting problem" and focus only on broadband connection quality). Another way to frame this question would be "what parameters should office broadband have to compare to a datacenter-provided one for the purposes of self-hosting". The knowledge I have gathered so far is in answer format below.

    Read the article

  • Stop that programming from running when i plug in my iPhone

    - by codingguy3000
    I know that this is not exactly a programming question, but this is pretty geeky stuff so please don't vote me down. When ever I plug in my iPhone into my work computer Word 2007 decides it wants to start up. How do I make it stop? Is it a registry deal, or is there an windows interface that I'm unaware of. I'm on Win XP SP3 by the way. Thanks

    Read the article

  • source command in Linux

    - by Rodnower
    My question is: why if I run some file with name aliases for example with content such as: alias lsa="ls -a" directly: $ ./aliases it don't create the alias (may be only in script context). But if I run it with command "source": $ source aliases it do the work? I mean after execution the alias "lsa" existing in context of command shell? "man source" give: "No manual entry for source", and in google I just found that it runs Tcl, but why Tcl influence shell context and bush not?

    Read the article

  • Detection of battery status totally messed up

    - by Faabiioo
    I already posted this question in the Ubuntu forum and stackOverflow. I forward it here with the hope to find some different opinions about the problem. I have an Acer TravelMate 5730, which is 3 y.o., running Ubuntu 10.04 LTS. One year ago I changed the battery because the old one died. Since then, everything worked like a charm. A week ago I was using my laptop running on battery; it was charged up to 60%. Suddenly it shut down and for about 24h it was like the battery was totally broken: it didn't charge anymore and the 'upower --dump' said state: critical. I was kind of resigned to buy a new battery, when suddenly the orange light became green: battery was charged and actually working; strangely the battery indicator was stuck to 100%, even after 2 hours running. I tried again with 'upower --dump' or 'acpi -b' commands and it kept saying battery is discharging, though maintaining the percentage to 100%. Thus, battery working fine up to 3 hours, without any warning when it was almost empty, likely to result in a brute shut down. Today something different. the 'upower --dump' command says: ... present: yes rechargeable: yes state: fully-charged energy: 0 Wh energy-empty: 0 Wh energy-full: 65.12 Wh energy-full-design: 65.12 Wh energy-rate: 0 W voltage: 14.481 V percentage: 0% capacity: 100% technology: lithium-ion I tried to boot WinXP and the problem is pretty much the same, with the battery fully-charged, percentage equal to 0% and no way to fix it. While writing, the situation has changed again: present: yes rechargeable: yes state: charging energy: 0 Wh energy-empty: 0 Wh energy-full: 65.12 Wh energy-full-design: 65.12 Wh energy-rate: 0 W voltage: 14.474 V percentage: 0% capacity: 100% technology: lithium-ion ...charging, but it does not charge up. (Recall, the battery lasted 3 hours until yesterday!). So, the big question is: is it an hardware issue, like a dedicated internal circuit is broken? or maybe it is just the battery that must be changed. Or, rather, some BIOS problem that could be fixed in some way. I'd appreciate every help that can shed some light on this annoying problem thanks

    Read the article

  • Trying to install a freshly built RPM but it says it is dependent on a lib it should not be dependent on

    - by LouisC
    The package in question is samba-3.6.7. I've built the package successfully, but when trying to install it, it returns, error: failed dependencies: libtalloc.so.1 is needed by samba-3.6.7 I have no clue why this happens. libtalloc.so.1 is provided by my current samba package (which I am replacing), but this new samba provides libtalloc.so and libtalloc.so.2. Why is it still dependent on libtalloc.so.1 and how can I fix it? Thanks :)

    Read the article

  • Adding additional locations to Office 2013 save "Places"

    - by Paperjam
    When saving a document in Office, you are given the option of saving locally or to your SkyDrive account. Presumably, it's possible to add additional locations to this menu (Dropbox, etc.). Is this possible in the Live Preview, and how does one accomplish this? Edit: when I asked this question, I was not logged into a Live account. I have since logged in and discovered services may be added to the logged-in account, however Dropbox (and non-MS services) are not offered. Account settings:

    Read the article

< Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >