Search Results

Search found 40226 results on 1610 pages for 'object relational model'.

Page 481/1610 | < Previous Page | 477 478 479 480 481 482 483 484 485 486 487 488  | Next Page >

• SQL SERVER – How to Roll Back SQL Server Database Changes

  - by Pinal Dave

  In a perfect scenario, no unexpected and unplanned changes occur. There are no unpleasant surprises, no inadvertent changes. However, even with all precautions and testing, there is sometimes a need to revert a structure or data change. One of the methods that can be used in this situation is to use an older database backup that has the records or database object structure you want to revert to. For this method, you have to have the adequate full database backup and a tool that will help you with comparison and synchronization is preferred. In this article, we will focus on another method: rolling back the changes. This can be done by using: An option in SQL Server Management Studio T-SQL, or ApexSQL Log The first two solutions have been described in this article The disadvantages of these methods are that you have to know when exactly the change you want to revert happened and that all transactions on the database executed in a specific time range are rolled back – the ones you want to undo and the ones you don’t. How to easily roll back SQL Server database changes using ApexSQL Log? The biggest challenge is to roll back just specific changes, not all changes that happened in a specific time range. While SQL Server Management Studio option and T-SQL read and roll forward all transactions in the transaction log files, I will show you a solution that finds and scripts only the specific changes that match your criteria. Therefore, you don’t need to worry about all other database changes that you don’t want to roll back. ApexSQL Log is a SQL Server disaster recovery tool that reads transaction logs and provides a wide range of filters that enable you to easily rollback only specific data changes. First, connect to the online database where you want to roll back the changes. Once you select the database, ApexSQL Log will show its recovery model. Note that changes can be rolled back even for a database in the Simple recovery model, when no database and transaction log backups are available. However, ApexSQL Log achieves best results when the database is in the Full recovery model and you have a chain of subsequent transaction log backups, back to the moment when the change occurred. In this example, we will use only the online transaction log. In the next step, use filters to read only the transactions that happened in a specific time range. To remove noise, it’s recommended to use as many filters as possible. Besides filtering by the time of the transaction, ApexSQL Log can filter by the operation type: Table name: As well as transaction state (committed, aborted, running, and unknown), name of the user who committed the change, specific field values, server process IDs, and transaction description. You can select only the tables affected by the changes you want to roll back. However, if you’re not certain which tables were affected, you can leave them all selected and once the results are shown in the main grid, analyze them to find the ones you to roll back. When you set the filters, you can select how to present the results. ApexSQL Log can automatically create undo or redo scripts, export the transactions into an XML, HTML, CSV, SQL, or SQL Bulk file, and create a batch file that you can use for unattended transaction log reading. In this example, I will open the results in the grid, as I want to analyze them before rolling back the transactions. The results contain information about the transaction, as well as who and when made it. For UPDATEs, ApexSQL Log shows both old and new values, so you can easily see what has happened. To create an UNDO script that rolls back the changes, select the transactions you want to roll back and click Create undo script in the menu. For the DELETE statement selected in the screenshot above, the undo script is: INSERT INTO [Sales].[PersonCreditCard] ([BusinessEntityID], [CreditCardID], [ModifiedDate]) VALUES (297, 8010, '20050901 00:00:00.000') When it comes to rolling back database changes, ApexSQL Log has a big advantage, as it rolls back only specific transactions, while leaving all other transactions that occurred at the same time range intact. That makes ApexSQL Log a good solution for rolling back inadvertent data and schema changes on your SQL Server databases. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: ApexSQL

  Read the article

• Writing an unthemed view while still using Orchard shapes and helpers

  - by Bertrand Le Roy

  This quick tip will show how you can write a custom view for a custom controller action in Orchard that does not use the current theme, but that still retains the ability to use shapes, as well as zones, Script and Style helpers. The controller action, first, needs to opt out of theming: [Themed(false)] public ActionResult Index() {} .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Then, we still want to use a shape as the view model, because Clay is so awesome: private readonly dynamic _shapeFactory; public MyController(IShapeFactory shapeFactory) { _shapeFactory = shapeFactory; } [Themed(false)] public ActionResult Index() { return View(_shapeFactory.MyShapeName( Foo: 42, Bar: "baz" )); } As you can see, we injected a shape factory, and that enables us to build our shape from our action and inject that into the view as the model. Finally, in the view (that would in Views/MyController/Index.cshtml here), just use helpers as usual. The only gotcha is that you need to use “Layout” in order to declare zones, and that two of those zones, Head and Tail, are mandatory for the top and bottom scripts and stylesheets to be injected properly. Names are important here. @{ Style.Include("somestylesheet.css"); Script.Require("jQuery"); Script.Include("somescript.js"); using(Script.Foot()) { <script type="text/javascript"> $(function () { // Do stuff }) </script> } } <!DOCTYPE html> <html> <head> <title>My unthemed page</title> @Display(Layout.Head) </head> <body> <h1>My unthemed page</h1> <div>@Model.Foo is the answer.</div> </body> @Display(Layout.Tail) </html> Note that if you define your own zones using @Display(Layout.SomeZone) in your view, you can perfectly well send additional shapes to them from your controller action, if you injected an instance of IWorkContextAccessor: _workContextAccessor.GetContext().Layout .SomeZone.Add(_shapeFactory.SomeOtherShape()); Of course, you’ll need to write a SomeOtherShape.cshtml template for that shape but I think this is pretty neat.

  Read the article

• Very slow KVM in Ubuntu 12.04

  - by Guy Fawkes

  I use Ubuntu 12.04 64-bit and KVM, my CPU is Core i5 3.3 GHz and I have 8 GB of DDR3 RAM. I run Windows 7 in KVM and it's extremely slow. My co-worker use Debian on the same PC configuration and can run Windows 7 extremely fast! Where can be my problem? sudo cat /etc/libvirt/qemu/windows.xml <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh edit windows or other application using the libvirt API. --> <domain type='kvm'> <name>windows</name> <uuid>5c685175-baea-0ca6-591f-8269d923ffb8</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/windows.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='network'> <mac address='52:54:00:94:63:91'/> <source network='default'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <sound model='ich6'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='vga' vram='262144' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain>

  Read the article

• Simple MVVM Walkthrough – Refactored

  - by Sean Feldman

  JR has put together a good introduction post into MVVM pattern. I love kick start examples that serve the purpose well. And even more than that I love examples that also can pass the real world projects check. So I took the sample code and refactored it slightly for a few aspects that a lot of developers might raise a brow. Michael has mentioned model (entity) visibility from view. I agree on that. A few other items that don’t settle are using property names as string (magical strings) and Saver class internal casting of a parameter (custom code for each Saver command). Fixing a property names usage is a straight forward exercise – leverage expressions. Something simple like this would do the initial job: class PropertyOf<T> { public static string Resolve(Expression<Func<T, object>> expression) { var member = expression.Body as MemberExpression; return member.Member.Name; } } With this, refactoring of properties names becomes an easy task, with confidence that an old property name string will not get left behind. An updated Invoice would look like this: public class Invoice : INotifyPropertyChanged { private int id; private string receiver; public event PropertyChangedEventHandler PropertyChanged; private void OnPropertyChanged(string propertyName) { if (PropertyChanged != null) { PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); } } public int Id { get { return id; } set { if (id != value) { id = value; OnPropertyChanged(PropertyOf<Invoice>.Resolve(x => x.Id)); } } } public string Receiver { get { return receiver; } set { receiver = value; OnPropertyChanged(PropertyOf<Invoice>.Resolve(x => x.Receiver)); } } } For the saver, I decided to change it a little so now it becomes a “view-model agnostic” command, one that can be used for multiple commands/view-models. Updated Saver code now accepts an action at construction time and executes that action. No more black magic internal class Command : ICommand { private readonly Action executeAction; public Command(Action executeAction) { this.executeAction = executeAction; } public bool CanExecute(object parameter) { return true; } public event EventHandler CanExecuteChanged; public void Execute(object parameter) { // no more black magic executeAction(); } } Change in InvoiceViewModel is instantiation of Saver command and execution action for the specific command. public ICommand SaveCommand { get { if (saveCommand == null) saveCommand = new Command(ExecuteAction); return saveCommand; } set { saveCommand = value; } } private void ExecuteAction() { DisplayMessage = string.Format("Thanks for creating invoice: {0} {1}", Invoice.Id, Invoice.Receiver); } This way internal knowledge of InvoiceViewModel remains in InvoiceViewModel and Command (ex-Saver) is view-model agnostic. Now the sample is not only a good introduction, but also has some practicality in it. My 5 cents on the subject. Sample code MvvmSimple2.zip

  Read the article

• Designing status management for a file processing module

  - by bot

  The background One of the functionality of a product that I am currently working on is to process a set of compressed files ( containing XML files ) that will be made available at a fixed location periodically (local or remote location - doesn't really matter for now) and dump the contents of each XML file in a database. I have taken care of the design for a generic parsing module that should be able to accommodate the parsing of any file type as I have explained in my question linked below. There is no need to take a look at the following link to answer my question but it would definitely provide a better context to the problem Generic file parser design in Java using the Strategy pattern The Goal I want to be able to keep a track of the status of each XML file and the status of each compressed file containing the XML files. I can probably have different statuses defined for the XML files such as NEW, PROCESSING, LOADING, COMPLETE or FAILED. I can derive the status of a compressed file based on the status of the XML files within the compressed file. e.g status of the compressed file is COMPLETE if no XML file inside the compressed file is in a FAILED state or status of the compressed file is FAILED if the status of at-least one XML file inside the compressed file is FAILED. A possible solution The Model I need to maintain the status of each XML file and the compressed file. I will have to define some POJOs for holding the information about an XML file as shown below. Note that there is no need to store the status of a compressed file as the status of a compressed file can be derived from the status of its XML files. public class FileInformation { private String compressedFileName; private String xmlFileName; private long lastModifiedDate; private int status; public FileInformation(final String compressedFileName, final String xmlFileName, final long lastModified, final int status) { this.compressedFileName = compressedFileName; this.xmlFileName = xmlFileName; this.lastModifiedDate = lastModified; this.status = status; } } I can then have a class called StatusManager that aggregates a Map of FileInformation instances and provides me the status of a given file at any given time in the lifetime of the appliciation as shown below : public class StatusManager { private Map<String,FileInformation> processingMap = new HashMap<String,FileInformation>(); public void add(FileInformation fileInformation) { fileInformation.setStatus(0); // 0 will indicates that the file is in NEW state. 1 will indicate that the file is in process and so on.. processingMap.put(fileInformation.getXmlFileName(),fileInformation); } public void update(String filename,int status) { FileInformation fileInformation = processingMap.get(filename); fileInformation.setStatus(status); } } That takes care of the model for the sake of explanation. So whats my question? Edited after comments from Loki and answer from Eric : - I would like to know if there are any existing design patterns that I can refer to while coming up with a design. I would also like to know how I should go about designing the status management classes. I am more interested in understanding how I can model the status management classes. I am not interested in how other components are going to be updated about a change in status at the moment as suggested by Eric.

  Read the article

• My frustum culling is culling from the wrong point

  - by Xbetas

  I'm having problems with my frustum being in the wrong origin. It follows the rotation of my camera but not the position. In my camera class I'm generating a view-matrix: void Camera::Update() { UpdateViewMatrix(); glMatrixMode(GL_MODELVIEW); //glLoadIdentity(); glLoadMatrixf(GetViewMatrix().m); } Then extracting the planes using the projection matrix and modelview matrix: void UpdateFrustum() { Matrix4x4 projection, model, clip; glGetFloatv(GL_PROJECTION_MATRIX, projection.m); glGetFloatv(GL_MODELVIEW_MATRIX, model.m); clip = model * projection; m_Planes[RIGHT][0] = clip.m[ 3] - clip.m[ 0]; m_Planes[RIGHT][1] = clip.m[ 7] - clip.m[ 4]; m_Planes[RIGHT][2] = clip.m[11] - clip.m[ 8]; m_Planes[RIGHT][3] = clip.m[15] - clip.m[12]; NormalizePlane(RIGHT); m_Planes[LEFT][0] = clip.m[ 3] + clip.m[ 0]; m_Planes[LEFT][1] = clip.m[ 7] + clip.m[ 4]; m_Planes[LEFT][2] = clip.m[11] + clip.m[ 8]; m_Planes[LEFT][3] = clip.m[15] + clip.m[12]; NormalizePlane(LEFT); m_Planes[BOTTOM][0] = clip.m[ 3] + clip.m[ 1]; m_Planes[BOTTOM][1] = clip.m[ 7] + clip.m[ 5]; m_Planes[BOTTOM][2] = clip.m[11] + clip.m[ 9]; m_Planes[BOTTOM][3] = clip.m[15] + clip.m[13]; NormalizePlane(BOTTOM); m_Planes[TOP][0] = clip.m[ 3] - clip.m[ 1]; m_Planes[TOP][1] = clip.m[ 7] - clip.m[ 5]; m_Planes[TOP][2] = clip.m[11] - clip.m[ 9]; m_Planes[TOP][3] = clip.m[15] - clip.m[13]; NormalizePlane(TOP); m_Planes[NEAR][0] = clip.m[ 3] + clip.m[ 2]; m_Planes[NEAR][1] = clip.m[ 7] + clip.m[ 6]; m_Planes[NEAR][2] = clip.m[11] + clip.m[10]; m_Planes[NEAR][3] = clip.m[15] + clip.m[14]; NormalizePlane(NEAR); m_Planes[FAR][0] = clip.m[ 3] - clip.m[ 2]; m_Planes[FAR][1] = clip.m[ 7] - clip.m[ 6]; m_Planes[FAR][2] = clip.m[11] - clip.m[10]; m_Planes[FAR][3] = clip.m[15] - clip.m[14]; NormalizePlane(FAR); } void NormalizePlane(int side) { float length = 1.0/(float)sqrt(m_Planes[side][0] * m_Planes[side][0] + m_Planes[side][1] * m_Planes[side][1] + m_Planes[side][2] * m_Planes[side][2]); m_Planes[side][0] /= length; m_Planes[side][1] /= length; m_Planes[side][2] /= length; m_Planes[side][3] /= length; } And check against it with: bool PointInFrustum(float x, float y, float z) { for(int i = 0; i < 6; i++) { if( m_Planes[i][0] * x + m_Planes[i][1] * y + m_Planes[i][2] * z + m_Planes[i][3] <= 0 ) return false; } return true; } Then i render using: camera->Update(); UpdateFrustum(); int numCulled = 0; for(int i = 0; i < (int)meshes.size(); i++) { if(!PointInFrustum(meshCenter.x, meshCenter.y, meshCenter.z)) { meshes[i]->SetDraw(false); numCulled++; } else meshes[i]->SetDraw(true); } What am i doing wrong?

  Read the article

• My frustum culling is culling from the wrong point [SOLVED]

  - by Xbetas

  I'm having problems with my frustum being in the wrong origin. It follows the rotation of my camera but not the position. In my camera class I'm generating a view-matrix: void Camera::Update() { UpdateViewMatrix(); glMatrixMode(GL_MODELVIEW); //glLoadIdentity(); glLoadMatrixf(GetViewMatrix().m); } Then extracting the planes using the projection matrix and modelview matrix: void UpdateFrustum() { Matrix4x4 projection, model, clip; glGetFloatv(GL_PROJECTION_MATRIX, projection.m); glGetFloatv(GL_MODELVIEW_MATRIX, model.m); clip = model * projection; m_Planes[RIGHT][0] = clip.m[ 3] - clip.m[ 0]; m_Planes[RIGHT][1] = clip.m[ 7] - clip.m[ 4]; m_Planes[RIGHT][2] = clip.m[11] - clip.m[ 8]; m_Planes[RIGHT][3] = clip.m[15] - clip.m[12]; NormalizePlane(RIGHT); m_Planes[LEFT][0] = clip.m[ 3] + clip.m[ 0]; m_Planes[LEFT][1] = clip.m[ 7] + clip.m[ 4]; m_Planes[LEFT][2] = clip.m[11] + clip.m[ 8]; m_Planes[LEFT][3] = clip.m[15] + clip.m[12]; NormalizePlane(LEFT); m_Planes[BOTTOM][0] = clip.m[ 3] + clip.m[ 1]; m_Planes[BOTTOM][1] = clip.m[ 7] + clip.m[ 5]; m_Planes[BOTTOM][2] = clip.m[11] + clip.m[ 9]; m_Planes[BOTTOM][3] = clip.m[15] + clip.m[13]; NormalizePlane(BOTTOM); m_Planes[TOP][0] = clip.m[ 3] - clip.m[ 1]; m_Planes[TOP][1] = clip.m[ 7] - clip.m[ 5]; m_Planes[TOP][2] = clip.m[11] - clip.m[ 9]; m_Planes[TOP][3] = clip.m[15] - clip.m[13]; NormalizePlane(TOP); m_Planes[NEAR][0] = clip.m[ 3] + clip.m[ 2]; m_Planes[NEAR][1] = clip.m[ 7] + clip.m[ 6]; m_Planes[NEAR][2] = clip.m[11] + clip.m[10]; m_Planes[NEAR][3] = clip.m[15] + clip.m[14]; NormalizePlane(NEAR); m_Planes[FAR][0] = clip.m[ 3] - clip.m[ 2]; m_Planes[FAR][1] = clip.m[ 7] - clip.m[ 6]; m_Planes[FAR][2] = clip.m[11] - clip.m[10]; m_Planes[FAR][3] = clip.m[15] - clip.m[14]; NormalizePlane(FAR); } void NormalizePlane(int side) { float length = 1.0/(float)sqrt(m_Planes[side][0] * m_Planes[side][0] + m_Planes[side][1] * m_Planes[side][1] + m_Planes[side][2] * m_Planes[side][2]); m_Planes[side][0] *= length; m_Planes[side][1] *= length; m_Planes[side][2] *= length; m_Planes[side][3] *= length; } And check against it with: bool PointInFrustum(float x, float y, float z) { for(int i = 0; i < 6; i++) { if( m_Planes[i][0] * x + m_Planes[i][1] * y + m_Planes[i][2] * z + m_Planes[i][3] <= 0 ) return false; } return true; } Then i render using: camera->Update(); UpdateFrustum(); int numCulled = 0; for(int i = 0; i < (int)meshes.size(); i++) { if(!PointInFrustum(meshCenter.x, meshCenter.y, meshCenter.z)) { meshes[i]->SetDraw(false); numCulled++; } else meshes[i]->SetDraw(true); } Matrices look like (Camera is at (5, 0, 0)): ModelView [0,0,0.99,0] [0,1,0,0] [-0.99,0,0,0] [0,0,-5,1] Projection [0.814,0,0,0] [0,1.303,0,0] [0,0,-1,0] [0,0,-0.02,0] Clip [0,0,-1,-0.999] [0,1.30,0,0] [-0.814,0,0,0] [0,0,4.98,4.99] What am i doing wrong?

  Read the article

• Investigating on xVelocity (VertiPaq) column size

  - by Marco Russo (SQLBI)

    In January I published an article about how to optimize high cardinality columns in VertiPaq. In the meantime, VertiPaq has been rebranded to xVelocity: the official name is now “xVelocity in-memory analytics engine (VertiPaq)” but using xVelocity and VertiPaq when we talk about Analysis Services has the same meaning. In this post I’ll show how to investigate on columns size of an existing Tabular database so that you can find the most important columns to be optimized. A first approach can be looking in the DataDir of Analysis Services and look for the folder containing the database. Then, look for the biggest files in all subfolders and you will find the name of a file that contains the name of the most expensive column. However, this heuristic process is not very optimized. A better approach is using a DMV that provides the exact information. For example, by using the following query (open SSMS, open an MDX query on the database you are interested to and execute it) you will see all database objects sorted by used size in a descending way. SELECT * FROM $SYSTEM.DISCOVER_STORAGE_TABLE_COLUMN_SEGMENTS ORDER BY used_size DESC You can look at the first rows in order to understand what are the most expensive columns in your tabular model. The interesting data provided are: TABLE_ID: it is the name of the object – it can be also a dictionary or an index COLUMN_ID: it is the column name the object belongs to – you can also see ID_TO_POS and POS_TO_ID in case they refer to internal indexes RECORDS_COUNT: it is the number of rows in the column USED_SIZE: it is the used memory for the object By looking at the ration between USED_SIZE and RECORDS_COUNT you can understand what you can do in order to optimize your tabular model. Your options are: Remove the column. Yes, if it contains data you will never use in a query, simply remove the column from the tabular model Change granularity. If you are tracking time and you included milliseconds but seconds would be enough, round the data source column to the nearest second. If you have a floating point number but two decimals are good enough (i.e. the temperature), round the number to the nearest decimal is relevant to you. Split the column. Create two or more columns that have to be combined together in order to produce the original value. This technique is described in VertiPaq optimization article. Sort the table by that column. When you read the data source, you might consider sorting data by this column, so that the compression will be more efficient. However, this technique works better on columns that don’t have too many distinct values and you will probably move the problem to another column. Sorting data starting from the lower density columns (those with a few number of distinct values) and going to higher density columns (those with high cardinality) is the technique that provides the best compression ratio. After the optimization you should be able to reduce the used size and improve the count/size ration you measured before. If you are interested in a longer discussion about internal storage in VertiPaq and you want understand why this approach can save you space (and time), you can attend my 24 Hours of PASS session “VertiPaq Under the Hood” on March 21 at 08:00 GMT.

  Read the article

• Issues glVertexAttribPointer last 2 parameters?

  - by NoobScratcher

  Introduction Hello I will start out by explaining my setup, showing samples as I go along explaining the situation. I'm using these tools: OpenGL 3.3 GLSL 330 C++ Problem The problem is when I render the wavefront obj 3d model it gives a very weird visual glitch the model was supposed to be a square but instead its a triangluated mess with parts of the vertexes pointing in a stretched direction in massive amounts towards the bottom left side of the frustum.... Explanation: I'm using std::vectors to store my wavefront .obj model data using sscanf to get the floating point values into the structure members x,y,z and store them into the Points structure variable p; int index = IndexAssigner(1, 1); ifstream file (list[index].c_str() ); points.push_back(Point()); Point p; int face[4]; while (!file.eof() ) { char modelbuffer[10000]; file.getline(modelbuffer, 10000); switch(modelbuffer[0]) { case 'v' : sscanf(modelbuffer, "v %f %f %f", &p.x, &p.y, &p.z); points.push_back(p); break; case 'f': sscanf(modelbuffer, "f %d %d %d %d", face, face+1, face+2, face+3 ); faces.push_back(face[0]); faces.push_back(face[1]); faces.push_back(face[2]); faces.push_back(face[3]); } //Turn on FileReader aka "RENDER CODE" FileReader = true; } then I render the Points vector using the .data() member of std::vectors to the frustum. Other declarations: int numfloats = 4; float* point=reinterpret_cast<float*>(&points[0]); int num_bytes=numfloats*sizeof(float); Vector declarations: struct Point {float x, y , z; }; std::vector<int>faces; std::vector<Point>points; Render code: glGenBuffers(1, &vertexbuffer); glGenTextures(1, &ModelTexture); glBindBuffer(GL_ARRAY_BUFFER, vertexbuffer); glBindTexture(GL_TEXTURE_3D, ModelTexture); glTexImage2D(GL_TEXTURE_2D, 0,GL_RGBA, ModelSurface->w, ModelSurface->h, 0, GL_BGR, GL_UNSIGNED_BYTE, ModelSurface->pixels); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glBufferData(GL_ARRAY_BUFFER, sizeof(points), points.data(), GL_STATIC_DRAW); glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE,num_bytes ,points.data()); glEnableVertexAttribArray(3); //Translation Process GLfloat TranslationMatrix[] = { 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 1.0, 0.0, 0.0, 0.0, 1.0 }; //Send Translation Matrix up to the vertex shader glUniformMatrix4fv(translation, 1, TRUE, TranslationMatrix); glDrawElements( GL_QUADS, faces.size(), GL_UNSIGNED_INT, faces.data()); I tried looking at what was causing this and went through every function every parameter ,etc looked at the man pages. Then found out that it could be my glVertexAttribPointer. Here are the man pages for glVertexAttribPointer http://www.opengl.org/sdk/docs/man/xhtml/glVertexAttribPointer.xml The last 2 parameters is my problem How do I write those 2 last parameters do I try putting the data from Points into it?. glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE,num_bytes ,points.data()); How does it work with vectors? Is it fast?* if you can not be bothered too look at the man pages here is the scripts coming from the man pages directly. Stride Specifies the byte offset between consecutive generic vertex attributes. If stride is 0, the generic vertex attributes are understood to be tightly packed in the array. The initial value is 0. Pointer Specifies a pointer to the first component of the first generic vertex attribute in the array. The initial value is 0. If you want my full source - http://ideone.com/fPfkg Thanks Again if you do read this.

  Read the article

• Investigating on xVelocity (VertiPaq) column size

  - by Marco Russo (SQLBI)

    In January I published an article about how to optimize high cardinality columns in VertiPaq. In the meantime, VertiPaq has been rebranded to xVelocity: the official name is now “xVelocity in-memory analytics engine (VertiPaq)” but using xVelocity and VertiPaq when we talk about Analysis Services has the same meaning. In this post I’ll show how to investigate on columns size of an existing Tabular database so that you can find the most important columns to be optimized. A first approach can be looking in the DataDir of Analysis Services and look for the folder containing the database. Then, look for the biggest files in all subfolders and you will find the name of a file that contains the name of the most expensive column. However, this heuristic process is not very optimized. A better approach is using a DMV that provides the exact information. For example, by using the following query (open SSMS, open an MDX query on the database you are interested to and execute it) you will see all database objects sorted by used size in a descending way. SELECT * FROM $SYSTEM.DISCOVER_STORAGE_TABLE_COLUMN_SEGMENTS ORDER BY used_size DESC You can look at the first rows in order to understand what are the most expensive columns in your tabular model. The interesting data provided are: TABLE_ID: it is the name of the object – it can be also a dictionary or an index COLUMN_ID: it is the column name the object belongs to – you can also see ID_TO_POS and POS_TO_ID in case they refer to internal indexes RECORDS_COUNT: it is the number of rows in the column USED_SIZE: it is the used memory for the object By looking at the ration between USED_SIZE and RECORDS_COUNT you can understand what you can do in order to optimize your tabular model. Your options are: Remove the column. Yes, if it contains data you will never use in a query, simply remove the column from the tabular model Change granularity. If you are tracking time and you included milliseconds but seconds would be enough, round the data source column to the nearest second. If you have a floating point number but two decimals are good enough (i.e. the temperature), round the number to the nearest decimal is relevant to you. Split the column. Create two or more columns that have to be combined together in order to produce the original value. This technique is described in VertiPaq optimization article. Sort the table by that column. When you read the data source, you might consider sorting data by this column, so that the compression will be more efficient. However, this technique works better on columns that don’t have too many distinct values and you will probably move the problem to another column. Sorting data starting from the lower density columns (those with a few number of distinct values) and going to higher density columns (those with high cardinality) is the technique that provides the best compression ratio. After the optimization you should be able to reduce the used size and improve the count/size ration you measured before. If you are interested in a longer discussion about internal storage in VertiPaq and you want understand why this approach can save you space (and time), you can attend my 24 Hours of PASS session “VertiPaq Under the Hood” on March 21 at 08:00 GMT.

  Read the article

• The five steps of business intelligence adoption: where are you?

  - by Red Gate Software BI Tools Team

  When I was in Orlando and New York last month, I spoke to a lot of business intelligence users. What they told me suggested a path of BI adoption. The user’s place on the path depends on the size and sophistication of their organisation. Step 1: A company with a database of customer transactions will often want to examine particular data, like revenue and unit sales over the last period for each product and territory. To do this, they probably use simple SQL queries or stored procedures to produce data on demand. Step 2: The results from step one are saved in an Excel document, so business users can analyse them with filters or pivot tables. Alternatively, SQL Server Reporting Services (SSRS) might be used to generate a report of the SQL query for display on an intranet page. Step 3: If these queries are run frequently, or business users want to explore data from multiple sources more freely, it may become necessary to create a new database structured for analysis rather than CRUD (create, retrieve, update, and delete). For example, data from more than one system — plus external information — may be incorporated into a data warehouse. This can become ‘one source of truth’ for the business’s operational activities. The warehouse will probably have a simple ‘star’ schema, with fact tables representing the measures to be analysed (e.g. unit sales, revenue) and dimension tables defining how this data is aggregated (e.g. by time, region or product). Reports can be generated from the warehouse with Excel, SSRS or other tools. Step 4: Not too long ago, Microsoft introduced an Excel plug-in, PowerPivot, which allows users to bring larger volumes of data into Excel documents and create links between multiple tables.  These BISM Tabular documents can be created by the database owners or other expert Excel users and viewed by anyone with Excel PowerPivot. Sometimes, business users may use PowerPivot to create reports directly from the primary database, bypassing the need for a data warehouse. This can introduce problems when there are misunderstandings of the database structure or no single ‘source of truth’ for key data. Step 5: Steps three or four are often enough to satisfy business intelligence needs, especially if users are sophisticated enough to work with the warehouse in Excel or SSRS. However, sometimes the relationships between data are too complex or the queries which aggregate across periods, regions etc are too slow. In these cases, it can be necessary to formalise how the data is analysed and pre-build some of the aggregations. To do this, a business intelligence professional will typically use SQL Server Analysis Services (SSAS) to create a multidimensional model — or “cube” — that more simply represents key measures and aggregates them across specified dimensions. Step five is where our tool, SSAS Compare, becomes useful, as it helps review and deploy changes from development to production. For us at Red Gate, the primary value of SSAS Compare is to establish a dialog with BI users, so we can develop a portfolio of products that support creation and deployment across a range of report and model types. For example, PowerPivot and the new BISM Tabular model create a potential customer base for tools that extend beyond BI professionals. We’re interested in learning where people are in this story, so we’ve created a six-question survey to find out. Whether you’re at step one or step five, we’d love to know how you use BI so we can decide how to build tools that solve your problems. So if you have a sixty seconds to spare, tell us on the survey!

  Read the article

• Setting up your project

  - by ssoolsma

  Before any coding we first make sure that the project is setup correctly. (Please note, that this blog is all about how I do it, and incase i forget, i can return here and read how i used to do it. Maybe you come up with some idea’s for yourself too.) In these series we will create a minigolf scoring cart. Please note that we eventually create a fully functional application which you cannot use unless you pay me alot of money! (And i mean alot!)   1. Download and install the appropriate tools. Download the following: - TestDriven.Net (free version on the bottom of the download page) - nUnit TestDriven is a visual studio plugin for many unittest frameworks, which allows you to run  / test code very easily with a right click –> run test. nUnit is the test framework of choice, it works seamless with TestDriven.   2. Create your project Fire up visual studio and create your DataAccess project:  MidgetWidget.DataAccess is it’s name. (I choose MidgetWidget as name for the solution). Also, make sure that the MidgetWidget.DataAccess project is a c# ClassLibary Hit OK to create the solution. (in the above example the checkbox Create directory for solution is checked, because i’m pointing the location to the root of c:\development where i want MidgetWidget to be created.   3. Setup the database. You should have thought about a database when you reach this point. Let’s assume that you’ve created a database as followed: Table name: LoginKey Fields: Id (PK), KeyName (uniqueidentifier), StartDate (datetime), EndDate (datetime) Table name:  Party Fields: Id (PK), Key (uniqueidentifier, Created (datetime) Table name:  Person Fields: Id(PK),  PartyId (int), Name (varchar) Tablename: Score Fields: Id (PK), Trackid (int), PersonId (int), Strokes (int) Tablename: Track Fields: Id (PK), Name (varchar) A few things to take note about the database setup. I’ve singularized all tablenames (not “Persons“ but “Person”. This is because in a few minutes, when this is in our code, we refer to the database objects as single rows. We retrieve a single Person not a single “Persons” from the database.   4. Create the entity framework In your solution tree create a new folder and call it “DataModel”. Inside this folder: Add new item –> and choose ADO.NET Entity Data Model. Name it “Entities.edmx” and hit  “Add”. Once the edmx is added, open it (double click) and right click the white area and choose “Update model from database…". Now, point it to your database (i include sensitive data in the connectionstring) and select all the tables. After that hit “Finish” and let the entity framework do it’s code generation. Et Voila, after a few seconds you have set up your entity model. Next post we will start building the data-access! I’m off to the beach.

  Read the article

• I.T. Chargeback : Core to Cloud Computing

  - by Anand Akela

  Contributed by Mark McGill Consolidation and Virtualization have been widely adopted over the years to help deliver benefits such as increased server utilization, greater agility and lower cost to the I.T. organization. These are key enablers of cloud, but in themselves they do not provide a complete cloud solution. Building a true enterprise private cloud involves moving from an admin driven world, where the I.T. department is ultimately responsible for the provisioning of servers, databases, middleware and applications, to a world where the consumers of I.T. resources can provision their infrastructure, platforms and even complete application stacks on demand. Switching from an admin-driven provisioning model to a user-driven model creates some challenges. How do you ensure that users provisioning resources will not provision more than they need? How do you encourage users to return resources when they have finished with them so that others can use them? While chargeback has existed as a concept for many years (especially in mainframe environments), it is the move to this self-service model that has created a need for a new breed of chargeback applications for cloud. Enabling self-service without some form of chargeback is like opening a shop where all of the goods are free. A successful chargeback solution will be able to allocate the costs of shared I.T. infrastructure based on the relative consumption by the users. Doing this creates transparency between the I.T. department and the consumers of I.T. When users are able to understand how their consumption translates to cost they are much more likely to be prudent when it comes to their use of I.T. resources. This also gives them control of their I.T. costs, as moderate usage will translate to a lower charge at the end of the month. Implementing Chargeback successfully create a win-win situation for I.T. and the consumers. Chargeback can help to ensure that I.T. resources are used for activities that deliver business value. It also improves the overall utilization of I.T. infrastructure as I.T. resources that are not needed are not left running idle. Enterprise Manager 12c provides an integrated metering and chargeback solution for Enterprise Manager Targets. This solution is built on top of the rich configuration and utilization information already available in Enterprise Manager. It provides metering not just for virtual machines, but also for physical hosts, databases and middleware. Enterprise Manager 12c provides metering based on the utilization and configuration of the following types of Enterprise Manager Target: Oracle VM Host Oracle Database Oracle WebLogic Server Using Enterprise Manager Chargeback, administrators are able to create a set of Charge Plans that are used to attach prices to the various metered resources. These plans can contain fixed costs (eg. $10/month/database), configuration based costs (eg. $10/month if OS is Windows) and utilization based costs (eg. $0.05/GB of Memory/hour) The self-service user provisioning these resources is then able to view a report that details their usage and helps them understand how this usage translates into cost. Armed with this information, the user is able to determine if the resources are delivering adequate business value based on what is being charged. Figure 1: Chargeback in Self-Service Portal Enterprise Manager 12c provides a variety of additional interfaces into this data. The administrator can access summary and trending reports. Summary reports allow the administrator to drill-down through the cost center hierarchy to identify, for example, the top resource consumers across the organization. Figure 2: Charge Summary Report Trending reports can be used for I.T. planning and budgeting as they show utilization and charge trends over a period of time. Figure 3: CPU Trend Report We also provide chargeback reports through BI Publisher. This provides a way for users who do not have an Enterprise Manager login (such as Line of Business managers) to view charge and usage information. For situations where a bill needs to be produced, chargeback can be integrated with billing applications such as Oracle Billing and Revenue Management (BRM). Further information on Enterprise Manager 12c’s integrated metering and chargeback: White Paper Screenwatch Cloud Management on OTN

  Read the article

• Multiple Zend application code organisation

  - by user966936

  For the past year I have been working on a series of applications all based on the Zend framework and centered on a complex business logic that all applications must have access to even if they don't use all (easier than having multiple library folders for each application as they are all linked together with a common center). Without going into much detail about what the project is specifically about, I am looking for some input (as I am working on the project alone) on how I have "grouped" my code. I have tried to split it all up in such a way that it removes dependencies as much as possible. I'm trying to keep it as decoupled as I logically can, so in 12 months time when my time is up anyone else coming in can have no problem extending on what I have produced. Example structure: applicationStorage\ (contains all applications and associated data) applicationStorage\Applications\ (contains the applications themselves) applicationStorage\Applications\external\ (application grouping folder) (contains all external customer access applications) applicationStorage\Applications\external\site\ (main external customer access application) applicationStorage\Applications\external\site\Modules\ applicationStorage\Applications\external\site\Config\ applicationStorage\Applications\external\site\Layouts\ applicationStorage\Applications\external\site\ZendExtended\ (contains extended Zend classes specific to this application example: ZendExtended_Controller_Action extends zend_controller_Action ) applicationStorage\Applications\external\mobile\ (mobile external customer access application different workflow limited capabilities compared to full site version) applicationStorage\Applications\internal\ (application grouping folder) (contains all internal company applications) applicationStorage\Applications\internal\site\ (main internal application) applicationStorage\Applications\internal\mobile\ (mobile access has different flow and limited abilities compared to main site version) applicationStorage\Tests\ (contains PHP unit tests) applicationStorage\Library\ applicationStorage\Library\Service\ (contains all business logic, services and servicelocator; these are completely decoupled from Zend framework and rely on models' interfaces) applicationStorage\Library\Zend\ (Zend framework) applicationStorage\Library\Models\ (doesn't know services but is linked to Zend framework for DB operations; contains model interfaces and model datamappers for all business objects; examples include Iorder/IorderMapper, Iworksheet/IWorksheetMapper, Icustomer/IcustomerMapper) (Note: the Modules, Config, Layouts and ZendExtended folders are duplicated in each application folder; but i have omitted them as they are not required for my purposes.) For the library this contains all "universal" code. The Zend framework is at the heart of all applications, but I wanted my business logic to be Zend-framework-independent. All model and mapper interfaces have no public references to Zend_Db but actually wrap around it in private. So my hope is that in the future I will be able to rewrite the mappers and dbtables (containing a Models_DbTable_Abstract that extends Zend_Db_Table_Abstract) in order to decouple my business logic from the Zend framework if I want to move my business logic (services) to a non-Zend framework environment (maybe some other PHP framework). Using a serviceLocator and registering the required services within the bootstrap of each application, I can use different versions of the same service depending on the request and which application is being accessed. Example: all external applications will have a service_auth_External implementing service_auth_Interface registered. Same with internal aplications with Service_Auth_Internal implementing service_auth_Interface Service_Locator::getService('Auth'). I'm concerned I may be missing some possible problems with this. One I'm half-thinking about is a config.ini file for all externals, then a separate application config.ini overriding or adding to the global external config.ini. If anyone has any suggestions I would be greatly appreciative. I have used contextswitching for AJAX functions within the individual applications, but there is a big chance both external and internal will get web services created for them. Again, these will be separated due to authorization and different available services. \applicationstorage\Applications\internal\webservice \applicationstorage\Applications\external\webservice

  Read the article

• Inkscape: what are "line" objects?

  - by Peter Mortensen

  What is a "line" object in Inkscape? Drawing lines in Inkscape is by using the tool "Draw Bezier curves and straight lines (Shift+F6)". This creates objects of another type, "path". Using Inkscape: is there a way to convert an object of type "line" into an object of the more general type "path"? I have imported a drawing (mostly lines, rectangles and text) that has been through Adobe Illustrator: originally made in Inkscape, imported into Illustrator, edited, saved from Illustrator as SVG, imported into Inkscape. Sample from the imported SVG file: <path id="path5855" stroke="#000000" d=" M320.198,275.935" /> <line fill="none" stroke="#000000" x1="348.553" y1="45.097" x2="348.553" y2="185.346" id="line3368" /> Update 1: I have inspected the original XML (SVG) file from 2006 and it does not contain any "line" XML tags. Thus it must be a crime of Adobe Illustrator. When a line is selected in this imported SVG file the bottom panel displays: "Line in root. Click selection to toggle scale/rotation handles.". When a line is selected that was drawn in Inkscape the bottom panel displays: "Path (2 nodes) in Layer 1. Click selection to toggle scale/rotation handles." What is the difference between "line" and "path"? Is "line" some kind of read-only/non-editable object? A generic term like "line" is not easy to use in search, but I have now found the definitions for "line" and "path": SVG line: http://www.w3schools.com/svg/svg_line.asp SVG path: http://www.w3schools.com/svg/svg_path.asp Platform: Inkscape v0.46 (2008-03-10), Windows XP 64 bit, 8 GB RAM.

  Read the article

• Problems with ipsec betwen Cisco ASA 5505 and Juniper ssg5

  - by Oskar Kjellin

  I am trying to set up an ipsec tunnel between our ASA 5505 and a Juniper ssg5. The tunnel is up and running, but I cannot get any data through it. The local network I am on is 172.16.1.0 and the remote is 192.168.70.0. But I cannot ping anything on their netowork. I receive a "Phase 2 OK" when I set up the ipsec. I think this is the part of the config that is applicable. It seems like the data is not routed through the tunnel, but I am not sure... object network our-network subnet 172.16.1.0 255.255.255.0 object network their-network subnet 192.168.70.0 255.255.255.0 access-list outside_cryptomap extended permit ip object our-network object their-network crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 1 match address outside_cryptomap crypto map outside_map 1 set pfs crypto map outside_map 1 set peer THEIR_IP crypto map outside_map 1 set ikev1 phase1-mode aggressive crypto map outside_map 1 set ikev1 transform-set ESP-3DES-MD5 crypto map outside_map 1 set ikev2 pre-shared-key ***** crypto map outside_map 1 set reverse-route crypto map outside_map interface outside webvpn group-policy GroupPolicy_THEIR_IP internal group-policy GroupPolicy_THEIR_IP attributes vpn-filter value outside_cryptomap ipv6-vpn-filter none vpn-tunnel-protocol ikev1 tunnel-group THEIR_IP type ipsec-l2l tunnel-group THEIR_IP general-attributes default-group-policy GroupPolicy_THEIR_IP tunnel-group THEIR_IP ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key *****

  Read the article

• Help me please with this error

  - by Brandon

  I setup IIS. I moved my folder with all the files to the IIS directory. Now when I go to http://localhost/thefolder I get: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B) Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)] Luxand.FSDK.ActivateLibrary(String LicenseKey) +0 FaceRecognition._Default.Page_Load(Object sender, EventArgs e) in D:\Project Details\Layne Projects\DotNet Project\FaceRecognition\FaceRecognition\Default.aspx.cs:60 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +25 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +42 System.Web.UI.Control.OnLoad(EventArgs e) +132 System.Web.UI.Control.LoadRecursive() +66 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2428

  Read the article

• Windows Server task manager displays much higher memory use than sum of all processes' working set s

  - by Sleepless

  I have a 16 GB Windows Server 2008 x64 machine mostly running SQL Server 2008. The free memory as seen in Task Manager is very low (128 MB at the moment), i.e. about 15.7 GB are used. So far, so good. Now when I try to narrow down the process(es) using the most memory I get confused: None of the processes have more than 200MB Working Set Size as displayed in the 'Processes' tab of Task Manager. Well, maybe the Working Set Size isn't the relevant counter? To figure that out I used a PowerShell command [1] to sum up each individual property of the process object in sort of a brute force approach - surely one of them must add up to the 15.7 GB, right? Turns out none of them does, with the closest being VirtualMemorySize (around 12.7 GB) and PeakVirtualMemorySize (around 14.7 GB). WTF? To put it another way: Which of the numerous memory related process information is the "correct" one, i.e. counts towards the server's physical memory as displayed in the Task Manager's 'Performance' tab? Thank you all! [1] $erroractionpreference="silentlycontinue"; get-process | gm | where-object {$.membertype -eq "Property"} | foreach-object {$.name; (get-process | measure-object -sum $_.name ).sum / 1MB}

  Read the article

• WPF TreeView MouseDown

  - by imekon

  I've got something like this in a TreeView: <DataTemplate x:Key="myTemplate"> <StackPanel MouseDown="OnItemMouseDown"> ... </StackPanel> </DataTemplate> Using this I get the mouse down events if I click on items in the stack panel. However... there seems to be another item behind the stack panel that is the TreeViewItem - it's very hard to hit, but not impossible, and that's when the problems start to occur. I had a go at handling PreviewMouseDown on TreeViewItem, however that seems to require e.Handled = false otherwise standard tree view behaviour stops working. Ok, Here's the source code... MainWindow.xaml <Window x:Class="WPFMultiSelectTree.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="clr-namespace:WPFMultiSelectTree" Title="Multiple Selection Tree" Height="300" Width="300"> <Window.Resources> <!-- Declare the classes that convert bool to Visibility --> <local:VisibilityConverter x:Key="visibilityConverter"/> <local:VisibilityInverter x:Key="visibilityInverter"/> <!-- Set the style for any tree view item --> <Style TargetType="TreeViewItem"> <Style.Triggers> <DataTrigger Binding="{Binding Selected}" Value="True"> <Setter Property="Background" Value="DarkBlue"/> <Setter Property="Foreground" Value="White"/> </DataTrigger> </Style.Triggers> <EventSetter Event="PreviewMouseDown" Handler="OnTreePreviewMouseDown"/> </Style> <!-- Declare a hierarchical data template for the tree view items --> <HierarchicalDataTemplate x:Key="RecursiveTemplate" ItemsSource="{Binding Children}"> <StackPanel Margin="2" Orientation="Horizontal" MouseDown="OnTreeMouseDown"> <Ellipse Width="12" Height="12" Fill="Green"/> <TextBlock Margin="2" Text="{Binding Name}" Visibility="{Binding Editing, Converter={StaticResource visibilityInverter}}"/> <TextBox Margin="2" Text="{Binding Name}" KeyDown="OnTextBoxKeyDown" IsVisibleChanged="OnTextBoxIsVisibleChanged" Visibility="{Binding Editing, Converter={StaticResource visibilityConverter}}"/> <TextBlock Margin="2" Text="{Binding Index, StringFormat=({0})}"/> </StackPanel> </HierarchicalDataTemplate> <!-- Declare a simple template for a list box --> <DataTemplate x:Key="ListTemplate"> <TextBlock Text="{Binding Name}"/> </DataTemplate> </Window.Resources> <Grid> <!-- Declare the rows in this grid --> <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition/> <RowDefinition Height="Auto"/> <RowDefinition/> </Grid.RowDefinitions> <!-- The first header --> <TextBlock Grid.Row="0" Margin="5" Background="PowderBlue">Multiple selection tree view</TextBlock> <!-- The tree view --> <TreeView Name="m_tree" Margin="2" Grid.Row="1" ItemsSource="{Binding Children}" ItemTemplate="{StaticResource RecursiveTemplate}"/> <!-- The second header --> <TextBlock Grid.Row="2" Margin="5" Background="PowderBlue">The currently selected items in the tree</TextBlock> <!-- The list box --> <ListBox Name="m_list" Margin="2" Grid.Row="3" ItemsSource="{Binding .}" ItemTemplate="{StaticResource ListTemplate}"/> </Grid> </Window> MainWindow.xaml.cs /// <summary> /// Interaction logic for MainWindow.xaml /// </summary> public partial class MainWindow : Window { private Container m_root; private Container m_first; private ObservableCollection<Container> m_selection; private string m_current; /// <summary> /// Constructor /// </summary> public MainWindow() { InitializeComponent(); m_selection = new ObservableCollection<Container>(); m_root = new Container("root"); for (int parents = 0; parents < 50; parents++) { Container parent = new Container(String.Format("parent{0}", parents + 1)); for (int children = 0; children < 1000; children++) { parent.Add(new Container(String.Format("child{0}", children + 1))); } m_root.Add(parent); } m_tree.DataContext = m_root; m_list.DataContext = m_selection; m_first = null; } /// <summary> /// Has the shift key been pressed? /// </summary> private bool ShiftPressed { get { return Keyboard.IsKeyDown(Key.LeftShift) || Keyboard.IsKeyDown(Key.RightShift); } } /// <summary> /// Has the control key been pressed? /// </summary> private bool CtrlPressed { get { return Keyboard.IsKeyDown(Key.LeftCtrl) || Keyboard.IsKeyDown(Key.RightCtrl); } } /// <summary> /// Clear down the selection list /// </summary> private void DeselectAndClear() { foreach(Container container in m_selection) { container.Selected = false; } m_selection.Clear(); } /// <summary> /// Add the container to the list (if not already present), /// mark as selected /// </summary> /// <param name="container"></param> private void AddToSelection(Container container) { if (container == null) { return; } foreach (Container child in m_selection) { if (child == container) { return; } } container.Selected = true; m_selection.Add(container); } /// <summary> /// Remove container from list, mark as not selected /// </summary> /// <param name="container"></param> private void RemoveFromSelection(Container container) { m_selection.Remove(container); container.Selected = false; } /// <summary> /// Process single click on a tree item /// /// Normally just select an item /// /// SHIFT-Click extends selection /// CTRL-Click toggles a selection /// </summary> /// <param name="sender"></param> private void OnTreeSingleClick(object sender) { FrameworkElement element = sender as FrameworkElement; if (element != null) { Container container = element.DataContext as Container; if (container != null) { if (CtrlPressed) { if (container.Selected) { RemoveFromSelection(container); } else { AddToSelection(container); } } else if (ShiftPressed) { if (container.Parent == m_first.Parent) { if (container.Index < m_first.Index) { Container item = container; for (int i = container.Index; i < m_first.Index; i++) { AddToSelection(item); item = item.Next; if (item == null) { break; } } } else if (container.Index > m_first.Index) { Container item = m_first; for (int i = m_first.Index; i <= container.Index; i++) { AddToSelection(item); item = item.Next; if (item == null) { break; } } } } } else { DeselectAndClear(); m_first = container; AddToSelection(container); } } } } /// <summary> /// Process double click on tree item /// </summary> /// <param name="sender"></param> private void OnTreeDoubleClick(object sender) { FrameworkElement element = sender as FrameworkElement; if (element != null) { Container container = element.DataContext as Container; if (container != null) { container.Editing = true; m_current = container.Name; } } } /// <summary> /// Clicked on the stack panel in the tree view /// /// Double left click: /// /// Switch to editing mode (flips visibility of textblock and textbox) /// </summary> /// <param name="sender"></param> /// <param name="e"></param> private void OnTreeMouseDown(object sender, MouseButtonEventArgs e) { Debug.WriteLine("StackPanel mouse down"); switch(e.ChangedButton) { case MouseButton.Left: switch (e.ClickCount) { case 2: OnTreeDoubleClick(sender); e.Handled = true; break; } break; } } /// <summary> /// Clicked on tree view item in tree /// </summary> /// <param name="sender"></param> /// <param name="e"></param> private void OnTreePreviewMouseDown(object sender, MouseButtonEventArgs e) { Debug.WriteLine("TreeViewItem preview mouse down"); switch (e.ChangedButton) { case MouseButton.Left: switch (e.ClickCount) { case 1: { // We've had a single click on a tree view item // Unfortunately this is the WHOLE tree item, including the +/- // symbol to the left. The tree doesn't do a selection, so we // have to filter this out... MouseDevice device = e.Device as MouseDevice; Debug.WriteLine(String.Format("Tree item clicked on: {0}", device.DirectlyOver.GetType().ToString())); // This is bad. The whole point of WPF is for the code // not to know what the UI has - yet here we are testing for // it as a workaround. Sigh... if (device.DirectlyOver.GetType() != typeof(Path)) { OnTreeSingleClick(sender); } // Cannot say handled - if we do it stops the tree working! //e.Handled = true; } break; } break; } } /// <summary> /// Key press in text box /// /// Return key finishes editing /// Escape key finishes editing, restores original value (this doesn't work!) /// </summary> /// <param name="sender"></param> /// <param name="e"></param> private void OnTextBoxKeyDown(object sender, KeyEventArgs e) { switch(e.Key) { case Key.Return: { TextBox box = sender as TextBox; if (box != null) { Container container = box.DataContext as Container; if (container != null) { container.Editing = false; e.Handled = true; } } } break; case Key.Escape: { TextBox box = sender as TextBox; if (box != null) { Container container = box.DataContext as Container; if (container != null) { container.Editing = false; container.Name = m_current; e.Handled = true; } } } break; } } /// <summary> /// When text box becomes visible, grab focus and select all text in it. /// </summary> /// <param name="sender"></param> /// <param name="e"></param> private void OnTextBoxIsVisibleChanged(object sender, DependencyPropertyChangedEventArgs e) { bool visible = (bool)e.NewValue; if (visible) { TextBox box = sender as TextBox; if (box != null) { box.Focus(); box.SelectAll(); } } } } Here's the Container class public class Container : INotifyPropertyChanged { private string m_name; private ObservableCollection<Container> m_children; private Container m_parent; private bool m_selected; private bool m_editing; /// <summary> /// Constructor /// </summary> /// <param name="name">name of object</param> public Container(string name) { m_name = name; m_children = new ObservableCollection<Container>(); m_parent = null; m_selected = false; m_editing = false; } /// <summary> /// Name of object /// </summary> public string Name { get { return m_name; } set { if (m_name != value) { m_name = value; OnPropertyChanged("Name"); } } } /// <summary> /// Index of object in parent's children /// /// If there's no parent, the index is -1 /// </summary> public int Index { get { if (m_parent != null) { return m_parent.Children.IndexOf(this); } return -1; } } /// <summary> /// Get the next item, assuming this is parented /// /// Returns null if end of list reached, or no parent /// </summary> public Container Next { get { if (m_parent != null) { int index = Index + 1; if (index < m_parent.Children.Count) { return m_parent.Children[index]; } } return null; } } /// <summary> /// List of children /// </summary> public ObservableCollection<Container> Children { get { return m_children; } } /// <summary> /// Selected status /// </summary> public bool Selected { get { return m_selected; } set { if (m_selected != value) { m_selected = value; OnPropertyChanged("Selected"); } } } /// <summary> /// Editing status /// </summary> public bool Editing { get { return m_editing; } set { if (m_editing != value) { m_editing = value; OnPropertyChanged("Editing"); } } } /// <summary> /// Parent of this object /// </summary> public Container Parent { get { return m_parent; } set { m_parent = value; } } /// <summary> /// WPF Property Changed event /// </summary> public event PropertyChangedEventHandler PropertyChanged; /// <summary> /// Handler to inform WPF that a property has changed /// </summary> /// <param name="name"></param> private void OnPropertyChanged(string name) { if (PropertyChanged != null) { PropertyChanged(this, new PropertyChangedEventArgs(name)); } } /// <summary> /// Add a child to this container /// </summary> /// <param name="child"></param> public void Add(Container child) { m_children.Add(child); child.m_parent = this; } /// <summary> /// Remove a child from this container /// </summary> /// <param name="child"></param> public void Remove(Container child) { m_children.Remove(child); child.m_parent = null; } } The two classes VisibilityConverter and VisibilityInverter are implementations of IValueConverter that translates bool to Visibility. They make sure the TextBlock is displayed when not editing, and the TextBox is displayed when editing.

  Read the article

• These are few objective type questions which i was not able to find the solution [closed]

  - by Tarun

  1. Which of the following advantages does System.Collections.IDictionaryEnumerator provide over System.Collections.IEnumerator? a. It adds properties for direct access to both the Key and the Value b. It is optimized to handle the structure of a Dictionary. c. It provides properties to determine if the Dictionary is enumerated in Key or Value order d. It provides reverse lookup methods to distinguish a Key from a specific Value 2. When Implementing System.EnterpriseServices.ServicedComponent derived classes, which of the following statements are true? a. Enabling object pooling requires an attribute on the class and the enabling of pooling in the COM+ catalog. b. Methods can be configured to automatically mark a transaction as complete by the use of attributes. c. You can configure authentication using the AuthenticationOption when the ActivationMode is set to Library. d. You can control the lifecycle policy of an individual instance using the SetLifetimeService method. 3. Which of the following are true regarding event declaration in the code below? class Sample { event MyEventHandlerType MyEvent; } a. MyEventHandlerType must be derived from System.EventHandler or System.EventHandler<TEventArgs> b. MyEventHandlerType must take two parameters, the first of the type Object, and the second of a class derived from System.EventArgs c. MyEventHandlerType may have a non-void return type d. If MyEventHandlerType is a generic type, event declaration must use a specialization of that type. e. MyEventHandlerType cannot be declared static 4. Which of the following statements apply to developing .NET code, using .NET utilities that are available with the SDK or Visual Studio? a. Developers can create assemblies directly from the MSIL Source Code. b. Developers can examine PE header information in an assembly. c. Developers can generate XML Schemas from class definitions contained within an assembly. d. Developers can strip all meta-data from managed assemblies. e. Developers can split an assembly into multiple assemblies. 5. Which of the following characteristics do classes in the System.Drawing namespace such as Brush,Font,Pen, and Icon share? a. They encapsulate native resource and must be properly Disposed to prevent potential exhausting of resources. b. They are all MarshalByRef derived classes, but functionality across AppDomains has specific limitations. c. You can inherit from these classes to provide enhanced or customized functionality 6. Which of the following are required to be true by objects which are going to be used as keys in a System.Collections.HashTable? a. They must handle case-sensitivity identically in both the GetHashCode() and Equals() methods. b. Key objects must be immutable for the duration they are used within a HashTable. c. Get HashCode() must be overridden to provide the same result, given the same parameters, regardless of reference equalityl unless the HashTable constructor is provided with an IEqualityComparer parameter. d. Each Element in a HashTable is stored as a Key/Value pair of the type System.Collections.DictionaryElement e. All of the above 7. Which of the following are true about Nullable types? a. A Nullable type is a reference type. b. A Nullable type is a structure. c. An implicit conversion exists from any non-nullable value type to a nullable form of that type. d. An implicit conversion exists from any nullable value type to a non-nullable form of that type. e. A predefined conversion from the nullable type S? to the nullable type T? exists if there is a predefined conversion from the non-nullable type S to the non-nullable type T 8. When using an automatic property, which of the following statements is true? a. The compiler generates a backing field that is completely inaccessible from the application code. b. The compiler generates a backing field that is a private instance member with a leading underscore that can be programmatically referenced. c. The compiler generates a backing field that is accessible via reflection d. The compiler generates a code that will store the information separately from the instance to ensure its security. 9. Which of the following does using Initializer Syntax with a collection as shown below require? CollectionClass numbers = new CollectionClass { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 }; a. The Collection Class must implement System.Collections.Generic.ICollection<T> b. The Collection Class must implement System.Collections.Generic.IList<T> c. Each of the Items in the Initializer List will be passed to the Add<T>(T item) method d. The items in the initializer will be treated as an IEnumerable<T> and passed to the collection constructor+K110 10. What impact will using implicitly typed local variables as in the following example have? var sample = "Hello World"; a. The actual type is determined at compilation time, and has no impact on the runtime b. The actual type is determined at runtime, and late binding takes effect c. The actual type is based on the native VARIANT concept, and no binding to a specific type takes place. d. "var" itself is a specific type defined by the framework, and no special binding takes place 11. Which of the following is not supported by remoting object types? a. well-known singleton b. well-known single call c. client activated d. context-agile 12. In which of the following ways do structs differ from classes? a. Structs can not implement interfaces b. Structs cannot inherit from a base struct c. Structs cannot have events interfaces d. Structs cannot have virtual methods 13. Which of the following is not an unboxing conversion? a. void Sample1(object o) { int i = (int)o; } b. void Sample1(ValueType vt) { int i = (int)vt; } c. enum E { Hello, World} void Sample1(System.Enum et) { E e = (E) et; } d. interface I { int Value { get; set; } } void Sample1(I vt) { int i = vt.Value; } e. class C { public int Value { get; set; } } void Sample1(C vt) { int i = vt.Value; } 14. Which of the following are characteristics of the System.Threading.Timer class? a. The method provided by the TimerCallback delegate will always be invoked on the thread which created the timer. b. The thread which creates the timer must have a message processing loop (i.e. be considered a UI thread) c. The class contains protection to prevent reentrancy to the method provided by the TimerCallback delegate d. You can receive notification of an instance being Disposed by calling an overload of the Dispose method. 15. What is the proper declaration of a method which will handle the following event? Class MyClass { public event EventHandler MyEvent; } a. public void A_MyEvent(object sender, MyArgs e) { } b. public void A_MyEvent(object sender, EventArgs e) { } c. public void A_MyEvent(MyArgs e) { } d. public void A_MyEvent(MyClass sender,EventArgs e) { } 16. Which of the following scenarios are applicable to Window Workflow Foundation? a. Document-centric workflows b. Human workflows c. User-interface page flows d. Builtin support for communications across multiple applications and/or platforms e. All of the above 17. When using an automatic property, which of the following statements is true? a. The compiler generates a backing field that is completely inaccessible from the application code. b. The compiler generates a backing field that is a private instance member with a leading underscore that can be programmatically referenced. c. The compiler generates a backing field that is accessible via reflection d. The compiler generates a code that will store the information separately from the instance to ensure its security. 18 While using the capabilities supplied by the System.Messaging classes, which of the following are true? a. Information must be explicitly converted to/from a byte stream before it uses the MessageQueue class b. Invoking the MessageQueue.Send member defaults to using the System.Messaging.XmlMessageFormatter to serialize the object. c. Objects must be XMLSerializable in order to be transferred over a MessageQueue instance. d. The first entry in a MessageQueue must be removed from the queue before the next entry can be accessed e. Entries removed from a MessageQueue within the scope of a transaction, will be pushed back into the front of the queue if the transaction fails. 19. Which of the following are true about declarative attributes? a. They must be inherited from the System.Attribute. b. Attributes are instantiated at the same time as instances of the class to which they are applied. c. Attribute classes may be restricted to be applied only to application element types. d. By default, a given attribute may be applied multiple times to the same application element. 20. When using version 3.5 of the framework in applications which emit a dynamic code, which of the following are true? a. A Partial trust code can not emit and execute a code b. A Partial trust application must have the SecurityCriticalAttribute attribute have called Assert ReflectionEmit permission c. The generated code no more permissions than the assembly which emitted it. d. It can be executed by calling System.Reflection.Emit.DynamicMethod( string name, Type returnType, Type[] parameterTypes ) without any special permissions Within Windows Workflow Foundation, Compensating Actions are used for: a. provide a means to rollback a failed transaction b. provide a means to undo a successfully committed transaction later c. provide a means to terminate an in process transaction d. achieve load balancing by adapting to the current activity 21. What is the proper declaration of a method which will handle the following event? Class MyClass { public event EventHandler MyEvent; } a. public void A_MyEvent(object sender, MyArgs e) { } b. public void A_MyEvent(object sender, EventArgs e) { } c. public void A_MyEvent(MyArgs e) { } d. public void A_MyEvent(MyClass sender,EventArgs e) { } 22. Which of the following controls allows the use of XSL to transform XML content into formatted content? a. System.Web.UI.WebControls.Xml b. System.Web.UI.WebControls.Xslt c. System.Web.UI.WebControls.Substitution d. System.Web.UI.WebControls.Transform 23. To which of the following do automatic properties refer? a. You declare (explicitly or implicitly) the accessibility of the property and get and set accessors, but do not provide any implementation or backing field b. You attribute a member field so that the compiler will generate get and set accessors c. The compiler creates properties for your class based on class level attributes d. They are properties which are automatically invoked as part of the object construction process 24. Which of the following are true about Nullable types? a. A Nullable type is a reference type. b. An implicit conversion exists from any non-nullable value type to a nullable form of that type. c. A predefined conversion from the nullable type S? to the nullable type T? exists if there is a predefined conversion from the non-nullable type S to the non-nullable type T 25. When using an automatic property, which of the following statements is true? a. The compiler generates a backing field that is completely inaccessible from the application code. b. The compiler generates a backing field that is accessible via reflection. c. The compiler generates a code that will store the information separately from the instance to ensure its security. 26. When using an implicitly typed array, which of the following is most appropriate? a. All elements in the initializer list must be of the same type. b. All elements in the initializer list must be implicitly convertible to a known type which is the actual type of at least one member in the initializer list c. All elements in the initializer list must be implicitly convertible to common type which is a base type of the items actually in the list 27. Which of the following is false about anonymous types? a. They can be derived from any reference type. b. Two anonymous types with the same named parameters in the same order declared in different classes have the same type. c. All properties of an anonymous type are read/write. 28. Which of the following are true about Extension methods. a. They can be declared either static or instance members b. They must be declared in the same assembly (but may be in different source files) c. Extension methods can be used to override existing instance methods d. Extension methods with the same signature for the same class may be declared in multiple namespaces without causing compilation errors

  Read the article

• SQLAuthority News – Best Practices for Data Warehousing with SQL Server 2008 R2

  - by pinaldave

  An integral part of any BI system is the data warehouse—a central repository of data that is regularly refreshed from the source systems. The new data is transferred at regular intervals  by extract, transform, and load (ETL) processes. This whitepaper talks about what are best practices for Data Warehousing. This whitepaper discusses ETL, Analysis, Reporting as well relational database. The main focus of this whitepaper is on mainly ‘architecture’ and ‘performance’. Download Best Practices for Data Warehousing with SQL Server 2008 R2 Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Best Practices, Data Warehousing, PostADay, SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• An easy way to create Side by Side registrationless COM Manifests with Visual Studio

  - by Rick Strahl

  Here's something I didn't find out until today: You can use Visual Studio to easily create registrationless COM manifest files for you with just a couple of small steps. Registrationless COM lets you use COM component without them being registered in the registry. This means it's possible to deploy COM components along with another application using plain xcopy semantics. To be sure it's rarely quite that easy - you need to watch out for dependencies - but if you know you have COM components that are light weight and have no or known dependencies it's easy to get everything into a single folder and off you go. Registrationless COM works via manifest files which carry the same name as the executable plus a .manifest extension (ie. yourapp.exe.manifest) I'm going to use a Visual FoxPro COM object as an example and create a simple Windows Forms app that calls the component - without that component being registered. Let's take a walk down memory lane… Create a COM Component I start by creating a FoxPro COM component because that's what I know and am working with here in my legacy environment. You can use VB classic or C++ ATL object if that's more to your liking. Here's a real simple Fox one: DEFINE CLASS SimpleServer as Session OLEPUBLIC FUNCTION HelloWorld(lcName) RETURN "Hello " + lcName ENDDEFINE Compile it into a DLL COM component with: BUILD MTDLL simpleserver FROM simpleserver RECOMPILE And to make sure it works test it quickly from Visual FoxPro: server = CREATEOBJECT("simpleServer.simpleserver") MESSAGEBOX( server.HelloWorld("Rick") ) Using Visual Studio to create a Manifest File for a COM Component Next open Visual Studio and create a new executable project - a Console App or WinForms or WPF application will all do. Go to the References Node Select Add Reference Use the Browse tab and find your compiled DLL to import  Next you'll see your assembly in the project. Right click on the reference and select Properties Click on the Isolated DropDown and select True Compile and that's all there's to it. Visual Studio will create a App.exe.manifest file right alongside your application's EXE. The manifest file created looks like this: xml version="1.0" encoding="utf-8"? assembly xsi:schemaLocation="urn:schemas-microsoft-com:asm.v1 assembly.adaptive.xsd" manifestVersion="1.0" xmlns:asmv1="urn:schemas-microsoft-com:asm.v1" xmlns:asmv2="urn:schemas-microsoft-com:asm.v2" xmlns:asmv3="urn:schemas-microsoft-com:asm.v3" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#" xmlns:co.v1="urn:schemas-microsoft-com:clickonce.v1" xmlns:co.v2="urn:schemas-microsoft-com:clickonce.v2" xmlns="urn:schemas-microsoft-com:asm.v1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" assemblyIdentity name="App.exe" version="1.0.0.0" processorArchitecture="x86" type="win32" / file name="simpleserver.DLL" asmv2:size="27293" hash xmlns="urn:schemas-microsoft-com:asm.v2" dsig:Transforms dsig:Transform Algorithm="urn:schemas-microsoft-com:HashTransforms.Identity" / dsig:Transforms dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" / dsig:DigestValuepuq+ua20bbidGOWhPOxfquztBCU=dsig:DigestValue hash typelib tlbid="{f10346e2-c9d9-47f7-81d1-74059cc15c3c}" version="1.0" helpdir="" resourceid="0" flags="HASDISKIMAGE" / comClass clsid="{af2c2811-0657-4264-a1f5-06d033a969ff}" threadingModel="Apartment" tlbid="{f10346e2-c9d9-47f7-81d1-74059cc15c3c}" progid="simpleserver.SimpleServer" description="simpleserver.SimpleServer" / file assembly Now let's finish our super complex console app to test with: using System; using System.Collections.Generic; using System.Text; namespace ConsoleApplication1 {     class Program     {         static voidMain(string[] args)         { Type type = Type.GetTypeFromProgID("simpleserver.simpleserver",true); dynamic server = Activator.CreateInstance(type); Console.WriteLine(server.HelloWorld("rick")); Console.ReadLine(); } } } Now run the Console Application… As expected that should work. And why not? The COM component is still registered, right? :-) Nothing tricky about that. Let's unregister the COM component and then re-run and see what happens. Go to the Command Prompt Change to the folder where the DLL is installed Unregister with: RegSvr32 -u simpleserver.dll      To be sure that the COM component no longer works, check it out with the same test you used earlier (ie. o = CREATEOBJECT("SimpleServer.SimpleServer") in your development environment or VBScript etc.). Make sure you run the EXE and you don't re-compile the application or else Visual Studio will complain that it can't find the COM component in the registry while compiling. In fact now that we have our .manifest file you can remove the COM object from the project. When you run run the EXE from Windows Explorer or a command prompt to avoid the recompile. Watch out for embedded Manifest Files Now recompile your .NET project and run it… and it will most likely fail! The problem is that .NET applications by default embeds a manifest file into the compiled EXE application which results in the externally created manifest file being completely ignored. Only one manifest can be applied at a time and the compiled manifest takes precedency. Uh, thanks Visual Studio - not very helpful… Note that if you use another development tool like Visual FoxPro to create your EXE this won't be an issue as long as the tool doesn't automatically add a manifest file. Creating a Visual FoxPro EXE for example will work immediately with the generated manifest file as is. If you are using .NET and Visual Studio you have a couple of options of getting around this: Remove the embedded manifest file Copy the contents of the generated manifest file into a project manifest file and compile that in To remove an embedded manifest in a Visual Studio project: Open the Project Properties (Alt-Enter on project node) Go down to Resources | Manifest and select | Create Application without a Manifest   You can now add use the external manifest file and it will actually be respected when the app runs. The other option is to let Visual Studio create the manifest file on disk and then explicitly add the manifest file into the project. Notice on the dialog above I did this for app.exe.manifest and the manifest actually shows up in the list. If I select this file it will be compiled into the EXE and be used in lieu of any external files and that works as well. Remove the simpleserver.dll reference so you can compile your code and run the application. Now it should work without COM registration of the component. Personally I prefer external manifests because they can be modified after the fact - compiled manifests are evil in my mind because they are immutable - once they are there they can't be overriden or changed. So I prefer an external manifest. However, if you are absolutely sure nothing needs to change and you don't want anybody messing with your manifest, you can also embed it. The option to either is there. Watch for Manifest Caching While working trying to get this to work I ran into some problems at first. Specifically when it wasn't working at first (due to the embedded schema) I played with various different manifest layouts in different files etc.. There are a number of different ways to actually represent manifest files including offloading to separate folder (more on that later). A few times I made deliberate errors in the schema file and I found that regardless of what I did once the app failed or worked no amount of changing of the manifest file would make it behave differently. It appears that Windows is caching the manifest data for a given EXE or DLL. It takes a restart or a recompile of either the EXE or the DLL to clear the caching. Recompile your servers in order to see manifest changes unless there's an outright failure of an invalid manifest file. If the app starts the manifest is being read and caches immediately. This can be very confusing especially if you don't know that it's happening. I found myself always recompiling the exe after each run and before making any changes to the manifest file. Don't forget about Runtimes of COM Objects In the example I used above I used a Visual FoxPro COM component. Visual FoxPro is a runtime based environment so if I'm going to distribute an application that uses a FoxPro COM object the runtimes need to be distributed as well. The same is true of classic Visual Basic applications. Assuming that you don't know whether the runtimes are installed on the target machines make sure to install all the additional files in the EXE's directory alongside the COM DLL. In the case of Visual FoxPro the target folder should contain: The EXE  App.exe The Manifest file (unless it's compiled in) App.exe.manifest The COM object DLL (simpleserver.dll) Visual FoxPro Runtimes: VFP9t.dll (or VFP9r.dll for non-multithreaded dlls), vfp9rENU.dll, msvcr71.dll All these files should be in the same folder. Debugging Manifest load Errors If you for some reason get your manifest loading wrong there are a couple of useful tools available - SxSTrace and SxSParse. These two tools can be a huge help in debugging manifest loading errors. Put the following into a batch file (SxS_Trace.bat for example): sxstrace Trace -logfile:sxs.bin sxstrace Parse -logfile:sxs.bin -outfile:sxs.txt Then start the batch file before running your EXE. Make sure there's no caching happening as described in the previous section. For example, if I go into the manifest file and explicitly break the CLSID and/or ProgID I get a detailed report on where the EXE is looking for the manifest and what it's reading. Eventually the trace gives me an error like this: INFO: Parsing Manifest File C:\wwapps\Conf\SideBySide\Code\app.EXE.     INFO: Manifest Definition Identity is App.exe,processorArchitecture="x86",type="win32",version="1.0.0.0".     ERROR: Line 13: The value {AAaf2c2811-0657-4264-a1f5-06d033a969ff} of attribute clsid in element comClass is invalid. ERROR: Activation Context generation failed. End Activation Context Generation. pinpointing nicely where the error lies. Pay special attention to the various attributes - they have to match exactly in the different sections of the manifest file(s). Multiple COM Objects The manifest file that Visual Studio creates is actually quite more complex than is required for basic registrationless COM object invokation. The manifest file can be simplified a lot actually by stripping off various namespaces and removing the type library references altogether. Here's an example of a simplified manifest file that actually includes references to 2 COM servers: xml version="1.0" encoding="utf-8"? assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0" assemblyIdentity name="App.exe" version="1.0.0.0" processorArchitecture="x86" type="win32" / file name="simpleserver.DLL" comClass clsid="{af2c2811-0657-4264-a1f5-06d033a969ff}" threadingModel="Apartment" progid="simpleserver.SimpleServer" description="simpleserver.SimpleServer" / file file name = "sidebysidedeploy.dll" comClass clsid="{EF82B819-7963-4C36-9443-3978CD94F57C}" progid="sidebysidedeploy.SidebysidedeployServer" description="SidebySideDeploy Server" threadingModel="apartment" / file assembly Simple enough right? Routing to separate Manifest Files and Folders In the examples above all files ended up in the application's root folder - all the DLLs, support files and runtimes. Sometimes that's not so desirable and you can actually create separate manifest files. The easiest way to do this is to create a manifest file that 'routes' to another manifest file in a separate folder. Basically you create a new 'assembly identity' via a named id. You can then create a folder and another manifest with the id plus .manifest that points at the actual file. In this example I create: App.exe.manifest A folder called App.deploy A manifest file in App.deploy All DLLs and runtimes in App.deploy Let's start with that master manifest file. This file only holds a reference to another manifest file: App.exe.manifest xml version="1.0" encoding="UTF-8" standalone="yes"? assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0" assemblyIdentity name="App.exe" version="1.0.0.0" processorArchitecture="x86" type="win32" / dependency dependentAssembly assemblyIdentity name="App.deploy" version="1.0.0.0" type="win32" / dependentAssembly dependency assembly   Note this file only contains a dependency to App.deploy which is another manifest id. I can then create App.deploy.manifest in the current folder or in an App.deploy folder. In this case I'll create App.deploy and in it copy the DLLs and support runtimes. I then create App.deploy.manifest. App.deploy.manifest xml version="1.0" encoding="UTF-8" standalone="yes"? assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0" assemblyIdentity name="App.deploy" type="win32" version="1.0.0.0" / file name="simpleserver.DLL" comClass clsid="{af2c2811-0657-4264-a1f5-06d033a969ff}" threadingModel="Apartment" progid="simpleserver.SimpleServer" description="simpleserver.SimpleServer" / file file name="sidebysidedeploy.dll" comClass clsid="{EF82B819-7963-4C36-9443-3978CD94F57C}" threadingModel="Apartment" progid="sidebysidedeploy.SidebysidedeployServer" description="SidebySideDeploy Server" / file assembly   In this manifest file I then host my COM DLLs and any support runtimes. This is quite useful if you have lots of DLLs you are referencing or if you need to have separate configuration and application files that are associated with the COM object. This way the operation of your main application and the COM objects it interacts with is somewhat separated. You can see the two folders here:   Routing Manifests to different Folders In theory registrationless COM should be pretty easy in painless - you've seen the configuration manifest files and it certainly doesn't look very complicated, right? But the devil's in the details. The ActivationContext API (SxS - side by side activation) is very intolerant of small errors in the XML or formatting of the keys, so be really careful when setting up components, especially if you are manually editing these files. If you do run into trouble SxsTrace/SxsParse are a huge help to track down the problems. And remember that if you do have problems that you'll need to recompile your EXEs or DLLs for the SxS APIs to refresh themselves properly. All of this gets even more fun if you want to do registrationless COM inside of IIS :-) But I'll leave that for another blog post…© Rick Strahl, West Wind Technologies, 2005-2011Posted in COM  .NET  FoxPro   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Creating an ASP.NET report using Visual Studio 2010 - Part 3

  - by rajbk

  We continue building our report in this three part series. Creating an ASP.NET report using Visual Studio 2010 - Part 1 Creating an ASP.NET report using Visual Studio 2010 - Part 2 Adding the ReportViewer control and filter drop downs. Open the source code for index.aspx and add a ScriptManager control. This control is required for the ReportViewer control. Add a DropDownList for the categories and suppliers. Add the ReportViewer control. The markup after these steps is shown below. <div> <asp:ScriptManager ID="smScriptManager" runat="server"> </asp:ScriptManager> <div id="searchFilter"> Filter by: Category : <asp:DropDownList ID="ddlCategories" runat="server" /> and Supplier : <asp:DropDownList ID="ddlSuppliers" runat="server" /> </div> <rsweb:ReportViewer ID="rvProducts" runat="server"> </rsweb:ReportViewer> </div> The design view for index.aspx is shown below. The dropdowns will display the categories and suppliers in the database. Changing the selection in the drop downs will cause the report to be filtered by the selections in the dropdowns. You will see how to do this in the next steps.   Attaching the RDLC to the ReportViewer control by clicking on the top right of the control, going to Report Viewer tasks and selecting Products.rdlc.   Resize the ReportViewer control by dragging at the bottom right corner. I set mine to 800px x 500px. You can also set this value in source view. Defining the data sources. We will now define the Data Source used to populate the report. Go back to the “ReportViewer Tasks” and select “Choose Data Sources” Select a “New data source..” Select “Object” and name your Data Source ID “odsProducts”   In the next screen, choose “ProductRepository” as your business object. Choose “GetProductsProjected” in the next screen.   The method requires a SupplierID and CategoryID. We will set these so that our data source gets the values from the drop down lists we defined earlier. Set the parameter source to be of type “Control” and set the ControlIDs to be ddlSuppliers and ddlCategories respectively. Your screen will look like this: We are now going to define the data source for our drop downs. Select the ddlCategory drop down and pick “Choose Data Source”. Pick “Object” and give it an id “odsCategories”   In the next screen, choose “ProductRepository” Select the GetCategories() method in the next screen.   Select “CategoryName” and “CategoryID” in the next screen. We are done defining the data source for the Category drop down. Perform the same steps for the Suppliers drop down.   Select each dropdown and set the AppendDataBoundItems to true and AutoPostback to true.     The AppendDataBoundItems is needed because we are going to insert an “All“ list item with a value of empty. Go to each drop down and add this list item markup as shown below> Finally, double click on each drop down in the designer and add the following code in the code behind. This along with the “Autopostback= true” attribute refreshes the report anytime a drop down is changed. protected void ddlCategories_SelectedIndexChanged(object sender, EventArgs e) { rvProducts.LocalReport.Refresh(); }   protected void ddlSuppliers_SelectedIndexChanged(object sender, EventArgs e) { rvProducts.LocalReport.Refresh(); } Compile your report and run the page. You should see the report rendered. Note that the tool bar in the ReportViewer control gives you a couple of options including the ability to export the data to Excel, PDF or word.   Conclusion Through this three part series, we did the following: Created a data layer for use by our RDLC. Created an RDLC using the report wizard and define a dataset for the report. Used the report design surface to design our report including adding a chart. Used the ReportViewer control to attach the RDLC. Connected our ReportWiewer to a data source and take parameter values from the drop downlists. Used AutoPostBack to refresh the reports when the dropdown selection was changed. RDLCs allow you to create interactive reports including drill downs and grouping. For even more advanced reports you can use Microsoft® SQL Server™ Reporting Services with RDLs. With RDLs, the report is rendered on the report server instead of the web server. Another nice thing about RDLs is that you can define a parameter list for the report and it gets rendered automatically for you. RDLCs and RDLs both have their advantages and its best to compare them and choose the right one for your requirements. Download VS2010 RTM Sample project NorthwindReports.zip   Alfred Borden: Are you watching closely?

  Read the article

• Entity Framework 4.0: Creating objects of correct type when using lazy loading

  - by DigiMortal

  In my posting about Entity Framework 4.0 and POCOs I introduced lazy loading in EF applications. EF uses proxy classes for lazy loading and this means we have new types in that come and go dynamically in runtime. We don’t have these types available when we write code but we cannot forget that EF may expect us to use dynamically generated types. In this posting I will give you simple hint how to use correct types in your code. The background of lazy loading and proxy classes As a first thing I will explain you in short what is proxy class. Business classes when designed correctly have no knowledge about their birth and death – they don’t know how they are created and they don’t know how their data is persisted. This is the responsibility of object runtime. When we use lazy loading we need a little bit different classes that know how to load data for properties when code accesses the property first time. As we cannot add this functionality to our business classes (they may be stored through more than one data access technology or by more than one Data Access Layer (DAL)) we create proxy classes that extend our business classes. If we have class called Product and product has lazy loaded property called Customer then we need proxy class, let’s say ProductProxy, that has same public signature as Product so we can use it INSTEAD OF product in our code. ProductProxy overrides Customer property. If customer is not asked then customer is null. But if we ask for Customer property then overridden property of ProductProxy loads it from database. This is how lazy loading works. Problem – two types for same thing As lazy loading may introduce dynamically generated proxy types we don’t know in our application code which type is returned. We cannot be sure that we have Product not ProductProxy returned. This leads us to the following question: how can we create Product of correct type if we don’t know the correct type? In EF solution is simple. Solution – use factory methods If you are using repositories and you are not using factories (imho it is pretty pointless with mapper) you can add factory methods to your EF based repositories. Take a look at this class. public class Event {     public int ID { get; set; }     public string Title { get; set; }     public string Location { get; set; }     public virtual Party Organizer { get; set; }     public DateTime Date { get; set; } } We have virtual member called Organizer. This property is virtual because we want to use lazy loading on this class so Organizer is loaded only when we ask it. EF provides us with method called CreateObject<T>(). CreateObject<T>() is member of ObjectContext class and it creates the object based on given type. In runtime proxy type for Event is created for us automatically and when we call CreateObject<T>() for Event it returns as object of Event proxy type. The factory method for events repository is as follows. public Event CreateEvent() {     var evt = _context.CreateObject<Event>();     return evt; } And we are done. Instead of creating factory classes we created factory methods that guarantee that created objects are of correct type. Conclusion Although lazy loading introduces some new objects we cannot use at design time because they live only in runtime we can write code without worrying about exact implementation type of object. This holds true until we have clean code and we don’t make any decisions based on object type. EF4.0 provides us with very simple factory method that create and return objects of correct type. All we had to do was adding factory methods to our repositories.

  Read the article

• 100,000 complex structures that are accessed frequently by 100,000 users

  - by Saad

  If you are required to store 100,000 complex structures that are accessed frequently by 100,000 users, which of the following solutions would you use and why? Memcached, In-code python objects, Redis, or a relational database (MySQL). With the little knowledge that I have I think that memcached and In-code python object will not store permanent persistent data. so they don't qualify as the right answer for such a problem. And for complex data structures its best to use Redis. Please correct me if I am wrong.

  Read the article

< Previous Page | 477 478 479 480 481 482 483 484 485 486 487 488  | Next Page >